What is TechPilot?

TechPilot is the leading online market-
place in Europe for purchasers and suppliers
in the manufacturing industry.

Not registered yet?

If you want to find about what’s going on in the marketplace right now, use our free access.

Fabricators: Germany

The following Fabricators Germany offer Punching / nibbling, punched parts, nibbled parts services:

select all companies / deselect all companies
  • - Bending / folding
  • - Clinching
  • - Combined forming laser cutting / punching
  • - Laser cutting 2D
  • - Punching / nibbling
  • - Bending / folding
  • - Blacking
  • - Chrome-plating
  • - Combined forming laser cutting / punching
  • - Electromechanical assembly
  • - Galvanizing
  • - Industrial / On-site-assembly
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Inert gas shielded arc welding (TIG)
  • - Laser cutting 2D
  • - Manual electrode welding
  • - Measuring / testing
  • - Mechanical assembly
  • - Phosphatizing
  • - Plate straightening
  • - Power-coating
  • - Punching / nibbling
  • - Punching / pressing (Out-of-tool)
  • - Robot welding
  • - Spot welding
  • - Stud welding
  • - Surfacing / build-up welding
  • - Bending / folding
  • - Inert gas shielded arc welding (TIG)
  • - Plate rolling / bending
  • - Punching / nibbling
  • - Shearing (rectangular blank/strip)
  • - Shearing (round blank)
  • - Belt grinding
  • - Bending / folding
  • - Combined forming laser cutting / punching
  • - Laser cutting 2D
  • - Laser cutting, tube & section
  • - Plate straightening
  • - Punching / nibbling
  • - Shearing (rectangular blank/strip)
  • - Vibratory grinding
  • - Bending / folding
  • - Laser cutting 2D
  • - Punching / nibbling

Lasercutting, Punching, Bending as well as welding in all mondern procedures are our specials. We are the typical jop shoppers in thin sheetmetall structures , small and middle housings, mashine parts , brackets and optical covers to protect your Konstructions or represent them in Steel, Alloy or Inox are our loved specials. We accept all solid or DXF information.

