We are a business group dedicated to the development and manufacture of plastic components and subassemblies for automotive and household appliances. Competitiveness and innovation are our main strategic lines, which allows us to ensure the best service to our customers. Our company is part of Mondragon Corporation, a cooperative group with a global presence that is innovative and committed to intercooperation. We are a business group dedicated to the development and manufacture of plastic components and subassemblies for automotive and household appliances. Our main strategic lines are: * Production plants with a unique identity. Priority to customer service. * Speed in the development of projects. Key competitiveness factor. We are able to develop projects in any of our production plants. * Innovation. It is already a way of communicating with our customers. * A reliable supplier. Our customers trust us. * The people of Tajo Group. They participate in the management of the company and assume market challenges with sufficient motivation to achieve economic and social successes. AUTOMOTIVE SECTOR We are a global provider of solutions including design, assembly and control of complex systems based on different plastic injection technologies for the Automotive sector. We offer a wide variety of components and functional and decorative subassemblies, our main product groups being: instrument panels, interior linings, and functional assemblies. We always aim to be a leading supplier in development, quality and service for our customers in the above product groups. WHITE GOODS Our broad experience accredits us as specialists in the design and delivery of custom-made solutions and components based on different plastic technologies for domestic appliances for washing and refrigeration. We offer a wide variety of components and functional and decorative sub-assemblies. TECHNOLOGIES plastic injection solutions design for white goods PLASTIC INJECTION Conventional, gas, bi-material, IMD and over-molded. White goods welding WELDING Ultrasound, vibration, hot plate and laser. decorative sub-assemblies for White goods AESTHETIC FINISHES Painting, pad printing, heat etching and chrome plating. components and functional and decorative sub-assemblies for White goods ASSEMBLY CELLS AND CONTROL SYSTEMS Custom-made solutions OUR PLANTS Tajo Group has relevant customers across the world, and its size and flexibility allow it to establish a direct relationship with customers. Tajo Group has consolidated its presence in Europe, where it has four production plants located in Spain, Poland and Czech Republic as well as in China through a purchasing office. QUALITY · CERTIFICATIONS Our commitment to the quality of our products and processes is firm. That is why we have developed an Integrated Management System based on quality, prevention and respect for the environment. ISO 9001 · TAJO ISO 9001 · TREBOPLAST ISO 9001 · TABIPLAST ISO 14001 · TAJO ISO 14001· TABIPLAST IATF-16949 · TAJO IATF-16949 · TABIPLAST IATF-16949 · TREBOPLAST ISO 45001 · TAJO OSHAS ISO 45001 · TABIPLAST

Challenges grow with the idea. As Pohl & Sons was founded in 1913, they concentrated more fully on the button production. Even though we are now the market leader in the manufacture of buttons, to have our Workspaces long since expanded. Based on the know-how of an existing for over 90 years, family-owned company, we have created a flexible and economical production of plastic injection molding and zinc die castings in the last decades. Our strength is the mass production of high precision technical parts made of plastic or die-cast zinc for all industries. Alone in the plastic injection molding weekly capacity is 4 million pieces, of course we also manufacture small series like for you. Complete solutions from one source: Fast, efficient, cost-effective. From consulting to production to quality assurance: We hold ourselves to the requirements of our customers.The production of plastic injection molding and zinc die castings assumes perfect mold. Therefore, all forms are produced in our own tool on CNC machines with the highest quality. Experience makes perfect - even in the further processing We not only have the necessary know-how for the production of high precision plastic injection molding and zinc die castings, but also set new standards in the further processing. But in our company are high quality, modern and extremely powerful post-processing such as laser machines, pad printing machines, paint spray booths and paint baths. Also, we have decades of experience in the electroplating of plastic and zinc die castings. From the idea to the finished component Already in the early planning stage of your project, we see ourselves as a competent partner in the performance optimization and implementation of customer-side targets.We will carefully examine the conditions for the optimal preparation of your tool and advise you in choosing the best material for your application. 30 plastic injection molding machines - Arburg to 250 tons clamping force - Shot weight to 650 gr - Max. Clamping area 570 x 570 mm - CNC controlled. The following are available: - Color printing or screen printing - Laser processing - Color painting - Dyeing - Electroplating - Installation work of all kinds, and even small lots.

