RIEMER + TIMMANN ROHRLEITUNGSBAU GMBH has existed since 1984 with currently 20 employees. The company is headquartered in 22145 Braak near Hamburg. We offer you: Delivery, assembly on construction sites and prefabrication in our factory in Braak In addition to assembly, we provide the complete delivery of pipe materials, holders, welding consumables and welding gases throughout Germany and abroad. We produce as many components as possible in our workshop according to your specifications. • TIG orbital welding technology We guarantee you the highest quality for all tasks in stainless steel piping and plant engineering. The use of computer-aided TIG orbital welding technology in thin-walled areas is our specialty. • Endoscopy and documentation In accordance with the FDA's GMP guidelines, we are able to document virtually any weld seam photographically using our own video endoscope and store it digitally on data carriers. Our pipeline installations focus on: • Stainless steel piping for: - pharmaceutical, biotechnology and chemical companies - breweries and dairies - Food and food companies • Prefabrication and unit piping - Ultra-high temperature systems (including test and pilot plants) - CIP systems - short-term heating systems (including sterile and aseptic), - separator systems (including sterile and aseptic systems), - Complete valve nodes, coupling panels, pipe fences - Prefabrication of plant parts and assemblies for outdoor installations • Piping of complete large refrigeration systems for: - Cold storage warehouses and distribution centers - breweries and dairies - slaughterhouses and sausage factories - ice cream factories • General industrial pipeline construction - energy pipes (e.g. steam, condensate, water, etc.) Tools and approvals • Tools required for our construction sites • TIG welding machines • TIG orbital pipe welding machines (closed GTAW system) for the highest demands from 9.5 to 114 mm for the pharmaceutical sector (affected by the product). • TIG orbital pipe welding machines (open system) for Cr-Ni welds DN 15 to DN 150 • Tungsten electrode sharpeners • Residual oxygen meters • Two own video endoscopes (endoscope length 9.6 m) with digital image memory • Fischer Ferritscop ferrite content meter including printer, fully mobile • Weld seam documentation using a photo printout or digitally • Welding engineer for welding supervision and advice • Process tests in accordance with TRB 200 /AD fact sheet HP2/1

JOBO Spezial-Maschinen GmbH was founded in 2012 at the Vechta location. A manufacturing facility with an associated office building was built here in 2015. As a young company, JOBO would like to establish itself as a manufacturer of machines for the national and international market in the near future. Particular attention should be paid to the optimization of existing and the development of new concepts for machines for use in swamp or moorland areas. In addition, JOBO will deal with systems and equipment for the oil field industry, pipeline laying and controlled drilling technology. JOBO will work out the customer-specific special solutions that are often required here together with the respective customers. JOBO's range is supplemented by the areas of procurement and trading of equipment and devices from the above-mentioned segments on the international market. JOBO employees with the necessary experience in the respective specialist areas are available to implement all of these tasks and goals. In the future, JOBO will continue to supplement and expand the workforce with competent employees. JOBO hopes to be able to offer young people an apprenticeship position in the future

