483 Suppliers found
List
Raster
Map
Sorted by 
Go to watch list 0

    Watch

    Tritech d.o.o.

    The company’s beginnings go back to the year 1991 when associated company “Iskra” fell apart and “Iskra videomatika” also went bankrupt. The resources provided by “ORODJARSTVO ÐURIÈIÈ IN KOVINOPLASTIKA ŠKULJ” helped the company “Iskra videomatika” to continue its operating and from which a new company “Tritech d.o.o.“ was formed later. Workplaces weren’t lost and the market expanded, because not only did the new companies offer the financial resources, but they also brought new programs and technologies. “Tritech d.o.o.” is a young working organization and was founded in 1993. Basic activity of the new-formed company in the first two years was mainly own construction and production of tools for: · blowing plastic · extruding plastic · injecting plastic · die cast · cutting Over the last few years our company has started the construction and production of automatic lines and also equipment and machines made to order. Such production requires cooperation of experts from different areas. Therefore, developing-research team was formed within the organization. This group consists of researchers in the field of mechanical engineering, electronics and computer science. At the beginning there were 7 employees while today the company employs 29 people including the developing-research team. TECHNOLOGICAL PRESENTATION Our machines cover different production areas: · TURNING up to Ø 250x1000 mm · MILLING up to 600x600x300 mm · GRINDING -Profile up to 180x200x260 mm -Circular up to Ø 200x1100 mm -Plane grinding up to 450x350x1400 mm · COORDINATE DRILLING up to 1150x725 mm · CNC EROSION -Die-sinking up to 650x500x400 mm -Wire cutter up to 400x320x250 mm · MEASUREMENT MACHINE up to 600x500 mm · CNC 3D MILLING MACHINE up to 630x400x500 mm TOOLS Some of the companies’ significant tools are: Two-nested tool for injecting part from PA 66 with 30% glass fibers. It is carried through using a hydraulic extraction of inserts. The product must hold out 300 bars and 500.000 injections. There are two R 3/8 and s 26X2 coils on the product. Device for grinding the front of the gas turbines’ small spades (ABB SWITZERLAND). It can be used for universal grinding from Ø 400 to Ø 1700. Materials are made from stainless steel and aluminium. The device is used for maintenance of gas turbines worldwide. Combined tool for progressive punching of holders for wall plug-box. It is made of divided matrices and oppressed plates.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1991
    Certifications

    Watch

    VVB Handels- u. Vermittlungs-Büro G...

    Fa VVB Commercial and placement office consults, communicates and monitors requests and orders from special machines, tools, forms and samples. Edit these orders in our own tool and mold Lichtl Kft in Tamasi / Hungary or reliable, long-term partner companies in our region Tamasi. Through this close collaboration, we are (eg, machine frames and trusses) providing a complete package with editing and painting capable of precision components (items, small and medium series) and weldments. We process steel, stainless steel and high-alloy tool steels as well as aluminum, copper, plastics and copper alloys. Lichtl Tool and Mold Ltd. in Tamasi / Hungary employs 17 highly qualified employees. This design and manufacture high-precision injection molds for plastics and elastomers (including cold runner systems). Fa VVB conveys this respect tool sampling and production parts. Our particular strengths are motors and hydraulic seals. Its main customers are customers from the automotive, electronics and household industry. With our ultra-modern machinery and hardened tool steels up to 60 HrC processed (HSC-milling). We are certified to ISO 2003 since 9001.
    > Read more
    Employees
    Year of foundation
    Certifications
    ISO 9001:2008

    Watch

    Calzoni Srl

    The company Calzoni srl was born in 1988 and has as its "mission" the assembly of complete artifacts or machines for any industrial sector >>. By listening to many managers to expose their strategies to meet the productivity of companies, especially in particular periods of commercial peaks or simply for a structural reorganization, we were struck by the great need for dynamic and flexible external structures, inspired by the collaborative principles typical of "production third parties". For almost a long time, we have also produced different sub-sections, in line with the economic structure of our region: automation, electronics, electromechanics, lighting engineering, agromechanics, automotive, aesthetics or medical equipment, oleodynamics, thermotechnics , and others.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1988
    Certifications
    ISO 9001:2015

    Watch

    MMT-Micro Mechatronic Technologies ...

