1888 Suppliers found
List
Raster
Map
Sorted by 
    Wolfensberger AG

    We offer a wide range of services: It includes about 100 steel and cast iron materials, two casting processes - sand casting and investment casting - as well as the pre-finished machining in-house.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1924
    Certifications
    EN 15085
    OMG Messieri Spa

    We are among the most important suppliers of products for the first use, mainly intended for manufacturers of tractors and heavy vehicles sector. Our production is based on the processing of components in full supply of steel,cast iron and raw with the primary objective of meeting the needs and expectations of the customer, through a continuous improvement of the product and supply systems, applying inside the 'Company Total Quality’. OMG has developed steadily over time its technical and industrial capacity and is the undisputed leader in the production of customer-specific: Axle shaft Transmission shaft Planet carrier boxes Wheel axles Exhaust manifolds Differential boxes Splined shafts Front and rear wheel hubs Reduction casing box Steering control levers PTO Casing Brake piston Steering knuckle PTO Shaft Wheel forks Flession bars OMG is today on the market as a supplier able to offer not only work, but a complete service that can start from the purchase of raw materials and ends with the supply of machined and assembled units. Production processes related to OMG machining are: Turning Teeth /Hobbing Milling Drilling Boring / Reaming Broaching Grinding Induction Hardening Threatment Mechanical assembly Washing I normally processed materials are: cast iron, steel.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1926
    Certifications
    ISO 9001:2008
    AWEBA Werkzeugbau GmbH Aue

    We specialize in the manufacture of complex components of the tooling and engineering, typically in the lot size "one" and even small lots & prototypes. We are equipped with machinery that covers the entire process chain of such components. From the pre-and soft processing, about the hardships in the area of the tool and machine typical types of steel, extends to the finish in air-conditioned rooms, our machinery. Machining Centers / Drilling / milling from DMG / DMU and Hermle, Roeder HSC milling, turning / lathe Mori Seiki and Okuma, grinders grinding / Jig Grinding by Hauser, Kellenberger, and the young and the EDM / DEM Wire EDM / EDM SEM from AgieCharmilles and OPS / Ingersoll are installed by us. With 170 machine operators and 120 machines we make about 450,000 per year production hours. We manufacture plates, frames, stamp guide plates, molded frames, moldings, 3D-shaped parts, guide plates, stripper, stripper plates and precision parts such as stamps, molds up to a size of 2000 x 1700, 3D parts up to 1700 x 1400, turned parts up to diameter 650 x 1000 In-house hardening, coatings (PVD, TiN, TiCN, CrN, WCC) in cooperation. The materials we specialize in tool steels, high alloy steels (1.2379, 1.2343 ESR, 1.2344, 1.2311, 1.2312, 1.3343, Divar) powder metallurgy steels, PM steels (CPM, ASP, Vanadis VAN, REX, Hotvar) as well as hard metal carbide ( G10, G20, G30, K10, K20, K40, H40S).
    > Read more
    Employees
    200 - 500
    Year of foundation
    1882
    Certifications
    ISO 9001:2008
    Achgelis Schweisstechnik

    The Achgelis Schweisstechnik company was founded in 2000 by Bernd Achgelis and has been continuously expanded. Achgelis welding technology focuses on contract welding, the creation of welding assemblies and special welding constructions. Bernd Achgelis also advises and trains in all welding processes used. The necessary technology and accessories can be bought and rented from Achgelis Schweisstechnik. In order to get an impression of the welding equipment as well as of the automated solutions, they are used in the operation of Achgelis welding technology on a production area of 850 m².
    > Read more
    Employees
    5 - 10
    Year of foundation
    2000
    Certifications
    DIN EN ISO 3834
    TP Suche Banner
    CNCLAB doo

    The company CNC LAB Ltd. is active in metalworking. The main activity of the company is the mechanical processing of metals for single, small and serial production with CNC machining centers. We process light metals such as aluminum, copper, brass, plastics, etc. CNC LAB Ltd. is a high quality company that can fulfill all the expectations and wishes of customers. We are only a short time on the market. The company was founded in June 2016. with only one machine, the HAAS Miling Machine VM-3. Now, in 2019. due to the investments, first of all, in new production technologies, in less than three years we are working with 8. new HAAS CNC machines and a team of 30. employees, 8 of whom have a high degree of education and qualification.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2016
    Certifications
    ISO 9001:2015
    Jonda Metallwarenfabrik GmbH

