AUTOMAC is your partner for innovative and reliable solutions in the field of special machine and plant construction, steel construction, handling equipment, vacuum lifting equipment, as well as the cabinet and in the field of contract manufacturing. We ensure that you get technically perfect equipment so that you can produce cost-effective and reliable. The benefits for you ● Design according to customer services. ● Maintained and tested machinery and equipment. ● Competent advice. ● Cost produce by cheaper investment. ● products with high quality standards. ● Meeting promptly manufacture of our products. ● Installation, maintenance, commissioning and service Services for the end user: ● Design according to customer services ● Plant ● Steel Construction ● Welding ● Samples and Sonderbau ● serial production ● cooperation in product development Contract Manufacturing: ● Turning, milling and drilling ● installation work ● welded assemblies ● coloring NEW! Flame cutting Service / burnouts plasma / oxy fuel cutting machine up to 150 mm thickness. Work table 6000 x 2000 mm Plasmamakieren, plasma graining possible. Welded assemblies, welding technology Reparaurdienst. Sandblasting of the modules / burnouts! Large suitability proof! Cabinet: We design, build and install cabinet systems in different designs according to the specific requirements and operating standards of their customers from the mechanical engineering and plant construction. The spectrum ranges from small control panels or panel to the simple cabinet to large cabinet lines - from the PC cabinet enclosures for up to big benefits. All procedures during project planning and production are subject to continuous quality control. Each cabinet is tested prior to delivery in accordance with the relevant national and international standards and wired to desire location worldwide and put into operation. Our products As a provider in the field of special machine and plant construction, steel construction, handling equipment, vacuum lifting equipment, as well as the cabinet, we offer a wide range of products and services. The products listed below are representative examples of our product portfolio dar. We develop customized solutions for you. Talk to us! ● Plant for the precast concrete industry ● conveyor and picking ● Milling Machines ● Handling Systems ● Lift Tables ● Storage Systems ● Presses ● Test Stands ● Welding and special devices ● Heavy load handling equipment (cranes) ● Vacuum lifting equipment ● Separation systems ● equipment for foundries ● Wrappers ● Special Machines ● Steel Construction ● Contract Manufacturing ● Service Services ● Control cabinet

HUMMEL AG is a world-renowned manufacturer of cable glands, connectors, heating and plumbing products and customers turned parts with more than 350 employees. Since its founding in 1948 HUMMEL enforced by entrepreneurial instincts and innovative technology to the markets of the world. Own locations in southern Europe, the Far East and South America are the logical consequence of our international growth. At the headquarters Waldkirch advanced technology of the machinery guarantee precise, flexible and efficient production with the highest quality and service for the customer. Metal & Plastics Technology The metals and plastics technology (MK) contains the complete production facilities of HUMMEL AG. Especially the HUMMEL products are manufactured according to ISO 9001:2000 On a production area of ​​over 8,000 m²: * Cable Glands, * Circular Connectors, * Vent valves, .... These manufacturing facilities also allow for customized solutions. With our advanced machinery and equipment park and the know-how acquired over 60 years of metal and plastic processing, we produce customized special parts for other well-known manufacturers, such as from the Heizkreisverteilerbau, from the electronics and automotive supply industry, building musical instruments and from the Optoelectronics . HUMMEL underscores not only its own product quality, but also offers the customer nor the HUMMEL quality for its own products. The MK business currently employs over 120 employees. The power spectrum of HUMMEL includes: Materials: Non-ferrous metals (brass, aluminum, nickel silver, bronze, etc.), Automatic turning steels, stainless steels Plastic (injection technology, bar stock) Zinc die casting Dimensions: Multi-spindle ø 5 mm to ø 52mm Single-spindle ø 8 mm to ø 100mm Machinery Machining / Injection: Ring Dreher (material from the ring) ø 0.5 mm - 5mm CNC single-spindle ø 5mm - 100mm Multi-spindle cam-controlled ø 5mm - 52mm Multi-spindle CNC ø 8mm - 52mm CNC lathe for machining chuck dia 160mm Machining centers Zinc die casting Plastic injection molding machine (clamping force + parts by weight) Vertical injection molding machine for molding of parts (washers) Assembly: complete assembly (Small and medium series) Coating: galvanic coating

Pascal Kierstein Coordination office Your partner for mechanical and electrical installations. We take care of your project as a whole.

