We are your PTFE Competence Center PTFE Poly-tetra-fluoro-ethylene, is a unique material. It reacts very difficult with other chemicals. Even highly aggressive acids, it can not destroy. Temperatures up to 260 ° C it is without difficulty. And thanks to the extremely low surface tension exist virtually no substances which adhere to PTFE. These are outstanding qualities that we know specifically use. For example, in the form of compounds that we develop with lots of experience and also a certain penchant for perfection for you. For high-performance plastics that meet your exact requirements, our goal and our skills are. We will assist you. We are your industrial plastic Partner With our modern machinery we provide on your behalf ago PTFE semi-finished and edit CNC-machined into finished parts. As we the whole process - from the design part of the material - control themselves and thus achieve a high level of vertical integration, we are largely independent of external suppliers. This guarantees a consistently high quality and a reliable, flexible and cost-effective production. From consulting to series production, we are on your side and let us liked to be challenged by your individual tasks. We are more than PTFE Sure PTFE is one of the most interesting plastics and is used just as successfully in machine and plant construction as in medicine or semiconductor technology. However, sometimes material properties are required, which are lighter, cheaper or faster to achieve with other high performance plastics. And since we want to produce materials that are tailored to your needs, we process, for example, the following plastic materials: Ethylene-tetrafluoroethylene (ETFE), which is used for example in architecture Polychlorotrifluoroethylene (PCTFE), known by its extreme form stability, it is for pumps, compressors and used in refrigeration Polyvinylidene fluoride (PVDF), which is widely used in the electrical and medical Polyether ether ketone (PEEK), with numerous applications in vehicle or high-voltage technology but also in the pharmaceutical and chemical industry Polyoxymethylene (POM), a versatile plastic that is the first choice for many construction parts Polyphenylsulfone (PPSU), a highly temperature-and impact-resistant plastic for the air and space technology, the vehicle but also for electrical engineering Polypropylene (PP), a
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    Certifications
    ISO 9001:2008

    Watch

    HGS GmbH
    locate a reliable partner in the heavy machine? We will be happy to offer our capacities in Hirschfelde and look forward to your demand requests. The Hirschfelder gripper and steel construction GmbH has 65 employees with mechanical devices and machines of the basic industries to large equipment repair, supplies equipment parts and supply processed Cut plates. Since its foundation in 1991, a 60-year tradition of our location continues. We see ourselves as a solution and service. This includes increasing a special with. For production we are 4000m ² factory building and a high-performance machinery available. The workshop services include in particular the areas of cutting, Machining, welding and steel construction. Our design office is for customer requests and processing of customer sketches available. Heavy plate cutting up to 200mm thickness we lead as Autogenschnitt on modern gas cutting equipment.We are happy to take your digital data for the internal sectional contour. We are certified as a manufacturer of steel assemblies according to DIN EN 1090-2 EXC3 (formerly DIN 18800-7 class E). With a monthly average of 800 welding hours we have in this area over constant practice, and professional experience. Our engineering workshop provides, inter alia, Drehtechnik up to Ø 3000, NC-turning, boring machines, milling machines, CNC machining and radial drilling machines. Our range of services include: - Welded assemblies with mechanical processing - Cut blanks up to 200mm thickness - Including wearing partsHoles, threads for crushers, grippers, screening plants, power plants - Perforated sheets for Sieblanlagen - New construction and repair of grippers - Construction Service - Repair and construction attachments - CNC milling up to 1250 x 508 x 635 - Turning up to Ø800 x 4000 and Ø3000 x 2100 - Rounds to Bl 20 x 2000 We constantly have an extensive heavy plate bearing (DIN EN 10029) in the grades: Unalloyed structural steel: S235, S355 (DIN EN 10025-2) Wear-resistant steels: Hardox 400/450/500 Hardened and tempered structural steels with higher yield strength: S690QL1 (DIN EN 10025-6) Quenched and tempered steels: C45 (DIN EN 10083-2) Case hardening steels: 16MnCr5 (DIN EN 10084) Pressure vessel steels: P265GH, P355NL1, 16Mo3 (DIN EN 10028-2) More information is available under www.hgs-hirschfelde.de. We look forward to your inquiries.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2022