    Develops Jonda metal goods factory GmbH develops, produces and markets since 1954 Sheet metal and metal components for various industries. Covering an area of ​​2500 m², we use the most modern manufacturing methods customized products and assemblies. In our own tooling we manufacture stamping and forming tools for use on our stamping plants. In the field of CNC sheet metal processing, we offer all standard manufacturing processes including the robotic laser welding.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1954
    Certifications
    DIN EN ISO 3834
    TRE DI SNC

    TRE DI Snc was born as a small business in 1979, and has grown simultaneously with the development of the North-East, where personal initiative, ideas and the spirit of work are not lacking. The activity of this company is identified in the production of turned small metal parts built according to drawings or samples supplied by customers. TRE DI specializes in the processing of metals, aluminum, steel and brass and, thanks to the complete fleet of traditional and CNC machines and the use of highly qualified personnel, is able to create special components, prototypes, turned and milled parts of series. The company was therefore structured in such a way as to be able to completely manage the development of a new product through the use of its services by following this production process:  Product conception according to customer directives;  Realization of equipment and prototype;  Custom production.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1979
    Certifications
    BMK Bodensee Metall AG

    The modern and efficient CNC machine park and highly qualified employees are the backbone of our mechanical production of precision parts. We process all standard engineering steels steels, tool and special steels and stainless materials. Furthermore, "can" we. In aluminum, ferrous metals and plastics We carry a private, well-stocked material warehouse. This allows us at any time to quickly access. In the spirit of complete delivery, we have a network of competent suppliers surface treatments and finishes, and can therefore provide the customer with ready-precision parts. The availability of various mechanical machining processes such as turning, drilling and milling we can also manufacture a wide variety of mechanical parts and the client assembled supply ready for installation as module. We are specialized in medium batch sizes with lead times up to four working days.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1975
    Certifications
    Himpe AG

    As medium-sized family we are already over 50 years Specialist for individual solutions in instrumentation and testing and our instruments are used around the world. Our flat, flexible structures we have to work in a position even special requests efficiently. This enables us to specifically develop our products. If it matters, for liquid vapor and gaseous media in pipelines and containers temperature, pressure, level and flow rate to be measured, is the Himpe AG for over 65 years one of the leading suppliers of primary measuring devices for individual process solutions. Our product portfolio includes a wide variety of instruments for plant construction. Our focus is on installation elements for temperature, pressure, level and flow measurement. Around our products we also offer all related services, the production upstream and downstream of, and assembly parts. Another, outsourced service area is our department "wage drilling" offer we as other services also independent of production.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1948
    Certifications
    ISO 9001:2015
    Metaalwarenfabriek Latenstein B.V.

    The Metaalwarenfabriek Latenstein BV was founded in 1947 and has since developed into a specialist in metal forming. The manufacture of stamping, drawing and pressing parts and assemblies is now one of our core business. Our main customers are about 80% of the automotive industry and their suppliers, as well as household appliances and furniture, plumbing and construction industry. With currently 110 employees, we manufacture parts according to drawings or specifications to approximately 11,000 square meters of production area. Our production facilities, in addition to the deformation on mechanical and hydraulic presses with progressive or transfer dies to a force of 630 tons, also include the component manufacturing such as welding, riveting, assembling and surface coatings. We also specialize in metal-plastic composites. The materials we process all common types of steel as well as non-ferrous materials up to a thickness of 8 mm from coil or sheet material.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1947
    Certifications
    ISO 9001:2008
    PRECI-TECH ENGINEERING SERVICES

    Preci-Tech Engineering Services”supplying high precision machined parts from bar stock, casting, forgings, sheet metal, fabrication & press parts, plastic & rubber parts, sub-assemblies etc. Presently we are supplying parts to EUROPEAN customers in Italy, Germany ,Switzerland, Bulgaria. We also export to USA & Dubai , Australia. We are supplying precision machined parts & sub-assemblies to our prestigious European Customers: 1) Pack Sys Global (Switzerland) Ltd., Switzerland - Packaging machine manufacturer 2) Bruckner Group, Germany.- Packaging machine manufacturer 3) Bottero S.P.A. - Italy I.S. Machine Manufacturer 4) Wendt Maschinenbau GmbH - Germany - Precision parts & assembly manufacturers. 5) Drujba Glassworks Plovdiv- Bulgaria - Glass Bottle Manufacturers 6) Nemo Building Systems (Nautilus Group, Inc.) – USA- Manufacturers of modular buildings 07) Mahindra Defence Naval Systems Pvt Ltd.- Manufacturers of Defense Equipment's. Our services are tailored to your requirements, whether you are looking for standard or customized engineered products.We manufacture parts as per International quality standards, by using advance technologies, Latest cnc machines, Measuring equipments, Excellent quality raw materials tested in Laboratory Advance Heat Treatment & Surface Treatment processes., We give best services to our customers in terms of – Low Cost, Less Delivery Period & International Quality.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2010
    Certifications
    ISO 9001:2015
    Thommen Maschinenbau AG