A.C.E. is a well known and qualified company in North Italy (near Milan) , which has been working for over thirty years in the field of the preparation of wiring harness for electrical and electronic use, and in the field of assembly of components on professional printed wiringboards. Our pluriannual experience and the equipment we utilize, place our company on top level for the preparation of hand assembled harnesses with multiconductor cables, carried out on hobnailed table. The wire assembly of every kind of screened and coaxial cables, the parting, the interleaving, the butting of flat cables and the making of the most different harnesses for various applications permit to us to fully satisfy the clients’ needs as far as the electrical and electronic wiring is concerned. We are able to supply a very reliable product in a very short time, technically checked and subjected to a close inspection. Thanks to our companys organization and policy, we are able to offer the teccnical departments of our customers the most rational and economical wiring harness system which meet the quality standards required for a vast range of projects and for the best components marketed in Italy. Furthermore we are able to realize all the necessary technical documentation and the lay-out of the wire harnesses. The ongoing effort in order to guarantee a certain level of quality of the supply, let A.C.E. acquire clients operating in several market fields, such as air conditioning, elevator and escalator systems, communication equipment, electromedical equipment, automation system, measuring systems. Working as subcontractors, the satisfaction of the customer has always been our main purpose. We are able to work either with self purchased materials or with materials provided by the client. In the year 2005 a new production site ACE Cabling was founded in the Republic of Moldova in Chisinau. Both establishments are certified ISO 9001:2008 and furthermore our products could be labeled UL & CSA for the direct export in USA and Canada.

MEGA Int'l in Roermond NL/Neeritter was founded in 1996 as an engineering firm and quickly expanded its portfolio with a large number of trading activities arising from the wishes of customers who, in addition to familiar development concepts, also purchase machine parts, machine modules and even complete machines entrusted to MEGA Int'l. MEGA Int'l Roermond/Neeritter works closely together with a large number of European and Global top producers specialized in a wide range of production and product disciplines that can cover a considerable part of the needs for machine manufacturers. MEGA Int'l is capable of using it suppliers to play an important role in cost price improvement in order to stay ahead of the strong global competition, in terms of price and technique.

We are a reliable partner and supplier for our long-standing and new customers. We manufacture and deliver custom-made products according to your specifications from steel, stainless steel, aluminum, titanium, etc. metals to meet the highest demands. We carry out prototype, individual, microand series production as well as special designs for industry, trade and private use.

Plastics for longer life® - Increase the service lives of your machines with plastics Lifetime up - costs down Lower costs and raise service life by eliminating lubrication and lowering maintenance works, everything delivered from stock immediately - that is the core idea and objective behind all igus® products, systems and services. igus® plastics with their tested and proven properties in durability, friction and stability are the main focus of the igus® products. We offer you 80,000 products from stock and from "Size One".

Welcome to our company page! We are a small family business that deals with many activities. We manufacture steel platforms, welded constructions, roofs, railings, handrails, steel components, stainless steel (predominantly 1.4301) and aluminum alloys. In addition, with our machine park, we are also able to carry out small series as well as single part production in turning and milling work. Recently, we have been accompanied by a flame cutting machine, with the help of which we can also produce thicker plates independently and at short notice. Laser and bending work are no problem for us and our neighboring companies, which means that sheet metal working is also possible. We are also happy to take over 3D CAD work and can thus offer you an all-inclusive package. :) If you have questions about our company or our further activities, do not hesitate and write or call us. Greetings from the company Schmid! "Do it!"

1 Installation of mechanical, electrical, electronic components and devices: - Components for office equipment - Lighting equipment (LED and conventional) - Switch based piezo technology - Other Devices & Cable Assemblies 2 Controls and switchgear systems for machines, equipment and processes from simple hardware control to customer-specific programmable PLC control 3 Hand placement and soldering of printed circuit boards from design to quality control 4 Cable preparation and production of special cables from the single cable to the complete wiring harness 5 Adaptation development, design, project management in the IT service fields 6 Distribution and application of electrical / electronic components and systems for industrial automation OMRON system provider 7 Hire and recycling of office, warehouse and production areas at the site in 99974 Mühlhausen

The IS-metal technology is the best resource in the field of metal processing. Our service for you: Punching with modern CNC machines Folding of the stamped components and if desired, the pre-assembly, such as welding studs and Pressbefestiger translated, and general welding. Also, the surface treatment such as sandblasting and powder coating is carried out directly in the house without third-party suppliers. CNC turning and milling parts

We are Pecho, a company with a fifty-year tradition, founded in 1968. We are active in the manufacture of cables, the production of components for the automotive, agricultural and electrical industries, and in plastic injection molding.