    Certifications
    DIN EN ISO 3834
    The Adrian Michel Group AG is a group of companies, centrally located in the Swiss Mittelland. Our core competencies are in the areas of cutting, bending and deep drawing as well as in the assembly of complete assemblies. A specialty is visible parts for special design requirements. Depending on how the stamping we take care of the specific post-processing such as degreasing, grinding, stud welding, drilling, milling, thread cutting, finishing or thermal treatment. Our customers include international companies in the fields of power generation and distribution, household appliances, machinery and vehicle, etc. Thanks to our own tool and own design is the knowledge about the customer solution in our hands.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1925
    Certifications
    DIN EN ISO 3834
    Meislitzer Präzisionstechnik mainly produces customer-specific single components as well as prototypes and small batches for existing customers from a variety of industries including machinery and plant engineering, automotive, electronics, semiconductor, energy and medicine. Our employees are highly experienced in working with a complete range of specialized materials such as tool steels, carbides, synthetic materials and ceramics and have mastered many quite tricky manufacturing challenges so far. The combination of accuracy, speed in response, flexibility and straightforward approach has been our company’s strategy for success from the very beginning. For this reason we are in the position to supply our customer’s development divisions with machine parts, spares and prototypes within a short time. We guarantee delivery of premium and custom-made products in the shortest possible time. Our customers from various economy sectors are ensured fast and competent Service.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1992
    Certifications
    ISO 9001:2015
    We started in 1988 with the production of thermosets all materials and brake linings. From this experience, we combine metal / plastic pairings in-house development and own production. Hot glue the metal / plastic products. We are with our own brands worked on maintenance-free plain bearings market and have the brands AS-F 100 and VaneStar unique materials in use worldwide. The close connection to the engineering, automotive engineering, compressed air equipment industry, special machine and many we have and a year ago decided metalworking expand. Therefore, the Schuler Technoparts was founded in 2009 and equipped with a large modern machinery. With our 5-axis milling machine with rotary table 700 in connection to SolidCam we can cover a wide spectrum. These are planning a 3-axle long bed milling machine and a small 5 axis milling machine. With our 12 stations 3 axis EMCO and the HSC Datron and an ELB Surface Grinder with 600x1.000 working surface we can continue to cover operations. At the EMO we bought new 4-axis CNC lathe EMO Turnmill 65 Bigbore for 95 mm rods D to 420 mm, Zoller adjustment equipment for milling and turning, Mitutoyo measuring machine with measuring range 700x500x400 mm Finishing machine for deburring and polishing Band saw for round material D 360 mm and flat 500x250mm - Polishing, deburring, finishing, barrel finishing, assembly, surface treatment - Complete production - Measuring and testing Delivery program: Jacks, complete machining, plastic parts, VA, PEEK, PAI, devices and plain bearings, slides, pumps and compressors, friction materials, insulation products Industries: construction machinery, cranes, cranes, presses, manufacturing, tooling, power transmission, measuring equipment, tripods, cleanroom technology, special engineering, mechanical engineering, vehicle
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1988
    Certifications
    ISO 9001:2008
    The ABW Housing Technology is part of the ART group [www.art-gmbh.de] and shall, within the ART group for the field of sheet metal processing. We produce in addition to our main plant in Weingarten also in our factory in Plakowice / Poland. Overall, we have the following machinery in use: 2 Trumpf laser machine 4 Trumpf punching machines 8 Kant Trumpf machines 4-/5- and 6-axis stop 2 surface grinders 1 Datron milling machine 1 table adhesive for composite materials with small form and position tolerances 1 powder coating plant We manufacture control panels, control cabinets, machine frames and, lee, PC racks, trays and various other sheet metal parts as per customer requirements in different materials [steel, aluminum, stainless steel or precoated plates]. In our own powder coating facility, we work with our customers' products according to their specifications. Our design works with the Siemens PLM Software NX6 and we are happy to assist our customers at the design orconstruct according to customer specifications and provide the CAD models after conclusion. The ART Group operates as a system supplier and value-added partner in electrical engineering and mechatronics. The combination of all service modules from housing technology, cable assembly, control engineering, mechatronics and a customer-oriented logistics we call SYSMART ® - a distinctive term for the reliability of our group of companies. Our customers include companies such as Heidelberger Druckmaschinen, OTIS Elevators, Trumpf, INDEX and NIMBUS. On our website http://www.art-gmbh.de You can get further information about the ART group. The Enclosures division can be reached directly via http://www.abw-info.de
