483 Suppliers found
List
Raster
Map
Sorted by 
Go to watch list 0

    Watch

    Riess KELOmat GmbH

    ME TA LL - DEEP DRAWING AND ME TA LL - DR Ü CKEN For more than 100 years we shape metal. We specialize in manufacturing small and medium series in deep drawing, stamping and pressing procedures. In addition to hydraulic presses for deep drawing come for the metal pressing modern CNC-controlled machines. Due to the low times for the machines we save our clients time and money. We will be supporting your competitiveness. The range of conversion parts produced by us is diverse, as are the industries for which we are active (excerpt from the product list): • mortar shells creator for the construction industry • locking socket pots for the car industry • wheel parts for the automotive industry • bowls and pots for the gourmet and catering area • Tischfußabdeckungen for office furniture manufacturer • rotary valve for pumps in mechanical engineering • Fire protection sleeves for heating systems PLASTICS - INJECTION In our decades of know-how in the development and manufacture its own plastic products, our customers can count on.Also in this sector, we focus on small and medium batch production. With the highly specialized Engel injection molding machines, we can (almost) meet every requirement of our clients. The variety of products that we manufacture in Ybbsitz, to be proud of (Excerpt from our product list): • headlight housing for cars • belt clip for elevators • Pipe Cap for elevators • pulley for elevators • jack and coupler lever for elevators • bobbins for components in the electronics industry • Role bung for large carpet roll cover • Sockets for cable glands EMAIL - DIEBESONDEREOBERFL Ä CHE For over 70 years we are the specialist for email in Austria. Enamel tableware Riess is in every second Austrian household. Enamelled road and signs of Riess found from Vienna via Trieste to Frankfurt am Main. In addition to these "standards" we produce an abundance of special enamel parts, add to their outstanding material properties of email to its best advantage. Wherever extreme heat stability (fire resistance), UV and weather resistance, abrasion resistance, anti-bacterial and smooth surfaces are needed without pores, customers on enamel from our house. For example, for ovens and stoves: • lower parts for stoves • cooker parts • Smoke Pipes Also for kitchen back walls Riess enamel to offer outstanding. Chefs and restaurateurs sworn to our jointless email back panels that are easy to clean and hygienic properties. Another advantage is the low cost, dust-free assembly. More uses for special enamel conclusions of Riess: • Catalytic covers for baking tubes • Abrasion-resistant buckets • Chain stayer for sidewalk limitations • Hygienic and UV-resistant container for water treatment plants • BAR code labels for controls in the high temperature range The applications of Email Share are varied. Our experts can provide information. Just call: 07443 / 86315-39 e-mail: produktion@riess.at
    > Read more
    Employees
    50 - 100
    Year of foundation
    1550
    Certifications

    Watch

    Gräther Druckguss GmbH

    We manufacture the highest quality zinc die castings for the automotive industry, housing for the electronics and communications and for all pneumatic applications. Furthermore, we manufacture zinc die castings for all types of hardware, particularly window and door fittings from zinc diecast and furniture fittings. The zinc die casting a zinc alloy melt, the liquid is pressed under high pressure and high speed in a die-casting mold. This process takes place in dependence on the required surface quality and wall thickness within about 10 to 20 milliseconds. Here castings of high precision, hardness and strength can be produced. Because of the relatively low melting point and a particularly narrow solidification range of zinc alloys particularly close tolerances and demanding surfaces can be produced when zinc die casting. In this way the production of large quantities of a molding is possible. Zinc die casting is suitable for the smallest parts up to medium sized parts with complicated shape.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1991
    Certifications
    ISO 9001:2008

    Watch

    RAFI GmbH & Co. KG

    Development, production and sale of pushbuttons, control units and signal lamps for front panel installation and from short- and full travel keyswitches for PCBs. Customized data entry systems and standard-keyboards with membrane surface or with keys caps including electronics. Products Electromechanical components Pushbuttuns LUMOTAST Control units RAFIX Signal lamps Short- and full travel keyswitches for PCBs Customized data entry systems Standard-keyboards Membrane keyboards Electronics Field-bus-interfaces
    > Read more
    Employees
    > 1000
    Year of foundation
    1900
    Certifications
    ISO 9001:2008

    Watch

    Bühler CZ s.r.o.