Since 1986, IPV injection has specialized in the development and production of plastic injection parts For over 35 years, we have acquired recognized expertise in many sectors of activity: automotive, construction, packaging, furniture, food, electricity, plastronic, cosmetic, microbiology IPV injection is part of a family holding company, and has remained a reactive sized company

Liegau-Augustusbad is located in the vicinity of Dresden/Saxony, with perfect logistical connections to the motorway and Dresden airport. The Company’s manufacturing area is around 26,000 square metres and has been producing a wide range of moulded rubber components since the early 1900s. As a result, we have gained extensive knowledge in the field of rubber processing and parts manufacturing. Due to the fall of the DDR, the Company was later privatised in 1991, with large investments made in a more modern manufacturing process and extension of the machine park. The KET has currently around 50 highly skilled and motivated employees, enabling us to work a 3 shift system in order to fulfil our customer’s needs, whether it’s a Simple form or a complicated Moulding, we aim to please. Through our quality management system DIN EN ISO 9001 and DIN ISO 13485 certification. We are able to guarantee a very high level of customer satisfaction and quality of our products. Our technology department control and monitor the preparation, introduction and implementation of our production processes according to clearly defined specifications. The most important operating procedures we use within our production processes are: • 3-D-printing/Plotting • compression moulding process (CM) • transfer moulding process (TM) • injection moulding process (IM) • injection transfer moulding process (ITM) The vulcanisation operating processes are carried out in semi and/or fully automatic machining cycles. We also offer a number of procedures and technologies for the post-treatment of produced products (finishing): • thermal post-treatment (Curing) • mechanical post-treatment (low-temperature deburring) • manual post-treatment (hand deburring / assembly) • covering and coating processes We manufacture parts from rubber compounds such as EPDM, NBR, SBR, CR, ACM, NR, FPM, IIR, MVQ and LSR (silicones). All of which have received clearance from the automotive industry, as well as KTW and DVGE clearance for the food and pharmaceutical industries. In addition to rubber vulcanisation, we also manufacture a large quantity of thermoplastic elastomers (TPE). Another key feature of the materials sector is the use and manufacture of recycled rubber granulates from various basic elastomers The equipment and control systems of our Machine Park reflect the current state of the art in engineering, thus Enabling us to meet the future requirements of production engineering. We can manufacture parts from less than 1 Gramm up to 4,5 Kilograms.

The Julamp GmbH is an innovative company that make reliable and dynamic with modern and flexible corporate structures and highly automated production equipment which the backbone of our efficient production. Our strengths lie in the field of development and production of Kunststoffspritzgiessteilen. (Including rework or Module assembly). For them, we produce series parts in standard plastics (PS, PE, PP, PET, PVC, ...) or in engineering plastics (ABS, PMMA, POM, PC, PVDF, ...) for the electrical, construction, cosmetics and the food industry .... Our goal is to build relationships and maintain in a partnership relationship.

We see ourselves as a full-service supplier with a focus on customer-specific operating units and offer the production of electromechanical assemblies and the procurement of all necessary components. We support our customers in the realization of their products and produce them economically and in the highest quality. Individual silicone rubber keypads ? A plastic housing for your electronic device ? A spring-contact magnetic connector with cable assembly or a complete handset ? We can do it all. We see ourselves as a link between production plants in Asia and our customers in Europe. Our strengths lie in the technical advice and support of our customers projects and in a professional procurement, quality assurance and logistics. Our customers benefit from a variety of services such as: - Technical support from the first idea to series delivery - Optimization of technical specifications for product safety - Development of cost reduction options - Support in development & design tasks - Technical tests and analyzes in the N & H laboratory Through highly qualified German and Chinese engineers in our company, we communicate excellently with our customers and supplier, even about complex technical issues. On customer demand, we also can take over entire development and design tasks. A creative and dynamic way of working, as well as tolerance and honesty characterize our cooperation. All products are manufactured by our long-standing supplier network in Asia. All production plants are certified according to ISO 9001, ISO 14001, TS 16949 and ISO 13845. Manufacturing according to European quality standards at economical prices is our constant endeavour. With the aim of being an attractive long term business partner, we are constantly expanding our portfolio with new products and technologies. Our customers include well-known German and international companies in the automotive industry, medical technology, telecommunications, industrial automation, building control technology and other industries.

