Watch

    Jebens GmbH
    Jebens GmbH is one of Europe's leading gas cutting works and trading houses for plate with his own mechanical processing and manufacturing of complete welding components. We stock and supply ------------------------- Plates and slabs of steel S235, S355, high-strength fine grain structural steels (S690QL, S960QL), pressure vessel steels (P265, P355, P460), wear fine grain steels (Dillidur 325, 400 Dillidur, Dillidur 500) and 16MnCr5 and C45 We manufacture for you --------------------- In our total of 11 gas cutting equipment (Oxy + plasma) we burn parts of 10 - 1000mm thickness and can handle up to 50 tons unit weight In addition to its own paint shop and 2 sand blasting machines we have our own heat treatment for stress relieving and normalizing sheets Our milling and drilling rigs allow a complete mechanical processing As part of our components manufacture, we manufacture complete welded structures with up to 40,000 kg per piece Our customers ----------------- We supply customers in almost all of Europe. Our customers are mainly in the fields of crane manufacturers, construction machinery, injection molding machines, presses, special vehicle construction and general engineering.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1950
    Certifications
    DIN 18800-7:20
    Dear Sirs and Madams, You need a custom-made product or a product according to your ideas, then you are right with us. We weld, engrave and manufacture for you! Thanks to the automation, we are able to guarantee you a fast and high-quality production process. For our clientele we design precise and high quality products. We guarantee good and clean workmanship. Stormo d.o.o. is a company with many years of tradition and experience in assembly, installation and manufacturing in the metal industry. Below we will briefly mention our activities that we offer in metal processing. Our company has been working successfully for several years on the processing of alluminium, inox and iron plates. Whether single piece or mass production, we will meet your needs in any case. Our activities: - Gas & sanitary engineering - Heating & ventilation technology - craft of metal technology for metal and mechanical engineering - electrical installations - welding - All kinds of industrial installations 1. Assembly and disassembly 2. Machine connection and robotization 3. Various work in the auto industry, printing houses and other metal industries 4. Home installations and industrial installations 5. Pipe work and Wig welding in the auto industry and refineries We produce almost all sectors in which iron, stainless steel, inox & aluminum are used and are active in the following areas: 1. LASER Iron plates: up to 20mm Inox: up to 10mm Alu: up to 8mm The maximum dimensions are: 3m x 1.5m 2. CNC MACHINING For the processing of the materials we use a very high quality device of the brand HACO. We offer bends up to 3000mm. The maximum pressure is 135 tons. 3. DRAWING We have in-house designers or draftsmen and we also gladly help you develop new designs. 4. WELDING Our welders weld for our customers TIG, MIG-MAG and REL. 5. POLISH All our products can be extra polished according to the customer's request. We advise and work with you to find the best solution for you and, depending on your needs, we also take care of pre-production and delivery for you. Challenge us!
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2017
    Certifications
    Active since 1949, the Ing. Bertolotti & C. is specialized in the production of: - For mechanical and electronic instruments avioniva (60% of the business), we have advanced equipment and qualified personnel for the machining and welding of the chassis, cabinets, boxes, structures made of aluminum alloys and stainless steels used in avionics, electromechanical and electronic systems for the defense. - Details of carpentry and mechanics for machine tools, automation, and construction equipment, food industry and food, boating (40% of the business). The large fleet allows us to range between different production processes such as machining (CNC milling with Cad-Cam), cold forming of sheet metal and tubes (bending, rolling, calendering), the electric arc welding (TIG, MIG, MAG), using these processes for the realization of various products and applications. The Ing. Bertolotti provides custom solutions to its customers by creating special items, prototypes, small and medium series. We are able to cover all stages of the production process, from development and design support, to final implementation. We supply finished parts include mechanical surface finish complying with various standards, including military ones (painting, blasting and shot peening, plating and chemical processes such as Alodine 1200, heat treatment) and mechanical assembly of inserts and aeronautical rivets.
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    1949
    Certifications
    ISO 9001:2008
    We are your supplier and outsourcing partner in South Eastern Europe. PIMS ELECTRIC OPREMA doo is established in 2009 as a small company with 5 employees. Today we finished with 40 employees on a production area of ​​2200 m2 switching - and control cabinets, assemblies of metal and electrical assemblies. We process 700 tons of tin annually and supply approximately 70,000 hours annually to our customers. About 90% of sales are made in Germany. Our staff are well trained and highly motivated to provide optimal products for our customers to Koenen. Our company has an ISO 9001: 2008 Certificate. Our customers appreciate: - Cost advantages of the location of Bosnia and Herzegovina - On time deliveries - Flexibility and quality orientation - Dedicated staff with responsibility
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    2009
    Certifications
    ISO 9001:2015

