5365 Suppliers found
List
Raster
Map
Sorted by 

    Watch

    PMT GmbH

    Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials. We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more! We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2005
    Certifications
    ISO 9001:2008

    Watch

    WKK Kaltbrunn AG

    WKK Kaltbrunn AG - enormously in form The beginning of the WKK Brunn AG is founded in 1967. As a dedicated tooling the company had at that time only one purpose: the production of cutting, bending and forming tools. Shortly thereafter, the fabrication shop was put into operation and some ten years later, the company introduced her first own product. By continuity, innovation and perfection was out of the formerly peaceful Toolmaking a successful SME with about 45 employees.Today, the CHP is an international punching operation with most modern manufacturing methods in the supplier sector. enormously complete - from the first idea to the final series, we offer comprehensive services - Consulting: individual and professional, on-site or at our - Construction: in-house with 3D Autodesk Inventor - Prototyping: short to illustrate your ideas - Tool: for punching tool and teaching building, with modern machinery - Series production: stamping products of all types up to 250 tons of pressure and up to 300 mm width at 3 mm thickness (up to 5 mm after consultation) made of steel, stainless steel, non-ferrous and light metals - Component manufacture: Total manufacturer of your products, automated assembly - Post-Processing: Heat and surface treatments for partners near - Finish machining: by machining (milling, turning, drilling), eroding and vibratory finishing - Did you know? Also welding
    > Read more
    Employees
    20 - 50
    Year of foundation
    1967
    Certifications
    ISO 9001:2015

    Watch

    Aquacut Kft.

    Unser Unternehmen begann seinen Betrieb im Jahr 2003 mit dem Wasserstrahl-Schneiden. 2009 haben wir als erste in Ungarn unsere Wasserstrahl-Schneidemaschine mit einem Kippbarem-Kopf auf den Markt gebracht, der bei einem Betriebsdruck von 6000bar arbeitet. Aufgrund der wachsenden Kundenanforderungen haben wir auch das Fräsen in unser Profil aufgenommen. Mit unseren CNC-Bearbeitungszentren ist auch die Herstellung hochpräziser und genauer Teile kein Problem. Mit unserem hochmodernen Plasma-Schneider können wir fehlerfrei bis 6000 x 2500 mm Maße schneiden. In unserem Sortiment haben wir Platten aus Stahl, Edelstahl und Aluminium von 1 mm bis 100 mm Dicke. Im Jahr 2020 haben wir die Zertifizierungen EN 1090-2 EXC 2 und EN ISO 3834-2 erhalten, die von der SLV Hannover zertifiziert sind. Unsere Präzision und das Fachwissen unserer Kollegen garantieren die einwandfreie Qualität der von uns hergestellten Stahlkonstruktionen, Geräte und Teile. SEIT 2003 SCHNEIDET AQUACUT KFT. verschiedene Materialien mit Plasma und Wasserstrahlen. Wir waren die ersten im Land, die eine 6000bar Schneidemaschine in Betrieb genommen haben. AUFGRUND DES SCHNEIDENS MIT DEM WASSERSTRAHL ändern sich die Zusammensetzung des Rohmaterials und die Gitterstruktur während der Bearbeitung nicht. NEBEN DEM WASSERSTRAHL- UND PLASMASCHNEIDEN gehören auch das Fräsen und Schweißen zu unserem Profil, für das wir zwei Bearbeitungszentren haben. WIR BESCHÄFTIGEN UNS SOWOHL mit kleinen als auch mit großen Schneide-Stückzahlen und entwickeln unsere Anlage ständig weiter, um den Bedürfnissen unserer Kunden besser gerecht zu werden.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2003
    Certifications
    DIN EN 1090

    Watch

    TASKIRAN MAKINE IMALAT SAN. TIC. LT...

