tooliss gmbh is a globally operating technology company specializing in engineered plastic parts and castings. As a highly specialized engineering service provider, the company uses value analyses to develop solutions for their customers that are optimized in terms of technology and cost-effectiveness.

SRFAM is a Portuguese manufacturer of plastic injection molds, founded in 1996, initially providing mold manufacturing services, then with service notoriety and increased work, began to build complete injection molds. We count on a highly qualified team, oriented to the continuous improvement, rigor and fulfillment of objectives that seeks to innovate with the support in adequate technological resources, presenting the best solutions to continuously guarantee the precision, rigor and high quality of the molds that we manufacture. We are specializes in small and medium sized tools (1k and 2k tools), with high complexity and tight tolerances.

We manufacture plastic injection molded products up to a weight v. 800g including hot stamping, pad printing and screen printing - Assembly of components.

We are Slovenian producer of different plastic components. Our core competences are injection technology, painting technology, laser engraving technology, our own toolshop and assembly department.

On 01.01.1983 the starting shot was fired for the production of injection molding tools "Made in Eldagsen". Since that day the name EFK stands for highest precision steel mold and also in the manufacture of plastic articles. In the early years, the design and manufacture of high quality injection molds were the core business of the company. From the beginning, all built forms were supplied against two own spraying machines and optimized to the production stage. This resulted in zero and small series were manufactured in-house. So followed a steady growth of the injection molding and paralell to enlarging the steel mold! Beginning of 1983, we produced on an area of ​​350 square meters; today with 28 injection molding machines and a modern steel mold to a total of 3,200 square meters well. We employ 38 in their field and have qualified staff to this day saved us a high degree of flexibility that our customers appreciate very. Since 1999 the company is certified according to a quality management system. First, according to the QS 9000 standard and since February 2003, the DIN EN ISO TS 16949: 2009 the poster child for the highest possible quality.

Masterpiece Technologies has put together a team that specializes in providing technological manufacturing services, from idea to mass production, with a multidisciplinary approach. Collaboration between our professionally competent departments ensures that our customers meet deadlines in an efficient, cost-effective fashion. With more than 50 years of combined experience of designing and creating unique parts and assemblies for complex projects for a variety of industries such as the Aerospace, Communication, Defense and Medical disciplines, we believe now it is the right time to expand our business abroad and establish a company in the Netherlands to serve the European market. With a singular customer acquisition strategy, our entrepreneurial, experienced and ambitious team has developed an efficient unique outsourcing business model.

Be made ​​of plastic solutions

When thermoplastic plastic injection we are in our element. When it comes to precision, quality, performance and efficiency, we are not looking to compromise but the perfect solution. The art forms of various materials quality to bring them in design and color, we still do not understand as a craft combined with modern technology. The result is the best solution for your individual needs - from separate technical injection molded part, via multi-component parts to manufacturing in the clean room and other special methods such as the gas injection technology.

Complete solutions are a puzzle of many individual tasks

The task of supplying companies has changed more and more over the last few years: we handed down decades ago almost exclusively single injection molded parts, we have grown today into a supplier of components and systems. on the perfect production of injection molded parts, we offer up to the delivery of assembled and tested modules, all the ways to meet the increased demands.

The basis for tailor-made applications

For the production of technically sophisticated injection molded parts, it is necessary in accordance with high quality tools to use. For this, our completely the newly positioned tooling around 1,200 m² optimum possibilities. Highly trained professionals realize that by using the most modern manufacturing equipment. From the data input through tool design, tool from the creation to sampling, we offer everything from a competent source. Assembly and finishing devices are also created in the most precise quality as measuring and testing devices.

