Goodwill Precision Machinery Ltd.
(German Office) Saarlouis

Contact & company data

Goodwill Precision Machinery Ltd. (German Office)

Gisinger Str. 20
66740 Saarlouis (Saarlouis)
Germany

Phone: Show phone number + 49 1726905392
Fax: Show fax number +86-769-22689375
Web: Website

Premium Member since: 2010
last seen online: this week

Company data:
Employees: 500 - 1000
Year of foundation: 2004
Turnover: 20 - 50 Mil.

Certifications:
IATF 16949:2016
ISO 9001:2015
EN ISO 13485
ISO 14001

Location:

further locations:
Headquarter：Guangdong in China, Office in：Germany , Australia , Japan und USA

Contact & company data

Contact names

Simon Shen

China
Phone: Show phone number +86-769-22689275 ext:805
Fax: Show fax number +86-769-22689375
E-Mail: contact now

Amanda LI

Phone: Show phone number 13712018696
E-Mail: contact now

Manfred Princi

Phone: Show phone number 0049 172 690 5392
Fax: Show fax number 0086-769-22689375
E-Mail: contact now

Allan Liu

Phone: Show phone number +86 769 22689275 -883
E-Mail: contact now

Sophia Zhou

Phone: Show phone number +86-769-22689275
E-Mail: contact now

Technologies

Machining - Milling

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Engraver milling	1 - 1000000	1 mm - 650 mm	1 mm - 350 mm	1 mm - 360 mm	1 mm - 500 mm	max. 200 kg	-
Form milling (3 D)	1 - 1000000	10 mm - 650 mm	10 mm - 350 mm	10 mm - 360 mm	-	-	-
Full-range milling (including turning)	1 - 100000	10 mm - 650 mm	10 mm - 350 mm	10 mm - 360 mm	10 mm - 300 mm	-	-
HSC milling	1 - 1000000	10 mm - 650 mm	10 mm - 350 mm	10 mm - 350 mm	-	max. 200 kg	-
Milling	1 - 1000000	1 mm - 650 mm	1 mm - 350 mm	1 mm - 360 mm	-	-	-
5-axis milling machines	1 - 1000000	1 mm - 1000 mm	1 mm - 1000 mm	1 mm - 1000 mm	-	-	-

Machining - Turning

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Automatic turning (bar)	10 - 1000000	0,5 mm - 1000 mm	-	-	0,5 mm - 800 mm	-	-
Broaching	1 - 1000000	5 mm - 500 mm	-	-	5 mm - 500 mm	-	-
Centering / end facing	1 - 10000000	1 mm - 1650 mm	-	-	1 mm - 850 mm	-	-
Deep-hole drilling	1 - 10000000	1 mm - 1200 mm	1 mm - 1000 mm	1 mm - 1000 mm	1 mm - 800 mm	max. 300 kg	-
Full-range turning (including milling)	1 - 1000000	1 mm - 1650 mm	-	-	1 mm - 800 mm	-	-
Hard turning	1 - 1000000	1 mm - 1000 mm	-	-	1 mm - 850 mm	-	-
Shaft machining	1 - 1000000	1 mm - 1000 mm	-	-	1 mm - 850 mm	max. 200 kg	-
Swiss turning	1 - 1000000	1 mm - 1000 mm	-	-	1 mm - 850 mm	-	-
Turning	1 - 1000000	0,5 mm - 1000 mm	-	-	0,5 mm - 850 mm	-	-

Sheet metal processing - Sheet Metal Forming (Stamping, Deep-drawing)

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Deep-drawing	10 - 1000000	-	-	-	-	-	-
Fineblanking / pressing	10 - 1000000	10 mm - 1000 mm	10 mm - 1000 mm	-	-	-	-
Plate rolling / bending	10 - 1000000	-	5 mm - 500 mm	-	-	-	10 mm - 500 mm
Punching / pressing (Out-of-tool)	10 - 1000000	10 mm - 1000 mm	10 mm - 1000 mm	-	-	-	-
Roll forming	10 - 1000000	10 mm - 1000 mm	10 mm - 1000 mm	-	-	-	10 mm - 1000 mm
Spinning	10 - 1000000	-	-	-	10 mm - 500 mm	-	10 mm - 1000 mm
Stamping and bending machine (Bihler)	10 - 1000000	10 mm - 1000 mm	10 mm - 1000 mm	-	-	-	10 mm - 1000 mm

Sheet metal processing - Sheet Metal Processing

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Bending / folding	1 - 100000	0,5 mm - 50 mm	-	-	-	-	0,5 mm - 50 mm
Combined forming laser cutting / punching	10 - 1000000	0,5 mm - 50 mm	0,5 mm - 50 mm	-	-	-	1 mm - 50 mm
Laser cutting, tube & section	10 - 1000000	10 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	-	10 mm - 1000 mm
Laser cutting 2D	10 - 1000000	0,1 mm - 1000 mm	0,1 mm - 500 mm	-	-	-	0,1 mm - 1000 mm
Oxyacetylene cutting	10 - 1000000	0,1 mm - 1000 mm	0,1 mm - 1000 mm	-	-	max. 200 kg	0,1 mm - 1000 mm
Plasma fusion cutting	10 - 1000000	0,1 mm - 1000 mm	0,1 mm - 1000 mm	-	-	max. 200 kg	0,1 mm - 1000 mm
Plate straightening	10 - 1000000	-	0,1 mm - 1000 mm	-	-	-	0,1 mm - 1000 mm
Punching / nibbling	10 - 1000000	0,1 mm - 1000 mm	0,1 mm - 1000 mm	-	-	-	0,1 mm - 1000 mm
Shearing (rectangular blank/strip)	10 - 1000000	-	-	-	-	-	1 mm - 1000 mm

