2498 Suppliers found
List
Raster
Map
Sorted by 

    Watch

    Trico AG

    The TRICO AG - A small business, which is characterized by quality and flexibility. For Präzisionsdrehteile of all kinds, the TRICO AG is the right partner. We process various materials of up to Ø1.0mm Ø34.0mm.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1984
    Certifications
    ISO 9001:2015

    Watch

    PMT GmbH

    Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials. We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more! We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2005
    Certifications
    ISO 9001:2008

    Watch

    CGS S.r.l.

    CGS Srl is born as artisan company at the end of the sixties to assume, more and more, in the years a real industrial structure; currently it occupies an area of 1500 square meters where work about twenty employees. CGS manufactures a wide range of products including precision components and small parts, drawing fittings for the earthmoving industry, agricultural machinery and oleodynamic systems, as well as components ready for a wide range of industries; They complete the range of transmission organs such as angle heads and jacks and magnetic devices, solenoids and rigators. Thanks to decades of experience and the sensibility and attention for the demands of the clients, CGS Srl is able to offer personalized solutions and high quality by ensuring advice and assistance in the phase of pre-sale until delivery. The technological adjustment and the continuous search of operation models more and more to the state-of-the-art allow CGS to propose to the own clients efficient and effective solutions both beginning from the particulars present in catalog and beginning from the sketches and from the specific applications of the clients. This approach based on the support to the client and aimed to the flexibility allows CGS to affirm its own presence on the Italian and European market more and more. Turning, finishing and treatments CGS is equipped with two production units that perform all the necessary turning operations, organizing overlapping production to ensure a total daily production capacity of approximately 60,000 hours on 17 turning centers. CGS Srl is able to realize precision components with diameter between 3 and 70 mm; the worked materials embrace the whole range of the automatic steels,from reclamation, cementation and good part of the stainless further to brass, aluminium, bronze, copper and plastic materials. Finishing works CGS also has a specialized department in the following stages of finishing: - Reaming, Tumbling, Milling with No 2 vertical machining centers, Lapping, Countersink, Deburring, Surface rolling, Assembling with the possible management of commercial components or supplied by the customer, Micropunting Marking. Grinding processes The department designated about grinding works performs the following manufacturings: - Centerless and Plunge grinding with tolerance of 3-5 microns and roundness of 50% tolerance - Grinding on centers, surfaces, centerless and superfinishings where tolerances are outside of what we can obtain internally. CGS guarantees accurate control of the quality of the works implemented, and therefore of the finished detail delivered to the customer. Washing the parts with ultrasonic and vacuum technology - For all the details that need to treated, they are washed at the CGS production department, before starting the external treatment required to obtain the best result in terms of quality and efficacy of the treatment itself; - All untreated ferrous items are delivered after a suitable washing phase during which a protective substance is applied, with a guaranteed 3-month standard length, which can be extended on request.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2008
    Certifications
    ISO 9001:2015

    Watch

    WKK Kaltbrunn AG

    WKK Kaltbrunn AG - enormously in form The beginning of the WKK Brunn AG is founded in 1967. As a dedicated tooling the company had at that time only one purpose: the production of cutting, bending and forming tools. Shortly thereafter, the fabrication shop was put into operation and some ten years later, the company introduced her first own product. By continuity, innovation and perfection was out of the formerly peaceful Toolmaking a successful SME with about 45 employees.Today, the CHP is an international punching operation with most modern manufacturing methods in the supplier sector. enormously complete - from the first idea to the final series, we offer comprehensive services - Consulting: individual and professional, on-site or at our - Construction: in-house with 3D Autodesk Inventor - Prototyping: short to illustrate your ideas - Tool: for punching tool and teaching building, with modern machinery - Series production: stamping products of all types up to 250 tons of pressure and up to 300 mm width at 3 mm thickness (up to 5 mm after consultation) made of steel, stainless steel, non-ferrous and light metals - Component manufacture: Total manufacturer of your products, automated assembly - Post-Processing: Heat and surface treatments for partners near - Finish machining: by machining (milling, turning, drilling), eroding and vibratory finishing - Did you know? Also welding
    > Read more
    Employees
    20 - 50
    Year of foundation
    1967
    Certifications
    ISO 9001:2015

    Watch

    Aquacut Kft.