Why do we put emphasis on value-added

It is crucial, with whom you are dealing.We help them to fulfill their tasks easier. Whether it is the optimal tool design or the plastic-based design of injection molded parts or assemblies, a conversation with us as your reliable partner always leads to pre-optimal solutions. That is why we place great emphasis on close, trusting and personal collaboration with our customers. You can expect a comprehensive partnership from the first meeting on the common solution to manufacturing and delivery. With measurable results, technically and economically tailored to your requirements. Allows us to offer more - more value for your value

Our company has removed its location in Nabburg / Bavaria, a small town about 40 km from the German-Czech border. Our manufacturing is located only about 70 km away from the parent plant in Nabburg and in Tachov (CZ). We design and manufacture according to ISO TS 16949 to over 100 injection molding machines from 25 to 1000 tonnes with more than 350 employees and products in a multi-component injection molding technology. We process all thermoplastic resins in reinforced and unreinforced version of LDPE to PEEK, TPE and PUR, the biodegradable polymers and Plastic bonded magnet or electrical. conductive materials

Processing engineering plastics Two-component injection molding technology to 250g shot weight Mold size 600 x 600mm Closing forces up to 110t Component injection molding technology to 350g shot weight Mold size 900 x 800 mm Clamping forces from 50 to 200t All-electric injection molding machines Components: Engineering Plastics Shot weight to 250g Closing forces up to 110t Form size to 600 x 600 mm Component spray technology Engineering Plastics Shot weight to 350g Form size to 900 x 800mm Clamping forces from 50 to 200t All-electric injection molding machines Mold construction / construction All forms are designed at home. Form size to 900 x 600 mm Reusable cups Reusable cups in sizes 0.25 L / 0.3 L / 0.5 L very stable design Prices graded according to quantity on request.

Fan art 40 years experience, top quality and a fair price-performance package. With commitment, the necessary know-how and innovative ideas, we specialize in fan such as axial fans, centrifugal fans and flat fan highest quality. The high-performance fans come in broadly diversified fields such as medicine, avionics, industrial and automotive markets each and every day their prowess. They are the enormously high standards exemplary justice of reliability of these areas. ______________________________________________________________________ Enclosures Robust, individually and German at the highest level of engineering. Thus one could describe the case of Bedek enclosure technology. More than 650 modifiable models are available here to choose from. Using the latest technology will be produced at Bedek high-end housing excellence performance. With the Bedek ENGINEERING service, we support you professionally and personally from the idea, through development and construction to finished product in all phases of your project. _______________________________________________________________________ Precision resistors A look into the future. Maximum reliability with maximum resilience make the custom-made precision resistors become the world leader. Application areas such as medical, aerospace and military speak for themselves. Bedek introduces zertfiziertes Precision center and can provide tailor-made film resistors for your needs within 24 hours. TCR of 0.2 ppm / ° C. ESD immunity> 25KV Tolerance: 0.005%

Our strength: Complete solutions from a single source of creative, flexible and dedicated staff. Competent in the following areas:

Development with integrated prototype

Construction

Toolmaking

Punch

Welding

Hardening

Vibratory Finishing

Plastics Technology

Assembly of components

With our 45 process-driven processing machinery (injection molding) with clamping forces up to 4000 KN, about 2,000 high-precision technical plastic parts and rubber and rubber-metal connections are made at the time. Except for PVC, we provide you with all plastics market available. The designs of about 100 customers at home and abroad are construction and materials meet transposed into molds and tools and manufactured by injection molding. Follow-up work such as assembling, printing or conversion can also be performed. An operating data acquisition system (PDA) system with visualisiertem console and a computer-assisted quality control (CAQ system) according to the guidelines of the DIN EN ISO 9001:2000 (quality) as well as raw materials and materials testing equipment ensure the desired high quality standard. The own 3D CAD design and its own tool and mold (3D-CAM) contribute to this continuous quality production. We also have our own lathes and automatic lathes department (6-axis CNC Landrehautomaten) to produce precision turned parts and lathe parts.