    Quick and inexpensive for design and production, Rapid Protyping and Rapid Manufacturing Save time and costs between design, prototype and series production. Respond quickly if you need new products! Using the latest technology, we can promptly model complex Function models, parts and molds for you to produce. We manufacture in the laser sintering process prototypes made of plastic (PA), flexible material (rubber-like, 50-85 Shore A) and metal (similar to ST-70) for Applications: Automotive - Electrical-Electronics - Home Appliances - Packaging Technology-Food Industry - Sanitary engineering - Connection technology - kitchen equipment, etc. The vacuum casting process is used to manufacture sophisticated prototypes made of plastic with a high degree of fidelity. Within a short time you are high-quality, true to the original prototypes. They reach a high cost savings over the traditional form of production from steel tools. The monitoring of work processes by microprocessors ensure optimum casting quality and ensure flawless results. Depending on Vakuumgießwerkstoff and complexity of the shape, up to 30 parts are made from a mold. This has a Vorseriencharakter and saves costs.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1999
    Certifications
    TP Suche Banner

    Watch

    Feinmechanische Werkstätte der Thom...

    The fine mechanical workshop Thomas Markl GmbH is a full-service provider in the field of contract manufacturing, design and complete solutions. In close communication with our customers, we cover all the steps from design to manufacturing. Our product range includes: - Custom-made - Small series of highly complex steel and aluminum parts - Assembly of complete assemblies and machines State of the art technology. On our machine equipment exclusively CNC machines come with digital drives are used. Using the powerful CAD-CAM software CIMATRON we use even complex precision parts to the tightest tolerances. Tailor-made solutions. Customers in the automotive, measuring equipment, electronics, medical, semiconductor, optics and aviation industry rely on timely, tailored solutions. Quality by competence. In our processes work exclusively professionals. Only in this way we can always provide seamless high quality from conception to realization. Integrated quality assurance. We are certified according to DIN EN ISO 9001:2000 by Bureau Veritas. Quality monitoring and process optimization take place daily - and not only at prescribed inspection dates. Living responsibility. Sustainable Production and recycling of raw materials are an integral part of our daily work. The recycling rate of waste production is 99%.
    > Read more
    Employees
    Year of foundation
    1987
    Certifications

    Watch

    Hittech Bihca BV

    Hittech Bihca BV is a professional producer of high quality precision parts and mini parts, being a skilled processor of special (high-performance) metals with tolerances to 2 micrometers. Based on 25 years of experience, we have developed a very high level of quality control. Besides the obvious quality principles in conformity with specifications and the good price/quality ratio, we distinguish ourselves by the pro-active generation of improvements. Hittech Bihca BV, your partner for the manufacture of high quality precision parts. A strong cooperation has been organized with other firms in our Hittech Group: Hittech Group is a Group of centrally controlled independent companies which operates as a system supplier, extendend workplace and partner of OEM companies. Our most important competences are: Development, value-engineering, re-design and precision motion systems. Hittech Multin Assembling and testing of (sub)modules, devices, machines and systems. Hittech Multin | Hittech Comac | Hittech Assembly Malaysia Precision mechanical process of soft materialsand wetpainting. Hittech MPP Precision mechanical process of solid and high-performance materials. Hittech Bihca Pouring of aluminum products in small until medium-sized. Hittech Gieterij Nunspeet Meltspinning of various (special) aluminium alloys. RSP Technology Supplying of services and maintenance of systems. IM Services&Support Our main markets are: Laboratory and analysis equipment Micro-electronics and semi-conductors Medical devices Packaging machines General machine construction
    > Read more
    Employees
    50 - 100
    Year of foundation
    Certifications