  • - Bending / folding
  • - Combined forming laser cutting / punching
  • - Laser cutting 2D
  • - Punching / nibbling
  • - Shearing (rectangular blank/strip)
  • - Combined forming laser cutting / punching
  • - Laser cutting 2D
  • - Punching / nibbling
  • - Punching / pressing (Out-of-tool)
  • - Bending / folding
  • - Blacking
  • - Drilling / threading / tapping
  • - Electromechanical assembly
  • - Form milling (3 D)
  • - Laser cutting 2D
  • - Mechanical assembly
  • - Plate rolling / bending
  • - Plate straightening
  • - Power-coating
  • - Punching / nibbling
  • - Surface milling (2 1/2 D)
  • - Annealing
  • - Annealing / tempering
  • - Coordinate jig grinding
  • - Deep-drawing die making
  • - Drawing die making
  • - Embossing die / swage / letter roller making
  • - Fineblanking / pressing
  • - Fineblanking tool making
  • - Follow-on composite tool making
  • - Hardening
  • - Hardening and tempering
  • - Impact extrusion die making
  • - Mechanical assembly
  • - Precision grinding
  • - Punching / nibbling
  • - Punching / pressing (Out-of-tool)
  • - Punching and cutting tool making
  • - Punching-Forming
  • - Rapid prototyping (general)
  • - Spinning
  • - Surface grinding machine
  • - Surface lapping
  • - Vibratory grinding
  • - Bending / folding
  • - Combined forming laser cutting / punching
  • - Laser cutting 2D
  • - Power-coating
  • - Punching / nibbling
  • - Bending / folding
  • - Laser cutting 2D
  • - Punching / nibbling
  • - Bending / folding
  • - Combined forming laser cutting / punching
  • - Electromechanical assembly
  • - Gasketing / seal foaming
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Inert gas shielded arc welding (Plasma)
  • - Inert gas shielded arc welding (TIG)
  • - Laser cutting 2D
  • - Measuring / testing
  • - Mechanical assembly
  • - Power-coating
  • - Punching / nibbling
  • - Punching / pressing (Out-of-tool)
  • - Riveting
  • - Robot welding
  • - Sawing
  • - Shearing (rectangular blank/strip)
  • - Spot welding
  • - Spray-painting
  • - Stud welding
  • - Bending / folding
  • - Combined forming laser cutting / punching
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Inert gas shielded arc welding (TIG)
  • - Laser cutting 2D
  • - Laser cutting, tube & section
  • - Manual electrode welding
  • - Mechanical assembly
  • - Punching / nibbling
  • - Riveting
  • - Spot welding
  • - Stud welding
  • - Bending / folding
  • - Electromechanical assembly
  • - Laser cutting 2D
  • - Laser-beam welding
  • - Mechanical assembly
  • - Plate rolling / bending
  • - Power-coating
  • - Punching / nibbling
  • - Shearing (rectangular blank/strip)
  • - Bending / folding
  • - Combined forming laser cutting / punching
  • - Laser cutting 2D
  • - Punching / nibbling
  • - Abrasive blasting
  • - Bending / folding
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Laser cutting 2D
  • - Pickling
  • - Punching / nibbling
  • - Punching / pressing (Out-of-tool)
  • - Robot welding
  • - Bending / folding
  • - Mechanical assembly
  • - Punching / nibbling
  • - Bending / folding
  • - Combined forming laser cutting / punching
  • - Laser cutting 2D
  • - Punching / nibbling
  • - Water jet cutting 2D
  • - Bending / folding
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Inert gas shielded arc welding (TIG)
  • - Manual electrode welding
  • - Pipe bending
  • - Punching / nibbling
  • - Punching / pressing (Out-of-tool)
  • - Shearing (rectangular blank/strip)
  • - Surfacing / build-up welding
  • - Turning
  • - Abrasive blasting
  • - Abrasive cutting
  • - Annealing
  • - Annealing / tempering
  • - Anodizing
  • - Automatic turning (bar)
  • - Belt grinding
  • - Bending / folding
  • - Blacking
  • - Carbonitriding
  • - Carburizing
  • - Case hardening
  • - Chemical deburring
  • - Chromatizing
  • - Chrome-plating
  • - Combined forming plasma cutting / punching
  • - Combined machining turning / drilling / milling
  • - Continuous casting
  • - Coordinate jig grinding
  • - Deep-drawing
  • - Deep-drawing die making
  • - Deep-hole drilling
  • - Die replacement / wearing part manufacturing
  • - Drilling / threading / tapping
  • - Drop forging
  • - Electroforming
  • - Electromechanical assembly
  • - Electron-beam welding
  • - Electroplating
  • - Engraver milling
  • - Etching
  • - External cylindrical grinding
  • - Extruding
  • - Extrusion
  • - Extrusion welding
  • - Flame-hardening
  • - Folding
  • - Form milling (3 D)
  • - Galvanizing
  • - Gravity die casting
  • - HSC milling
  • - Hard turning
  • - Hardening
  • - Hardening and tempering
  • - Hot plate / Heated tool welding
  • - Impact extrusion die making
  • - Induction hardening
  • - Industrial / On-site-assembly
  • - Injection moulding
  • - Injection-mould around inserts
  • - Internal cylindrical grinding
  • - Investment casting
  • - Laser-beam welding
  • - Machining of extruded sections
  • - Measuring / testing
  • - Mechanical assembly
  • - Metal laser sintering
  • - Multi component injection moulding
  • - Nickel plating
  • - Nitriding processes
  • - Open die forging
  • - Oxidizing
  • - Pad printing
  • - Phosphatizing
  • - Pickling
  • - Plasma fusion cutting
  • - Power-coating
  • - Pressure die casting
  • - Punching / nibbling
  • - Punching / pressing (Out-of-tool)
  • - Punching and cutting tool making
  • - Punching-Forming
  • - Rapid prototyping (general)
  • - Riveting
  • - Rod extrusion die making
  • - Rod milling
  • - Sand blasting
  • - Sawing
  • - Screen printing
  • - Selective laser sintering
  • - Shearing (rectangular blank/strip)
  • - Shearing (round blank)
  • - Shot blasting
  • - Sintering
  • - Spark erosion countersinking (EDM)
  • - Spark erosion wire cutting (EDM)
  • - Spinning
  • - Spot welding
  • - Spray-painting
  • - Stereolithography (SLA)
  • - Stud welding
  • - Surface grinding machine
  • - Surface hardening (general)
  • - Surface milling (2 1/2 D)
  • - Swiss turning
  • - Thermoforming
  • - Thread grinding
  • - Thread rolling
  • - Turning
  • - Ultrasonic welding
  • - Upsetting
  • - Vibratory grinding
  • - Water jet cutting 2D
  • - Water jet cutting 3D
  • - Water jet cutting, tube & section
  • - Worm grinding

