Ing. Kurt Schade GmbH & Co. KG Wildeshausen
Contact & company data

Contact names

Dirk Schade

  • Geschäftsführer

  • Phone: Show phone number 04431/7480-111
  • Fax: Show fax number 04431/7480-148
  • E-Mail: contact now

Peer Klein

xingIcon
  • Vertrieb / Kalkulation

  • Phone: Show phone number 04431/7480-118
  • Fax: Show fax number 04431/7480-148
  • E-Mail: contact now

Daniel Boehlke

xingIcon

Michael Meyer

xingIcon
  • Vertrieb / Kalkulation

  • Phone: Show phone number 04431/7480-114
  • Fax: Show fax number 04431/7480-148
  • E-Mail: contact now

Patrick Arkenau

xingIcon
  • Fertigungsleiter / Vertrieb

  • Phone: Show phone number 04431/7480-153
  • Fax: Show fax number 04431/7480-148
  • E-Mail: contact now

Technologies

Machining - Milling

Technology Lotsize Length Width Height Diameter Weight Material Strength

Deep-hole drilling

1 - 100 100 mm -
8200 mm
300 mm -
3000 mm
25 mm -
3000 mm
10 mm -
200 mm
max. 25000 kg -

Full-range milling (including turning)

1 - 100 250 mm -
1650 mm
250 mm -
1650 mm
25 mm -
1250 mm
100 mm -
1650 mm
- -

HSC milling

1 - 100 100 mm -
8200 mm
500 mm -
3000 mm
25 mm -
3000 mm
-
max. 25000 kg -

Milling

1 - 100 100 mm -
8200 mm
500 mm -
3000 mm
25 mm -
3000 mm
-
- -

5-axis milling machines

1 - 100 100 mm -
8200 mm
500 mm -
3000 mm
25 mm -
3000 mm
-
- -

Machining - Turning

Technology Lotsize Length Width Height Diameter Weight Material Strength

Full-range turning (including milling)

1 - 100 100 mm -
2500 mm
-
-
100 mm -
1800 mm
- -

Hard turning

1 - 100 25 mm -
2500 mm
-
-
300 mm -
1800 mm
- -

Shaft machining

1 - 100 25 mm -
2500 mm
-
-
300 mm -
1800 mm
max. 8000 kg -

Turning

1 - 100 25 mm -
2500 mm
-
-
300 mm -
1800 mm
- -

Machining - Drilling / Sawing

Technology Lotsize Length Width Height Diameter Weight Material Strength

Drilling / threading / tapping

1 - 100 10 mm -
8200 mm
10 mm -
3000 mm
25 mm -
300 mm
-
max. 25000 kg -

Sawing

1 - 100 5 mm -
6000 mm
5 mm -
620 mm
5 mm -
620 mm
5 mm -
620 mm
- -

Sheet metal processing - Sheet Metal Processing

Technology Lotsize Length Width Height Diameter Weight Material Strength

Oxyacetylene cutting

1 - 100 10 mm -
8000 mm
10 mm -
3000 mm
-
-
max. 1000 kg 1 mm -
30 mm

Structural Steelwork & Welding - Welded constructions / Structural Steelwork

Technology Lotsize Length Width Height Diameter Weight Material Strength

Machine frames / bases / racks

- 100 mm -
10000 mm
100 mm -
3000 mm
20 mm -
3000 mm
-
max. 20000 kg -

Welded constructions (weldments)

- 100 mm -
10000 mm
100 mm -
3000 mm
20 mm -
3000 mm
-
max. 20000 kg -

Structural Steelwork & Welding - Welding

Technology Lotsize Length Width Height Diameter Weight Material Strength

Inert gas shielded arc welding (MIG/MAG)

1 - 100 100 mm -
10000 mm
100 mm -
3000 mm
20 mm -
3000 mm
-
max. 20000 kg -

Inert gas shielded arc welding (TIG)

1 - 100 100 mm -
10000 mm
100 mm -
3000 mm
20 mm -
3000 mm
-
max. 20000 kg -

Tool making - Jigmaking

Technology Lotsize Length Width Height Diameter Weight Material Strength

Assembly jigs

- 500 mm -
6000 mm
500 mm -
2500 mm
100 mm -
2000 mm
-
max. 10000 kg -

Mechanical Engineering & Assembly - Assembly

Technology Lotsize Length Width Height Diameter Weight Material Strength

Electromechanical assembly

- -
-
-
-
max. 20000 kg -

Industrial / On-site-assembly

- -
-
-
-
max. 20000 kg -

Mechanical assembly

- -
-
-
-
max. 20000 kg -

Mechanical Engineering & Assembly - Measuring & Testing

Technology Lotsize Length Width Height Diameter Weight Material Strength

Measuring / testing

- 10 mm -
2500 mm
10 mm -
2500 mm
10 mm -
2500 mm
10 mm -
2000 mm
max. 10000 kg -