    Rieter CZ s.r.o., Components Žamberk is an engineering firm that is part of the Swiss Rieter Holding. Work in Žamberk is a manufacturer of transmissions driving aggregates, gearboxes and industrial equipment according to the documentation supplied by the customer. The plant in Zamberk is specialized to: - Manufacture and assembly of industrial equipment and custom tailored solutions in the fields of packaging and handling equipment, wind power, food, electronics, automotive, etc. - Precision machining of cubic and rotating parts - Production of gearboxes and belts, pulleys and complete drive mechanisms - Installation robots for textile machinery Our priorities are: - Comprehensive production and systemic delivery - by ensuring the necessary materials to production to delivery of finished goods at the designated place - Supply within a specified delivery time and high quality - Certified quality system ISO 9001 - Background of a strong Swiss firm, the stability of resistance to shocks in the global market - More than fifteen years of experience in the German market - Qualified and motivated staff - High corporate culture We have high quality equipment: - Japanese machine shop with modern machining and turning centers - Workshop equipped for sheet-metal laser cutting, bending and welding in protective atmosphere - Wet painting and powder coating plant - Hi-Tech Japanese control and measuring equipment We offer: - Flexibility in solving problems - Top quality - Guarantee a delivery time - Long-term cooperation and fair trade relations - Reasonable price
    > Read more
    Employees
    200 - 500
    Year of foundation
    1908
    Certifications
    ISO 9001:2008
    TP Suche Banner

    Watch

    Creopp-tec

    From design to prototype and produce line, a comprehensive company Whatever the field of activity of a company, icts leaders from now on Should Have an obligation to do everything to AVOID leakage or dispersions customers possible. Review: The most common strategy is to position Itself on the market as a supplier of "global solutions", a generic term for a wide-range of services and benefits. The engineering office specializes in. technical hand by injection, CREOPP-TEC positions on the market All which can not only Provide the general solution to the original medical equipment manufacturing in the medical industry, the purpose aussi automotive accessories, toys, electronics, defense or cosmetics. Experienced technical experience over the years is to get all the additional knowledge. The company Operates since 1996 for the design and manufacture the Following The tools of all the field (injection / over molded, unscrewing, double injection for parallel and vertical 2K injection molding machine Blow molding gold...). If CREOPP-TEC subsequently assembled on a network of French molders, it aussi offers a low-cost industry with China Directly with our Chinese partner. Do not be dependent on technology goal INSTEAD take the best of each, this is the credo of the engineering office. From the stage of designing hand-TEC CREOPP CONSIDERS the eco-design and Provides referenced materials before the next simulation's phase. The rheological software Cadmould Rapid Could optimize the injection process and control the deformation. Not long after, in the stage of rapid prototyping and adjust the tool, development and industrialization icts on injection machine from 50 to 1000 tons, the company Will show the extent of icts different skills. For Having a final visual effect Quickly, the customers of CREOPP-TEC POSSESS lots of ways: such as stereo-lithography HR (High Resolution), the selected laser sintering (polyamide, Duraform HST gold Duraform Flex A6 steel or aluminum) or odd CNC rapid prototype, Vacuum Casting and RIM (Reaction Injection Molding - Process shaping thermosetting plastics).Finally, working on the industrialization stage encompasses all stages, it includes the assembly, painting, packaging, various checks and tests.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1996
    Certifications
    ISO 9001:2008

    Watch

    ROUGETTE TECHNOLOGIES

    The study and implementation of press tools for cutting and stamping. • The mass production of cut and stamped parts. This is a team of 48 people, dynamic and effective methods, validated by a panel of more diversified customers: automotive, hardware, tools, construction, electricity, electronics ... ROUGETTE TECHNOLOGIES provides: • A consulting firm performing the design, development and improvement of tools for cutting and stamping. • A mechanical workshop producing tools, adaptation and implementation tools at points of cuts and drawing and spare parts. • A workshop presses from 50 to 500 tonnes for the manufacture of spare sets of cuts and stamping. • The management of other services such as surface treatment of parts to deliver a finished product.
    > Read more

    Watch

    SJ Hardware / Dongguan City Shangji...