    Our core competence lies in the machining and the design and implementation of special bodies or custom Weldments and production outsourcing customers. If you wish, we will even cover the procurement of materials, surface treatments or any other manufacturing processes for you. Our Services Turning CNC and Conventional Milling CNC and Conventional Keyway poking Plane Mechanical Engineering Welding (MIG / MAG, TIG, TIG, electrodes) Edges, warping, burning Painting Special arrangements 4-axis controlled boring machine OERLIKON Machining Center MAZAK (with tilting table) 5-axis machining center REIDEN BFR 23 (integrated rotary table and A + B axis) Turning to 8000 mm tip diameter and 1500 mm passage
    > Read more
    Employees
    10 - 20
    Year of foundation
    1946
    Certifications
    GHI.MEC. S.R.L.

    Machine works with lathe, machining center and CNC sliding heads. The workshop GHI.MEC., located in Jerago con Orago (Italy), is specialised in machining and precision metal working. Through the use of modern technologies and with a young technical staff, dymanic and highly specilised, we are able to fullfill all the needs related to precision mechanics, mechanical machining of small parts and complex components, ensuring maximum availability and customer satisfaction. The production processes tied to precision mechanics are handled through the use of CAD/CAM software and technologically advanced CNC machines in order to provide contract manifacturing with high precision mechanical parts of alloy steels, stainless steels, aluminium and its alloys: copper, brass, bronze and plastics (teflon, pvc, nylon, peek, etc.) GHI.MEC. is therefore able to meet the needs of all industrial sectors. Product quality and timely delivery are the ket points of our business.
    > Read more
    Employees
    5 - 10
    Year of foundation
    2012
    Certifications
    Rasit Balet - Just in Time Präzisio...

    Welcome to Just in Time precision parts Our company is working for many companies from different industries. With over 10 years experience and modern machines, we are your partner with expertise and high quality standards. With our extensive range of machinery and skilled professionals we produce individual parts, prototypes and small series of one piece to thousands of pieces. Together with our external partners, we provide you with a delivery from raw through to hardened or surface-coated part from one source. Just in Time For precision parts customer service means to offer as a production and service company in every respect what we expect from our suppliers. The only way to build a foundation for a trusting relationship. Our services are: Short reaction times Meaningful Offers Reasonable price / performance ratio Advice to our clients in the design of Products in terms of economic production. Consistent high level of quality Exact deadlines Our production processes are very flexible. When necessary, our staff is ready to use on weekends. This puts us in a position to ensure a timely output with almost zero error tolerance. Just come to us - we stand by our word!
    > Read more
    Employees
    < 5
    Year of foundation
    2002
    Certifications
    Starkom, proizvodnja in trgovina d....

    We are a company with competencies in the field of sheet metal forming, welding, assembly and painting. Technology We have manufacturing know-how in the following procedures: Forming and pressing from steel and aluminum sheet metal parts Bending of steel and stainless steel tubes Rail welding of steel, stainless steel and aluminum with robots and special technologies (master-slave, etc.) Spot welding of steel parts Surface treatment and surface protection - KTL coating, top coating, waxing of the components Mounting - rubber bearings press in, screw with torque monitoring, Einrollieren of ball joints Quality On the engineering and metrological sector STARKOM has all the necessary facilities of a quality capable automotive supplier. Qualified employees are the basis of the quality philosophy. They are actively involved in the design of quality assurance processes. The focus of the efforts of the STARKOM are quality and efficiency. Fixed quality objectives and the principle of worker self-control are essential components therefor. To ensure the quality is a STARKOM: 3 D measuring machine - for dimensional inspection Weld lab with electronic touch-screen documentation
    > Read more
    Employees
    100 - 200
    Year of foundation
    2005
    Certifications
    ISO 9001:2008
    TP Suche Banner
    Shining Jins Enterprise Co., Ltd.