    Watch

    EMS-ELECTRA SRL

    EMS-ELECTRA is providing complete electronic manufacturing services (acquisition of the materials from the global market, assembly of SMD and THT electronic components on the printed circuit boards and also the final assembly and test of the product) and also the production of the PCBs and of the cases made by plastic injection (in the companies which belong to the group). We don’t have our own products, so we can focus on our clients’ needs. Our technical background and equipments allow us to produce almost all types of products, from small to medium quantities, ensuring a strict control of the quality, price and ESD protection. EMS-ELECTRA is a place to enjoy your work life and grow as a professional, so our 31 employees are oriented to fulfil our clients' requirements, and our company’s values guide us in this way.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2008
    Certifications
    ISO 9001:2008

    Watch

    Code-P west B.V.

    Code-P West BV is a manufacturer of precision mechanics, electronics and mechatronic products.
    > Read more
    Employees
    10 - 20
    Year of foundation
    Certifications
    ISO 9001:2008

    Watch

    Creator Forged Parts Manufacturer

    As a leading metal forging service supplier in China, Creator Forging Service Corporation is a subsidiary corporation of Creator Components, specializing in metal forging with more than several years. Forged parts manufactured by Creator Forging Service Corporation have mainly applied in automobile, motors, airplane, electronics, etc. We use advanced inspection equipment to inspect every manufactured forged parts so that all of parts have high precision to meet the requirements of customers. With competitive price, forged parts supplied by use are welcomed around the world. Creator Forging Service Company also offers sales service and after-sales service, convenient for customers purchasing.
    > Read more
    Employees
    50 - 100
    Year of foundation
    2003
    Certifications

    Watch

    Copal Sp. z o.o.

    Copal Sp. z o.o. is a professional subcontractor specialising in machining of extruded aluminum. Copal Sp. z o.o. has been on the market since 1994. The company has approximately 5,500 m2 production area at its disposal. Copal Sp. z o.o. has been certified to ISO 9001:2008 since 2006. The company is located in an area with many competent people within aluminum processing, and constantly training and education of new people in the processing of aluminum is ongoing. We have a huge experience in aluminium machining like: -Bending, -Welding, -Milling, -Punching, -De-burring -Components assembly To a great extent Copal Sp. z o.o. acts as a sub-supplier to the aluminum industry, and as a consequence we cannot state the names of the end customers for whom we process. Copal Sp. z o.o. can, however, inform you that we deliver components to many leading companies within: -The furniture industry -The automotive industry -The trains, bus industry -The advertisement industry -The Medical industry -The construction industry -The electronics industry Our advantages are: -Competitive prices for machining -Perfect localization to buy extruded profiles (SAPA extrusion is located near our company) -Possibility to anodize fabricated parts at our sub-supplier in Trzcianka. Tools play an important role within aluminum processing. Copal Sp. z o.o. is in permanent contact with toolmakers specialising in professional punching tool and automatic production lines
    > Read more
    Employees
    100 - 200
    Year of foundation
    1994
    Certifications
    DIN EN 1090

    Watch

    Apparatenfabriek ARA B.V.

    Ara from Aalten and only 8 kilometers from Bocholt (Germany), develops and produces mechatronic systems and modules for OEMs (Original Equipment Manufacturers) since 1961 Here everything is under one roof, the development of custom electronics, the production of sheet metal parts and the assembly of housings and entire mechatronic-assemblies. Our customers can be found in high-end markets such as the semiconductor industry, the medical- and analytical industry, the food industry and general machinery. As a quality conscious company, we check and monitor all processes within the value chain. ARA sees itself as a partner of the design through prototyping to production and assembly of the series products. Due to the great depth of production, there are different possibilities for the beginning of a collaboration with the customer. For this, production lines and equipment for sheet metal processing are available. As well as latest manufacturing technologies add up in the PCB Assembly for the highest quality SMD assembly (Surface Mount Technology). Hardware / Software and Mechanical development are supported by different software programs like HALCON, HiCAD, EPLAN and Altium Designer. ARA is also ISO 9001, ISO 13485 and UL-certified and works in accordance with international standards such as LEAN, QLTC and TCO.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1961
    Certifications