Since 1945, the name Kappich - as a family business in its third generation - for individual products of the highest quality. Are manufactured injection molded plastic parts from all thermoplastics and plasticized PVC, which the electronics and find eg in medical technology, the automotive industry. Modern injection molding machines produce in a clamping force range 15-200 t Plastic parts of 0,5 g - 360 g This robotic systems for optimal production processes and consistently high quality care. Additional services include metal inserts, heat embedding of M3 and M4 threaded bushes, printing of plastic parts in the pad printing process. In mold less extensive tasks can be implemented in a timely manner internally. For more complex issues we draw on proven partnerships in order to obtain best results and rational solutions.

Additive manufacturing with fibreprint: From design to construction to implementation! Regardless of whether you need a functional prototype, a small or medium series at short notice - we will implement your project holistically together with you. Benefit from our high-quality, resistant materials. From tooling to manufacturing - our cost-efficient and diverse 3D printing processes for your production parts are characterized by their precision and surface quality. Services: construction + Creation of 3D printing data + Data check of your print data + Optimization of 3D printing data production + Rapid prototyping + Rapid tooling + Rapid manufacturing installation + Individual parts to assemblies + Finished components + Pre assembly / assembly Let's tackle your project together! Send us your ideas, data and requirements. Choose material and quality.We will make you a non-binding offer and get back to you within a few working days. Material overview: Materials for every application Thanks to the large number of our 3D printing processes, we offer materials for every area of application. Our materials convince with very good technical properties and perfect surface quality. Find out more about the four material groups and their possible uses. In the case of high mechanical component loads, we recommend the integration of continuous fibers such as carbon or kevlar. We are happy to support you in choosing the right material and advise you on the most suitable printing process.

The operation of Antares is a family owned and was founded in 2008. The professionals of this plant have ten years of professional experience in the production of experimental tools for stamping and forming. This professional experience was acquired in Germany. Production is CNC - machine equipped as the construction with CAD / CAM. Today we focused on the production of single and serial parts in the automotive industry and mechanical engineering. Through our experience and dedication, we guarantee good work, quality and reliability

As an efficient partner for your success, HEWI offers broad-based expertise along the whole route to your product, from the initial development through to series production. Your vision: From the design to the series product • Starting with a model or a drawing • Transfer into our 3D system – Siemens NX / CATIA • Design of the product as an economic injection moulding • Rapid prototyping • Material selection and testing, strength calculations • Working through requirements specifications – preparation of performance specifications • Design FMEA Your requirements: Comprehensive project planning • Definition of all specific characteristics, requirements and quality objectives • Preparation of a production plan: Logistics from raw material through to delivery • Advance quality planning, process FMEA, test & inspection planning • Definition of all resources, supplies and auxiliaries required • Purchasing, installation, enabling, training, process validation • Comprehensive project management: Customer requirements, scheduled dates/deadlines, costs Injection moulds • Fill analysis with Mold Flow: analysis of weld lines and stresses • Selection of the ideal mould concept • Thermal analysis of the product: distortion and dimensional stability • Mould design in 2D and 3D • Definition of the required process monitoring: sensors and scanning systems such as HB-Therm Flow or Kistler pressure sensors • Mould production in Germany or with worldwide partners • In-house mouldmaking From the preliminary sample through to series production • Product support from the first-off tool parts until handover to series production: tests, samples, changes, assembly trials, automation • Verification of process capability • Comprehensive testing options due to in-house laboratory and measurement & test room • Revision of the process FMEA: Feedback to the design phase • Clearing and start of series production: Presentation of the initial samples with test reports Company facts & figures • More than 70 injection moulding machines: 22 to up to 1600 to (DEMAG, Ferromatik, Arburg, Engel, Krauss-Maffei) • 550 employees • Our own brand products and manufacturing of different engineering plastic products • Automation: articulated robots, linear equipment, dying equipment, driers, assembly lines and assembly machines • Production methods: standard injection moulding, 2 and 3-component technique, mono sandwich, gas injection technique, moulding in inserts made of steel, plastic or electronic parts, in-mould decoration of films using the „SKIN LINE“ process • Production of high-quality surfaces: painting/enamelling, electroplating and coating with partner companies • Assembly of subassemblies, welding of plastic products, printing and assembling through to the finished sales packaging • Delivery to the customer: Use of different container systems and worldwide delivery Certified quality • Certified by EN ISO 9001:2015 • Environmental management by EN ISO 14001:2015 • Medical devices by EN ISO 13485:2016 • Energy management by EN ISO 50001:2011 HEWI Heinrich Wilke GmbH Bereich Kunststofftechnik Hagenstr. 2 | 34442 Bad Arolsen-Mengeringhausen | Tel.: +49 5691 82-735 | Fax: +49 5691 82-712 | info@hewi.de | www.hewi.com