Mechanical Engineering & Assembly - Mechanical Engineering

Technology Lotsize Length Width Height Diameter Weight Material Strength

Apparatus engineering

1 - 100 10 mm -
8200 mm
10 mm -
3000 mm
10 mm -
3000 mm
-
max. 20000 kg -

Handling technology

1 - 100 10 mm -
8200 mm
10 mm -
3000 mm
10 mm -
3000 mm
-
max. 20000 kg -

Hydraulic engineering

1 - 100 10 mm -
8200 mm
10 mm -
3000 mm
10 mm -
3000 mm
-
max. 20000 kg -

Mechanical engineering

1 - 100 10 mm -
8200 mm
10 mm -
3000 mm
10 mm -
3000 mm
-
max. 20000 kg -

Pneumatic engineering

1 - 100 10 mm -
8200 mm
10 mm -
3000 mm
10 mm -
3000 mm
-
max. 20000 kg -

Tool building

1 - 100 10 mm -
8200 mm
10 mm -
3000 mm
10 mm -
3000 mm
-
max. 20000 kg -

Surface treatment - Heat Treatment

Technology Lotsize Length Width Height Diameter Weight Material Strength

Annealing

1 - 100 10 mm -
8200 mm
10 mm -
3000 mm
10 mm -
3000 mm
10 mm -
2000 mm
max. 20000 kg -

Case hardening/surface hardening

1 - 100 10 mm -
8200 mm
10 mm -
3000 mm
10 mm -
3000 mm
10 mm -
2000 mm
max. 20000 kg -

Hardening

1 - 100 10 mm -
8200 mm
10 mm -
3000 mm
10 mm -
3000 mm
10 mm -
2000 mm
max. 20000 kg -

Hardening and tempering

1 - 100 10 mm -
8200 mm
10 mm -
3000 mm
10 mm -
3000 mm
10 mm -
2000 mm
max. 20000 kg -

Surface treatment - Surface Treatment

Technology Lotsize Length Width Height Diameter Weight Material Strength

Blacking

1 - 100 10 mm -
2000 mm
10 mm -
500 mm
10 mm -
500 mm
-
max. 1000 kg -

Galvanizing

1 - 100 10 mm -
8200 mm
10 mm -
1000 mm
10 mm -
2000 mm
1 mm -
1000 mm
max. 8000 kg 1 mm -
20 mm

Parts cleaning/degreasing

- 10 mm -
8200 mm
10 mm -
3000 mm
10 mm -
3000 mm
-
max. 20000 kg -

Powder coating

1 - 100 10 mm -
8200 mm
10 mm -
3000 mm
10 mm -
3000 mm
-
max. 20000 kg -
further Technologies

Company description

Quality prevails

With this knowledge, we have been manufacturing high-precision mechanical engineering elements for customers in a wide variety of industries - individual components, assemblies and special machines, with which we have earned an excellent reputation both locally and globally.


The best for everyone

We would also be happy to convince you with our services. Flexible, dialog-oriented and on schedule, we weld, drill, mill and turn even the largest and heaviest parts according to individual specifications. No matter whether individually or in series, whether for small customers or corporations. Thanks to modern CNC machinery, a central tool management system, welding equipment up to 25 tons, well-trained and trained specialists and TÜV-certified quality management, we can fulfill almost every wish.


Precision "Made in Germany"

Our production is divided into two areas. In steel construction, a wide variety of metal structures are created under the hands of experienced locksmiths and welders.We complete them in machining: Here, competent machining technicians mill, drill and turn, e.g. bearing seats for gearboxes or complete underwater housings for propellers - always in the highest precision class. We do all the work ourselves (if desired, right up to the completion of entire assemblies); outsourcing is out of the question for us: the risk of quality fluctuations would be too great.


We do what you need

Your drawings and plans are decisive for us. But you can be sure that every step is carried out with the critical expertise of a mechanical engineer. Our strength is to think about the later use of the component during production so that it does its job perfectly. If you wish, we can start with this before production: Together with you, we will check your designs, make recommendations and also like to develop components yourself for the application you are planning.
Read more

RFQs

Anfrageübersicht Technologien RFQ Overview Technologies
Full-range tu... (2) Milling (1) Full-range mi... (1) Hard turning (1)
All RFQs:
Technologien und Anzahl der eingestellten Anfragen Technologies and number of posted RFQs

