486 Suppliers found
List
Raster
Map
Sorted by 
Go to watch list 0

    Watch

    AKON GmbH

    The AKON GmbH is an innovative company in the fields of automotive, suppliers and electronics industry and has several worldwide patented processes and components. AKON systems allow an increase in the quality of cleaning in industrial surface and parts cleaning. Benefit from cost savings through the elimination of rework and reducing the cleaning agents used. However, wet-chemical processes take place, thanks to our technology more cost-effective, environmentally friendly and effective, from. Faster production processes, finer etching structures and a reduction of water consumption are the outstanding advantages. The handling of hazardous substances (hydrogen peroxide) is reduced and the labor protection more than meets the requirements. This also proves the profit of the 9th German hazardous material protection Prize (awarded by the Federal Ministry of Labour and Social Affairs), which characterized the innovative AKON OXIjet technology for the protection of employees.
    > Read more
    Employees
    Year of foundation
    Certifications

    Watch

    Lesney Industries Limited

    Lesney Industries Limited specialises in the supply of high quality zinc pressure die cast components and plastic injection mouldings. We are a well-established independent company having of over 60 years experience in supplying to a wide range of industries including automotive, architectural hardware, healthcare, electronics and white goods working in compliance with the ISO 9001-2000 standard. DIE-CASTINGS Die-casting in zinc, we produce technically and aesthetically demanding components and can manufacture thin wall, high integrity castings using fine gating techniques on fully automatic machines with up to 200 tonnes of lock. We can cast up to 4kg shot weight in various grades of zinc alloy material to suit individual component needs. Tooling is designed in house for long life to produce precision castings, which are virtually flash-free requiring minimal finishing, even with screw threads. Subsequent machining, if necessary, can be carried out in our well-equipped machine shop and various finishes can be applied if required. PLASTIC MOULDINGS: Injection moulding facility has fully automatic machines with locking capabilities up to 400 tonnes. We can mould up to 1400 grammes in weight. Mouldings are supplied in practically all of today's thermoplastic materials and variants with rigid process control for moisture sensitive materials and consistency of specification and finish. We also can mould around inserts as and when required. Further information is available on our web site at www.lesney.co.uk
    > Read more

    Watch

    Season Components Co., Ltd.

    Season Components Co., Ltd. was founded in 1975 by its current managing director Mr. Patrick Hung. Patrick began in Hong Kong as a small shop owner, manufacturing wire harness assembly and battery connectors. From there, Season Components gradually expanded into other areas including PCB assembly, vacuum forming, metal stamping, plastic injection molding, and mold making. As part of our expansion, we built manufacturing facilities in Dongguan, China and Kuala Lumpur, Malaysia. Our sales offices are strategically located around the world to be in short proximity to our customers. This gives us the ability to provide customers with quick, personalized service. We are now recognized as a prominent manufacturer in today’s market for: mold & die making plastic injection molding PCB assembly Wire harness and cable assembly thin gauge and thick gauge vacuum forming metal stamping turnkey assembly .
    > Read more
    Employees
    > 1000
    Year of foundation
    1975
    Certifications
    ISO-TS 16949:2

    Watch

    OTB Oberflächentechnik in Berlin Gm...

    OTB is well-known as a job plater and manufacturer of machines for the electronics industry in Europe, and specialises in reel-to-reel surface plating and reel-to-reel surface cleaning for most modern technological applications.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1987
    Certifications
    ISO 9001:2008
    TP Suche Banner

    Watch

    COPARTNER TECH CORP

    Copartner Tech Corp comes from Taiwan. We are a reputable wires & cables company in Taiwan and we has been engaged in this field since 1987 and has been a leading manufacturer of cable and wire products. For almost 30 years experience, we supply products for information, automobile, communication and electronics industries and automotive around the world. We believe you will be satisfied with our products if you search for a reliable supplier in this field. Please find our company website (http: http://www.copartner.com.tw/index_en.php ) to know more about our company and products. We provide OEM&ODM services and customized products as well.
    > Read more
    Employees
    > 1000
    Year of foundation
    1987
    Certifications
    ISO 9001:2008

    Watch

    Dongguan Yaotai Metal&Electronics C...

    Our company is one of the leading stamping manufacturers in China with total area of 50,800 square meters. We are near Chang An Town, so the traffic is quite convenient.

