Watch

    Techpilot Premium Member
    PMT GmbH
    Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials. We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more! We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2005
    Certifications
    ISO 9001:2008
    We provide machining services of unit parts, prototypes and short-run production. Problem-solving and provision of suitable machining solutions are what we do best. Our customers trust us because we are flexible with their enquiries and requirements, we deliver on-time and offer short- delivery times. This is what makes us stand out from the rest. The precision parts that we produced are known for its top quality, due to the raw materials used. Our experienced and passionate personnel carry a high sense of responsibility towards our customers and their product. We continue our expansion and growth, especially in technological developments. Our precision components are manufactured according to customer drawings, specifications and international standards. Design and production by reverse engineering method is also provided as a service. And finally, we offer competitive pricing, guaranteed!
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1986
    Certifications
    ISO 9001:2015
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    2010
    Certifications
    ISO 9001:2008
    For over 60 years we have manufactured plastic parts. As a partner, the precisely fulfill your requirements according to your 3D data, samples or drawings. We manufacture with modern machinery plastic injection tools, technical plastic parts and components and multi-component were for certified to the quality management system ISO 9001-2008. We process the injection molding process not only all common thermoplastics such as engineering plastics, but also high-temperature and bulk plastics to 40 computer-controlled, process-controlled injection molding machines up to a weight of approximately 1400 g. We offer you / our core competencies are: - injection molding - Mould - Assembly - Assembly - Labeling / marking - Pad printing (4 colors) - Plate Welding - Ultrasonic welding - Laser welding - Welding - Parts processing - Parts machining: grinding, wire cutting, EDM, CNC turning, milling Translation by Google Translate
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1952
    Certifications
    ISO 9001:2015
    Mould CAD / CAM Measurement Engraving Wage arrangements in the area milling, EDM and fairs.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1907
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    QDP B.V.
    From our own (100% WFOE) production plant in China, we provide in-house manufacturing of injection molds and injection molded products. This is the only way how we can secure the quality and protect your Intellectual Property, so you can rest assured that your product is in safe hands. QDP has more than 20 years experience in injection molding and product development.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2007
    Certifications
    ISO 9001:2015
    Our core competencies are: Tools - Hard Metal Processing - Sheet metal rounds - Punching / pressing (tool Falling) - Punching-bending (Bihler machine) - Stamping - Injection molding, extruding - injection molding - Encapsulation of inserts - To water - Die-casting - Ingot - Machine molding (sand casting) Translation by Google Translate
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2003
    Certifications
    ISO 9001:2008
    We are a leading manufacturer of state-of-the-art, top-notch vacuum components, either large series and/or tailor-made batches ! We are committed to matching our precious customers material handling requirements with the best solutions on unrivalled terms and conditions. We are looking forward to a successful collaboration with you. Please feel free to contact us -24/7-, I will be utmost delighted to submit you an unbeatable offer. Thanks in advance for having us. Diamantino S. ISIKCEVAHIR (MSiE) (Global Business Development Manager)
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1993
    Certifications
    ISO 9001:2015
    With our experience in various casting techniques and finishing processes of various casting, we have been active in the market for more than 40 years. We support and relieve our customers and offer the possibility to deliver a complete product, from processing to after-treatment. Our mission We focus on designing, manufacturing and delivering a total package of products. You can call on us for small and large work, but you can also use a certain processing or finishing process for your products. We are happy to be your adviser and partner for all your castings, whether it is a single piece of product or a larger series of products. We cast, melt, rotate milling, assemble and construct your product exactly as you wish. We place high demands on our quality. With us, a product does not leave the warehouse until it meets all the requirements regarding the mechanical properties and conditions. That way you can be sure that you will receive the highest quality at a competitive price.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2018
    Certifications
    ISO 9001:2015
