3614 Suppliers found
List
Raster
Map
Sorted by 

    Watch

    Beutter Präzisions-Komponenten GmbH...

    Your expert for complicated components and very critical applicationsBeutter is a supplier of fine mechanical components with a high production depth in small batch series. • Beutter was founded in 1909, and is located in Baden-Württemberg, very close to the A81 motorway, 60km south of Stuttgart. • We have about 125 employees. Of our production staff, over 90 % are skilled workers. • We have the capability to perform, in-house, all machining processes (turning, milling, grinding, honing), while for special processes and surface and heat treatment processes we use competent third-party suppliers. • For us, the ideal is small- to medium-sized production runs with a lot size of between 20 and 1,000 pieces. • Beutter is particularly capable within the manufacturing of components with close production tolerances. • We process all machinable materials, and are particularly experienced in processing high-alloyed steels (stainless steel, V2A, V4A, 1.4441, 17-4PH), titanium and special materials (inconel, hasteloy, Ni-base alloy, chromium molybdenum steel, tantalum, platinum-iridium, PEEK). • Our main fields of activity are: Medical technology, aeronautics, hydraulics, military engineering, mechanical engineering and measuring equipment technology. • Our quality management system is certified according to DIN EN ISO 9001:2008, DIN EN 13485 (medical products) and DIN EN ISO 9100 (aeronautics). • We can process your data via our CAD system “SolidWorks“.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1909
    Certifications
    ISO 9001:2015

    Watch

    Anant GmbH

    The Anant GmbH is a marketing subsidiary for own products & representation for few well-selected Indian manufacturing units. We have a good knowledge + experience for quality systems & supervised manufacturing outsourcing from India. Our German representation offers a potential to take up a responsibility to supply the article as door delivered & being your contact/contract partner. whereas our Indian technical team offers possibly of economical in-house manufacturing as well as local outsourcing under our supervision & our own quality control. At Patel Technomation - India, We have the experience and capability of sub-contract CNC machining including supply/procuring of foundry and forging products in small batches as well in large quantity. We follow the TÜV SÜD ISO 9001-2000 quality system and are dedicated to providing excellent customer service, and the timely delivery of quality products. Our Manufacturing unit is located at major Auto-parts manufacturing, Casting, Forging & engineering hub in India; which offers us a good development possibility for any specific/special part manufacturing possibility in a most economical manner.
    > Read more
    Employees
    200 - 500
    Year of foundation
    2006
    Certifications
    ISO 9001:2015

    Watch

    Gröbmer GmbH

    The ... Vielfätigkeit of mechanical engineering. For 35 years, our company has been working in the engineering industry. Always the goal in mind, independent and flexible manufacture our workpieces and to expand our product range, we manufacture to the highest quality standards and precision. With a modern and versatile machinery, we offer our customers experience and commitment in the development and production of their mission. Our handicraft business with about 20 employees specializing in the manufacture of parts, components and assemblies; manufacture both single and serial production are possible. We process a wide variety of metals and plastics - from 3D - CAD - design to the finished product. We design and manufacture - take your product ready for installation in reception, thus saving costs and time. As an experienced Hertseller of turned and milled parts in machinery and mold with a variety of materials, we guarantee quality, precision and flexibility. With CNC machines from renowned manufacturers in the field of machining, we produce from prototype to series production of technically demanding parts with consistent quality in 2D and 3D. Our modern CNC lathes are equipped with automatic bar feeder, driven tools, Y-axis and sub-spindle, so they allow the individual and series production of complex parts in a single pass. New in our machine park is a 5 - axis "Millturn" machining center with which we completely finished workpieces in one set-up, which leads to a significant reduction of the idle times and the precision significantly increases. With corresponding 5 - a pallet exchange system and a total of 90 tool places, we are well prepared for series production. - CNC Milling - 3-D mold - Vermessarbeiten and quality control
    > Read more
    Employees
    5 - 10
    Year of foundation
    1978
    Certifications