    Unser Unternehmen begann seinen Betrieb im Jahr 2003 mit dem Wasserstrahl-Schneiden. 2009 haben wir als erste in Ungarn unsere Wasserstrahl-Schneidemaschine mit einem Kippbarem-Kopf auf den Markt gebracht, der bei einem Betriebsdruck von 6000bar arbeitet. Aufgrund der wachsenden Kundenanforderungen haben wir auch das Fräsen in unser Profil aufgenommen. Mit unseren CNC-Bearbeitungszentren ist auch die Herstellung hochpräziser und genauer Teile kein Problem. Mit unserem hochmodernen Plasma-Schneider können wir fehlerfrei bis 6000 x 2500 mm Maße schneiden. In unserem Sortiment haben wir Platten aus Stahl, Edelstahl und Aluminium von 1 mm bis 100 mm Dicke. Im Jahr 2020 haben wir die Zertifizierungen EN 1090-2 EXC 2 und EN ISO 3834-2 erhalten, die von der SLV Hannover zertifiziert sind. Unsere Präzision und das Fachwissen unserer Kollegen garantieren die einwandfreie Qualität der von uns hergestellten Stahlkonstruktionen, Geräte und Teile. SEIT 2003 SCHNEIDET AQUACUT KFT. verschiedene Materialien mit Plasma und Wasserstrahlen. Wir waren die ersten im Land, die eine 6000bar Schneidemaschine in Betrieb genommen haben. AUFGRUND DES SCHNEIDENS MIT DEM WASSERSTRAHL ändern sich die Zusammensetzung des Rohmaterials und die Gitterstruktur während der Bearbeitung nicht. NEBEN DEM WASSERSTRAHL- UND PLASMASCHNEIDEN gehören auch das Fräsen und Schweißen zu unserem Profil, für das wir zwei Bearbeitungszentren haben. WIR BESCHÄFTIGEN UNS SOWOHL mit kleinen als auch mit großen Schneide-Stückzahlen und entwickeln unsere Anlage ständig weiter, um den Bedürfnissen unserer Kunden besser gerecht zu werden.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2003
    Certifications
    DIN EN 1090

    Watch

    ABP - Innovative Blechbearbeitung GmbH

    The company ABP - Innovative Sheet Metal Processing GmbH sets with the help of modern machinery and well-trained staff, new benchmarks in central Germany and consider writing. Why we? The site Schopsdorf is a well-situated location directly on the A2 motorway. Schopsdorf located in Saxony - Anhalt at the border with the state of Brandenburg. Galvanizer and powder coater located in the immediate neighborhood. Transport distances are short and thus favorable. ABP sees itself not only as a producer but also as a service provider. We are an advisory tätig, develop individual Kundenlösungen and rely on the latest technologies. We are offering the entire process chain of sheet metal processing in the position to offer our customers. Here, we also rely on strong partners from the immediate region. The mixture of our Fertigungsmöglichkeiten with consistently innovative thinking makes your advantage. -Quality product, flexibility and individuality imprinting our mission statement. We are your partner for their products. We offer: - Laser cutting 2D - Laser - tube processing - Bending / folding - Laser Welding - Robot welding - MIG / TIG welding - Processing in the wage - Assembly production - Individual solution finding
    > Read more
    Employees
    50 - 100
    Year of foundation
    2013
    Certifications
    ISO 9001:2015

    Watch

    Rehm Blechtec GmbH

    Metalworking The manufacture of fabricated metal products for innovative industrial applications requiring the highest standards of quality and absolute precision. to have a reliable partner on the side is more important. Rehm BlechTec has over 25 years specialist in metal and sheet metal processing. Our manufacturing techniques and lasers punching, forming, tube processing, welding and surface treatment is as much as the design and development of customized solutions. For the high-quality metal processing, we have an extensive range of machinery with modern equipment.
    > Read more
    Employees
    50 - 100
    Year of foundation
    2003
    Certifications
    DIN EN ISO 3834