zwerenz industries characterized by high quality standards that are realized by the coincidence of experience and development. All parts are manufactured in Germany. Motivated employees and flexibility and allow a high level of customer service a reality. The use of modern communication technology enables our officers a constant flow of information on project and production levels. Die-cast zinc / zinc die casting The hot chamber die casting machines, used zinc die casting ensure reliable production with consistently high quality. You can reach clamping forces from 75 kN to 700 KN for castings with a gravity of 0.05 up to 1,000 g. As a standard alloy we process ZL0410, also called ZnAl4Cu1 or Zamak5. We can, however, other Zinkdruckgußlegierungen such as ZL0400 ZL0430 or are possible. Thanks to optimized production processes also extremely thin-walled castings with excellent properties can be produced.To realize topics such as material and weight savings for the customer is the in-house mold design available incl. This can already be in the ground floor each font, so pass on the railways in the tool so that a fault-free production and an optimal result is achieved. Plastic injection molding Plastic parts made on modern machines - this makes it possible to process highly sensitive plastics efficiently. Our machinery consists of injection molding machines with clamping forces from 25 to 100to. Due to the largely automated production creates the basis for a flexible, cost-effective and environmentally friendly mass production. Through the in-house mold with design department can already be in the planning and development of the railways invest so that an optimum Ergebis is obtained by an error-free production. Additional Manufacturing Technologies • Veredelungs-/Kennzeichnungsverfahren like: pad printing or laser marking • Installation and commisioning of assemblies • encapsulation of metal parts with plastics Materials used: All common thermoplastics suchExample: ABS, PA, PA6.0, PA6.6, PC, PE, PMMA, POM, PP, PPN, PS, etc. The materials may be colored by the master batch pigments. Toolmaking In the field of tool we offer our customers a comprehensive portfolio of services. We distinguish ourselves above all by our high standard of quality. This is made possible by precision in all operations. The implementation of individual customer requirements, flexible order handling and a high level of customer service are basic requirements that we can provide. Laser Technology / Laser inscription The modern way of laser marking enables the processing of almost all materials. Many of our machines working in CO ² methods by which incorporate by laser beam headings, or similar motives in the works. With this method it is also possible to cut from materials desired contours. Another lettering style is achieved with YAG lasers.This technique allows the marking / engraving of almost all types of metal. The third area is the lettering in the color change process dar. Here materials are used which change by the addition of specific components by marking with laser technology at the appropriate place their color. In zwerenz industries is in this future-oriented field of work by one of the leading companies in Europe. Conceived at the highest technical level of machines and the technical personnel employed enable the implementat...

Gronbach has been developing and producing components and complex assemblies on a production area of over 20,000 m2 with 290 employees since 1964 and has also specialised in the processing of stainless steel and aluminium, surface finishing and plastic injection moulding. In addition, a separate department is dedicated to the development of new surface technologies, manufacturing and assembly processes. The core competencies of the Wasserburg site are in the following areas: Metal processing (bending, milling, deep drawing, drilling etc.) Surfaces (anodising, powder coating, printing, laser engraving) Plastics technology (hybrid, back-moulding) hybrids instrument engineering development work PRODUCTION TECHNOLOGIES AND PROCESSES In the area of production technologies, we have specialized primarily in the surface refinement of stainless steel and aluminum, the production of functional and visible components as well as plastic injection molding and adhesive technology. These technologies form the basis of our equipment technology, but are also offered by us as individual services. We are constantly expanding and renewing our portfolio with new combinations of technologies and materials, e.g. in the art of back-moulding metals such as aluminium and stainless steel with different plastics, in order to be able to offer our customers high-quality and cost-optimised manufacturing processes.

For thirty years, the name is Pliessnig for creative product development and solutions in the field of thermoplastics. Experience, a high-tech equipment and one hundred percent quality of produce. Intensive development work and functional reacting ideas are our strengths. Small but very specific products, we export 50 percent of our high-quality goods. Customers include global corporations in Asia, the US and Europe.