    Watch

    Ningbo Yinzhou Gain Machinery Co.,Ltd

    Our booth No. is 14A34-03 for the 14th International Foundry Trade Fair with Technical Forum to be held from June 25-29, 2019 in Duesseldorf, Germany. Welcome!! Unser Stand Nr. 14A34-03 für die 14. Internationale Gießereimesse mit Technischem Forum findet vom 25. bis 29. Juni 2019 in Düsseldorf statt. Herzlich willkommen!! Ningbo Yinzhou Gain Machinery Co., Ltd., is a manufacturing enterprise focusing on design, development & production of one-stop service. Mainly engaged in high-precision OEM parts production. Gain Machinery Specializes in the production of stainless steel 304, 316L, duplex stainless steel 2205, stainless iron, alloy copper, aluminum, alloy steel and other materials. The product diameter is 0.5mm-500mm, tolerance can reach 0.005mm, Surface texture can reach 0.02μ. We passed ISO9001 / TS16949 quality management system certification. The Products cover auto parts, medical treatment, aerospace, electronics and other fields, exported to Japan, Israel & other Asian countries and Germany, the United States, Canada & other European and American countries.
    > Read more
    Employees
    100 - 200
    Year of foundation
    2005
    Certifications
    IATF 16949:2016

    Watch

    Trico AG

    The TRICO AG - A small business, which is characterized by quality and flexibility. For Präzisionsdrehteile of all kinds, the TRICO AG is the right partner. We process various materials of up to Ø1.0mm Ø34.0mm.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1984
    Certifications
    ISO 9001:2015

    Watch

    Rimec Group srl

    WE INFORM YOU THAT RIMEC GROUP WILL BE CLOSED FOR SUMMER VACATION FROM 09 TILL 22 AUGUST INCLUDED. Rimec Group is a company that manufactures mechanical components for a variety of industrial sectors. We have been investing for years both in technological research processes and in the development of leading-edge solutions for the mechanical products machined in our workshops. We have specialised in the construction of shafts and worm gears for winches and reduction gearboxes, link and pivot pins for lifting systems, adjustable stretchers and anchor fittings for fleyer chains, track rollers and sprockets for construction equipment undercarriages, and Twist locks, which are safety components for the handling of containers. We hold UNI EN ISO 9001-2015 and UNI EN ISO 14001:2015. The Rimec Group corporate structure is able to handle all phases of the order, starting from purchase of the raw material through to delivery of the finished product, which can also be assembled in our contract assembly division to the customer’s specifications. All processing steps, from issue of the order to shipment of the finished product, are handled by a computerised bar-code system. Apart from its in-house machining and other processes, Rimec is able to draw on its know-how and a dense network of partner firms inside and outside the group to deliver special heat and surface treatments, such as Case hardening, Induction hardening, Ferritic nitrocarburising, Galvanisation Painting, Chemical nickel plating, Chromium plating and Phosphating
    > Read more
    Employees
    20 - 50
    Year of foundation
    2003
    Certifications
    ISO 9001:2015

    Watch

    LOMAN s.r.o.

    We are a modern family enterprise. We are the producer of high quality serial and piece components for engineering industry, mainly specialized in manufacturing and delivery CNC machined parts, welded parts and machined castings. We produce according to customers technical documentation.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2002
    Certifications
    ISO 9001:2015

    Watch

    ANOK PRECISION MANUFACTURING (SHENZ...

    Anok is a professional manufacturer in China , specialized in precision machined part, mold making and plastic products production. 1). Precision parts: turning,milling, grinding, CNC ,EDM, est. The tolerance can reach in 0.002mm. 2). Mould includes: Injection Moulds + die casting mould +IMD mould+ Blowing mould + Rubber mould + Mould Inserts 3). Plastic products includes Medical / Electronical equipment, Automotive parts , household appliances,Telecom devices, General usage. Pls refer to www.anok-precision.com for detailed products pictures. Anok is ISO certificated factory. Many European and North American customers choose Anok after their quality audit in China, for our vertically integrity new facilities,satisfying quality, best price and most cooperative service. Here you could get some our technology sharing fromour Facebook link below: https://www.facebook.com/anokmould We commit on a "3P" principle: "professional“: our experience stretches over decades , giving you more expertise and effective, feasible technical support for your project in mold and machining field to push it towards. ”precision": we offer a strict approach in customers' project measurement and ensure the result applying to their tolerance requirement. The thinnest steel part we made is 0.6mm,plastic part is 0.15mm. the tight tolerance we reached is 0.002mm . “progressive" : we always keep "updating" both facility and ability, finding and producing solutions compared to that what we received. Any questions or enquires, contact our staffs freely .
    > Read more

    Watch

    Goodwill Precision Machinery (Germa...

