The Anant GmbH is a marketing subsidiary for own products & representation for few well-selected Indian manufacturing units. We have a good knowledge + experience for quality systems & supervised manufacturing outsourcing from India. Our German representation offers a potential to take up a responsibility to supply the article as door delivered & being your contact/contract partner. whereas our Indian technical team offers possibly of economical in-house manufacturing as well as local outsourcing under our supervision & our own quality control. At Patel Technomation - India, We have the experience and capability of sub-contract CNC machining including supply/procuring of foundry and forging products in small batches as well in large quantity. We follow the TÜV SÜD ISO 9001-2000 quality system and are dedicated to providing excellent customer service, and the timely delivery of quality products. Our Manufacturing unit is located at major Auto-parts manufacturing, Casting, Forging & engineering hub in India; which offers us a good development possibility for any specific/special part manufacturing possibility in a most economical manner.
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    2006
    Certifications
    ISO 9001:2015
    Mario Fernando Group s.r.l. is an Italian company specialized in the cold deformation of metal sheet, in particular of stainless steel and aluminium. with over 55 years of experience in the planning and construction of high quality dies our aim is to become a model for the processing of metal sheet. We can realize dies for drawing, deep drawing, bending, trimming and blanking, according to the customer's drawing. Mario Fernando Group s.r.l. offers the mass production of metal stamped parts: the dies are realized according to our customers drawings and the production managed to meet the customer’s requirements. Our company proposes innovative solutions to the most complex technical problems becoming partner of our customer for the whole process of transforming an idea into a mass production work, even with the design of special machines according to our customers’ production needs, to give support that goes beyond the tool realization. This is what we mean with partnership. Our company is ISO 9001:2015 and and IATF 16949:2016 certified.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1967
    Certifications
    IATF 16949:2016
    Goodwill Precision Machinery Co.,Ltd (GPM),is a China manufacture established in 2004, Specialized in offering precision machining service for non-standard mechanical parts, spare parts, metal fabrication, precision welding, design & assembly, fixture and jigs with supplied drawings, prototype,CNC precision machining,customed machining parts...... Manage our company with ISO9001:2008 , TS16949 ,ISO13485 .ISO14001 certificated, customized ERP & Barcode Scan System. Our advantages: Easy to communicate in English,German,Japanese One Package Services Fast lead time Stable Quality Rigorous work attitude No quantity limited
    > Go to profile
    Employees
    500 - 1000
    Year of foundation
    2004
    Certifications
    IATF 16949:2016

    Watch

    Techpilot Premium Member
    PMT GmbH
    Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials. We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more! We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2005
    Certifications
    ISO 9001:2008
    The owner-managed company Aloys Kleier is a service company in the field of small-scale component manufacturing, hardware and electrical installation. As a cooperation partner of the industry, we bring by screws, rivets, welding and gluing together on 4000 m² of production space, what belongs together. In addition, our staff have many years of experience in the fabrication and installation of staircases, ramps and railings, pipelines, metal and welded constructions of all kinds Our range of services is complemented take over all activities of a classic Metallic, ie including sheet metal and metal processing including welding, Kant, drilling and sawing and we done quickly and efficiently. The customer gets to us all from one source. We service the products from purchasing to warehousing, manufacturing, assembly, logistics and all emerging problems. Flat hierarchies fast communication and flexible production methods are guaranteed. All orders we carry uncompromising from the complete satisfaction of the client. Partnership based on trust and maximum quality form the common success for both sides and are the basis for a long-term cooperation.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1982
    Certifications
    DIN EN 1090
    Consortium of companies operating in the development of foreign markets. It acts as sales department for the export of a number of small medium-sized industries located in the Veneto region, all operating in the sub-supply in the mechanical industry. Our partners can offer, among others, the following main operations: • Turning • Milling • Grinding • Gear Making • Cutting and bending of sheet metal • Sheet Metal Forming • Assembly • Complete Subassemblies Operative Office in Corso Fogazzaro - Vicenza IT
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2011
    Certifications
    DIN EN ISO 3834