    SJ Hardware, a trusted, professional and experienced die casting and CNC machining manufacturing facility in Dongguan City, Guangdong, CN. It takes not more than 50 minutes from Shenzhen International Airport or ready-to-use Shenzhen International Exhibition Centre - the largest one in the world in Fuyong Town to the factory. Around 80 skillful operators, and 12 management and engineering staff. Administration, engineering, warehouse, production, quality and sales performs its own functions. The material includes zinc alloy, stainless steel, carbon steel, copper, etc. Due to strict environmental control in China, powder coating and electro-plating should be outsourced in goverment designated industrial zone, all manufacturing processes are completed in-house. All of our products are custom-made, and are mainly used in the telecommunication, building, automation, oil & energy, electronics & electrical, etc. Warmly welcome potential and existing customers to come and check out us any time.
    > Read more

    Watch

    Sapa GmbH

    Sapa aluminum profiles The Sapa Group is the world leader in the development, production and distribution of high-quality aluminum extrusions, heat exchanger strip, and building components and systems made from aluminum. A competent partner when it comes to modern design, complex structures and technically demanding products. Sapa Group - Worldwide active, always close to you The Sapa Group is an international group with a total of 13,000 dedicated employees and over 30 offices throughout Europe, the United States and China. In 2007, net sales of SEK 33 billion (EUR 3.4 billion) was generated (the official currency of Sapa Holding AB and the reporting currency of the Sapa Group is SEK) The head office is in Stockholm, Sweden. The market share of Sapa in Europe is 16 percent and North America at 21 percent. The division has 111 profiles presses (of 1040-7300 tons) in 15 countries. An important competitive advantage is the decentralized structure of the company. Each country is responsible for production and sales, but can at any time access quickly and easily back on the capacities of other Sapa sites. The customers of Sapa are very cared personally and individually. Customers from different fields have benefited from many years of experience, flexibility and creativity of the world market leader. In planning, the design and production of unique ideas made of aluminum. Sapa advises professional and personalized with any questions or requirements relating to aluminum. On request, we support our customers from the initial idea to the concept through to development and implementation of products. Very popular is convincing in specific, customer-oriented logistics concepts and through continuous development and research our support, we always come up with innovative products, designs and concepts at the highest technical level. For customers of Sapa do not just buy products made of aluminum. You are looking for forward-thinking concepts to improve their offers in the market. Sapa has developed skills and resources to understand the business of the customer exactly. We offer the technical and operational know-how to implement jointly developed ideas cost effective. All this is done under the umbrella of a clear philosophy: Only largest customer focus ensures accurate solutions and timely delivery. And that always happens in Sapa with the responsibility towards the environment, health and safety. Major industries of our clients are construction and automotive industry, mechanical engineering, electronics, furniture, transportation and trade. Sapa. Intelligent solutions with aluminum profile.
    > Read more
    Employees
    > 1000
    Year of foundation
    Certifications
    ISO-TS 16949:2

    Watch

    Solmser Feinblech und Apparatebau GmbH

    Thin sheet made ​​to measure. As specialists in sheet metal products we provide for industry, commerce and trade series production, small series and patterns of all kinds. Our focus is in the areas of electrical and electronics industry, mechanical engineering, environmental engineering and in the optical industry. We manufacture custom-made, with the lowest tolerances and come join us: On your specific needs and special we can always respond flexibly. Most modern manufacturing equipment on a production area of ​​over 3200 m2 allow us optimal and timely reactions from sketch and drawing in our design department or with your complete data sets. The machine park. We have a flexible and modern machinery, which enables us to implement different projects. It ranges from high-power laser systems via a stamped sheet metal machining center, CNC controlled press brakes, a fully automated bending center, wire straightening, to welding robots and manual welding processing with TIG and MAG. Laser processing Cope laser machining we. Onto our flatbed laser machine up to a size of 3000 x 1500 mm (steel up to a thickness of 10 mm, stainless steel up to 15 mm and aluminum up to 12 mm) The laser processing is connected to the fully automatic processing to a high-bay warehouse. Punching Cope in the large punching we steel up to a thickness of 4 mm, stainless steel up to 3 mm and aluminum up to 4 mm. The stamped sheet metal processing center is also connected to a fully automatic high-bay warehouse, which realizes loading and unloading. Automatic bending work Our fully automatic bending center with integrated Cutoption allows the edges of short-limbed profiles. The maximum bending length is 2540 mm. The maximum height of 254 mm and the maximum plate thickness 3 mm. Manual bending work Our only CNC controlled press brakes allow the folding of the smallest geometries up to the maximum bending length of 3100 mm, with a maximum thrust of 170 tonnes. Judge Our part straightener made possible by their 19 straightening rolls the production of low-tension and fine flat products. The maximum passage width is 1250 mm. The shortest leg length 100 mm, with a maximum thickness of 0.5 to 12 mm (depending on pressure). Automatic welding processing Our welding techniques are implemented at the TIG and MAG processes that allow us the welding of steel and aluminum. Our Nine-axis welding robot has a working range of 2500 x 1400 mm. An integrated removable turntable can position the working ranges freely through 360 degrees. Manual welding processing For manual welding processing, we employ a variety of welding equipment, welding tables and system. The machining on the welding table system can be realized up to a size of 3000 x 1500 mm. Press-and Joining Technology Our press-fit technology processes all standard self-clinching fasteners, leading manufacturers.The spot welding systems allow the joining metal sheets up to a thickness of 3 mm. Our joining technology is completed by connecting liquid form (clinching) and various riveting. Surface treatment For our products we offer a wide variety of types of surface finishing (eg, electroplating, powder coating, electro polishing, chrome plating, painting, silk screen) to. Through our partner companies this can be achieved quickly. Assembly To complete the products we carry in ...
    > Read more
    Employees
    50 - 100
    Year of foundation
    1990
    Certifications
    ISO 9001:2008