    Shining Jins Enterprise Co., Ltd. engaged in manufacturing and supply precision, high quality cold forged and machined parts to numerous markets in Taiwan. Our production capacity :- General industrial applications forging and cold-forming metal parts Seamless Pipe series products and polygon cutting machining process Various thread forming and rolling machining Automobile and Motorcycle cold forging parts Headed rivet, plug bolt and pin for casters Shafts & special-headed metal parts Custom made cold forged fasteners Cold forging loud-Speaker parts Forged and Turned metal parts Forged Fitting Adapters Roller and collar pipe Engineering component Power Tools parts SHINING JINS ENTERPRISE CO., LTD. No.107, Lane 530, Sec. 1, Guoji Road., Taoyuan Dist., Taoyuan City 330, Taiwan. Tel: +886-3-361 0638 Fax: +886-3-367 7527 Web: http://www.shiningjins.com E-mail: sales1@shiningjins.com Loud-speaker,pole piece,t-yoke,u-yoke,cone,grille,voice coil,spider,dust cap,basket,surround,diaphragm,tags,magnet,frame, woofer,washer,pole plate,speaker metal parts,bottom,casters rivet,Pins,Washer,Screws,Nuts,Bolts,Castors, Rivet,forging,forged,CNC,gear,forge,tube,Pipe Nipple,spacer,rivet,washer,Screws,Bolt,axle,pin,forming,tapping,speaker,yoke,flange,Shafts,bits,t-yoke,pot,bush,Fastener,boss,rod,Camshaft Bushing, Plunger Barrel Sprocket axle,bushes,nut,Furniture fittings,Shoulder Screw,Suspension Bushings,screw fittings,Bushings and Sleeves
    > Read more
    Employees
    50 - 100
    Year of foundation
    1975
    Certifications
    ISO 9001:2015
    KWM Karl Weisshaar Ing. GmbH Prozes...

    KWM WEISSHAAR Sheet metal process chain As a leading, modern and innovative companies in the metal and sheet metal processing, we are a team of over 500 employees in more than 30 years, a respected partner of many well-known customers. We supply almost all significant industries, such as the printing press, the automobile industry, the rail vehicle or general engineering. With our five fields of engineering, sheet metal processing, joining and welding, assembly and logistics, we are across the entire process chain of sheet metal processing across the all-rounder and problem solvers when it comes to sheet metal. Engineering The Engineering Division is divided into the areas of order processing center, design, prototyping (experimental / prototype) as well as tool and fixture. Sheet metal processing KWM WEISSHAAR disclosed as part of the machinery, the entire bandwidth, which requires a modern sheet metal work systematically from. Add & Welding Laser welding Robot welding / linear welding Bolzen-/Punktschweißen Manual welding Stick Rivet Assembly Refrigeration and air conditioning equipment installation Major Appliances Installation Electrical installation Surface Technology Others Logistics The objective of the logistics area is an optimum supply of production and our customers. Business With our five divisions, we are across the entire process chain of sheet metal processing across the all-rounder and problem solvers when it comes to sheet metal. This alignment is one of the reasons for its continued growth. In addition, a consistent customer focus and courage, very early to decide on the use of new technologies. This is always the customer benefits, which is expressed by time, quality and cost benefits. A recipe for success of the company is certainly also the successful approach to every customer by a project manager.The customer has the motto "One face to the customer" always the same contact person. Founded in 1979, today has over 500 employees of the largest suppliers in the field of sheet metal forming and processing. KWM WEISSHAAR produced with advanced machinery and equipment as well as a professionally well qualified and motivated staff. The product range of the business unit "sheet metal processing" includes high-quality products for almost all industries. The business was founded in 1997 "Design & Development" also offers advice and support of the idea through the design, construction, tool development and prototyping to series production. Sheet metal working "under one roof" is our understanding of professional service and partnership. What we stand for \ We offer our customers the best possible solutions in terms of production processes and methods. \ We cater to the individual needs of our customers. Thanks to the proactive thinking and action, we are helping to improve products and reduce costs. \ We offer our customers as partners in a relationship products and services at competitive prices. With our know-how and flexibility, we will fully meet the high quality requirements of our customers. \ Through our ideas for the realization of tasks, hard and effective work as well as high reliability, we win the trust of our customers.
    > Read more
    Employees
    500 - 1000
    Year of foundation
    1979
    Certifications
    DIN EN ISO 3834
    Stormo d.o.o.