    About us Kreutz & Mock is a medium-sized company and the leading manufacturers of wire bending parts of all types. With over 3000 different articles we can offer our customers a wide and diverse range of different wire products. The necessary machines for the production are developed and built in-house by our own engineering department which gives us the possibility to always be flexible according to our customer's needs. You can find further details about us and our philosophy on our website. Products We manufacture wire bending parts in all sorts of variations and models. We supply many industries with our products like the automotive industry, construction industry, agriculture, blinds manufacturers and many more. We also have numerous technical bent parts in our repertoire. We are happy to try to achieve your specific needs and requirements, because quality, punctuality and being in step with actual practice are our basic principles to deliver high quality as well as best functionality products. It does not matter whether they are single quantities, small quantities or a large series. We are flexible and deliver quality at fair conditions. We offer + Qualitycertficate DIN ISO 9001:2008 + in-house specified tool construction + in-house machinery construction + quick production of samples + technical and experienced know how + skilled telephone service + large production spectrum Materials Every material processed in our factory has a dedicated inspection certificate that will be provided with your delivery on request. We manufacture bent wire components for you in all variants and materials. Here a selection of the materials used: + Stainless steel wire 1.4301, 1.4310, 1.4362, 1.4401, 1.4404, 1.4571 in different tensile strengths + Spring steel wire 0.9 mm to 6.0 mm. Qualities A, B, C, D + Steel wire C9D bare or copper-plated. C9D soft galvanised in 1.0 mm to 8.0 mm + Crapal wire + Becrosi valve spring wire + Silver and Palladium wire
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1934
    Certifications
    ISO 9001:2008
    Company Profile Since 1991 Our family manufactures customized solutions made of plastic. In Gornau at Chemnitz today about 50 employees in the fields of semi-finished product processing, container and equipment construction, plant construction and cleanroom technology operate. Our solutions are used in industries such as machine and plant engineering, medical and environmental technology, the semiconductor industry and photovoltaics. The high quality of our products and services is evidenced by the certification of our company according to ISO 9001:2008. The internal design office as well as the technically and technologically advanced manufacturing guarantee our customers a comprehensive and high-quality advice and support. Involve us when planning your plastic just solution. Illustrate With our experience and the available CAD technology and we work out the best solution. We are happy to solve with our know-how your challenges. Products / Services Semi-finished processing Behälter-/Apparatebau Transparent Plastics Wasser-/Labortechnik Cleanroom technology Semiconductor engineering / photovoltaics Piping systems / special fittings Prototyping / Rapid Prototyping Machine technology With a well-equipped and very broad machinery, we can meet diverse customer needs. CNC lathe turning length up to 500 m 2 Milling Machine CNC 3-axis 1000 x 1300 x 160 Milling Machine CNC 3-axis 2300 x 1300 x 160 Milling Machine
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2001
    Certifications
    ISO 9001:2015
    Our production is divided into the areas of mass production and small series. The individual areas are internally managed as profit centers to ensure a high flexibility and short response times. Production and logistics are consistently oriented methods according to the Lean management. Implemented production controlled in our Hubert production system in which, for example, by Kanban and the material is provided by a milk run. Series production: Our strongest sales department - mass production - is divided into three areas. The individual areas are handled internally as a professional center to ensure high flexibility and short response times. Complete machining of rotationally symmetrical parts In the first area rotationally symmetrical parts are manufactured to customer specifications. The turning diameter is able to move between 10 and 250 mm, the majority of our turning centers is also equipped with C-and Z-axes, so that simultaneous milling is possible.With a batch size from 500 to 100,000 pieces we are to beat the effectiveness hardly. Also, hard-machining of turned parts on our machines without any problems Production of linear guide elements The second division produces linear guide elements in gray cast iron and steel. Here is the highest precision for general engineering. The products are fully managed by us. Starting from the cast blank through to shipping the finished part. Short delivery times mean for the customer that the Storage can be reduced. Drilling and threading specialist Our third area that specializes in drilling and threading. The team provides fasteners for the Automotive industry and components for linear motion ago. On average Hochleistungsbohrzentren be edited to large batch sizes Small series production Our department small series production the most advanced technologies will be used Small series and racing components As a supplier of parts and small series we are known for high accuracy and short delivery times.We have our inter alia, a 5-axis Bearbeitunszentrum available Sample parts A wide variety of sample parts for pre-production, eg for the plastics processing industry are manufactured in-house Service: You can transfer services to us, which we implement according to your special requirements. Material procurement Procurement of ► bars ► Steel Pipes ► Forging / raw castings ► special materials ► plastics Heat and surface treatment The finishing of our manufactured products, such as heat treatment or surface treatment, we have developed in cooperation with competent partners Assembly / Packaging / Storage We realize the production, assembly, packaging and storage of components Vibratory Finishing Deburring and polishing of surfaces can be performed in our Vibratory Finishing Machines
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1988
    Certifications
    ISO 9001:2008