    Watch

    Topteam Development Co., Limited

    With more than 10 years of combined experience in the design, development, and manufacturing of plastic injection molds, we Topteam offer unique solutions to your tooling developing project. Topteam is a full-service tooling company capable of providing virtually any service to your project requires from design concept to finished product. No matter how complex or unusual, how large or small, we are capable of constructing high-quality, intricate and efficient injection molds quickly, whether simple single cavity pre-hard prototype molds or complex multi-cavity high-volume production molds for Automotives, Cosmetic packaging, Consumer electronics, Telecommunications and Home appliances. We strive to develop, nurture and expand long-term, mutually beneficial relationships with our customers. We are committed to servicing our customers with the most cost-effective, highest quality molds and parts, fast delivery and excellent services to get prospered and grew. Contact us today to discuss your project. We will meet and exceed your expectations through quality design, competitive pricing, excellent services, accurate scheduling and dependable delivery of our end product.
    > Read more
    Employees
    100 - 200
    Year of foundation
    Certifications

    Watch

    FUCO-HEG Maschinenbau GmbH

    Subcontracting work: precise, flexible, reliable - cheap. FUCO-HEG offers the complete range from the development and construction to production. A further benefit is its own electronics department. From the circuit diagram to programming, cabling, drive panel construction, assembly, etc. Production depth which is convincing. What counts is the fastest and most cost-effective way to achieve the results. We offer engineering and production services from one provider: * Production of parts according to stipulations * Production and assembly, incl. electrical and control engineering * Complete solutions - development, construction, production of machines and systems 3-D construction: consultancy, optimisation and an independent construction solution (see 3-D construction). Mechanical processing: Modern production equipment using CNC machines, processing centres and conventional machines. Welding: welding specialist with major verification of suitability according to DIN 18 800-7, section 6.2 with extension according to DIN 15 018-2, crane. In our locksmiths shop/welding shop we produce steel constructions up to a unit weight of 10 t. We have extensive experience in the field of sheet metal processing, incl. welding technology, of VA and NE-sheet metal. FUCO-HEG Machine pool and services The listed machines are designed for serial production. * Boring mill * Milling machines * Conventional lathes * High-performance radial drills * Surface grinding machine * CNC lathe, slant bed type * CNC bed type milling machine * Horizontal drills and milling machine Other services: priming --- lacquering --- processing of stainless steel and NE metals electronics department --- service, maintenance, repair Car pool Transport and customer service vehicles
    > Read more
    Employees
    50 - 100
    Year of foundation
    1986
    Certifications
    ISO 9001:2008

    Watch

    Mangel Formenbau GmbH

    LACK mold was founded in 1989 as a sole proprietorship in Melk (Lower Austria). Due to the good development and increasing demand, the company moved in 2000 to the newly built facility in Rye Village, a neighboring town of Melk. At that time, as the introduction of the single company in the mold LACK GmbH. Since the company's founding in 1989, the core competence in the design and manufacture of injection molds, primarily for the automotive, aerospace, entertainment, and electronics industries.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1989
    Certifications

    Watch

    Assemtron AG

    As a competent, innovative and powerful company offers Assemtron for over 10 years professional services in the following areas: - Electronics Manufacturing - - Assembly Manufacturing - - Manufacture of complete systems - - Engineering / Consulting - - Procurement / Supply Chain - - Outsourcing projects -
    > Read more
    Employees
    10 - 20
    Year of foundation
    Certifications

    Watch

    M.C.S. Morandi S.R.L.