    Watch

    Rowinox
    Rowinox, Metal Engineering In All Facets Welcome to the site of Rowinox, a small company, but with a great passion for metal! You can contact us for the delivery of a wide variety of products / services. We carry out various metalwork in-house, other techniques are transferred by us to other parties. This way we can deliver a complete product from A to Z. You only want to have something welded, or only drawings, which is no problem of course.
    > Go to profile
    Employees
    < 5
    Year of foundation
    2020
    Certifications
    Our company was founded in June 2014. and from the very beginning we set ourselves high goals. Thanks to precision of the elements made, we managed to gain significant customers who represent the producers machines for the food industry, laboratory equipment, automotive. As a result of this cooperation, in We have expanded our machinery park and employment in a short time, and we currently employ 20 people. Our employees represent highly qualified staff that will cope with any task. We specialize in single, short-series production, which is why we put a lot of emphasis on training employees. From May 2018. we changed the headquarters of the company, which allowed us to increase production capacity, and what a This includes the production of elements in multi-series production.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2014
    Certifications
    ISO 9001:2015
    SC THAERON SRL was established on 01.09.2001. The main task here was designed, turning and milling parts and welded structures, partially controlled CNC manufacture. We are equipped with contacts with foundries and forges, with which we complement our product range. The mechanical work is then carried out in our home. Small -., And medium series of under 1,000 to 200,000 pieces yearly. 95% of Processed materials are steel, S235 JR, S355 JR and C45 or 3% stainless steels, V2A (1.4301) 2% Hardox and special grades. Our latest machines belong a DMG CTX 310 BJ 2012, driven tools, turning, milling, drilling, all with a voltage. Weldments 5,000 KG Our product range extends from commercial vehicle engineering, mechanical engineering to mining. We offer our parts raw as well as primed, KTL coated, galvanized or powder coated to. Certified management systems SR EN ISO 9001:2008 SR EN ISO 14001:2005 SC THAERON SRL provides 95% of products exported to Western Europe, and has weekly deliveries so that we can respond to customer wishes and flexibil cause RentabilitatChanged delivery.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    09/2001
    Certifications
    ISO 9001:2008

