Delivery of castings and forgings including processing in Asia. The Asian partners have the appropriate approvals. ISO 9001: 2008 is granted. Approvals under the Pressure Equipment Directive (PED / AD 2000) or ship classification approval LRS, GL, DNV, BV available. Certificates available on request. Partner agencies on site to monitor the production as an indispensable part of our quality philosophy. Material: cast iron, ductile iron, cast steel, cast stainless steel, duplex Casting processes: investment casting, sand casting Form process: Hand molds and machinery forms Models: wood or metal

We develop and produce for decades Böhmler of precision turned parts, machining parts and assembling contact turned parts for the electronics and automotive industries. Our extensive know-how and our optimal production conditions may enable us to respond flexibly to needs and requirements of our customers. In consequence of this we have specialized in addition to the production on the assembly of miniature and special components. If you wish, we will also bring you our proven long-term project and material experience in the development of your products with a. What requirements do you have? Fast, accurate, flexible, cost-effective, just in time ... ? Try us once, you tell us what you need and we ... ... we rotate exactly your thing! Search Specialists and generalists in one? Looking for a supplier who can fulfill all your wishes? To compete in the national and global competition, we need solutions that meet the complex requirements and the increasing demand for reliability and flexibility.Thanks to the constant improvement of our production we can offer our customers a wide range of precision turned parts. Our products are mainly used in the automotive industry, electrical and control engineering. We supply precision turned parts of 1-32 mm diameter. At over 6,300 square meters of modern production area, we process materials of brass, steel, stainless steel, aluminum, bronze, copper alloys and profile materials. Of course, we have mastered the process for pre-and post-treatment and galvanic finishing On 6300m ² of modern production space we manufacture precision turned parts and contact parts and assembly parts including galvanic finishing and heat treatment for the electronics and automotive industries.

1- EXPERIENCE Z. MEK INDUSTRY is run by professionals who have over 20 years of experience in the field of precision engineering. Thanks to this experience, we are able to tackle complex projects and offer high-quality solutions. 2- TECHNIQUE Our multi-pallet CNC machining centers are equipped with the latest technology, which enables us to process small, medium and large batches with maximum efficiency. 3- VERSATILITY We supply a wide range of industries, including the oil and gas industry, the food industry, and agriculture. Our versatility allows us to tailor solutions to the specific needs of each customer. 4- FLEXIBILITY Thanks to our technical department, we are able to carry out processing according to the customer's mechanical drawings and technical specifications, thus ensuring a high-quality end product. 5- ACCURACY Every detail counts. Our focus on precision and compliance with measurement tolerances ensures that every product meets or exceeds quality standards.

CNC machining / mechanical engineering We are your competent specialist in the field of milling and turning as well as the production of high-quality machine components. Our many years of hands-on experience in these areas and the use of state-of-the-art CAD / CAM systems are the key to your success. We are working on CAD workstations with the SolidWorks 3D Solid Modeler. The CNC programs are created via SolidCAM. In addition, we have a CATIA interface. In this way, we guarantee prompt, individual solutions for your demanding products, both for individual parts and for series production.

As long-standing employees of mbb Maschinenbau Bogensberger, we took over 20 years of contract manufacturing of precision components in 2022 under the new name “mbc Maschinenbau Coban”. We are appreciated as an experienced supplier and contract manufacturer for CNC processing parts in Austria and in areas of Germany. The following keywords present our company: • Fair market prices thanks to modern and automated machinery • On time delivery • High-precision error-free CNC processing through integration of the CAD/CAM process chain • We are certified according to DIN ISO 9001:2015 • Compact structure/ short and fast decision-making processes • Our range of materials includes all materials, in particular steel, titanium, aluminum, copper, plastics, carbon fiber, metal matrix composite materials, etc. — we would be happy to test the materials you need too!

We produce your individual custom-made product according to sample, sketch or drawing - quickly, easily and at a fair price with the fastest possible delivery. Our CNC machines are technically up to date and our employees have unbeatable know-how. ReschTec - Fertigungstechnik eU has many years of experience in machining (milling, turning, drilling), and that is what you measure and see on every workpiece. We work with state-of-the-art machines and quickly come up with the latest CAM software to the desired product. The materials are cut using a band saw, which is ideal for machining metal, aluminum and plastic. When processing the parts, we comply with your requirements: Whether small and medium-sized series, item and sample production, we are your professional contact. Depending on requirements, we also undertake the refining of the materials. We treat each project and each workpiece with great care and attach great importance to quality standards. From quoting through production to shipping or pickup - we tailor our process to your individual requirements.

As a young, innovative company and competent partner for the manufacture of individual parts from the fields of medical, mold, fixture and mechanical engineering from all materials available on the market, we are a reliable and flexible partner for every application in the field of machining.

