6427 Suppliers found
List
Raster
Map
Sorted by 
Go to watch list 0

    Watch

    Stormo d.o.o.

    Dear Sirs and Madams, You need a custom-made product or a product according to your ideas, then you are right with us. We weld, engrave and manufacture for you! Thanks to the automation, we are able to guarantee you a fast and high-quality production process. For our clientele we design precise and high quality products. We guarantee good and clean workmanship. Stormo d.o.o. is a company with many years of tradition and experience in assembly, installation and manufacturing in the metal industry. Below we will briefly mention our activities that we offer in metal processing. Our company has been working successfully for several years on the processing of alluminium, inox and iron plates. Whether single piece or mass production, we will meet your needs in any case. Our activities: - Gas & sanitary engineering - Heating & ventilation technology - craft of metal technology for metal and mechanical engineering - electrical installations - welding - All kinds of industrial installations 1. Assembly and disassembly 2. Machine connection and robotization 3. Various work in the auto industry, printing houses and other metal industries 4. Home installations and industrial installations 5. Pipe work and Wig welding in the auto industry and refineries We produce almost all sectors in which iron, stainless steel, inox & aluminum are used and are active in the following areas: 1. LASER Iron plates: up to 20mm Inox: up to 10mm Alu: up to 8mm The maximum dimensions are: 3m x 1.5m 2. CNC MACHINING For the processing of the materials we use a very high quality device of the brand HACO. We offer bends up to 3000mm. The maximum pressure is 135 tons. 3. DRAWING We have in-house designers or draftsmen and we also gladly help you develop new designs. 4. WELDING Our welders weld for our customers TIG, MIG-MAG and REL. 5. POLISH All our products can be extra polished according to the customer's request. We advise and work with you to find the best solution for you and, depending on your needs, we also take care of pre-production and delivery for you. Challenge us!
    > Read more
    Employees
    50 - 100
    Year of foundation
    2017
    Certifications

    Watch

    Bhargav Brass industries

    At Bhargav Brass Industries, we firmly believe in these simple pearls of wisdom. And we have proved it right over and over again. It all began in 1996 and have steadily achieved a consistent growth, and won the confidence of all our clients of National/Inter-National repute approx 48 companies. The range of products is manufactured by making use of high-grade required basic material such as Copper, brass, Stainless Steel and others.This range is being designed thorough effective technology in accordance with the defined parameters of the industry. We, “Bhargav Brass Industries,” are a ISO 9001:2015 certified company engaged in manufacturing, exporting and supplying a wide range of Customized Metal turning Components. Under this range, we offer Brass machined parts, Brass stamping components, Bronze components, copper forged components, aluminium components,steel turned parts and precision milled components. Along with this, Male Barb Nipple, Compression Male Branch Tee, Hose Nipples Fittings, 8 Way Earth Block, compression fittings,Air brake Fittings, Gas fittings, Pipe fittings, industrial fittings, Auto Mobile Parts, Electrical components and many more. Product-gamut which we have made available is manufactured by making use of high-grade basic material such as iron, brass and many others, which is procured from the established vendors of the industry. Designed through effective technology, this range conforms to the defined parameters of the industry. Owing to its precision production this assortment posses significant attributes such as longer service life, efficiency, resistance against corrosion and fine-finish. These are attributes which make our products capable enough to meet applications of plumbing and others. We offer this range in different sizes and designs to satisfy divergent demand of the clients. We are a client-concentric organization and being so, We endeavor to fulfill our commitment of providing the best range of products. That’s why we have recruited such professionals who hold expertise and years of experience in this discipline. Our team members are too qualified to develop products in complete adherence with defined parameters of the industry and clients’ requirements employing latest technology installed at our production unit. Furthermore, we make commitment to service our clients with the transparent and ethical business policies. With our fair approaches we have been able to surpass expectations of significant names active across the nation. We exports our products in East Europe, South/West Europe, Australia/NZ, East Asia, and all Indian Subcontinent. "A Customer is the Most Important Visitor on Our Premises, He is not dependent on us, We are dependent on Him, He is not interruption on our work, He is the purpose of work, He is not an Outsider on our Business, He is Part of Business, We are not doing him favor by serving him,He is doing us a favor by giving us an Opportunity to do So."
    > Read more
    Employees
    50 - 100
    Year of foundation
    1996
    Certifications
    ISO 9001:2008

