Find Machine elements .

The Herbert Hänchen GmbH & Co. KG is a modern medium-sized company with years of experience in design and production of special purpose machines. We provide not catalog products, but exactly what you need. Our production structure is designed so that we can realize for you unique pieces and small series. We are happy to take over the development and design for your individual machine element or customize according to your drawing. Production of precision parts: - Bars, shafts, tubes - Guiding elements and sealing systems - Fasteners More product portfolio: - H-CFRP components made of carbon - Hydraulic cylinders - Clamping units - Pressure intensifier - Complete hydraulic drive systems

Welcome to the Web Site of Karcoma-Armaturen Decompression valve, pipe filter, drain cock: Just three examples of a few of our innovative products around the engine construction. We design, develop and manufacture fittings. This includes fuel fittings and filter elements such as pipe filters, straight-way filters or fuel filters (gasoline filters) as well as fuel cocks and drain cocks. Karcoma-Armaturen GmbH also specializes in the decompression valve, one-way restrictor and other valves such as the aeration and vent valve. Need a customized solution? We are ready to work together with you to develop a customized design for your special fuel fittings needs. From design to assembly, you are kept well informed.

GRINDEL, a leading company in the transmission elements sector, specialises in the production of high quality gears and splined shafts, adapting to customer requirements according to plans or samples. We are involved in small and medium-sized production: ranging from lots of 1 unit to several thousand a year. Our core competente is the production of ground gears. We have a large portfolio of customers of international prestige and our presence has been consolidated on the markets of the most demanding countries in the EU. Among the main applications for which our products are destined are cranes and hoists, machinery for public works, lorries and 4x4 vehicles, pumps, compressors, reducers, diesel engines and machine tools. We are equipped with most modern machinery which, combined with highly skilled personnel and a policy committed to continuous improvement, translates into a product and service of the highest quality.

The workshops SLG - Ingenieurtechnik GmbH independent provider of engineering services are located in Beckerstraße in Chemnitz. With more than 15 years of success market, SLG sees core competences research, development and technical services for industrial companies and crafts businesses. Besides developing and designing prototypes technical tool-building, the domestic appliance industry and specialpurpose machinery, existing workshop equipment and a qualified workforce are able to produce parts, assemblies through to the making of complete spec pose machinery, even at very short notice complex technical services can be provided implemented in cooperation with the net regional partners. A highly-qualified technical and engineering environment including 3D CAD and the co own development lab. forms an intelligent for the staff to implement ideas into prototypes. In order to expand future competence using “intelligent mechanical engineering" and to further technical cooperation with like-minded partners SLG - Ingenieurtechnik GmbH participates in the “microtec” network. As a systems par company is integrated in the development manufacturing and assembly of mechanical engineering elements and components for special-purpose machinery used for making high-precision micro-technical components. The then incorporates existing practical experience in prototyping and the workshop in special areas such as the forming, joining and processing innovative materials, In particular, expertise in process development, structural applications practical implementation widens the services in order to address a larger spectrum of customers. Independent, qualified and skilled consulting and support services for quality management environmentally-friendly operations and occupational safety in small and medium-sized companies successfully contribute towards the corporate development of a firm. SLG also designs implements accompanying management processes so that the customer in the concentrate on its core business. SLG is counting on innovative growth for the future and has a strong interest in forming cooperations with partners at home and abroad.

We - Metaspan GmbH - are a family company focused on metal contract machining and with many years of experience at our location in 53894 Mechernich we offer high-quality milling, drilling, turning and grinding work. We are primarily designed for the mechanical processing of components of medium and large dimensions. Our production area is around 2,300 m² and we are able to process components weighing up to 50 tons. Our CNC portal milling machine has the longest travel in the X-axis with 8,700 mm. The maximum turning diameter is limited by our CNC vertical lathe and is 1,650 mm. For historical reasons, we have a high level of expertise in the processing of machine elements, so that we are well positioned to comply with the tightest tolerances and high quality.