    Watch

    bit GmbH
    Looking for a manufacturing company for individual solutions? You have come to the right place! We design, manufacture and install steel structures of all kinds according to your requirements in crude, galvanized or painted version - with now more than 90 years experience in steel construction, we are able to meet the highest demands and to find solutions for your individual requests. Our qualification in accordance with EN 1090-2 Execution Class EXC3 forms the basis for a regular and requisite quality execution of all work in a correspondingly wide range of applications. Our company production processes and well-developed cooperative relationships enable the realization of a variety of different product requirements. We like to meet new challenges - so ask us! LOTZ PLANT - Your competent partner for - Steel structures of all kinds (EXC3) - Indoor and container construction - Special and individual constructions - Construction of data centers
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1999
    Certifications
    DIN EN 1090
    Medium-sized enterprises Specialized in professional sheet metal working - Laser sheet blanks - Blechabkantantungen - Mechanical machining
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2007
    Certifications
    DIN EN 1090
    Company KADING gathers experienced engineers who have developed their skills on projects which have required multi-disciplinary knowledge (mechanics, hydraulic, etc.) Our competences: Engineering services: - conceptual product development - 2D/3D product design - reversible engineering - optimization of products and manufacturing processes - calculations and FEM analysis, - preparation of production documents (technical drawings, technologies) - creation of related documents/documents for users (spare parts catalogs, operating and maintenance instructions) - preparation of documentation for product certifications - product visualization (rendering) We are providing services with licensed CAD software SolidWorks (2 Premium + 2 Standard) and Solid EDGE 2019, with the possibility of EPDM integration (total 4 SW PDM Professional licenses). Our engineers also are familiar with other CAD systems (CREO, CATIA, Inventor) so we are also able to support you in that area, dependable on the project and its duration. Manufacturing & prototyping: Together with our partners, we are also offering the following services: - Milling & Turning - Welding (MIG / TIG) - Cutting (plasma / laser / waterjet) - Bending - Punching - Assembling (mechanical / hose / welded) - 5 axis milling We have successfully implemented a quality management system according to ISO 9001:2015 into our business processes which shows our dedication to providing quality and best possible services to our clients. We are inviting you that you allow us to present our services and we wish that your company becomes part of our satisfied customers.
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2013
    Certifications
    In our, in 2000 newly opened modern requirements of production and rehabilitation justice to the workplace, we produce under the expert guidance of qualified engineers, foremen and skilled workers in two buildings with more than 200 disabled and non-disabled employees for the industry in the areas of: - Industrial and electrical installation - Metal processing - Plastic manufacturing and processing - Packaging and packaging Our services are in accordance with § 55 SchwbG creditable against the countervailing charge with 50% of net job performance.
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    1992
    Certifications
    ISO 9001:2008
    CNC turning, diameter from 400 to 1500mm length CNC milling X760y380z500 Translation by Google Translate
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2011
    Certifications
    RABACSA METALLTECHNIK Tradition and quality for over 100 years! Our family is concerned since the mid-nineteenth century, with the traditional blacksmithing. Since the launch of our ancestors already the seventh generation working in this sector. In 1998, the family was placed in a limited liability company with the company name "Rabacsa". Our work covers the techniques of the past, which have proven themselves for a long time and of course the latest technical applications that are based on the latest achievements, from. In the newly built production hall, the conditions for efficient production are given. We have sufficient production and storage space to both large and small orders to be processed. How Been far, we are and will always be on the cutting edge of technology in metal processing. Our company motto is - all made of metal.The four worlds in "Rabacsa" are - traditional blacksmithing, moon long steel products, design pieces of Corten steel and industrial metal processing. These are just words, and therefore we offer - contact us - we will gladly inform you comprehensively. We would wish your ideas and to being part their implementation. Of course you our sales consultants are personally for large presentations and free offers. Thank you for your interest! Balázs Racker Racker and Csaba Managing Director
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1998
    Certifications
    DIN EN 1090
    Locksmith; Production of tools, production aids and small batches
    > Go to profile
    Employees
    < 5
    Year of foundation
    2019
    Certifications