    Watch

    Canova&Clo. Srl

    > Read more
    Employees
    20 - 50
    Year of foundation
    1980
    Certifications
    ISO 9001:2008

    Watch

    Bileske GmbH

    We are manufacturing service providers for precision parts in the field of machining technology, as well as the related services. On-time delivery and compliance with the cost factor are a matter of course for us. Our customers, who have been completely satisfied for years, also trust in this. Individual and prototype or serial parts made of any material can be manufactured using modern technology according to customer requirements. Our goal is always to implement projects with the customer quickly, precisely and efficiently. A constant expansion of the machine park and the cooperation with the cooperation partners guarantee mass-blown solutions for the individual requirements of the customer. What can we do for you? We will be happy to make you an offer!
    > Read more
    Employees
    20 - 50
    Year of foundation
    2022
    Certifications
    ISO 9001:2015

    Watch

    Torneria OML Srl

    Torneria OML is specialized in high precision CNC machining. Since 1982 we have been specialized in the processing of any type of metal. Thanks to the use of the latest generation and highly technological machinery, we are able to guarantee the highest quality and precision, always offering an excellent quality / price ratio. Our qualified and constantly updated staff is able to quickly manage any type of order, from small and medium-sized production to high-precision machining. Thanks to the adoption of modern CNC technologies, we have considerably reduced production times, greatly increasing the reliability of the productions themselves. To always guarantee quality products, we have introduced systematic checks according to UNI and ISO 9001: 2015 and ISO 14001: 2015 regulations. Our company is part of the ATI set up for participation in the project “Venetian mechanical manufacturers on behalf of third parties present themselves in Europe”, which will be implemented using the POR Veneto region funding, part of the ERDF. Thanks to the use of the latest generation and highly technological machinery, we are able to guarantee the highest quality and precision, always offering an excellent quality / price ratio. Our qualified and constantly updated staff is able to quickly manage any type of order, from small and medium-sized production to high-precision machining. We are specialized in the creation of components for the sectors: Valves, Gas Components, Pneumatic Components, Automotive, Hydraulics, Hydraulic, Naval, Nuclear, Oil.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1982
    Certifications
    ISO 9001:2015

    Watch

    Arcobaleno Srl

    Arcobaleno Srl is a sheet metal proceeding company that works carbon steel up to 25 mm, stainless steel and aluminium up to 20 mm, brass up to 8 mm and copper up to 6 mm. It has a laser cutting department: 1 mitsubishi fiber ml3015ex-f80 8000w, 1 mitsubishi fiber ml3015gx 8000w and 1 trumpf fiber bright line 5040 8000w. Working range 1500x3000 and 2000x4000. It is equipped with combined laser punching machines: 2 finn power lpe5 with automatic loading and unloading It has a combined shear punching machine and an Amada Aries punching machine. It has an automated bending department: 2 Ras multibend bending machines with automatic loading and unloading system, 1 RAs XLT Bend and 2 Amada robotic bending cells. It has a manual bending service with 35 press brakes with a maximum reach of 4000 mm. It is equipped with the tig, Mig welding machine and electric punching. it supplies the assembled material, the assembly of inserts, rivets, studs, bushings and pins. it can supply painted, galvanized, screen-printed or with different finishes It is certified ISO 9001:2015. its strengths are quickness, quality and competitiveness
    > Read more
    Employees
    50 - 100
    Year of foundation
    1987
    Certifications
    ISO 9001:2015