    We specialize in various OEM metal stamping products with various surface treatments for 34 years. ISO9001:2000, ISO14000 and TS16949 by SGS quality control system ensure our quality keeping superior. As professional stamping manufacturer, we are dedicated to achieving superior quality through teamwork and continuous improvement.

    Idea and designs from customers can be realized into new products here confidentially. Any OEM metalwork is welcomed! We will deliver products and services that both anticipate and meet or exceed customer expectation. We are anticipating for establishing good cooperation relationship with the customers from whole world.

    Developing Yao Tai
    In 1974, Yao Tai was found at Kaoshiung, Taiwan. It mainly produces the precise metal moulds with consecutive pressing, cold punching moulds, parts and accessories for precise pressing.

    In 1992, inheriting the features of the processing industry of Taiwan and taking the local advantages of Mainland, we started our first branch DongGuan Yao Tai Metal & Electronics Factory at Dalingshan Town, Dongguan city Guangdong. Manufacturing of metal stamping and machined parts from various types of materials (Stainless steel, copper, beryllium, carbon steel etc) which are used as component parts for precision machinery, IT products and electronic equipment.

    In 2006, followed the matured stamping technology and management we opened SuZhou metal stamping factory branch, which is specialized in up to 43" wide LCD panel with automatic machine arms operation.
    > Read more
    Employees
    200 - 500
    Year of foundation
    1992
    Certifications
    ISO 14001

    Watch

    TRONICO

    Professional electronics contract manufacturer, TRONICO offers global services including design, industrialization, manufacturing and integration of printed circuit boards and electronic sub assemblies for small and medium series
    > Read more
    Employees
    200 - 500
    Year of foundation
    1963
    Certifications

    Watch

    Mack Alu-Systeme GmbH

    Decades of experience in the aluminum processing, innovative thinking and a lot of technical know-how have made the leading machining operation for long and large-volume aluminum profiles and structural components Mack Aluminium Systems GmbH. Demanding customers in the engineering, automotive, electronics and aerospace industries rely on our customized and individual solutions for years. Whether it is CNC machining or welding of aluminum, we have strengthened our high technical standards for the complete production of complete modules and for the assembly.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1960
    Certifications
    ISO 14001

    Watch

    Bosch Rexroth AG

    Bosch Rexroth AG, with its headquarters in Lohr am Main, is one of the world’s leading suppliers of drive, control and motion solutions. In over 80 countries the Drive & Control Company develops, produces and sells components and systems for industrial and factory automation as well as for mobile applications. With over 28,200 employees Bosch Rexroth AG achieved sales of approximately 4.6 billion Euro in 2005. Under the brand name of Rexroth the company offers all leading drive and control technologies from a single source. Whether hydraulics, electrics, pneumatics or mechanics – the teams are able to find a solution for every task, including cross-technology solutions. During the development process Bosch Rexroth utilizes the synergy potential by means of an intensive transfer of know-how among the different technological fields: hydraulics, electric drives and controls, linear and assembly technology and pneumatics, as well as offering a service network reaching beyond the limits of the specific technologies. Bosch Rexroth provides goods and services to companies in virtually every sector of industry. Around 500,000 customers worldwide put their trust in this supplier. Reference projects can be found in the automotive industry, the printing and paper industry, electronics and semiconductors, as well as the food and packaging industry, amongst others. Bosch Rexroth offers both individual and combined technologies, customer-specific systems and complete solutions, based on extensive consultancy and project design know-how. Optimization of resources for the customer is also a major consideration here. Bosch Rexroth AG is part of the Bosch Group. It was formed on May 1, 2001 from the merger of Bosch Automationstechnik and Mannesmann Rexroth AG. Under the parent company of Bosch Rexroth AG it thus combines experience and knowledge from a one-hundred-year-old tradition. Robert Bosch GmbH was founded in 1886; the history of Bosch Rexroth goes back to the year 1795.
    > Read more
    Employees
    > 1000
    Year of foundation
    Certifications
    ISO 9001:2008

    Watch

    Lucas components GmbH

    Supply of PCBs from prototype to series; boards of almost all technological levels; FR4 material (various qualities), metal core printed circuit boards; For series we have partnerships with Asian suppliers in connection with additional QA system. We have years of experience with deliveries to the automotive industry. The company Lucas also has its own development capacity of Mechanics and electronics, and an assembly area.
    > Read more
    Employees
    5 - 10
    Year of foundation
    1996
    Certifications

