The company Železnobrodské Strojírny sro is located in Northern Bohemia in the town of Železný Brod. The company was founded in 1965 as a main supplier of glass machines for the Liberec region. At present, the company employs 20 MA and is oriented towards general mechanical engineering. JOB SHOP Production area approx. 2000m2 EN ISO 9001: 2016

Since June 2007 we have been working independently in machine and fixture construction as well as in contract machining. Our area of competence lies in the processing of customer-specific orders in general mechanical engineering, tool and mold making as well as special machine construction. We manufacture various components made of steel, stainless steel, aluminum, cast iron and plastics on our modern machines. We can also machine the most difficult components with up to 5 axes on our processing machines, with quantities of 1- 5000 pieces. cover.

We, the Raskopf company, have been working in tool and mold construction at our location since 1923. It all began with forging dies for the massive forming industry. We have been manufacturing permanent molds for aluminum casting since the 1990s. Here, the production of molds for car wheels has become a special focus of our company. In recent years, however, the proportion of other cast aluminum molds has grown steadily. Our sales markets are Germany and the EU, e.g. Denmark and Austria.

ALEGROMEC has open its business as a representative of multiple Romanian metal work companies. Our main goal is to develop long time business relationships with foreign clients, based on quality and mutual benefits. ALEGROMEC can recommend trusted production companies experienced into the following technologies: - milling, form millings, deep hole drillings; - punching and pressing works; - laser cutting, plasma cutting; - combined forming laser and cuttings; - hydraulic punch press CNC; - different types of welding works; - sheet metal bending works; - drilling and boring coordinate works; - milling and grinding works; - mechanicals and hydraulics presses; - powder coating works; - sandblasting works; - galvanising works;

Power spectrum Toolmaking Our clients benefit from our years of experience. Through innovative tool concepts, the foundations for a low-cost production are laid. Developed and adapted to the process technology of our customers, we manufacture tools and equipment for a process-safe production. • pressing and hot pressing tools • stamping tools • laminating tools • deep drawing tools • Carpet-forming and Hinterschäumwerkzeuge • Forming / composite tools • Foaming • Special tools Mould Based on over 30 years experience we offer our customers an increasingly sophisticated and cost-effective solutions. Hullmann manufactures in Germany and France: • Foaming for molded foams such as seat cushions and backrests • foam molds for molded parts made of hard foam • Mehrnutzenschäumwerkzeuge for moldings Together with the equipment manufacturers, we deliver our molds worldwide. A team of engineers developed a convincing tool concepts for our customers. Thanks to the simulation of manufacturing processes, we are able to provide our customers with engineered solutions. The end of the manufacturing process, each mold is paid off in our laboratory to document next to the tightness of the finished part geometry, underlines the high quality of Hullmann. Model Models as decision support for designers are one of the first steps in our process chain. Only models with a vehicle can be considered realistic. Our machining centers enable us to be able to create complete cars in 1:1 scale. Whether cubing or auxiliary models for tool and mold making, the traditional team of model builders is one of the pillars of Hullmann. In model manufactured by Hullmann: • Working models for mold • Casting models • Teach (Prüflehrenbau) • Waterjetschalten Jigs and fixtures For the completion of individual process steps are often independent of the core process of working, used functional facilities. Whether Hochpräzisionsbohrvorrichtungen for aircraft construction or installation and / or Komplettiereinrichtungen for the automotive industry. The necessary devices are realized by the configuration according to customer specification, through to operational handover of Hullmann. Examples: devices ... • ... for the assembly and joining of different, belonging together components in the grille assembly. • ... for the insertion and braces retainers in the vehicle floor carpets • ... for the production of a component following converting, to produce variants (RL / LL or gasoline / diesel) of a basic component Punch presses and thrusters Specially designed for use in conjunction with Hullmann punching and forming a lighter and less expensive pressure transducer was developed. The hydraulic control of the pressure transducer is designed for safe press control with safety block and monitored valves and follows the latest UV and VBG regulations.The CE marking and the corresponding Declaration of Conformity is self- The machine base is strong even in the basic version. In addition to a light curtain on the operating side of the pressure transducer and sitema clamping heads for safety and comfort during operation, the control system is constructed on the basis of a PLC SIEMENS S7. It can be completed on request with different visualizations in the add-on package.