    The company M.C.S. Morandi S.r.l., based in North Italy and established in 1961, offers long and proven experience in the design and manufacture of injection moulds. We can assist you from the initial concept till the production with in-house services all the way, cutting out the usual loss of time and keeping intact the essential know-how trail. With our great know-how acquired and stored during almost 50 years of mould making, at MCS is technically possible to provide innovation for the realization of complex parts and to supply engineered solutions for comprehensive cost-benefits and performance reliability that streamline production cycles. All the moulds are tested under production conditions on our injection moulding machines from 200 to 2.200 t + 2K + GID and are ready for immediate production start when delivered to our customers. Range of capabilities and services: • Solutions / Engineering and optimization of plastic components. We study the suitable concept and take care of the project up to production start. • Plastic part analysis, Design-FMEA. • Carry out of modifications and optimizations of the plastic parts and transfer of modified CAD Data through CAD-Software CATIA V5. • Design and manufacture of high-performance injection moulds with 3D CAD/CAM Systems. • Moulds up to a size of 2.000 x 1.600 mm and a weight of 30 tons. • Moulds with complex 3D profiles. • 2K Moulds, with shut off sliders and turning technology, with robot and turntable applications. • Moulds try-out in our Company. • Moulds with gas assisted injection (GID). • Stack moulds, Tandem moulds, family moulds. • Moulds and components can be measured with our Coordinate Measuring Equipment. • We also offer prototype moulds and small series production.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1961
    Certifications

    Watch

    EN-Tec GmbH CNC Zerspanungstechnik

    The company EN-Tec GmbH manufactures for renowned companies from the areas of the automotive industry, electronics industry and automation technology. Our production range covers the following areas:
  • Prototyping
  • Electronic housing, front panel and heat sink
  • Small batch production / mass production
  • Assembly production
  • 3D Milling including construction
  • Mould
  • Production of sheet metal stamping tools
  • Design models
  • CNC milling up to 1020x620x500mm travel (5 axes)
  • Wire EDM 250x400x400mm (30 degree clearance angle)
  • Turn
  • CAD / CAM programming with Mastercam and Vector
  • All data formats that can be taken, such as: Catia V4/V5, VDA, IGES, SAT, DWG, Inventor, DXF, SLDPRT
  • With you as a team, we design and manufacture according to your wishes and ideas.
    > Read more
    Employees
    5 - 10
    Year of foundation
    2005
    Certifications
    TP Suche Banner

    Watch

    LETOPLAST s.r.o.

    LETOPLAST s.r.o. is part of the international Lefevere Group, a Belgium based family owned group of companies established in 1900, and established in the Czech Republic since 1995. Founded as Wood & Plastics sro in 1995 to manufacture speakerboxes for the main international brand names, it was transformed into Letoplast in 2004 (name comes from the town Letovice and plastic) to focus on development and production of injection moulded, painted and assembled technical parts for the TV, audio and automotive industry. Between 2006 and 2008 an ambitious investment plan was, implemented, consisting a new production hall, large injection moulding machines with clamping forces from 850T to 2000T, several automated painting lines and assembling lines; mainly to address the rising demand of housings of flat TV’s and Automotive. Another production hall with injection moulding machines with clamping forces from 150T to 450T assures the production of small and medium sized plastics for automotive and consumer electronics. As a reliable supplier, even in highly fluctuating markets, we deliver high quality at a correct price by using our know-how and our strive for continuous improvement to establish and maintain a long lasting relationship with our customers.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1995
    Certifications
    ISO-TS 16949:2

    Watch

    KiKo Lasertechnik GmbH

    KiKo offers services for plastic laser welding in the automotive, medical, sensor, electronics and microfluidics sectors.
    > Read more
    Employees
    < 5
    Year of foundation
    2019
    Certifications

    Watch

    DKMet

    Our company is engaged in metal processing, we specialize in turning parts. We have completed many years of experience in Metallbearbeitung.Wir manufacture various parts Drehautomaten.Wir both parts in small series (of 500Stück), as well as in very large series. To our customers we offer: - The highest quality products - Due date of delivery - Low prices Our advantages: - Dynamic development of the company - Staff with many years of experience in the field of metal processing - Flexibility We work together with the Different industries such as construction, automotive, electrical and electronics industry Machinery: - Multi-spindle automatic lathes and Schutte, Gildemeister - Single spindle: Index, Brown & Sharpe, Steinhauser - Conventional rotary Banke, Schlifmaschine etc. We speak German and are able to answer to any inquiry in this language. We are happy to help if you have any questions or inquiries.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1998
    Certifications