    Watch

    Unimer Plast & Gummi AB

    Unimer Plast & Gummi AB - Your supplier of hoses, sealing strips and rubber products. We offer you a complete range of hoses for chips, hot and cold air, vacuum and suction and hoses for many other applications. The range of sealing strips contains pile weather strippings, brush sealings and extrusion in solid, cellular rubber and silicone sealants. We also provide customer specific moulded rubber components together with a standard range of rubber products, particularly for the transportation sector. We have now a complete range in Antivibration elements for all kind of application - as general machine construction, construction machine, marin, electronics.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1974
    Certifications
    ISO 14001

    Watch

    Arjan Industries

    I on behalf of Arjan Industries take this opportunity to apprise about our Company which specializes in the manufacturing of engineering components for various Automotive and Electrical application that exactly meet the expectations of the demanding industry. The company started with the motto of producing quality CUSTOM Precision Turned/ Machined parts, almost 4 and half decades ago in 1971. Today we have more than 48 years of enormous experience in this field and we understand the importance of End Product Quality & Value. We work towards offering our Esteemed Clients the utmost Satisfaction. It would be our pleasure to make a long-term relationship with your company and serve you with our Exclusive Quality Products & Services. We hereby attach our short company profile for your quick reference. https://www.youtube.com/channel/UCrK-N8fCt3Awc3Lyy1tLnfA Site: - http://www.arjanind.com/
    > Read more
    Employees
    20 - 50
    Year of foundation
    1971
    Certifications
    IATF 16949:2016

    Watch

    Indutronic GmbH

    In March 1998, the Indutronic production and Dienstleistungsges was. mbH founded with its headquarters in Lübeck. The business segments are in custom development and manufacturing electronic boards, cable assembly and the Creation of complete, tested and customized packaged devices. As part of the requirement for high quality and global acceptance Indutronic made to national standards or according to the North American States. As an active member of the "FED - Association of Electronics Design" Indutronic uses the set criteria of the "IPC - The Istitute for Interconnecting and Packaging Electronic Circuits." A variety of products manufactured by us possess approvals according to standards such as UL-us UL or TUV c-us and TÜV-c, VDE. Indutronic has distinguished itself in an ever-reliable partner for its customers and thus takes on the part of success. This success led in April 2001 on the obligation of expansion with the newly formed indutronic Leipzig GmbH, based in Leipzig. We are pleased to provide you with a more modern production available that sets your innovative ideas no limits. Our range of services ... Design and manufacture of devices and Elektronikflachbauguppen Schematic capture and PCB layout Development services in the field of hardware and software as well as the construction PCB assembly, one or both sides, in SMD (SMT) and conventional through-hole technology (THT) Assembly of micro chip's from 0402 as well as fine-pitch in the grid> 0.3 mm and uBGA's As PCB base material we process except standard FR4 among other rigid-flex circuit boards, printed circuit boards and ceramic-based (aluminum oxide). These are equipped with SMT or THT and are suitable for use in medical technology, power electronics, microsystems technology, etc. Cable Assembly Processing of standard or custom built cable materials Connection of all connectors and sleeves Each cable assembly manufactured is tested for connection and short circuit freedom (Further testing on request). Complete assemblies and equipment manufacturing Joining techniques in rivet, screw, press-and adhesive technology Functional checks of the assemblies and devices according to your instructions Lacquer sealers for PCB assemblies for use in marine and Automotive, aerospace, telecommunications equipment for animal husbandry etc. Our service for your relief Complete material procurement and storage necessary Mustereildienst of printed circuit board assemblies and prefabricated Cable Making of documentation according to your specifications
    > Read more
    Employees
    20 - 50
    Year of foundation
    1998
    Certifications

    Watch

    Foradia S.A.L

    Foradia is a company with a trademark present at the machines-tool market for more than 50 years, where we have gained great prestige thanks to the well-known Foradia Radial Drill. Fifteen years ago, the team of Foradia faced up decisively to the challenge that the emergent technological revolution meant, by channeling an important volume of economic and human resources through our own Research and Development department (R+D). This department comprises a team of technicians and highly qualified specialists who have a permanent professional training. This effort has allowed us to develop Advanced Technology Projects in keeping with every client requirements. Over ten years we have been acquiring a great experience from a long time tradition as manufacturers of High Technology machinery. A Service Department has been created, as a consequence of an strategic reconsideration, with the aim of offering to our customers a wider range of Comprehensive Technical Solutions within the Industrial Engineering field, especially solutions related to the mechanics, pneumatics, hydraulics, electronics and CNC. Furthermore, the Service Department has expanded our working area. We have gone over the traditional machine tools sector and nowadays we are able to offer our services to all the Advanced Technology users by adding to our portfolio customers from sectors such us: textile, paper, food, toys, shoes, wood, glass, die-stamping, nappies and sanitary towels, etc.
    > Read more
    Employees
    Year of foundation
    Certifications