    TAŞKIRAN MAKINE was started its production in 2009 with the aim of making machinery. We are working with 8 machines in closed 400 m working area in 2018. By 9-member staff is innovative and customer-focused. The principle of working is innovative and development oriented in the machine sector
    > Read more
    Employees
    10 - 20
    Year of foundation
    2009
    Certifications
    ISO 9001:2015

    Watch

    LSK Stanz- und Presswerk Lindner GmbH

    LSK Lindner manufactures stamped / bent parts and sheet metal components. In the field of metal forming, we accompany our customers from the first idea through project planning and engineering, construction and tool making, prototypes and initial sampling to series production and spare parts supply. In addition to punching / bending technology, CNC sheet metal processing (laser cutting, nibbling and bending) and welding techniques (with robots and manually) are used in production, depending on individual requirements.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1957
    Certifications
    ISO 9001:2015

    Watch

    Rehm Blechtec GmbH

    Metalworking The manufacture of fabricated metal products for innovative industrial applications requiring the highest standards of quality and absolute precision. to have a reliable partner on the side is more important. Rehm BlechTec has over 25 years specialist in metal and sheet metal processing. Our manufacturing techniques and lasers punching, forming, tube processing, welding and surface treatment is as much as the design and development of customized solutions. For the high-quality metal processing, we have an extensive range of machinery with modern equipment.
    > Read more
    Employees
    50 - 100
    Year of foundation
    2003
    Certifications
    DIN EN ISO 3834

    Watch

    SBS Group

    We, the SBS from Aalen, have been offering - in the truest sense of the word - precision in series for over 35 years. Founded by Friedrich Bollheimer, the company is now in the third generation. SBS combines the individuality and flexibility of a family business with distinctive technical know-how and the latest CNC production technology in the areas of turning, milling and assemblies. We provide our customers with advice from the manufacturer's point of view, from the prototype to the series of component parts, via an efficient supply chain. In addition to our high-quality machinery, we also have an assembly department. In addition to the production of precision components from prototypes to series parts, we take on complete process chains for our customers through to the implementation of system solutions. This enables us to offer you ready-to-install solutions. TO PLAN. TO DEVELOP. TO EDIT. TO USE. SBS.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1985
    Certifications
    ISO 9001:2015

    Watch

    Aloys Kleier GmbH & Co. KG

    The owner-managed company Aloys Kleier is a service company in the field of small-scale component manufacturing, hardware and electrical installation. As a cooperation partner of the industry, we bring by screws, rivets, welding and gluing together on 4000 m² of production space, what belongs together. In addition, our staff have many years of experience in the fabrication and installation of staircases, ramps and railings, pipelines, metal and welded constructions of all kinds Our range of services is complemented take over all activities of a classic Metallic, ie including sheet metal and metal processing including welding, Kant, drilling and sawing and we done quickly and efficiently. The customer gets to us all from one source. We service the products from purchasing to warehousing, manufacturing, assembly, logistics and all emerging problems. Flat hierarchies fast communication and flexible production methods are guaranteed. All orders we carry uncompromising from the complete satisfaction of the client. Partnership based on trust and maximum quality form the common success for both sides and are the basis for a long-term cooperation.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1982
    Certifications
    DIN EN 1090

    Watch

    Hermann Sefranek GmbH & Co. KG

    The company Hermann Sefranek GmbH & Co. KG was founded in 1885 and is now run by the fifth generation. The company is specialized in sheet metal processing. The product range includes parts for suction, ventilation systems, pipes, special sheet metal parts and weldments. The possible processing methods include laser and plasma cutting, punching and nibbling, edges, and much more rounds Are processed steel, stainless steel, aluminum, titanium, copper, and other materials. We are happy to advise you in the design of components or construct them for you. With SolidWorks 2010, we have a powerful CAD system with which we can process all common file formats.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1885
    Certifications
    DIN EN 1090