    Watch

    Cisp Electronics

    > Read more
    Employees
    < 5
    Year of foundation
    2014
    Certifications

    Watch

    MB-Elektrotechnik

    Our company operates in. Telecommunications, electronics, construction of small machines. We manufacture all kinds of lines, this we measured course. Even very sophisticated lines for the military and industry. Make small antennas ago of copper wire or wires harder. Quantities and 100 000 per delivery are quite possible. Or even more with reflectors. Our small machines, we design and build itself. These are equipped with the optimal control. It can not only high-precision wire parts but all sorts of sheet metal and machined parts be produced in larger numbers.
    > Read more
    Employees
    Year of foundation
    2001
    Certifications

    Watch

    Shunxin Mould&Manufacturing Company...

    Our company located in Southern China, found in 1996 with two factories, only around one hour trip to HongKong. We are a professional metal stamping dies and stamped parts & machined parts, Plastic Injection molding, Metal die casting dies/ parts maker for various kinds of industries according to the design or samples, meantime, we offer product design services and assembly solutions with our own excellent technical sourcing, take clients' concept into real products to mass production. We focus on overseas market, every year we can export around 500 sets of tools to foreign countries and do many successfully projects and design cases for our clients Our engineers can speak very good English. For every project we will assign a project engineer to follow your project. We target at various industries including Automotive, Home appliance, Chemical and Electronics etc. Our good equipment in both machining and measuring can ensure your products in a high quality level. We accumulated rich experience in product development and designing. Our staffs can make your products entered the markets with lower costs and shorter lead time. We devote to be your one stop solution shop. We can offer you a quote within two working days. If you have any projects on hand, please feel free to send us for quoting.
    > Read more
    Employees
    500 - 1000
    Year of foundation
    1996
    Certifications

    Watch

    Fischer Metallbearbeitung Morgenröthe

    The following materials, we can process: Ferrous metals: All steel sheets Stainless steel sheets, galvanized steel sheets, transformer sheet Non-ferrous metals: Aluminum, brass, copper Plastics: Laminates Round and hexagonal bars: Steel, stainless steel, brass, aluminum up to a passage of 32.0 mm Sheet material processing: Machining of panels with all dimensions up to 6 mm material thickness possible Furthermore, we offer the possibility for the following surface treatments of the parts of the sheet metal working and CNC machining all galvanized surface treatments Paint coatings Plastics and powder coatings Electrical and electronics industry: Sheet metal parts for deflection units of televisions, Shielding, isolation stamped parts made of hard tissue, hard tissue terminal strips with riveted solder, brass parts for the production of multiple sockets, CNC lathe parts Furniture industry: Fittings, Flange plates for the transport rollers orFeet of furniture with riveted pins, CNC lathe parts Fahrzeugelektrik: Contact parts for fuse boxes and switches, battery switch parts, seal rings for the oil pressure switch, CNC lathe parts Household industry: Punching, bending, CNC machining parts, partly in stainless steel for food slicer We manufacture your desired lot sizes on our production cost and required quality. The delivery of the finished parts is free home guaranteed by our company or by forwarding companies.
    > Read more
    TP Suche Banner

    Watch

    Titoma - Design For Asian Manufactu...