    Watch

    Haitian International Limited

    Haitian International Limited is a manufacture's representative, offer plastic injection parts, metal stamping parts and machining components to abroad with one stop service from design and prototyping to final production, assembly and quality assurance. Custom stamped and fabricated sheet metal components for automotive,electronics,telecommunications,medical,healthcare,aerospace, computer,business equipment and other key market. We are not only a seller, but also a partner for one who are intend to buy custom plastic and/or metal products from China for their projects. We are local, so we know Chinese manufacture better than you. Come on, we are your best vendor in China.
    > Read more
    TP Suche Banner

    Watch

    Gohard-Federnfabrik Gebr. Libuda GmbH

    Our company was founded in 1969 by Gottlieb and Gerhard Libuda, and is now continued in the second generation. We produce all kinds of technical springs Originally Sonderfederbau become large, we now cover almost all areas of metal forming from. From print, train and blade springs up to punching and bending parts we manufacture for the electronics, automotive, textile, medicine, toys and watches industry with an extensive range of parts that goes far beyond the area springs. With advanced machinery and production techniques, we provide you with affordable quality and know-how. Everything from one source
    > Read more

    Watch

    BMB di Berini F.&C. snc

    “BMB” was founded in 1987 by the company’s owner, Fulvio Berini, as a business for mechanical precision processing and the assembling of mechanical components. During the course of over two decades the business has evolved and expanded becoming BMB di Berini F.&C. snc, a company featuring an advanced technological structure located in the strategically important commercial area of Friuli Venezia Giulia: Fogliano-Redipuglia (Go) just a few minutes from the regional airport Ronchi, 40 km from Trieste, 120 km from Ljubljana and 115 km from the Austrian border, hosted in a 1,000 square meter facility fully equipped with a modern and competitive fleet of machines. The vicinity to the borders has facilitated BMB snc access to the European and international market during the years, working with internationally renown companies in Austria, Germany and England. Through turning (ø max di 610mm l=1050) and milling (z=1250, x=2000, y=800). BMB snc manufactures mechanical details like shafts, pins, wedges, supports, spacers, plates, bushings and flanges in the following materials: special annealed and hardened steel, sinterized steel featuring elevated hardness, aluminium and its alloys, iron, copper, brass, plastic, etc. Due to cooperations we are able to carry out all product treatments(p.e. thermical treatments) desired. These cooperations enable us furthermore the turning Ø 1000 x 3000 and milling of pieces up to 8000mm. The product range is directed to industrial fields such as refrigeration, food preservation, packaging, the oil industry and iron and steel metallurgy, ship building, mechanics, electronics and aeronautics in which the main objective is satisfying the customer’s specific needs. Our goal is a high costumer-satisfaction leading to long-term business-relationships. We would be pleased to provide you with all further information you may require. Don not hesitate to call +39 48 489628 or send an e-mail to info@biemmebi.com. We guarantee quality, speed and competitive prices for both national and international markets. For more information take a look on our website: www.biemmebi.com! We are interested to enter into regular business with you and are looking forward to recieving an e-mail with a tecnical drawing so we could provide you with an offer. Kind Regards, BMB di Berini F.&C. snc Foreign office Affairs BMB's Manager Mrs. STAUDECKER Elisabeth Mr. BERINI Fulvio
    > Read more
    Employees
    20 - 50
    Year of foundation
    1987
    Certifications