    Dograr Metal is tube, section and sheet metal processing firm that was found in 1970’s as a family business and today, it is continuing its operations with 72 employees and broad selection of machinery in the quality level of ISO 9001:2015. Our major clienele from HVAC to machinery sector are placed in Italy, Germany, Switzerland, Finland, France and Poland. As of 2022, we are member of German-Turkish Chamber of Commerce.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1970
    Certifications
    ISO 9001:2015
    We are a company founded in 1998 with three employees. We manufacture montage mature Präzisionsdrehteile from 3 mm to 65 mm in diameter after drawing our customers very latest CNC long and short lathes. Sample parts up to large series, and very fast determination of additional capacity lathes purchase for customized turned parts. We work on: We machine vending machine, use, construction and heat-treated steels, stainless and acid resistant steels, high speed steels, brass, copper, bronze and aluminum. 11SMn30 + C or Pb, C45, C15, ETG100, S235JRG2C 1.4301,1.4305., 1.4104,1.4404,1.4571,1.4567, AlMg 0.5 Si (1), AlCuMgPb; CuZn39Pb3 (MS58) and others We manufacture according to drawings or samples. Our know-how, quality, flexibility and punctuality are our strengths. Our product range extends from bushings, rings, plugs, sleeves, piston, pipes, among others Kunstoffdüsen Surface treatment such as electroplating or curing complete our performance.
    > Go to profile
    Employees
    < 5
    Year of foundation
    1998
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    Komot d.o.o.
    www.komot.eu
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1989
    Certifications
    DIN EN ISO 3834
    METAL INDUSTRIES is a company specialized in metal constructions for industrial use. Founded in 2012, METAL INDUSTRIES expanded rapidly and immediately had well-known and respected partners locally. METAL INDUSTRIES S.R.L. specializes in metal constructions with or without processing for industrial purposes. Since 2012, 90% of production has consisted of exports to Germany, the Netherlands, Belgium, Norway and France. In all these years we have managed to build strong partnerships, constantly trying to improve the quality of our products, our technical equipment and the mastery of our employees. At present, our company has 25 employees. Equipment: 6 kW fiber laser cutting machine 1500x6000 (year 2022) 1.5 kW pipe fiber laser cutting machine (until 160mm diameter) year 2022 CNC bending machine (LVD 4000/220 tons, year 2015) CNC cutting machine (Haco) CNC cutting machine with hypetherm plasma, year 2015 CNC cutting machine oxy-acetylene CN bohrwerk (miling & boring tos machine) Grinding tos machine, turning CN, Proma, year 2015 Band saw machines Mig-mag welding machines (9) Vig welding machines (3) Punching machines (3) 5 ton aerial cranes (1) We produce assemblies or subassemblies for different industrial machines: packaging machines, machines for the production and processing of cardboard, wood processing, production of polyethylene pipes, etc. Through our collaborators we offer surface finishing services: sandblasting, galvanizing, painting.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2003
    Certifications
    DIN EN ISO 3834
    "MES-SAC Family produce for you by using their experiences and technologies in the most efficient way" MES-SAC started its operations in 2014 with the decision of the founding partners to combine their 25 years of experience. 25 years of experience gained; Quality of semi-finished flat steels, pipes and profiles in National and International markets in the field of Defense Industry, Automotive Sub-Industry, Medical Industry, Electric-Electronic Industry, Telecommunication-Signaling Systems, Renewable Energy (GES-HES-RES) Systems with knowledge, experience and energy. It operates in the fields of procurement in accordance with the processes, designing, processing with the latest technology machines, machining, surface treatment and assembly with contracted external suppliers. Our company, which keeps customer satisfaction ahead of all facts, aims to produce high quality products, thinking that development and high quality are focused on education and human investment. It carries the mission of following the change, transformation and technology in the sector and improving the product quality. At the same time, with the understanding that it is a duty to leave a better world to future generations, we are committed to developing the principle of “environmentally friendly production”, keeping nature, human and environmental protection at the forefront in our production, to comply with the legal regulations by applying occupational health and safety rules in all our activities
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    Certifications
    DIN EN ISO 3834
    AT4B Poland has possibility to produce some components according to your needs and drawing. We offer machining services by producing parts : bushes, flanges, bearings, couplings, nuts, pin, cones in metal, stainless steel, brass, aluminium, plastic, POM etc. for ex. heating, agricultural industry. AT4B makes precise milling and CNC turning in average and big batch. On our profile you will find information about company and photo on which you can see what we do. It is only part of our job. I invite you to contact with me according to above. I'm looking forward einquiries from you - this will let us to make calculations and compare prices. Our modern machine park is systematically modernized to guarantee adequate levels of technological capabilities, quality and competitive prices for our loyal customers. We want to provide a service in the manner you deserve: we ensure that our products are of good quality and on time, our customers both: domestic and foreign are very satisfied. In addition, thanks to fellow companies we can perform comprehensive services for example: parts machined heat treated with a specific hardness and strength or cover the parts of the protective coatings. We perform extensive services for example: parts machined heat treated with a specific hardness and strength or cover the parts of the protective coatings. Our team of qualified professionals are all experienced in the industry and together we create a harmonious team, sharing modern technologies, technical thought and experience. Our products are of good quality, delivered on time. We have satisfied domestic and international customers. AT4B it is qualified specialists, modern machinery, quality products and machines, timeliness, reliable logistics and low pricing. Our company was found in 2011 in response to market demand and the accomplishment of tasks. Contact us if you are interested in working with us.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2011