    Watch

    Ingenieurbüro Arne Laugwitz

    Engineering and consultancy for design of castings prototypes, low volume production and mass production of aluminum castings prototypes and single pieces from aluminum, cast iron, high alloyed iron and steel cooperation for mass production of aluminum castings from China 18 years of expirience from automotive, industrial products and aerospace components expirience in architectural castings and arts
    > Read more
    Employees
    Year of foundation
    2014
    Certifications
    ISO 9001:2008

    Watch

    Prom Nord GmbH

    We are a German company with production in Slovenia. We customize lathes and milling parts consist of different materials and refine the requirement their surfaces.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2016
    Certifications
    ISO 9001:2015
    TP Suche Banner

    Watch

    Plastic Werk Kappich

    Since 1945, the name Kappich - as a family business in its third generation - for individual products of the highest quality. Are manufactured injection molded plastic parts from all thermoplastics and plasticized PVC, which the electronics and find eg in medical technology, the automotive industry. Modern injection molding machines produce in a clamping force range 15-200 t Plastic parts of 0,5 g - 360 g This robotic systems for optimal production processes and consistently high quality care. Additional services include metal inserts, heat embedding of M3 and M4 threaded bushes, printing of plastic parts in the pad printing process. In mold less extensive tasks can be implemented in a timely manner internally. For more complex issues we draw on proven partnerships in order to obtain best results and rational solutions.
    > Read more
    Employees
    5 - 10
    Year of foundation
    1945
    Certifications
    ISO 9001:2015

    Watch

    Wagner Sondermaschinenbau

    Special machine for Wagner: Everything does not exist! We live innovation and look forward each time on new challenges! Whether targeted conversion of trucks, whether trailers, industrial plant or special solutions for your needs - Wagner Special machine puts your desires to professionally! Mechanics, hydraulics, electronics - we have the professionals at work We analyze the present problems and develop inter-plant solutions! In Wagner the planning and implementation of electronic, hydraulic and mechanical components are. So that we can surprise you with our solutions. Over and over again. Produced entirely in Germany We guarantee our machines! For that reason, we never use on purchases from abroad. We build your products completely in our own workshop. Whether special size or special solution - where it says Wagner Wagner is also in there. And only Wagner!
    > Read more
    Employees
    Year of foundation
    Certifications

    Watch

    ISITEC Anlagen- und Messtechnik GmbH

    We offer solutions from a single source: - Mechanical engineering - Manual, pneumatic and hydraulic clamping devices - Assembly equipment and devices - Testing systems for geometry, tightness, flow - CAD design (Autodesk Inventor and WSCAD) - Control technology (Siemens Simatic and others) - Item production
    > Read more
    Employees
    10 - 20
    Year of foundation
    2005
    Certifications
    ISO 9001:2015

    Watch

    CMS Componenten Matrijzen Stempels BV

    Manufacturer of medium size series milling share.
    > Read more
    Employees
    5 - 10
    Year of foundation
    2018
    Certifications

    Watch

    STW-Engler

    Construction, welding and finishing.
    > Read more
    Employees
    < 5
    Year of foundation
    2013
    Certifications

    Watch

    Hohenloher Präzisionsteile GmbH

    In 1982, Peter Sedlak, the CNC machining technology with an employee and three machines in Schwäbisch Hall. Were produced turned parts in small and medium-sized batches. Over the next few years, additional machines were added. The number of employees rose steadily. An increased demand for pre-finished parts made the first purchase of a conventional milling machine and a CNC machining center later inevitable. So it was always close in the rented hall and the desire to own a larger hall and getting stronger. In December 1991, finally, the company moved to Untermünkheim-Enslingen so that in January 1992, production could be included in the new hall. The economic downturn slowed in subsequent years, the growth of the company. But it soon went up again. Until 2000, all machines were replaced with new, more modern. In 2000, the certification according to DIN EN ISO 9002 was carried out. As of January 2002, the company operates under a new name. Peter Sedlak and his longtime collaborator and master Friedrich Schiele founded the Hohenlohe precision parts GmbH. Today, 12 employees produce pre-finished parts and assemblies for many satisfied customers from different industries. Various grinding work, as well as heat and surface treatments we have them implemented by competent and reliable partners. The reward for good quality and very little complaints are our satisfied customers.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1982
    Certifications
    ISO 9001:2015