Machines

PowerSpeed 5 SHW 2008 Milling<br>Drilling / threading / tapping<br>HSC milling<br>5-axis milling machines<br>
PowerSpeed 5
Manufacturer: SHW
Control: Heidenhain iTNC 530
Year of Construction: 2008
Technologies:
Milling
Drilling / threading / tapping
HSC milling
5-axis milling machines
PCR 150plus  UNION 2009 Milling<br>Drilling / threading / tapping<br>HSC milling<br>5-axis milling machines<br>
PCR 150plus
Manufacturer: UNION
Control: Heidenhain iTNC 530
Year of Construction: 2009
Technologies:
Milling
Drilling / threading / tapping
HSC milling
5-axis milling machines
HVM 6000 P Lanza ANAYAK 2011 Milling<br>Drilling / threading / tapping<br>HSC milling<br>5-axis milling machines<br>
HVM 6000 P Lanza
Manufacturer: ANAYAK
Control: Heidenhain iTNC 530
Year of Construction: 2011
Technologies:
Milling
Drilling / threading / tapping
HSC milling
5-axis milling machines
VH Plus 3000  ANAYAK 2013 Milling<br>Drilling / threading / tapping<br>HSC milling<br>5-axis milling machines<br>
VH Plus 3000
Manufacturer: ANAYAK
Control: Heidenhain iTNC 530
Year of Construction: 2013
Technologies:
Milling
Drilling / threading / tapping
HSC milling
5-axis milling machines
BC 80 / 2500 HEDELIUS 2001 Milling<br>Drilling / threading / tapping<br>HSC milling<br>5-axis milling machines<br>
BC 80 / 2500
Manufacturer: HEDELIUS
Control: Heidenhain iTNC 426
Year of Construction: 2001
Technologies:
Milling
Drilling / threading / tapping
HSC milling
5-axis milling machines
Elgamill HE 5000 BUTLER 1990 Milling<br>Drilling / threading / tapping<br>HSC milling<br>5-axis milling machines<br>
Elgamill HE 5000
Manufacturer: BUTLER
Control: Heidenhain iTNC 530
Year of Construction: 1990
Technologies:
Milling
Drilling / threading / tapping
HSC milling
5-axis milling machines
Ecocut 2 SCHARMANN 1986 Milling<br>Drilling / threading / tapping<br>HSC milling<br>5-axis milling machines<br>
Ecocut 2
Manufacturer: SCHARMANN
Control: Heidenhain iTNC 530
Year of Construction: 1986
Technologies:
Milling
Drilling / threading / tapping
HSC milling
5-axis milling machines
Rapid II WOTAN 1992 Milling<br>Drilling / threading / tapping<br>HSC milling<br>5-axis milling machines<br>
Rapid II
Manufacturer: WOTAN
Control: Heidenhain iTNC 530
Year of Construction: 1992
Technologies:
Milling
Drilling / threading / tapping
HSC milling
5-axis milling machines
Rapid II WOTAN 1988 Milling<br>Drilling / threading / tapping<br>HSC milling<br>5-axis milling machines<br>
Rapid II
Manufacturer: WOTAN
Control: Heidenhain iTNC 530
Year of Construction: 1988
Technologies:
Milling
Drilling / threading / tapping
HSC milling
5-axis milling machines
Puma VTR1216 M DOOSAN 2019 Hard turning<br>Full-range turning (including milling)<br>Turning<br>
Puma VTR1216 M
Manufacturer: DOOSAN
Control: Fanuc 0iT-F
Year of Construction: 2019
Technologies:
Hard turning
Full-range turning (including milling)
Turning
CTE 160 DÖRRIES 1994 Hard turning<br>Turning<br>
CTE 160
Manufacturer: DÖRRIES
Control: Siemens CNC 840 D
Year of Construction: 1994
Technologies:
Hard turning
Turning

Materials

  • Steel

    • Structural steel
    • Case hardening/tempering steel
    • Stainless steel (rust-proof V2A)
    • Stainless steel (rust-proof V4A)
    • Free-cutting/mild steel
    • Tool steel
    • Spring steel
    • Cold extruding steel
  • Cast metals

    • Cast steel
    • Cast iron
  • Light metals

    • Aluminium and aluminium alloys
  • Heavy metals

    • Copper-zinc alloys (brass)
    • Copper and copper alloys
    • Zinc and zinc alloys
    • Solder
  • Plastics/synthetic materials

    • Thermoplastics
    • Thermosets
  • Advanced Materials

    • Nickel alloy (Inconel, Monel, Hastelloy)
    • Silicium
Read more

Industries

  • Fittings engineering
  • Automation and control engineering
  • Automotive and vehicle construction
  • Building, agricultural and forestry machinery manufacturing
  • Construction and architectural supplies
  • Mining and tunnel engineering
  • Chemical industry
  • Railway and rail vehicles industry
  • Electrical industry
  • Power generation and transmission industry
  • Packaging industry
  • Machine tool manufacturing
  • Apparatus engineering
  • Mechanical engineering
  • Plant engineering and construction
  • Drive and gear engineering
  • Special purpose machinery manufacturing
  • Precision engineering, mechatronics and optics
  • Hydraulic and pneumatic industry
  • Air conditioning, refrigeration and ventilation industry
  • Boiler, container and tank construction
  • Aerospace and aviation industry
  • Military engineering
  • Paper and printing machinery industry
  • Shipbuilding industry
Read more

References

Schwermaschinen- und Anlagenbau, Luft- und Raumfahrt, Automobil- und Zulieferer-Industrie, Berg-, Schiff-, Pressen- und Kompressorenbau, Windkraftindustrie
Read more