Structural Steelwork & Welding - Welding

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Electron-beam welding	1 - 1000000	10 mm - 1500 mm	1 mm - 1000 mm	1 mm - 1000 mm	-	max. 500 kg	-
Flash-butt welding	1 - 1000000	-	-	-	-	-	-
Friction welding	1 - 1000000	10 mm - 1500 mm	-	-	-	-	-
Inert gas shielded arc welding (MIG/MAG)	1 - 1000000	10 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 300 kg	-
Inert gas shielded arc welding (Plasma)	1 - 1000000	10 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	5 mm - 300 mm	max. 300 kg	10 mm - 1000 mm
Inert gas shielded arc welding (TIG)	1 - 1000000	10 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 300 kg	-
Laser-beam welding	1 - 1000000	10 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	5 mm - 300 mm	max. 300 kg	-
Manual electrode welding	1 - 1000000	10 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	5 mm - 300 mm	max. 300 kg	10 mm - 1000 mm
Projection welding	1 - 1000000	-	-	-	-	-	10 mm - 1000 mm
Seam welding	1 - 1000000	-	-	-	-	-	10 mm - 1000 mm
Soldering	1 - 1000000	10 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	5 mm - 300 mm	max. 300 kg	-
Spot welding	1 - 1000000	-	-	-	-	-	10 mm - 1000 mm
Stud welding	1 - 1000000	-	-	-	-	-	-
Vaccum brazing	1 - 10000000	10 mm - 1000 mm	1 mm - 1000 mm	1 mm - 1000 mm	5 mm - 500 mm	max. 500 kg	-

Mechanical Engineering & Assembly - Assembly

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Electromechanical assembly	-	-	-	-	-	max. 800 kg	-
Industrial / On-site-assembly	-	-	-	-	-	max. 800 kg	-
Mechanical assembly	-	-	-	-	-	max. 1000 kg	-

Machining - Drilling / Sawing

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Drilling / threading / tapping	1 - 1000000	5 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 300 kg	-
Sawing	1 - 1000000	50 mm - 1000 mm	50 mm - 1000 mm	50 mm - 1000 mm	5 mm - 1000 mm	-	-
Ultrasonic drilling	1 - 1000000	1 mm - 1000 mm	1 mm - 300 mm	1 mm - 300 mm	-	max. 300 kg	-

Machining - Machining (Extruded Profiles)

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Machining of extruded sections	-	-	1 mm - 500 mm	1 mm - 500 mm	-	max. 100 kg	-

Structural Steelwork & Welding - Welded constructions / Structural Steelwork

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Machine frames / bases / racks	-	10 mm - 1000 mm	10 mm - 800 mm	10 mm - 800 mm	-	max. 500 kg	-
Welded constructions (weldments)	-	10 mm - 1000 mm	10 mm - 800 mm	10 mm - 800 mm	-	max. 500 kg	-

Plastics & Rubber - Forming (Plastics & Rubber)

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Thermoforming	100 - 1000000	1 mm - 500 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 100 kg	10 mm - 500 mm

Plastics & Rubber - Injection Moulding, Extruding

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Compression moulding	100 - 10000000	1 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 100 kg	-
Extrusion blow moulding	100 - 10000000	1 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	-	-
Extrusion (profile)	100 - 10000000	-	1 mm - 500 mm	1 mm - 500 mm	-	-	-
Foaming	100 - 1000000	5 mm - 1000 mm	5 mm - 500 mm	5 mm - 500 mm	-	-	-
Injection moulding	100 - 10000000	1 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 100 kg	-
Injection-mould around inserts	100 - 1000000	1 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 100 kg	-
Multi component injection moulding	100 - 10000000	1 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 100 kg	-
Rotational moulding	1000 - 10000000	1 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	-	-
Transfer moulding	1000 - 10000000	1 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 100 kg	-

Plastics & Rubber - Joining (Plastics & Rubber)

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Extrusion welding	100 - 1000000	-	-	-	-	max. 100 kg	-
Hot gas welding	100 - 1000000	-	-	-	-	max. 100 kg	-
Hot plate / Heated tool welding	100 - 1000000	-	-	-	-	max. 100 kg	-