GMR Endüstri Teknik is a foreign trade company, which is supplying custom made drawing parts and industrial products from Turkish Industry according to variable customer demands. GMR located in Bursa, Turkey where is the heart of Turkish manufacturing industry. We are focused especially on custom made parts for European automotive manufacturers and their suppliers. We are supplying precision turned&milled parts, cold&hot forged parts, special connecting elements, sheet-metal parts, laser&stamped parts, welded components, aluminium injected parts and cast-iron parts for automotive and various industries. The range of products that can be supplied by GMR with ease of access to powerful factories located in the surrounding provinces are quite large. Apart from semi-finished and finished products, various raw materials like aluminium sheets and profiles, cold&hot rolled pipes, acrylic sheets, aluminium foils, special packaging goods and all kind of industrial demands can also be supplied by GMR with required certificates and test reports.

Our company stands out with expertise and years of experience in welding, adhering to high industry standards. Our production process is carried out according to established standards such as EN 3834-2, EN ISO 15085-2 CL-1, EN ISO 1090-2 EXC3. Welding of stainless steel, steel, and aluminum is conducted in separate halls, ensuring high-quality production in compliance with industry regulations. With a total production area of 4000 m2, our facility includes welding halls where a team of thirty qualified and certified welders, supervised by an internal welding engineer (IWE), operates. Thanks to our large capacity, we guarantee prompt and efficient delivery of both individual and batch-produced items to our clients. One of our factory's unique features is the ability to provide corrosion protection for welded products within the same facility, reducing the risk of damage during handling. We utilize advanced technologies such as painting and powder coating to ensure excellent anti-corrosion properties. Our factory is highly flexible and adaptable to client requirements. Currently, we work on projects in various sectors, including: Railway vehicles (construction parts, interior, exterior) Highways (steel structures) Medical equipment (enclosures, supports, cabinets) IT industry enclosures Mechanical components Industrial equipment Construction structures Metal components Feel free to reach out to us with your drawings and request for a quotation. Custom production and the realization of your projects with expert welding are our specialties.

Founded in 1895, Dillinger Fabrik gelochter Bleche GmbH has more than 100 years experience in the field of manufacturing and processing perforated plates. Together with its subsidiaries and affiliated companies, the Dillinger Fabrik group employs more than 380 people, 200 of whom work in the Dillingen location. Our perforated plate products are sold directly and by our foreign partners in more than 20 European and non-European countries. On this website, we would like to introduce ourselves as one of the leading European manufacturers of perforated plates, offering an exceptionally wide product range: from ultra-thin sheet to 30 mm thick perforated plates; from complex housings for electrical switchgear to medium-sized plant engineering; from perforated slotted casings to installation-ready rotary screens for large-scale mineral processing and sorting plants. The use of laser systems, the welding processes Metal Inert Gas Welding/Metal Active Gas Welding, Tungston Inert Gas Arc Welding, Plasma Jet Welding, and various processes of surface treatment enable us to meet almost any customer’s requirements in the field of perforated plates and further processing of perforated plate. In addition to manufacturing and processing, we provide advice to our customers right from the product development phase to jointly secure production and cost-optimised design of the outsourced parts. Our CAD department will be glad to supply appropriate drawings.

PTG GmbH was founded on November 10th, 2006 by the company Gröber Metallverarbeitung. The core competence in surface finishing through superfinishing was supplemented by the strategic procurement management of drawing parts and assemblies as well as the trade in sliding elements.

Conal Ltd. is a manufacturing company and provides constructive and decorative aluminum profiles and sheets, usually close tolerances in the specifications. Further cooperation in the components and systems manufacturing, sourcing partnership in projects (OEM) and the development of products and the construction of prototypes The focus is on the machine CNC milling up to 7.00 x 1.25 m (4/5-achsig), automation in small part machining, partially automated plate profile cutting and processing (from 4mm plate) Summary: Machining: CNC milling, sawing, punching Machining (subcontracting) Pre-processing of aluminum extrusions Processing of rolled material Machining including procurement of materials (components manufacturing) Surface Engineering: Sand, anodising, painting System supplier (OEM) for best. industries Partnership in development / construction, AV