DS-Technic designs, builds, programs and commissions workstations and production lines. We also offer modification, modernization and service of existing machines and implementation of new types of products on existing lines. We have our own tool shop equipped with the latest equipment and a laboratory equipped with a precise 3D measuring machine. Thanks to them, we produce parts for the devices we design as well as elements for customers, both on the basis of the documentation provided and use of reverse engineering. We encourage you to establish cooperation in the field of not only designing and manufacturing entire production lines, but also making elements that require milling, die-sinking EDM and welding. We undertake to make details both in single and prototype production, for e.g. inaccessible spare parts for machines, or serial production regardless of the degree of complexity. We also offer CMM measurements of finished parts. We offer special solutions, tailored strictly to the requirements of customers, developed through deep technological analysis, and then creating a solution concept which evolves in close cooperation with the client. This approach ensures achievement of contractual goals. We have extensive experience in cooperation with renowned companies, mainly from the automotive industry, but not only. We offer the following services: • CNC milling, • Turning • Grinding • Die-sinking EDM, • Welding • CMM and optical measurements. Machinery: DMG CNC milling centers: DMU 1150V: 3-axis with working area 1150x700x550 [mm] DMU70 eVolution: 5-axis with travel 750x600x520 [mm]. Die-sink EDM SODICK AG60L with the possibility of machining a workpiece with dimensions of 950x740x450 [mm] Conventional lathes with machinability (dia.x length) 450 x 1500 [mm] Surface grinder with dimension max. 200x600 [mm] Roller grinder (dia.x length) 250 x1100 [mm] Hole grinder (dia.x length) 200 x200 [mm] MIG/MAG/TIG welding We provide high quality of workmanship thanks to our own measurement laboratory, equipped with: • Mitutoyo Crysta Apex V9106 – 3D coordinate measuring machine – measuring range 900 x 1000 x 600 mm • Mitutoyo QUICK-SCOPE QS-L 3017Z – vision measuring system • Mitutoyo HR-320MS – stationary hardness tester • Mitutoyo SJ-411 Portable Roughness Tester, equipped with touch screen and integrated printer • Mitutoyo LH-600E digital altimeter • Mitutoyo granite slab class 00 dimensions:2000x1000x220 [mm] • Mitutoyo sets: diameters, micrometers, reference plates, depth gauges, sensors, digital calipers We encourage you to send inquiries to the produkcja@ds-technic.com address. We guarantee quality and punctuality. Website: www.ds-technic.com We will be grateful for the opportunity to present our services more widely at your headquarters. If you have any questions, don't hesitate to contact us directly.

Since 2019, our company has been producing components according to customer requirements. Predominantly these are welded constructions with or without machining and surface treatment.

We are a renowned Slovenian engineering company in the field of mechanical engineering. We deal with manufacturing and assembling machine components services and we also provide mechanical design services, all in the field of structural steel, stainless steel, aluminium and plastics. We are present in various sectors of the industry across Europe. As a family owned company we have been a professional partner for already 20 years between Slovenian manufacturing companies and European customers (Austria, Germany, Switzerland and Denmark), for whom we manufacture custom-made products in Slovenia. With our qualified experts we ensure correct technical production, planning, quality and timely order execution. Our advantage is that you as our customer have only one business partner who covers the entire Slovenian market for products ranging from 0.1 kg up to 50 tons. We also guarantee a timely delivery of your orders and the quality which are essential for long-term partnerships. As a modern company our goal is to meet the needs and wishes of our customers to the best of our abilities. TECHNICAL POSSIBILITIES Material: Metal, INOX, aluminium, brass, casting, plastic, etc. Cutting: Mechanical cutting, flame cutting, plasma cutting, laser cutting Welding: Steel, INOX, aluminium Maximum weight: 50 t Turning: CNC machines up to: Ø = 1000, L = 6000 mm CNC carousels up to: Ø = 6800 mm Milling CNC horizontal milling machines up to: x = 10000 mm, y = 4000 mm CNC vertical milling machines up to: x = 2000 mm, y = 1000 mm CNC portal milling machines up to: x = 15000 mm, y = 5500 mm, z = 4000 mm Eroding (EDM) Wire and spark erosion Grinding Plane grinding machines up to: x = 3000 mm‚ y = 1500 mm Round grinding machines (inside or outside) up to: Ø = 400 mm, L = 4000 mm Surface treatment Sandblasting, painting, galvanising, nickel plating, anodising, black oxidising, nitriding, hardening, etc. Quality control Quality measuring with special tools and 3D measuring machines Assembly of machined components From component machining to component assembly with 3D measurement protocols. Transport We can arrange the transport of ordered items from Slovenia to your company.