    Dear Sirs and Madams, You need a custom-made product or a product according to your ideas, then you are right with us. We weld, engrave and manufacture for you! Thanks to the automation, we are able to guarantee you a fast and high-quality production process. For our clientele we design precise and high quality products. We guarantee good and clean workmanship. Stormo d.o.o. is a company with many years of tradition and experience in assembly, installation and manufacturing in the metal industry. Below we will briefly mention our activities that we offer in metal processing. Our company has been working successfully for several years on the processing of alluminium, inox and iron plates. Whether single piece or mass production, we will meet your needs in any case. Our activities: - Gas & sanitary engineering - Heating & ventilation technology - craft of metal technology for metal and mechanical engineering - electrical installations - welding - All kinds of industrial installations 1. Assembly and disassembly 2. Machine connection and robotization 3. Various work in the auto industry, printing houses and other metal industries 4. Home installations and industrial installations 5. Pipe work and Wig welding in the auto industry and refineries We produce almost all sectors in which iron, stainless steel, inox & aluminum are used and are active in the following areas: 1. LASER Iron plates: up to 20mm Inox: up to 10mm Alu: up to 8mm The maximum dimensions are: 3m x 1.5m 2. CNC MACHINING For the processing of the materials we use a very high quality device of the brand HACO. We offer bends up to 3000mm. The maximum pressure is 135 tons. 3. DRAWING We have in-house designers or draftsmen and we also gladly help you develop new designs. 4. WELDING Our welders weld for our customers TIG, MIG-MAG and REL. 5. POLISH All our products can be extra polished according to the customer's request. We advise and work with you to find the best solution for you and, depending on your needs, we also take care of pre-production and delivery for you. Challenge us!
    > Read more
    Employees
    50 - 100
    Year of foundation
    2017
    Certifications
    DANNE Holding GmbH & Co. KG

    DAMA manufacture of sheet metal blanks for more than 35 years by autogenous Flame cutting and plasma cutting from 15 to 150 [300] mm. The high-quality standard is determined by the use of sheet metal and slab ensured from Germany and other Western European countries. Mill scale and cut edges with larger components by plastering Rays away. Small parts are tumbled. Custom flatness tolerances through the use of the 500 t Straightening press guaranteed. Danne For over 20 years, sheet metal blanks [steel, stainless steel & aluminum] be the 2D laser cutting produced. For production are 8 laser system in Large format 1.5 x 3.0 m and 2.0 x 6.0 m format available. In addition to the laser systems is also a CNC punch for the Sheet Metal -., And Processing. Depending on customer requirements components may also be blasted. Further processing is done with CNC controlled Abkanntpressen up to a Length of 6.8 m. ASK manufacture of welded structures [MIG, MAG, TIG, welding of Hand or robot] according to customer drawings, including a mechanical Machining [5 axes]. In addition to the various welding methods are also different welding processes such as robotic welding available. The production ranges from number 1 to more than 1,000 St.. Also, the unit weight for components in the field of mechanical engineering exceeds 4 t. For details, see company presentation and / or power spectrum
    > Read more
    Employees
    100 - 200
    Year of foundation
    Certifications
    DIN EN ISO 3834
    Calorifer Engineering AG

    As a leading manufacturer of equipment and systems in the process and heat technology, we are focused on customized solutions and specialized in high-quality welded construction. With our team of engineers, process and production specialists, we manufacture in our factories in Elgg (near Zurich) and Oberuzwil (near St. Gallen). After more than 50 years of experience in the production of industrial heat exchangers, we have expanded our expertise as a systems provider and have a machine park, which is also used for contract manufacturing. Committed to quality and in possession of important national and international approvals, we deliver our products and installations around the globe. * Plate heat exchanger heat exchanger * Sterile * pressure gas cooler * Druckgaserhitzer * finned tube Register * Register * smooth tube shell and tube heat exchanger * oil cooler *
    > Read more
    Employees
    50 - 100
    Year of foundation
    1951
    Certifications
    ISO 9001:2008
    Circle GmbH Engineering Solutions

    We manufacture according to customer requirements from item to complex assemblies for various industries such as automotive, medical, optical, aviation, engineering or consumer. We process a wide range of metal and plastic varieties. If necessary external services we can rely on a long-standing and reliable partner master, the coordination takes our project management. Our quality assurance ensures that you receive only what suits your needs. In our manufacturing in Limburg 15 employees are currently active. Translation by Google Translate
    > Read more
    Employees
    20 - 50
    Year of foundation
    1998
    Certifications
    ISO 9001:2008
    Ibrahimovic PJ Production