The G.W.P. AG (G.W.P. Inc.) is your across-the-method manufacturing service provider of choice for mechanical metal or plastic components. In addition to die casting (aluminium, zinc, magnesium) and plastic injection we offer all machining methods such as lathing, drilling, milling and grinding as well as metal sheet forming plus all common surface treatments. If desired, we provide complete subassemblies according to your requirements or even the waste package including packaging. In doing so, we go back to our network of qualified subcontractors as well as our own production facilities in China. In order to guarantee our high quality standards, our quality assurance department on site is permanently under the direction of a German engineer. We focus on manufacturing processes with relatively high basic costs such as mold costs. We offer enormous saving capacities especially for small and medium sized mass production series by outsourcing labor-intensive processes to China. We offer all necessary production steps as well as the production of complete subassemblies or waste packages and thus remarkably lower your production cost. If you wish to know more about our capacities and our potential – just call us!

  • - Bending / folding
  • - Centering / end facing
  • - Combined forming laser cutting / punching
  • - Drilling / threading / tapping
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Inert gas shielded arc welding (TIG)
  • - Laser cutting 2D
  • - Laser cutting, tube & section
  • - Laser depth engraving
  • - Laser marking / Laser inscription
  • - Laser-beam welding
  • - Plate straightening
  • - Power-coating
  • - Punching / nibbling
  • - Robot welding
  • - Surface milling (2 1/2 D)
  • - Bending / folding
  • - Blacking
  • - Combined forming laser cutting / punching
  • - Drilling / threading / tapping
  • - Electromechanical assembly
  • - Extruding
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Laser cutting 2D
  • - Laser cutting, tube & section
  • - Mechanical assembly
  • - Oxyacetylene cutting
  • - Pipe bending
  • - Power-coating
  • - Punching / nibbling
  • - Punching / pressing (Out-of-tool)
  • - Robot welding
  • - Sawing
  • - Shearing (rectangular blank/strip)
  • - Spot welding
  • - Spray-painting
  • - Stud welding
  • - Surfacing / build-up welding
  • - Wire bending
  • - Automatic turning (bar)
  • - Bending / folding
  • - Drilling / threading / tapping
  • - Drop forging
  • - Laser cutting 2D
  • - Power-coating
  • - Punching / nibbling
  • - Punching-Forming
  • - Robot welding
  • - Surface milling (2 1/2 D)
  • - Turning
  • - Deep-drawing
  • - Drilling / threading / tapping
  • - Form milling (3 D)
  • - Laser cutting 2D
  • - Laser cutting, tube & section
  • - Power-coating
  • - Punching / nibbling
  • - Punching / pressing (Out-of-tool)
  • - Robot welding
  • - Surface milling (2 1/2 D)
  • - Bending / folding
  • - Drilling / threading / tapping
  • - Form milling (3 D)
  • - Mechanical assembly
  • - Pipe bending
  • - Punching / nibbling
  • - Surface milling (2 1/2 D)
  • - Bending / folding
  • - Punching / nibbling
  • - Punching / pressing (Out-of-tool)
  • - Shearing (rectangular blank/strip)
  • - Laser cutting 2D
  • - Punching / nibbling
  • - Shearing (rectangular blank/strip)
  • - Bending / folding
  • - Drilling / threading / tapping
  • - Form milling (3 D)
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Laser cutting 2D
  • - Manual electrode welding
  • - Plasma fusion cutting
  • - Punching / nibbling
  • - Sawing
  • - Surface milling (2 1/2 D)
  • - Surfacing / build-up welding
  • - Abrasive blasting
  • - Bending / folding
  • - Machine frames / bases / racks
  • - Mechanical assembly
  • - Punching / nibbling
  • - Punching / pressing (Out-of-tool)
  • - Robot welding
  • - Shearing (rectangular blank/strip)
  • - Welded constructions (weldments)
  • - Bending / folding
  • - Deep-drawing
  • - Drilling / threading / tapping
  • - Form milling (3 D)
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Laser cutting 2D
  • - Laser-beam welding
  • - Manual electrode welding
  • - Punching / nibbling
  • - Sawing
  • - Seam welding
  • - Shearing (rectangular blank/strip)
  • - Spot welding
  • - Surface milling (2 1/2 D)
  • - Surfacing / build-up welding