TOS Outsourcing is a renowned and reliable supplier and partner in outsourcing for machining (conventional and CNC turning and milling work), welding, forging, casting (metal and synthetic materials), extrusion, recasting, separating, preserving and assembling of large and small series.

Since 1860 is Ammann AG in Switzerland for a high quality and efficient processing of steel through to the light metal. Ammann AG offers machining forging certified welding and Shot peening. For this specific know-how mix, the development of competencies, which we make available to our customers arise. CNC MILLING Ammann AG is your reliable partner for CNC machining - especially when it comes to parts with high quality standards. We produce pre-finished components from solid or from forged or cast blank. We machine with our Machining Parts, which have up to 1.2 cubic meters per side and are up to 1000 kg. CNC machining with high cutting volume allows Ammann AG a very economical and precise machining. We are medium-sized and adapted to produce larger batches with the highest possible quality. CNC TURNING When CNC turning "off the shelf" parts are machined with a maximum diameter of 65 mm and a maximum length of 360 mm. FORGING Ammann AG is a traditional industrial company that produces high-quality in the weight range of 0.1 to 80 kg drop forgings. The company specializes in parts that are later exposed to a particularly heavy burden. There are specific components manufactured for international companies in the machinery and plant in all steel grades up to the light metal. CERTIFIED WELDING For many years, operates Ammann AG welding at the highest level. For the development and manufacture of welded structures, which are later exposed to heavy loads, or must meet high safety standards, Ammann AG is your experienced partner. The company is certified according to SIA 263/1 and EN 3834-2 H2. Welding according to DIN EN 15085-2 (CL1) Rounds off the portfolio in the welding of components for rail transport. After welding, the components are often not additionally treated mechanically.The combination of these methods allows Ammann AG a very versatile machining of components and assemblies CONSOLIDATION RAYS The Ammann AG has in the directed solidification of various components of practice-proven know-how and experience. Thus, developers and producers leave in motor racing at Ammann AG, to solidify heavy-duty transmission gears targeted. The parts are installed in Formula 1 and other motor sports car. Ammann AG may advise its customers very comprehensive, if metal parts are to be optimized in weight and durability. Our experts look forward to special challenges that arise in highly stressed components. The customer satisfaction and long-term customer success is our prime focus. Benefit from our experience in the development and manufacturing technology to your advantage! The Ammann AG supports its customers in product development, project management and procurement.

Wagner Zerspanungstechnik GmbH & Co KG and its participating companies produce iron and non-ferrous metals for various industrial sectors. Main product groups are: - Milled and turned parts - Aluminum die castings - Aluminum extrusion profiles - Stamped and extruded parts It can be used for small batches, prototypes and large series.

Fávecartec, lda's main objective is to understand the needs customers, providing services that meet their needs needs. For this, we have a highly qualified team competent, as well as the latest technological methods. We are a company providing services in the metallomechanical area, which aims to be recognized for its solidity and competence, both in national and international markets, as well as for all our customers and employees. Our desire to grow makes us challenge ourselves with enthusiasm and dedication to each project we propose. -CNC programming and machining 2.3 and 5 axis programming. -Erosion services. - Three-dimensional modeling. - Welding (MIG MAG / TIG). -Laser cutting. - Production, realization and adjustment of molds. -3D printing.

FMT-Fertigungstechnik was founded on January 1st, 2020 by Felix Schweers. Many years of experience in various manufacturing processes, both in production and in a managerial position, mean that there are hardly any limits to finding solutions in this area. Thanks to our good network of companies from various industries, we can offer a large number of manufacturing processes and ensure the required quality. In product development, we can draw on a wealth of experience through the implementation and introduction of our own patents - from the idea to the design, to the prototype and finally to the finished product. Advantages for them -Low program costs thanks to our own CAM algorithms -Low set-up costs due to a high degree of digitization -Fast production of individual parts -Shipping internationally -24/7 available

J&J Technologies designs and manufacturers a full range mechanical parts providing custom solutions with these goals on mind: high performance, reliability, simplicity and low-cost. We specialize in the production of high quality components for a broad range of industries, from packaging to steel industry. We have capabilities to make various milled and turned components with all kinds of materials -- from thermoplastics to high grade stainless steels. Our high performance CNC milling and turning capabilities together with high performance lathe centers are ideal for the production of short or long batch runs, enabling us to deliver high quality, with short lead times and lower costs. Our mission is to provide the best manufacturing solutions in the order of technological excellence at competitive pricing.