    Watch

    WIERZ GmbH & Co. KG

    > Read more
    Employees
    10 - 20
    Year of foundation
    Certifications
    ISO 9001:2015

    Watch

    ms-Blechtechnologie Vertriebsgesell...

    We are a small, flexible company that through the special achievements in:
  • Laser Technology
  • Sheet Metal and Processing (round, edge, drill, ...)
  • Welding
  • successfully takes off in the marketplace. Satisfied customers are our best reference! Our location in southern Germany, just off the A7 motorway (Würzburg-Ulm) guarantees the best transport connections in a central location in the heart of the Swabian Alb. Our working style is characterized by quality consciousness, customer orientation and team spirit. The use of modern technology enables the highest product quality, precision and reliability. Technical know-how and qualified personnel create standards for the future. The high level of automation of our company ensures our clients efficient and on-time production in small and medium series.The material will be processed by us steel, stainless steel, aluminum and most diverse special materials. The production inspection and measurement guarantees a consistently high quality of our services. Benefit from our know-how. Get to know our diverse manufacturing capabilities in more detail and use our strengths to improve your competitiveness:
  • short lead times and dates
  • great flexibility
  • optimum quality of the products
  • favorable prices through high productivity
  • competent contact persons for each task.
  • Products Laser Technology: Mild to 25.0 mm material thickness Stainless steel: up to 20.0 mm material thickness Aluminum: up to 12.0 mm material thickness Sheet size: up to 1500 x 3000mm Of course, we can continue to edit each laser part, whether square or round. For details, see the section assemblies. Assemblies: from laser cutting to the deformation (edges and round) to complete welded assemblies including the desired surface, we offer complete solutions. Of course, we also take during production tasks such as development, design, product approvals and logistics. Welded assemblies: Whether sophisticated machine covers, complicated or container frame structures - our certified welding personnel ensures proper execution of your welding jobs. All welding work - whether butt welds or fillet welds are carried out according to relevant, or the standards demanded by our customers. Weld testing such as X, dye penetrant, etc are supplied according to requirements. Products for plant construction and process engineering: Tanks, cyclones, hoppers, tanks, compressed air tanks andsw Products for plant construction and process engineering: Pipes, elbows, branches, transition pieces, special parts, butterfly valves, gate valves, air flow regulators, diverters etc, We look forward to meeting you!
    > Read more
    Employees
    50 - 100
    Year of foundation
    2004
    Certifications
    DIN EN 1090

    Watch

    WS - Service KG

    The focus of business activities located in various services related to the development and production of the plastics processing industry. The priorities are • Development • Engineering • Production • Tool Within these fields of activity, the company focuses on the multi-component technology in conjunction with the TSG - method (thermoplastic foam casting) and the development and delivery of plastic parts in combination with electrical, electronic, sensory and mechanical components. Materials The company has the following special materials processing and application - know how: • Thermally conductive plastics • Electrically conductive plastics • carbon fiber reinforced plastics • heavy plastics (harder than steel) • Thermoplastic Elastomers • Bio - plastics Article The company develops and produces plastic float for different applications with the following properties: • Various external contours and volume models up to 5 kg • density of 0.4 kg / dm ³ upwards • Pressure up to 80 bar • KTW and W270 approval
    > Read more
    Employees
    10 - 20
    Year of foundation
    2003
    Certifications
    ISO 9001:2008