We have lasers and milling machines for 2D and 3D processing

http://eiben.sk/en/company-profile

Jozef Hargas - HYPERON is a company that can offer complete services in production and sales with refined lines, cable drums and installed cable systems. Our products are, for example, used in manufacture of machinery for the food industry, equipment, Lifting Equipment, etc.. Our company is located in Nove Mesto nad Vahom, a town in western Slovakia in the heart of Europe. Thus we have the possibility of goods - to deliver quickly from Slovakia in all other European countries and back - without border formalities. We guarantee short installation work and have workshops and a specialized laboratory. In mass production harnesses and cables are produced with the assistance of machinery and manufactured in small to medium batch production of cable harnesses by hand. The conductor cross-sections can in the processing of 0.08 mm ² / AWG28 to 6 mm ² / AWG10 lie. Our manufacturing facilities and our staff are available to you. Our work area includes the cable assembly, ribbon cable manufacturing, crimping, cable production, stripping, cable harnesses. In addition, you can use our packing services and much more are available.

The Linner Tooling GmbH is a family owned company in Wolnzach near Munich with about 120 employees. We are on the market now for about 30 years and are known for reliable quality, customer focused services and a very high degree of flexibility. To keep our position in the future we focused on three separate and highly specialized divisions.

Precision series production Our series production deals with companies in the electronic industry mainly. For those companies a high quantity of products in good quality matters and so we use our turning automats, rotary transfer machines and indexing table machines in optimal way to meet theire requirements in a flexible and economical way.

Precision tools and components The division has a big branch of customers from different industries for whom it produces special-purpose tools as fastener for reversing plates, profile and forming tools and many more. The range of parts produced in this division is limited by diameters up to 250 x 250 mm and we use combinations of grinding, eroding, milling or turning in an optimal way to ensure good quality. Therefore we use 5-axis milling centers and the latest CAD / CAM Systems to guarantee repeatability and the high standard of quality.

Tool sharpening With most modern 5-axis CNC grinding machines and with the help of graphical simulation programs we produce new tools as stepped drills, profile millers and special-purpose tools. Further we regrind or reproduce special and standard tools with original geometrical data so the tools are as capable as new once.

Off course we also offer common and special coatings and we are able to supply kanban-systems, a stock at your place and supply you just in time.

In the area of industrial services, Benz Wiring Solutions GmbH offers various services according to customer requirements, from classic cable assembly to component assembly, such as cable harness assemblies, distribution boxes, drag chains, etc. Our field of activity ranges from development to series production. It is important to mention that we have a particular focus on project and development phases. This means that we can easily implement individual orders and samples. Do you have any questions or do you need further information? We are looking forward to hearing from you!

The Company The endeavor of Electrical & Strobel construction, it is the design, Assembly and distribution of robotic systems and automation systems in quality conscious design. We select our suppliers based on the criteria of reliability, quality and flexibility. For our customers, we are always striving to achieve the best and to offer flexibility, service and development of a complete package. Engineering company CNC turning CNC Milling Laser Micro Welding Flat and cylindrical grinding CAD designs Toolmaking Jigs and fixtures Cutting Tools Robot systems complete with equipment.

WIR electronic, a manufacturer with more than 25 years of market experience, offers the following services: - manufacturing from individual customized single cables up to complex wire harnesses, 100% made in Germany - each product ist tested, with 5 year-warranty - consulting, design, engineering and production; everything from one source - 100% delivery reliability, with short communication channels to our customers - from batch size 1 up to 10.000 pieces, from prototyping to mass production - overmoulding (e.g. RJ45 straight/ angled; M12 connectors: A-, B-, D- and X-coded) - product range: data cables | single wires | ribbon cables | cable harnesses | coaxial cables | fibre optics | power cords | drag chains | control cables | bus cables (CAN, EtherCAT, PROFIBUS, PROFINET) | mounting/cabling of panels up to distribution boards | and many more - cables with extended or unusual length (e.g. VGA cables up to 50m, KVM cables up to 80m) - Production of cleaned cables (optical industries, medical technology, aerospace technology, micromechanics)

Component manufacturer for sensors (inductive, capacitive, optical), M8/M12/M23/7.8” connectors, IP67/IP20 IO systems, PLC controls, 3D profile lasers

