1862 Suppliers found
List
Raster
Map
Sorted by 
Go to watch list 0

    Watch

    MCON Mechanical Construction GmbH

    Company description Looking the whole manufacturing from a single source? Put on the right partner, because it gives you the necessary freedom for your core business. Send us your drawing. We procure materials, rework the parts, ensure the coating and monitor the entire production process until you can use the pre-finished workpiece on time available. Mcon GmbH (Austria) has specialized as a supplier of high-quality production parts. With years of experience in mechanical engineering, we were able to establish ourselves very well in the domestic and European market. Our strengths are high quality associated with punctuality, expertise on our part as well as those of our contractors. With this basis, we like to solve your challenges! OUR SKILLS We put our focus on products that we have been perfecting. In order to offer our customers perfect products, we focus on the following areas of expertise: • Frästeile • Turned parts • weldments Especially in the mechanical engineering, plant engineering, transmission engineering, railway and traffic systems, renewable energy and medical customers appreciate our expertise, as well as the perfectly manufactured products and the fast service. Frästeile: Quantities: Small, medium and large series Dimension: Max. 500 x 1200 mm Material: Steel, stainless steel, nonferrous metals, plastics surface treatment Curing, painting, nitration, anodizing, coating, Brin Irish. Turned parts: Quantities: Small, medium and large series Dimension: Conventional machining: max. D = 220mm Material: Steel, stainless steel, nonferrous metals, plastics Surface treatment: possible in cooperation with long-standing and reliable partners Welding: Quantities: Small series Weight: Max. 3000 kg Material: Steel, stainless steel Welding Types: After method E111, TIG / 141, MIG / 131, MAG135 / 136 Welders have valid certificates according to EN 287/1 Surface treatment: possible in cooperation with long-time partners. Surface treatment: anodizing Chromium Blacking paint galvanize Wärmebechandlung: gas nitriding vacuum hardening are also possible on request quality responsibility "The customer comes back, not the product" So simple and clear aptly is our internal motto. Achieving this does not succeed by means of regulations, but only by really motivated and well trained staff. So is the ultimate goal for us to provide a secure future for employees and company. We intend to achieve by careful and constant growth of the company and by absolute customer satisfaction. Challenge us with your requests!
    > Read more
    Employees
    20 - 50
    Year of foundation
    2011
    Certifications

    Watch

    HSP Schwahlen GmbH

    HSP Schwahlen GmbH was founded in 1945. From on 1951 the production had been focused on adapter and withdrawal sleeves being the basis of our current line. At the beginning of the eighties CNC production of goods having greater dimensions was introduced. HSP supplies all main bearing manufacturers as well as the larger distributors. The standard production range on adapter and withdrawal sleeves, nuts and locking devices is completed by optional hydraulic assistance, abnormal metric inner diameter or complete inch-sized sleeves as well as all specialties based on customer specifications. Besides this we manufacture hydraulic nuts as well as precisely turned and milled thin-walled parts. Since 2000 HSP is also manufacturing various kinds of cages for bearings from 100 - 4000 mm outer diameter in high quality, small lot sizes and variable material (brass, steel, bronze, aluminium, ...) according to customers requirements. In this segment we produce for all main bearing manufacturers. In addition to the production know-how HSP has continuously improved quality, logistics and administration. This leads to the high level of quality, delivery conditions and service of HSP. At our newly built production facility in Langenfeld, established in 2001 and in between extended several times, we manufacture with the latest technology including 3D-measuring equipment. The certification of the quality management system based on DIN EN ISO 9001 and of the environmental management system based on DIN EN ISO 14001 by Lloyd's Register Quality Assurance Limited underlines the endeavour to achieve highest possible precision and satisfaction of our customers as well as the best possible environmental sustainability. HSP product range The HSP production programme covers adapter and withdrawal sleeves, nuts and locking devices with 130 mm up to 3000 mm outer diameter and approx. 600 mm in length. Besides the standard we offer the following: • Sleeves with abnormal bores and threads, metric / inch dimensions, special materials, ... • Production according to customer specification respectively to drawings • Special surface treatment (e.g. phosphating) • Longterm packaging • Direct deliveries, global sourcing and other logistical add ons Standards of the HSP production • Adapter sleeves according to ISO 2982-1:1995 (-> DIN 5415:2009-05) • Withdrawal sleeves acc. to ISO 2982-1:1995 (-> DIN 5416:2009-05) • Nuts following ISO 2982-2:2001 (DIN 981:2009-05) • Locking devices acc. to DIN 5406 • Any standard or recommendation of customers by drawing or text Additional products Cages for bearings with complex milling and drilling processes up to 1750 mm outer diameter processed in five axis. HSP is not limited to any design according to customer requirements. Most ferrous material can be machined (brass, bronze, steel, aluminium, etc.).
    > Read more
    Employees
    50 - 100
    Year of foundation
    1945
    Certifications
    ISO 9001:2008