    Watch

    Anlauff GmbH

    CNC precision turned parts of the precision experts! For over 40 years, designs and manufactures the Anlauff GmbH Precision turned parts and assemblies in a variety of materials such as steel, stainless steel, aluminum, brass, bronze and even plastic. A detailed list of materials is listed below. Our many years of experience as a top supplier of reputable companies that specific industry knowledge, eg in the automotive, hydraulic engineering, electrical engineering and hardware technology for maximum quality and maximum efficiency. We produce at the site Zimmern ob Rottweil (Baden-Württemberg) CNC machining parts according to your drawings and support you in the realization of individual rotating parts and assemblies. As sample parts in small batches from 1000 pieces and high-volume to 100,000 piece we produce fast, flexible and on time. Furthermore, we also offer an extensive parts service as Heat treatments ***: *** - Case hardening, annealing, induction hardening - Tenifer, tempering, hardening and tempering Surface finishes ***: *** - Zinc (Blue, Yellow, Olive, Black), thick-film passivation (Cr-VI-free) - Zinc / nickel, zinc / iron andvm - Tin plating, nickel plating, copper plating, hard chrome plating - Anodizing, phosphating, bronzing Finishes ***: *** - Milling, deep hole drilling, thread rolling, broaching, honing, bending, marking - Vibratory finishing, polishing, deburring, washing, inner and outer loops Processed materials: - 11SMnPb30 1.0718, 1.0715 11SMn30, - C15PB 1.0403, 1.0401 C15 - 100Cr6 1.3505 - 16MnCrS5 1.7139 - 42CrMoS4 1.7227 - ETG88, ESP65 - POM - MS58 CuZn39Pb3 2.0401 - CuSn12 2.1052 - Gunmetal CuSn7ZnPb 2.1090 - AlCuBiPb, AlCu6BiPb 2011 3.1655 - AlCuMgPb, AlCu4PbMgMn 2007 3.1645 - AlMgSiPb 6012 3.0615 - AlZn5Mg3Cu AlZnMgCu0, 5 7022 3.4345 - AlMgSiMnBiPb 6026 - AlMg4, 5Mn0, 7 3.3547 5083 - AlUn5, 5MgCu AlZnMgCu1, 5 7075 3.4365 - AIMgSi AlMgSi0, 5 6060 3.3206 - AlSi1MgMn AlMgSi1 3.2315 - Stainless steel 1.4305, 1.4301, 1.4021,
    > Read more
    Employees
    10 - 20
    Year of foundation
    1969
    Certifications
    ISO 9001:2015

    Watch

    Magdalene Meyer GmbH

    Our company was founded on 02.05.1960 as a toolmaking company. In 1978, the production of stamped parts was recorded. We work up to 70% for the automotive industry. Our tools are manufactured in our own tool itself. There are punching machines of 25 tons. up to 250 t. available. We use aluminum and stainless steel band, both bare and galvanized, up to a width of 500 mm and thickness of 4 mm. We are manufacturer of stamped and formed cold formable from all materials up to a thickness of 5mm. The tools, fixtures and special machines required for production can be manufactured in our modern tooling itself. It composite tools have already been made up to a size of 1600 x 900 mm. In addition, is also imported wage work in the field of wire erosion. The preparation of 4-axis wire EDM programs is possible in our home. For the production of stamped and formed parts are available to us in addition to various stamping presses Eccentric presses from 25 to 250 to pressure force. It will all be cold-processed materials up to a width of 500 mm and a thickness of 3.5 mm. The introduction of pierce nuts in the progressive die is possible. Feeding for punching pin punch and nuts is available. The necessary tools can be produced in our own tool.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1960
    Certifications
    ISO 9001:2015
    TP Suche Banner

