Injection Moulding

Tooling

Metal and Plastic working

CNC-Working

Assembly technique

We develop, produce and sell permanent magnets for industrial series needs. Furthermore, we develop and manufacture customer-specific assemblies (magnet systems). Our product range includes:  sintered hard ferrite magnets  sintered samarium-cobalt magnets  sintered neodymium-iron-boron magnets  plastic-bonded hard ferrite magnets  plastic-bonded samarium-cobalt magnets  plastic-bonded neodymium-iron-boron magnets �� Plastic and plastic composite parts  customer-specific assemblies (system solutions)  elastomer-bonded magnets

Since 1942, when Gummi-Jäger, the parent company of Jäger Gummi und Kunststoff GmbH, was founded, application-oriented advisory service, material-oriented construction and system related development are the key for the Jäger Group’s success. Our competence and efficiency continuously raised according to the customers’ demands. Our success is based on continuous product innovation, advice independent from the material as well as a friendly, competent service and zero-defect philosophy. The family business in its third generation operates worldwide and is a qualified partner in the field of machine and plant engineering, agricultural industry, environmental and as well as in oil exploration. Over 800 employees are working towards this goal in more than 20 sites in Europe, the USA and China.

We can produce injection molded parts from 2g to 750g including mold construction - from small to medium-sized plastic parts - uncomplicated & inexpensive, inquiries are worthwhile - Made in Germany - sustainable production with green electricity and photovoltaics - We process all common thermoplastics and recycling plastics - Small series 500pcs. up to large series 50,000 pieces. We do the necessary mold construction through experienced partners, the customer can choose whether the mold should be made in Germany or China. Machines with a clamping force of 55 to 250 tons, finely graduated for economical and economical operation.

Röchling Medical Waldachtal AG is a plastics processing, innovative company within the Röchling Group that manufactures sophisticated parts, components, and entire assemblies for a wide range of applications (industrial and medical technology) with a broad portfolio of manufacturing and assembly expertise (injection molding, extrusion, machining, assembly). As a solution provider, Röchling Medical Waldachtal AG offers a wide range of services. From product development, risk management and validation to approval, our specialists offer solutions tailored to the customer's needs at the highest quality level, from the idea to the finished product.

We are a plastic processing company (injection molding) with 14 machines from 20 to. to 275 tons. Clamping force, injection weight to 450 gr with its own tool.

We offer:

Plastics Processing Product design, development, support and advice from the idea to the finished product.

Assistance in material selection

Design and manufacture of injection molds

Manufacture of plastic injection molded parts up to 300 grams weight

Assembly

Pre-series (SLA, SLS, vacuum casting) and finishing with external partners

We offer beyond that:

Refinement of injection molded parts, special surface treatment (painting, printing, embossing, etc.). By external partners

Assembly of components (including orbital riveting) to reduce your production depth

High-performance tools and motivated, well-trained staff provide a high level of quality.

We see ourselves as all-round service provider in the field of plastics technology. From consulting to prototyping, mold and tooling to manufacturing assembly and dropship we offer our clients comprehensive solutions and services from one source. Our particular strength lies in the quality and performance characteristics of our production. In addition to our top technical equipment we use only the best-prepared materials. Our specialty is the high gentle drying of various plastics. The relevant specialized and trained staff are employed at the place in the company. The motivation of our team is the long-term guarantee that our injection molded parts arrive on time and in the required quality at the customer. Especially in small quantities, flexibility and speed is our strength.

WIR electronic, a manufacturer with more than 25 years of market experience, offers the following services: - manufacturing from individual customized single cables up to complex wire harnesses, 100% made in Germany - each product ist tested, with 5 year-warranty - consulting, design, engineering and production; everything from one source - 100% delivery reliability, with short communication channels to our customers - from batch size 1 up to 10.000 pieces, from prototyping to mass production - overmoulding (e.g. RJ45 straight/ angled; M12 connectors: A-, B-, D- and X-coded) - product range: data cables | single wires | ribbon cables | cable harnesses | coaxial cables | fibre optics | power cords | drag chains | control cables | bus cables (CAN, EtherCAT, PROFIBUS, PROFINET) | mounting/cabling of panels up to distribution boards | and many more - cables with extended or unusual length (e.g. VGA cables up to 50m, KVM cables up to 80m) - Production of cleaned cables (optical industries, medical technology, aerospace technology, micromechanics)