    Titoma stands for Time To Market: we design and manufacture electronic products in Taiwan and China, avoiding delays by designing next to the factories, preventing problems using our experience, solving issues on the spot. We take responsibility for the complete project, from industrial design and firmware all the way to mass manufacturing and logistics. Companies rely on us to avoid being stuck in the middle of any number of suppliers all pointing fingers at one another if something goes wrong. For quite a few years we cooperated with local factories to do the majority of the electronic design, but even with tight on the ground management that approach had too many problems, so we now do all electronic hardware design and firmware development in-house. To create a successful electronic device you need the expertise of a lot of different companies and experts. Our team has the full breadth of skills and experience, and our Taiwan head office is right in the middle of Asia's silicon valley, where devices such as Pebble and Nest had to be completely redesigned to make them manufacturable. While we work very closely with various vendors at the same time we also act as the IP Custodian for our clients, sharing info with suppliers only on a need to know basis. We focus on embedded devices in mid-range production quantities, from 50 high-tech security systems for airports to 50,000 dive planners, as long as the value per order is at least US $ 100K. For an overview of our work have a look at the presentations below. Specialties: Electronic Design: mostly Embedded Electronics, wearable / IoT / connected devices Firmware Design Mechanical Design Plastic Injection Mold Making Prototyping High end, high mix manufacturing in Taiwan Mass manufacturing in China Products: Wearables Appcessories Wireless connected devices Remote health diagnosis devices Medical electronic devices
    > Read more
    Employees
    20 - 50
    Year of foundation
    2003
    Certifications

    Watch

    ElectronXx GmbH

    We are a young medium-sized companies in the electronics industry based in Velbert in the district of Mettmann. With 22 highly qualified employees, we provide both industry leaders, as well as innovative StartUp `s from the regional and inter-regional level with electronic services of various kinds Our main features - Electronics development Circuit Design, Layout, Unbundling, prototyping - Electronics Manufacturing and Testing TFT and SMD assembly, as well as AOI and ICT IPC 610C / D, class 2 - Leaded and lead-free soldering processes Vapor phase, wave and reflow soldering - Surface treatment automatic painting, potting - Software Studio Programming logic devices - Equipment manufacturing / box build Assembly, testing, packaging: Available with inspection certificate as per EN 10204 We are certified to ISO 9001:2008 and KTA 1401.
    > Read more
    Employees
    50 - 100
    Year of foundation
    2008
    Certifications
    ISO 9001:2015

    Watch

    Dongguan Globalhardware Co., Ltd

    Dongguan Global hardware Co., Ltd is located in Dongguan China. As a screw manufacturer, we focus on precise screw and size from M1-M6 which is used on mobile phone, electronics, Machine and so on. Our main customers Nokia, Huawei, Lenovo... OEM and ODM are welcome.
    > Read more
    Employees
    Year of foundation
    2012
    Certifications
    ISO 9001:2008

    Watch

    RIETL GmbH

    Company Rietl, a pearl in the supply industry, manufactures custom components for medical, food and packaging industry, electronics industry and chemical and recycling industries. The production range includes enclosures, frames, cladding, welding constructions to turning and milling parts. Is manufactured on modern CNC machines. Our strength is the production and processing know-how of stainless steel, titanium, aluminum, copper and all the normal steel palette and your surface finishing. We accompany you from the product concept to mass production.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1975
    Certifications

    Watch

    SC 4K SERVICES SRL

    We are company 4K Services, located in Baia Mare - Romania, a German-Romanian converter for Automotive branch and General Industry, with two divisions: stamping and electrical components assembling. We can offer you the following products: stamped gaskets made of Cellular Rubber (like EPDM, NR, SBR, CR, etc) or Compact Rubber, PE/PUR-Foams, Polycarbonate Plates, Velour, Felt, etc, all with or without adhesive tapes rubber extruded profiles packaging materials made of PE/PUR-Foam A second division of our company can offer you the following products: lighting units / lamps assembling jacks, connectors and plugs assembling electrical cables assembling: cutting, stripping, crimping, soldering, etc. Our products are used for all industries: Automotive, Agriculture, Industrial Machines, Constructions, Packaging, Electrical / Electronics, Domestic App., etc.
    > Read more
    Employees
    50 - 100
    Year of foundation
    2007
    Certifications
    ISO 9001:2008

    Watch

    PENCA d.o.o.