    Watch

    ForTest Deutschland GmbH

    Fortest designs and manufactures its leak testing and flow testing tools with care. They are modern, fast, reliable and traceable. Not only is ForTest committed to providing the most modern tools on the market, but its entire approach is innovative as the company intends to create synergy with its clients to provide them with turnkey solutions designed around their needs. ForTest designs and manufactures leak testing and flow testing tools. Always with an eye on innovation, since 2012 the company has been based in Modena in the former Maserati factories and boasts clients in Italy and around the world, working in many sectors, such as automotive, agriculture, oil hydraulic, irrigation, mechanical, electronics, biomedical and packaging. The new T series marks the evolution of the leak testers for the industry. A touch of innovation that fosters man-machine interaction thanks to the innovative tempered glass touch capacitive panel and other technological innovations that make the range, the natural evolution of the previous M series, the new benchmark for testing and proof brought.
    > Read more
    Employees
    20 - 50
    Year of foundation
    Certifications
    ISO 9001:2015

    Watch

    Technocraft Engineering Plastics

    Dear Sir, It is our great pleasure to introduce our company TECHNOCRAFT ENGINEERING PLASTICS, as one of the leading manufacturers of high precision Injection Moulds for Electricals, Electronics, Automotive, Medical Components, High precision Press-Tools, Jigs-Fixtures, High precision machined components & Import substitute items as per our clients requirements. We have a dedicated team of qualified and experienced engineers, highly skilled toolmakers and workmen. Our moulds, tools & dies are made to the international quality as we are committed to the pursuit of excellence in quality. We have at our tool-room sophisticated high quality precision machines. We have started our business since 1970 in India and have switched over to the International Market to give our expertise service to the world's leading Industrial Groups. Thanks a lot.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1970
    Certifications
    ISO 9001:2008

    Watch

    iMolding Deutschland GmbH

    We are Chinese company based in China and Germany. Our motto: top quality at Chinese prices. With about 180 skilled workers in addition to a qualified Inginieurteam we manufacture in China plastic injection molding and aluminum die casting, share and its associated forms, cutting and machining tools. Since our establishment in China in 1992, we exclusively focus on customer order and specialize in small and medium-cast. For our customers' industries include: Automotive, industrial electronics, mechanical and plant engineering, medical, instrumentation and consumer products.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1992
    Certifications

    Watch

    Göldi Präzisionsmechanik

    HIGH PRECISION FOR APPOINTMENT BASED DELIVERY We supply products of precision mechanics in the medical, electronics, aerospace, as well as in research and development. With over 25 years of experience and extensive know-how, we work with CNC controlled machine: aluminum, cast aluminum, brass, steel, stainless steel, glass, ceramic, titanium and plastics of all kinds, the focus is mainly in CNC turning, CNC milling and CNC drilling. Order known industrial companies in our prototypes, small and medium series of 20 to 1000 pieces but also mountable, complete assemblies. According to drawings or samples, we produce custom-made. Timely and high quality work is our commitment.
    > Read more
    Employees
    Year of foundation
    Certifications

    Watch

    Calmet India

    Value Added Services We supply high quality castings from around the world, dealing with reputable manufacturers. By making the resources of foundries all over the world available to you, CALMET is able to extend your manufacturing capabilities without the risk and cost associated with expansion, so you can have world-class castings at competitive prices. By using our experience and commitment to closely monitor the entire order fulfillment process, we have achieved an exceptional record of customer satisfaction. Our large global customer base can attest that we have succeeded over the years in maintaining consistently high quality at competitive prices. In addition, we provide a range of value-added services including:
    • Practical advice on casting requirements, choice of material, and foundry processes;
    • Regular monitoring of quality on the customer's premises;
    • Warning of impending difficulties, raw material price changes likely to affect casting processes, etc;
    • Constant updating of lead times and assistance with urgent delivery requirements;
    • Advice on casting liability, governing law and freight clauses.
    CALMET's end-to-end processes are very extensive. Experienced engineering professionals achieve the desired technical design, while our foundries handle molding, coring, melting & refining, heat treatments, quenching, and pattern making. Our finishing facilities provide various welding, fabrication, shot/sand blasting services, and both rough and final machining services. CALMET can provide complete quality and inspection services including magnetic particle testing, liquid penetration testing, ultrasonic, radiography, and coordinate measuring. Fully equipped laboratories are available for sand, chemical, metallurgical and electronics testing.
    > Read more

    Watch

    AccuPower Forschungs- Entwicklungs-...