  • - Bending / folding
  • - Form milling (3 D)
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Laser-beam welding
  • - Punching / nibbling
  • - Surface milling (2 1/2 D)
  • - Turning
  • - Bending / folding
  • - Combined forming laser cutting / punching
  • - Laser cutting 2D
  • - Laser cutting, tube & section
  • - Punching / nibbling

Laser processing for tubes/ pipes and profiles, Design, Laser cutting, Bending, Welding, Surface finishing Qualitätsmanagement, Quality management; certification according to DIN EN ISO 9001:2000 as of 2008

  • - Bending / folding
  • - Laser cutting 2D
  • - Plate straightening
  • - Punching / nibbling
  • - Riveting
  • - Abrasive blasting
  • - Belt grinding
  • - Bending / folding
  • - Combined forming laser cutting / punching
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Inert gas shielded arc welding (TIG)
  • - Laser cutting 2D
  • - Laser cutting, tube & section
  • - Manual electrode welding
  • - Mechanical assembly
  • - Pickling
  • - Plate straightening
  • - Punching / nibbling
  • - Water jet cutting 2D
  • - Bending / folding
  • - Combined forming laser cutting / punching
  • - Form milling (3 D)
  • - Laser cutting 2D
  • - Laser cutting 3D
  • - Laser cutting, tube & section
  • - Laser-beam welding
  • - Punching / nibbling
  • - Spot welding
  • - Surface milling (2 1/2 D)
  • - Water jet cutting 2D
  • - Bending / folding
  • - Combined forming laser cutting / punching
  • - Deep-drawing
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Inert gas shielded arc welding (Plasma)
  • - Inert gas shielded arc welding (TIG)
  • - Laser cutting 2D
  • - Laser cutting 3D
  • - Laser marking / Laser inscription
  • - Plate straightening
  • - Punching / nibbling
  • - Punching / pressing (Out-of-tool)
  • - Robot welding
  • - Spinning
  • - Spot welding
  • - Stud welding
  • - Bending / folding
  • - Combined forming laser cutting / punching
  • - Industrial / On-site-assembly
  • - Laser cutting 2D
  • - Laser cutting, tube & section
  • - Mechanical assembly
  • - Punching / nibbling
  • - Abrasive blasting
  • - Bending / folding
  • - Combined forming laser cutting / punching
  • - Drilling / threading / tapping
  • - Form milling (3 D)
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Inert gas shielded arc welding (TIG)
  • - Laser cutting 2D
  • - Power-coating
  • - Projection welding
  • - Punching / nibbling
  • - Robot welding
  • - Spot welding
  • - Spray-painting
  • - Stud welding
  • - Surface grinding machine
  • - Surface milling (2 1/2 D)
  • - Turning
  • - Vibratory grinding
  • - Automatic turning (bar)
  • - Bending / folding
  • - Drilling / threading / tapping
  • - Measuring / testing
  • - Mechanical assembly
  • - Punching / nibbling
  • - Punching / pressing (Out-of-tool)
  • - Sawing
  • - Surface grinding machine
  • - Surface milling (2 1/2 D)
  • - Turning
  • - Bending / folding
  • - Laser cutting 2D
  • - Laser cutting, tube & section
  • - Punching / nibbling
  • - Bending / folding
  • - Combined forming laser cutting / punching
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Inert gas shielded arc welding (TIG)
  • - Laser cutting 2D
  • - Laser cutting, tube & section
  • - Manual electrode welding
  • - Plate rolling / bending
  • - Punching / nibbling
  • - Spot welding
  • - Stud welding
  • - Surfacing / build-up welding
  • - Water jet cutting 2D
  • - Bending / folding
  • - Notching / coping
  • - Punching / nibbling
  • - Shearing (rectangular blank/strip)
  • - Shearing (round blank)
  • - Bending / folding
  • - Combined forming laser cutting / punching
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Inert gas shielded arc welding (TIG)
  • - Laser cutting 2D
  • - Laser cutting, tube & section
  • - Punching / nibbling
  • - Bending / folding
  • - Combined forming plasma cutting / punching
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Manual electrode welding
  • - Plasma fusion cutting
  • - Punching / nibbling
  • - Punching / pressing (Out-of-tool)
  • - Surfacing / build-up welding