    The company Penca doo is engaged in the development of tools for injection molding machines and manufacture of plastic products. The company currently employs 20 employees. The company is very flexible and therefore has the opportunity to quickly adapt to all market-related requirements and changes. Our activities are: THE PLASTIC PROGRAM A major part of the production program is the production of semi-finished products. We provide injection molding technical parts to 1,300 g weighing ago. TOOLMAKING Includes production and sales of tools for: - The injection of the plastic, - Metal machining, - Cast work. Typical industries where our products are used: - Household appliances - Auto Industry - Telecommunications - Office equipment - Electronics - Toys
    > Read more
    Employees
    50 - 100
    Year of foundation
    1979
    Certifications
    IATF 16949:2016

    Watch

    Hightech Mould Ltd

    Hightech Mold Industrial Ltd is a leading manufacturer of plastic injection molding and precision molds in China. Our products are widely used in automotive, medical, home appliance, and electronics industries. And most of our customers are from Germany, United Kingdom, Netherlands, USA, Australia etc. Our strength: 1. 5S Management Standard. 2. Highly qualified engineering team. 3. Modern equipments: most are imported from Germany, Switzerland and Japan. 3. The high performance machining center provides a machining accuracy of 0.005mm. 4. Short lead times and punctual delivery are a matter of course for us as a supplier of high-tech companies. Hightech Mold Industrial Limited Add: 1st Fl, Bld-B, Jianxing Ind.zone, No.37 Huanzhen Rd, Bao'an District, SZ, CN 518054 Tel: 0755-81776366 Ext 806 M: +86 15811826467 E-mail: Eva.Jia@hightech-mould.com Skype: Wen Fei Jia Website: www.hightech-mould.com
    > Read more
    Employees
    100 - 200
    Year of foundation
    Certifications
    ISO 9001:2008

    Watch

    Adeka S.A.

    The variety of our machinery guarantees the best price / performance conditions for all your parts between 2 and 42 mm diameter. Your parts of more complicated design will be machined on our ultra-modern, numerically controlled precision lathes. For high volume production, our cam-controlled machines with high output will do the best job.
    > Read more
    Employees
    5 - 10
    Year of foundation
    1972
    Certifications

    Watch

    BIAL d.o.o.

    If You have any interest in free brazing capacities please contact us. hereby We would like to present our company BIAL d.o.o. from Slovenia. As a producer of Towel warmers, (Tube radiator's- Rohrheizkoerper) www.bial.si in our production we have allso machinery for brazing. Hereby We would like to inform You that in our production we are able to braze different steel parts. Up to dimensions (height 150mm, Width 1300mm, Lenght 5000mm) Brazing is made in the furnace at 1090 degree in endothermic atmosphere. If you produce light or medium weight parts where low cost, high volume production is required, conveyor furnace will process your work efficiently and economically, typically free of oxidation and discoloration with less scale than other processes. The furnace is particularly well suited to continuous production line operations accepting parts ready for heat processing and discharging them ready for assembly or packaging. Because the furnace can be utilized for many heat processes, it is widely applied for parts or assemblies used in volume production industries such as automotive, home appliance, electronics, aircraft and hardware.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1995
    Certifications

    Watch

    Unicon Sp. z o.o.

    Our company was established in 1964 and from the beginning, it specialised in subcontracting services for automotive, electrical and electronics industries. We can offer precision turning services on one of our 20 turning lathes, or our 3 axis CNC machining center. We work in copper alloys, carbon steel, stainless steel, aluminium and plastics. Additionally, we can offer galvanic coating of produced elements (Cr, Zn, Ni, Ag, Au) and heat treatment. We work with diameters starting from 1 mm up to 45 mm. We also offer punching and pressing on eccentric press from 10 up to 100 tons.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1964
    Certifications
    ISO 9001:2008