WVG alu-tec GmbH has specialized in the development and production of cast elements of aluminum in permanent mold casting. One of our strengths is our flexibility in achieving the ideas and requirements of our customers in connection with the manufacture of products that meet the highest quality standards. Starting with the conception to the finished product and beyond in the packaging and logistics, we are your competent partner for consulting, design and development, production and surface finishing of cast aluminum parts. When it comes to innovative, economical solutions in the handling and processing of aluminum components, we offer you our complete service - "Everything under one roof" - to the side. We manufacture components made of cast aluminum for electrical, furniture, automotive, pumps, machinery, equipment and medical industries

welcome and thank you for your interest in G. Taube Modellbau CAD-Service GmbH. We are a medium-sized family company based in Hassloch, Palatinate, which was founded in 1986 by Günther Taube. Profound cross-sector know-how, professional use of traditional and proven as well as the most modern materials and technologies as well as craftsmanship guarantee our customers innovative and flexible solutions even for complex tasks. In this context, we are particularly proud of one of our developments, the “T&T receiving device for workpiece holders”, which is registered with the German Patent and Trademark Office and for which we were awarded the 2011 Innovation Prize from the State of Rhineland-Palatinate. We are also certified in accordance with DIN ISO 9001. Whether it is the production of a single part or the production of small or large series — our highly motivated and qualified team always strives to implement even the most unusual ideas in a customer-oriented, precise and of the highest quality level. Our customers include well-known companies in the automotive, aviation, packaging and supply industries. We hope to see you among our customers in the future. We are looking forward to hearing from you. Sincerely, Your Günther Taube and team

HANZATEC is manufacturer different of spare parts made of plastics (PC,PE, PA, POM, PMMA, PVC, PEEK,etc.) and technical rubbers (SBR,NBR,CR,EPDM, etc). We have been a supplier of this assortment for many years to manufacturers in the machinery, equipment and installations industry, as well as the maritime and offshore industries. Our products and services include: • any structural elements according to the customer's technical drawings produced on the basis of mechanical processing (CNC machines) • trundled parts including gears and sleeves, • guides for chains, belts, • Slides and sliding strips of all kinds • Rubber covers and coats • Flanges, snails, pipes • Spacers and gaskets/seals • milling molds for castings Production carried out in accordance with ISO 9001: 2015 certificate issued by DNV GL. We have a modern machine park (large-format CNC plotters / machining centers, CNC lathes, waterjet machines) and a professional team.

Services of Hametec AG include the contract manufacturing of CNC machined and - turned parts up to 5 axes, welding TIG MIG MAG, punching, folding and bending work and the glass beads. The areas of expertise are diverse, most notably the production of Chromstahl¬ assemblies and welding technology are among the strengths. We are quickly and proactively and offer also the following services: - Delivery in KANBAN - Comes with storage - Delivery of safety parts "Charge Professional" - Plastic parts in "food grade" Continuous improvement as an added value for our customers Our exceptional CIP approach is a key element of our success. We are convinced that we can offer our clients significant added value with our CIP methodology, which helps them to become more competitive. Our customers have benefited this year from product savings of 3-28%. Try us.... Ask for our corporate presentation and see for yourself how we value our customers. Translation by Google Translate