With our modern machine park, our skilled operators will be able to produce a product to individuel specifications. Whether you need pressed or formed parts, special hinges or ties from iron or high-quality steel - we always do our best to meet your needs. A wide range of surface coatings are also available to provide special effects. We also offer the retail trade a complete programme of high quality fittings and hardware. We are able to deliver promptly, even in large quantities. We are pleased to help you when it comes to selecting the range of products you wish to offer, and we can also advise about presentation, and provide product displays to meet your specific needs.

  • - Bending / folding
  • - Combined forming laser cutting / punching
  • - Drilling / threading / tapping
  • - Electromechanical assembly
  • - Form milling (3 D)
  • - HSC milling
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Inert gas shielded arc welding (TIG)
  • - Laser cutting 2D
  • - Measuring / testing
  • - Punching / nibbling
  • - Punching / pressing (Out-of-tool)
  • - Sawing
  • - Shearing (rectangular blank/strip)
  • - Spot welding
  • - Surface milling (2 1/2 D)
  • - Bending / folding
  • - Drilling / threading / tapping
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Inert gas shielded arc welding (TIG)
  • - Laser cutting 2D
  • - Plate rolling / bending
  • - Punching / nibbling
  • - Shearing (rectangular blank/strip)
  • - Spot welding
  • - Stud welding
  • - Annealing
  • - Annealing / tempering
  • - Anodizing
  • - Assembly jigs and fixture making
  • - Cable preparation
  • - Chromatizing
  • - Clamping device making
  • - Combined forming laser cutting / punching
  • - Combined machining turning / drilling / milling
  • - Die replacement / wearing part manufacturing
  • - Drilling / threading / tapping
  • - Drilling milling jigs and fixture making
  • - Electromechanical assembly
  • - Electroplating
  • - Embossing die / swage / letter roller making
  • - External cylindrical grinding
  • - Follow-on composite tool making
  • - Form milling (3 D)
  • - Gauge making
  • - HSC milling
  • - Hardening
  • - Industrial / On-site-assembly
  • - Internal cylindrical grinding
  • - Laser cutting 2D
  • - Measuring / testing jigs and fixture making
  • - Mechanical assembly
  • - Pickling
  • - Pilot hole drilling (EDM)
  • - Power-coating
  • - Punching / nibbling
  • - Punching / pressing (Out-of-tool)
  • - Punching and cutting tool making
  • - Spark erosion countersinking (EDM)
  • - Spark erosion wire cutting (EDM)
  • - Spray-painting
  • - Surface grinding machine
  • - Surface milling (2 1/2 D)
  • - Swiss turning
  • - Turning
  • - Welding jigs and fixture making
  • - Bending / folding
  • - Cable preparation
  • - Combined forming laser cutting / punching
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Laser cutting 2D
  • - Power-coating
  • - Punching / nibbling
  • - Shearing (rectangular blank/strip)
  • - Spray-painting
  • - Stud welding