We are a bar turning and machining company based in Torrelles de Llobregat, Barcelona, established in 2000. We stand out for our state-of-the-art machinery park, consisting of 31 double head CNC lathes equipped with power tools and bar loaders. This allows us to produce high quality and competitive parts in a diameter range from 3 to 65. We work with a variety of materials, including steel, stainless steel, brass, aluminum and more. In addition, we have the necessary control elements to ensure the quality of our products such as digital roughness testers, profile projectors, hardness testers and the usual metrology elements of any turning shop.

Where is the highest quality, process reliability, smooth operation and process experience matters, develops and implements custom solutions NMH. Perfectly tailored to the individual customer requirements. With about 100 employees at its 88 367 Hohentengen we are marked by a performance-, medium-sized business culture. With qualified staff and modern technology, we ensure the expectations of our satisfied customers with our solutions. The 100 menstrong special machine and plant engineering company NMH GmbH + Co KG in 88 367 Hohentengen is in Upper Swabia, district Sigmaringen, about 30 minutes away from the Lake of Constance and adjacent to the districts of Ravensburg, Biberach an der Riss, Balingen and Lake District.

We are an industrial and commercial agency with direct suppliers and production facilities in Poland, Czech Republic, China, Italy, Taiwan, India, Turkey and Germany. We design and produce together with our partners to our customers in the following areas: Welded structures such as caddies, storage racks, long-product pallets. Steel construction, welding in general. Surfaces such as rays, galvanizing, painting, powders. Sheet metal processing all materials: CNC punching, nibbling, edges, laser welding, cutting Fully automated bending center, powder coating, Deep drawing, laser cutting, punching from coil, components, Services according to customer requirements Turned parts, milled parts made of all materials Castings and their processing Plastic injection molded parts up to 2,500 grams weighing, + Toolmaking Extrusion plastic profiles Aluminum profiles and their processing Cable assemblies, wire harnesses, control boxes and control cabinets completely Agricultural Engineering Bent wire parts Diecast Bend and process tubes

We have years of experience in machining and electroplating. We provide one-stop services from consulting and CAD and CAM to procurement of materials, fabrication, and delivery. We approach each job focusing on reliability, professionalism, and on-time delivery. We provide routine progress feedback. Our extensive processing facilities provide high capacity for different work methods (including milling, turning, and cutting). Your business is always welcome!

MaS - Solutions offers top-notch surface finishing and industrial painting for small parts, as well as assembly of components. Our expertise in surface refinement and precise assembly processes ensures the highest quality and efficiency. Trust us to deliver your components in perfect condition and on time. We are your reliable choice for industrial solutions.

Globus Thermoplast GmbH has been firmly established in Schwentinental near Kiel for many years now, where it has specialised in the extrusion and processing of high-quality thermoplastics. We supply a wide variety of customers from a vast range of industries and regions with semi-finished products and machined components. Globus combines the innovative power of a modern German manufacturer with the down-to-earth nature of a tradition-conscious company with future-oriented strategies. Our many years of experience in plastics processing form our solid foundation.

Special machine for Wagner: Everything does not exist! We live innovation and look forward each time on new challenges! Whether targeted conversion of trucks, whether trailers, industrial plant or special solutions for your needs - Wagner Special machine puts your desires to professionally! Mechanics, hydraulics, electronics - we have the professionals at work We analyze the present problems and develop inter-plant solutions! In Wagner the planning and implementation of electronic, hydraulic and mechanical components are. So that we can surprise you with our solutions. Over and over again. Produced entirely in Germany We guarantee our machines! For that reason, we never use on purchases from abroad. We build your products completely in our own workshop. Whether special size or special solution - where it says Wagner Wagner is also in there. And only Wagner!

For over 30 years, we deal with the editing and production of finished precision parts from all common materials, and components and complete devices. After we have expanded our machinery continuously over the years and modernized, we are now able to offer a very wide range of processing options in the field of machining precision parts manufacturing. Our small, medium and large series production covers an area 3-65 mm diameter of the rod in complete machining (Axial - radial and tool support) as well as the range up to 600 mm diameter in food processing. We manufacture according to your drawings or samples in batches of 10 pieces, including patterns and 0-series, to 100,000 units. For over 20 years we have manufactured parts for rotary connector systems. Our manufacturing facility in this area has been designed according to the requirements for the production of such parts. We offer our customers the opportunity to purchase fully pre-finished parts, including surface treatment, assembly of components to form units and a customizable delivery, tailored to further processing. We have carried zoom requirements, evolved in this area in recent years, according to our customers Interressenten and strengthened us to a system supplier. Devices, special tools and special equipment are coordinated and adapted to the particular processing task, created by ourselves, so that a possible production to optimum, efficient and economical points of view can take place. For the control of these special facilities we have collected from the use of freely programmable PLC controls extensive experience and knowledge of the use and programming of such. A computer-aided quality management system, we have installed and are thus able to document inspections during production. We try to meet the different requirements and demands of our customers to be able to fulfill in every respect. The parts manufactured by us find application in diverse industries. Essentially, these are the automotive industry with its direct suppliers, the electronics industry and switchgear manufacturers, producers of aggregates and systems for gas and control technology and the general mechanical and plant engineering.