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1932
    Certifications
    ISO 9001:2008
    The Forte + Wegmann GmbH & Co. KG was founded in 1950. Located located in a former center of the metal industry, our roots originally in the production of machine parts for the textile industry. Addition to specializing in the wire processing in the field needle manufacturing and processing, we were involved in the course of history in the fields of metal forming, punching and deep drawing. In 1980, in a generation change the management was handed over to the daughter of a founder of the company, the way was open for expansion and future-oriented technologies. Thus, since 1982, the CNC milling an important business of the company. In conjunction with the latest CAD / CAM systems is the process, then and now, always conducted with the highest standards. In the following decades Forte + Wegmann has developed technologies and products for various markets. For example, we manufacture metal housing for electronic modules, we are active in tool and mold making, we produce erosion electrodes, etc.Currently, we produce a wide selection of parts for the aerospace industry and supply industrial partners throughout Germany. In order to raise the profile of our corporate priorities Forte + Wegmann is divided into three business areas since 2004. The extension of our original core competence, the CNC milling technology, which is now incorporated "divicut" in the business, was a logical step for us to remain competitive for the future challenges. The second business, "divisign" includes the three-dimensional measuring technology and digitization with optical instruments. So "divisign" offers 3D scanning services and software for 3D metrology, reverse engineering, 3D visualization, and - in conjunction with "Divicut" - Rapid Prototyping (HSC / 3D printing) to. "Divimac", the third division, dedicated to the assembly of components. In this business modules are completed.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1950
    Certifications
    ISO 9001:2015

    Watch

    R. Gysi AG
    We develop and manufacture technical plastic parts in a sophisticated design and the highest precision for all industries. Customer orientation, service and quality are our hallmark. Innovative solutions for technically demanding tasks, from concept to series production, the focus of our work. Our focus lies in the realization of economically optimal solutions for you. In partnership develop innovations that bring real value to you. Through our range of services you need from design to the finished series product only one partner for all questions relating to the plastic. Precision injection molding, multi-component injection molding (2K and 3K), thermoplastic foam (TSF), filter technology, gears, and Insert-/Outsert-Technik and Verabreitung of high-performance plastics form the basis of our production technologies. Your demanding components we manufacture injection molding machines with clamping forces from 150 kN to 5000 kN and shot weights from 0.3 g to 2,000 g, the required injection molds are manufactured in our in-house mold or also with international partners. The surfaces of your articles we finish by painting, printing, EMC coatings and decorative metal coatings. For joining components we use welding and bonding techniques. We are happy to install your assemblies or complete products and pack them after function testing in retail packaging.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1968
    Certifications
    ISO 9001:2008

    Watch

    HOFMANN GmbH
    CRAFTS AND QUALITY SINCE 1887! Plant Apparatus Welded assemblies up to 10 tons unit weight in steel and stainless steel. Pharmaceuticals - packaging technology Textile Drive Technology Food industry Ventilation Equipment Engineering Of dryers Founding in 1887: Georg Friedrich Hofmann over a hundred years ago in Blaufelden his first money as a freelancer. In 1920 the company went over to his son Friedrich, he was assisted by his brother Hermann. Followed in 1953 by Wilhelm Hofmann another generation. Wihelm Hofmann paved the way for the present success of the company. 1986 Heiner, Hofmann was ein.Begleitet in the family business by his two brothers, Frederick and Hermann Hofmann directs Heiner now the family for four generations. At about 4300 square meters manufacturing and assembly areas is produced today with more than 60 employees.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1887