    AccuPower - Company AccuPower's mission is to become a key market supplier of rechargeable energy devices and charging electronics. Our products offer a combination of performance, endurance and value. The technology of microchips, digitization and miniaturization creates a wide variety of new portable power needs. The combination of our batteries and chargers deliver the optimum combination of long life, high energy, convenience, low-cost and environmentally friendliness. The new NiMH battery serie excels with its high capacity and flat discharge characteristic. Providing a much longer period of stable voltage level. AccuPower batteries can be used in any application where long-lasting operation time is desired and/or required. It is ideal for applications such as cellphones, MP3 players, organizers, digital cameras, CD players, RC-models, GPS, and much more. They are available in all common sizes including 9Volt/6F22 types. We also offer micro-controlled, state of the art universal chargers capable of silmultaneous charging of different battery sizes and chemistries. Our R & D team works closely with OEM customers in the development of new charging and control devices. Please feel free to inquire with any special request you may have or if we can assist you with any questions. All AccuPower products can be purchased in Europe, North America and Asia. They are manufactured to the highest quality standards. AccuPower Research, Development and Distribution Company (Ltd.) Kärtnerstraße 87 8010 Graz, Austria Tel. +43 316 26 29 11 - 10 FAX +43 316 26 29 11 - 36 E-Mail: info@accupower.at Web: http://www.accupower.at
    > Read more
    Employees
    10 - 20
    Year of foundation
    1998
    Certifications

    Watch

    Shanghai Xindianshi Precision Machi...

    Shanghai Xindianshi Precision Machinery Manufacturing Co.,Ltd was founded in earlier 2001.It lies in Pudong New District,near from Waigaoqiao Free Trade Zone.By the end of 2006, the company has invested RMB1000,0000.00 to purchase the machinery plant and equipments. In 2007, the company has bought an estate of 9000m2 for expanding the manufacturing. In 2003, we have been certified with Quality Management System ISO9001. Now we are active to act as 5S’ management system. In the passed 6 years, we always act along with the idea “be a honest person, quality is the first”. Serving as the high quality product and high efficient service, obtaining more than 10 well-known enterprises in domestic and abroad. We have built the long-term cooperated relationship with many international well-known companys such as Honeywell,Parker Hannifin,SPX,Rosenberger,Flextronics, DASA electronics etc. In 2007 we establish the foreign trade department,active in developing the European and American market. Management range: metal precision machinery components and sheet metal parts in electron,electronical equipments,network & telecom and automatic control equipments Service range: including all sorts of machining parts ,such as control box , control cabinet and Some precision machining parts. Example: -processing CNC precision -components, Manufacturing all types of industrial assembly -mould and fixture.
    > Read more
    Employees
    50 - 100
    Year of foundation
    2001
    Certifications

    Watch

    Heidenhain-Microprint

    hmp HEIDENHAIN-MICROPRINT is a leading European manufacturer of high innovative Printed Circuit Boards. We belong to the DR. JOHANNES HEIDENHAIN group, the world wide leader in length & angle measurement. As a high-tech partner for our customers we are focused on value added and more complex PCBs, such as high-density boards, sequential built-ups, hybrids, high speed applications, chip-on-board technology and flex-rigid solutions. At hmp HEIDENHAIN-MICROPRINT we take great pride in supplying market leaders of electronic industry, medical electronics, telecommunications & automotive industry, all with high standards regarding quality, logistics, technology, environmental behaviour & stable economic perspectives.
    > Read more
    Employees
    Year of foundation
    Certifications
    ISO 14001

    Watch

    Bruno Geyer Werkzeugbau und Kunstst...

    The company Bruno Geyer tooling and plastic processing GmbH was founded in 1970 in Lower Moerlen / Bad Nauheim. We are suppliers to the industry and provide technical plastic parts and injection molds forth. Our design can assist you in developing your plastic items, please inquire with us. Test our price-performance ratio. According to your information, such as sketches, articles drawing, sample parts, or CAD files, we design and build you the injection molds, you also produce the parts to 340 g, so you get everything from one source. Toolmaking For the construction of tools and molds modern CNC-controlled milling and EDM machines are used. Focus of our toolmaking's is the production of plastic injection molds. We build precision molds for single and multiple interpretation, even with sliders, loose parts and hot runner. The production of plastic products also takes place in our home. Injection molding A to Z from a single source We advise you in developing your plastic articles, squirt QS (EN ISO 9000) and deliver on time. We inject all common thermoplastics such as: ABS, ASA, SAN, ETFE, PA, POM, PP, PE, PS, PBTP, PPO, PPS and PUR. The wide variety of industries such as Automotive, electronics, dental technology and optics take advantage of the cooperation with us. In the production of injection molded parts t tumbler and up to 340 g shot weight will work with electronically controlled injection molding machines up to 200. A production in the art and industry standard, guaranteeing a consistently high quality of injection molded articles.
    > Read more
    Employees
    Year of foundation
    1970
    Certifications

    Watch

    esw electronic service willms GmbH ...