    Watch

    Bileske GmbH

    We are manufacturing service providers for precision parts in the field of machining technology, as well as the related services. On-time delivery and compliance with the cost factor are a matter of course for us. Our customers, who have been completely satisfied for years, also trust in this. Individual and prototype or serial parts made of any material can be manufactured using modern technology according to customer requirements. Our goal is always to implement projects with the customer quickly, precisely and efficiently. A constant expansion of the machine park and the cooperation with the cooperation partners guarantee mass-blown solutions for the individual requirements of the customer. What can we do for you? We will be happy to make you an offer!
    > Read more
    Employees
    20 - 50
    Year of foundation
    2022
    Certifications
    ISO 9001:2015

    Watch

    Sunway Precision GmbH

    We offer industry-leading service in hydraulic pumps / Valves / Motors, High precision shafts, assembly abilities and the total solution. Our goal: - perfect results - satisfaction of our customers Due to the "short distances" a fast processing of your request is guaranteed. If your contact person is out of the office, your request will be processed by a competent colleague. We will not let them stand outside in the rain.
    > Read more
    Employees
    200 - 500
    Year of foundation
    2018
    Certifications
    IATF 16949:2016

    Watch

    RICH Praezision GmbH

    RICH Precision means that we manufacture for you absolutely precisely and of high quality. We specialize in the manufacture of precision turned parts and the manufacture of complex workpieces that are manufactured on turning and milling centers. The assembly of assemblies is taking up more and more space.
    > Read more
    Employees
    20 - 50
    Year of foundation
    Certifications
    ISO 9001:2015

    Watch

    Monocraft Privet Limited

    Monocraft private limited is engaged in manufacturing and supply of a wide range of forging and precision machined components globally. Majorly we deal with Stainless steel, Carbon steel, Mild steel, Low carbon steels, Alloy steels, Aluminium and Brass. On top of that we are always happy to serve custom made solutions on the bases of each need in particular clients. Our capable workforce is complimented by a state of art infrastructure. We have forging, machining, Measurement and Quality management facilities to test our products on well defined quality parameters. In order to keep up with the growing demand we expand our capabilities to various Industrial sectors like Automotive, Railway, Defence, Aerospace, Heavy engineering, Earth Moving, Gear and Transmission, Agriculture, Marine, Electric transmission, and Industrial machinery equipment. Monocraft private limited and Monocraft forge is a development partner manufacturing unit. We provide custom made solutions in a cost effective manner. Our quality standards have made us an ISO 9001:2015 TÜV RheinAland certified organisation. Monocraft Private Limited has a sister concern company namely Monocraft Forge, This company is dedicated for the forging work and it has owning by a single owner who govern the Monocraft Private Limited.
    > Read more

    Watch

    M.D.M. srl

    M.D.M. was founded in 1996 operating in the automatic turning sector. In 2001, adapting to market requirements, it settled in its current headquarters in Bastia di Rovolon, completely renovating its machine park to dedicate itself exclusively to C.N.C. technology, specifically 3/4/5 axis turning and milling. A metrology room is also set up which, equipped with the most modern measuring technology, guarantees the quality of the finished product. M.D.M. is therefore able to provide a certification of conformity of the machinings performed for those Companies that require the Free-Pass delivery system. MDM also makes use of a Cad-Cam station, to design and draw any detail according to the specific needs of each customer. Our ambition is always to give the maximum professionalism, to give life to your ideas.
    > Read more
    Employees
    5 - 10
    Year of foundation
    1996
    Certifications

    Watch

    Diedecke Innovation GmbH

    We are your contact for innovative product development and manufacturing in the field of mechanical engineering, metal processing and metal construction.
    > Read more
    Employees
    5 - 10
    Year of foundation
    1997
    Certifications