    Watch

    Ernst Reiner GmbH & Co. KG

    PEOPLE WITH EXPERTISE AND EXPERIENCE As a customer, you benefit from our generation-spanning experience and high quality awareness our specialists, which they continuously pass on in the company and in training. When it comes to tightest tolerances, complex geometries and demanding surfaces, REINER is your contact partner. ZINC DIE-CASTING With zinc, extremely filigree or thin-walled, technically high-quality parts can be cast and a very high degree of accuracy is achieved. In addition, zinc die-casting guarantees high productivity even with small quantities and, thanks to its durability, is a very interesting economic process. At our location in Furtwangen, zinc die-cast parts with a part weight of up to 700 grams cast in die casting machines with a clamping force of 5 to 125 tons. With a maximum clamping area of 400 x 600 millimetres, we cast the alloy Z410. MIM - Metal Injection Moulding In series production, MIM opens up completely new technical possibilities - right up to highly complex geometries and always with optimised cost-effectiveness. Cross holes, internal and external threads, gear teeth and surface structures are easily integrated into the component by MIM. The process combines the freedom of plastic injection moulding with the properties of metals. At REINER, a selection of low-alloy and stainless steels is used here. PRECISION CUTTING with forming technology In the field of precision stamping and forming technology REINER offers a range of processes and technologies for high-precision stamped and bent parts. Fine punching, hydraulic bending processes, NC punching or NC bending are as much a part of this as laser cutting. ASSEMBLY SERVICES Thanks to our expertise and range of services as a specialist component manufacturer, we can also process complete assemblies, partially assembled assemblies, components, system assemblies and assembled individual components for you. A unique selling point of REINER in component assembly is the vertical range of manufacture, which starts with the sketch plan if required. In the in-house development center, engineers are available at CAD stations to work out plans and transfer them seamlessly into the production of the components. TOOLBUILDING We are your partner for mould making, precision stamping tools and devices. The equipment: - CAD / CAM for design and production - sink and wire eroding - Surface, profile and jig grinding - Most modern CNC programming technology - HSC milling - Coordinate measuring technology for form and pattern measurement - Centres for machining - Services from the design to the finished component. In addition to the design and manufacture of tools and devices, we carry out maintenance and repairs ourselves.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1913
    Certifications
    ISO 9001:2015

    Watch

    Net-Components GmbH

    Net-Components GmbH was founded in 2003 by Mr. Dipl.-Ing. Tarkan Peker after many years of experience in drive engineering and transmissions manufacturing. Net-Components is certified with DIN EN ISO 9001:2008. We always aspire toward market driven and customer oriented solutions by means of our acquirements on international market and goal oriented method of working. We are responsive to requests of our customers and always systematically develop new solutions, which are the reason why our market share continuously increase. The development of complicated tasks in mass production, medium and small-series production, prototype construction, to made-to-order production takes place at modern machining centres which assure consistent quality and flexibility according to wishes of customers. We are able to deal with short term as well as long term capital investments toward order situation, therefore we ensure a smooth production in terms of quality, date and cost. To manufacture our products according to safety and environmental friendly operations and to meet the high quality requirements belong to our company’s policy. We strive to lead our customers to better competitive position with continuing advancement and cost effective production. We always aim and attach great importance to education and training of our personnel. They act quality conscious and have an impact on continuing advancement. This is the right place for you, if youare looking for a competent partner in the field of drive technology. As a certified company, we are specialized in the production of turning- and milling parts, casting- and forging parts, laser- andsheet metal parts as well asspecialproductions completeour product range since 2003. With our expertise, we are able to support you during the development phase. Highly motivated, well-qualified staff and most modern production equipments are the basis of our success.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2003
    Certifications
    ISO 9001:2015

    Watch

    Ansla Science Technology Co., Limited

    Ansla was found as we want to make better quality goods and services for customer, we have very professional team and precision production & inspection equipment. All of stuffs have over 10years in the metal and plastic product field, They are dedicated and passionate, can provide professional products, manufacturing services, and can quickly respond to any guest's problems….
    > Read more
    Employees
    50 - 100
    Year of foundation
    2019
    Certifications
    IATF 16949:2016

    Watch

    Sirius Maribor d.o.o.