Turned-Liebermann 35 years of experience in the manufacture of precision turned parts, a continuously renewed machinery and a highly motivated team, turned parts Liebermann your partner for automatic turned parts. Fast, flexible and cost-effective to work for our customers is our business goal. Quality is our standard. History The company Theo Liebermann was founded in 1972 by Theo Liebermann and his wife Maria Luise Liebermann. First, the production took place in improvised workshop rooms that were in the basement of the apartment building. There machines were used, which were taken over by the former employer. First orders the company received Theo Liebermann from other turners. In 1988, the turning shop "Peter watches" was adopted. The move to the new production facilities was 1995. In 2003, Mr. Ralf Liebermann the management of the operation. In 2006 the company was in Liebermann GmbH & Co.KG renamed. Currently 14 employees work in the company. Products On 6 multi-spindle machines from Tornos, 16 Long-moving and a short turning automatic turned parts are manufactured with high precision aluminum, steel and brass. The parts produced have dimensions of about 2-20 mm in diameter and a length up to 250 mm. News Commisioning of the new CNC lathe machine In August 2007, our long-turning machine was taken from the type "Star SR 20 R II" in operation. After extensive training and several test runs the end of August already completed the initial customer orders on the new machine. The results obtained turned out so positive that already in the spring of 2008, the purchase of another machine of the same type is planned. In the future, we will contribute by investing in new technologies to further improve the quality of our products and to respond more flexibly to the needs of our customers.

- Laser cutting of metal sheets and pipes - Quality welding to DIN 18800-7 "B" - Assemblies - Bending and folding - Punching, stamping and pressing parts - Water jet cutting - Laser marking - Vibratory Finishing - NEW + + + laser parts and folding up to 4 m in length Services For customers, we are problem solvers, and partners. - From a simple laser part to complex assemblies we manufacture everything according to customer requirements. Whether from a hand sketch or a DXF file: Together with our clients we find the solution. On short-term supply needs, we respond flexibly and simultaneously meet all quality requirements of our customers. The surfaces we deal with experienced partners. - Laser cutting Steel: 25 mm thick in size 4000 mm x 2000 mm VA: 25 mm thick in size 4000 mm x 2000 mm Aluminium: 15 mm Thickness in the format 4000 mm x 2000 mm - Laser marking VA, aluminum and brass up to a size of 400 mm x 600 mm - Water jet cutting Virtually all materials in the format of 4000 mm x 2000 mm Please queries whether the desired sheet thickness is available in stock. - Bending and folding Steel: 5 mm thickness and 4000 mm length VA: 4 mm thickness and 4000 mm length - Welding All common welding processes such as MIG, MAG or TIG steel and VA

Matrices y Moldes JFM specializes in the construction of tools and cold stamping of metals. We work in a wide range of sectors: automotive, consumer electronics, construction, air conditioning, packaging, leather goods, naval and railway, among others. We develop our products alongside our clients, which allows us to provide an excellent price-quality-service ratio, always striving to meet their needs. We operate internationally with up to 55% of our sales exported abroad.

consultation Plastic is not just plastic, the choice of material plays a crucial role in the strength and durability. Through our many years of experience, we find for their application of more than 75 material variations the suitable plastic. We camp for you! In our warehouses, we keep your call orders ready, thus we guarantee maximum flexibility and shortest delivery times.

WHO WE ARE History of the company “INTERSKELE-LEŠKO” dates back to the 80's as a craft and the beginning of its activity is focused on machine metal processing. The company has been constantly evolving over the years with technologies and machines like CNC turning and milling, sawing, TIG and MIG/MAG welding, hydraulic press, and machines for polishing stainless steel. Our advantage is flexibility and complete customization to customers' wishes. Our team is available to costumers all the time for mutual agreements. We supply construction equipment on domestic and foreign markets. With the constant presence on the market we felt the need for producing stainless steel elements. So today we have more than two hundred high quality stainless steel elements in the production process

The company Unruh Maschinenbau was founded in September 2016 by Elix Unruh as the owner. The range of services included the contract manufacturing of various milled and turned parts. In August 2017, the company Jansen & Bahlo GmbH in Bad Salzuflen, which had been operating successfully in toolmaking for decades, was taken over. The merger of the two companies resulted in Unruh Maschinen- & Werkzeugbau. With the takeover of the toolmaking company, we were also able to gain very well-trained specialist staff with decades of experience. In the short time, our company recorded very good successes, so that we now employ eight people.