    Certifications
    DIN EN ISO 3834

    Watch

    Conal GmbH
    Conal Ltd. is a manufacturing company and provides constructive and decorative aluminum profiles and sheets, usually close tolerances in the specifications. Further cooperation in the components and systems manufacturing, sourcing partnership in projects (OEM) and the development of products and the construction of prototypes The focus is on the machine CNC milling up to 7.00 x 1.25 m (4/5-achsig), automation in small part machining, partially automated plate profile cutting and processing (from 4mm plate) Summary: Machining: CNC milling, sawing, punching Machining (subcontracting) Pre-processing of aluminum extrusions Processing of rolled material Machining including procurement of materials (components manufacturing) Surface Engineering: Sand, anodising, painting System supplier (OEM) for best. industries Partnership in development / construction, AV
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1983
    Certifications
    WVG alu-tec GmbH has specialized in the development and production of cast elements of aluminum in permanent mold casting. One of our strengths is our flexibility in achieving the ideas and requirements of our customers in connection with the manufacture of products that meet the highest quality standards. Starting with the conception to the finished product and beyond in the packaging and logistics, we are your competent partner for consulting, design and development, production and surface finishing of cast aluminum parts. When it comes to innovative, economical solutions in the handling and processing of aluminum components, we offer you our complete service - "Everything under one roof" - to the side. We manufacture components made of cast aluminum for electrical, furniture, automotive, pumps, machinery, equipment and medical industries
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2001
    Certifications
    ISO 9001:2015

    Watch

    Optiwa B.V.
    As a production partner to Original Equipment Manufacturers for more than 50 years, Optiwa B.V. (Optiwa) supplies our customers with precision mechanical parts and mechanical assemblies. Optiwa's critical success factors lies in its efficiency, design for manufacturing (DFM) support and a highly efficient production of products to tolerances in the sub-micron range. A team of skilled personnel ensures an uninterrupted production flow of products that meet specifications, quality and delivery commitments - time and time again. Optiwa is your first choice partner for series production of very accurate and complicated products at the right cost. Capabilities * Range of state-of-the-art machining centres * Turning and milling of very small parts to big parts up to 800mm * Range of robotized machines for production 24/7 (minimum supervision and lower production cost) * Sub-micron technology * Precision mechanical assemblies (vacuum cleaned, where necessary) * Series production up to thousands per annum * Controlled environment measuring department * Excellent supply base of surface and thermal treatment services * Design for manufacturing (DFM) support
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1957
    Certifications
    ISO 9001:2008

    Watch

    Rombach GmbH
    Medium-sized metal working & plastic processing company with particular emphasis on: - Punching & bending technologies - Sheet metal processing - Housing & frame constructions - Assembly groups & welded constructions - CNC turning - CNC milling - Illuminated displays & LED frames - Advertising facilities in general - POS solutions - Assembly & packaging - Processing & surface refining of any kind - Own tool construction & manufacture & - Sourcing the Far East Our strengths are flexibility, reliability & liability.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1969
    Certifications
    ISO 9001:2015
    We are an owner-managed family business, which has been successfully operating in the market for over 40 years. We manufacture prototypes, individual parts or small to medium-sized series for the medical technology, mechanical engineering, electronics, hydraulics, laser technology and aerospace industries. Our employees work to the highest quality standards on state-of-the-art CNC-controlled machining centers.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1970
    Certifications
    ISO 9001:2015