Additive Manufacturing - Additive Manufacturing

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Additive Manufacturing (general)	100 - 1000000	1 mm - 500 mm	1 mm - 500 mm	1 mm - 500 mm	-	-	-
Electroforming	10 - 100000	1 mm - 500 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 100 kg	-
Fused deposition modelling (FDM)	10 - 1000000	1 mm - 500 mm	1 mm - 500 mm	1 mm - 500 mm	-	-	-
Laminated object manufacturing (LOM)	10 - 1000000	1 mm - 1000 mm	1 mm - 500 mm	0,5 mm - 100 mm	-	-	-
Metal laser sintering	100 - 1000000	1 mm - 500 mm	1 mm - 500 mm	1 mm - 500 mm	-	-	-
Multi-jet modelling (MJM)	500 - 1000000	1 mm - 500 mm	1 mm - 500 mm	1 mm - 500 mm	-	-	-
Selective Laser Melting (SLM)	-	1 mm - 100 mm	1 mm - 100 mm	1 mm - 100 mm	1 mm - 100 mm	max. 300 kg	1 mm - 100 mm
Selective laser sintering	10 - 1000000	1 mm - 1000 mm	1 mm - 1000 mm	1 mm - 1000 mm	-	-	-
Stereolithography (SLA)	10 - 1000000	10 mm - 500 mm	10 mm - 500 mm	10 mm - 500 mm	-	-	-
Vacuum casting	500 - 1000000	1 mm - 500 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 200 kg	-

Water jet cutting - Water jet cutting

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Water jet cutting 2D	10 - 1000000	1 mm - 1000 mm	1 mm - 1000 mm	-	-	-	1 mm - 1000 mm

Casting - Casting

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Centrifugal casting	100 - 10000000	10 mm - 1000 mm	-	-	5 mm - 500 mm	max. 200 kg	-
Continuous casting	100 - 10000000	-	5 mm - 500 mm	5 mm - 500 mm	5 mm - 500 mm	-	-
Gravity die casting	100 - 1000000	5 mm - 1000 mm	5 mm - 500 mm	5 mm - 500 mm	-	max. 200 kg	-
Hand moulding (sand casting)	10 - 1000000	5 mm - 1000 mm	5 mm - 500 mm	5 mm - 500 mm	-	max. 300 kg	-
Investment casting	100 - 1000000	5 mm - 1000 mm	5 mm - 500 mm	5 mm - 500 mm	-	max. 200 kg	-
Low-pressure casting	100 - 1000000	5 mm - 1000 mm	5 mm - 500 mm	5 mm - 500 mm	-	max. 200 kg	-
Machine moulding (sand casting)	100 - 1000000	5 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 200 kg	-
Pressure die casting	100 - 1000000	5 mm - 1000 mm	5 mm - 500 mm	5 mm - 500 mm	-	max. 200 kg	-
Thixoforming	100 - 100000	50 mm - 100 mm	50 mm - 100 mm	50 mm - 100 mm	-	max. 100 kg	-

Casting - Sintering & Powder Pressing

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Metal injection moulding (MIM)	100 - 1000000	5 mm - 1000 mm	5 mm - 500 mm	5 mm - 500 mm	-	max. 200 kg	-
Sintering	100 - 1000000	5 mm - 1000 mm	5 mm - 500 mm	5 mm - 500 mm	5 mm - 500 mm	max. 300 kg	-

Tool making - Cutting dies / deep drawing dies

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Deep-drawing dies	-	5 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 200 kg	-
Die replacement / wearing part manufacturing	-	-	-	-	-	-	-
Embossing / swage dies	-	5 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 200 kg	-
Fineblanking tools	-	5 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 200 kg	-
Follow-on composite tools	-	5 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 200 kg	-
Impact extrusion dies	-	5 mm - 1000 mm	5 mm - 500 mm	5 mm - 500 mm	-	max. 200 kg	-
Punching / Cutting tools	-	5 mm - 1000 mm	5 mm - 500 mm	5 mm - 500 mm	-	max. 300 kg	-
Rod extrusion dies	-	5 mm - 1000 mm	5 mm - 500 mm	5 mm - 500 mm	-	max. 200 kg	-
Trimming	-	5 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 200 kg	-

Tool making - Cutting tools (metal)

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Form milling cutter making	-	-	-	-	-	-	-

Tool making - Etching and Spark Erosion

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Chemical deburring	1 - 1000000	1 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	-	-
Electrochemical machining (ECM)	1 - 1000000	1 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 300 kg	-
Etching	1 - 1000000	1 mm - 1000 mm	1 mm - 500 mm	-	-	-	1 mm - 1000 mm
Laser removing	1 - 1000000	5 mm - 1000 mm	5 mm - 500 mm	1 mm - 500 mm	-	max. 300 kg	-
Spark erosion countersinking	1 - 1000000	5 mm - 1000 mm	5 mm - 500 mm	1 mm - 500 mm	-	max. 200 kg	-
Spark erosion wire cutting	1 - 1000000	5 mm - 1000 mm	5 mm - 500 mm	1 mm - 500 mm	-	max. 200 kg	-
Thermal deburring	1 - 1000000	1 mm - 1000 mm	-	-	1 mm - 500 mm	max. 300 kg	-