We offer metal processing and machining technology with high quality standards and individual manufacturing solutions for your components. We are specialized in contract milling work, individual and series production, component manufacturing, welding parts processing and die-cast part processing. Our goal is to offer you high quality and at the same time implement your projects quickly and cost-effectively.

The KAMAR-CNC company was established on the initiative of two ambitious people who spent years gaining experience as operators and machining technologists. Working with machines allowed us to learn from the very beginning the technological process and the problems faced by today's CNC market. We know how important the timeliness, quality and precision of the details are. We deal with unit and large-series production. We approach the tasks entrusted to us with full commitment. We strive to ensure that our services are at the highest level. Today we are 8 people and we have 4 new CNC machines We invite you to contact us and cooperate. Mariusz and Kamil

We are a company located in Koszalin, Poland. We operate on Polish market as well as in Western European countries. We offer a wide range of services in the field of metal processing: welding, metal sheet cutting, bending, machining, painting. We provide comprehensive service at all stages of implementation. You can count on consulting in the field of technology and construction, as well as the exact implementation of even the most difficult projects (including details with a high degree of complexity and accuracy). We are ready to cooperate with You.

KOWE is a reliable partner for companies in the fields of mechanical engineering, automotive, metal and woodworking, medical technology, and aviation. The success of our turning and milling operations depends on the success of our customers and the performance of our employees. Ensuring the quality of our turned and milled parts goes without saying. But we do more for our customers. We also provide advice on how to manufacture the products in a way that makes them even more technically and economically advantageous for them. To understand and meet customer needs and requirements, one must engage with the customer and actively listen. We are a part of their products, solutions, and quality – WE ARE PART OF IT, and proud of it!

WEDO Automotive GmbH is a daughter company of Lutz Precision, s.r.o. Lutz Precision is a global leader among suppliers in the field of resistance welding. The company´s core business is manufacturing of machines and tools for tipdressing and changing copper electrode caps of welding guns. Lutz Precision is headquartered in Central Europe - Bratislava, Slovakia. The company has a global reach through subsidiaries, distributors and partners in Europe, Asia, North and South America. The product portfolio includes tipdressers, cap changers, electrode management centers and accessories such as cutter tools, blades and magazines. The engineering department provides complex solutions designed to meet all customer requirements. Internal robotic testing centre KUKA is used to simulate the welding process, helping to develop innovative and competitive products. Lutz Precision´s customers are mainly automotive manufacturers, line builders and OEMs. However, the machinery portfolio enables the company to meet subcontracting demands for other industries as well.

The company Paul Weber GmbH & Co. KG was founded almost 80 years and now has its headquarters in Herrenzimmern in Rottweil / Germany. With a complete range of precision turned parts, we supply our customers nationwide and internationally. Our main products: Turned parts, eccentric, round, square, hexagonal, flat, profile Precision turned parts, CNC turned parts, machining parts, turning parts short, multi-spindle parts, Rotary transfer machining parts as * Expanding nuts, bolts, screws * Locking pieces, * Valves * Banjo bolts * Eccentric bolt, eccentric, * Bearing pins * Terminals * Rivets * Jacks * Standoffs with milling the thread, Standoffs * Fittings * Sleeves We process these materials: * Cutting steel, stainless steel, stainless steel 1.4305, * Brass, non-ferrous metals, * Copper, copper alloys, * Special alloy * OSNA CU * Aluminum, aluminum alloys * High-alloy steels

Schulte-Tengler GmbH is your partner for precision turned and milled parts. - Precision is not a godsend! - On an area of 2,500 m², we use the most modern machines to manufacture precision turned and milled parts with a diameter of 3 - 450 mm and lengths of up to 800 mm. According to your specifications, we deliver ready-to-install, including all rework, spaces, as well as surfaces and heat treatments. Our customers are spread across a wide variety of industries, e. B. - Automotive - Mechanical engineering - Wind turbine construction - Electrical engineering - Fastening technology - Hydraulic component construction uva.

Metech Zella-Mehlis GmbH has many years of experience in manufacturing, which is based on diverse customer and supplier relationships. As a family company whose roots go back to 1941, we established ourselves as an independent company in 2013 and are proud to be able to pass on our extensive know-how and expertise in the field of metal processing to our customers.