    HEAVY - It's EASY for us! Pro-Moulding has over 30 years of experience in the field of plastic injection molding and has been characterized by precision, quality awareness and speed from the very beginning. Our high quality infrastructure guarantees a full service from mold and product development to serial production and numerous services. Through the motto "hard comes easy to us " the company has developed as a relevant partner mainly in Austria, Germany and Hungary. With an ultra-modern machine park in the high tonnage range, even the largest components can be easily implemented. We supply well-known equipment and component manufacturers in the outdoor, industrial, office furniture, medical technology and automotive sectors. Pro-Moulding employs about 100 people and is a company with a very solid financial background. With our modern machinery we are specialized in the production of large volume plastic parts. Our employees and the consistent implementation of the motto 'hard comes easy to us' are the success components for high customer satisfaction and growth. We process common engineering plastics such as ABS, POM, PA6.6, PPS, PBT, PP, PMMA and many other materials on 10 modern robot-controlled ENGEL machines with clamping forces from 88 kN to 2300 kN and shot weights bigger than 10.000 g. Our unrestricted goal as a company (team) is to be an A-supplier for each of our customers and thus a partner. To meet this claim, the continuous improvement of our processes (CIP) as well as the regular auditing of our quality management according to DIN EN ISO 9001:2015 is a matter of course for us. Our quality claim starts with the preparation, is accompanied by regular and random checks, internal and external audits and is ultimately supported by the high motivation of our employees. Certified according to EN ISO 9001:2015 and EN ISO 14001:2015 A direct contact person, supported by digital processing and confidentiality agreements, is part of a successful cooperation.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1992
    Certifications
    ISO 9001:2015
    We are a small, medium-sized family business in the 2nd generation, which specializes in aluminum permanent mold casting. We also offer machining, surface and heat treatment of the cast parts. We have been supplying our customers both nationally and internationally with high quality and on-time delivery for over 50 years
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1967
    Certifications
    ISO 9001:2015
    We are a young, modern company in the CNC contract manufacturing sector. Our quality standards as well as our adherence to deadlines are the top priority of our company. This is the only way we can identify with every product and every service. That is why we have set up this homepage for you so that we can inform you even better about our services. The service-oriented customer care is an essential cornerstone of our successful corporate strategy. Fulfilling your wishes is our focus. Qualified employees provide friendly and expert advice. Our extensive range of services leaves nothing to be desired. Convince yourself of our range of services and our diverse range of services in the field of CNC contract manufacturing. Our products are characterized by the highest quality and the most modern manufacturing technology. Of course we offer you all this at a fair price. Every employee has special knowledge and many years of professional experience in the field of CNC contract manufacturing. These are reflected in our products. You as a customer benefit from this, now and in the future!
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2012
    Certifications
    Jakob Plastic Processing Co. Ltd. Manufacturer of technical injection molding parts Our passion are thermoplastic resins. Our strength the processing of high-performance plastics, especially LCP - "Zenite® 6330" Our machinery includes injection units of the brand Arburg S and U with 15 to 250 tons clamping and swivel locking and injection units. Thus, we are optimally equipped for all needs and include for each task on the right machine.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1997
    Certifications
    ISO 9001:2008
    When working in higher levels we are RELIABLE yours. Tiger Lift is a subsidiary of the company Paksan in Turkey. Our parent company is 32 years active in the Turkish market for metal processing and is represented in more than 50 countries. Tiger Lift is a further development of the Turkish mother and is active in both down- and upstream active activities for metalworking and for crane and lift design. We offer extensive services around the material to metal as well as in the processing of. We also use our expertise in materials processing as well as in mechanical and automotive engineering to our customers reduce anew with tailored solutions always ahead. We are of the opinion that German craftsmanship is combined bring additional value with our international experience to our customers. We do not only follow the latest developments in our fields, we also develop self-innovation. Especially in mechanical and automotive engineering company Paksan has its research and development work massive boost to lay already the breeding ground for the work of tomorrow. Also in the metalworking sector, we are constantly keen to improve and expand our expertise. We are in constant contact with renowned research institutes in Turkey. This high demand is supported by the large number of certificates that have gotten our products. We strive every day with our successful staff who is always trying to improve and our products, yet offer you better services. When working in higher levels we are RELIABLE yours.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2013
    Certifications
    EN 15085
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2001
    Certifications
    DIN EN 1090
    Innovative plastic products since 1989 The BÖHL-plastic GmbH & Co. KG specializes in the production certified technical precision injection molded thermoplastics. We cooperate with raw material manufacturers, but also with colleges and universities. Because the plastic processing is a challenging topic. Individual solutions are our strength. Our activities span the injection molding production for the lighting and automotive supplier industry. We are also working for the industries fittings, electrical and electronics, medical, furniture, steel and textiles. The headquarters of our plastic processing company located in southern Westphalia. Here we present for you since 1989 plastic parts from all common thermoplastics ago. We are supported by our own mold.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1989