    Watch

    Trautwein Präzisionsdrehteile GmbH

    For more than 50 Years our company has been experienced in high precision manufacturing of turning work pieces. Due to the availability of always the very latest CNC turning machines and CNC turning centres with up to 32-axis processing devices, we are able to produce complete very complex work pieces in small, middle and large production lots. With the current equipment we process round bars in diameter size from 3 up to 65 Millimetre as well as chuck pieces up to 200 Millimetre in mainly nonferrous metals especially in all kind of brass. The combination of the latest machining technology, decade-long experience as well as outstanding knowledge and know-how guaranty our customers an extremely high quality based on a maximum of flexibility nowadays. The accredited Quality System according to DIN EN ISO 9001:2000 has been understood as basic standard. Thereby we offer our service and comprehensive consultation for an ideal fabrication of turning and machining parts from the early stage of development and designing already. Last but not least we provide our customers and ourselves the guarantee of a sustainable and successful co-operation due to an outstanding competent team of specialists. Our core competences are in fittings, valves and controls engineering, mechanical engineering, electrical engineering, medical engineering, industrial art, aerospace industry, modelling industry and instrumentation. OUR KNOW-HOW - YOUR BENEFIT * Superior Price-/Performance-Ratio = standard * Highest precision is naturally with us * Absolutely reliable and on shedule * Highest productivity through decade-long experience and know-how * Development/Optimisation of products and parts for high efficient serial production Produktion * Short turning parts * Long turning parts * Inserts * Designer turning parts * Small-, medium- and large series * O- and sampling parts manufacturing * Component assembllies * Surface treatment and special finishes
    > Read more
    Employees
    20 - 50
    Year of foundation
    1964
    Certifications
    ISO 9001:2008

    Watch

    Wilh. Pfleiderer GmbH & Co. KG

    Over 100 years ago William Pfleiderer founded his metal goods factory in Esslingen am Neckar. Today, in the third and fourth generation, the family supplies customers in the European and East Asian region. Its customers include all branches of industry which use formed without cutting sheet metal components in their products (power tools industry, automobile industry, mechanical engineering). Here the requirements vary from simple to complex stamping assembly. Through our years of experience we are able to meet any customer requirements. We support you in the production-oriented design of drawing, stamping, bending and progressive parts and welding and assembly units and recommend the appropriate starting material. Difficult geometries, manufacturing and assembly groups, small batches, batch sizes with millions of units, tight deadlines, just-in-time, Kanban, safety stocks, are a problem for many others. For Wilh. Pfleiderer means that the orientation of the diverse customer needs.With dedicated employees, particularly flexible production organization and advanced punching and forming, we are prepared for a variety of tasks. Drawing, pressing and stamping parts After drawing, sample or individual information we produce stamped and formed parts of metal (eg steel DC01, DC03, DC04, St, stainless steel 1.4301, 1.4310, 1.4404. 1.4571, brass CuZn, Ms63 copper, aluminum AIMg3, Al 99.5 ) including the complete sequence processing (scrubbing, barrel finishing, grinding) and treatment (hardening, tempering, coating, galvanizing, painting) in the lot size you want. The result is simple washers and brackets to highly precise shifting parts, moldings to the automotive industry and mechanical engineering, complex series of composite parts, cylindrical drawn parts, housing and much more. Assemblies We are the perfect contact for sophisticated assembly and / or installation work. You order a completely manufactured and tested component with only one contact.We manufacture the items, take over the logistics of procuring needed to buy or standard parts and assemble the whole thing. Benefit from our decades of experience in the field of welding and assembly units such as in protective and hoods for the power tools industry. In this field, we manufacture and assemble a wide variety of sizes and designs for many well-known manufacturers. We can do this rely on our large inventory of own drawing tools, cutting tools, jigs, etc., saving you huge costs.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1904
    Certifications
    ISO 9001:2015

    Watch

    MÄDEL-METALL

    The company lass-metal is an innovative, family-run business in Thuringia with decades of experience in the field of sheet metal processing. Our core competencies are cutting, stamping and bending with corresponding progressive dies, Einlegwerkzeugen and devices. With our corporate sectors of stamping, tooling and logistics we cover the entire process chain from product development to delivery of the finished stampings off automatically. We have stamping machines and eccentric presses with a tonnage of 4t to 630t. Hydraulic presses up to 160t bring our products in the form. We work according to requirements with plate from coil or from the board. But inlays complete our staff quickly and flexibly. Whether stainless steel, rolled sheets, copper or aluminum, coated or bare: We fulfill the requirements of our customers. Additional work such as washing the parts, heat or surface treatment, we cover with our reliable partners, of course, also decreases. Our house tool handles not only maintenance and repair of equipment and the construction of tools. In modern CNC machines here arise the active parts that are previously constructed in our CAD workstations. We work throughout with SolidWorks and are capable of customers common 3D formats to process. If you ship the goods, we can draw on our own fleet. A big advantage for us and our customers in a timely and, if required just-in-time to deliver. Neustadt (Orla) is Hermsdorfer Cross (A9/A4), the Leipzig / Halle airport is just an hour's drive-hour away. With 60 employees, we are suppliers of renowned national and international companies in the fields of automotive, household appliances, furniture, electrical and mechanical engineering industries. In particular, to expand the product range and the long-term quality assurance innovation be promoted in the company steadily.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1988
    Certifications
    ISO 9001:2008