As a leading machine and metal construction company, we offer our customers a comprehensive range of metal processing services. Here we present just a few of our impressive services and are convinced that you will be amazed by our high quality and professional competence. We are also certified according to DIN EN 1090 EXC2. Contact us at any time if you have any questions or need an individual solution for your project. We work closely with you to make your ideas a reality laser cutting Material: Material thickness: Steel 10-12mm Stainless steel 5-6mm Aluminum 3-4mm edging Material: Material thickness at 3100mm HL Steel 45N/mm² 8mm Stainless steel 70N/mm² 5mm sheet cutting Material: Material thickness at 3000mm HL Steel 45N/mm² 6mm Stainless steel 70N/mm² 4mm bar cutting max. cross-section: rod length: 320x180mm 6000mm Bending sheet metal Steel 3mm max. 1200mm HL round/ring bending Dimensions: D: 42.4mm D: 33.7mm Square & square tube pipe grinding Dimensions: D: 20mm D: 25mm D: 30mm D: 40mm D: 42.4mm D: 50mm D: 65mm D: 76mm welding MAG and TIG

Precision in metal FormaMetall is your partner in plant, device and apparatus construction. Our customers come from the energy, chemical, automotive, mining and mechanical engineering industries and rely on partners with in-depth industry know-how. We offer a high degree of flexibility so that even individually manufactured solutions can be implemented within a short period of time. This at a consistently high level - both technically and in terms of craftsmanship. FormaMetall leaves nothing to chance and creates the ideal basis for successful projects with a qualified team and modern technology. For more than 20 years, we have been producing sophisticated components made of structural steels, stainless steel, special materials and non-ferrous metals for national and international customers. Are you looking for an experienced, reliable partner? Take advantage of our competence and experience in sheet metal processing, welding technology, pipeline construction, as well as custom-made products in individual parts and series. Since 2019 we can also offer you components or functional prototypes in 3D print production. Our material selection includes plastics and metal materials. The plastics sector, for example, offers extremely high strength levels that are higher than that of aluminum. Thanks to the wide selection, almost any design concept can be implemented.

The family business Schüttler Technik has been active in industrial sheet metal forming and apparatus engineering for more than 40 years. With around 85 employees, we create all conceivable products for our customers - innovative, skilled, and always with the highest quality. Demands and technology in today's sheet metal forming sector are constantly changing, while quality standards continue to rise. Our entire industry is caught up in a rapid development process. Schüttler Technik is always willing to face these dynamic challenges head on, and make the most of these new technical opportunities. Since Schüttler Technik was founded, we have always relied on state-of-the-art technology. Our great willingness to innovate has paid off. Especially for our customers, who can always access a portfolio of services which always keeps up with the times.

We specialise in producing food industry process assemblies as well as any product that has to do with stainless steel. We have the ability to provide the following services in house : - Sheet metal laser cutting. - Tube & Pipe laser cutting. - CNC Bending of sheet metal and profiles. - CNC Milling ( 4 Axis ) - Manual Turning. - Parts bead blasting & Brushing. - TIG, MIG, Laser & press welding. - Orbital Welding. We outsource the following : - Powder coating. - Anodizing. - Galvanizing.

Our production is located in Croatia and partially in Bosnia and Herzegovina. - Laser metal cutting, bending, metal stamping, welding, grinding, galvanizing, and powder coating all in one place. We have a team of innovative mechanical engineers who are not only capable of producing your product, but also developing new products according to your needs and individual desires. Thanks to our expertise and experience, we are always ready to offer new and creative products for Your business. Our team has over 20 years of experience in processing all types of metals. Our production expertise has set standards in the industry, leading to long-term relationships with numerous business partners in Germany (such as EACC, Hurter, Haußler, Sana Klinik, etc.) and the rest of Europe. If you need support in developing an idea, drawings , or sample production, feel free to contact us. Equipment in our production includes: 1. Bodor 3kw Laser 2019 2. Bodor 6kw Laser 2022 Cutting: -Steel 20mm -Stainless steel 10mm -Aluminum 10mm 3. Euromac Punchmachine Cutting thickness 2mm 3. Vimercati press brake 3000mm 80 tons 4. Durma press brake 2000mm 60 tons 4. Mig/mag welding for steel and aluminum 5. Tig welding for steel, aluminum and stainless steel 6. Spot welding for steel and stainless steel (not for aluminum) 7. Sheet cutting machine for thickness up to 5mm 8. Powder coating ITW Gema 9. 2x Eccentric presses 30 tons 10. 2x Hydraulic press 25 tons