    The electronic service willms GmbH & Co. KG (esw) is a manufacturer of electronic assemblies. Other focal points are the delivery system of LED lighting systems, electronic ballasts, and battery charging technology and micro web server applications. Founded in 1985 and based in Stolberg near Aachen has evolved from a manufacturing service early 90s to a system supplier and now works for well-known German and international companies in the electronics and automotive industries. For esw ar-work 125 employees to 3,000 square meters of production area.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1985
    Certifications

    Watch

    SIBALCO W. Siegrist & Co. GmbH

    Company Sibalco GmbH Sibalco W.Siegrist & Co. GmbH Käppelinstr. 12 D-79576 Weil am Rhein Tel 07621 78011 Fax. 07621 78013 e-mail: info@sibalco.de Internet: http://www.sibalco.de Sparkasse Markgraeflerland, Weil am Rhein Account number: 7133010, BLZ 683 518 65 Legal form: GmbH Purpose of the company: The manufacture of and trade in components for electrical, electronics, equipment construction. Focus fastening, connection technology. Delivery program: Standard, special turned parts made of brass, steel and stainless material (Distance, spacer, spacers, etc.) self-tapping steel screws (also stainless) for the dowel-less installation in concrete or other solid materials Distance, spacers and sleeves made of plastic Plastic parts for assembly and mounting Year of establishment: 1990 Capital: DM 100,000 Geschäftsf. partner: Mr. Werner Kalusok Affiliated companies: Sibalco AG, Birmannsgasse 8, CH-4009 Basel, http://www.sibalco.ch Quality Assurance: ISO 9001 Tax ID No.:. DE142401344
    > Read more
    Employees
    Year of foundation
    1990
    Certifications

    Watch

    NAF, a.s.

    Toolmaking: - injection moulds for plastics - precise stamping tools mainly for electronics
    > Read more
    Employees
    20 - 50
    Year of foundation
    1996
    Certifications
    ISO 9001:2008

    Watch

    Carpete Metal (shijiazhuang) Co.,Ltd

    About us : CRPETE METAL PRODUCTS(SHIJIAZHUANG) CO.,LTD as a processing factory specializing in customizing stamping parts, CNC turning parts, drawing parts and sheet metal parts by clients' designs/ drawings/ requirements. Our parts are widely applied in automotive & train, machine & equipment, telecom industry, electronics, medical devices, electricity and communication, transportation, etc. Why us : The professional technical team of our factory can analysis drawings well and provide technical support to clients in the development & adaptation of products. The steps from raw material purchase, tool/ mould design, producing, inspection, and delivery can be completed accurately by the unitive team. We have accomplishments until now: 1, Service Great Wall Motor Company Limited by customizing car parts since 2006; Great Wall Motor Company Limited is China's largest SUV and pickup manufacturer. We were listed on the Hong Kong Stock Exchange in 2003 and the Shanghai Stock Exchange in 2011. By September 30,2013, our assets had amounted to 48.279billion yuan. Now we own Haval and Great Wall brands, covering products range of SUV, passenger car and pickup. With over 30 holding subsidiaries, more than 60,000 employees, four vehicle production bases and a production capacity of 800,000 units, we have developed the independent matching capacit of core parts such as engine and transmission. 2, Service China CNR Corporation by customizing CRH train parts since 12,Oct., 2013; China CNR Corporation Limited(Stock No. SH601299) is a listed company approved by China Securities Regulatory Commission. It has a registered capital of 10.32 billion Yuan and is based in Beijing. CNR's business includes the research, development, design, manufacturing, refurbishment, overhaul and service of Rolling Stock (including Multiple Units), Urban Rail Vehicles, Engineering Machinary, Electromechanical Equipments, Electronic Equipments and related units. CNR has international-advanced technological platforms including 2 for High-Speed EMUs and 4 for high-power AC Electric Locomotives and AC Diesel Locomotives.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2005
    Certifications
    TP Suche Banner
Limit search by:
Region
Technologies
Materials
Company data
Industries
Certifications