Main products:

Technical Functional parts made of plastic (injection) to about 2.000 grams

Encapsulation of inserts, shafts, pulleys and rollers for paper transport

TPU-X processing (crosslinked TPU)

TSG (foam injection molding)

Metal substitution

Compact, insert, and 2-component technology, component manufacturing, printed housing

Rubber-metal compounds (vulcanization)

Tooling

Turned parts and lathe parts

Harald Berfelde GmbH Since more than 100 years, the Harald Berfelde GmbH produces technical plastic parts of all common thermoplastics with single or multi-component injection molding. Our portfolio contains: High-level tooling – from Design to volume production Research + Development Design, Simulation of products Development, prototyping Injection molding production Assembly + logistics Project management, interface to the customer

Plastics molding plastic molding for third parties injection welding vibration and infrared overmoulding construction of plastic molds assembly of plastic polymers.

KWM is a competent partner in the development and manufacture of sophisticated plastic injection molding parts. Special experiences are for thick-walled products before (also foamed in the TSG process) and PUR integral foam moldings. Competitive and dynamic development constantly affect our position. Our goal is to constantly expand the performance. Customer satisfaction and competence are regarded as key success factors. Efficient process control and modern technology combined with the know-how and dedication of our employees, we see as the key factors in achieving our business goals. Our services cover the entire value chain, starting with the development mold, production, completion, storage and shipping. One of our main goals is to offer its customers everything from a single source. Our machine park currently includes 20 injection molding machines from 40-1.000 tons clamping force. The focus is on medium to high weight range (About 10-4300 g piece weight).

From design to prototype and produce line, a comprehensive company Whatever the field of activity of a company, icts leaders from now on Should Have an obligation to do everything to AVOID leakage or dispersions customers possible. Review: The most common strategy is to position Itself on the market as a supplier of "global solutions", a generic term for a wide-range of services and benefits. The engineering office specializes in. technical hand by injection, CREOPP-TEC positions on the market All which can not only Provide the general solution to the original medical equipment manufacturing in the medical industry, the purpose aussi automotive accessories, toys, electronics, defense or cosmetics. Experienced technical experience over the years is to get all the additional knowledge. The company Operates since 1996 for the design and manufacture the Following The tools of all the field (injection / over molded, unscrewing, double injection for parallel and vertical 2K injection molding machine Blow molding gold...). If CREOPP-TEC subsequently assembled on a network of French molders, it aussi offers a low-cost industry with China Directly with our Chinese partner. Do not be dependent on technology goal INSTEAD take the best of each, this is the credo of the engineering office. From the stage of designing hand-TEC CREOPP CONSIDERS the eco-design and Provides referenced materials before the next simulation's phase. The rheological software Cadmould Rapid Could optimize the injection process and control the deformation. Not long after, in the stage of rapid prototyping and adjust the tool, development and industrialization icts on injection machine from 50 to 1000 tons, the company Will show the extent of icts different skills. For Having a final visual effect Quickly, the customers of CREOPP-TEC POSSESS lots of ways: such as stereo-lithography HR (High Resolution), the selected laser sintering (polyamide, Duraform HST gold Duraform Flex A6 steel or aluminum) or odd CNC rapid prototype, Vacuum Casting and RIM (Reaction Injection Molding - Process shaping thermosetting plastics).Finally, working on the industrialization stage encompasses all stages, it includes the assembly, painting, packaging, various checks and tests.

Since1976, we have been designing and building moulds for moulding plastic materials and we have been dealing with injection moulding and metal replacement. We have a moulding department with 10 injection moulding machines with a range from 60 to 380 tons of clamping force, equipped with Kluin Wijhe B.V. injection units, one of the leading company in this field, and Maxi Melt plasticizing screw profiles, specific for families of engeneering plastics. Our long expertise and continuous updating on the innovation of polymers, their characteristics and possible applications, on the design methods, moulding and mould construction, allow us to analyse projects and propose solutions to customers in a wide range of sectors

We see ourselves as a partner for plastic injection molded parts of the highest quality with its own mold. One of our strengths is to advise our clients during the design phase. Great experience, we have the encapsulation of metal parts. Because of our size we are very flexible.