SAE Schaltanlagenbau Erfurt GmbH is your partner for machine and system controls that are wired to be connected as well as standard and customized sheet-steel control cabinets. We develop and manufacture complete electric switching stations for a wide range of applications in the sector of machine and plant construction. Our greatest strength is the production of customized, individual, and complex switchboard cabinets, control consoles, and equipment – individually tailored to our customers' specifications. We guarantee that our quality consistently conforms to standard DIN EN ISO 9001:2000. Our switchboard cabinets have the quality seal CE and come with a conformity and manufacturer certificate. Furthermore, we develop and manufacture according to North American standards and regulations. We are certified manufacturers of switchboard cabinets with UL and cUL seal of approval. Overview of our steel-sheet manufacturing services: » Standard-sized and customized casings and switchboard cabinets » Every switchboard cabinet and casing completely assembled » Modifications according to customer specifications » Production of casings and construction parts with minimal dimensional tolerance » Manufacture of diverse openings in the casings by means of laser-cutting technology » Batch size and storage production possible » Surface refinement according to customer specification: • Wet paint coating • Smooth powder coating • Structured powder coating • Galvanized coatings Our services in switchboard construction – an overview: » We produce complete switchboard stations according to your constructional drawings and specifications » We use high-quality machinery and components supplied by renowned European manufacturers » We will employ the equipment, components, and bus systems you specify » We wire switchboard cabinets according to wiring diagrams or wiring lists » We cut cables and wires to size on automated trimming and end-stop machines for efficient production » We produce and deliver machine wiring according to your type and measurement specifications, with or without stop plates and plugs » We use established labeling systems to mark machines, conductors, wires and cables (e.g. Weidmüller, Wago, Phoenix, Legrand) » We offer the complete electronic construction of your switchboard systems: we project your hardware with different CAD systems and compile user application software for SPS and control systems according to your specifications » We use monitored measurement- and testing technology, processes, and tools and can therefore guarantee consistently high quality » We monitor and calibrate all products in our own, certified calibrating station » Our products are CE-, conformity-, and manufacturer certified » We are certified manufacturers of switchboard systems (UL and cUL certificates) according to North American regulations Project-planning tools > Elcad > CAE33 > Proplan > Eplan

  • - Bending / folding
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Inert gas shielded arc welding (TIG)
  • - Laser cutting 2D
  • - Laser cutting, tube & section
  • - Power-coating
  • - Punching / nibbling
  • - Screen printing
  • - Shearing (rectangular blank/strip)
  • - Spot welding
  • - Stud welding

Schüttler Technik GmbH stands for a systematic and careful thought through production strategy and sheet metal processing can be seen from a totally different kind of view. We constantly optimize, think over or increase the production processes. What can be done to increase speed, to simplify the process or to work more accurate and more efficient?

  • - Bending / folding
  • - Drilling / threading / tapping
  • - Form milling (3 D)
  • - Laser cutting 2D
  • - Laser cutting 3D
  • - Laser cutting, tube & section
  • - Pipe bending
  • - Polygonal / non-circular turning
  • - Punching / nibbling
  • - Surface milling (2 1/2 D)
  • - Turning
  • - Bending / folding
  • - Cable preparation
  • - Combined forming laser cutting / punching
  • - Drilling / threading / tapping
  • - Form milling (3 D)
  • - HSC milling
  • - Laser cutting 2D
  • - Machining of extruded sections
  • - Mechanical assembly
  • - Power-coating
  • - Punching / nibbling
  • - Spray-painting
  • - Surface milling (2 1/2 D)
  • - Automatic turning (bar)
  • - Bending / folding
  • - Combined machining turning / drilling / milling
  • - Drilling / threading / tapping
  • - Form milling (3 D)
  • - HSC milling
  • - Laser cutting 2D
  • - Punching / nibbling
  • - Surface milling (2 1/2 D)
  • - Turning
  • - Bending / folding
  • - Cable preparation
  • - Combined forming laser cutting / punching
  • - Drilling / threading / tapping
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Laser cutting 2D
  • - Laser cutting, tube & section
  • - Manual electrode welding
  • - Oxyacetylene cutting
  • - Punching / nibbling
  • - Punching / pressing (Out-of-tool)
  • - Robot welding
  • - Sawing
  • - Shearing (rectangular blank/strip)
  • - Slotting
  • - Surface milling (2 1/2 D)
  • - Surfacing / build-up welding
  • - Turning
  • - Combined forming laser cutting / punching
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Inert gas shielded arc welding (TIG)
  • - Laser cutting 2D
  • - Laser cutting 3D
  • - Laser cutting, tube & section
  • - Laser-beam welding
  • - Mechanical assembly
  • - Power-coating
  • - Punching / nibbling
  • - Bending / folding
  • - Combined forming laser cutting / punching
  • - Inert gas shielded arc welding (MIG/MAG)
  • - Laser cutting 2D
  • - Plate rolling / bending
  • - Power-coating
  • - Punching / nibbling
  • - Shearing (rectangular blank/strip)
  • - Stud welding
  • - Surface grinding machine

Other sites of interest