    Company Ibrahimović d.o.o. with business unit IBRAHIMOVIĆ PJ PRODUCTION deals with milling of light metals (aluminum and its alloy, copper, brass), as well as steel from which it produces parts for machines and equipment used in the automotive and pharmaceutical industries, we are offering also surface protection parts (anodizing process, zincing process and galvanizing), steel welding process. In parallel with the production of parts, we educate employees on a daily basis in order to be able to respond to all market demands applying international quality standards. Taking into account that we are a company that started operating in November 2018 with two new CNC milling machines HAAS VF6.Now we have in our machine park a total of 3 CNC milling machines and circular saw equipment for increasing competitiveness on the market. In near feuture we will get our milling 5-axis machine with wich we want to our product get more quality, faster and for offering wider service in our company. Considering that, we are opened for long time jobs. From our service assortment we can offer and organize the service of transport and delivery of products as well as services: -modeling -programming The maximum dimensions of the pieces we can process are : X = 2000mm Y = 780mm Z = 600mm
    > Read more
    Employees
    10 - 20
    Year of foundation
    2018
    Certifications
    ISO 9001:2015
    Reber GmbH

    Water jet cutting is a separation method for almost all materials. Here, a focused jet of water at high pressure is shot (3,600 bar) from a nozzle onto the material to be cut. To improve the cutting performance of the water an abrasive medium (garnet) is added. The beam thus acts as a thin blade, but without heating the cutting edge. The course of the sectional contour is determined by the latest CNC control. Waterjet cutting is therefore an extremely versatile environmentally friendly cold cutting process. It can be easily cut materials such as the following: Metal and metal alloys for example, steel, stainless steel, aluminum, copper, brass Composite and Structural Materials for example, aluminum composites, laminates, fiberglass Glass, stone, ceramic eg glass, wired glass, laminated and bullet-proof glass, marble, granite, ceramics, tiles Natural materials as natural and laminated wood, cork, leather, rubber Plastics for example, fiber reinforced plastics, acrylic glass, foams
    > Read more
    Employees
    10 - 20
    Year of foundation
    1981
    Certifications
    Proton GmbH

    WELCOME Since 1.07.2010 manufactures the Proton GmbH as an independent company, with a dedicated base of employees, machined components as a subcontractor in the areas of: equipment, fixtures, injection molds and stamping dies. Based on extensive know-how and long-standing customer relationships supplies the proton GmbH customers worldwide. On 01.07.2010 the proton GmbH moved into its new premises in Kißlegg in the industrial park at the station. COMPANY The proton GmbH specializes in the production of equipment for industrial production. From the construction, and parts production to finished facility, as well as plastic processing all common manufacturing processes are covered with different materials. These services range from simple processing to co-development of system components, production systems and manufacturing processes. Our customers are companies of various industries such as electrical engineering, mechanical engineering, tooling, special purpose machinery, plastic industry, food, medical, construction, etc. With precise technology and the many editing options proton GmbH, guarantees an experienced and qualified team of employees with a comprehensive processing from a single source. MACHINERY CAD: 4x SolidWorks 2011 CAM: 12 jobs 2.5 - 3D milling and wire cutting Saw 5x turning up to 250x1000mm 10x milling up to 1000x660x600mm 1x Milling 5 triaxial diameter up to 650 Hardening 4x flat grinding up to 800x400 2x cylindrical grinding, to 250x400 Jig Grinding Die sinking Hole EDM Wire cutting 3D measuring machine 500x600x400mm 3D printing in ABS and various colors 3x injection molding to 250t clamping force Screw press Tox 4-column press type MAG 80kN Hydraul
    > Read more
    Employees
    20 - 50
    Year of foundation
    2010
    Certifications
    Jianfeng Precision Hardware Manufac...