    Watch

    Schigan GmbH
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2002
    Certifications
    DIN EN ISO 3834
    Rampinelli has been working since 1913 in the Industrial sector with Clients from all over the world, specializing in the field of contract manufacturing, with one constant guiding mission – achieve our Clients maximum satisfaction. The main sectors we serve are: • Automotive Industry • Sheet Metal Forming Industry • Energy Industry • Iron and Steel Industries • Chemical and Pharmaceutical Industries • Construction Industry (drilling/piling rigs, earth moving machines) Rampinelli is specialized in the field of custom construction of mid and large size components that require high quality standards. The services we provide our Clients include: • Engineering & Consulting • Mid-large size Fabrication • Mechanical Machining • Construction of Machinery & Equipment • Revamping & Regeneration • Installation and Maintenance services • Special Projects Rampinelli is organized in the following internal divisions, working jointly to provide our Clients the best possible service: • Cutting/Preparation • Fabrication • Welding • Cladding • Mechanical Machining • Coating • Assembly • Maintenance Services
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1913
    Certifications
    DIN EN ISO 3834
    About Us: With years of experience in manufacturing high quality metal parts of President Friedrich Baumann was founded on 01.01.1995 per metal. The company grew continuously since then in sales and employees. Today the company employs 40 full-time employees who focus on one thing: Your PRODUCT - as if it were a part of us! Here are working professionals for professionals - side by side. Our administration: competent - flexible - fast - slim - available Our design / AV: We work with CAD-CAM programs. Entrust us with DXF files, STEP and SolidWorks data They have complex parts? Let us think for themselves! Our production: optimized for fast throughput without idle times (KANBAN); with high precision and a wide range of production lot size from 1-1000 ... Our Quality: For us quality is a continuous process of improvement Quality management according to DIN ISO 9001 Our Services: Some of our customers waive inspection of incoming goods. We also provide initial samples for direct use in the assembly department Our suppliers: guarantee us a high and flexible material availability Your benefit: What do you have of working with us? Looking for a supplier who offers you more than cheap prices? Someone who ... ... quickly reacts and thinks, ... making the case for your product ... and is interested in a long-term relationship? Then you are at the right per metal Achern. We offer a customer-supplier relationship a family-run medium-sized company. You have to deal with challenges? Let's tackle this together. We control each job in a tremendous amount of know-how. This will benefit you. With us, the customer gets everything from one source. From a simple sheet blank, about creating a complex assembly to the construction of a finished machine. For this purpose, a high degree of flexibility. Our team carries with it full. we are a contract manufacturing operation in industrial sheet metal work and laser cutting, punching, edge, weld, round, paint, plating, coating, assemble individual components as well as complete system elements. eg: Chip disposal systems, cabinets, etc.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1995
    Certifications
    ISO 9001:2008
    We are an owner-managed company, the engineering services, manufacturing, finishing, assembly and product delivery offers everything from a single source. This concerns both the wage and foreign manufacturing and the manufacturing our own special equipment for the paper and paperboard manufacturing industry as well as special solutions for safety-relevant area. With our security products, we are also the owner of many national and international patents. Our machinery is constantly being renewed and the education and training of our highly qualified staff are constantly adapted to customer requirements. The high degree of vertical in almost all of the processing steps to make us a reliable A suppliers. Benefit also from the high Hennig and comprehensive know-how. Flexible and perfectly tailored to your needs. Our CNC milling machines can sizes up to 3600 x 2200 mm 5-axis milling process at the Round Table has 500 mm. The rotary department has combined rotary milling machines with Y axis and driven tools and sub spindle. Sheet metal working medium format and folding up to 3000 mm. Powder coating 3000 x 1200 x 2000 mm unit weight up to 1000 Kg Final inspection with Zeiss measuring machine Accura
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1986
    Certifications
    DIN 18800-7:20
    Our family business was founded in 1991. In addition to the locksmith, we have built a second pillar - We act as suppliers to the industry in a variety of industries. This area leads our son, Christoph Mueller, who has completed an apprenticeship as a toolmaker and a training to be a mechanical engineer. Our services include: CAD design: Processing of customer-specific files such as DXF, DWG, etc. Milling and CNC milling: Dimensions 600 x 400 x 400 mm Rotate: Ø 200 mm, length 500 mm Drilling and tapping on a stand and magnetic drilling machines Welding: The following welding processes are used: TIG, MIG, MAG, electric welding Production on precise hole welding tables Electrochemical pickling, polishing and signing
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    1991
    Certifications
    DIN 18800-7:20
    We are a young company that provides its employees with semi-finished products of steel and stainless steel to buyers in Germany. The company already for 7 years successfully provides machining parts and weldments to Germany. We have 3 tested TIG welder and a MIG / MAG welding. The team is complemented by an additional 4 Adjuster. Through the weekly shipment to Germany with our own vehicles, we are very flexible and deliver just in time. For our production we have modern welding machines and other machinery for metalworking (lathe, pipe bending machine and machining centers) If required, we like to come to you and be free to discuss your needs. regards Team Edna doo
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2009
    Certifications
    ISO 9001:2015
    We are an innovative medium-sized company and work for various industries industry and craft. We are active in these areas: • Gear • Construction • Special machines • Stage Technology • crane • Mould (prefabrication) • Tool (prefabrication) • Hoists • Outdoor Advertising • Aufzugbau • Staircase • Geländerbau • Fencing • gates • Balconies and much more We deal with: • CNC Milling • CNC turning • Flame cutting • Weldments • Cutting Service • Plate Milling • Keyseating and encounter • Stainless steel work We cooperate with renowned partner companies from the region that galvanize us, galvanize, harden, glow, radiate, powder coat or paint. Simply ask. We offer everything from one source. Quality welding to DIN 18800-7 Manufacturer qualification class E (large Schweißnachweiß) Separate welding engineer Own delivery service We currently employ 10 staff full and part-time. Derr company was founded in 1961 under the name A. and R. Reeb.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1961
    Certifications
    ISO 9001:2015