1) Core competence: Tool and mold for injection molding and die casting (automotive and non-automotive). 2) Tool order: There are 5 Injectionmachines for tool declines in house available (50to - 3200to). 3) wage labor: Milling: New Bettfräsmachine with 8m travel, 100to table load and 30to round table load for wage labor. Die sinking: 8Maschinen (Ingersoll and Makino) are also available for custom work available. 4) General: We are a family business that operates on two international market since 1979. We supply our customers worldwide with high guality spray and Druckgußwerkzeugen. Our high-performance tools zeichenen by short injection cycles. Total employed the Haidlmair Group about 500Mitarbeiter in 7Firmen with a total turnover of approximately Eur 60mio. The Company: HAIDLMAIR GmbH in Austria HAIDLMAIR North America in Toronto EMO Extrusion Molding GmbH in Austria HSC GmbH, mold in Austria HTM Kft, mold in Hungary HSCM, service center in Germany HAIDLMAIR U.S. service centers in the United States

We are a manufacturing company focused on long-term support of business processes and dynamic adaptation to market conditions. Our business relationships are based on partnership and trust. We specialize in the production of complex steel components in the field of mechinebuilding, automotive, mining and construction industries. We use modern technological procedures and are always in search of ways to further improve the processes. The experience and innovation of employees are a guarantee for quality products and services. We perform: - CNC plasma and flame cutting - Laser cutting - Metal sheet cutting with scissors - CNC bending - Tube and profile cutting on a bend saw - Mechanical metal processing(turning and milling on classic or CNC machines) - Metal fabrication - Colouring - Sandblasting

Diene production services Precision and experience. manroland is the world's second-largest press manufacturer with about 900 employees. The printing presses lives of precision. You can profetieren it, for manroland has many years of expertise as a world leader not only in sophisticated printing machines: Our professionals bring their years of experience with a manufacturing services for you. Quality testing and certification. manroland is certified according to DIN EN ISO 9001:2000 and DIN EN ISO 14001:2005. Annual audits ensure the honing demands on the processes safely. With our machines almost every feature can be verifizeirt professional manner. In addition, our laboratories provide materials analysis and Schlissbilder. Own foundry. The foundry with integrated model for large parts in Offenbach with an annual volume of up to 17,000 tonnes of cast iron saves valuable time in the match between model-making, foundry and manufacturing.For shorter lead times and lower costs for our customers. Diverse range of parts. From the lever through gears in Meisterradqualität to extremely heavy side walls, with tolerances of a few microns, thanks to a modern machine park. Also the production of any workpieces from batch size one is in the fast group everyday. Rotary bulk of production Rollers and cylinders. manroland offers the complete process chain for machining of cylinders and rollers: Turning, milling and drilling into a voltage on modern CNC machining centers and final grinding. There are also successful partnerships for gavanische surface finishing. Non-circular grinding. The special features of the machinery for rolling and the cylinder with appropriate controls is also the non-circular machining of precisely defined contours no problem. Prismatic large-part manufacturing Bulk of production.manroland manufacture components with size 2.2 meters wide x 2.5 meters long x 2 meters in height and weighing up to 2 tons. In the doubles table operating a processing to eleven meters in length. Our machines operate with a capacity of up to 100 kilowatts. Tools with a diameter up to 315 mm cutting depths allow con about 15 to 20 millimeters compared Gussverzüge and cast tension, with high-precision manufacturing of drilling intervals. Flat part manufacturing. CNC machine tools allow the highly efficient production of cubic flat parts with a machining of up to five pages in one setting. The machine tools are mostly equipped with special Ganauigkeitspakete ensure the highest quality for large component dimensions. Prismatic workpieces geometry primarily by complete machining on special parts that meet any of aluminum are in high quality requirements for CE-safety-related parts.For this we use a moderene five-axis machining round. Complete production Complete machining. The device construction, the tool engineering and CNC programming are aligned short response time for changes and new parts. Complex cubic workpieces are manufactured in several setups in multi-range operating on different processing centers: Small series of cast blanks with complex hole pattern and high quality requirements (up to it5) are among the references (levers, rails, slats and gear housing). Turned parts. Rings, flanges and wheels of medium dimensions are produced, but also gear shafts or special Exzentergleitlager with tolerance ranges of up to seven microns, including modern external and internal cylindrical grinding techno...