    Goodwill Precision Machinery Co.,Ltd (GPM),is a China manufacture established in 2004, Specialized in offering precision machining service for non-standard mechanical parts, spare parts, metal fabrication, precision welding, design & assembly, fixture and jigs with supplied drawings, prototype,CNC precision machining,customed machining parts...... Manage our company with ISO9001:2008 , TS16949 ,ISO13485 .ISO14001 certificated, customized ERP & Barcode Scan System. Our advantages: Easy to communicate in English,German,Japanese One Package Services Fast lead time Stable Quality Rigorous work attitude No quantity limited
    > Read more
    Employees
    500 - 1000
    Year of foundation
    2004
    Certifications
    IATF 16949:2016

    Watch

    Bölge Industrial Equipment Machiner...

    We are an experienced manufacturer of tire building machine equipments to the market since 1976. Also we are supplying tire building machinery equpments to local and Europan Tire Manufacturers for their many kind of productions. Our productions are attracting attentions with high quality and well-processed design. We are extremely assertive about our experimentation and less price policy.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1976
    Certifications
    ISO 9001:2015

    Watch

    Sichuan Ideasys Precision Machinery...

    Sichuan Ideasys Precision Machinery Co., Ltd. has more than 2000 square meters of production area, precision machining of various mechanical parts. The business includes wax loss precision casting machining, forging machining, die casting machining, bar, tube and sheet machining. Materials cover stainless steel, heat-resistant steel, carbon steel, low alloy steel, high temperature alloys, non-ferrous metals. With advanced production equipment and testing equipment, strong ability of mold and product design / production, casting production and precision machining. Sichuan Ideasys Precision Machinery Co., Ltd. is a engaged in products research & development as one of professional manufacture with rights of import and export. Main products: castings, forgings, precision machining parts, die casting, other mechanical parts and assembly parts for export.  Business services to the wide range of automotive, fluid chemistry, electrical fittings, medical equipment, food machinery, petrochemical equipment, engineering with assembly and so on. Company has nearly 20 stable customers and communities, products are mainly exported to North America, European Union, Australia and more than 20 countries and regions. With a strong human resources, advanced technology and equipment, leading technology, innovation and R & D team, quality service and modern management tools, honed through years of competition in the international market and become quality supplier of GE、BOSCH、Voestalpine、Audi、Foster Wheeler and many other well-known international buyers. With the "integrity first, service first" business philosophy and "innovation, pursuit of excellence," entrepreneurial spirit, we whole-heartedly welcome the world friends come to consult and negotiate business for mutual great development!
    > Read more

    Watch

    KOVINOTOKARIJA vl. Dražen Vida

    Founded in 1985. we started mass production of specialized parts for the heating industry. As we stepped into 21st century, we started to abandon our old understandings and shift us more to general turning, milling and grinding of parts for various industries. Today, we are a small, but proud metal workshop with our heads turned to the future. And we like to turn things, especially metal! So, dear traveler, when You look at our profile, don't be a stranger and give us a call. As you know it, in our world the machines speak.
    > Read more
    Employees
    5 - 10
    Year of foundation
    1985
    Certifications

    Watch

    MA-MICROMEC SRL

    Ma-Micromec Srl, is a company specialized in the production of precision turned metal parts for industries of various sectors: automation, electronic-electrical engineering, plastic materials, pneumatic-hydraulic and many other sectors. Ma-Micromec Srl is a new company in the sector but is able to guarantee quality and reliability in production thanks to the skills handed down and acquired by past generations. The technicians, all highly specialized, make their experience available to be able to professionally produce products with high quality standards. Ma-Micromec Srl, thanks to the use of modern technologies, has the ability to produce high-precision articles made on CNC mobile head lathes and cams with a bar passage from 1.5 to 25 mm.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2015
    Certifications
    ISO 9001:2015

    Watch

    TECHNOMETAL-Orfanidis EE (lp)

    We provide machining services of unit parts, prototypes and short-run production. Problem-solving and provision of suitable machining solutions are what we do best. Our customers trust us because we are flexible with their enquiries and requirements, we deliver on-time and offer short- delivery times. This is what makes us stand out from the rest. The precision parts that we produced are known for its top quality, due to the raw materials used. Our experienced and passionate personnel carry a high sense of responsibility towards our customers and their product. We continue our expansion and growth, especially in technological developments. Our precision components are manufactured according to customer drawings, specifications and international standards. Design and production by reverse engineering method is also provided as a service. And finally, we offer competitive pricing, guaranteed!
    > Read more
    Employees
    10 - 20
    Year of foundation
    1986
    Certifications
    ISO 9001:2015

    Watch

    PRO CNC GmbH & Co. KG CNC-Fertigung...