Tool making - Jigmaking

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Assembly jigs	-	5 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 200 kg	-
Clamping devices	-	5 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 200 kg	-
Drilling / milling jigs	-	5 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 200 kg	-
Gauges	-	1 mm - 1000 mm	0,5 mm - 500 mm	0,1 mm - 500 mm	-	max. 200 kg	-
Measuring / testing jigs	-	1 mm - 1000 mm	0,5 mm - 500 mm	0,1 mm - 500 mm	-	max. 200 kg	-
Welding jigs	-	5 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 200 kg	-

Tool making - Mould construction

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Blow moulds	-	5 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 200 kg	-
Extrusion dies	-	5 mm - 1000 mm	5 mm - 500 mm	5 mm - 500 mm	-	max. 200 kg	-
Foam molds	-	5 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 200 kg	-
Forging dies	-	5 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 200 kg	-
Gravity casting moulds	-	5 mm - 1000 mm	5 mm - 500 mm	5 mm - 500 mm	-	max. 200 kg	-
Injection moulds	-	1 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 200 kg	-
Modelmaking	-	5 mm - 1000 mm	5 mm - 500 mm	5 mm - 500 mm	-	max. 200 kg	-
Pressure die cast molds	-	5 mm - 1000 mm	5 mm - 500 mm	5 mm - 500 mm	-	max. 200 kg	-
Sintering	-	10 mm - 1000 mm	5 mm - 500 mm	5 mm - 500 mm	-	max. 300 kg	-
Squeeze moulds	-	5 mm - 1000 mm	5 mm - 500 mm	5 mm - 500 mm	-	max. 200 kg	-
Vacuum deep-drawing moulds	-	5 mm - 500 mm	5 mm - 100 mm	5 mm - 100 mm	-	max. 100 kg	-

Mechanical Engineering & Assembly - Assembly Group Manufacturing

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Adhesive bonding	1 - 1000000	1 mm - 1500 mm	1 mm - 1500 mm	1 mm - 1500 mm	1 mm - 1500 mm	max. 100 kg	1 mm - 1500 mm
Clinching	1 - 1000000	1 mm - 1500 mm	1 mm - 1500 mm	-	-	-	1 mm - 1500 mm
Folding	1 - 1000000	-	-	-	-	-	1 mm - 1500 mm
Gasketing / seal foaming	1 - 1000000	1 mm - 500 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 100 kg	-
Potting of components	1 - 1000000	1 mm - 1000 mm	1 mm - 1000 mm	1 mm - 1000 mm	-	-	-
Riveting	1 - 1000000	1 mm - 1000 mm	1 mm - 1000 mm	-	-	-	1 mm - 1000 mm
Shrinking / cold-stretching	1 - 1000000	10 mm - 1500 mm	-	-	1 mm - 100 mm	max. 100 kg	-

Mechanical Engineering & Assembly - Measuring & Testing

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Measuring / testing	-	0,1 mm - 1000 mm	0,1 mm - 1000 mm	0,1 mm - 1000 mm	0,5 mm - 1000 mm	max. 500 kg	-

Mechanical Engineering & Assembly - Mechanical Engineering

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Apparatus engineering	10 - 100000	10 mm - 100 mm	10 mm - 100 mm	10 mm - 100 mm	-	max. 500 kg	-
Handling technology	10 - 100000	10 mm - 100 mm	10 mm - 100 mm	10 mm - 100 mm	-	max. 500 kg	-
Mechanical engineering	1 - 100000	1 mm - 100 mm	1 mm - 100 mm	1 mm - 100 mm	-	max. 500 kg	-
Pneumatic engineering	10 - 100000	10 mm - 100 mm	10 mm - 100 mm	10 mm - 100 mm	-	max. 500 kg	-
Tool building	100 - 100000	10 mm - 100 mm	10 mm - 100 mm	10 mm - 100 mm	-	max. 500 kg	-

Gear making - Gear Making

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Bevel gear wheel	1 - 1000000	5 mm - 1000 mm	-	-	1 mm - 500 mm	max. 300 kg	-
Cogged belt pulley	1 - 100000	5 mm - 1000 mm	-	-	1 mm - 500 mm	max. 300 kg	-
Cylindrical gear / spur gear	1 - 1000000	5 mm - 1000 mm	-	-	3 mm - 500 mm	-	-
Rack (toothed)	1 - 1000000	10 mm - 1000 mm	5 mm - 500 mm	1 mm - 500 mm	5 mm - 500 mm	max. 300 kg	-
Sprocket (wheel)	1 - 100000	5 mm - 1000 mm	-	-	1 mm - 500 mm	max. 300 kg	-

Gear making - Threading

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Thread grinding	1 - 1000000	5 mm - 1000 mm	-	-	3 mm - 500 mm	max. 300 kg	-
Thread rolling	1 - 1000000	5 mm - 1000 mm	-	-	5 mm - 500 mm	-	-
Thread whirling	1 - 1000000	5 mm - 1000 mm	-	-	5 mm - 500 mm	max. 300 kg	-
Worm grinding	1 - 1000000	5 mm - 1000 mm	-	-	5 mm - 500 mm	max. 300 kg	-
Worm milling	1 - 1000000	5 mm - 1000 mm	-	-	5 mm - 500 mm	max. 300 kg	-
Worm rolling	1 - 1000000	1 mm - 1000 mm	-	-	1 mm - 500 mm	-	-