MB Fleksa is a CNC milling company

The company Ernst Zieker GmbH was founded in 1955 by Mr. Ernst Zieker. Since the year 1955, we produce for you Präzisionsdrehteile different type and form of the highest quality according to your data, drawings, sketches, ideas or ideas. A high degree of innovation, best material and market knowledge, as well as the famous the bigger matter of course for us. Our main areas are turning parts of the rod decreases. approximately 1,000 pieces per order, from 2 mm to 65 mm. Quality assurance is based on the ISO 9002 standard. 1997 an audit was prepared by an independent auditor (actual analysis for certification).

KOHR manufactures precision parts from metallic and non-metallic materials with a high level of vertical integration. We are customs certified and deliver our products worldwide.

QP Zrt, Qualitative Production Zrt., Győr, Hungary Our company, the Qualitative Production Zrt., Started operations in Győr in 1993, one of the most developed regions of Hungary's economic, logistical and technical aspects. Our company currently operates on three sites, about 12,000 m2. Our activity is closely related to the automotive and automotive industry. Our partners include almost all of the most important carmakers in the region. (Among our customers, we can know the key players in the automotive and automotive industry.) At QP's central site, we specialize in manufacturing and designing special-purpose machines, equipment, and parts, ranging from medium to large size ranges. This activity is carried out in two production halls on a total of three thousand square meters on conventional and CNC machines. The products are made on the basis of the design documentation provided by our partners or our own design. The strength of our company is the design and manufacture of clamping devices and manufacturing aids as well as the manufacture of tools and tool components. In 2014, we opened our second site where pre-machining of various cylinder heads is performed, typically using a lot of human resources. We are working on a continuous shifts in the 2000,000 square meter production area and 500 square meters of the Serial business. Our plant now extends more than a million pieces per year, but this capacity can be expanded on demand. Located in this production area, the 18th world class and state-of-the-art machining center, automatic washing machine and measuring machine are located. In 2018, the company's third, 6,000-m2 air-conditioned production hall was started, where automation is the key. Replacing manual loading according to the requirements of Robotics, Industry 4.0 and ISO14001 environmental certification, online production management, central chips and cooling water treatment, automated component washing and state-of-the-art control systems help you to work. We are at the service of our partners with various services. Such as special heat and surface treatment, the purchase of iron, aluminum, plastic, colored metal raw materials, the purchase of prefabricated, welded or forged items, machine chipping, commissioning and maintenance of equipment, and testing and complex measurement tasks performing. We have more than 15 years of experience in 24 hour service. For our contracted partners we are available non-stop, we can immediately replace the parts that are defective on the production line. Our company has been operating ISO quality assurance since 2002 (ISO 9001: 2008), and in 2014 we have also obtained the highest certification of international automotive quality management system (ISO / TS16949). At QP Zrt, we employ nearly 250 people, ensuring the family's livelihood. Our staff are highly trained and motivated professionals. Our company contributes significantly to the innovative economy of Győr. We put great emphasis on environmental protection, while keeping the strictest specifications in production. It is important for us to be socially involved, therefore we support local cultural life and through our foundation the most successful students of one of the schools in Győr. Among our plans is our company to become a first-tier (label: TIER1) automotive supplier. Our future goals are based on quality professional service besides business confidence.