    "A systematic approach to solution" The company PRO CNC GmbH & Co. KG was founded on 01.12.1990 by Michael Pfeiff under the name Michael Pfeiff. The company's headquarters was first in Varl and was moved in 1994 after Luebbecke. On 01.09.2003, the company was acquired by the current owner Volker Meier kink and then operated under the name Pfeiff toolmaking. Since 01.09.2013 we now operate under PRO CNC GmbH & Co. KG - Production Engineering and Mechanical Engineering. Mr. Meier is one kink with the company since the very beginning. The company PRO CNC GmbH & Co. KG deals with the full range of mechanical manufacturing (turning, milling, drilling, grinding) and the assembly of components and machines. Focus here is the contract manufacturing in the milling, especially the production of small parts. Cubic parts up to an edge length of 1000x600mm currently can be handled in-house CNC PRO GmbH & Co. KG. The company PRO CNC GmbH & Co. KG is able to deliver to the customer from the initial sample to mass production all.The range of parts includes the classic item to automobiles mass part. Is manufactured to eleven computer-controlled machine tools and machining centers the latest generation with up to four axes and two spindles. Some of the machines are equipped with rotary tables change. As a manufacturer, we would like to mention, among others, Bridgeport, Brother, YCM and Swabian machine tools here. The rotation range is among other things a lathe with driven tools, Y-axis and bar feeder (Biglia B650Y-turning diameter over bed max. 400mm) are available. Programming is based on dialogue and DIN controllers and by means of a CAD-CAM work on SolidWorks basis. Currently, the company PRO CNC GmbH & Co. KG two masters, a mechanical engineer, eight skilled workers, five assistants and a force in the commercial sector employs. The customer base includes about 30 customers from all sectors of the craft and the industry (electrical, mechanical, automobiles, pharmaceuticals, chemicals) in regional areas. Its customers include names like: VW, AEG, Federal Mogul, Faurecia (automotive sector) Harting, IMA, Kolbus, Oystar (engineering sector) VTG wagon Graaff, EuroMaint Rail (rail-rail vehicles) In May 2004, the company has been certified according to DIN ISO 9001-2000 since 2010, accordingly to DIN-ISO 9001-2008.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1989
    Certifications
    ISO 9001:2015

    Watch

    CGS S.r.l.

    CGS Srl is born as artisan company at the end of the sixties to assume, more and more, in the years a real industrial structure; currently it occupies an area of 1500 square meters where work about twenty employees. CGS manufactures a wide range of products including precision components and small parts, drawing fittings for the earthmoving industry, agricultural machinery and oleodynamic systems, as well as components ready for a wide range of industries; They complete the range of transmission organs such as angle heads and jacks and magnetic devices, solenoids and rigators. Thanks to decades of experience and the sensibility and attention for the demands of the clients, CGS Srl is able to offer personalized solutions and high quality by ensuring advice and assistance in the phase of pre-sale until delivery. The technological adjustment and the continuous search of operation models more and more to the state-of-the-art allow CGS to propose to the own clients efficient and effective solutions both beginning from the particulars present in catalog and beginning from the sketches and from the specific applications of the clients. This approach based on the support to the client and aimed to the flexibility allows CGS to affirm its own presence on the Italian and European market more and more. Turning, finishing and treatments CGS is equipped with two production units that perform all the necessary turning operations, organizing overlapping production to ensure a total daily production capacity of approximately 60,000 hours on 17 turning centers. CGS Srl is able to realize precision components with diameter between 3 and 70 mm; the worked materials embrace the whole range of the automatic steels,from reclamation, cementation and good part of the stainless further to brass, aluminium, bronze, copper and plastic materials. Finishing works CGS also has a specialized department in the following stages of finishing: - Reaming, Tumbling, Milling with No 2 vertical machining centers, Lapping, Countersink, Deburring, Surface rolling, Assembling with the possible management of commercial components or supplied by the customer, Micropunting Marking. Grinding processes The department designated about grinding works performs the following manufacturings: - Centerless and Plunge grinding with tolerance of 3-5 microns and roundness of 50% tolerance - Grinding on centers, surfaces, centerless and superfinishings where tolerances are outside of what we can obtain internally. CGS guarantees accurate control of the quality of the works implemented, and therefore of the finished detail delivered to the customer. Washing the parts with ultrasonic and vacuum technology - For all the details that need to treated, they are washed at the CGS production department, before starting the external treatment required to obtain the best result in terms of quality and efficacy of the treatment itself; - All untreated ferrous items are delivered after a suitable washing phase during which a protective substance is applied, with a guaranteed 3-month standard length, which can be extended on request.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2008
    Certifications
    ISO 9001:2015

