2286 Suppliers found
List
Raster
Map
Sorted by 

    Watch

    CGS S.r.l.

    CGS Srl is born as artisan company at the end of the sixties to assume, more and more, in the years a real industrial structure; currently it occupies an area of 1500 square meters where work about twenty employees. CGS manufactures a wide range of products including precision components and small parts, drawing fittings for the earthmoving industry, agricultural machinery and oleodynamic systems, as well as components ready for a wide range of industries; They complete the range of transmission organs such as angle heads and jacks and magnetic devices, solenoids and rigators. Thanks to decades of experience and the sensibility and attention for the demands of the clients, CGS Srl is able to offer personalized solutions and high quality by ensuring advice and assistance in the phase of pre-sale until delivery. The technological adjustment and the continuous search of operation models more and more to the state-of-the-art allow CGS to propose to the own clients efficient and effective solutions both beginning from the particulars present in catalog and beginning from the sketches and from the specific applications of the clients. This approach based on the support to the client and aimed to the flexibility allows CGS to affirm its own presence on the Italian and European market more and more. Turning, finishing and treatments CGS is equipped with two production units that perform all the necessary turning operations, organizing overlapping production to ensure a total daily production capacity of approximately 60,000 hours on 17 turning centers. CGS Srl is able to realize precision components with diameter between 3 and 70 mm; the worked materials embrace the whole range of the automatic steels,from reclamation, cementation and good part of the stainless further to brass, aluminium, bronze, copper and plastic materials. Finishing works CGS also has a specialized department in the following stages of finishing: - Reaming, Tumbling, Milling with No 2 vertical machining centers, Lapping, Countersink, Deburring, Surface rolling, Assembling with the possible management of commercial components or supplied by the customer, Micropunting Marking. Grinding processes The department designated about grinding works performs the following manufacturings: - Centerless and Plunge grinding with tolerance of 3-5 microns and roundness of 50% tolerance - Grinding on centers, surfaces, centerless and superfinishings where tolerances are outside of what we can obtain internally. CGS guarantees accurate control of the quality of the works implemented, and therefore of the finished detail delivered to the customer. Washing the parts with ultrasonic and vacuum technology - For all the details that need to treated, they are washed at the CGS production department, before starting the external treatment required to obtain the best result in terms of quality and efficacy of the treatment itself; - All untreated ferrous items are delivered after a suitable washing phase during which a protective substance is applied, with a guaranteed 3-month standard length, which can be extended on request.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2008
    Certifications
    ISO 9001:2015

    Watch

    PMT GmbH

    Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials. We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more! We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2005
    Certifications
    ISO 9001:2008

    Watch

    TASKIRAN MAKINE IMALAT SAN. TIC. LT...

    TAŞKIRAN MAKINE was started its production in 2009 with the aim of making machinery. We are working with 8 machines in closed 400 m working area in 2018. By 9-member staff is innovative and customer-focused. The principle of working is innovative and development oriented in the machine sector
    > Read more
    Employees
    10 - 20
    Year of foundation
    2009
    Certifications
    ISO 9001:2015

    Watch

    SBS Group

    We, the SBS from Aalen, have been offering - in the truest sense of the word - precision in series for over 35 years. Founded by Friedrich Bollheimer, the company is now in the third generation. SBS combines the individuality and flexibility of a family business with distinctive technical know-how and the latest CNC production technology in the areas of turning, milling and assemblies. We provide our customers with advice from the manufacturer's point of view, from the prototype to the series of component parts, via an efficient supply chain. In addition to our high-quality machinery, we also have an assembly department. In addition to the production of precision components from prototypes to series parts, we take on complete process chains for our customers through to the implementation of system solutions. This enables us to offer you ready-to-install solutions. TO PLAN. TO DEVELOP. TO EDIT. TO USE. SBS.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1985
    Certifications
    ISO 9001:2015