    The family company with a lot of passion for precision, quality and customer satisfaction. Sirius Maribor d. o. o. (Limited Liability Company) was founded and registered in the District Court of Maribor on October 30 2003. When founded, Sirius Maribor employed 20 workers who produced equipment and technological functional units intended to customers in Austria, as well as in Slovenia (approximately 10 %). The number of employees has risen to 70 due to encouraging work results and increasing demand for our products.
    > Read more
    Employees
    100 - 200
    Year of foundation
    2003
    Certifications
    DIN EN 1090

    Watch

    Blechform24 GmbH

    We are a young plate processing center in the heart of Saxony and edit sheets up to a length of 4000 mm and a plate thickness of 25.0 mm. Our services for you: - Laser cutting, - Folding, - Threading, - Sinks, - Drilling, - Welding, - Turning, - Milling and - Powder coating
    > Read more
    Employees
    20 - 50
    Year of foundation
    2011
    Certifications

    Watch

    JOBO Spezial-Maschinen GmbH

    JOBO Spezial-Maschinen GmbH was founded in 2012 at the Vechta location. A manufacturing facility with an associated office building was built here in 2015. As a young company, JOBO would like to establish itself as a manufacturer of machines for the national and international market in the near future. Particular attention should be paid to the optimization of existing and the development of new concepts for machines for use in swamp or moorland areas. In addition, JOBO will deal with systems and equipment for the oil field industry, pipeline laying and controlled drilling technology. JOBO will work out the customer-specific special solutions that are often required here together with the respective customers. JOBO's range is supplemented by the areas of procurement and trading of equipment and devices from the above-mentioned segments on the international market. JOBO employees with the necessary experience in the respective specialist areas are available to implement all of these tasks and goals. In the future, JOBO will continue to supplement and expand the workforce with competent employees. JOBO hopes to be able to offer young people an apprenticeship position in the future
    > Read more
    Employees
    5 - 10
    Year of foundation
    2012
    Certifications

    Watch

    KleRo GmbH Roboterautomation

    You would like to make metallic components additive? Are you interested in the possibilities of this technology? With the additive manufacturing of 3D-printing metal (SLM, Laser-cusing®, DMLS etc.) we offer you a production technology that is no longer used only in prototype production. This process offers completely new possibilities where conventional processes such as laser cutting, turning or milling reach their limits. This is a process that is used exclusively for the production of metal. As with 3D printing, the components are built up by layer-by-layer build-up and fusion of metal powder; the component has almost identical mechanical properties to the original material. You need support in implementing your automation project? Then you are exactly right with us! We realize complete manufacturing cells according to your idea. From the feasibility study on the construction and assembly to commissioning and on-site support, we are the right partner for your project. In particular, we cover the following areas of responsibility: - Project Management - Programming - 3D printing metal (additive manufacturing) - Security management - 3D scanning - Milling technology - Construction - Assembly - Hose packages - Service - Training Our 3D metal printing services at a glance: - construction work (cooling ducts, component optimization, etc.) - Checking the cooling channel design (flow simulation, thermal images, flow analyzes) - coatings - Plastic prototypes - Component measurement - Creation of plastic models - 3D scanning / reverse engineering - fine machining (milling, grinding, eroding etc.) - Surface treatment (anodizing, electropolishing, etc.) - hardening - welding
    > Read more
    Employees
    20 - 50
    Year of foundation
    Certifications

    Watch

    Maschinenbau Fegler

    It does not matter what kind of error or problem your system has. Our competent service team will take care of your matter. Our range of services from Remagen is very diverse. We offer the right solution for you, from maintenance to assembly service and CNC production to a wide range of spare parts. We will also help you in the field of special plant construction. We offer each customer an individual solution that is tailored to the customer-specific branch or industry. Because no area of application is like the other. Our technical know-how and innovative solutions ensure a great competitive advantage that is worthwhile. Take us to Ko
    > Read more
    Employees
    < 5
    Year of foundation
    2020
    Certifications