    Certifications
    ISO 9001:2015
    BALSTER, s.r.o. is a company active in the global area of engineering production, we offer you: = Casting: - hand moulding (sand casting) - machine moulding (sand casting) - continuous casting - gravity die casting - investment casting - low-pressure casting - modelmaking = Sheet Metal Processing: - bending / folding - laser cutting 2D, 3D - punching / pressing (Out-of-tool) = Welding: - MIG/MAG, TIG - manual electrode welding - robot welding - spot welding = Welded constructions / Structural Steelwork: - machine frames / bases / racks - welded constructions (weldments) = Pipe & Tube Manufacturing: - pipe bending - pipe forming = Turning = Milling = Drilling / threading / tapping = Surface Treatment: - powder coating - wet coating - sand blasting - spray-painting - annealing - hardening - induction hardening We provide our customers with professional global services from the drawing to the delivery, including the quality control, packing and the transportation of the finished products.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2009
    Certifications
    ISO 9001:2015
    We are a leading manufacturer of state-of-the-art, top-notch vacuum components, either large series and/or tailor-made batches ! We are committed to matching our precious customers material handling requirements with the best solutions on unrivalled terms and conditions. We are looking forward to a successful collaboration with you. Please feel free to contact us -24/7-, I will be utmost delighted to submit you an unbeatable offer. Thanks in advance for having us. Diamantino S. ISIKCEVAHIR (MSiE) (Global Business Development Manager)
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1993
    Certifications
    ISO 9001:2015
    Engineering & production - from a single source We offer you a complete all-round service in the field of plant construction in the railway technology, aerospace, automotive and special machine construction sectors. With our modern technology and competent team it is guaranteed that your order is carried out with conscience and that the end result is always of the best quality. credentials With over 1250 satisfied customers and locations in USA and Europe, Metriklab is in the best position to carry out your engineering and automation orders.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    2021
    Certifications
    ISO 9001:2015
    A Czech-growing small businesses (20 staff) offers its services in the metal working, equipped with modern machine stock. - CNC milling - Wire EDM - CNC Turning - Drilling - Grinding, etc. We process Alumunium, steel, brass, copper. We provide the best price, highest quality and reliable deliveries.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2000
    Certifications
    ISO 9001:2015
    We focus on developing and producing high-quality, pre-finished parts, components and systems of metal, which are available also, including industrial surface treatments. For this purpose, stand 15.000 production areas in Germany and low-wage countries. With our experienced staff and a held on the current state of the art machinery, we provide for each task within our manufacturing range a solution - fast, flexible and cost-conscious.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2010
    Certifications
    DIN EN 1090
    The Company Established in January 2004, we are a modern company in the field of sheet metal processing and supply. Our Strength: * a company philosophy aiming at customer satisfaction * flexibility by means of a clear company structure * quality management DIN ISO 9001/2000 * excellent price-performance ratio * state-of-the-art machinery * conveniently located with regard to transport facilities (directly on A 73) * a wide product portfolio with high flexibility Besides classic sheet metal processing, our product portfolio also includes laser cutting of sheet metal, pipes and profiles as well as edging on CNC-controlled machines. Sheet Metal Processing * welding with WIG * welding with MAG / MIG * drilling * riveting * surface treatment * laser cutting * edge bending * resistance welding * turning * milling * spotwelding Surface Treatment * chromium-plating * galvanising * powder coating * sandblasting * varnishing Laser Cutting: Constructional Steel, Stainless Steel, Aluminium TRUMATIC L 3030 Size 1500 x 3000 from custom-made articles to small series to mass production Laser performance package The machines of the series TRUMATIC L 3030 series are equipped with the TLF 4000, a laser of the latest generation by TRUMPF. The machines of the series TRUMATIC L 3030 series are, thanks to this powerful laser combined with an extremely quick laser power control, not only capable of quick cutting of sheet metal, but also of cutting materials of high thickness such as 20 mm thick constructional steel. CNC-Edging and Bending incl. Bend Angle Sensors Hydraulic CNC-edge bending presses bend or stance exactly fitting components - economically and flexibly: * minimized set-up time due to freely programmable X- and R-axis and fast tool-changing-system * electro-hydraulic slide engine in proportional valve technique * multi-axle CNC-back gauge in X and R * self-centring upper tool adapter * hardened lower tool adapter * a large edging clearance and extensive variability in stroke, daylight and throat allow a wide product portfolio * minimal operation and secondary processing time also with Z-edge- bendings due to no necessity of turning the element * high repetition accuracy due to CNC-camber * laser-hardened edge bending tools * angle sensor ACB