    Being ISO 9001:2000 certified in 2002,Jianfeng Precision Hardware Manufacturer is a manufacturer for precision metal and plastic components to customized specification with casting, machining, milling, drilling, grinding, turning and stamping of different fininshing, such as silver plating, golden plating, zinc-nickel plating, chrome plating, powder coating, anodizing, painting and heat treat. We have a team of customized solution for your precision components project from engineering design to production, and delivery and we have found three subsidiaries: Jianfeng Precision factory, Jianfeng Casting factory, Jianfeng Stamping and coiling factory .Our efficient technicient and adequate machinery enable us to satisfy your quick turnover order and one source with your complecated project since we have lost-wax casting metal processing ,CNC turning processing, to Stamping and coiling. We have also invested heavily in measuring equipments and quality management to produce consistently, meeting the specification and have developed a culture of “ sustaining improvement “ throughout the company .We can apply PPAP under customers requests. We are driving with our AIMS--effective cost quality products, on-time delivery ,timely and effecient communication,We believe we can be your trusty partner ! JianFeng precision factory Established in 1995, specializes in various precision metal parts, relying on automatic lathes, CNC lathes,machining center, cylindrical grinding machine imported from Japan and Taiwan. The products include mini motor axis, brass couplings, brass base, and all sorts of turning parts that are widely used in the manufacture of computer, electric appliances,automobile, communication equipment,lock,LED aluminum crust and electric toys etc…the materials are brass, aluminum, POM,carbon steel and stainless steel,ect. JianFeng casting factory Established in 1997 , offering a complete service since we have over 15 years casting experience .We had provides investment castings for a wide range of industries, including commercial equipment, automotive, defense, firearms, sporting goods, hand and power tools, medical equipment and architectural hardware. Casting sizes ranging from.2mm-500mm, Rough to finish-machined. Materials handled include stainless steel, iron, aluminum. JianFeng stamping and coiling factory Established in 1998,custom manufacturer of stampings ,springs. Specializing in quantities from 25 to 25,000 pieces per run. Material thicknesses from 0.005 in. to 0.375 in.. Blank size capacity unlimited. Capabilities include wire cutting Drilling, tapping, sinking, welding, deburring & assembly are done in-house. We’ve provided stamped components and srpings to electronics industrial, automotive, medical, electronics appliance markets.
    > Read more
    IWAZ Schweiz

    Discover our attractive range of services Thanks to our modern structures, constantly optimized processes and lean organization, we guarantee fair prices and punctual deliveries of the required quality. We supply different sectors of the industry, the industry and other industries and have established ourselves as a competent and reliable contract manufacturer. Our industry is versatile and covers an above-average range of services. We flexibly process both simple and complex small and large series. As a market-oriented and innovative supplier, we constantly adapt our infrastructure as well as our production and logistics processes to the needs of our customers.
    > Read more
    Employees
    200 - 500
    Year of foundation
    1968
    Certifications
    ISO 9001:2015
    Inoxdea Srl

    INOXDEA is a young family business based in Erbusco (BS), Northern Italy, with a twenty-year experience in stainless steel processing. Ever since its foundation, InoxDea has specialized in products and services destined to the food industry, such as contract manufacturing of machinery and spare parts for sealers, packaging machines and fillers, as well as for the gastronomic, the confectionary and the tinned food industries. INOXDEA can also assemble and deliver preassembled small groups or sub-groups of machines and implants. Our headquarter covers a surface of 3000 m2, thereof 200 m2 occupied by our offices, and has 1750 m2 dedicated to our manufacturing sites. We constantly improving of our production and delivery process, in order to assist our customers in every phase of the production and craft high-quality products. We are equipped for the following realizations according to customers’ requests and designs Steel Processing: • Cutting • Pipe Cutting • Bending / Clinching • WIG und MIG Welding Finishing: • 2B-Sheet • Satined – Scotch–Brite We dedicate our undivided attention to the details of the final product and to our customers’ satisfaction. Thanks to our machine park we are able to realize steel sheets according to Your indications and guarantee the perfect quality. Thanks to our just-in-time (Kanban) principle we are able to minimise the stocking time, guarantee a fast delivery, optimise the production process and consequently reduce the waste. By means of suitable softwares, our quality management and technical office can assist, test and scrupulously follow every product in every phase of the production. REALIZATIONS • Tubular Structures • Filling Funnel/Funnel • Filler • Sealing Machines • Stainless Steel and Scotch Brite Cooling Troughs • Vacuum Pipe Collector • Framing for Multihead Weighers • Electrical Enclosures • Platforms SERVICES • Laser Cutting • Laser Pipe Cutting • Plate Bending • Assembly of P.V.C.- Pipes with relative equipment Our motivated Team works two turns therefore can realize the products with reliability and precision for Our international customers. We are eager to examine Your own projects or models and to submit a concrete offer. In case You need further information or clarification, please do not hesitate to contact us.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2002
    Certifications
    Raytheon Anschütz GmbH