    Watch

    L+M AG

    At L + M, every customer will find their own “menu”! Whether contract manufacturing, either carried out in Switzerland or Slovakia, or overall projects from advice to the installed product. L + M = A la card - customer in focus! No matter how you decide, you will receive personal advice from us, the person responsible for sales remains your personal contact person until delivery. Market services: our competencies - your benefit Advice: We develop solutions from one source based on your ideas and needs. Engineering: proof of strength / FEM, 3D-CAD and conformity according to MRL 2006/42 / EG Production: series, tools and special constructions up to 15t or 9mx12m Production: locations in CH and Eastern Europe (> 4'000m² production and storage area) Welding technology: Our SFI + SFM guarantee welding quality at the highest level for steel, stainless steel and non-ferrous metals Quality: Evidence according to EN473 / ISO9712, customer approvals and project documentation Project management L + M Remigen: Excellent network of qualified partners and suppliers. In any case, we are your right contact from the region.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1962
    Certifications
    DIN 4113

    Watch

    Melchers Components - Melchers Tech...

    C. Melchers & Co. was established on January 1, 1806 in Bremen, where the global company still maintains its headquarters to this very day. In the first few decades of the company’s history, over 30 ships sailed the oceans of the world under the Melchers flag, linking the ports of Europe, America and the Pacific. In the 1860s, C. Melchers & Co set up operations in Asia, where all its trading interests swiftly moved. At the same time, with the onset of steam ships, it abandoned its own shipping business to devote itself entirely to extending its trading operations. 1866 saw the establishment of the first branch in Hong Kong, in the wake of which China began to develop into a key lynchpin for the company’s business. The ensuing decades were a period of rapid growth for Melchers in China, with over 2,000 people employed at 12 branches and plants throughout the country. The First World War proved to be a setback for business relations, although business quickly recovered. It was not until the end of the Second World War in 1945 that business came to an almost complete halt. Even so, the company continued to survive, re-opening its first branches in Hong Kong, Singapore and Kuala Lumpur in the early fifties and gradually extending its branch network across Asia. Following the opening of the Chinese markets at the end of the seventies, Melchers set up branches here again, underscoring the significance of Chinese business for the company. With the establishment of a branch in San Francisco in the early eighties, the company also started to engage in US-Asian trade so as to gain a share of the rapidly growing trading relations between these two regions. Trade with China remains a key focus of the company’s overall business, comprising as it does imports of special natural products and finished goods on the one hand and exports of plant, machinery and supplies for the Asian industry on the other. Yet, business with South East Asia has since also come to the fore, with the company amassing broad-based expertise in marketing and selling consumer goods in particular. There are special departments for each article group in Bremen as well as at the foreign branches. They work largely independently within the overall company and are staffed by highly qualified experts. Over 1,000 employees in Germany and abroad assist customers and suppliers with their specialist knowledge. Rather than being based at the company’s headquarters, most of these employees are now stationed at subsidiaries, something which in turn reflects the company’s further development and the strategic alliances which it has forged.
    > Read more
    Employees
    > 1000
    Year of foundation
    1806
    Certifications

    Watch

    HÄNI + CO. AG

    We produce with the most modern Machines for manufacturing pre-finished turned parts for customers in the automotive, electrical and medical (ISO / TS 16949, ISO 13485, ISO 14001). We process steel, nonferrous metals, aluminum, titanium and plastics, On ... lathes, single spindle, multiple spindle and rotary transfer machines, ... In diameters ranging from 1 to 42mm. For more information see www.hanitec.ch
    > Read more
    Employees
    100 - 200
    Year of foundation
    1939
    Certifications
    ISO 9001:2008

    Watch

    Wagner Sondermaschinen und Metallbau

    Special machine for Wagner: Everything does not exist! We live innovation and look forward each time on new challenges! Whether targeted conversion of trucks, whether trailers, industrial plant or special solutions for your needs - Wagner Special machine puts your desires to professionally! Mechanics, hydraulics, electronics - we have the professionals at work We analyze the present problems and develop inter-plant solutions! In Wagner the planning and implementation of electronic, hydraulic and mechanical components are. So that we can surprise you with our solutions. Over and over again. Produced entirely in Germany We guarantee our machines! For that reason, we never use on purchases from abroad. We build your products completely in our own workshop. Whether special size or special solution - where it says Wagner Wagner is also in there. And only Wagner!
    > Read more
    Employees
    10 - 20
    Year of foundation
    2007
    Certifications

    Watch

    TechnoMetal s.r.l.