    Watch

    BAUMANN RESSORTS SAS

    As a multinational company we would wish to introduce ourselfs and get in contact with customers of great competence. We would wish to be supplier of your valued company and get to know the responsible persons in respect of design, engineering and purchasing any kind of coiled springs, wire forms, stampings/pressings or any other metal formed component, which shall be technically demanding and of high quality. Our philosophy and committment of doing business is always based on a partnership guided by competence, respect and ethics to the benefit of both, customer and supplier!
    > Read more
    Employees
    > 1000
    Year of foundation
    1886
    Certifications
    ISO 14001

    Watch

    CST Stanztechnik GmbH

    Our team has gained knowledge in over 40 years working with fine stamp and forming techniques and is producing parts with high precision and quality for: pumps and compressors automobile industry mechanical engineering ships electric technology / electronics medical technology Our services are: producing from concept sketches and drawings of the customers consulting and cooperation with the correct design of fine press- and pressing tools. producing samples and small series providing tools and their inspection further treatment of form parts through (grinding, milling, drilling, descending, thread cutting, decresting, and trowalisating) assembly of parts to mechanical or electromechanical groups. General producing parameters Staming - fine cutting up to 100t - hydraulic press up to 100t - excenter press up to 63t - (leaf) Grinding - outer coaxial grinding (up to 125 mm and 200 mm) - inner coaxial grinding (up to 60 mm) - grinding without edges (up to 8 mm and diameter grinding) - plane grinding (tablesize 200mm by 600mm) Milling - horizontal and vertical milling (table size 250mm by 600mm, no numeric control) Drilling - simple rotating works no numeric control - universal spinning machine - mechanical spinning machine Decresting - rotation- and vibration- slid decresting - band decresting of small parts (only ferromagnetic parts) Temperature treatment* - tempering - warming, colour warming Lapping - round plates, plane parallel (valve plates), thickness from 0.8mm, maximum diameter 140mm (rz 3,2) (only tempered parts) Metal treatment* sn, cu, ni, cr, ag, au, metal colouring inclusive grinding and polishing Other drilling, descending rubbing thread cutting, fine drilling up to 10mm and vier spindle (no nc) *(these works are partly done in cooperation with partner companies of the region)
    > Read more
    Employees
    10 - 20
    Year of foundation
    2005
    Certifications
    ISO 9001:2008

    Watch

    Thurm Industriedruck GmbH

    For over 40 years, our company is known as a competent partner for mechanics, surface treatment, printing and assembly - specializes in the "face" of equipment. Our focus includes front and rear panels, front panels, nameplates and other components for equipment and machinery. Already in the second generation, we are appreciated as a reliable partner of major companies from the electronics industry, medical technology, mechanical engineering and optical engineering. Because our know-how makes us the experienced system supplier. Quality, timeliness, and efficiency are with us no coincidence and not dependent on the particular task or "happier order constellations," but the result of a targeted and coordinated repeatedly verified quality processes throughout our company. While this produced effort, but also makes the "difference" of which we stand out from other companies. With modern CNC-controlled punching, milling, turning and laser cutting machines we manufacture exactly according to your drawings and specifications. For the "perfect face" of their product, we offer a wide variety of surface treatments: smooth or textured paint, powder coating, anodizing, Surtec 650 ... Our decades of experience in all printing techniques guarantees the highest precision, quality and durability. For prototypes and small series production are various digital printers and processing facilities. We take care of them the complete or component assembly. We know what we are talking we think more comprehensively and more than someone who only prints or only painted or just milled or punched ... only, because our horizon is focused on three areas, not just a. With us they only have a contact person who is responsible for all areas and the optimal and timely execution of it completely takes over and monitors - and calculated quickly and fairly.
    > Read more
    Employees
    Year of foundation
    Certifications

    Watch

    Mahr spol.s r.o.

    Mahr is a globally operating, medium-sized group of companies in the capital goods sector, whose name is traditionally associated with the concepts of production metrology, quality and innovation. Besides high-quality measuring instruments for checking the workpiece geometry are also high-precision gear pumps (spinning pumps) and high-precision ball bearings as a universal device for mechanical constructions essential ingredients of the product range. Main customers are the automotive industry, mechanical engineering, precision engineering companies (also from the fields of optics and electronics) and - for gear pumps - manufacturers of synthetic fibers, elastomers, their suppliers and generally the plastics processing industry Selection of spare capacity Chip machining on CNC milling machines and lathes Cylindrical grinding, surface grinding Thread grinding Honing Heat treatment Jigs and fixtures Laser marking Metal - TRENEN (Band Saw) Assembly work - compositions
    > Read more
    Employees
    100 - 200
    Year of foundation
    Certifications

    Watch

    INDUSTRIAS DOJE, S.L.