Well-established supplier for individual parts or small series with high requirements, high added value or critical parts. Since its inception, the company has applied the most advanced production controls and methods. With its highly qualified staff, the management guarantees the quality of its products and has an ambitious quality system. The mainstays of the system include the use of the most modern production methods and controls as well as the continuous recruitment of highly qualified personnel.

Microtecnica Trevisana is a leading manufacturer of precision turned small metal parts, accessories for radiators, precision turned parts, ball bearings and mechanical components. Microtecnica Trevisana is an automatic turning for the production of turned parts. We have sevral multi-spindle lathes machining brass and automatic steels. Our capacities consists of 45 multi-spindle lathes (8 spindles) with pick-up, stop-spindle devices and CNC slides. Our capacity list includes: - TAJMAC MULTI-SPINDEL (MORI-SAY 8/32, 8/42, 6/20, 6/25, 6/42) - TAJMAC MULTI-SPINDEL CNC (TMZ 8/67, 6/42) - SCHÜTTE MULTI-SPINDEL (AG-20) Since 2006 we have been installing 6 TRANSFER machines (BUFFOLI E GNUTTI) to increase our capacity and meet with the more and more complex customers' requirements. Moreover, in order give a full service to our customers, our production includes: - 2 IFP washing machines (ultrasonic washing with modified alcohols) - Automatic equipment to assemble o-rings and other components - 1 automatic line for the creation of blisters - 1 automatic line for assembling and labelling of boxes - 1 vibrating machine RÖSLER to improve the surface finish of the parts Materials The tipically machined materials are: - BRASS (CW614N, CW617N, CW612N, CW602N, CW625N, CW626N, CW510L, CW511L, Ecobrass, etc.) - Automatic steel (11SMnPb37, 11SMnPb30, 11SMn37, 11SMn30, 36SMnPb14, etc.) Tools and instruments: While producting, the following instruments are used: - 2 sorting machines DELTA VISIONE; - 2 optical measuring machines KEYENCE; - CENT gauges with digital output data; - MICROMETERS (0-25 and 25-50) with digital output data; - TOOLS FOR MEASURING holes and threads (GO-NOT GO GAUGES); - COMPORATIVE digital gauges for special measurements; - DIGITAL and ANALOGIC TOOLS for the measurement of gorges; - INSTRUMENT FOR ROUGHNESS MEASUREMENTS; - SMARTSCOPE FLASH OGP (optical machine).

Customizing Solutions

Natec is your partner, from development to series! Both large corporations, as well as growth-oriented Mittelstaender. Whether the market leader in the industrial or service, or those who want to be. Our clients come from all sectors of the economy. In order to meet the current needs and demands of the market, we can provide tailored solutions for your business. We take care of the complete supply chain: planning, procurement, quality testing, warehousing and transportation. For years with much success, as our ever-growing customer base proves. As a service provider with its own production and development, we have the know-how and have the right partner for cost-effective procurement and flawless logistics. The basis for the positive development of recent years is the interaction of these flexible partner and our motivated employees, the resulting rapid Arbeitsablaeufe, a competitive pricing strategy, and of course the central storage at Natec. Our production partner here in Turkey are medium-sized family, far from the expensive and congested mass manufacturers. We know our partners for years and appreciate their design and manufacturing expertise. Through a comprehensive supplier management system is at all times the best supplier opted and appointed for your product. These are continuously tested for quality, delivery and price down. We and all of our manufacturing partners are ISO/TS16949 9001:2008 or DIN ISO: 2009 certified. You always have the possibility here to visit the production facilities in Turkey and to form a personal impression of the technical equipment, processes and working conditions in the respective producing for companies. Your benefits at a glance: - Reducing your supplier through Central Shopping on Natec - This reduction in the planning and control effort in your purchasing department - Cost optimization through market-based purchasing and delivery by bundling - Providing the highest quality in accordance with DIN ISO 9001:2008 / ISO / TS 16949:2009 - 100% delivery performance through warehousing - Short delivery times The satisfaction of our customers is our top priority, so us a trusted and personal contact is so important. Contact us for your strategic partner in Turkey!