Re-discover steel at PETRI! Our story began in 1874 with the establishment of a trade company for steel. Crises, wars and economic miracles led to many highs and lows. But - then as it is now - working with metals is our unbroken passion. Customer focus and flexibility have always distinguished Gustav Petri & Co over the years. In the 80s, our focus shifted to the machine processing of metals. Modern machinery was setup gradually, with which we meet the high demands of our clients every day. Gustav Petri & Co. is now managed by the 3rd generation, Mr. Johannes Huber. Many well-known clients of the industry and trade see in him and in his capable team, a reliable, flexible and solution-oriented partner. In recent years, we have managed to add another pillar to our business with the development and production of storage systems for wood pellets. By consistently developing these and other proprietary products, we see the possibility of demonstrating our expertise and quality far beyond the borders of Austria.

Multivalve sp. z o.o. is a manufacturer of industrial valves. The company was founded in 2005 and is located in the Katowice Special Economic Zone in Gliwice. The qualified staff, accumulated experience and the implementation of the latest production techniques enable us to offer our customers products and services at a high level of quality. Experience allows us to manufacture our products based on our own technical documentation, but we can also produce on the basis of technical documentation prepared by the customer. We ask for technical advice when selecting valves, devices and technical solutions in industry. We deliver our products to both domestic and international markets.

The company Willy Müller GmbH Co. can look back on almost 75 years of successful activity in mechanical and apparatus engineering, starting with a small workshop for wrought iron and welded constructions up to special constructions in the interaction of the production areas mechanical processing and sheet metal processing, e.g. combination torches, flaps , E-filter parts. Our focus: - Load suspension devices: Here the production from the standard crossbeam to the special lifting device for the Machine transport - Furnace construction: oil, gas and coal dust burners (also combined) and their components such as Standby lances, nozzles, swirl chambers (also in armored versions) etc. - Rail vehicles: supply parts for trams, subways and IC trains such as B. door bearings, door locks, striking plates, bolts of all kinds (also hardened and nickel-plated), fastening elements, housing covers, brackets, handlebars, tie rods and the like.vam (total volume approx. 1,000 different parts) - Expansion joints: metal expansion joints (preferably rectangular) of approx. 300 x 300 mm left. W. to compensators for DENOX systems with edge lengths greater than 20,000 mm in steel and stainless steel (also heat-resistant), max. Unit weight so far: approx. 33 t Companies like Mitsubishi Hitachi, Bilfinger, Siemens, EON, RWE trust as long-term customers the quality of our work. What started as a one-man operation in 1945 has developed into a company with 30 employees within two generations. We produce with a modern machine park and have a wide range of offers and so we can say with a little pride: "A strong team works miracles" and MADE IN GERMANY

Dear ladies and gentlemen, As an expert in the field of the metal industry, we would like to present our services to you. With over 15 years of experience, we support companies such as our subsidiary Raumsysteme Grob. We produce around 1500 containers per year. Companies like yours are also in the process of solving goals or problems and achieving long-term success. Our company is characterized by our high quality, which enables us to offer our customers according to your wishes, quickly and always to the point. Our services include: welding technology, punching, laser cutting, edge bending and folding, CNC turning, CNC milling, powder coating and industrial painting. We would be happy to explain to you more about our services and their specific benefits for your company in a personal conversation. We cordially invite you to contact us to make an appointment. We look forward to working with you and contributing to your success. sincerely

Mey Maschinenbau Prien has been designing, producing and optimizing precision mechanical OEM products for a wide range of industries for more than 50 years. Our team of more than 200 employees will implement your ideas at our three facilities. Our headquarters are in Prien am Chiemsee, while our other production facilities are in Nyúl and Győr in Hungary. This allows us to achieve an optimum cost mix, optimize the manufacturing of your product and pass the potential savings straight on to you. We always strive to act personally, conscientiously and flexibly, whether we are working with our clients or amongst our colleagues. These values guide our way of working and the resulting quality is reflected in your products.