    Watch

    TeWe GmbH
    The Mechanical workshop Wunderlich GmbH was founded in 1985. The focus of the company are in the areas of CNC metal processing, welding, punching, bending and forming. In 2008 the company was taken over by the current managing director Jürgen Flaig and - with the aim to achieve further specialization Grade - modernized rapidly. The production capacity of the company, the technical equipment and the demands on qualified employees grew steadily since then - step by step, year after year. Today one finds a modern manufacturing facility in the industrial area of ​​Selb, only 2km away from the driveway to the A93. Our customers are located in very different industries and find us versatile and competent contact for metalworking. We are able to manufacture a very wide range of products able, ranging from one-off prototypes or replacement parts to high volume series production. We are particularly strong in the milling of large components on envelope, within the tolerance range of + / - 0.001. So workpieces of up to 4.000kg are workable on our horizontal milling machine. By now, we are in a position on our state of the art fully automatic circular saw for aluminum profiles of all types and solid material to cut highly accurate and reliable process and edit. Some technical details: • CNC-controlled machining of turned parts up to a diameter of 920mm and a length von1.050mm axially and radially driven tools offer the possibility of finishing in a single setup. • Conventional turning complex parts up to a diameter of 1.020mm and a length of 3,000 mm. • CNC-controlled processing of milled parts: a 40-tool magazine and reduction of non-productive time allowed an enormous rapid traverse rate, input power 40kw and spindle taper SK50 size. • Conventional milling of complex parts or small series. • CNC-controlled machining of large milling parts: 5-axis horizontal milling machine, machining of workpieces of up to 4.000kg in a single setup, tolerance + / - 0.001 mm, spindle power 63kW, pulling force of 2,000 kg axles, spindle taper SK50. • Pull grooves or grooves evacuate to a hub length of 350mm and a groove width of 42mm. • PLC controlled sawing aluminum: our state of the art fully automatic circular saw for aluminum combines the speed and cycle times of common pneumatic saws with the precision and accuracy of cut of a hydraulic system. Continuously variable speed, 15kw drive for stable average values ​​even with aluminum solid material up to 115mm. • Mechanical eccentric presses up to 250 tons and hydraulic presses also to 250t, which are suitable for a muted die cushion also for deep drawing. • Various welding jobs for steel, stainless steel and aluminum for TIG and MAG. • hall crane for parts of weldments up to 8 tons. • Also strong we are in the turning of small parts as well as in laser cutting and bending. • Our partners assist us in processing with the following method: Galvanic zinc coatings of any kind, pickling, hot-dip galvanizing, painting and powder coating, nickel plating, tin plating, chrome plating, Hartaufchromen, Maßhartaufchromen, plasma and gas nitriding, carburizing and vacuum hardening. The company is certified according to ISO 9001:2008. Worldwide, our products are used, which requires high level of responsibility and quality. A goal that we face every day.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1985
    Certifications
    ISO 9001:2008
    For over 25 years we have manufactured as a supplier in our ever-growing family-owned company among other things, for the energy industry. With more than 100 employees, we are working on the latest CNC machining centers in 3-shift operation. Our strengths lie in a very modern, efficient machinery of various forms and highly qualified personnel. In order to qualitatively finished to the highest standard, we have installed a comprehensive quality management and let us 9001:2000 certified in accordance with DIN EN ISO. Particularly noteworthy is the expansion of our machinery in January 2010 at a turning-milling drilling machining center of Niles Simmons (N40MC) with a turning diameter of 920 mm and a nominal rotation length of 4500 mm. Of course, going through every product made our exit control, so that the highest quality is assured. After request also weld tests, Umstemplungsbescheinigungen, material certificates, test records, etc. canis provided upon delivery. Thus we can guarantee consistent quality assurance within our value chain. Due to the extensive quality management in conjunction with our high performance machinery and the high manufacturing know-how of our team we can assure strict adherence to deadlines with the highest quality at good conditions. We are happy to invite you into our production, so that you can convince yourself of our strengths.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1984
    Certifications
    ISO 9001:2015
    The company Pichorner metal technology GmbH is a specialized supplier of half parts for the manufacturing industry. The focus of the production is in series welding parts.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2001
    Certifications
    DIN EN 1090
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2000
    Certifications
    DIN EN 1090