    Watch

    Jasmin Brass Industries

    We are Jasmin Brass Industries is India based an ISO 9001:2015 certified largest manufacturer and exporter of precision brass components, metal turned parts, brass fittings and fasteners. Company was formed in 1996, with a vision to produce and deliver high-quality products at competitive price on time - every time to all our clients around the world... The company has a state of the art manufacturing facilities for Brass, Copper, Bronze, Aluminum and Stainless Steel Components and Process Including Turning, Milling, Forging, Casting, CNC Machining, Stamping and Pre-Assembly Work at Jamnagar-India. We sell direct to OEM’s and Users in Europe, America, Australia, Canada, Russia, South East Asia and The Middle East. As a global supplier and largest manufacturer we are working with many industries like: Plastic Molding Industry –> Threaded inserts for plastic and wood… Hardware & Fasteners –> Brass Inserts, Brass Anchors, Nuts, Bolts Screws, Studs, Washers, Spacers… Hose & Pipe Industry –> Brass hose end fittings, Brass Pipe Fittings… Sanitary Ware Industry –> Brass Plumbing Fitting Parts, Tap and Mixer Parts and Fittings… Electric & Switchgear Industry –> Brass Switch and Plug Pins, Terminals, Connectors, Neutral Link, Earth Terminal Blocks, Cable Lugs, and Turned Parts for Electrical Products… Automotive Industry –> Battery Terminals, Brass Wiring Accessories, Brass Lock Parts, Molding Inserts for Plastic Body… Home Appliances –> Brass Turned Parts for Mixer Grinder and Juicer , Brass Fittings for Heating Elements… Furthermore, We are able to produce any types of brass turned parts as per technical drawing or sample piece… Our Strengths: -> One stop source for all types of Precision Brass Turned Components, Brass Fittings & Fasteners. -> All products meets International Quality Standards. -> Company has 25+ years experience for develop and supply top quality Brass, Copper and Bronze Turned Parts for various industries. -> Company has state of the art manufacturing facility and Assured quality control penal with ISO 9001:2015 Certification. -> Quick Inquiry Response - Competitive Prices - In Time Delivery - Full Customer Satisfaction. -> We offer customized products according to clients requirements. Please do consider us and send us your valuable inquiries, we will offer you a top quality products at competitive price. Please visit Web: www.jasminbrassind.com for more details -
    > Read more
    Employees
    20 - 50
    Year of foundation
    1996
    Certifications
    ISO 9001:2015

    Watch

    JPY MOULD (HK) LIMITED

    JPY annually exports 180-200sets of mould range from precision, medium to large size. Most Moulds exports to Japan, India, Germany, France, Czech Republic, USA, Canada, Brazil etc. Our mold business has spread out to the following markets: ●Automotive (Interior & exterior, trim parts) ●Home appliance ●Electronics ●Motor ●Industrial, Medical ●Others End clients cooperated are Honda, Toyota, Nissan, Volkswagen, BMW, Audi, Bentley, Peugeot, GM, Ford; Fuji Electric, Panasonic, Toshiba, Epson etc. Core Priority Technology: ●Prototype Mould ●2 components Mould ●Stack mold ●IMD/IML/IMF ●Low&high volume moulding production
    > Read more
    Employees
    100 - 200
    Year of foundation
    Certifications
    ISO 9001:2008

    Watch

    ELVAC AUTOMATION s.r.o.