    Watch

    PMT GmbH

    Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials. We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more! We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2005
    Certifications
    ISO 9001:2008

    Watch

    A.D.O. Zerspanungstechnik GmbH

    The family ADO was founded in 2001 and since then performs turning and milling of individual items, as well as to small and medium series by. The good cooperation with competent partners makes it possible also to offer our customers yet another addition service. These include round and flat grinding, all welding processes, laser and flame cutting and surface treatments and hardening process. In addition to a flawless, high-quality execution, our company is a fast, economical and flexible to the customer, which is enabled by our lean and efficient disposition. Due to our PPS system and the MDESystems we are able to individually adjust our production to our customers and respond to particular emergencies. Through this technique, we can guarantee our customers absolute punctuality in every situation. We guarantee the quality of our work you through competent and motivated employees.Through our clear mission run, the DIN EN ISO 9001:2008, we guarantee quality and punctuality. On request, we conduct a 100% inspection of parts. Machining Using the latest CNC technology, we are capable of meeting your requirements, whether single piece or series, to meet the highest quality. Quality assurance We guarantee the quality of our work you through competent and motivated employees. Through our clear mission run, the DIN EN ISO 9001:2008, we guarantee quality and punctuality. On request, we conduct a 100% inspection of parts. Measurement Quality is our highest demand - measured with the latest 3D coordinate metrology. Frästeile max. Length 1020 mm max. Width 650 mm max. Height 500 mm Turned parts max. Diameter 600 mm max. Length 800 mm Flange components max. Diameter 600.00 mm max. Length 800.00 mm Screws, connectors, and gears max.Diameter 600 mm max. Length 800 mm
    > Read more
    Employees
    10 - 20
    Year of foundation
    2001
    Certifications
    ISO 9001:2015

    Watch

    Compass Hardware Co.,Ltd.

    We are manufacturer and exporter of customized parts, with machines in turning, milling, casting, stamping, welding, ect.. Located in port city Qingdao, it's convenien to arrange shipment no matter by sea, by express or by air. Welcome to contact us if you have inquiries, professional team will help with what you need.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2010
    Certifications
    ISO 9001:2015

    Watch

    INOTECH CONSULTING

    We offer solutions in milling, turning and welded mechanical parts and subassemblies for German, French and Swiss companies. Machine tool park has the option to combine automatic and manual operations, is ideal for prototypes or for production of small quantity. We are specialised in manufacturing of machine parts using mid-hard/hard steel, stainless steel, aluminium, plastic, using the following operations: - Oxygen cutting max.100x3000x8000mm - Welding weight max 50 t - Turning Diameter.20-5000 mm, L100-10000mm - Milling 10x10x10mm-2000x8000x1500mm - Heat treatment 3500x3500x13000mm - Assembling of mechanical parts For 17 years we are providing machining and welding parts subassemblies for special machines like packaging, pharmaceutic, cosmetic, agriculture, nautical, automotive, offshore, metallurgic, industrial robots, conveyors, machine tools, aeronautical, Ariane 6 space project. We are supplier for esteemed companies in the industry: - Primetals Technology (A joint venture of SIEMENS, Mitsubishi Heavy Industry) - BARON (packaging machines for pharmaceutic industry, France) - ERI Machine (packaging machines for pharmaceutic industry, France) - DUNE (packaging machines for bread, France) - Flexico (packaging machines, France) - MAXEI (special machines for automotive industry, France) - 2MI Group (special machines for automotive industry, France) - AISA (packaging machines for cosmetic industry, Switzerland) - LEMTRONIC (special machines for testing connectors Switzerland) - Latesys from ADF group (aeronautical and special machines, France) - PMTL of Nexeya group (aeronautic, space and defense industry, France) - CERN (European Council for Nuclear Research, Switzerland) - MAFI ( leading manufacturer for seaports, industry, logistics and distribution centers, Germany) working with our sister company ROT AUTOMATION - NEFF (hydraulic presses, Germany) Our work: - We are delivering projects from start to finish: - model 3D - Autodesk Inventor parts / sheet metal / assembly - drawings 2D Autodesk Inventor or AutoCad - rendering 3D including design, etc (add your technologies, software, etc) - manufacturing mechanical parts - logistic operations We are competent and skilled staff, who are fluent in English and French.
    > Read more
    Employees
    < 5
    Year of foundation
    2003
    Certifications
    ISO 9001:2008