    Watch

    Ernst Reiner GmbH & Co. KG

    PEOPLE WITH EXPERTISE AND EXPERIENCE As a customer, you benefit from our generation-spanning experience and high quality awareness our specialists, which they continuously pass on in the company and in training. When it comes to tightest tolerances, complex geometries and demanding surfaces, REINER is your contact partner. ZINC DIE-CASTING With zinc, extremely filigree or thin-walled, technically high-quality parts can be cast and a very high degree of accuracy is achieved. In addition, zinc die-casting guarantees high productivity even with small quantities and, thanks to its durability, is a very interesting economic process. At our location in Furtwangen, zinc die-cast parts with a part weight of up to 700 grams cast in die casting machines with a clamping force of 5 to 125 tons. With a maximum clamping area of 400 x 600 millimetres, we cast the alloy Z410. MIM - Metal Injection Moulding In series production, MIM opens up completely new technical possibilities - right up to highly complex geometries and always with optimised cost-effectiveness. Cross holes, internal and external threads, gear teeth and surface structures are easily integrated into the component by MIM. The process combines the freedom of plastic injection moulding with the properties of metals. At REINER, a selection of low-alloy and stainless steels is used here. PRECISION CUTTING with forming technology In the field of precision stamping and forming technology REINER offers a range of processes and technologies for high-precision stamped and bent parts. Fine punching, hydraulic bending processes, NC punching or NC bending are as much a part of this as laser cutting. ASSEMBLY SERVICES Thanks to our expertise and range of services as a specialist component manufacturer, we can also process complete assemblies, partially assembled assemblies, components, system assemblies and assembled individual components for you. A unique selling point of REINER in component assembly is the vertical range of manufacture, which starts with the sketch plan if required. In the in-house development center, engineers are available at CAD stations to work out plans and transfer them seamlessly into the production of the components. TOOLBUILDING We are your partner for mould making, precision stamping tools and devices. The equipment: - CAD / CAM for design and production - sink and wire eroding - Surface, profile and jig grinding - Most modern CNC programming technology - HSC milling - Coordinate measuring technology for form and pattern measurement - Centres for machining - Services from the design to the finished component. In addition to the design and manufacture of tools and devices, we carry out maintenance and repairs ourselves.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1913
    Certifications
    ISO 9001:2015

    Watch

    TPS Technitube Röhrenwerke GmbH

    TPS Technitube Röhrenwerke GmbH is a highly diversified and customer oriented manufacturer and stockiest. Always keeping the client in focus, we deliver high quality tubular piping products and accessories. Being a privately owned company with a highly experienced staff, you can rely on us to find quick and cost effective solutions for your requirements. From state-of-the-art production mills and stocks we deliver first class steel products in a wide variety of grades and executions. Clients from many different industries rely on our core values: quality, service and flexibility. Highest quality is achieved by blending our 40 years’ experience with modern production processes and only first-class material. Our skilled staff is ready to go the extra mile and offer a vast range of service: from tailor made packages to immediate deliveries everything is possible. Highest flexibility is a result of our strict customer focus. Be it big projects or small quantities, standard or customer specific executions, immediate delivery or quick mill lead time: we understand your demands.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1975
    Certifications
    ISO 9001:2015

    Watch

    Raskopf GmbH

    We, the Raskopf company, have been working in tool and mold construction at our location since 1923. It all began with forging dies for the massive forming industry. We have been manufacturing permanent molds for aluminum casting since the 1990s. Here, the production of molds for car wheels has become a special focus of our company. In recent years, however, the proportion of other cast aluminum molds has grown steadily. Our sales markets are Germany and the EU, e.g. Denmark and Austria.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1920
    Certifications
    ISO 9001:2015

    Watch

    Ansla Science Technology Co., Limited

    Ansla was found as we want to make better quality goods and services for customer, we have very professional team and precision production & inspection equipment. All of stuffs have over 10years in the metal and plastic product field, They are dedicated and passionate, can provide professional products, manufacturing services, and can quickly respond to any guest's problems….
    > Read more
    Employees
    50 - 100
    Year of foundation
    2019
    Certifications
    IATF 16949:2016

    Watch

    Blechform24 GmbH

    We are a young plate processing center in the heart of Saxony and edit sheets up to a length of 4000 mm and a plate thickness of 25.0 mm. Our services for you: - Laser cutting, - Folding, - Threading, - Sinks, - Drilling, - Welding, - Turning, - Milling and - Powder coating
    > Read more
    Employees
    20 - 50
    Year of foundation
    2011
    Certifications