    Certifications
    ISO 9001:2015
    After many years of experience in drive technology and gear construction, Net-Components GmbH was founded in 2003 by Dipl.-Ing. Tarkan Peker. It is a DIN EN ISO 9001:2008 certified company. With our knowledge of the international market and with the goal-oriented way of working, we always strive for market-driven and customer-oriented solutions. The execution of complex tasks in series production, medium and small series production, as well as prototyping is carried out on modern machining centers, which guarantee a consistently high quality and flexibly realize customer requirements. We are able to make short-term as well as long-term investments depending on the order situation and thus secure the production with regard to quality, deadlines and prices. One of the company's principles is to manufacture our products economically using safe and environmentally friendly processes and to meet high quality standards. Our striving for constant improvement and cost-effective production leads to the competitiveness of our customers. We offer: - Turned parts - Milled parts - Forged parts - Complete assemblies Small or large series
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2003
    Certifications
    ISO 9001:2015
    3D laser accompanies your ideas from prototypes to series if. In the design or production Project Management / Consulting - Consulting for the optimal manufacturing process of your components if sand casting, investment casting, metal laser melting, 3D plastic printing or from the full milling - Feasibility study for the respective process - Procurement of plastic parts in PA2200, PA3200GF, Alumide, DuraForm ® Flex - Procurement of castings (sand casting, investment casting) Construction - Component development of plastic, sand or die casting components - Prototype tools, special machine, fixture, equipment - FEM calculations - Deriving electrodes - Interpretation of contour-hugging cooling for mold - Optimize the components on the metal laser melting process Metall-Laserschmelzen/LaserCUSING ® / SLM - Production of functional prototypes - Production of mold inserts with conformal cooling
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2011
    Certifications
    ISO 9001:2015
    Company HAPLAST d.o.o was established on March 12th 2015 as a continuation of a family business. It specializes in production and sales of products made from plastic. The company offers a service starting from the conceptual idea to the production of an end product available to one-time customers or mass production of million item series. We produce integral parts and components for the production of automotive batterys and industrial batteries, plastic casings for small kitchen appliances, parts for builders’ plastic joinery and other plastic components. Our machine park consists of 14 injection molding machines with a clamping force between 15 to 450 tons. We also offer ultrasonic welding of plastic. In cooperation with a contractual partner, we offer product development, making of 3D prototype and tool development. We are aware of the significance of partnership with the customers, where the response time is very important. In accordance with our business philosophy, we have put the wishes and expectations of the customers in the center of our business performance. By doing so we have gained trust and managed to create a good reputation, which has contributed to our business success so far. Our company emphasizes and prioritizes customer satisfaction, which is the reason why we continue to look for ways how to meet the highest expectations of even the most demanding customers. The results of active sales participation reflect expected results in the development. Production and sales segment of the company is roughly divided into the following areas: • Injection of plastic materials • Assembly of compounds • Prototype production • Ultrasonic welding Company references Our company takes pride in quality products which are the result of our own knowledge in development and are aimed at satisfying the needs of our customers at the highest level possible. HAPLAST d.o.o’s main references are: • Development-based cooperation with the internationally renowned company TAB. d.d with established long-term business relationship. • Cooperation with other clients, such as LWTechnik gmbh, Tehnoplast Povše d.o.o. etc. In 2019 the company has acquired a certificate of quality ISO 9001:2015 for injection of plastic materials and has therefore opened its door to more demanding clients. Company's vision The vision of our company is to become an established manufacturer and vendor of more intricate and demanding products made from plastic in Slovenia, as well as outside its borders, such as Austria and Germany. In the long run, we intend to export at least 50 % of all manufactured products. We are strategically positioned among smaller manufacturers of plastic products with our own knowledge in development and sales of middle and high-quality assortment of products. We see our mission in a continuous process of development and following the trends in the field of plastic masses. We want to create not only higher added value on the company level but also achieve higher use value for our customers. We would like to place products on the market that will meet the expectations of our clients or even try to exceed them, and by doing so guarantee a long-term strategic position in the market.