We are Specializing in the manufacture of turned and milled parts on CNC machines, and offer Single and series production of all machine components. Contract manufacturing on new CNC lathes and CNC machining center. Of repairs of machine components. our products Our specialty is in the rotation, where we can offer good and Cheap work with our lathe including bar loader and driven tools (numbers from 30 to 50,000 pieces). On the CNC machining center, we can also manufacture larger parts. Inlaid work of individual parts and larger numbers (up to 5000 pcs) are possible. Short delivery times are guaranteed. Products and processing Lathe parts CNC - Double spindle of diameter 10 mm to 60 mm length of 150mm Turned on the NC - machine up to diameter 330 mm and length up to 1800 mm Milled parts on the machining center of x-1200 y 650 z 650 mm Material processing There are processed in our steels S355 JRG and all CK35 CK-60 steels and high-quality stainless steels quenched and tempered steels, brass, bronze, aluminum and plastics. Processing methods Our CNC machines allow a complete machining of complex components. our Lieferbrogramm Turned parts, milled parts, bolts, screws, nuts, standard parts, sleeves, distances, plugs, shafts, axles, tubes, bearings, studs, rollers, hubs, washers, bolts, bushings, glass holder for the Fasadenbau clamping elements wedges keyways threaded plates, drive shafts, gears, sprockets, bushings, bronze bushings, caps, collars, collars, dowel pins, studs, Locking screws, special screws ....... Surface treatment Chrome plating Gilding Zinc plating In addition, we offer the following technologies: Inert gas welding Pulses including CNC rotary table rotary welding locksmith

Experience and Innovation More than 30 years of experience in the field of metal processing form the basis for our daily business. National as well as global industrial customers from various industries, we count among our customers. We manufacture and procure almost everything is manufactured from metallic materials or plastics. We support the mission of the advice on the drawing (CAD / CAM) to the finished product. Latest technologies, advanced manufacturing equipment and our courage to innovate guarantee the highest quality.

Firma "MPR" Petrović Mito has been specialized for production of various mechanical elements since 1983. We have been in the group of main suppliers for thermal power plants for over 20 years.

We are your service provider in the following sectors Electron beam welding Electron beam hardening Laser welding Design meeting the requirements of electron beam welding Development of electron-beam welding equipment Electron beam welding totally annuls the classical requirements like: Same material, Same material thickness, Low heat conduction, Low content of companion elements and Low carbon content. The reason for that are the narrow deep seams and the high process speeds. Therefore, this method is not limited to standard materials but may also be successfully applied to special materials, various material combinations, thin-walled and thick-walled structures. Economic solutions are always based on designs meeting the requirements of electron beam technology since the technological advantages of electron beam engineering, weld joint testing and savings in the processing operations are combined. The clever and extremely cost-saving component design simply uses the specific features inherent to electron beam welding:

Narrow weld seams due to energy input <= 1% in comparison with TIG or MAG seams - resulting in minimum shrinkage and minimum distortion

Narrow heat-affected zone - permits relief of welding stresses through equalisation with the elasticity of basic material

-The “taff!” training centre directly on site in Bassum -Current production capacity of 8 million geared drive elements per year -Degree of automation in production > 95% -Over 240 precision robots ensure seamless workflows -More than 290 CNC machines -small-, medium- and large-sized parts production -Our own heat-treatment facility -Certified also to ISO 50001

We are manufacturers of signage systems. With a high level of vertical integration, we produce almost all parts in-house. The production Speed and quality are only possible with this comprehensive in-house production depth: sheet metal processing of aluminum, stainless steel and steel sheets. Shearing, edging, round bending, CNC milling, welding, drilling, sandblasting, painting. aluminum profile processing sawing, CNC milling, drilling, welding, anodizing, painting, welded structures made of steel, galvanized up to 6 meters high, made of aluminum and stainless steel. plastic processing Mainly made from acrylic, partly from polycarbonate and from PVC. sawing, CNC milling, gluing, thermal forming, 3D contours. paint shop With our own color mixing system in over 3,000 recipes for individual color design in all RAL colors and in Pantone shades. Also using the NCS color system and as an anti-graffiti protection coating. lettering in large-scale digital printing on foils or as UV printing directly on solid materials, as well as with adhesive films. Engraved and raised tactile writing for the visually impaired, Braille and relief letters. Facade lettering made of stainless steel, aluminum and plexiglass, illuminated letters and banners, individual light boxes with decorated fonts. integration of electronic displays, screens and computers as media elements. Also letterbox systems and brochure holders. Call systems, outdoor and indoor display cases. Processing of glass plates for glass signs, from glass door signs to large glass stele.