    We are Payr Gabriele and Peter Paul Payr started as entrepreneurs in 1998. In the years that followed, the number of employees grew steadily and reached 20 in 2007. As a result of extensive engineering projects and the development of PAYR Production, the number of employees continued to grow - currently 55 people are employed. Peter Paul Payr has been living out his vision of "We are PAYR!" for 20 years. An extensive investment and organizational development project is now helping to ensure growth for the company and develop confidence for the future. Because "solution through technology" can only succeed in a team - become a new member of "We are PAYR!". Locations Patergassen & Graz & Klagenfurt PERFORMANCE RANGE - Engineering - Development of product concepts - Design - individual parts and entire systems - project execution - Documentation PRODUCTION / ASSEMBLY / COMMISSIONING - Production - Single part production - Optimization of manufacturing and assembly processes - Components & systems assembly (clean room ISO 6) SERVICE & MORE - Services - Calculations & simulations - Balancing rotating parts - Test execution
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1998
    Certifications
    ISO 9001:2015
    Custom-Made Solutions for Individual Products In accordance with customer demands and wishes, ISOVOLTA – in addition to manufacturing high-quality laminates in the form of sheets, tubes and rods – also offers processing of thermoset materials. Different materials are shaped by processes such as cutting, grinding, drilling, turning, milling, gluing, mounting, punching, jet cutting or painting according to individual customer specifications. Based on our expertise in material-specific selection and production-technical implementation as well as our years of experience in job shop, serial, and mass production, we are able to develop the best possible process for each product. Range of Materials Phenolic Cellulosic Paper / PFCP Phenolic Cotton Cloth / PFCC Phenolic Glass Cloth / PFGC Melamine Cotton Cloth / MFCC Melamine Hard Glass Cloth / MFGC Epoxy Glass or Glass Roving Cloth / EPGC Epoxy Glass Mat / Polyester Glass Mat / EPGM / UPGM Melamine-Lined Hard Paper / MKHP / INBORD® Silicone Glass Cloth / SIGC Special Laminates / Special Materials / CFRP, KP, PIGC MAGNOVAL® CONT AVAL® GX_11.3309 GWS RP High-Performance Rings GF-UP / GF-EP ISOVAL® R-AL Competence in Soldering Equipment Soldering Frames are primarily used to transport PCBs in soldering machines while simultaneously fixating “through-hole components” by using Top Hat Systems. With our specially developed ESD material, which is able to endure high temperatures and chemical resistance, the ISOVOLTA Soldering Frames are able to withstand thousands of soldering cycles. ISOVOLTA Soldering Frames and masks are custom-made innovative products. The design of the mask is defined by the PCB, the machine and the customer`s requirements. Possible combinations of the ISOVOLTA Universal Frame, ISOVOLTA Soldering Frame and the ISOVOLTA Flexible Suppressing System. (ISOVOLTA Suppressing System: ensure suppression and alignment of critical PTH components.) Combination ISOVOLTA Soldering Mask and ISOVOLTA Suppressing Panel for reliable and accurate alignment of PTH components. Innovative solutions guarantee quick and comfortable handling. Product combinations Top Hat Systems Universal Frames Flexible Top Hat System Magnetic Carrier Coating Frames Pressfit Tools Router Tools Hand Soldering Tool
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1969
    Certifications
    ISO 14001
    Dear Ladies and Gentlemen We would like to introduce ourselves. For more than 30 years, the company set its own knowledge, experience, our company has been transformed from a sole proprietorship to a limited company in the area consignment stock and know-how in the field of mechanical manufacturing as a supplier outsourcing partner for Verfügung.Seit 2010. Some of these industries we serve are: Office, equipment, laboratory, chemical, textile, plastic industries and car racing (Formula 1) Our aim is always to satisfy our customers through quality work, in order to make a good and lasting business relationship. We manufacture, control and maintain the quality in the sense of ISO 9001 We would be glad to establish a business relationship with you and would appreciate a contact.
    > Go to profile
    Employees
    < 5
    Year of foundation
    2010
    Certifications
    We are a technical specialist retailers with a focus on fluid technology. Our product range includes hoses and fittings for all applications and sealing technology and profiles. Another mainstay is the temperature control. Here we supply tempering couplings, water couplings, quick couplers, connecting tubing, stoppers and all accessories. In the area of ​​the tubing, we have a great choice, for every purpose. We manufacture hose assemblies according to your specifications and deliver (on request pressure tested) ready for installation on off. Also the production of gaskets as per drawing made of elastomer and hardboard panels is easy for us (Thanks to new CAD plotter).