    Watch

    Sterr & Eder Industrieservice GmbH

    As an industrial service provider, we have been working for light metal foundries for 35 years in postmolding operations i.e. Surface processes such as shotblasting, deburring, heat treatment, NDT processes, sealing or impregnation of porous castings and now also CNC machining successfully In addition, we offer our customers Final inspection,packaging and storage with direct delivery of end customers and OEM locations We are certified according to ISO9001, IATF 16949 We are since many years a reliable partner in terms of quality and delivery reliability in a convenient location in southern Germany directly in Landshut Nord on the A92 / B15 motorway
    > Read more
    Employees
    20 - 50
    Year of foundation
    1987
    Certifications
    IATF 16949:2016

    Watch

    JAGDAMBAY FORGINGS

    Company description COMPANY INTRODUCTION Our Founder Mr. Sunil Kumar Garg Started the company in 1995. Since than we are engaged in forgings of auto parts, tractor parts, agriculture parts, gears blanks and truck parts as per specification of our client around the globe. We have complete machinery in house including tool room for making dies and fixtures. we are ISO 9001:2015 Certified film from TUV. We currently use steel like 20mncr5,16mncr5, SAE4140, SAE8620, SAE1020, mild steel, SAE1045, ST52.3, Low carbon, EN8D, EN9, EN18, EN19, EN24 ETC in forging depending upon the requirement of client and application of forged part. Along with the forging we have complete in house facility for CNC turning, VMC machining, Broaching, Grinding, MIG Welding, Induction hardening and heat treatment of the component if required by the client. Current Turnover is 18.50 Crores Annual. Approx Total Area = 25000 Square Feet. Plant is located is Government Approved Industrial area and Continuous Power Supply and also backed up with power Genset for emergency Situation. Our Strengths Experienced and Technical Production and Quality Assurance Team. 100% Equipped with CAD-CAMs. In House Die and fixture Manufacturing facility. Quality Policy Jagdambay Forgings is committed to manufacture and supply quality products to meet customer’s requirements. Quality Objectives To enhance employee competence, awareness of systems through training. Provide high quality forging and machine components to our customers. Strive to continually improve internal efficiency, product quality and customer satisfaction. To have safe working environment. We are registered under ESI, Provident Fund, Factory Act and MSME. Vivek Garg Mobile 00 91 98155 44161 Jagdambay Forgings, An ISO 9001:2015 Works and Office:- Industrial Area C Dhandari Kalan, Ludhiana-141010. (Punjab) INDIA. Website: www.jagdambayforgings.co.in E-Mail: info@jagdambayforgings.co.in exports@jagdambayforgings.co.in ============================ An Iso 9001:2015 Cerified (Tuv) DUNS Certified Firm.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1995
    Certifications
    ISO 9001:2008

    Watch

    Kunststoff-Technik GmbH

    The Plastics Technology GmbH Dresden is producing machine parts and assemblies according to your drawing specifications from ALL commercial plastics such as POM PA6 PE1000 PEEK PAI Makrolon acrylic and fiberglass reinforced plastics. Also, a production of hoods, doors, protectors made of Makrolon / acrylic is possible with us. Our cutting service allows you a quick availability of their specified dimensions for blanks of semi-finished plastics. We also offer thermal processing, gluing, welding, surface treatment of plastic parts, including teeth and sealing technology. Our Customers can be found in the fields of packaging machinery, medical technology, various transport companies, cleanroom technology.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1991
    Certifications
    ISO 9001:2015