Innovation in sheet metal production Martech GmbH specializes in sheet metal parts and complex welded structures in chrome steel, aluminum and steel with certified welders according to SN EN 287-1 / 9606-2 / DIN 3834 with its own welding engineer Our own engineering has the most modern 3D CAD systems to efficiently process customer needs, our services range up to the strength calculations of the components. Small parts of a few millimeters and material thicknesses of 0.2 - 30mm up to large constructions of max. 6.3 tons - lot sizes from 1 to thousands Thanks to our modern machine park (automated combination machine TruMatic 7000, latest flat laser technology Trumpf FIBER 5040 6kW 4 x 2 m automatically connected to the sheet metal storage and a Bystronic water jet system 3 x 1.5 m) and our sheet metal storage with up to 1,200 tons of sheet metal (stainless steel, aluminum and Steel in all qualities) we guarantee the shortest delivery times. Many long-standing customers from all areas of industry, pharmaceuticals, medical, defense, aviation, food technology, machine and vehicle construction are convinced of our services, high quality and competitive prices. Processing options: - Flat laser 4x2m - Combined processing 3x1.5m - laser welding - bend up to 4m and 320 to - Profile milling machine up to 3.5m - 3D CAD systems - Press-in fixture HAEGER Laser engraving machine - water jet system - pre-assembly - assembly production - prototype construction - series production - Surface treatments with partner companies

Your competent partner in sheet metal processing Automated lasering, edging and laser welding  High flexibility, even with short-term inquiries  Reliable customer service: from the offer through production to delivery  Inexpensive production of medium and large series with constant high quality  A young team that gives you competent advice 24/7

Laser cutting sheet metal and profiles, welding work, steel, stainless steel, aluminium

Lindner metal is a medium-sized company from the Erzgebirge. Our main focus is the production and distribution of stairs and railings. For swimming pool equipment, industrial applications and welded constructions but also for pipe bending, bends and small batch production, we are the right partner for you. From construction to modern CAD workstations to production in different areas of production, to delivery and professional installation guarantee you our 30 employees a high quality in the execution of your orders. Due to the close relationship with our customers we ensure the continuous development of our products. We are a member of Warenzeichenverband 'STAINLESS STEEL Stainless' and possess the certification according to DIN EN 1090 EXC2 for the materials S235 to S355 and stainless steels.

ProcCon ... ... Is active in environmental and operates new developments and projects for the gas station area, including manhole covers, manholes, Fernfüllschächte, special manhole covers and other special solutions according to length. The products are manufactured according to the requirements of the Water Resources Act. ProcCon ... Operates ... joint venture projects as subcontractors in general machine construction, steel engineering, plant engineering, sheet metal work, piping, fixture and special machinery. In the sales order steel structures, machine frames, welded parts, air ducts and machine elements are manufactured (Including industrial platforms, industrial pallets, welding frames, kiln cars, bunk car, butterfly valves, louver dampers,). ProcCon ... ... provides engineering services for your Untenehmen, among other things, project management, development and construction 3D/2D (SolidWorks, AutoCad) in machine and plant engineering. Prototyping, prototype, create manufacturing and assembly drawings, detailing, bill of materials Products: Prototype of a descaling; prototypes cleaning hoods for sheet cleaning, assembly of a spindle; assembly cars, machinery elements, oven and dryer cars, platforms, pipelines, production range: wheel block; storage tank / filter; Framework; dryer baskets, pallets, throttle / Blinds; pipes / ducts, manhole covers; manhole remediation;

> Go to profile