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2015
    Certifications
    ISO 9001:2015
    Aria was founded on a simple principle of providing the customers with one-stop solution of design, development and production for both plastic and metal components and its support tooling. And we are set to compete in anything the industry has to offer in terms of quality, price and services. Aria’s high-tech manufacturing and production facilities include CNC Turning, Milling, Injection Molding, Die casting, Stamping as well as a range of finishing techniques. We welcome your queries!
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    2010
    Certifications
    IATF 16949:2016
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1947
    Certifications
    ISO 9001:2015
    PEOPLE WITH EXPERTISE AND EXPERIENCE As a customer, you benefit from our generation-spanning experience and high quality awareness our specialists, which they continuously pass on in the company and in training. When it comes to tightest tolerances, complex geometries and demanding surfaces, REINER is your contact partner. ZINC DIE-CASTING With zinc, extremely filigree or thin-walled, technically high-quality parts can be cast and a very high degree of accuracy is achieved. In addition, zinc die-casting guarantees high productivity even with small quantities and, thanks to its durability, is a very interesting economic process. At our location in Furtwangen, zinc die-cast parts with a part weight of up to 700 grams cast in die casting machines with a clamping force of 5 to 125 tons. With a maximum clamping area of 400 x 600 millimetres, we cast the alloy Z410. MIM - Metal Injection Moulding In series production, MIM opens up completely new technical possibilities - right up to highly complex geometries and always with optimised cost-effectiveness. Cross holes, internal and external threads, gear teeth and surface structures are easily integrated into the component by MIM. The process combines the freedom of plastic injection moulding with the properties of metals. At REINER, a selection of low-alloy and stainless steels is used here. PRECISION CUTTING with forming technology In the field of precision stamping and forming technology REINER offers a range of processes and technologies for high-precision stamped and bent parts. Fine punching, hydraulic bending processes, NC punching or NC bending are as much a part of this as laser cutting. ASSEMBLY SERVICES Thanks to our expertise and range of services as a specialist component manufacturer, we can also process complete assemblies, partially assembled assemblies, components, system assemblies and assembled individual components for you. A unique selling point of REINER in component assembly is the vertical range of manufacture, which starts with the sketch plan if required. In the in-house development center, engineers are available at CAD stations to work out plans and transfer them seamlessly into the production of the components. TOOLBUILDING We are your partner for mould making, precision stamping tools and devices. The equipment: - CAD / CAM for design and production - sink and wire eroding - Surface, profile and jig grinding - Most modern CNC programming technology - HSC milling - Coordinate measuring technology for form and pattern measurement - Centres for machining - Services from the design to the finished component. In addition to the design and manufacture of tools and devices, we carry out maintenance and repairs ourselves.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1913
    Certifications
    ISO 9001:2015
    The GW St. Pölten is a modern industrial enterprise blank. The focus of the company with around 440 employees ranging from industrial parts manufacturing to production of components and complete systems. Advice during the development and construction phase completes the offer. Thanks to the greatest possible flexibility, the company is fixed and competent partner for many customers at home and abroad. Long ago, the GW St. Pölten has made as a modern problem solver a name. The different production areas such as metal working and processing, electrical installation, signage, etc. are equipped with advanced production facilities and therefore allow a high degree of vertical. The high standard of management, production and the products and services is impressively confirmed by a number of certifications in the fields of quality, environmental management, occupational safety and product quality. The ÖNORM EN ISO 9001:2008 certificate and the Austria Quality Seal are the best evidence. OUR PRODUCTS AND SERVICES Metalworking and PROCESSING Machining and Forming Technology with advanced CNC machines, assembly of complete assemblies, components manufacturing including surface treatment, serial production, sheet metal fabrication, welding and much more. ELECTRICAL ASSEMBLY / CABINET Partial and final assembly of electrical components, control systems, and manufacturing of complete enclosures and cable assemblies for mechanical and soldering work. Unlisted panel builder in accordance with UL 508A Manufacturer processed wire and wiring harnesses. SIGNS PRODUCTION, milling, engraving, POWDER COATING Signs in single or serial production to production of building control systems, including on-site installation. GENERAL ASSEMBLY Installations of all kinds, execution of various packaging, Kuvertierungs, sorting works and recycling activities. TEXTILE WORKS Curtain assembly and sewing of all kinds with the exception of clothing confection. Plastic injection molding / ZINC DIE-FOUNDRY Injection molded plastic parts to glass fiber reinforced plastics. Production of zinc die castings and surface finishing including finishing and assembly.