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1983
    Certifications
    ISO 9001:2008
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    2002
    Certifications
    IATF 16949:2016
    Pascal Kierstein Coordination office Your partner for mechanical and electrical installations. We take care of your project as a whole.
    > Go to profile
    Employees
    < 5
    Year of foundation
    2021
    Certifications
    The firm Joh Treschnak was founded in 1978. She pursued from the beginning a two-pronged strategy based on metal products according to customers' drawings on the one hand and thermoplastic injection molded parts on the other. In line with the growing demands in the metal-processing area of ​​our machinery has been steadily expanded. The Ter Steege Groep 2003 took over its long-standing Liferanten and supports the company in their current business fields in full. By moving to the new factory buildings at the site Zollhausstraße 5 in 2004, the company also equips spatially for future requirements For more info you like to see at our presentation.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1978
    Certifications
    ISO 9001:2008
    FEF Components & Devices GmbH is a manufacturing service provider in the field of welding and joining technology, specializing in producing complex joining structures. Although the manufacturing focus is on welding technologies, adhesive bonding, and arc-based brazing are also part of our competencies. With our expertise in joining technology and our state-of-the-art machinery, we can particularly automate and mass-produce welding tasks that were previously performed manually at low cost using modern robot and welding technology. This enables us to economically produce both large (> 10,000 parts) and small batch sizes with high quality. When processing your order, we offer speed, flexibility, and adherence to schedules while maintaining high and consistent quality through the use of our robot-based welding systems. The quality agreed upon for this purpose is checked and ensured in accordance with standards utilizing suitable testing measures, such as weld cross-sections from our in-house metallography. In addition, we can quantify and prove all relevant mechanical properties of our joint. The welding tasks here can originate from the entire welding and materials technology spectrum. Whether low-alloy, high-alloy, or high-strength steel or aluminum alloys, FEF Components & Devices implements the task reliably and on schedule. By keeping a wide variety of GMAW and laser processes on hand, the right joining technology will surely be used in thin or thick sheets. Would you like to outsource your welding tasks? We will gladly join for you! The following joining processes are used: fully mechanized arc welding (GMAW, TIG) Beam welding (laser beam welding, electron beam welding) Friction stir welding (FSW), ultrasonic welding, adhesive bonding
    > Go to profile
    Employees
    Year of foundation
    2019
    Certifications
    ISO 9001:2015
    D + M Z��gel GmbH was founded in 1984 in Schiffweiler / Heiligenwald. In 1989, the company relocated to Überherrn / Altforweiler in the industrial street. Since that time our company has grown continuously. Already in the founding year, we became suppliers to the company John Deere, CLAAS and Kuhn. In order to meet customer wishes and requirements, In 1995 our production was extended to 3 halls. In 1996 Rubber Technology became reinsurer of Terex Demag. As a medium-sized company, you will find our products everywhere, where precisely stamped and processed parts made of rubber or PVC for the Industry needed. Through close cooperation with our customers we are able to optimal solutions and dimensionally accurate products - also in economic Respects - to offer. Our expertise, our modern production facility and our high Quality standards guarantee consistent quality and punctuality Delivery of our products. Our quality standard has been decreasing since 2002 DIN ISO 9001: 2008 certified. With our experience and our technology, we are the right competent Partner for your business to meet the challenges of the future to encounter. Our long-standing customers confirm our capabilities grown partnerships.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1984
    Certifications
    ISO 9001:2015