High-precision devices, milled parts, small batches and injection-molded parts — these are our areas of expertise; we produce these products at our plant in Jennersdorf with the greatest care, to the highest quality and with irrepressible commitment for our customers from a wide range of industries. Accurate, timely, flexible and at attractive prices.

Established in 1995, AMET Ltd. mission is to develop modern production in the field of medical equipment and electronics. The top management and employees’ common efforts succeed in making it respected and reliable partner on the German market. Fulfilling its own high criteria and international markets requirements, AMET Ltd. introduced the quality management system ISO 9001:2000 in the manufacture and accompanying processes in 2001. The company investment policy implies providing modern production facilities as well as opening new sustainable jobs with the contemporary social benefits. In order to provide better control over the various processes, as well as continuous quality improvements, there are departments with their own style in the company, depending on the goals and tasks set for each of them. Research and Development Department Inventors, idea generators, always thinking ahead to be the first among the leaders Electronics Department Each good idea and R&D Department product has to turn into an end-product: stable and reliable Mechanics Department People and machinery power turn the raw steel into mechanical elements, ready for implanting Sales Department In order to be appreciated, each product has to reach the people it is designed for. The Quality Council coordinates the different structures, controlled by the top management.

Goletz, the full-service provider for plastic components and assemblies. As a medium-sized family business, Goletz GmbH has been the competent partner for the production, processing and finishing of plastic parts for industry for over 50 years. This is about more than injection molding. Comprehensive advice from the first product sketch to the finished product is the basis for innovative and qualitative solutions. For us as a team, competence in plastics means practical experience and a wide range of manufacturing and processing methods such as multi-component manufacturing, surface treatment or the assembly of complete assemblies.

Feinstanzteile

<

YKK is without a doubt the worlds leading designer, developer, manufacturer and supplier of quality fastening products, especially zipper. But the name of YKK stands not only for zipper. We offer you excellent technical and fashionable fastening systems from metal, plastic, hook and loop fasteners, textile and plastic products (webbing, cords, cord ends, cord stopper, buckle, plastic injection). YKK has grown phenomenally since our beginnings in 1934, and can now be found operating with over than 39.000 employees in over 70 countries around the world. Our vertically integrated system ensures that, wherever possible, we are involved throughout the entire manufacturing process from raw materials to finished products. In addition, we design our own machinery which allows us to control every stage of the manufacturing process.YKK also has a responsibility to stay one step ahead of an industry driven by trends and styles. We think carefully about our customers needs and challenges and react quickly and efficiently. We also partner with our customers, continuously inventing new fastening products with unmatched precision to meet their individual needs. YKK offers a range of performance plastic components which are designed to suit a diverse range of applications and industries. The YKK seal of quality is extended to all products within this range. Technical attention is paid to every item from initial concept, right through to the finished end product. Our innovative design, coupled with optimum performance, ensures that YKK ultimately offers the best fastening solutions for any individual or industry. Standard Plastic Items Plastic standard program offers suitable products for every application. All Products are available in different measurements, materials and colours. The wide range of products includes: adjusters, suspenders, buckles, hooks, holders, rings, cord stoppers, cord ends, shoulder pads, zipper-push-ons, camping parts, injected items. YKK Die-Cast Products YKK manufactures high-class injection-moulded technical plastic products for various industrial and retail applications. Based on our comprehensive machinery outfit we are proficient in any current injection moulding technology. There are no upper or lower limits regarding tool size or the size of the die-cast parts.The YKK products are available in almost every thermoplastic material and in more than 30 standard colors as well as in transparent and colored-transparent styles.

High precision turned and milled parts made of brass, aluminum and steel machines in small and medium series and function-tested assemblies - this is the world of Burger & basement. A motivated and experienced team of 25 professionals ensures that individual customer needs are met exactly. 100 percent. Craftsmanship and experience are not enough to this, it requires special specialty burgers & Keller: a love of precision. From the first client meeting to punctual delivery.

Micro injection molding services. Design, tooling, molding - all in one place.