    Watch

    SEEGER Lasertechnik GmbH

    - Laser cutting of metal sheets and pipes - Quality welding to DIN 18800-7 "B" - Assemblies - Bending and folding - Punching, stamping and pressing parts - Water jet cutting - Laser marking - Vibratory Finishing - NEW + + + laser parts and folding up to 4 m in length Services For customers, we are problem solvers, and partners. - From a simple laser part to complex assemblies we manufacture everything according to customer requirements. Whether from a hand sketch or a DXF file: Together with our clients we find the solution. On short-term supply needs, we respond flexibly and simultaneously meet all quality requirements of our customers. The surfaces we deal with experienced partners. - Laser cutting Steel: 25 mm thick in size 4000 mm x 2000 mm VA: 25 mm thick in size 4000 mm x 2000 mm Aluminium: 15 mm Thickness in the format 4000 mm x 2000 mm - Laser marking VA, aluminum and brass up to a size of 400 mm x 600 mm - Water jet cutting Virtually all materials in the format of 4000 mm x 2000 mm Please queries whether the desired sheet thickness is available in stock. - Bending and folding Steel: 5 mm thickness and 4000 mm length VA: 4 mm thickness and 4000 mm length - Welding All common welding processes such as MIG, MAG or TIG steel and VA
    > Read more
    Employees
    20 - 50
    Year of foundation
    1991
    Certifications
    DIN 18800-7:20

    Watch

    HÄNI + CO. AG

    We produce with the most modern Machines for manufacturing pre-finished turned parts for customers in the automotive, electrical and medical (ISO / TS 16949, ISO 13485, ISO 14001). We process steel, nonferrous metals, aluminum, titanium and plastics, On ... lathes, single spindle, multiple spindle and rotary transfer machines, ... In diameters ranging from 1 to 42mm. For more information see www.hanitec.ch
    > Read more
    Employees
    100 - 200
    Year of foundation
    1939
    Certifications
    ISO 9001:2008
    TP Suche Banner

    Watch

    MUZ GmbH, Metallbearbeitung

    If >>> not - there's not Following this motto we combine for more than 15 years of production engineering for the complete machining sophisticated machine components productivity and flexibility with the help of horizontal machining center to a economic optimum. Our services include turning, drilling and milling of large, complex hydraulic components, Machine parts for large vehicles and special purpose machines. Our strength lies in the consistent use of the latest manufacturing technologies. Even turning operations of cubic parts whose processing have usually been very labor intensive to conventional lathes was, can with us on one of the BAZ through the use of combined Rotary milling are carried out completely in one setting. The hereby achieved increased process safety and significantly reduced tooling and clamping times are Benefits that we like to pass on to our customers. The connection of the BAZ to a FMS pallet rack system with 60 pallets and a total of 940 tools allows us sufficient machine pallets to store retrievable using appropriate clamping technology. Thus we are able at any time to react flexibly to customer demand absolute, even in small quantities. The slim structure of a small enterprise, 25 committed and qualified employees, a manufacturing engineering Organization at the highest level and of course quality "Made by MUZ" are the benefits that our Know how to use in long-term partnership clients. Interested? We see your inquiry on gladly!
    > Read more
    Employees
    20 - 50
    Year of foundation
    1992
    Certifications
    ISO 9001:2008

    Watch

    Böhmler Drehteile GmbH

    We develop and produce for decades Böhmler of precision turned parts, machining parts and assembling contact turned parts for the electronics and automotive industries. Our extensive know-how and our optimal production conditions may enable us to respond flexibly to needs and requirements of our customers. In consequence of this we have specialized in addition to the production on the assembly of miniature and special components. If you wish, we will also bring you our proven long-term project and material experience in the development of your products with a. What requirements do you have? Fast, accurate, flexible, cost-effective, just in time ... ? Try us once, you tell us what you need and we ... ... we rotate exactly your thing! Search Specialists and generalists in one? Looking for a supplier who can fulfill all your wishes? To compete in the national and global competition, we need solutions that meet the complex requirements and the increasing demand for reliability and flexibility.Thanks to the constant improvement of our production we can offer our customers a wide range of precision turned parts. Our products are mainly used in the automotive industry, electrical and control engineering. We supply precision turned parts of 1-32 mm diameter. At over 6,300 square meters of modern production area, we process materials of brass, steel, stainless steel, aluminum, bronze, copper alloys and profile materials. Of course, we have mastered the process for pre-and post-treatment and galvanic finishing On 6300m ² of modern production space we manufacture precision turned parts and contact parts and assembly parts including galvanic finishing and heat treatment for the electronics and automotive industries.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1955
    Certifications
    ISO 9001:2008

    Watch

    Schleicher Fahrzeugteile GmbH & Co. KG

    We are a leading manufacturer of camshafts, pump shafts and shafts of all kinds. We always find a solution for our customers - whether with large marine camshafts or small shafts for medical laboratory systems. Over 70 years of experience and the knowledge and organizational talent of our employees combine materials, machines and production processes in an ideal way to a quality-tested customer wave. In our new sawing center in the Penzberg plant, we custom saw steel rod material up to a diameter of max. 140 mm. Benefit from our experience and simply contact us for the possibilities of production in our house.
    > Read more
    Employees
    200 - 500
    Year of foundation
    1945
    Certifications
    ISO 9001:2015