Series and component assembly Cable assembly Measurement technology environmental, Vibration and climatic test Mechanical machining

Fa DVM GmbH is a relatively young company in Germany, but has been working for many years already with well-known German and European companies. Our establishment is located in the Swabian Unteraspach (Backnang). Fa DVM GmbH is a competent and reliable partner for the trustful execution of: • QUALITY TESTS • ASSEMBLY • REWORK • ZP / ZFP DESTRUCTIVE TESTING / DESTRUCTIVE TESTING • SUPPLIER MANAGEMENT available. Our wide range of methods and know-how are the basis for the successful and efficient implementation of your (potential) outsourcing projects. DVM company was founded in 2007. DVM company is certified to ISO 9001-2008.

We are your competent partner in fluid technology with four locations in and outside Germany - CNC long and short turned parts - Vertical turning - Assembly of final-tested mechanical components - grinding (inside, outside, in the passage etc.) - honing - milling - sandblasting - hard machining Complete machining on modern CNC machines (long and short turned parts, vertical turning) - complex workpieces (from rd3 mm to rd300 mm, vertical turning up to rd150mm) can be produced in batches from 1000 to 100,000 pieces - All steels, case-hardened and highly tempered nitriding steels, stainless steels, non-ferrous metals as well as extruded, sintered and forged blanks can be machined. Our precisely machined and accurately controlled individual parts are assembled with the supplied, controlled external parts and then tested. The end result is tested and perfectly functioning assemblies directly to the customer's assembly line.

The company Wilhelm Kimmel GmbH & Co.KG, Plastics was founded in 1952 in Sebnitz and is a company with decades of tradition in the plastics processing and preparation. Our qualified and motivated employees, our modernization investments and our quality assurance according to DIN EN ISO 9001 are a high level of guarantee for optimal satisfaction of customer requirements. Acrylic glass deformation: - Manufacturer of bath and shower trays made of acrylic glass in all standard bathroom colors - Production of Maßeinsatzwannen for the rehabilitation of Altwannen - Supplier of shower enclosures, bathroom furniture and whirlpool and airpool Injection: - Supplier of technical parts for equipment manufacturers - Supplier of moldings for home, garden, sports and construction or for attachment of electrical cables - Develop and manufacture new plastic moldings according to drawings or samples Extrusion: - Compounding of thermoplastics (except PVC), especially PA 6 and PA 6.6 - Grinding of PA fibers, unmodified or modified with property changing additives, such as fiberglass, glass beads, or mineral fillers in the colors black, white, natural and gray.

PRODUCT DEVELOPMENT Regardless of whether it is design, form, functionality or process flow, our experts in the respective areas are available to you throughout the entire process. We not only offer them CAD implementations, 3D printing and simulations, but also offer improvements and suggest changes to achieve the best results. CAD/CAM Regardless of whether it is a sample part or a 3D model of your product, our designers create 3D models for viewing and then drawings for the production of tools, which are manufactured in our own workshop. cad_alat2 Moldjpg MOLD MAKING In mold making, our focus is on complex mold making projects for special product groups, primarily for the electronics industry. Our core competencies include the production of premium injection molding tools for connectors and complex small parts. We offer everything from a single source and support our customers throughout the process, from the idea to the finished product — and beyond. Because we also carry out maintenance and modification work quickly and reliably — even on other forms, if necessary. INJECTION MOLDING We ensure that good ideas also become good products. Small and large parts from theory can be produced in a wide variety of shapes, colors and material properties during injection molding. Anything is possible here. With our injection molding experts in Irig (SRB) and our partner network, we also offer solutions for particularly complex or tricky shapes and are therefore able to meet every customer requirement. With our injection molding machines from 25 t to 450 t, we are ready for any task. Alat se otvara Assembling Maual MANUAL ASSEMBLY Our system services for you are completed by offering the complete assembly of all plastic parts manufactured by us as well as any necessary purchased parts. This allows you to make full use of the added value that we provide you with through our cooperation across the entire value chain. From idea to assembly and timely delivery, we are therefore your reliable partner. We not only provide you with injection-molded parts, we also assemble complete components for you from several plastic and supplier parts, then pack and deliver them to you in their entirety. It makes no difference whether you provide us with the necessary functional parts or whether we buy them according to your specifications. In the end, you will have a ready-to-install and functional module at your disposal. CABLE ASSEMBLY We have an in-house department for cable assembly. To ensure a high-quality and reliable product, we use materials from renowned global manufacturers such as ConexCon, Conectronics GmbH, Molex, JST, TE Connectivity, Amphenol and many others; conductors in accordance with VDE and UL standards. We also have a wide range of tools for the manual and mechanical crimping of various wire ends, core and cable cutting machines, as well as devices for checking finished cables. Each finished cable goes through detailed quality control, so we can guarantee that you get the best quality and a long-lasting product. SMD PICK & PLACE In our electronics department, we are able to assemble specific circuit boards for our customers in order to round off the process chain of our range of services. In this case too, we offer a complete service, from development to the tested electronics that customers need for their products.