Surface treatment - Heat Treatment

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Annealing	1 - 1000000	1 mm - 1500 mm	1 mm - 1000 mm	1 mm - 1000 mm	1 mm - 500 mm	max. 500 kg	-
Carbonitriding	1 - 1000000	1 mm - 1500 mm	1 mm - 1000 mm	1 mm - 1000 mm	1 mm - 500 mm	max. 500 kg	-
Case hardening/surface hardening	1 - 1000000	1 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	1 mm - 500 mm	max. 300 kg	-
Flame-hardening	1 - 1000000	1 mm - 1500 mm	1 mm - 1000 mm	1 mm - 1000 mm	1 mm - 500 mm	max. 500 kg	-
Hardening	1 - 1000000	1 mm - 1500 mm	1 mm - 1000 mm	1 mm - 1000 mm	1 mm - 500 mm	max. 500 kg	-
Hardening and tempering	1 - 1000000	1 mm - 1500 mm	1 mm - 1000 mm	1 mm - 1000 mm	1 mm - 500 mm	max. 500 kg	-
Induction hardening	1 - 1000000	1 mm - 1500 mm	1 mm - 1000 mm	1 mm - 1000 mm	1 mm - 500 mm	max. 500 kg	-
Laser hardening	1 - 1000000	1 mm - 1500 mm	1 mm - 1000 mm	1 mm - 1000 mm	1 mm - 500 mm	max. 500 kg	-
Nitriding processes	1 - 1000000	1 mm - 1500 mm	1 mm - 1000 mm	1 mm - 1000 mm	1 mm - 500 mm	max. 500 kg	-
Oxidizing	1 - 1000000	1 mm - 1000 mm	1 mm - 800 mm	1 mm - 800 mm	1 mm - 500 mm	max. 500 kg	-
Vacuum annealing	1 - 1000000	1 mm - 1500 mm	1 mm - 1000 mm	1 mm - 1000 mm	1 mm - 500 mm	max. 500 kg	-

Surface treatment - Labelling / marking

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Laser depth engraving	1 - 1000000	1 mm - 1000 mm	1 mm - 800 mm	1 mm - 800 mm	5 mm - 500 mm	-	-
Laser marking / Laser inscription	1 - 1000000	1 mm - 1000 mm	1 mm - 800 mm	1 mm - 800 mm	5 mm - 500 mm	-	-
Marking	1 - 1000000	1 mm - 1000 mm	1 mm - 800 mm	1 mm - 800 mm	5 mm - 500 mm	-	-
Pad printing	1 - 1000000	1 mm - 1000 mm	1 mm - 500 mm	-	-	-	-
Screen printing	1 - 1000000	1 mm - 1000 mm	1 mm - 1000 mm	1 mm - 1000 mm	-	-	-

Surface treatment - Surface Treatment

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Anodizing	1 - 1000000	1 mm - 1500 mm	1 mm - 1000 mm	1 mm - 1000 mm	-	max. 300 kg	-
Blacking	1 - 1000000	1 mm - 1500 mm	1 mm - 1000 mm	1 mm - 1000 mm	-	max. 300 kg	-
Chromatizing	1 - 1000000	1 mm - 1500 mm	1 mm - 1000 mm	1 mm - 1000 mm	-	max. 300 kg	-
Chrome-plating	1 - 1000000	1 mm - 1500 mm	1 mm - 1000 mm	1 mm - 1000 mm	-	max. 300 kg	-
CVD-coating	1 - 1000000	1 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	1 mm - 500 mm	max. 300 kg	1 mm - 1000 mm
Electric dip-coat painting	1 - 1000000	1 mm - 1000 mm	1 mm - 800 mm	1 mm - 800 mm	-	max. 300 kg	-
Electroplating	1 - 1000000	1 mm - 1000 mm	1 mm - 800 mm	1 mm - 800 mm	-	max. 300 kg	-
Electropolishing	1 - 1000000	1 mm - 1000 mm	1 mm - 800 mm	1 mm - 800 mm	-	-	-
Enamelling	1 - 1000000	1 mm - 1000 mm	1 mm - 800 mm	1 mm - 800 mm	-	max. 300 kg	-
Fluidized sintering	1 - 1000000	1 mm - 1000 mm	1 mm - 800 mm	1 mm - 800 mm	-	max. 300 kg	-
Galvanizing	1 - 1000000	1 mm - 1000 mm	1 mm - 800 mm	1 mm - 800 mm	1 mm - 800 mm	max. 300 kg	1 mm - 1000 mm
Laminating	1 - 1000000	1 mm - 1000 mm	1 mm - 800 mm	1 mm - 800 mm	-	max. 300 kg	1 mm - 1000 mm
Molten metal immersion	1 - 1000000	1 mm - 1000 mm	1 mm - 800 mm	1 mm - 800 mm	-	max. 300 kg	-
Nickel plating	1 - 1000000	1 mm - 1500 mm	1 mm - 1000 mm	1 mm - 800 mm	-	max. 300 kg	-
Parts cleaning/degreasing	-	1 mm - 1000 mm	1 mm - 800 mm	1 mm - 800 mm	-	max. 300 kg	-
Phosphatizing	1 - 1000000	1 mm - 1000 mm	1 mm - 800 mm	1 mm - 800 mm	-	max. 300 kg	-
Pickling	1 - 1000000	1 mm - 1000 mm	1 mm - 800 mm	1 mm - 800 mm	-	max. 300 kg	-
Plasma coating	1 - 1000000	1 mm - 1000 mm	1 mm - 800 mm	1 mm - 800 mm	1 mm - 500 mm	max. 300 kg	-
Powder coating	1 - 1000000	1 mm - 1000 mm	1 mm - 800 mm	1 mm - 800 mm	-	max. 300 kg	-
PVD-coating	1 - 1000000	1 mm - 1000 mm	1 mm - 800 mm	1 mm - 500 mm	1 mm - 500 mm	max. 300 kg	1 mm - 1000 mm
Robot painting	1 - 1000000	1 mm - 1000 mm	1 mm - 800 mm	1 mm - 800 mm	-	max. 300 kg	-
Rotofinishing, barrel finishing	1 - 1000000	1 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	-	-
Sand blasting	1 - 1000000	1 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 100 kg	-
Spray-painting	1 - 1000000	1 mm - 1500 mm	1 mm - 1000 mm	1 mm - 1000 mm	-	max. 300 kg	-
Surfacing / build-up welding	1 - 1000000	1 mm - 1500 mm	1 mm - 1000 mm	1 mm - 1000 mm	1 mm - 500 mm	max. 300 kg	1 mm - 1000 mm
Thermal spraying	1 - 100000	1 mm - 1500 mm	1 mm - 1000 mm	1 mm - 1000 mm	1 mm - 500 mm	max. 300 kg	-