    Watch

    Inoxdea Srl

    INOXDEA is a young family business based in Erbusco (BS), Northern Italy, with a twenty-year experience in stainless steel processing. Ever since its foundation, InoxDea has specialized in products and services destined to the food industry, such as contract manufacturing of machinery and spare parts for sealers, packaging machines and fillers, as well as for the gastronomic, the confectionary and the tinned food industries. INOXDEA can also assemble and deliver preassembled small groups or sub-groups of machines and implants. Our headquarter covers a surface of 3000 m2, thereof 200 m2 occupied by our offices, and has 1750 m2 dedicated to our manufacturing sites. We constantly improving of our production and delivery process, in order to assist our customers in every phase of the production and craft high-quality products. We are equipped for the following realizations according to customers’ requests and designs Steel Processing: • Cutting • Pipe Cutting • Bending / Clinching • WIG und MIG Welding Finishing: • 2B-Sheet • Satined – Scotch–Brite We dedicate our undivided attention to the details of the final product and to our customers’ satisfaction. Thanks to our machine park we are able to realize steel sheets according to Your indications and guarantee the perfect quality. Thanks to our just-in-time (Kanban) principle we are able to minimise the stocking time, guarantee a fast delivery, optimise the production process and consequently reduce the waste. By means of suitable softwares, our quality management and technical office can assist, test and scrupulously follow every product in every phase of the production. REALIZATIONS • Tubular Structures • Filling Funnel/Funnel • Filler • Sealing Machines • Stainless Steel and Scotch Brite Cooling Troughs • Vacuum Pipe Collector • Framing for Multihead Weighers • Electrical Enclosures • Platforms SERVICES • Laser Cutting • Laser Pipe Cutting • Plate Bending • Assembly of P.V.C.- Pipes with relative equipment Our motivated Team works two turns therefore can realize the products with reliability and precision for Our international customers. We are eager to examine Your own projects or models and to submit a concrete offer. In case You need further information or clarification, please do not hesitate to contact us.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2002
    Certifications

    Watch

    Torneria OML Srl

    Torneria OML is specialized in high precision CNC machining. Since 1982 we have been specialized in the processing of any type of metal. Thanks to the use of the latest generation and highly technological machinery, we are able to guarantee the highest quality and precision, always offering an excellent quality / price ratio. Our qualified and constantly updated staff is able to quickly manage any type of order, from small and medium-sized production to high-precision machining. Thanks to the adoption of modern CNC technologies, we have considerably reduced production times, greatly increasing the reliability of the productions themselves. To always guarantee quality products, we have introduced systematic checks according to UNI and ISO 9001: 2015 and ISO 14001: 2015 regulations. Our company is part of the ATI set up for participation in the project “Venetian mechanical manufacturers on behalf of third parties present themselves in Europe”, which will be implemented using the POR Veneto region funding, part of the ERDF. Thanks to the use of the latest generation and highly technological machinery, we are able to guarantee the highest quality and precision, always offering an excellent quality / price ratio. Our qualified and constantly updated staff is able to quickly manage any type of order, from small and medium-sized production to high-precision machining. We are specialized in the creation of components for the sectors: Valves, Gas Components, Pneumatic Components, Automotive, Hydraulics, Hydraulic, Naval, Nuclear, Oil.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1982
    Certifications
    ISO 9001:2015

    Watch

    RICH Praezision GmbH

    RICH Precision means that we manufacture for you absolutely precisely and of high quality. We specialize in the manufacture of precision turned parts and the manufacture of complex workpieces that are manufactured on turning and milling centers. The assembly of assemblies is taking up more and more space.
    > Read more
    Employees
    20 - 50
    Year of foundation
    Certifications
    ISO 9001:2015

    Watch

    Miglio Emilio S.R.L.

    We are suppliers "historical" Customer paramount operating in various sectors. Especially in the field appliances boast ten collaborations that, in some cases, exceeding 40 years. Our specialization is to provide the customer a 360 degree service from the idea or project / co-project, the construction of molds-equipment manufacturing to delivery of the finished product. Among our main products we veneers of each type and material, balancing hinges for kitchens covers and flush, aesthetic parts, electrical connections and moving joints. Our fleet, as well as several presses (up to 200t), two wire erosion, a plunge erosion, a business center and a variety of other machine tools, also has two assembly units designed and refined internally in the company specifically dedicated to realization of particular assembled groups. We are certified ISO 9001 since 2007, we design with the latest applications (Creo PTC) and build our internal molds, equipment and assembly machines with which we produce the finished product.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1971
    Certifications
    ISO 9001:2015