    Watch

    JOBO Spezial-Maschinen GmbH

    JOBO Spezial-Maschinen GmbH was founded in 2012 at the Vechta location. A manufacturing facility with an associated office building was built here in 2015. As a young company, JOBO would like to establish itself as a manufacturer of machines for the national and international market in the near future. Particular attention should be paid to the optimization of existing and the development of new concepts for machines for use in swamp or moorland areas. In addition, JOBO will deal with systems and equipment for the oil field industry, pipeline laying and controlled drilling technology. JOBO will work out the customer-specific special solutions that are often required here together with the respective customers. JOBO's range is supplemented by the areas of procurement and trading of equipment and devices from the above-mentioned segments on the international market. JOBO employees with the necessary experience in the respective specialist areas are available to implement all of these tasks and goals. In the future, JOBO will continue to supplement and expand the workforce with competent employees. JOBO hopes to be able to offer young people an apprenticeship position in the future
    > Read more
    Employees
    5 - 10
    Year of foundation
    2012
    Certifications

    Watch

    IMV Reinhardt

    We have specialized in the production of individual parts and small to medium series in a wide variety of areas. No matter whether small or large companies, we manufacture according to plans and wishes of our customers and deliver versatile products with maximum precision and flexibility. Current controls and programming systems characterize our know-how.
    > Read more
    Employees
    5 - 10
    Year of foundation
    2016
    Certifications

    Watch

    CADYOU

    CADYOU Development and Construction was founded in 2008 and is successfully active in the construction and manufacture of special machines and devices. (CATIA, SolidWorks, Inventor) Contract manufacturing of individual parts and assemblies is a very important part of our company. The very motivated and highly experienced designers plan and construct their sophisticated special machines and systems. You get everything from a single source! Equipment and devices are designed and manufactured by us! We have welding workstations and are able to offer processed welded assemblies. we have 4-axis machines and can therefore manufacture complex parts. Our business model allows us to offer you very sophisticated solutions at very low cost. ask us! You will immediately receive a non-binding offer. We look forward to cooperation.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2008
    Certifications
    ISO 9001:2015

    Watch

    INDUSTRIALTECH SRL

    Industrialtech supplies structural components for earthmoving and operating machinery. The internal processes are: - assembly in dedicated product equipment - manual MIG / MAG welding - robotic MIG / MAG welding - max milling dimensions: y = 2000 z = 1500 x = 10000 (mm) - dimensional control
    > Read more
    Employees
    20 - 50
    Year of foundation
    2012
    Certifications
    ISO 9001:2008

    Watch

    Saar-Metallwerke GmbH

    The Saar Metall Group Reliable, individual, economical: We are specialists in the processing of copper, copper and aluminum alloys and selected steel materials. We forge and comprehensively master the mechanical further processing. You get everything from a single source - this saves you time and your project is completed quickly. All of our companies within the Saar-Metall Group offer you the same excellent manufacturing standard. In many of our areas, we are among the technological market leaders worldwide. Individual collaboration We accompany you in your project from the inquiry through the various production stages to commissioning. We either develop a new individual solution together with you or we optimize your suggestions. We can also bring components in existing systems up to date from an economic and production point of view. Broad industry expertise Our field-tested solutions help our customers to work efficiently in numerous industries.For example in the steel or automotive industry. We can certainly contribute our know-how to your industry. Long-term cooperation We attach great importance to a continuous and trusting cooperation with our customers. This includes being able to work with the same contact persons at the Saar-Metall Group for many years. The better we know your business, the better we can support you. And that makes it all the easier for you. Traditionally good. What we can do, we have been very good at for a long time. Saar-Metallwerke has been supplying the iron and steel industry in Saarland, Lorraine and Luxembourg since 1925. Today, the Saar-Metall Group comprises three operational companies at production sites in Germany and France.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1925
    Certifications
    IATF 16949:2016