    Raytheon Anschütz GmbH is a manufacturer of high-quality, technologically sophisticated navigation systems for shipping with more than 100 years of experience. Tolerance requirements in the µ range (0.001 - 0.003) are commonplace for us. We would also like to offer this experience as contract manufacturing. Raytheon Anschütz GmbH produces complete assemblies for you as individual workpieces and small series. portfolio: - turning (5-axis) partly automated (robotics) - milling (5-axis) - wire EDM - Means - Circular grinding inside and outside - 3D coordinate measuring machine - 3 D profile measuring system - Assembly electromechanics - wiring - construction - environmental laboratory accompanying processes - Ultrasonic bath - Parts washer - vibratory grinding - sawing via extended workbench - painting - surface (electroplating)
    > Read more
    Employees
    500 - 1000
    Year of foundation
    1905
    Certifications
    ISO 9001:2015
    GERMANI LTD

    PRESENTATION OF "GERMANI" ltd "GERMANI" Ltd is a company founded in 2004 and was for nearly a decade has managed to walk the safe towards realizing its objectives. Currently it possesses a modern technology metal work. Basic machines are CNC-controlled German production and work with CAD-CAM programs. Success is guaranteed with staff specialization in Italy, with the methodology and technical requirements of the European standard metal products such as special furniture, home appliances, industrial equipment, parts for elevators where: doors, cabins, staffing, different chassis, etc., occupy a leading place. "GERMANI" Ltd is organized by specialized departments: 1. Department of elevators "GERMANI-ELEVATOR"; The main task is: production of all range of mechanical elevator. Elevator cabin standard and custom; engine chassis, cabin and counterweight; Every staff for the wall type and shine; elevator door complete with any type of material; etc. Leader in the domestic market and exporter in Kosovo, Macedonia, Montenegro, Italy, etc. 2. Department of metal furniture "GERMANI-MOBMETAL"; Department "GERMANI-MOBMETAL" recently has realized productions in several special projects or productions by order customers. Were typical work being you present the following as possible that our company has in this area. 1. Projects for the collection and recycling of waste (waste bins, containers, recycling units, etc.). 2. Projects for gyms, enterprises, schools, etc. for the production of wardrobes for placing clothing, vehicles or tools. 3 new products in the field of culinary uptake. 4. Telecom cabinets with and without microclimate, accessories and other technical and marketing. 5. Basis of cash registers. 6. Shelves and accessories for markets and supermarkets. 7. Cabin and the elevator doors of all types. 3. Department of Alternative Energy "GERMANI-ENERGY". The main tasks: a. Design, implementation, maintenance, repair of systems for generation of electricity from the sun, wind, biomass, etc., from 300w up to 100 kW and more. b .Sisteme alternative energy for households, businesses, institutions, farms, etc; c .Sisteme independent from the sun or wind, hybrid, combined with a unified network or generating electricity, etc; d .Sisteme street lighting, parks, camping, security facilities, ndicues guide traffic, etc; e. All for alternative energy. Have an idea, project or suggestion, you can discuss with us and it is possible for a new reality. 4. Production Department bitub "GERMANI-BITUB". For details see the www.germanibitub.com The company "GERMANI" possesses a modern technology and complex even for special welding processes of metals and metal hardware. Technology and high qualification of specialist staff - engineer techno- achieved great successes even in other areas of metal: lathe; metal punching press; CNC plasma cutting machine; CNC laser cutting; Shearing machine; electrostatic dying, etc. How can cooperate? 1. You send project - the task and write you back for the possibilities of its implementation. 2. You send a sample and we realize it. Then change the and decide what you are looking for. 3. Direct negotiations for details of cooperation. Hopefully in a serious and long term collaboration, whether match the interests of our businesses. Hope in your message for this collaboration.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2004
    Certifications
    ISO 9001:2015
    Tehmetal d.o.o.

    Our primary scope is development and production of machine tools. Our beginnings date back to 2002 when we started to manufacture components for the tool and engineering industry. According to the needs of the market we soon expanded to include the manufacture of complete tools. In early 2009, we have decided to extend the activity to the development and assembly of the hardware, electrical and other industries in order to able to offer our customers the entire process from the idea to series production of components. Quality of our products is provided in accordance with ISO 9001:2008 What We Offer Toolmaking: We are able to make tools up to the dimensions of 1500×800 mm and weight up to 2000 kg. Design and development: We design tools or machines, as well as produce final and intermediate products, based on the requirements expressed and with the help of CAD technology. Processing of metals: On the CNC machines we can process separate metal parts and series. Semi-finished products: We are able to produce various semi-products from steel, aluminium alloy or plastic.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2002
    Certifications
    ISO 9001:2008
    TP Suche Banner
Limit search by:
Region
Technologies
Materials
Company data
Industries
Certifications
Top categories
CastingSintering