    Aluminium and Zamak injected casting Zamak: parts of up to 1 kg for locksmithing, hardware, furniture, lighting, etc... Aluminium: parts of up to 1 kg for the handtools, electrical appliance, electronics, etc... Cold chamber machines from 70Tn to 160Tn - Hot chamber machines from 7,5Tn to 125Tn Mechanisation workshop: with drills, threaders, and pneumatic and hydraulic presses, etc... Finishing section: with vibrators, shotblasters ... . On demand and under total guarantee, Industrias Doje, s.l. can deliver the parts manufactured with the requested finish (chrome-plating, nickel-plating, zinc-plating, bricomated steel, paint finish). Mould maintenance workshop
    > Read more
    Employees
    10 - 20
    Year of foundation
    1957
    Certifications

    Watch

    BEIYE Jiangmen beiye Precision Hard...

    Founded in May 2005, Jiangmen Beiye Precision Hardware Co., Ltd. is located in Guangdong, China. We specialize in precision machining. Our products are widely used in the automotive, aerospace, industrial automation, flow control, medical, electronics and optics industries. Since June 2005 we are certified to ISO9001 and ISO14001. In April 2013, we received the certification of the aerospace management system AS9100. With Japanese technology and a focused management system, Beiye has longstanding partnerships with clients in the US, Germany, Switzerland and Japan. Our partners include companies such as Toyota, Denso, Panasonic, Citizen, TE, Banner, Contrinex, Elco, Kamakura and more. We have a complete diagnostic system. All raw and auxiliary materials are checked with an X-ray fluorescence spectrometer before use to ensure they comply with the EU RoHS Directive and the Japanese Environmental Standard.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2005
    Certifications
    ISO 9001:2008

    Watch

    Lovász Forgácsoló Kft

    Our main activity is the turning, most of all we produce small turned parts in large series. In the largest amount we provide spare parts for hand-and machine-controlled fastening ago, but also replacement parts for the automotive industry and electronics. We sell 20-22 million turned parts per year, which would not be possible without our well-developed machine park. Our business partners are mainly from the western states of the EU, almost 90 percent of our production is exported. Our mission is to get the satisfaction of our customers constantly and always produce the same quality. In addition to turning, we also deal with the sale of turning tools. Our company sells since the year 1993, the Mitsubishi Carbide turning tools, according to the request of European center. It was a significant development, as our company was elected in February 2004 on the general agent of Mitsubishi tools. Our goal is that we can introduce the Mitsubishi tools and their effectiveness with the more Hungarian companies so that more companies can use these high-quality Japanese quality. We help our customers according to their own experiences in the optimal tool selection. You can meet with our professional highly qualified colleagues in Hungary. I hope that I can welcome you in the near future between our satisfied customers.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1996
    Certifications

    Watch

    Lacrosaz Decolletage

    Since 1948 LACROSAZ is specialized in screw-cutting, machining and realization of sub-assemblies in small , middle and large series. Its constant care for complying with the market and the requirements of its customers enables LACROSAZ to work for many sectors in several countries.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1948
    Certifications
    ISO 9001:2008

    Watch

    Neue Lengenfelder Maschinen- und St...

    The New Lengenfelder mechanical engineering GmbH is a medium-sized company in Saxony with about 80 employees. The employees of the company have over 40 years of extensive experience in the areas of technological steel construction, the steel structural engineering, mechanical machining, hydraulics, electrics / electronics, vehicle manufacturing, container and mold making and general machine construction. We specialize in special and custom made. The production program includes the most diverse structural steelwork and welding constructions and without machining for many sectors of the economy according to their own, but also according to customers' drawings or goods of Environmental for disposal of waste and recyclables.
    > Read more
    Employees
    50 - 100
    Year of foundation
    2005
    Certifications
    DIN 18800-7:20

    Watch

    Hondvo Tooling Limited

    Hondvo Tooling was established in 2010, as private enterprise and reply on persistent superior quality and punctual delivery, Hondvo has been recognized as one top of the most excellent mould manufacturers integrating mould design, mold construction, injection molding into one. With the factory occupying of 5000 square meters, Hondvo is dedicated in precision & medium size of mold manufacturing. With advantages, Hondvo has technical office in Europe and Mexico for Service-after-Sale for customers. 001.jpgEquipped with the most advanced softwares such as UG, CATIA, and Mouldflow for design, analysis and manufacturing, imported highly precision tooling machines from Japan high speed CNC, Mirrordick EDM, Sodick wire cutting, and CMM inspection machines. We export 300sets moulds annually which range from precision, medium to large size. Our mold business has spread out to the followingmarkets: ●Automotive ●Home appliance ●Electronics ●Industrial ●Medical ●Others Core Priority Technology: ●2K/ 2 components mold ●Over mold ●Stack mold ●Gas injection mold ●High gloss steamed injection mold ●IMD/IML/IMF We appreciate clients as the focus, constant enhancements and innovation as priority, use Erowa system and ERP managing system in the whole processes of tooling projects, enabling the controlling detailed into each single tool part. And the company implements strictly ISO system with the international standards. Sincerely, we welcome you and expect to be most steady and suitable partner for you.
    > Read more