    Watch

    KleRo GmbH Roboterautomation

    You would like to make metallic components additive? Are you interested in the possibilities of this technology? With the additive manufacturing of 3D-printing metal (SLM, Laser-cusing®, DMLS etc.) we offer you a production technology that is no longer used only in prototype production. This process offers completely new possibilities where conventional processes such as laser cutting, turning or milling reach their limits. This is a process that is used exclusively for the production of metal. As with 3D printing, the components are built up by layer-by-layer build-up and fusion of metal powder; the component has almost identical mechanical properties to the original material. You need support in implementing your automation project? Then you are exactly right with us! We realize complete manufacturing cells according to your idea. From the feasibility study on the construction and assembly to commissioning and on-site support, we are the right partner for your project. In particular, we cover the following areas of responsibility: - Project Management - Programming - 3D printing metal (additive manufacturing) - Security management - 3D scanning - Milling technology - Construction - Assembly - Hose packages - Service - Training Our 3D metal printing services at a glance: - construction work (cooling ducts, component optimization, etc.) - Checking the cooling channel design (flow simulation, thermal images, flow analyzes) - coatings - Plastic prototypes - Component measurement - Creation of plastic models - 3D scanning / reverse engineering - fine machining (milling, grinding, eroding etc.) - Surface treatment (anodizing, electropolishing, etc.) - hardening - welding
    > Read more
    Employees
    20 - 50
    Year of foundation
    Certifications

    Watch

    Maschinenbau Fegler

    It does not matter what kind of error or problem your system has. Our competent service team will take care of your matter. Our range of services from Remagen is very diverse. We offer the right solution for you, from maintenance to assembly service and CNC production to a wide range of spare parts. We will also help you in the field of special plant construction. We offer each customer an individual solution that is tailored to the customer-specific branch or industry. Because no area of application is like the other. Our technical know-how and innovative solutions ensure a great competitive advantage that is worthwhile. Take us to Ko
    > Read more
    Employees
    < 5
    Year of foundation
    2020
    Certifications

    Watch

    CNC Bearbeitung Christoph Ostertag

    Our core area is the CNC milling of prototypes, small and large series as well as precision parts. You can also rely on us at any time as a problem solver for quick orders. We rely on the most modern production techniques in order to implement your orders with the greatest possible precision and quality. A detailed and thorough inspection of every component is a matter of course for us. State-of-the-art tools and our 15 years of experience enable us to produce your orders cost-effectively with the highest quality and delivery reliability. Our goal is to provide you with the best possible support in your project, with flexibility and speed being a top priority.
    > Read more
    Employees
    5 - 10
    Year of foundation
    2011
    Certifications

    Watch

    Schlosserei Majerus GmbH&Co.KG

    > Read more
    Employees
    10 - 20
    Year of foundation
    1986
    Certifications
    DIN EN 1090

    Watch

    L+M AG

    At L + M, every customer will find their own “menu”! Whether contract manufacturing, either carried out in Switzerland or Slovakia, or overall projects from advice to the installed product. L + M = A la card - customer in focus! No matter how you decide, you will receive personal advice from us, the person responsible for sales remains your personal contact person until delivery. Market services: our competencies - your benefit Advice: We develop solutions from one source based on your ideas and needs. Engineering: proof of strength / FEM, 3D-CAD and conformity according to MRL 2006/42 / EG Production: series, tools and special constructions up to 15t or 9mx12m Production: locations in CH and Eastern Europe (> 4'000m² production and storage area) Welding technology: Our SFI + SFM guarantee welding quality at the highest level for steel, stainless steel and non-ferrous metals Quality: Evidence according to EN473 / ISO9712, customer approvals and project documentation Project management L + M Remigen: Excellent network of qualified partners and suppliers. In any case, we are your right contact from the region.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1962
    Certifications
    DIN 4113
Limit search by:
Region
Technologies
Materials
Company data
Industries
Certifications