We manufacture additive parts using 3D printing (additive manufacturing). All processes and many materials are available and possible!

The CIERRE company was founded in 1970 and has grown to around 95 people. CIERRE is a Subconctractor for the Design and Poduction of Electrical, Electronic and Electrical Equipment. Also services such as the supply of materials; management of the customer’s Material Deposit at us. Links with the Customer’s ERP software. Cierre has a Commercial office, Purchase office; Technical office; R&D office; CIERRE performs Design and Construction of: 1---elektronic, electrical, electrical, equipment (apparatus); 2---wiring of traditional and SMT electronic boards with lines of 30.000 components hour. 3---cables; wiring of single cable; multi-pole cable; SPEVIAL; RESINATED; MOLMED cables; according to customer’s design; signal cables on board Pre-Shaped, with a high number of conductors and then TESTED; power cables up to 240mmq; cables from 0,12 mmq to 180 mmq; flat cables; 4---assembly of POWER electronics; on panels; in cabinet; groups; sub-groups; power semi-finished products; UPS units; Inverters; Power supplies; converters. 5---all about customer specifications and requests; even RHOS. 6---CIERRE is a TUV Certified Sub-contractor ISO 9001; ISO 14000; UL cables.

For over 40 years, we have been manufacturing adapters for “end of line” test benches, high-voltage contacts (HV), complete systems, test cable harnesses, etc. Our customers include almost all well-known automotive and truck manufacturers worldwide as well as their strategic suppliers. From manually locked test benches to fully automated test benches for EOL testing, our adapters and our patented technology for tolerance compensation for small miniature test plugs can be used for testing processes up to millions of times. From consulting and feasibility research to 3D design, 3D prototyping and individual and medium-sized series production, we offer our customers concentrated experience and expertise.

Welcome to ATG Automation helps companies to design processes in manufacturing, logistics and quality control more efficient. ATG, automation Count designs, manufactures, installs and services individually tailored automation solutions for and in companies from various industries. Customers from mechanical engineering, automotive suppliers, companies from the food and pharmaceutical industry, agriculture and many more from the manufacturing and processing industries use according to requirements designed ATG automation solutions to increase efficiency and quality. A team of 26 highly qualified and experienced staff creates custom part and complete solutions, customized, extended, modified and regenerated existing plants - always focused on a trusting and long-term successful partnership with our customers.

Familiar like the department next door. Toll manufacturing with in-house manufacturing. Thanks to our close network of local partners, we are able to offer a far-reaching technological spectrum. We take over your labour-intensive assembly tasks and test systems individually. Excerpt of our services: 1 Manufacturing by machining, bending/edging, laser cutting, welding 2 Assembly of components, assemblies, mechatronic systems 3 Process simplification through sophisticated procedures, simplification of the supply chain law, reduction of the throughput time from the idea to BANF.

VKE GmbH & Co. KG is based in Heidenheim near Ulm and is managed by the managing directors Valentin Klöpfer and Alex Ziegler. The company was founded in 2014 and specializes in the development and sale of innovative, customer-specific solutions in the areas of industrial automation, special machine construction and plant construction. VKE is also a reliable partner in the area of CNC parts production. The company is certified according to DIN EN ISO 9001: 2015 and, in addition to its headquarters in Heidenheim, operates another branch in Iggingen. The offers are aimed primarily at the automotive industry and its suppliers, as well as customers in the fields of process engineering, aerospace technology or the electrical and / electronics industry. Your advantages: -Personal care by a contact person for all services -Short decision-making, fast and flexible -Complete solutions from project planning, construction, manufacturing, assembly, Commissioning up to the training of your employees -Experienced and committed employees -Great vertical integration and lean processes ensure short delivery times -Excellent product quality and high delivery reliability On its website, VKE GmbH & Co. KG offers its customers and visitors detailed information about the company and the products and services offered.