Development, production and sale of seals and sealing systems, Parts We see ourselves as a "problem solver in sealing technology" and finished in our own production on the latest CNC machinery seals from all popular semi-finished materials (NBR, Viton, EPDM, HNBR, Silicone, AFLAS, PU, ​​PTFE, POM, PA, PEEK, UHMWPE ) and from the "Red Super Polymer"; introduced a high-performance material up to a diameter range of 710 mm with short delivery times. Seals up to 2000 mm are available on request. We manufacture batch sizes from 1 piece within a few days. (24-hour delivery and overnight express delivery possible) Our stock includes more than 35,000 different items and dimensions and thus we consider the complete range of hydraulic seals, shaft seals, O-rings, guide elements, support rings, PTFE and PTFE compounds, as well as shape and special parts in stock

Hey, we are Scheidegg Salem and you might be asking yourself as a buyer for sheet metal parts why working with us is fun and exciting, quite simply: 👇 The sheet metal parts of our well-known customers that we have produced fly in the Airbus A400, which ensures safety and the necessary care for people in need, are in the flight tower of Berlin airport to ensure people a good start and a good landing, are in many Medical practices that help people to finally get well with innovative devices work in operating theaters to hygienically secure everything and thus protect the patient, you can see important things in German sports cars in rail vehicles so that the ceiling paneling looks appealing and the passenger feels comfortable Carbon elements so that the driver has an unforgettable driving experience and can be found in many other technical elements so that they look damn good, work optimally, development progresses and the respective customer has a significant market advantage. For us, the sheet metal parts of our customers are not just any metal part but important elements that contribute to making your customer product successful. High dimensional accuracy makes complex mechanics functional, high-quality manufacturing processes make the sheet metal cladding a high-priced design highlight, and partnership-based collaboration makes meetings feel like meeting friends and that is what makes it so productive. If you also want a sheet metal processor who knows the high value of your products and who does everything to meet your requirements or even exceed them, then please let us know by phone or ask directly. For a phone call, look for an appointment that suits you. I'm looking forward to it and see you soon! Book a call 📞 here: https://lp.scheidegg-salem.com/termin/linkedin/

mbo Osswald has been in existence for more than 50 years now, and that name has just as long been a guarantee for high quality mechanical linking elements. Usage of the latest manufacturing techniques guarantees top quality and rapid delivery times. Our Products made of steel or stainless steel (V2A, V4A, Niro, 1.4305, 1.4404, 1.4301, 1.4571, 1.4435) - Clevises, DIN 71752, DIN ISO 8140, clevis joints, DIN 71751, clevises with male thread, clevises with elongated hole, clevises with hardened cross hole, mating pieces for clevises, folding spring bolts, bolts, cotter bolts, DIN 1443, DIN EN 22340, ISO 2340, DIN 1444, DIN EN 22341, ISO 2341, threaded bolts, DIN 1445, angle joints, DIN 71802, axial joints, ball studs, DIN 71803, rivet studs, housings, DIN 71805, ball joints, rod ends, DIN 648, DIN ISO 12240-4, pivoting bearings, DIN ISO 12240-1, rod ends hydraulic, DIN 24338, ISO 6982, DIN 24555, ISO 8133, shaft retainers, retainers, locking washers, DIN 6799, retaining rings, DIN 471, joint rods, machine parts – are standard. We are also the right partner when it is a question of special parts. We manufacture precision turned parts (CNC turned parts) and milling parts in accordance with your specification or offer you the benefit of our know-how to find solutions to your special applications. Our machinery is characterised by high flexibility, special repeat accuracy and short machining times. For you, this means economical production of simple workpieces or even of geometrically complex parts of high-tensile steels with closely toleranced dimensional and surface specifications. We can manufacture for you rod parts and shaft parts made of steel, machining steel (1.0718) and stainless steel (V2A, V4A, Niro, 1.4305, 1.4404, 1.4301, 1.4571, 1.4435) with diameters of 4 mm to 65 mm up to a total length of 650 mm. In particular, cross-holes, turned grooves, millings, multiple-edge turning and complicated geometries can be executed. Whether you require pilot, small-lot or mass production of your special part, we guarantee short delivery times and especially economical manufacture. mbo – Systematic solutions for linking technology