    Technomatel is specialized in welding and construction of welded structures in steel and aluminum. We are certified by Uni En Iso 9001 and Uni En Iso 3834-3. The welding is performed manually for small series and robotized for medium and large series.The welding processes available are mag, mig, tig. We are 40 employees. We are able to supply the product of metal carpentry complete also of surface treatments (cataphoresis coating, powder coating, electrolytic galvanizing and hot galvanizing).
    > Read more
    Employees
    20 - 50
    Year of foundation
    2013
    Certifications
    DIN EN ISO 3834

    Watch

    Industriemontage

    Our company specializes in sheet metal- and profile processing. The latest CNC technologies, software and productivity helping us with high productivity to advance. We offer document processing, laser or water cutting, bending, welding and surfacing including reliable delivery. In addition, we offer experienced German speaking welder, pipe fitter and foreman for pipe assembling. Our employees gained experience on various construction sites throughout Europe, see below www.industriemontage.sk. Our products match with the strictest European standards. The company is certified with ISO 9001: 2015. The main aim of our company Industriemontage is the satisfaction of our customers, especially with the quality of the manufactured products, together with just in time delivery. More about us can be found on our website: www.industriemontage.sk
    > Read more
    Employees
    20 - 50
    Year of foundation
    2014
    Certifications
    ISO 9001:2008

    Watch

    CP Tech GmbH

    CP Tech GmbH from Büren has been part of the Nedschroef Group since June 2017 and focuses on innovative in-house products, engineering services, high-performance components and complete solutions for the automotive, motorsport and aviation industries. The focus of the corporate strategy is on the development of new mobility concepts, shaped by global trends such as e-mobility, lightweight construction, networking, sustainability and autonomous means of transport. With around 210 employees, CP covers the entire value chain from development through project management, production and assembly to testing and validation of complete vehicles. The core competence of CP lies in the production of high-precision lightweight components from high-strength steels and the interaction of hand-held welding processes, heat treatments, mechanical processing, including the associated device concepts. CP also has its own agency in Shanghai (China) and works there with various companies.
    > Read more
    Employees
    100 - 200
    Year of foundation
    2006
    Certifications
    DIN EN ISO 3834

    Watch

    mech-tron GmbH & Co. KG

    innovative, metal-working company produces components from sheet metal incl. milled and turned parts specialised in developping solutions to realise specific requirements of customers Optimizing the value chain of the customer: The firm achieves this aims due to: - counselling, support in constructing and - designing your product - from the prototype to series production - everything from one source definite technological orientation > consistent investment dicision high degree of automation > production 365 days a year or producing in multi-shift operations highest quality standards at reasonable price-performance ratios
    > Read more
    Employees
    100 - 200
    Year of foundation
    2000
    Certifications
    ISO 9001:2015

    Watch

    interco Group GmbH

    Quality. Competence. Engagement. The interco Group! is an international specialist for high-quality products and services. These include rehabilitation solutions in the area of sitting and positioning, technical services and production support as well as training and consulting services. All offers are characterized by an excellent price-performance ratio.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1989
    Certifications
    ISO 9001:2015

    Watch

    Meba Automation GmbH

    Your competent partner in sheet metal processing Automated lasering, edging and laser welding  High flexibility, even with short-term inquiries  Reliable customer service: from the offer through production to delivery  Inexpensive production of medium and large series with constant high quality  A young team that gives you competent advice 24/7
    > Read more
    Employees
    20 - 50
    Year of foundation
    1999
    Certifications

    Watch

    SKRAWIT

    We are a metalworking company. We specialize in turning and CNC milling. We also design in CAD programs. We are a supplier of devices and instruments for companies. We work with automotive companies, where we most often provide tools for the production and testing of fuel lines. We have perfectly mastered leak testing. We invite you to cooperation.
    > Read more
    Employees
    5 - 10
    Year of foundation
    2015
    Certifications
Limit search by:
Region
Technologies
Materials
Company data
Industries
Certifications