Solid forming - Solid Forming

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Bar extrusion	100 - 1000000	5 mm - 1000 mm	5 mm - 500 mm	1 mm - 500 mm	5 mm - 500 mm	-	-
Drop forging	1 - 1000000	-	-	-	-	max. 500 kg	-
Impact extrusion	100 - 1000000	5 mm - 1000 mm	-	-	5 mm - 500 mm	-	-
Open die forging	100 - 1000000	-	-	-	-	max. 300 kg	-
Ring rolling	100 - 1000000	5 mm - 1000 mm	-	-	5 mm - 500 mm	max. 300 kg	-
Rotary kneading / swaging (solid section)	100 - 1000000	5 mm - 1000 mm	-	-	5 mm - 500 mm	-	-

Wires and Springs - Wire & Spring Bending

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Spring bending	10 - 1000000	-	-	-	1 mm - 50 mm	-	-
Wire bending	10 - 1000000	-	-	-	1 mm - 50 mm	-	-

Tubes and Pipes - Pipe & Tube Manufacturing

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Flange bending, profile bending	10 - 1000000	-	1 mm - 500 mm	-	-	-	10 mm - 500 mm
Hydroforming	100 - 1000000	-	-	-	-	-	-
Pipe bending	10 - 1000000	10 mm - 1000 mm	-	-	1 mm - 100 mm	-	-
Pipe forming	10 - 1000000	10 mm - 1000 mm	-	-	1 mm - 100 mm	-	-
Rotary kneading / swaging (hollow section)	100 - 1000000	10 mm - 500 mm	-	-	1 mm - 300 mm	-	-
Water jet cutting, tube & section	10 - 1000000	10 mm - 1000 mm	10 mm - 500 mm	1 mm - 200 mm	10 mm - 300 mm	max. 300 kg	10 mm - 1000 mm

Finishing - Finishing

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Belt grinding	1 - 1000000	-	1 mm - 500 mm	-	-	-	1 mm - 1000 mm
Centreless grinding	1 - 1000000	0,5 mm - 500 mm	-	-	0,5 mm - 100 mm	max. 100 kg	-
Circular honing - external	1 - 1000000	1 mm - 1000 mm	-	-	1 mm - 320 mm	max. 300 kg	-
Circular honing - internal	1 - 1000000	1 mm - 1000 mm	1 mm - 1000 mm	1 mm - 1000 mm	1 mm - 800 mm	max. 300 kg	-
Coordinate jig grinding	1 - 1000000	1 mm - 1000 mm	1 mm - 500 mm	0,5 mm - 600 mm	-	max. 300 kg	-
External cylindrical grinding	1 - 1000000	5 mm - 1000 mm	-	-	1 mm - 320 mm	-	-
Internal cylindrical grinding	1 - 1000000	1 mm - 1000 mm	-	-	1 mm - 100 mm	-	-
Non-circular / crankshaft grinding	1 - 1000000	1 mm - 500 mm	-	-	-	max. 200 kg	-
Precision honing	1 - 1000000	0,5 mm - 1000 mm	-	-	1 mm - 320 mm	-	-
Profile grinding	1 - 1000000	1 mm - 1000 mm	1 mm - 500 mm	1 mm - 600 mm	1 mm - 320 mm	-	-
Roller finishing external	1 - 100000	1 mm - 500 mm	-	-	1 mm - 300 mm	max. 200 kg	-
Roller finishing internal	1 - 100000	1 mm - 500 mm	-	-	1 mm - 300 mm	max. 200 kg	-
Shot blasting	1 - 1000000	1 mm - 1000 mm	1 mm - 500 mm	1 mm - 500 mm	-	max. 100 kg	-
Surface grinding machine	1 - 1000000	1 mm - 1000 mm	0,5 mm - 500 mm	0,5 mm - 600 mm	-	max. 300 kg	-
Surface lapping	1 - 1000000	1 mm - 1000 mm	-	-	1 mm - 500 mm	-	-