    Watch

    Nardini SPA
    We have been creating production lines since 1952 working on bitumen and waterproofing membranes. We have also been producing turned and machined parts as per drawing specification since our early beginnings. We are a bespoke Mechanical Engineering at your service. We customize our work with your business, to match your drawings and other requirements. We select the best way to achieve the mechanical parts that customers commission. The company manages the production cycle efficiently, regardless of the amount of pieces it needs to produce. Attention to detail is one of our secrets and we manufacture pieces that will be part of mechanical units and will be integrated into the assembly to exact specification. Over fifty years of presence on the market have allowed us to build a solid background of experience, complemented by the continuous desire to improve our services, and offer a valid partner.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1952
    Certifications
    ISO 9001:2015
    FUP sp. z o.o. was established in 1994 and has since continued to develop dynamically. FUP employs over 100 highly-qualified persons. FUP manufactures parts and assemblies for machines and equipment, as well as complete machines. With our state-of-the-art machines, we are able to manufacture most complex machine components for the most demanding customers. FUP cooperates with many companies in the machine building industry from Poland, Germany, France, Switzerland and the USA. Over 90 percent of our products are exported. Our flexibility in planning and manufacturing enables us to promptly respond to our customer enquiries. Our highly-qualified specialists execute customer orders in a timely and professional manner..
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1996
    Certifications
    ISO 9001:2015
    VAS-GmbH was founded in 2001 and the main fields of activity are machining / welding on the one hand and vacuum technology on the other. In order to satisfy customers through quality, adherence to delivery dates and prices in line with the market, we have introduced a lean, non-certified QM system, use a powerful inventory management system and have acquired modern machinery. We have also established a branch in Bosnia at our headquarters. Furthermore, plants and plant modules can be designed, constructed, manufactured and put into operation according to customer specifications. Our staff has grown to around 35 employees, including 4 engineers, and we use CAD_Cam software for designing and programming. We are also always ready to go unconventional ways, to make prototypes or to develop or improve and help to design components according to manufacturing-specific criteria.
    > Go to profile
    Employees
    Year of foundation
    Certifications
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1980
    Certifications
    DIN EN ISO 3834
    As an up-and-coming steel and sheet metal processing company, GB is known for fairness, speed and delivery reliability. The aim is to further improve the quality, efficiency and reliability of production through constant further development.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2017
    Certifications
    ISO 9001:2015
mehr anzeigen