    Watch

    SBS Group

    We, the SBS from Aalen, have been offering - in the truest sense of the word - precision in series for over 35 years. Founded by Friedrich Bollheimer, the company is now in the third generation. SBS combines the individuality and flexibility of a family business with distinctive technical know-how and the latest CNC production technology in the areas of turning, milling and assemblies. We provide our customers with advice from the manufacturer's point of view, from the prototype to the series of component parts, via an efficient supply chain. In addition to our high-quality machinery, we also have an assembly department. In addition to the production of precision components from prototypes to series parts, we take on complete process chains for our customers through to the implementation of system solutions. This enables us to offer you ready-to-install solutions. TO PLAN. TO DEVELOP. TO EDIT. TO USE. SBS.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1985
    Certifications
    ISO 9001:2015

    Watch

    Werner Rauscher - Feinmechanischer ...

    The company Rauscher has been active for different industries since 1984th The realization of specific customer requirements We achieve this through our modern and diverse machinery. Fully automated loading and unloading systems, we ensure a high Productivity in the production of turned parts. Do you have technical questions or want more detailed information? Then call us on the number 089/793 20 41, or send an email to: info@cnc-dreherei.com We advise you individually and in detail in your affairs. Translation by Google Translate
    > Read more
    Employees
    5 - 10
    Year of foundation
    1984
    Certifications
    ISO 9001:2015

    Watch

    CMP di Paganotto Deris srl

    Professionals in the metal-mechnical sector since the early Nineties, we operate on commission, guaranteeing rapid service and products that aspire to perfection in order to satisfy the needs of the customer in the best way. We not only respond promptly to inquiries, but we can always propose innovative solutions and products made to measure, thanks to the flexibility of our organization and production. We operate in every sector of high precision mechanical processing and scrap removal. In the production of high precision mechanical parts, lathing is an essential process and we perform it on small, medium and large lots. With a 5-axle continuous work center we perform milling processes with the maximum productivity. We are specialized in welding small runs for samples and for the production of single pieces for medium-heavy carpentry.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1992
    Certifications

    Watch

    Viewtrade is Part of Viewsoft Srl

    Consortium of companies operating in the development of foreign markets. It acts as sales department for the export of a number of small medium-sized industries located in the Veneto region, all operating in the sub-supply in the mechanical industry. Our partners can offer, among others, the following main operations: • Turning • Milling • Grinding • Gear Making • Cutting and bending of sheet metal • Sheet Metal Forming • Assembly • Complete Subassemblies Operative Office in Corso Fogazzaro - Vicenza IT
    > Read more
    Employees
    20 - 50
    Year of foundation
    2011
    Certifications
    DIN EN ISO 3834

    Watch

    Koutsogiannis LTD Steel Workshop

    Koutsogiannis LTD – Steel Workshop was founded in 1994 by Mr. Koutsogiannis and Ms. Christofi. The company has been active for 24 years in the fields of mechanical engineering and repairs, emphasizing in the high quality and fast delivery times. We are a company overlooking the sea, just 10 km from the port of Volos and above us the Mountain of Centaurs. We are a small team. Titles and positions are of secondary importance for us. Fostering long-term relationships with a diverse mix of latest technology and highly skilled employees. Building on our long experience and in-depth know-how proven in numerous reference projects. Team spirit is lived every day. We pull together in the same direction. Together we have overcome any economic crisis. We have no perfect marketing, but great products and a good advice for our customers. Our success is confidence in our people and not their control. Quality is the pride of every employee and not just a corporate goal. A machining piece which is supplied to the customer is at first a piece from Kostas, Giannis, Nikos etc., and only secondarily one from Koutsogiannis LTD. Customers are our friends and partners. Each employee is responsible for the future of Koutsogiannis LTD.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1994
    Certifications
    DIN EN 1090