Cables, tubes and pipes (assembled) - Cable Preparation

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Cable preparation	-	-	-	-	10 mm - 300 mm	-	-

Cables, tubes and pipes (assembled) - Tubes and pipes (assembled)

Technology	Lotsize	Length	Width	Height	Diameter	Weight	Material Strength
Hydraulic pipes	-	-	-	-	10 mm - 300 mm	-	-
Hydraulic tubes	-	-	-	-	10 mm - 300 mm	-	-
Industrial tubes	-	-	-	-	10 mm - 300 mm	-	-

further Technologies

Company description

Goodwill Precision Machinery Co.,Ltd (GPM),is a China manufacture established in 2004,
Specialized in offering precision machining service for non-standard mechanical parts, spare parts, metal fabrication, precision welding, design & assembly, fixture and jigs with supplied drawings, prototype,CNC precision machining,customed machining parts......

Manage our company with ISO9001:2008 , TS16949 ,ISO13485 .ISO14001 certificated, customized ERP & Barcode Scan System.
Our advantages:
Easy to communicate in English,German,Japanese
One Package Services
Fast lead time
Stable Quality
Rigorous work attitude
No quantity limited

5-Axis CNC Machining

Manufacturer: OKUMA

Control: ±0.002mm

Year of Construction: 2017

Technologies:
HSC milling
Form milling (3 D)
Full-range milling (including turning)
5-axis milling machines

Horizontal CNC milling

Manufacturer: OKUMA

Control: ±0.005mm

Year of Construction: 2017

Technologies:
HSC milling
Milling
Drilling / threading / tapping

3m x 2m -- CNC milling

Manufacturer: TAIQUN

Control: ±0.005mm

Year of Construction: 2017

Technologies:
Milling
Drilling / threading / tapping

CNC Line1

Manufacturer: Perfect Jet

Control: ±0.005

Year of Construction: 2013

Technologies:
HSC milling
Form milling (3 D)
Full-range milling (including turning)
Milling
Industrial / On-site-assembly
Engraver milling

CNC LINE 1

Manufacturer: Perfect Jet CNCmanchining center

Control: ±0.005mm

Year of Construction: 2006

Technologies:
Full-range milling (including turning)
Milling
Engraver milling

CNC Line 3

Manufacturer: MAZAK

Control: ±0.005

Year of Construction: 2007

Technologies:
HSC milling
Form milling (3 D)
Full-range milling (including turning)
Surface grinding machine
Milling
Engraver milling

CNC Line 2

Manufacturer: Brother

Control: ±0.003

Year of Construction: 2015

Technologies:
HSC milling
Form milling (3 D)
Additive Manufacturing (general)
Full-range milling (including turning)
Milling
Engraver milling

Type G Automatic lathes

Manufacturer: Star

Control: MAX φ28mm

Year of Construction: 2016

Technologies:
Turning
Automatic turning (bar)
Centering / end facing
Shaft machining
Full-range turning (including milling)

Swiss Turning

Manufacturer: CITIZEN / Star

Control: ±0.003mm

Year of Construction: 2010

Technologies:
Turning
Automatic turning (bar)
Swiss turning

NC turning with milling head

Manufacturer: TAKISAWA

Control: ±0.005mm

Year of Construction: 2016

Technologies:
Deep-hole drilling
Hard turning
Turning
Shaft machining

Vertical Turning for heavy parts

Manufacturer: Goodway

Control: φ800mm, 500kg, ±0.005mm

Year of Construction: 2016

Technologies:
Hard turning
Turning

Precision EDM Wire-Cut

Manufacturer: Agie Charmilles

Control: ±0.003mm

Year of Construction: 2010

Technologies:
Form milling cutter making
Spark erosion wire cutting

ID/OD Grinding machine

Manufacturer: GOTEN

Control: ±0.005mm

Year of Construction: 2010

Technologies:
Coordinate jig grinding
Circular honing - external
Circular honing - internal
Surface grinding machine
Surface lapping
Internal cylindrical grinding
Precision honing
External cylindrical grinding

General Turning

Manufacturer: Guangzhou

Control: ±0.01

Year of Construction: 2015

Technologies:
Deep-hole drilling
Hard turning
Turning
Broaching
Centering / end facing
Shaft machining