    Looking for a flexible partner to its rotational parts optimally shopping? - We're here for you! We manufacture turned parts from short to long and complex to simple. In the series size, we will gladly comply with your wishes and produce optimally designed machines from small to large series. Also series sizes from 100,000 to 300,000 pcs are easily possible. You do not want to take care of even after treatment or processing? No problem, we will take care of the entire process chain with our long-term partners. Pre-assembly and warehousing are not part of your core competencies? We are happy to offer you this hand. We are the flexible supplier, partners and service providers close to them! Our strengths are flexibility and the will exactly turning and milling parts to offer you need. Through our broad-based production, we can benefit from a wealth of experience and together with our partners we will find you the best solutions in terms of quality and cost.We gladly offer with construction issues hand and work out a solution with you. Turned parts are no longer the same rotational parts! Here is turned, milled, drilled ... ... And this ... in all kinds of materials ... Thanks to our technological standing on the state of the art machinery are highly complex components no problem ... Here ... we can also roll the threads or keyways and hexagon poking provide hand. The dimensions in which we manufacture range from manufactured on the long-turners very small and / or long turning and milling parts to large parts of diameter 200mm. Do you have the same components that you installed (pre-assembled) want to buy? This work we undertake for you. And for treatments such as annealing, hardening, silver / gold plating, zinc plating, nickel plating, etc. We have reliable partners so that we can offer you everything from one source. • MechWorkshop • Fabricator / decolletage • CNC machining • Multi-axis machining and backs processing • small batches from 100 pcs, Grosserien to 300,000 - pcs or more • Processing: from Ø 3mm - 65mm, from rod (length up to Ø 25/700 - 800mm). • food processing: up to 150mm (length 300mm).
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    1996/2022
    Certifications
    ISO 9001:2008
    Here is the future "shaped"! The company Hiebler is since 1985 a versatile full-service provider in the areas of plastics technology, multi-component manufacturing and injection molding as well as in tool and mold making. Development and construction, contract manufacturing, prototypes and small series - the scope of work is comprehensive and forward-looking. Since the company's inception, it has the company Hiebler managed through strict quality guidelines and by a steady expansion to the top of the plastics industry in Austria. Our actions are shaped by our guiding principles, our values ​​and the highest standards of ourselves Multi-component finishing & Let yourself be inspired. Of course we also handle all the work incurred after production yet. Hiebler provides complete service of the highest quality. We do everything together, take care of the packing and realize the pressure.In addition to CNC milling, pad printing (single and mehrfärbig), assembly, labeling, we also offer advanced adhesive technology to provide completely satisfy our clients. Of course, we also offer individual methods for compiling your product: CNC milling, final assembly and packaging according to your requirements. The multi-component production including assembly and assembling work is very time consuming and labor intensive. Therefore, many customers relocate these activities directly to the manufacturer. Plastic Injection Moulding - 20 years experience in 2-component field In order to achieve short-term, customer-specific solutions, we have built a modern and innovative infrastructure. We produce for various industries, where economic development is not parallel, so it is important for us to be able to act flexibly. With over 20 years experience in the two-component injection molding process we use two different plastics at the same time in one tool.The advantage is obvious - can use different materials, different functions, combined in a single component, are met. We realize both hard / hard, and hard / soft combinations with our tools. The possibilities range from molded gaskets to two-component MID components. So we were one of the largest two-component injection molder in Austria. On the way to market-ready product quality requires the latest injection molding machines. We work with 23 injection molding machines of the brands Engel, Demag, Battenfeld and Fanuc. Whereby 21 injection molding machines (40-800 tons) - are mostly equipped with fully automatic handling (injection weight 1g - 3000g). Six two-component injection molding machines (80-200 tons) can be used with a rotary table, index, plates, and conversion methods, as well as two 100-ton electric injection molding machines are also available. The production takes place around the clock (24/3-shift operation) and usually fully automatic.This means for our customers: from order to delivery very short lead times! Mold and tool We offer more than just the shape! As an innovative, experienced company in mold and tool we offer our customers services from all areas of mold construction. Take advantage of our technical capabilities and our capacity for productivity. Hiebler developed your new product idea and advises you when suitable for plastic design and dimensioning of the tools. We rapidly create attractive, production-oriented 3D CAD models. We also support you in the short term in the productio...