Magnetic Media Mechanics Ltd. was founded on the 9th of October 2000, as an independent company on the territory of former big factory “Magnetic Media” Co." It is situated near the motorway, in Dragor, municipality of Pazardzhik. The company is 108 km away from Sofia and 35 km away from Plovdiv. MM Mechanics Ltd. is situated on 8 000 square meters all-out area and has its own buildings, machines and equipment. The company is specialized in mechanical processing of aluminum and steel parts, production of varied tools for flooring, all kinds of galvanic coatings and powder coatings. MM Mechanics Ltd. also produces different kinds of assemblies, as well as non-standard machines for varied processing and current repairs. MM Group - Production of tooling – press forms, molding forms , punching tools, tools for forging - Aluminum die casting under pressure – with machines from 200t to 650 t. - Alloying of aluminum and zinc alloys - All Types of machining - Galvanic coatings – bright and chemical, manganese and zinc coating, chromium plating, - Molding of plastic parts - All types of heat treatment, cementation - Powder and liquid spray coating - Manufacturing of joint bolts, tips and rods for cars - Production of tools for floor covering - Assembling line of meetings and products - Milling and turning (CNC machines) - Stamping, Deep drawing, Forging - Grinding, Heat Treatment, Welding

The company Wilhelm Kimmel GmbH & Co.KG, Plastics was founded in 1952 in Sebnitz and is a company with decades of tradition in the plastics processing and preparation. Our qualified and motivated employees, our modernization investments and our quality assurance according to DIN EN ISO 9001 are a high level of guarantee for optimal satisfaction of customer requirements. Acrylic glass deformation: - Manufacturer of bath and shower trays made of acrylic glass in all standard bathroom colors - Production of Maßeinsatzwannen for the rehabilitation of Altwannen - Supplier of shower enclosures, bathroom furniture and whirlpool and airpool Injection: - Supplier of technical parts for equipment manufacturers - Supplier of moldings for home, garden, sports and construction or for attachment of electrical cables - Develop and manufacture new plastic moldings according to drawings or samples Extrusion: - Compounding of thermoplastics (except PVC), especially PA 6 and PA 6.6 - Grinding of PA fibers, unmodified or modified with property changing additives, such as fiberglass, glass beads, or mineral fillers in the colors black, white, natural and gray.

Producing high innovative injection molds such as multi-component injection molding, Variotherm technology, made hollow body molding. Tools with conformal cooling in laser cusing technique. Family in 3rd generation.

Production of technical rubber products Our strengths:

rapid quotation

flexible order processing

short delivery time

We see ourselves as a partner to our customers:

Joint development of articles of rubber

Advice on the design

Selection of the appropriate rubber quality

Selection of that manufacturing process, which promises to be an optimal ratio between the tool investment and unit price

Founded in 926 in Kassel, Hesse and anchored in East Westphalia since 1945 Since 2000 with 2 plants in Poland and since 2006 with one plant in Turkey, Coko employs a total of approx. 1,300 people with a growing trend.

As a medium-sized company, we produce plastic parts mainly for the electrical and automotive industries, as well as medical technology. The EHS Plastics Processing GmbH is partner of major companies in these sectors. The main focus is on tooling and processing of thermoplastics. We have all the technical facilities to manage your projects holistically can. Customer orientation is always at the forefront and has contributed to the success of the company. - Tool With the acquisition of competent EGEN mold in Lüdenscheid on 01.07.2010 in the Dietrich Group, we implement complex customer requirements from prototype to series production from a single source for the external tool needs. 01.12.2011 For the EGEN mold has taken over the employees and the fixed assets of the Wiesner GmbH toolmaking capacity expansion. With modern machinery and currently 25 employees, we have specialized in precision molds for technical products with highest quality standards. - Processing thermoplastics Our production line consists of 34 Arburg injection molding machines with a production area of ​​15-200 tons. Closing force. It produces the article of 0.01 g to 300 g in 1K and 2K technology, as well as all-electric machines, monitored by an MDE / BDE system. Metallteilumspritzung, hot foil stamping, clean room manufacturing and assembly are also part of production competence. - Quality To ensure a permanently high level of quality of all manufacturing steps, our company meets the following requirements: DIN EN ISO 9001:2008 and DIN EN ISO 14001:2009-11. Using the latest line of software, supported by 3D measurement technology, supports and monitors our production in what they do. So we place the highest demands of our customers.