Our company was founded in 1949 by Otto Rimmelspacher in Karlsruhe. We are a universal oriented Lohndreherei and Lohnfräserei. In addition, we are able parts made of steel, stainless steel (V2 and V4) or special materials to weld such as Hastelloy and titanium. Dimensions: Ø20 - Ø300 mm, length up to 3 m, weight up to 200 kg, TIG manual welding, welds with a programmable TIG circumferential seam welding machine. From customers demanded extra-tests of the welds are performed externally. (TÜV, DEKRA, x-ray exams, FE exams, etc.). Furthermore, we can turn, mill and weld plastics. (Heating element sleeve welding or hot air welding). Our metal welders are TÜV - tested according to "EN 287-1141 T". We also process steps according to "DIN EN ISO 15614-1" and "QW-483", and admission AD2000 Module A1 according to Pressure Equipment Directive 97/23/EC. We are also Materialumstemplungsberechtigt for "10204 EN 3.2" At a certification according to "DIN EN ISO 9001:2008" we are currently working, we will complete this certification in the first quarter of 2011. Furthermore, we manufacture eductor and air Reisser according to customer specifications. Eductor are used for pumping water in wells, in low-lying water table. Air Reiser care in domestic water systems for a Constant air cushion in the air pressure tank. These products are designed and manufactured specifically to customer requirements, such as flow rate and head. For more information, please refer to the brochures in our download area. Our 15 employees are almost exclusively skilled metal workers who work independently and know that it comes down to it. On lathes we have conventional center lathes up to a peak height of 250 mm, as well as various CNC lathes Company INDEX to a turning diameter of 300 mm and a tip length of 1500 mm, with and without tailstock, with and without bezel. Our largest center lathe can handle rough-and-work on waves up to a length of 2500 mm and a peak height of 350 mm. Focus of our production is the production of single parts and small to medium series for industrial customers, such as nozzles and diffusers. We also manufacture complete pressure vessel according to customer specification, including flanges according to DIN and ASA. One of our NC lathes can also be operated with hydraulic shuttle chucks for housing to NW 25 or NW 32, the processing can thus be made on 4 sides in one clamping. In NC milling we have a CHIRON machining center with 36 tools and four programmable axes, the fourth axis is set up as a rotary axis. Maximum process paths X = 1600mm, Y = 400mm, Z = 415 mm. In addition, we still have a smaller machining center with 8 tools for drilling and thread to M 12 in steel. Quantity Spectrum 1 to 1,000. A CNC lathe is equipped with an automatically operating portal charging system for chuck parts up to max. Diameter of 120 mm and a maximum weight of 5 kg set.Here we can also realize larger batch sizes. For painting, we have a small spray booth. Can we have a customer, such as galvanized surface coating, not solve yourself, we cooperate with reliable partners.

Spiroflex Sp. z o.o., a limited-liability company, started its operations in 1994. It made its first steps in the so-called Mielec Incubator of Entrepreneurship. Since 1997, it has been active in the ‘Euro-Park Mielec’ Special Economic Zone. The Company’s headcount is ca. 80, this being a constantly increasing number. This is so because the well-matched management style has placed the Company, ever since the beginning, at the right track leading to incessant and consistent development. Along with development, we have managed to increase the array of products and services we manufacture and offer. At present, we produce: - smooth, flexible acid-resistant chimney-stack insert systems, designed for disposal of combustion gases from gas/oil-fired heating units; - round/oval-shaped heat-resistant chimney-stack inserts, designed for disposal of combustion gases from appliances solid-fuel-fired units; - enamel stack inserts, designed to exhaust flue gases from boilers fired by solid fuels as coal and eco-pea; - combustion gas disposal systems for boilers with closed combustion chamber; - external insulated acid/heat-resistant chimney stacks; - hybrid chimney stacks; - flexible aluminium ducts; - ventilating ducts/shapes; - hot air distribution ducts/shapes; - other ventilation system elements (wobblers, zinc-coated couplings, exhaust-hood passages, and the like). Apart from our production-related offer, we invite you to use our services, including: - powder varnishing This service consists in lacquering of metal elements with electrostatic or triboelectric spread of thermo-hardening powder coatings. Using a modern technological line, we paint details, long elements, strips and wires. For the latter two activities, we are the only ones in Poland. - water jet cutting Spiroflex offers water jet cutting technology for cutting each kind of materials up to 150 mm of thickness and any shape. Working area: 7.2m x 2m, maximum height up to 200mm. - laser cutting We provide sheet-metal cutting services using an LVD-made most-recent-generation contour band saw. High performance linear motor delivers high-speed cutting for fast, continuous processing of high quality parts. - sheet-metal bending We bend sheet metal, using a CNC-controlled bending machine or most modern CNC brake press. The maximum length of elements bent are up to 3m long, the sheet being up to 12mm thick as a maximum.