    Watch

    Baier Drehteile GmbH&Co.KG

    Manufacturer of series turned parts from all cut materials according to your specifications. In addition to being a reliable supplier, our major passion is the development of optimum solutions.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1971
    Certifications
    IATF 16949:2016

    Watch

    Peula UG haftungsbeschränkt

    CNC contract manufacturing, welding assemblies, individual parts, serial parts ORGANIZATION PLACE: GERMANY- Order logistics and deliveries through our own group transports up to twice a month. Goods are delivered with a German invoice, without further or hidden costs. PRODUCTION LOCATION- Bosnia and Herzegovina, EX-YU Läder MANY POSSIBILITIES- We combine our own production with our subcontractors' capacities in a pure source. Parts are carefully checked and only then delivered! STORAGE- In Germany (75417 Mühlacker) we can store any batches in advance, check them again and deliver at short notice! EXPERIENCE- Long-standing (over 20 years) experienced employees in various manufacturing processes. We have been delivering to our German customers for over 5 years. RESPONSIBILITY- Goods we deliver are insured, but we always accept sensible complaints and find a solution that suits everyone! Over 30 companies in Germany procure goods from us. POSITIVE THOUGHTS - our customers are slowly becoming our personal friends! Working with friends is fun, security and trust.
    > Read more
    Employees
    < 5
    Year of foundation
    2020
    Certifications

    Watch

    O.Me.Ba. snc

    Mechanical processing for third parties: turning and milling.
    > Read more
    Employees
    5 - 10
    Year of foundation
    1964
    Certifications

    Watch

    HACKL Metall-Technik GmbH

    HMT Inside. Jung.Unkonventionell.Wild. We machine, weld and assemble - from simple to highly complex parts. Our wide product range offers you many advantages: they reduce the number of suppliers, thus saving expense in purchasing and optimize the quality and quantity of your purchased parts. Consider HMT as "internal division" of your company - through open communication, flexibility and adapted processes, we can create together a successful long-term partnership for the future. In addition, you benefit from our network, consisting of competent partners in the areas of surfaces, heat and other treatment techniques. It's the mix! We are your partner that responds quickly and flexibly to your current production needs and at the same time not lose the vision. We are actively trying to make your life a little easier, through adherence to agreements and by personal, ongoing consultation and cooperation. We support you ... ... already in the development phase to the production of prototypes and their production engineering optimization. ... throughout the product life cycle with series parts - from a few to tens of thousands of pieces per year. ... continually and demand-oriented with spare parts. We supply ... ... to order (Build to Order): The requested batch size to the desired delivery date. We pack and label the various components true to your specifications and compile them into matching commissions. ... suppliers controlled (Vendor Managed Inventory): We take responsibility for the assets of your purchased parts. Through continuous communication and exchange of inventory and your production plans we will optimize your inventory and purchasing costs and respond quickly to fluctuations in demand. So you can quickly and act flexibly in a dynamic, fast-paced market.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1980
    Certifications
    ISO 9001:2015

    Watch

    Torneria OML Srl

    Torneria OML is specialized in high precision CNC machining. Since 1982 we have been specialized in the processing of any type of metal. Thanks to the use of the latest generation and highly technological machinery, we are able to guarantee the highest quality and precision, always offering an excellent quality / price ratio. Our qualified and constantly updated staff is able to quickly manage any type of order, from small and medium-sized production to high-precision machining. Thanks to the adoption of modern CNC technologies, we have considerably reduced production times, greatly increasing the reliability of the productions themselves. To always guarantee quality products, we have introduced systematic checks according to UNI and ISO 9001: 2015 and ISO 14001: 2015 regulations. Our company is part of the ATI set up for participation in the project “Venetian mechanical manufacturers on behalf of third parties present themselves in Europe”, which will be implemented using the POR Veneto region funding, part of the ERDF. Thanks to the use of the latest generation and highly technological machinery, we are able to guarantee the highest quality and precision, always offering an excellent quality / price ratio. Our qualified and constantly updated staff is able to quickly manage any type of order, from small and medium-sized production to high-precision machining. We are specialized in the creation of components for the sectors: Valves, Gas Components, Pneumatic Components, Automotive, Hydraulics, Hydraulic, Naval, Nuclear, Oil.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1982
    Certifications
    ISO 9001:2015
Limit search by:
Region
Technologies
Materials
Company data
Industries
Certifications