    Watch

    Lauble GmbH Präzisions-Drehteile

    see our Web site at: www.lauble-drehteile.de
    > Read more
    Employees
    20 - 50
    Year of foundation
    1965
    Certifications
    ISO 9001:2015

    Watch

    DECRON d.o.o

    We are a young company from Croatia, who is ready to take orders and sowol qualitative as well as scheduled, High precision to produce parts. Look forward to any constructive cooperation. So far we have exclusively commissioned as a supplier for a Mitelstaendischen operating in Deutchland gefertigt.Fraes parts and machining parts, surface grinding with surface treatments, and Montegearbeiten.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2014
    Certifications
    ISO 9001:2015

    Watch

    turningtec GmbH

    WEBOTECH is a manufacturer of precision turned parts with nearly 100 years of experience in the market. As one of the first manufacturers of turned parts worldwide we are certified according to ISO TS 16949. Our expertise in machining, so the quality of our employees and our machinery, you can safely assume. For our references and the development of speaking, particularly in recent years. In the procurement of turned parts reliability is one of the most important criteria. It meets us again and again with pride when we classify renowned companies from all over Europe as preferential or A-supplier. We at Webotech have the know-how for even the trickiest cutting task. We have the experts in the essential processing techniques. We are constantly with our machinery to the prior art. We work with future-oriented forms of organization. Why Choose Us: - Pooling of expertise, manpower and equipment from various fields - Continue to bring design departments and value analysis teams with new ideas - Complete production program from the standard part according to your documents by developed together with you special section for extreme operating conditions - Complete in-house production of components - High investment in premises, machinery, automation, internal training and development - Modern management structures Billions of turned parts from our company have found their way into almost every industry. This speaks to our experience. This speaks for the quality of our products.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1923
    Certifications
    IATF 16949:2016

    Watch

    Schüco International KG

    For over 50 years, Schüco Alu Competence has been working with the material aluminum. The experience provides the secure basis for dealing with the high-quality material. With a continuous view into the future and consistent investment in know-how and technology, Schüco Alu Competence guarantees a full service and the latest state of the art at all levels. With the competence in the aluminum processing we set standards: our technologies form the basis for Customer developments made of aluminum for all branches of industry. Depending on the requirements, individual profile machining and system solutions are developed and manufactured for a wide range of different industrial customers and also industrial designers.
    > Read more
    Employees
    200 - 500
    Year of foundation
    1964
    Certifications
    ISO 9001:2015

    Watch

    KeyTec Netherlands B.V.

    KeyTec is an ambitious, global supplier of metal, plastic and combined metal/plastic high-precision components and assemblies. Originally formed in 1980, the company was divested from Philips Electronics N.V. in 1999. Flexibility, speed and customer focus are key assets that we use on our journey to becoming the preferred supplier of electro-mechanical components. This is our promise to our customers. We provide High Precision Metal and Plastic Components & Mechatronic Manufacturing Solutions (MMS) in selected application areas. Within these application areas we are a successful developer and producer of modules and products for companies with a focus on technology innovation. Our USP's are automotive quality, paired with flexibility, in house engineering and provider of quick affordable tooling. Our Production Technologies are: * cutting * Deepdrawing * Injection moulding * Insert Moulding * Reel to reel injection moulding * Assembly (electrical and mechanical) * Surface treatment * Laserwelding * Soldering * Ultrasonic welding * clean to line deliveries for cleanroom operations We focus on automotive and medical markets and further produce for customers in Precision engineering, Mechatronics, Optical industry Vacuum technology and glass to metal sealing Advanced Materials We have a broad experience in the use and application of less standard materials and exotic alloys. We perform deep drawing, stamping, laser welding and turning on metals and alloys like: Kovar or Fernico, Titanium,Oxygen free Copper, pure Nickel, Molybdenum, and Nitinol
    > Read more
    Employees
    50 - 100
    Year of foundation
    Certifications
    ISO-TS 16949:2

    Watch

    Matthias Wetzel Industriebeschriftu...