The company: high-tech performance with flexible materials Rubber, Gummi, Gomma, Cautchouc, Caucho... Words from different languages which refer to one of the most fascinating materials in the world, because no other material has a comparable historical importance: from the Mayas and Aztecs to the modern day "High-tech age". Why is rubber of such special importance? Rubber protects, absorbs, erases, decouples, seals, isolates, rubber even saves lives. No material has a comparable spectrum of possibilities for use: from filigrane precision parts for electronic components to the seals for tunnel elements which weigh tons. This flexibility is the basis for an almost immeasurable diversity for problem solutions. That is the world in which we have been successfully active for decades and in which we have acquired our good reputation: our core area of competence is the processing of rubber into moulded parts and bonded parts. We are the reliable and competent partner for all industrial segments from A to Z: from the automobile industry to zoom lens. We accompany you according to the motto "pre-piece. mould. speciality.": from the first idea (that is before the piece = pre-piece) to the mould (mould.) up to the optimal serial production of rubber moulded parts and bonded parts made of rubber, plastics and metal. Your individual and specific demands are in good hands with us. Who are we? We are 50 rubber specialists who realise your ideas and put them into action using the most modern technology and high-quality machines. Our speciality is the development of solutions for your complex problems: tailor-made, individual, in batch sizes of 1 piece to several million pieces, with a weight of less than 1 gram to several kilograms. With us, you keep pace with the quick technical developments with their continuously increasing demands for rubber moulded parts and rubber bonded parts. We continuously invest in production machines and testing facilities, in the qualification of our employees, in the improvement of the production processes. The essential measure of our company strategy is the optimal coordination of individual components to each other with the goal of a "zero error philosophy". We trust in a high-tech future: The material rubber is an essential part of this. We are convinced and fascinated: We will take you to the world of flexible materials!

Lohmann is the specialist for sliding elements, bearings and clutch technology. We always offer tailor-made solutions to more than competitive prices. Our customers especially appreciate our product quality, our efficient service and our absolute delivery reliability.

Yacht Constructions is a modern company based in Goszyn (Gdańsk), whose basic premise is to provide the customer with the highest possible quality of services and ensure their satisfaction. To achieve these goals, we systematically develop our business by adding new proposals to our offer. We have specialized in the production of ship construction elements and various yacht equipment, but we also use our experience gained in this area in other ways, e.g. B. water jet cutting or repairing yachts. We are constantly expanding our skills and expanding our machine park, thanks to which we can implement technically demanding, very complicated and unusual orders. and atypical orders.

Steel construction Mayr - heating and energy technology is an owner-operated family business based in the Bavarian Tagmersheim. The company has since its founding in 1978, mainly with modern heating technology. The continuous development of devices is guaranteed by the company owner due to his decades of experience itself. It is always taken to ensure that innovative ideas and the latest technologies used in the development. The workforce amounts to approximately 10 employees who manufacture the heating elements in high quality because of their many years of experience. This experience in the heating and energy technology, excellent quality of products and the "Made in Germany" is highly appreciated by our customers.