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2004
    Certifications
    ISO 9001:2008
    Our company specializes in sheet metal- and profile processing. The latest CNC technologies, software and productivity helping us with high productivity to advance. We offer document processing, laser or water cutting, bending, welding and surfacing including reliable delivery. In addition, we offer experienced German speaking welder, pipe fitter and foreman for pipe assembling. Our employees gained experience on various construction sites throughout Europe, see below www.industriemontage.sk. Our products match with the strictest European standards. The company is certified with ISO 9001: 2015. The main aim of our company Industriemontage is the satisfaction of our customers, especially with the quality of the manufactured products, together with just in time delivery. More about us can be found on our website: www.industriemontage.sk
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2014
    Certifications
    ISO 9001:2008
    Welcome to our Techpilot page - I am glad that they visit us! The company Ing Marc Gruber KG -. Tirolaser is a medium-sized company from Lower Tyrol, more precisely the Zillertal, which specializes in the field of contract manufacturing in the field of sheet metal technology. Our core competencies lie in the field of laser cutting of metal sheets and pipes (steel, stainless steel, aluminum, copper, brass and titanium) and in the further processing of these blanks by bending, welding, surface treatment and assembly etc. We are happy to support them in carrying out their projects in the field of development / design and prototype production through our affiliated engineering office for mechanical engineering. they too can benefit from our 20 years mittlwerweile experience in this area. Solletn you have any questions, do not hesitate and grab them to the phone - we will be happy to give them help and advice! Your TiroLaser team Marc Gruber
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2015
    Certifications
    DIN EN ISO 3834
    We are a competent and motivated team with an optimal price-quality ratio, which specializes in the area of pipeline manufacturing. Select Tube GmbH quickly and cheaply manufactures just-in-time required parts according to samples or drawings, from prototypes to small series. Pipes in the materials steel, stainless steel, aluminum, winding tube or copper. Quality with which we convince: - High flexibility, even for short-term requests - High vertical range of manufacture - Piping systems completely ready for installation - Reliable customer service from the offer through production to delivery - A young team that will be happy to advise you on all aspects of piping systems - Production according to sample management, if no documentation is available
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2016
    Certifications
    ISO 9001:2015
    RS Traut develops and produces prototypes, series and spare parts. We offer products and solutions for automotive, aviation or other industrial applications - from simple bent parts to complex assemblies for tubes from 0.8 mm to 40 mm in diameter in all materials
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1997
    Certifications
    ISO 9001:2008
    The GW St. Pölten is a modern industrial enterprise blank. The focus of the company with around 440 employees ranging from industrial parts manufacturing to production of components and complete systems. Advice during the development and construction phase completes the offer. Thanks to the greatest possible flexibility, the company is fixed and competent partner for many customers at home and abroad. Long ago, the GW St. Pölten has made as a modern problem solver a name. The different production areas such as metal working and processing, electrical installation, signage, etc. are equipped with advanced production facilities and therefore allow a high degree of vertical. The high standard of management, production and the products and services is impressively confirmed by a number of certifications in the fields of quality, environmental management, occupational safety and product quality. The ÖNORM EN ISO 9001:2008 certificate and the Austria Quality Seal are the best evidence. OUR PRODUCTS AND SERVICES Metalworking and PROCESSING Machining and Forming Technology with advanced CNC machines, assembly of complete assemblies, components manufacturing including surface treatment, serial production, sheet metal fabrication, welding and much more. ELECTRICAL ASSEMBLY / CABINET Partial and final assembly of electrical components, control systems, and manufacturing of complete enclosures and cable assemblies for mechanical and soldering work. Unlisted panel builder in accordance with UL 508A Manufacturer processed wire and wiring harnesses. SIGNS PRODUCTION, milling, engraving, POWDER COATING Signs in single or serial production to production of building control systems, including on-site installation. GENERAL ASSEMBLY Installations of all kinds, execution of various packaging, Kuvertierungs, sorting works and recycling activities. TEXTILE WORKS Curtain assembly and sewing of all kinds with the exception of clothing confection. Plastic injection molding / ZINC DIE-FOUNDRY Injection molded plastic parts to glass fiber reinforced plastics. Production of zinc die castings and surface finishing including finishing and assembly.