    GENERAL INFORMATION: ELVAC AUTOMATION Ltd. is a customer-oriented, mediumsized engineering/supplying company with its own projection and production capacity. Our main activity is the provision of a wide range of services in the area of industrial automation and electrical engineering, which we offer in all corners of Europe. ELVAC AUTOMATION Ltd. is part two holding groups: - Ingeteam which is an international group with its head in Spain. More than 20 technology subsidiaries cover wide range of acitivties in energetics, electrical and machinery; - ELVAC GROUP plc holding company, which has subsidiaries involved in computer technology and ecotechnology. HISTORY: 1991 ELVAC Ltd. founded as a company focusing on the provision of services in the area of industrial automation and electrical engineering 1992 ELVAC Ltd. entered into a strategic partnership with SCHNEIDER ELECTRIC, one of world leading manufacturers of automation means based in France. 1993 ELVAC Ltd. launched wholesale of components and device for industrial automation and electrical engineering. 1997 ELVAC Ltd. expanded its portfolio of services by tailormade production of switchboards. 1999 ELVAC Ltd. transformed into the ELVAC GROUP joint stock company. Headquarter was established on Mistecka Street in Ostrava - Vitkovice. 2005 The ELVAC GROUP joint stock company transformed into a holding company. ELVAC AUTOMATION as a subsidiary is in charge of industrial automation. 2006 The company Ingteam a.s., that is an important engineering organization in the sphere of metallurgic and mechanical technologies automation in the Czech Republic, enters in the Elvac Automation by a majority portion. Thus the company becomes the member of the IngeTeamu having its central offi ce in Spain. The integration with the powerful engineering company brings wider professional background and the possibility to enter in new markets. 2007 All company’s processes are certifi ed by ISO 9001 since November 2007. The certifi cate is valid for the following activities: production of switchboards, industrial electro-material wholesale, projects of common automation, construction and supplies of single-purpose machines. STRATEGY: We are convinced that our ability to compete is strictly measured by the quality of services we provide. The best qualifi ed judge of the level of our services is the customer. The basic tool for fulfi lling our vision is the ability to pay close attention to our customers’ needs and meeting their requirements in a reliable and fl exible manner, while offering services ranging from the drawing up of an initial idea, routine task-tackling to after-sales service. Only real experts as well as reliable, pro-active and loyal employees guarantee a smooth operation of a company. That is why we have implemented a motivational system of evaluation. It is also the company’s policy to ascertain that our employees have the opportunity to improve upon their skills and enhance their career prospects. Our relationships with business partners are based on long-term co-operation and mutual merit. We pride ourselves on carrying out all obligations in the course of doing business in this fi eld. We put considerable effort in making sure that our activities are transparent and predictable. VISION: Our vision is to create and develop a customer-oriented, medium sized engineering/supplying company, which provides a complex set of services in the area of industrial automation and electronics. We offer tailor-made solutions to our clients’ needs which are distinguished for their top quality and excellent customer service.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1991
    Certifications
    ISO 14001

    Watch

    Marian Druckguss GmbH

    since 1922, we produce successful quality parts and assemblies made of die-cast zinc and later also from thermoplastic materials. In the area of ​​zinc we produce hot chamber die casting machines with a clamping force of 25 t - 100 t with unit weights of 1 g - 1,200 g in the plastic injection molding foundry will process all common thermoplastics to parts weighing up to 150 g. Through the use of modern technology, we meet the demands of many renowned companies from various industries: Automotive Home appliances Construction & Hardware Technology Toys & Promotional Products Electrical & Electronics industry Medical Attention we always pursue the technical development of the production to take advantage of innovations to benefit our customers. That makes us a partner for economic and reliable production. And for good reason. Because - We bring your ideas into shape! With us, the service does not start in production.Already in the development and design of new products, we provide our clients with advice and practical support you with our know-how. Beginning with the implementation of feasibility analysis work, our experienced professionals work together with customers to develop successful products. Because even in the design, it depends on a die-cast oriented planning. With us, the customer's ideas to be implemented in optimal production solutions. Our offer is varied and above all, flexible. In our extensive range of machinery is carried out in an economic processing of different batch sizes and a wide range of unit weights. The provision of fully assembled and surface-treated products is given by the distance to qualified agents at any time. We see ourselves as "complete" - provider, wherein the degree of production depth is determined by the customer.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1965
    Certifications
    ISO 9001:2015

    Watch

    Dr. D. Müller GmbH

    > Read more
    Employees
    20 - 50
    Year of foundation
    1967
    Certifications
    TP Suche Banner
Limit search by:
Region
Technologies
Materials
Company data
Industries
Certifications