    Watch

    Kleysenz Technology(Shanghai) Co.,Ltd

    Kleysenz Technology(Shanghai) Co., Ltd. is a professional mechanical OEM (original equipment manufacturing) and ODM (original design and manufacturing) service provider, dedicated to providing industrial design, engineering and manufacturing services for metals and plastics. Our low-cost production capacity is located in low-cost areas such as China, which enables us to provide customers with competitive manufacturing costs. You can also achieve more convenient communication and product delivery through our long-term partner, GENOV Internationaler Handel GmbH in plankstadt, Germany. Kleysenz Shanghai development teams work with customers to ensure that their dreams come true and that their products are of the best quality. Kleysenz Shanghai has a first-class development team that provides unprecedented service and support. We have many factories in China. We can produce all kinds of parts and components for our customers according to DIN ISO and international quality standards. Machinery manufacturing Equipment industry Electrical industry Automobile industry Health industry Our customers are mainly from Germany. With our wide range of products, we can provide you with the best quality single parts, component groups and finished products at the most favorable price. In addition, we offer you the possibility to significantly reduce product costs and improve competitive opportunities. We are happy to create a free and uncommitted offer for you Kleysenz Shanghai - your reliable partner for manufacturing and purchasing in China !
    > Read more
    Employees
    20 - 50
    Year of foundation
    6
    Certifications
    ISO 9001:2015

    Watch

    Ernst Reiner GmbH & Co. KG

    PEOPLE WITH EXPERTISE AND EXPERIENCE As a customer, you benefit from our generation-spanning experience and high quality awareness our specialists, which they continuously pass on in the company and in training. When it comes to tightest tolerances, complex geometries and demanding surfaces, REINER is your contact partner. ZINC DIE-CASTING With zinc, extremely filigree or thin-walled, technically high-quality parts can be cast and a very high degree of accuracy is achieved. In addition, zinc die-casting guarantees high productivity even with small quantities and, thanks to its durability, is a very interesting economic process. At our location in Furtwangen, zinc die-cast parts with a part weight of up to 700 grams cast in die casting machines with a clamping force of 5 to 125 tons. With a maximum clamping area of 400 x 600 millimetres, we cast the alloy Z410. MIM - Metal Injection Moulding In series production, MIM opens up completely new technical possibilities - right up to highly complex geometries and always with optimised cost-effectiveness. Cross holes, internal and external threads, gear teeth and surface structures are easily integrated into the component by MIM. The process combines the freedom of plastic injection moulding with the properties of metals. At REINER, a selection of low-alloy and stainless steels is used here. PRECISION CUTTING with forming technology In the field of precision stamping and forming technology REINER offers a range of processes and technologies for high-precision stamped and bent parts. Fine punching, hydraulic bending processes, NC punching or NC bending are as much a part of this as laser cutting. ASSEMBLY SERVICES Thanks to our expertise and range of services as a specialist component manufacturer, we can also process complete assemblies, partially assembled assemblies, components, system assemblies and assembled individual components for you. A unique selling point of REINER in component assembly is the vertical range of manufacture, which starts with the sketch plan if required. In the in-house development center, engineers are available at CAD stations to work out plans and transfer them seamlessly into the production of the components. TOOLBUILDING We are your partner for mould making, precision stamping tools and devices. The equipment: - CAD / CAM for design and production - sink and wire eroding - Surface, profile and jig grinding - Most modern CNC programming technology - HSC milling - Coordinate measuring technology for form and pattern measurement - Centres for machining - Services from the design to the finished component. In addition to the design and manufacture of tools and devices, we carry out maintenance and repairs ourselves.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1913
    Certifications
    ISO 9001:2015

    Watch

    Ansla Science Technology Co., Limited

    Ansla was found as we want to make better quality goods and services for customer, we have very professional team and precision production & inspection equipment. All of stuffs have over 10years in the metal and plastic product field, They are dedicated and passionate, can provide professional products, manufacturing services, and can quickly respond to any guest's problems….
    > Read more
    Employees
    50 - 100
    Year of foundation
    2019
    Certifications
    IATF 16949:2016