    Watch

    Entwicklung und Fertigung Eßbach Gm...

    The company developing and manufacturing Eßbach was founded in Berthelsdorf 1999. Since April 2007, we relocated our headquarters to Brand-Erbisdorf. Here are covering an area of ​​750m ² various machining centers, design workstations and above average well-trained staff available with which we can also realize your tasks! Our high quality standards are certified by our certification to DIN ISO 9001. Examples of our products you can found in our website www.efe-essbach.de. Our main pillar is the development, production and distribution of heat sinks for power electronics. In addition to liquid cooling body systems based Unicool we also manufacture air-cooling systems of the body or combined devices after the system coldplate. Of course, we adjust the devices on your required specifications. Customers who use our products or benefits, include Siemens, Bosch, Baumuller, Bonfiglioli Vectron GmbH and Lust Antriebstechnik GmbH. In addition to the production of heat sinks, we operate a small special engineering. With this we are able to manufacture high quality facilities capable of over CAD design and CAD / CAM Interfaces. Thus, several different labeling systems to the standard product labeling including PDC connection were realized in our home. The investments are made entirely with control, and CNC-axes and delivered. Our customers can be found among others in the field of automotive and supply industry. Examples are: - Test benches for drive spindles with data acquisition - Labeling systems with freely programmable CNC axes 800x600x400 - Marking gear parts with interface to the PPS system - Devices for assembly and testing purposes - Molds for aluminum cast parts up to sizes of 800mm, including processing of castings when required - Special coolant systems for machine tools With our technology, we are able to realize customer-specific solutions, including the manufacture of parts and assemblies.Our machinery, we have expanded to operate and in particular the following machines: - 1 CNC machining centers with tool change 2000x800x800mm, internal cooling and swivel head - 1 CNC machining center 1000x500x400mm with tool changes and internal cooling - 1 CNC machining centers with tool change 500x400x400mm and NC rotary table - 1 universal CNC milling machine 800x400x400 (vertical and horizontal) - 1 CNC lathe, diameter 300mm long and 300 - Conventional turning up to 1000mm long - NC mandrel tube bending machine to D 26x2mm VA tube - Korundstrahlkabine for VA materials - Edelstahlbeizeinrichtung inside and outside - TIG welding workplace The CNC machines are connected to our CAD / CAM system and thus to work in a position to meet your or our drawings. Again, we have customers such as Heidelberger Druckmaschinen AG, Deckel Maho, Samputensili GmbH, Bharat Forge Aluminum GmbH & Co.KG or Licatec GmbH.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1999
    Certifications
    ISO 9001:2015

    Watch

    OFA Advanced Ceramics Co.,Ltd

    OFA Advanced Ceramics Co., Ltd is a green and growing maker and supplier of ceramic-based materials. We produce technical ceramics on the basis of alumina, zirconium oxide, steatite and cordierite. It now exports all its output to European countries and to the Asia, Africa and American markets. OFA advanced ceramics can be used in the fields of household appliances, electro-mechanics, metallurgy, vehicle manufacture, fluid transport, aerospace, medicine, refinery, food and chemical industries, packaging science, electronics, industrial and transmission electricity, and guided light wave transmission etc. Our challenge consists in achieving excellence in both product quality and services for our customer's benefit. Otherwise, OFA CERAMICS focuses on direct contact with the industrial end users, as this approach shortens reaction times, makes it easier for the partners to share information and, most importantly, is essential in moving the process forward with different people involved. Our challenge is to develop an excellence in the quality of our products and service thanks to the competences and commitment of our employees. OFA ceramics Policy Customer’s satisfaction is our only target. We aim to satisfy our customer’s needs and surpass their expectations timely and constantly by providing high quality ceramic products & services.
    > Read more
    Employees
    5 - 10
    Year of foundation
    2010
    Certifications
    TP Suche Banner
Limit search by:
Region
Technologies
Materials
Company data
Industries
Certifications