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    1981
    Certifications
    ISO 9001:2015
    Injection We squirt for you all on behalf of small batches to larger blanket orders. Moldings with insert (eg metal) are possible. Upon request, we also take over the complete material management for your production order, and store the injection molding tools for you. You only call from, we do the rest for you. Mould With a choice of partner companies in Germany, Europe and Asia, we are able to create you an offer for your individual molding tool you define the number of cycles, number of cavities, as 1k / 2k tool etc. mounting service If you already have a fully developed product and are still looking for a suitable partner for the assembly of sub-groups or complex assemblies, we are pleased to offer our services. Our strength lies in a very precise mounting. Here we are particularly specialized in the soldering and bonding, accurate mounting crafted and reliable final inspection.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2013
    Certifications
    ISO 9001:2015
    We are a company with over 20 years of experience in the supply of custom mechanical components.(specialized in supplying custom mechanical components with over 20 years of experience.) We take care of your supply needs from the moment we receive your request for quotation until the shipment from our warehouse. Once your request for an offer has been received, we take care of: 1) Identify the most suitable technology to reduce costs and create complex parts 2) Dialogue with suitable and economically competitive suppliers 3) Let us introduce you to our best offer Once your purchase order has been received, we take care of: 4) Follow the sampling and certification phase of the product 5) Manage production advances in accordance with the required timelines When the goods arrive at our warehouse, we will take care of: 6) Perform a statistical check in acceptance 7) Pack and ship the goods according to your needs 8) Manage reorder quantities from a Kanban perspective We can provide finished items that require multiple processes such as: > Heat treatments > Surface treatments > Additional processing (e.g.: assembly, shooting, rectification, etc.) We are able to offer this service thanks to our mechanical and procurement skills, to our structure in northeastern Italy and to a network of production partners present in Italy and Asia. We are fluent in Italian, German and English. Contact us to learn about our team, our technologies and our prices.
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2004
    Certifications
    ISO 9001:2008
    Maso attend to direct contacts with the foundries and gives the customer to pick up the possiblity, his requirements for all steel castings as well as Grey cast- and Spheroidal graphite cast iron, Aluminium and its alloys castings directly with it with the supplier in Turkey and China. Unknown intercession offices slip it. As production processes to the disposal are Sand casting -machine moulding, investment casting, die-casting for low, middle and big deries, roughly and ready processes. Maso takes over the first sample care until the series maturity. The customer can order directly after it. The same profile offers Maso for drop forged parts, sheet metal stamping parts and vehicle rims.
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    1995
    Certifications
    ISO 9001:2008
    Welcome to SOARPLASTICOS, Lda.! With a team of around 40 skilled professionals, we specialize in thermoplastic injection services, providing our valued customers with top-notch 1K and 2K injection solutions. Additionally, we offer assembly services for components, tapes, and more. Certified under ISO 9001:2015, our company is committed to delivering services of unparalleled quality while keeping competitive pricing in mind. To achieve this, we boast a modern fleet of machines, featuring units with clamping forces ranging from 40 to 900 tons. Among these, we proudly include two-component injection and gas-aided injection systems. To streamline operations and reduce costs, a significant number of machines are equipped with robots, enabling shorter shot cycles and minimizing part handling. At SOARPLASTICOS, we approach projects with dedication from their early stages. We are more than willing to collaborate with clients during product development, offering valuable insights to achieve the most suitable geometries for stable and efficient processes. In essence, we strive to find the best-fitted solution for each client. Our expertise lies in producing plastic components, often incorporating metallic inserts. To ensure comprehensive service, we partner with specialized external vendors for finishings such as painting, cataphoresis, or chroming. Moreover, we excel in complete system assembly, meticulously adhering to supply plans, many of which are conveniently received through EDI. Over time, we have heavily invested in bi-component technology. Today, we boast Engel machines with clamping forces ranging from 400 tons to 600 tons, designed to accommodate tools with inner kinematics, robot transfer, and more. -- Exciting News! Our commitment to environmental responsibility and the global energy challenges we face has motivated us to venture into self-production. Presently, a considerable portion of our energy requirements is met by our very own photovoltaic park. With favorable conditions, we envision fulfilling our entire energy consumption through self-production. Thank you for visiting us at SOARPLASTICOS. We are proud of our journey so far and look forward to continuing our mission of delivering exceptional services while embracing sustainable practices. Should you have any inquiries or projects in mind, please don't hesitate to get in touch. Together, let's soar to new heights of excellence!