We are a Hungarian family owned enterprise dealing with plastic injection moulding. Our company has been in this field of activity for 30 years. We have the possibility to produce with our machines (Demag, Krauss Maffei and drBoy) items with a mouldweight up to 300 gr with a clampforce max. 150 tons. We also posess the necessary ancillary equipment such as dryer, mouldtemp, materialforwarder, hot runner, coolers... We have experience in the processing of most engineering plastics (PE, PA, PP, PBT, ABS, stabilised and reinforced as well), except PVC. 80-90 % of our production shall be exported, to Germany, to Austria, Swiss and Italy. So far we have been manufacturing in big quantities fittings to heating-systems (floor- and wallheating), engineering parts to machineconstruction industry (textile machinery, lightning), parts for filtration (houses, caps ..), spare parts, items for packaging, buttons, switches and covers according to the specifications of our customers. We do not make trade items, we’re solely subcontracting. Our possibilities allow us to manufacture our own moulds if our customer so wishes if you let us have a sample or an engineer-drawing. To secure the continuous good quality of our products we have introduced and have been maintaining the quality system ISO 9001/2015. To receive further information above our company and to see a select few of the items produced by us please visit our website under http://www.tiller.hu We hope that our proposal is interesting to you and you will contact us in the future with your inquiry. We look forward working with you. Best regards,

Since the foundation of our family business in 1980, is for us the service in the foreground. Personal advice, customer proximity and short lines of communication are that we provide in addition to our high standard of quality and good value for money, some benefits them. As a distributor (representing industry), trading house and manufacturer, we combine competences and different technologies under one roof. Through our network of specialists, we are able to offer a wide range of products. The basis of our quality management system, our certification according to DIN ISO 9001. Take advantage of our experience and technical know-how. Please let us know what we can do for your company specifically. We look forward to your inquiry!

The company horns service consists of a young and dedicated team - we are a CNC processing company with currently 5 skilled workers, which was founded on 01.12.2004. Production of metal and plastic - to coating of polyurethane rubber rollers. Products: * Turned parts with a diameter of 5 - to 500 mm * Frästeile in size from 1-1200mmm * Plastic parts, plastic injection molding * Rubber polyurethane rollers * Prototype * Plastic, polyurethane mold casting * Mould Materials: * Steel forB C45, ST52, ST37, 42CrMo4, 16 MnCr 5 * Stainless steel such as 1.4305, 1.4301 * Plastic such as PP, PE, POM, PVC, PET, PC, * Rubber such as NBR, EPDM, SBR * Polyurethane * Alu eg, AlMgSi1, AlMgSi0, 5, AlMgSiPb, AlMg4.5Mn, Alca5 Delivery program: Rotor shafts, towing eyes, ball joints, pistons, bushings, washers, rings, valve seats, screw, cone, spool, tubes, rollers, drive rollers, rubber rollers, drums Couplings, shafts, axles, hubs, plug, spool, spring plates, pins, rollers, throttle bolts, Nozzles, screws, grinding mandrels, screw plugs, orifice plates, screws, cap screws, pins, cylindrical rollers Heat treatment processes and surface coating: All standard heat treatment processes such as carburizing, nitriding, nitro-carburizing, Teniferierung etc. and the usual method of surface coating, eg CIC coating,

Whether tools, gauges, equipment or individual serial - we supply the technology needed by our customers today and can meet the growing demands in the future. We take the position of the communication interface as well as that of the leader. So we make ourselves responsible for the services provided and learn from the feedback. In our technology pool constantly new customer needs to be recorded, analyzed and elaborated problem-specific solutions. Due to the constant improvement in all areas we want to remain competitive in the future and ensure our financial independence. Was the focus and it is to delight our customers through great personal engagement and thus long-term loyalty to us. Mature, promising high-quality products are an essential prerequisite. In cooperation we live according to the following principle: "Customer satisfaction is our highest priority." This, together with our proverbial flexibility sets us apart from the competition.

For the production of your plastic parts, Mues Products & Moulds GmbH uses the compact injection moulding process employing multi-component or gas-assisted moulding technology. The injection moulding machines used have a clamping force of 125 to 850 metric tons. A pad printing system is integrated into the injection moulding process to efficiently produce printed parts. Your gas-assisted moulded parts are manufactured smoothly and efficiently thanks to the company’s own gas extraction plant. We also have a wide range of welding and bonding systems available for the production of your parts. Have your moulds tested for series production or have your prototype parts injection moulded. We have many years of experience in the production of high-quality parts for car interiors. We also specialise in functional parts for engines and engine compartment design parts. The 3D coordinate measuring machine can determine the data of any object you wish. We document initial sampling reports and also proof of process capability certificates.