    Watch

    Blechform24 GmbH

    We are a young plate processing center in the heart of Saxony and edit sheets up to a length of 4000 mm and a plate thickness of 25.0 mm. Our services for you: - Laser cutting, - Folding, - Threading, - Sinks, - Drilling, - Welding, - Turning, - Milling and - Powder coating
    > Read more
    Employees
    20 - 50
    Year of foundation
    2011
    Certifications

    Watch

    PREFAG Carl Rivoir GmbH & Co. KG

    PREFAG has been located in Walzbachtal for more than 65 years. We are a strong partner as a supplier in sectors such as industry, medicine, aviation and automotive. Our qualified expert team actively supports customers and suppliers in the development of new components and assemblies. The complex and miniaturized turned parts up to ø30 mm are our core competence. We have innovative strategies and a high level of vertical integration in the manufacture of short and long turned parts - including further processing, eg heat and surface treatments.
    > Read more
    Employees
    200 - 500
    Year of foundation
    1954
    Certifications
    ISO 9001:2015

    Watch

    KleRo GmbH Roboterautomation

    You would like to make metallic components additive? Are you interested in the possibilities of this technology? With the additive manufacturing of 3D-printing metal (SLM, Laser-cusing®, DMLS etc.) we offer you a production technology that is no longer used only in prototype production. This process offers completely new possibilities where conventional processes such as laser cutting, turning or milling reach their limits. This is a process that is used exclusively for the production of metal. As with 3D printing, the components are built up by layer-by-layer build-up and fusion of metal powder; the component has almost identical mechanical properties to the original material. You need support in implementing your automation project? Then you are exactly right with us! We realize complete manufacturing cells according to your idea. From the feasibility study on the construction and assembly to commissioning and on-site support, we are the right partner for your project. In particular, we cover the following areas of responsibility: - Project Management - Programming - 3D printing metal (additive manufacturing) - Security management - 3D scanning - Milling technology - Construction - Assembly - Hose packages - Service - Training Our 3D metal printing services at a glance: - construction work (cooling ducts, component optimization, etc.) - Checking the cooling channel design (flow simulation, thermal images, flow analyzes) - coatings - Plastic prototypes - Component measurement - Creation of plastic models - 3D scanning / reverse engineering - fine machining (milling, grinding, eroding etc.) - Surface treatment (anodizing, electropolishing, etc.) - hardening - welding
    > Read more
    Employees
    20 - 50
    Year of foundation
    Certifications

    Watch

    Maschinenbau Fegler

    It does not matter what kind of error or problem your system has. Our competent service team will take care of your matter. Our range of services from Remagen is very diverse. We offer the right solution for you, from maintenance to assembly service and CNC production to a wide range of spare parts. We will also help you in the field of special plant construction. We offer each customer an individual solution that is tailored to the customer-specific branch or industry. Because no area of application is like the other. Our technical know-how and innovative solutions ensure a great competitive advantage that is worthwhile. Take us to Ko
    > Read more
    Employees
    < 5
    Year of foundation
    2020
    Certifications

    Watch

    Melchers Components - Melchers Tech...

    C. Melchers & Co. was established on January 1, 1806 in Bremen, where the global company still maintains its headquarters to this very day. In the first few decades of the company’s history, over 30 ships sailed the oceans of the world under the Melchers flag, linking the ports of Europe, America and the Pacific. In the 1860s, C. Melchers & Co set up operations in Asia, where all its trading interests swiftly moved. At the same time, with the onset of steam ships, it abandoned its own shipping business to devote itself entirely to extending its trading operations. 1866 saw the establishment of the first branch in Hong Kong, in the wake of which China began to develop into a key lynchpin for the company’s business. The ensuing decades were a period of rapid growth for Melchers in China, with over 2,000 people employed at 12 branches and plants throughout the country. The First World War proved to be a setback for business relations, although business quickly recovered. It was not until the end of the Second World War in 1945 that business came to an almost complete halt. Even so, the company continued to survive, re-opening its first branches in Hong Kong, Singapore and Kuala Lumpur in the early fifties and gradually extending its branch network across Asia. Following the opening of the Chinese markets at the end of the seventies, Melchers set up branches here again, underscoring the significance of Chinese business for the company. With the establishment of a branch in San Francisco in the early eighties, the company also started to engage in US-Asian trade so as to gain a share of the rapidly growing trading relations between these two regions. Trade with China remains a key focus of the company’s overall business, comprising as it does imports of special natural products and finished goods on the one hand and exports of plant, machinery and supplies for the Asian industry on the other. Yet, business with South East Asia has since also come to the fore, with the company amassing broad-based expertise in marketing and selling consumer goods in particular. There are special departments for each article group in Bremen as well as at the foreign branches. They work largely independently within the overall company and are staffed by highly qualified experts. Over 1,000 employees in Germany and abroad assist customers and suppliers with their specialist knowledge. Rather than being based at the company’s headquarters, most of these employees are now stationed at subsidiaries, something which in turn reflects the company’s further development and the strategic alliances which it has forged.
    > Read more
    Employees
    > 1000
    Year of foundation
    1806
    Certifications