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1985
    Certifications
    ISO 9001:2008
    The workshop composite Work allows people a fulfilling life: a own merit, social contacts and mutual exchange, recognition of one's own performance, meaningful employment. Work strengthens the self-esteem. For people with physical, mental and emotional disabilities In the workshops in Steinhöring, on the court and in Fendsbacher Eglharting around 350 people work with physical or mental disabilities. 2008 Ebersberg another workshop was opened specifically for people with mental illnesses. In all four workshops, our employees care very individual to each employee and each dealing: According to the skill set of each and every professional and trained and supervised. All employees have an employee-like status, are covered by social insurance and receive a wage. The workshops meet high quality standards and are certified according to DIN ISO. Depending on location, different work areas to choose from. The products and services of our workshops. We would be delighted if you want to cooperate with us. We discuss the possibilities of cooperation like with you in a personal conversation. We are open to new ideas. The workshop network offers its private and industrial customers a wide range of products and services: Industrial Manufacturing * Mounting * Completion operations * Packaging Metal processing * Individual wage contracts with modern CNC technology
    > Go to profile
    Employees
    Year of foundation
    1971
    Certifications
    ISO 9001:2008

    Watch

    Mevaco SA
    MEVACO being a member of the Athens stock exchange is a leading manufacturing firm which implements state-of-the-art technology in the field of metal fabrication and metal construction, conforming to the principle that total customer satisfaction is of highest priority. When it comes to sheet metal fabrication processes, whether carbon steel, stainless steel or aluminum, MEVACO, having experience in the field for over 40 years strives to be the industry leader. Our customers depend on us to produce high quality and high precision custom products. Our staff of highly trained and engineers and technicians are flexible and highly motivated. Our state-of-the-art metal fabrication equipment and sophisticated manufacturing technologies coupled with an abundant industrial floor space enable us to fabricate almost any type and size of metal product, strictly based on the customers quality and quantity requirements. Mevaco not only invests in fabrication technologies and machinery but firmly believes our success stems from the philosophy of personnel investment. Our self-motivated experienced and energetic staff adjusts to almost any degree of difficulty and can yield desired results within a minimum response time. We make the best use of leading edge computerized hardware and software and our staff is constantly trained and up to date with emerging technologies within the field. We can fabricate to almost any order quantity and to any quality level as desired by the customer. We keep our equipment up-to-date and our staff trained and highly-motivated and content, this we believe is what sets Mevaco as a leader in metal fabrication and metal construction.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1/12/1993
    Certifications
    DIN EN ISO 3834
    Rosco Eko-Tech Sp. z o.o. is an engineering company established on the European market in 2009 as an independent subsidiary of an enterprise operating mostly on the German market, i.e. Rosco Polska Sp. z o. o. since 1994. The main direction of our operations is comprehensive services in the field of supply and installation of steel devices and structures. From the outset of our operation, we work for European customers offering them the best Polish performance verified by the experience of many years. We products of the highest quality acquiring the trust of customers. We especially try to assist with the optimisation of technological processes and implementation of environmental protection solutions.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2009
    Certifications
    DIN EN ISO 3834
    Company overview:
  • Year of establishment: 1998
  • Number of employees: 60
  • Products / diene Teistungen:
  • * Plate constructions of the CAD drawing to the finishing * Series parts for construction equipment * Sorters / Dosierelevatoren * Laser cutting / edging work * Stair and railing
  • Office and Administration:
  • * 5 CAD workstations AutoCAD * 5 Inventor jobs * 2 Programming workplace * Send and receive multiple file formats possible. DXF, DWG, IGES, TIF, JPG, Stp, satellite, ipd, iam........
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1998
    Certifications
    DIN EN ISO 3834
    Over 300 employees, a plant that is designed according to the latest knowledge of process control and material flow, as well as an exceptionally high level of vertical integration in line with well-trained employees ensure that the sum of skills and reliability applies at every point in the process chain. Our high-precision parts serve well-known customers from the following industries: automotive, mobile hydraulics, electrical drives, mechanical engineering, sensors, medical technology
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    1925
    Certifications
    IATF 16949:2016
mehr anzeigen