EIKOS srl is a manufacturer of technical plastic parts and specializes in injection molding, overmolding and 3D printing. In general, we process all common technopolymers that are available on the market: PS - ABS - PP - PE HD - PET - PA 6 - 66 - 68 - POM - PC - PBT - PVDF - PPS - PU -Teflon. The company was founded in 1995 and is based in Turate, a suburb of Milan. Turate is a strategic location due to its proximity to the Swiss border and all Milanese airports. Together with our customers, we develop components for a wide variety of applications and requirements: electrical industry, machine and plant construction, chemical industry. https://www.youtube.com/watch?v=jR1EVlDcHCw

BC ITALIANA is a company with over 50 years of experience in both product engineering and plastic injection moulding of complex components. Currently the moulding department (4,800 square meters out of a total of 6,100 available) consists of 30 machines with 50 to 1,000 tons clamping force: this great difference of tonnage allows the moulding of micro components up to large or medium-sized parts. Furthermore, some plastic parts are produced by nitrogen moulding technique. This process can avoid functional, structural and aesthetic problems that sometimes arise with traditional moulding methods. BC ITALIANA manufactures, according to the highest quality standards, a wide range of products belonging to many industries: from automotive to rail, from medical to musical instruments. The main competitive advantages of BC ITALIANA are the long-time experience in engineering and moulding of complex plastic components, both from technical and aesthetic point of view. So, when it comes to dealing with customised and complex plastic parts BC ITALIANA performs at its best. Co-design, problem solving and extremely cared injection moulding are BC ITALIANA special services for all its clients.

Werner Breitschädel GmbH has been active in the field of machine and tool construction since 1950. For our satisfied customers we manufacture precise tools and mechanical engineering and plastic parts. To carry out our orders, we have a team of highly qualified employees who are always up to date with the latest technology thanks to regular further training.

KOMOS GmbH: Your product idea becomes success. KOMOS is an industrial service provider with the highest standards of product and service quality. For more than three decades, the company has been manufacturing high-quality products made of metal, plastic and composite materials, also in combination with electronics and electrical engineering, on behalf of customers with a competent team and modern machinery. With its hybrid technology network of stamping, turning, forming and injection moulding, in-house research & development, assembly and packaging and many other services, KOMOS can realise almost any product vision at the highest level. Innovative with a system - for more than 30 years: At KOMOS, a 2nd generation family business in Bürgel, 75 employees develop and manufacture high-quality products for the medical technology, automotive, electronics, aerospace, construction and mechanical engineering sectors. The claim is always a long-term trusting partnership with the customers - for successful products, guaranteed 100 % Made in Germany. https://www.komos.de/unternehmen/ Production technology follows function. Punching and forming, plastic injection moulding and CNC turning, processing of plastic, metal and composite materials: KOMOS offers an extraordinary manufacturing breadth and depth under one roof in its unique hybrid technology network - together with its own R&D department, assembly, packaging, logistics and much more. In this way, it is not the technical possibilities but only your requirements for your new product that decide on the manufacturing. Learn more about our manufacturing technologies! https://www.komos.de/fertigungstechnologien/ KOMOS product strategy. Success for you. At KOMOS, we are open to your ideas and visions - and always ready to transform them into market-ready products with full commitment. This is done using a consistently applied methodology: from understanding your product idea as part of a non-binding initial consultation, through technical anamnesis, rough concept with proposed solutions and fine-tuning, to precise production and further processing. https://www.komos.de/produktstrategien/

"From concept to mass production .... everything from one source." Our goal is to offer our customers an all-round carefree package. That said, you bring the customer the idea, and thus the ball rolling. Everything else, from development tool manufacturing to mass production comes from our side. As we know from our own experience here, how difficult is the path from idea to finished product, we want to help you this way considerably. Save for example, the way the designer as a toolmaker or from there to the production site. Is available in the rule A contact person is available, which reduces the times of development drastically.