    Watch

    HÄNI + CO. AG

    We produce with the most modern Machines for manufacturing pre-finished turned parts for customers in the automotive, electrical and medical (ISO / TS 16949, ISO 13485, ISO 14001). We process steel, nonferrous metals, aluminum, titanium and plastics, On ... lathes, single spindle, multiple spindle and rotary transfer machines, ... In diameters ranging from 1 to 42mm. For more information see www.hanitec.ch
    > Read more
    Employees
    100 - 200
    Year of foundation
    1939
    Certifications
    ISO 9001:2008

    Watch

    CP Tech GmbH

    CP Tech GmbH from Büren has been part of the Nedschroef Group since June 2017 and focuses on innovative in-house products, engineering services, high-performance components and complete solutions for the automotive, motorsport and aviation industries. The focus of the corporate strategy is on the development of new mobility concepts, shaped by global trends such as e-mobility, lightweight construction, networking, sustainability and autonomous means of transport. With around 210 employees, CP covers the entire value chain from development through project management, production and assembly to testing and validation of complete vehicles. The core competence of CP lies in the production of high-precision lightweight components from high-strength steels and the interaction of hand-held welding processes, heat treatments, mechanical processing, including the associated device concepts. CP also has its own agency in Shanghai (China) and works there with various companies.
    > Read more
    Employees
    100 - 200
    Year of foundation
    2006
    Certifications
    DIN EN ISO 3834

    Watch

    CS Machine

    As CS Machine, we offer our customers unlimited solutions with our cooperation partners in Turkey to meet their complex parts processing needs thanks to our machine workshop, which processes the metallic and non-metallic parts with high precision. In addition, a large number of small parts can be produced with vending machines Our machining line has been certified with the quality management systems AS9100, ISO 9001, 14001 and 45001 in order to offer the best possible service with machines and systems of the highest quality. We also provide full control over the materials from the entrance to the factory until they are packaged and shipped from the factory. we stand behind the produced parts and attach great importance to continuous improvement.
    > Read more
    Employees
    20 - 50
    Year of foundation
    Certifications
    ISO 9001:2008

    Watch

    Gebr. SCHMID GmbH

    Punching and forming tools with its own tool. Production in lots of 1-100000 St. Processed materials: Steel sheet: 0.5-10mm VA-sheet: 0.5-3mm AL-sheet: 0.5-5mm MS sheet: 0.5-4mm, Cu sheet: 0.5-4mm Rod material are 15mm thick and 6m Length max. Tool dimensions: 900 mm max. Press force: 2500 KN Tube processing to D 200mm Deep drawn parts to D 250mm
    > Read more
    Employees
    10 - 20
    Year of foundation
    1954
    Certifications
    ISO 9001:2015

    Watch

    M.S. Metall- & Schweißtechnik

    > Read more
    Employees
    5 - 10
    Year of foundation
    2013
    Certifications

    Watch

    Meccanica Vimercati s.r.l.