We offer solutions from a single source: - Mechanical engineering - Manual, pneumatic and hydraulic clamping devices - Assembly equipment and devices - Testing systems for geometry, tightness, flow - CAD design (Autodesk Inventor and WSCAD) - Control technology (Siemens Simatic and others) - Item production

Welcome to 3D Path CNC . We are a leading provider of CNC machining services for a wide range of industries including; automotive, medical, communication, renewable energy, agriculture and more. Our state-of-the-art facility is equipped with the latest CNC machines and technologies, enabling us to provide precision parts and components with exceptional accuracy and speed. The company has grown organically in Poland based on the experience of our engineers acquired working for top industry leaders the UK, Germany and Norway. Having made a significant investment in our machine park we are now looking to expand to different European markets.

We provide CNC machining services - milling, wire cutting, turning, tool services, injection molds, blanking dies, stamping. CNC Milling: + GF + Mikron VCE 1600 Pro - 2017, 1600x900x800 + GF + Mikron VCE 800 Pro - 2015, 800x500x540 DECKEL MAHO - Reisen X, Y, Z 1400x600x500 CNC Turning: Haas SL-30THE - Flug fi 76 - max fi 432mm L max 864mm wEDMWire cutting: + GF + CUT 300SP - 2016, 550x350x400 + GF + CUT 300SP - 2017, 550x350x400 www.firma@cncpartner.com.pl

Since 1985 Tecno3 s.r.l. performs precision machining such as milling, boring and turning on mergers and on steel structures, stainless steel, aluminium, cast iron, bronze and other alloys. Examples of machined components: Gearboxes for lifts, reducers for marine, rail regulators V-belt pulleys Carter lift brake Flywheels, brake drums Stands for automatic machines or for machine tools Water pump bodies, oil pump bodies Bodies for hydraulic brakes, hydraulic distributors Boxes clutch, gearboxes Spare parts for mining excavators, spare parts for tractors Parts for robotics, Piston rod, CNG compressor, Etc. All machined products by Tecno3 s.r.l., are checked with 3D measuring machine and it can be released the audit report on request.

Cutting-edge technology, comprehensive project management and support The Helmut Klingel GmbH is specialized in the processing of difficult materials (stainless steel, glass composite alloys, titanium, special metals) and the production of components with complex geometries. In our modern machinery with more than 87 CNC lathes, 53 CNC milling centers and 8 wire EDM machines by machining components can be manufactured 500 mm are produced with an outer diameter of 3 mm to 250 mm and with dimensions of 300 x 400 x. Our core competencies "Rotate" milling "and" wire erosion "are optional assembly and customized logistics complemented by a comprehensive consulting service. Additionally, we offer a variety of other technological processes, such as surface treatments and coatings. We handle and process: # All stainless steel alloys (suchAs 1.4301, 1.4307, 1.4404, 1.4571) # Glass composite alloys (such as Kovar, Vacovit, Ni-Fe alloys) # Expansion alloys (such as Invar) # Titanium and titanium alloys # Copper and copper beryllium # Special metals (such as Monel, Inconel, zircaloy, Hastelloy) # Plastics (such as PEEK, POM) The Helmut Klingel GmbH produces: # Components for dental implantology # Sensor components # Amplifier enclosure for fiber optic data transmission # Components for endoscopes # Modules for positioning What we also offer more

• Surface treatment of any kind: galvanized surface finishes, sanding, polishing, tumbling, etc.
• Erode
• All heat treatments
• Laser Marking: Datamatrix, barcodes etc.

We have the claim to process your parts in the highest quality. That is why each task is implemented individually, quickly, flexibly and reliably. Through state-of-the-art machining centers as well as highly trained and motivated employees, we offer complete machining for individual parts up to medium serial volumes (small series). For complex geometries, demanding multi-side machining (5-axis machining) and tight tolerances, we feel comfortable. Our production is fully air-conditioned. We stand for customer orientation, speed, reliability and flexibility. With our CAD system all common data formats can be processed. Our production process is constantly monitored and documented by an integrated, finely air-conditioned measuring room.