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    1981
    Certifications
    ISO 9001:2015
    We produce turned and milled parts according to the highest quality requirements. The processing possibilities, surface treatments and a modern warehouse combined with fast and efficient logistics management make us the ideal partner for your projects. Our components can be used in gaskets, co-molded with other materials, used in the assembly of other components such as gears, valves, plastic manifolds, etc. We are able to supply turned parts with complex geometries and elaborate milling jobs (e.g. asymmetrical geometries, cross holes and threads) up to a diameter of 60 mm Long turned parts with diameters from 5 to 22 mm and a turning length of up to 200 mm (milling work using the y-axis) CNC turned parts with diameters from 5 to 65 mm (e.g. with face milling for keys, eccentric operations and trapezoidal threads) Circular turned parts (e.g. with milling and threading) THE MATERIALS WE ARE ABLE TO WORK: Stainless steel eg. 1.4301, 1.4305, 1.4401, 1.4571 Automatic steels eg. 11SMn30 + C (1.0715), 11SMnPb30 + C (1.0718) Steels eg. St 37-2, C15 Brass / tin bronze eg. CuZn, CuSnZnPb, CuZn39Pb3 (MS58) Aluminum eg. AlMgSi, AlCuMgPb
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    Certifications
    ISO 9001:2015
    The Wiedemann GmbH has specialized in the processing of stainless steel. We manufacture products for the food industry, beverage, fish, and meat industry, as well as for the pharmaceutical and chemical industries. Include the production of drainage technology, doors and windows, sanitary facilities. In addition, we offer expertise in the processing of stainless steel and other industries are available. We offer from individual production to component manufacturing solutions at the highest level.
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    1946
    Certifications
    DIN EN ISO 3834
    The know-how and decades of experience of our employees in sheet metal, Aluminum and steel processing ensure high-quality products and satisfied customers. The work of qualified specialists in the productive and administrative areas as well as high investments in the machine park guarantee the successful completion of the tasks assigned to us. The demands of the market are becoming more and more diverse. We are happy to face this challenge by fulfilling unusual customer requests ourselves fulfill to your satisfaction. BCK Metallverarbeitung GmbH processes sheet metal and stainless steel in thicknesses from 0.5 mm to 20 mm and aluminum sheets up to a thickness of 10 mm on a production area of 5,000 m2. Perfect processing of thin and thick sheet metal using innovative laser technology and CNC-controlled folding technology from the TRUMPF brand guarantee compliance with the highest quality standards. Combined with welding techniques in the field of e-welding, WIG, MIG and MAG, BCK offers itself as your partner for the production of ready-to-install assemblies.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1997
    Certifications
    ISO 9001:2008
    The 360° partner for the technologies of tomorrow. nxtGEN develops, plans and implements complex projects for the high-tech industry, mechanical and plant engineering, and the automotive industry. Global customer care and the delivery of special solutions for the realization of the project are the focus of our actions. Fields of activity: - Conception & Development of production plants - Troubleshooting to optimize the production process (troubleshooting, QM, rejects) - Construction & Drafting - Calculation & Simulation (FEM, CFD) - Prototypes & Small Series - CE Certifications (safety management)
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    Certifications
    ISO 9001:2008
mehr anzeigen