    Surfaces with system The Matthias Wetzel Industriebeschriftungen GmbH stands for the treatment, processing and labeling of surfaces. She has mastered technologies such as laser marking, engraving and mechanical parts, screen and pad printing, powder coating and painting as well as precision finishing, drag finishing and processing. Both the printing of round surfaces especially of optical components and surfaces of tools, trim panels, front panels, labels, watches trays, implants, scales, mechanical parts and complete assemblies can be coated and grafted. We are certified according to DIN EN ISO 9001, DIN EN ISO 14001 and OHSAS 18001 for laser-etched labels we are CSA approved supplier for the North American market.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1999
    Certifications
    ISO 9001:2008

    Watch

    Melchers Techimport GmbH

    C. Melchers & Co. was established on January 1, 1806 in Bremen, where the global company still maintains its headquarters to this very day. In the first few decades of the company’s history, over 30 ships sailed the oceans of the world under the Melchers flag, linking the ports of Europe, America and the Pacific. In the 1860s, C. Melchers & Co set up operations in Asia, where all its trading interests swiftly moved. At the same time, with the onset of steam ships, it abandoned its own shipping business to devote itself entirely to extending its trading operations. 1866 saw the establishment of the first branch in Hong Kong, in the wake of which China began to develop into a key lynchpin for the company’s business. The ensuing decades were a period of rapid growth for Melchers in China, with over 2,000 people employed at 12 branches and plants throughout the country. The First World War proved to be a setback for business relations, although business quickly recovered. It was not until the end of the Second World War in 1945 that business came to an almost complete halt. Even so, the company continued to survive, re-opening its first branches in Hong Kong, Singapore and Kuala Lumpur in the early fifties and gradually extending its branch network across Asia. Following the opening of the Chinese markets at the end of the seventies, Melchers set up branches here again, underscoring the significance of Chinese business for the company. With the establishment of a branch in San Francisco in the early eighties, the company also started to engage in US-Asian trade so as to gain a share of the rapidly growing trading relations between these two regions. Trade with China remains a key focus of the company’s overall business, comprising as it does imports of special natural products and finished goods on the one hand and exports of plant, machinery and supplies for the Asian industry on the other. Yet, business with South East Asia has since also come to the fore, with the company amassing broad-based expertise in marketing and selling consumer goods in particular. There are special departments for each article group in Bremen as well as at the foreign branches. They work largely independently within the overall company and are staffed by highly qualified experts. Over 1,000 employees in Germany and abroad assist customers and suppliers with their specialist knowledge. Rather than being based at the company’s headquarters, most of these employees are now stationed at subsidiaries, something which in turn reflects the company’s further development and the strategic alliances which it has forged.
    > Read more
    Employees
    > 1000
    Year of foundation
    1806
    Certifications
    DIN 18800-7:20

    Watch

    Martema UAB

    Martema UAB manufactures components for machine building industry. Our products: pins, axles, bushings, rollers, flanges, fittings and other parts; Manufacturing direction: small (from 10 pcs) to medium size series. Manufacturing processes: turning, milling, welding, hardening, surface coating, billets sawing. Design: we do desing and draw components, assemblies and later run manufacturing. Markets. working with domestic customers but majority of production is exported - Scandinavia, Germany, UK, USA. . Goals: quality manufacturing and reach agreed terms.
    > Read more
    Employees
    < 5
    Year of foundation
    2004
    Certifications

    Watch

    Riverplast S.r.l.

    Riverplast means by "Subcontracting" a complete service, including consulting and co-operation with the customer. This is the reason why we put our pluriannual experience in plastic moulding at our customers' disposal, which means that we do not offer the mere plastic molding, but much more, i.e.: we suggest you the most proper type of material for your specifical needs; we analyse your product for you, in order to find the best material and solution to improve it and to get it cheaper; we design and manufacture the necessary equipment and molds; we mold, assemble and pack every possible plastic part, even with metal inserts; as many plastic components after the molding have to be wired, we cut to length, seam and insert the required cables. Thanks to our plant in Bacau-Romania, with more than 100 people, we can offer very cheap and highly reliable assembling works. In 2017 we bought the company Telcavi S.r.l., and produce now also a wide range of circular connectors for industrial applications: M8, M12, panel mount connectors, distribution box, valve connectors DIN 43650.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1987
    Certifications
    ISO 9001:2008
    TP Suche Banner