    Meccanica Vimercati srl is a company that since 1976 has been dealing with high precision mechanical machining for third parties (turning, milling, grinding), for the production of special components for various industrial sectors (energy, machine tools, petrochemicals, packaging ...). In recent times, the company has also specialized in the production of various types of transmission components. We design and build Cages for bearings, back-up rollers and special bearings, transmission joints for lifting systems and for heavy industry.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1976
    Certifications

    Watch

    Hong Kong Bostec Company Limited

    Company Profile Bostec is a Hong Kong Enterprise company and established since 1993 to specialize in mould design, manufacture, plastic injection and product development. In year 2000, the company moved to China-Dongguan to take advantage of the economic climate there. For over a decade of expansion, our company has achieved the recognition of being an international professional plastic mould producer for our customers from Europe and Asia Pacific regions. Bostec has many years of industry experience. The staff have a consummate wealth of experience in mold design and process arrangements; and we have a complete range of plant machinery and equipment, with all kinds of mold processing equipment, such as: wire cut machines, precision surface grinding machines, semi-automatic grinder and vertical milling machines EDM and CNC machines, etc. We have strict and high-standard quality inspection equipments, such as: 50 times projectors, microscopes, a high degree of instrument rules, and a rigorous quality assurance program. Product design Bostec use professional software such as Pro-Engineer, Solidworks, AutoCad and UG etc. Customers can provide the 2D or 3D drawings in DXF, DWG format, and our professional engineers will offer the mould layout for customers’ further discussion within the short period of time. Quality Management Bostec is determined to improve productivity and focus continuously on innovation and up-gradation of its products and people. We are always customer orientated, and we specialize in quality assurance for this purpose, to ensure that products meet the most durable, high-quality levels, and the pursuit of overall customer satisfaction is our aim. Our values Bostec is founded on integrity and honesty in business. We value our customer as business partners and as a result, most of our customers are long term partners. While the mould and tool industry is a competitive and at times exploitative area, we here at Bostec are concerned with your well-being as much as our own, we strive to consistently provide only the highest possible quality products, at competitive prices and with perfect services. Bostec is sincerely seeking for cooperation opportunities to get a win-win situation.
    > Read more

    Watch

    Göltenbodt technology GmbH

    With over 50 years of experience in the field of metalworking, we manufacture complex components on the most modern 5-axis machining centers and CNC surface / profile grinding machines with the highest precision. For small to medium-sized lot sizes, prototypes as well as individual parts and fixtures, our modern march park offers a high degree of flexibility. Motivated and well-trained employees guarantee a consistently high quality of your production parts. Our long-standing customers from mechanical engineering, among others, appreciate our quality, reliability and flexibility.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1918
    Certifications
    ISO 9001:2015

    Watch

    PSFU Wernigerode GmbH

    The PSFU Wernigerode GmbH is a family business with 30 years experience in high-precision machining. There are not many companies in Europe that can offer such a comprehensive solutions for the flat, circular and non-circular profile grinding. In addition to our high-precision grinding technology, we offer an extraordinary know how in the fields of 5-achsis-milling and precision turning. We are partner of the automotive and mechanical engineering industries. Our customers include Europe's most important automotive, printing machinery, medical and machine tool manufacturers. Universal CNC machining centers allow the production of various precision parts and guarantee flexibility and capacity for prototype, in the single-part and series production. A separate tool and fixture completes the service to our customers.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1992
    Certifications
    ISO 9001:2015

    Watch

    Josef Schmieder GmbH CNC-Fertigung

    > Read more
    Employees
    < 5
    Year of foundation
    1985
    Certifications
    ISO 9001:2015

    Watch

    Comercalò srl

    COMERCALO 'srl Brindisi Italy Precision mechanical constructions. Turning, milling and grinding. We manufacture tools based on the customer's design and models (bonding, contouring and drilling tools, etc.) We produce spare parts with subcontracted material or with material supplied by us. We perform precision mechanical machining (milling, turning, grinding) The maximum dimensions of the pieces that we can manage are mm. 1600x500x500. We always have raw materials in stock such as 7475,7075,7050,2024, 17-4-PH, carbon steel etc. We can perform either mechanical processing and dimensional control only or we can supply complete parts of SURFACE TREATMENTS. As for the surface processes in Italy, our partners are Galvair, Metalsud and Tecnotrattamenti but we can also have the support of Galvatec in Spain and Mecacrome in France, with processes qualified by Boeing, Airbus, Bombardier etc. We build special custom equipment. For small series we are very fast in production. Our transport partner in Italy is GLS EXECUTIVE and in Europe it is DHL.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1986
    Certifications
    EN 9100

    Watch

    RINGHOFFER Verzahnungstechnik GmbH ...