TEHNOMAT (pronounced Technomat) is a family company formally established in 1991, immediately after Slovenia's independence. It continues an enterprise established in the town of Kranj over 30 years ago by Drago Česnik. In 2003, the company moved to a new 2,400 square metre site where an improved working environment has provided conditions for expanded production and sales. The company permanently employs 10 workers. All employees are constantly involved in training in such areas as comprehension/recognition of new material and operation of new machinery at all stages of production, particularly the use of CAD-CAM technologies. Our company has a serious commitment to the creation of a healthy, safe and motivating working environment. We believe that this approach, together with modernisation of technology, accounts for our high level of productivity.

Since our inception in 1958, we bring in plastic form. As An- Established man-trade agency, our company has over the Decades to become a leading mid-sized companies in Developed plastics processing sector. To date, independent and family-owned, we currently employ more than 70 employees and have a warehouse, office and production area of ​​approximately 4,500 sqm. According to DIN ISO 9001 and VDA 6.1 certified , we offer the highest quality in all production areas. Due to the recognized high and consistent quality of our Products, our on-time delivery and competitive prices, our Services in demand in many industries. Premier Industrial companies such as Bosch, Siemens and carmakers such as BMW, Porsche and VW are among our satisfied customers. Top quality! On-time delivery! Competitive prices! This is us! Take advantage of our experience, our skills and reliability to Your advantage.

Everything from one source The BRIEF GROUP OF COMPANIES has short their origin in the founding of the IKO FORMS in Owingen in 1946 by Isidor. To meet the ever-growing customer needs, was in 1980 the SHORT PLASTICS and founded in 1996 the company SHORT PLAST in Kiskörös (Hungary). This consolidated company makes it around the plastic to offer customers complete solutions. The Group operates internationally and is certified according to DIN EN ISO 9001:2000 and VDA 6.1. SHORT is a competent partner for innovative and customer-oriented solutions for the plastics processing. Regardless whether it is with complex injection molds, processing of high-performance polymers and technical thermoplastics, or the holistic project management

Application Consulting

Design development

STL and prototype parts

Toolmaking

Qualification

Series production

Assembly

concerns.

A&T develops, produces and delivers primarily demanding technical articles. Materials with the highest technical qualities, as well as all thermo-sculptural standard materials are processed to hose pouring parts of 1g/piece to 2.400 g/pieces. A&T maintains teamwork and aims at long-term partnerships with costumers and suppliers. A&T offers application-technical consultation, product development including design. Artikel and mould construction as well as form construction are naturally for us. A&T produces with the most modern microprocessor-steered hose pouring machines of the company DEMAG ERGOtech in the clamping force area of 350 to 4200 kn. The systematic supervision of the manufacturing parameters guarantees an optimum product quality. A&T takes over amongst others operations like assembly and packing, processing of inlaying parts, silk screen and tampon pressure. A&T works with highly qualified employees on the realisation of costumer orders. A&T shows costumer-oriented action. To fulfil special demands, it is reacted fast and unbureaucraticly.

TECNOSTAMP SRL is an italian company of plastic injection moulding, located in Feletto in the province of Turin. We are known for our professionalism, quality and flexibility, and for our great ability to produce complex items. We offer our clients value-added services, we are able to design, produce and assemble all of our products and related components. The TECNOSTAMP SRL was founded in 1963 as a mechanical company for the manufacturing of molds, but over the years the company has specialized in the plastic injection molding and recently in the construction of prototypes. Our team is composed of professionals with many years of experience and specialized young people who have brought to the company innovative ideas to face the challenges of a changing market. Our Company operates in 3000m2 and currently has 12 injection molding machines from 50 to 320 tons, assisted by manipulators, robots and specific assemblies for the production of precision technical items, industrial articles and design articles for many sectors. The monitoring of the molding process is continuous, in order to guarantee the delivery of the product to the customer with the highest quality level. To this end, in 2018 TECNOSTAMP srl confirmed the quality certification UNI-EN ISO 9001: 2015. The Plus of the company is the speed and flexibility in the answers to both commercial and technical questions; in the delivery of orders; in adapting and modifying production when they undergo sudden variations with a tailor-made approach according to the Customer's supply and logistics needs, guaranteeing maximum production reactivity.All this thanks to an entrepreneurial vision that follows the model of "lean production", that is, aiming at production simplification through the flexibility and involvement of all company functions in the design and production phases.