Tapping machine

Manufacturer: 智恒

Control: ±0.05

Year of Construction: 2006

Technologies:
Turning
Swiss turning
Sawing

Milling

Manufacturer: Taiwan Standard 5M

Control: 500*300*320

Year of Construction: 2015

Technologies:
-

Cleaning Inspection Room

Manufacturer: GPM

Control: Cleaning room

Year of Construction: 2008

Technologies:
Measuring / testing

CMM

Manufacturer: Wenzel

Control: ±0.002mm

Year of Construction: 2006

Technologies:
Measuring / testing

Optcial Measuring Machine(Projector)

Manufacturer: GoodVision

Control: ±0.002mm

Year of Construction: 2010

Technologies:
Measuring / testing

Assembly Workshop

Manufacturer: Goodwill

Control: Cleaning Room, Crane

Year of Construction: 2012

Technologies:
Electromechanical assembly
Industrial / On-site-assembly
Mechanical assembly

Ultrasonic Cleaning

Manufacturer: GPM

Control: Cleaning

Year of Construction: 2010

Technologies:
-

Company images

company gate

Brother cnc machine center

Staff style

Quality Inspection

Mirror polished high precision parts

S45C nickel plating turning Flange

S55C hard chrome plating milling guide

Components of medical devices

SS400-D Hard Chrome plating turning part

Materials

Steel
- Structural steel
- Case hardening/tempering steel
- Stainless steel (rust-proof V2A)
- Stainless steel (rust-proof V4A)
- Free-cutting/mild steel
- Tool steel
- Spring steel
- Cold extruding steel
Cast metals
- Cast steel
- Cast iron
Light metals
- Aluminium and aluminium alloys
- Magnesium and magnesium alloys
- Titanium and titanium alloys
Heavy metals
- Copper-zinc alloys (brass)
- Copper and copper alloys
- Zinc and zinc alloys
- Solder
Plastics/synthetic materials
- Thermoplastics
- Acrylic (PMMA)
- High performance plastic
- Thermosets
- Elastomers
- Natural and vulcanised rubber
- Glass fibre-reinforced plastic
- Carbon fibre-reinforced plastic
- Particle reinforced composite materials
Advanced Materials
- Nickel alloy (Inconel, Monel, Hastelloy)
- Carbide
Sintered materials
- Metal powder for formed parts
- Metal powder for hard metal
Non-metal inorganic materials
- Ceramics
- Graphite
Precious metals
- Silver
- Gold
- Other precious metals

Automation and control engineering
Automotive and vehicle construction
Lighting industry
Electrical industry
Power generation and transmission industry
Mechanical engineering
Fittings engineering
Apparatus engineering
Drive and gear engineering
Plant engineering and construction
Machine tool manufacturing
Special purpose machinery manufacturing
Military engineering
Precision engineering, mechatronics and optics
Medical technology
Measurement and control technique, laboratory equipment

References

Kerngeschäft: CNC-Fräsen, 3, 4 und 5-Achsen. CNC-Drehen, SWISS TURNING. Schweißen, Baugruppen, Flach- und Rundschleifen, Wärmebehandlung, Oberflächenbehandlung, Casting, Stanzen, Spritzguss, konventionelles Drehen und Fräsen. Keine Mindestmengen.

Goodwill Precision Machinery Ltd. (German Office)

Contact names

Simon Shen

Amanda LI

Manfred Princi

Allan Liu

Sophia Zhou

Technologies

Machining - Milling

Engraver milling

Form milling (3 D)

Full-range milling (including turning)

HSC milling

Milling

5-axis milling machines

Machining - Turning

Automatic turning (bar)

Broaching

Centering / end facing

Deep-hole drilling

Full-range turning (including milling)

Hard turning

Shaft machining

Swiss turning

Turning

Sheet metal processing - Sheet Metal Forming (Stamping, Deep-drawing)

Deep-drawing

Fineblanking / pressing

Plate rolling / bending

Punching / pressing (Out-of-tool)

Roll forming

Spinning

Stamping and bending machine (Bihler)

Sheet metal processing - Sheet Metal Processing

Bending / folding

Combined forming laser cutting / punching

Laser cutting, tube & section

Laser cutting 2D

Oxyacetylene cutting

Plasma fusion cutting

Plate straightening

Punching / nibbling

Shearing (rectangular blank/strip)

Structural Steelwork & Welding - Welding

Electron-beam welding

Flash-butt welding

Friction welding

Inert gas shielded arc welding (MIG/MAG)

Inert gas shielded arc welding (Plasma)

Inert gas shielded arc welding (TIG)

Laser-beam welding

Manual electrode welding

Projection welding

Seam welding

Soldering

Spot welding

Stud welding

Vaccum brazing

Mechanical Engineering & Assembly - Assembly

Electromechanical assembly

Industrial / On-site-assembly

Mechanical assembly

Machining - Drilling / Sawing

Drilling / threading / tapping

Sawing

Ultrasonic drilling

Machining - Machining (Extruded Profiles)

Machining of extruded sections

Structural Steelwork & Welding - Welded constructions / Structural Steelwork

Machine frames / bases / racks

Welded constructions (weldments)

Plastics & Rubber - Forming (Plastics & Rubber)

Thermoforming

Plastics & Rubber - Injection Moulding, Extruding

Compression moulding

Extrusion blow moulding

Extrusion (profile)

Foaming

Injection moulding

Injection-mould around inserts