    Our goal is to convince our customers through our performance, which is always oriented towards our customers' high requirements regarding quality and on-time delivery. The most modern production equipment, quality assurance during production, and optimized processes make it possible for us to produce with speed, precision, and cost efficiency, all at the same time. Regardless of whether we mass-produce for you, deliver popular models on short-term notice, or manufacture individualized single components according to your specifications - we are consistently working on optimizing our customer-oriented service. Bevel gears Hobbing max. Ø 250 mm, up to module 6 Splines Hobbing Grinding upon request up tp 1200 mm in length max. distance between centers: 1250 mm Sprockets Hobbing Shaping max. Ø 400 mm, up to 1 inch up to 1 inch Worms Chasing Milling Whirling Grinding up to module 3 up to module 6 up to module 6 up to module 7 Worm wheels Hobbing upon request Helical gears Tooth flank grinding max. Ø 300 mm, module 6 Spur gears Hobbing Shaping max. Ø 600 mm, module 6 max. Ø 500 mm, module 6 Timing gears Milling available on short notice, in stock: from module 0,5 to 10 mm and from partition 2 - 10 mm; up to 3000 mm in length External grinding up tp max. 270 mm, max. distance between centers: 1000 mm CNC drilling upon request CNC and conventional turning up to Ø 400 mm, length 1200 mm Surface grinding max. length 2000 mm CNC and conventional milling upon request Thread grinding upon request Internal grinding max. grinding Ø 200 mm, max. grinding depth 250 mm Grooving: milling, cutting, reaming up to 28 mm Surface treatment such as hardening, nitriding, etc. Centerless cylindrical grinding max. Ø 70 mm Racks (High-Precision Racks) Type of Machining Machining Sizes Milling available on short notice, in stock: from module 0,5 to 10 and from partition 2-10 mm up to 3000 mm in length Delivery program: Gear wheels, spur wheels, racks, snails, worm gears, worm shafts, chain wheels, toothed belt wheels, helical gears, bevel gears, splined shafts, pump impellers, any waves, flange. Nearly everything with teeth. Materials: Steel, high-grade steels, non-ferrous metals is processed such as copper, brass, aluminum and plastics in complete and wage labours. Thermal treatment and surface coating: Additionally to our achievements we offer still any surface treatments. Case-harden, nitrating, Nitrocarburieren, carburizing, sandblast, TENNIFER QPQ, as well as galvanizing, burnishing and the like. Our customers expect to get low-priced precision products from us, with short delivery times, reliable service, and constant high quality. This is exactly our strength - which is based on state-of-the-art production equipment, quality assurance during production, and optimized processes!
    > Read more
    Employees
    200 - 500
    Year of foundation
    1957
    Certifications
    ISO 9001:2008

    Watch

    Harald Wagenmann e.K Präzisionsmech...

    We, the company Harald cart Man precision mechanics are a medium sized company that, according to DIN EN ISO 9001:2000 certified. In the Middle Black Forest we are established and have been working for more than 30 years in the metal working industry. In our modern machinery, we manufacture small and medium series, as well as complete assemblies according to your drawings. Edit all common materials - CNC milling: CNC - Universal - Milling, up to 4/5-Achsen Machining centers up to 4/5 - axes Highest precision by 5-face machining (housing, etc.) High efficiency through multi-face machining (series production) - CNC turning: of forage machines with driven tools (Max Ø260mm) to short rotators with loading systems (max. ų80mm) for the series ranges here our spectrum - Grinding: Precision parts to be machined on IT 5 round and flat grinding machines By quality, reliability and punctuality we convince our customers who come from diverse fields such as engineering, mining, maritime, and aeronautical engineering, automotive and leisure industries. We would like to develop the best solutions for your needs with you.
    > Read more
    Employees
    5 - 10
    Year of foundation
    1978
    Certifications
    ISO 9001:2015