Welcome to HamProTech Speed, reliability and quality are the three characteristics that we claim for ourselves take and make available to our customers. Our manufacturing portfolio includes injection-molded parts for prototypes, pilot and small series as well as functional models. We produce exclusively on Demag injection molding machine parts from 1 to 300 g, with or without inserts. We manufacture for the medical and aeronautical engineering, the automotive sector, building services, electrical and Safety technology and support engineers or project teams in the realization and manufacture of sophisticated initial samples. We see our strength in our long-term Experience and our results-oriented project implementation. We guarantee fast and reliable solutions to ensure a high quality of your products. HamProTech offers the injection molding production also own tool. There only injection molding tools are manufactured for over 30 years. In this combination, we are able to guarantee the fastest possible processing times and your products - finished on schedule and cost - from the prototype to series production. We look forward to you and your challenges! Translation by Google Translate

Netmade is a dynamic Business Network of 5 Italian SMEs from the industrial district of Reggio Emilia (Italy), that decided to join together, share values, skills, expertise and enter the market as single entity, in order to offer a 360° view on the Rubber & Plastics world. Netmade has set as its goal to follow Customers' projects providing them a complete service as sole supplier in many different fields: R&D, product engineering, mould construction, plastic injection moulding, thermoforming, blow moulding, rubber processing, post-production workings and finishings. We are offering: 61 Injection moulding machines, from 8 to 650 tons, for the following technologies: - Injection moulding (60) - Injection moulding around inserts (61) - Doubleshot moulding (1) - Transfer moulding (1) - Micro injection moulding (1) 6 Blow moulding machines, from 40 to 120 tons, for the following technologies: - Extrusion blow moulding 34 Compression machines, from 5 to 300 tons, for the following technologies: - Compression moulding 2 Injection compression moulding machines, 100 tons, for the following technologies: - Injection compression moulding 24 Rubber injection moulding machines, from 60 to 300 tons, for the following technologies: - Rubber injection moulding 8 Thermoforming machines, from 800*1200mm to 2500*3500mm, for the following technologies: - Thermoforming 1 3D Printer, for the following technologies: - 3D Printing 4 Ultrasonic welding machines 4 Lathes 6 CNCs 5 Sinking EDMs 1 Wire EDM 6 CNC milling machines 1 EPS foaming machine 7 CNC cutting robots 1 Cutting machine 1 Hot bending machine 2 Hot plate presses

Roth plastic + form GmbH has been active in the field of injection molding technology for more than 50 years. At our locations in Balingen (Germany) and Veröce (Hungary) we produce sophisticated injection molded parts for the automotive, appliance and electrical industries with a total of 80 employees.

Welcome to Haller GmbH, tool making and plastics processing. For over 50 years we provide technically advanced injection tools and plastic parts for various branches of industry. We are an independent and independent family with currently 70 employees. It is very important for us the personal, customer-oriented consulting. The basis for dialogue with our (your) customers is our employee team with extensive experience and expertise in the individual technical areas of the company - development / Kons- truktion, tooling, plastics processing (less than 1 gram to 800 grams of excess weight), printing and assembly. We also offer logistics solutions as kanban, JUST IN TIME or consignment stores at. Moreover, we also accept contract injection jobs Working together with you, we want your concepts partnership schedule and innovatively implement.

Manufacture of plastics and deep-drawn parts according to customer drawings and the associated tools We are happy to take care of: development / design, printing, painting, chrome plating, plating, assembly, component manufacturing, logistics

We are a plastic injection molding company near Aachen with around 120 employees and generate almost € 20 million in sales. We produce technical plastic components for various industries, with the exception of the automotive industry. We also offer automated assembly of assemblies. Our partly international customers include Scheidt & Bachmann (https://www.scheidt-bachmann.de/de/), Saurer Schlafhorst (https://saurer.com/de), or Linak linear drives (https: / /www.linak.com/) from Denmark and Sebo vacuum cleaners (https://www.sebo.de/). We are ISO 9001: 2015 certified and UL certified for the US market. Our machine park currently includes 38 injection molding machines with clamping forces from 25 to 650 tons, 2K technology and gas pressure. We process all materials up to PEEK and produce components with a weight of up to approx.1.5 kg.

HERA - SOLUTIONS IN METAL Bent wire parts, stamped bent parts, cold extruded parts

We are a developer and supplier of injection molded parts, injection molds, mold repairs and contract manufacture of plastic parts. Our customers value us as a reliable and innovative system supplier. Our competencies: Development of plastic parts, design, production, sales, project management, process development, tool and mold making, quality, service and logistics. Our small company structure, the high personal goals, is the ideal basis for our services. We are a full-service supplier with good and flexible logistics.

The Maplastic GmbH is not only a manufacturer of its own products as well as a high quality job shop for your serial production, but also as a competent system provider that accompanied your product from development to production stage. Most demanding quality standards are guaranteed. By trained staff, high flexibility, expertise and speed we are able to implement your customer-oriented requirements. Our 40 years of experience in plastic injection molding is available.