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2000
    Certifications
    ISO 9001:2015
    HELLO WE ARE A COMPANY THAT HAS SET OUT TO SERVE OUR CUSTOMERS AROUND THE WORLD WITH OUR 15 YEARS OF EXPERIENCE IN OUR BUSINESS LIFE AND TRIES TO COMBINE THIS SERVICE WITH THE HIGHEST LEVEL OF QUALITY, TIMELY DELIVERY AND REASONABLE PRICE POLICY. OUR GOAL IS ALWAYS TO REACH BETTER QUALITY
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2023
    Certifications
    The SITEK AG is a dynamic and reliable companies in the industry. It produces high-quality plastic parts and associated tools for a demanding clientele. We want to contribute to the long term success of our clients and work in partnership and permanently with you. Our mature parent-form concept enables you to relate complex plastic parts for small and medium series at affordable conditions, yet in Swiss quality. Together with you, the customer, and also with our suppliers as partners we are able to offer far more than just a plastic part in the situation. We see ourselves as a provider of total solutions from concept to the finished packaged assembly. Bützer assumes responsibility for protecting the environment and the health and safety of our employees by appropriate action. We ensure the development and independence of our family business fair profits which are reinvested at a substantial part of the company's progress. Part Sprektrum: - Housing, Housing - Cover, cover - Transmission cover - Pump housing - Display window - Cover, aperture - Gears, gear - Box, container - Hinge Range of machines: - Krauss Maffei - Arburg - Ergotech - Negri Bossi - Fehlmann - Agie - Charmilles Technologies: - Injection molding, injection molding, plastic injection molding - Ultrasonic Welding, Ultrasonic - Hand assembly, installation, assembly, screwing, plugging, clips, Klippsen - Insertion, insertion form - Bonding, potting, bonding - Coating, painting, electroplating - Mold design, mold - Die-sinking EDM, sinker EDM, wire cutting, wire EDM, Wire EDM Range of materials: - PEEK, Victrex - PA, Ultramid - PE - PP - PBT, Ultradur - POM, Delrin, Hostaform - PET - PSU - PPS, Fortron, Ryton - PPO - ABS, Cycolac - PC - PMMA - LCP, Vectra - PEI, Ultem - P
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1997
    Certifications
    ISO 9001:2015
    You would like to make metallic components additive? Are you interested in the possibilities of this technology? With the additive manufacturing of 3D-printing metal (SLM, Laser-cusing®, DMLS etc.) we offer you a production technology that is no longer used only in prototype production. This process offers completely new possibilities where conventional processes such as laser cutting, turning or milling reach their limits. This is a process that is used exclusively for the production of metal. As with 3D printing, the components are built up by layer-by-layer build-up and fusion of metal powder; the component has almost identical mechanical properties to the original material. You need support in implementing your automation project? Then you are exactly right with us! We realize complete manufacturing cells according to your idea. From the feasibility study on the construction and assembly to commissioning and on-site support, we are the right partner for your project. In particular, we cover the following areas of responsibility: - Project Management - Programming - 3D printing metal (additive manufacturing) - Security management - 3D scanning - Milling technology - Construction - Assembly - Hose packages - Service - Training Our 3D metal printing services at a glance: - construction work (cooling ducts, component optimization, etc.) - Checking the cooling channel design (flow simulation, thermal images, flow analyzes) - coatings - Plastic prototypes - Component measurement - Creation of plastic models - 3D scanning / reverse engineering - fine machining (milling, grinding, eroding etc.) - Surface treatment (anodizing, electropolishing, etc.) - hardening - welding
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    Certifications
mehr anzeigen