    Watch

    R. K. Gehäusebau und Blechbearbeitu...

    RK and case production Blechbearbeitungs GmbH is a metal processing plant specializing in sheet metal processing. Your partner for single and series production. We manufacture our products from steel, stainless steel, aluminum or other non-ferrous metal sheets and profiles, among others, with the latest CNC sheet metal and laser technology. On request we deliver our products powder coated in RAL color of your choice. Our staff is composed of highly qualified and motivated employees. Our guiding principle Innovative sheet metal working to perfection through design and process optimization.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1995
    Certifications

    Watch

    Oeschger Mechanik

    Looking for a flexible partner to its rotational parts optimally shopping? - We're here for you! We manufacture turned parts from short to long and complex to simple. In the series size, we will gladly comply with your wishes and produce optimally designed machines from small to large series. Also series sizes from 100,000 to 300,000 pcs are easily possible. You do not want to take care of even after treatment or processing? No problem, we will take care of the entire process chain with our long-term partners. Pre-assembly and warehousing are not part of your core competencies? We are happy to offer you this hand. We are the flexible supplier, partners and service providers close to them! Our strengths are flexibility and the will exactly turning and milling parts to offer you need. Through our broad-based production, we can benefit from a wealth of experience and together with our partners we will find you the best solutions in terms of quality and cost.We gladly offer with construction issues hand and work out a solution with you. Turned parts are no longer the same rotational parts! Here is turned, milled, drilled ... ... And this ... in all kinds of materials ... Thanks to our technological standing on the state of the art machinery are highly complex components no problem ... Here ... we can also roll the threads or keyways and hexagon poking provide hand. The dimensions in which we manufacture range from manufactured on the long-turners very small and / or long turning and milling parts to large parts of diameter 200mm. Do you have the same components that you installed (pre-assembled) want to buy? This work we undertake for you. And for treatments such as annealing, hardening, silver / gold plating, zinc plating, nickel plating, etc. We have reliable partners so that we can offer you everything from one source. • MechWorkshop • Fabricator / decolletage • CNC machining • Multi-axis machining and backs processing • small batches from 100 pcs, Grosserien to 300,000 - pcs or more • Processing: from Ø 3mm - 65mm, from rod (length up to Ø 25/700 - 800mm). • food processing: up to 150mm (length 300mm).
    > Read more
    Employees
    < 5
    Year of foundation
    1996
    Certifications
    ISO 9001:2008

    Watch

    Muermann Gewindetechnik GmbH

    The thread specialist Mürmann offers many years of expertise in the field of threading technology and the production of special screws in many areas of industry. The production of complex parts and special services such as material testing, grinding or thread rolling complete the offer. Modern machinery, innovative process technology and complete process monitoring guarantee maximum reliability and flexibility. Our services: CNC turning CNC milling Hot and cold forming thread rolling grind Hardening Reward any form of surface coating Material tests in the in-house test laboratory With our machine park, we can cost-effectively manufacture from small quantities on cycle turning machines to medium-sized series on state-of-the-art double spindle machines with bar magazine. Need fast action? For your short-term needs, capacities in the machine park are kept free.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1956
    Certifications
    ISO 9001:2015

    Watch

    ISOVOLTA GATEX GmbH

    Custom-Made Solutions for Individual Products In accordance with customer demands and wishes, ISOVOLTA – in addition to manufacturing high-quality laminates in the form of sheets, tubes and rods – also offers processing of thermoset materials. Different materials are shaped by processes such as cutting, grinding, drilling, turning, milling, gluing, mounting, punching, jet cutting or painting according to individual customer specifications. Based on our expertise in material-specific selection and production-technical implementation as well as our years of experience in job shop, serial, and mass production, we are able to develop the best possible process for each product. Range of Materials Phenolic Cellulosic Paper / PFCP Phenolic Cotton Cloth / PFCC Phenolic Glass Cloth / PFGC Melamine Cotton Cloth / MFCC Melamine Hard Glass Cloth / MFGC Epoxy Glass or Glass Roving Cloth / EPGC Epoxy Glass Mat / Polyester Glass Mat / EPGM / UPGM Melamine-Lined Hard Paper / MKHP / INBORD® Silicone Glass Cloth / SIGC Special Laminates / Special Materials / CFRP, KP, PIGC MAGNOVAL® CONT AVAL® GX_11.3309 GWS RP High-Performance Rings GF-UP / GF-EP ISOVAL® R-AL Competence in Soldering Equipment Soldering Frames are primarily used to transport PCBs in soldering machines while simultaneously fixating “through-hole components” by using Top Hat Systems. With our specially developed ESD material, which is able to endure high temperatures and chemical resistance, the ISOVOLTA Soldering Frames are able to withstand thousands of soldering cycles. ISOVOLTA Soldering Frames and masks are custom-made innovative products. The design of the mask is defined by the PCB, the machine and the customer`s requirements. Possible combinations of the ISOVOLTA Universal Frame, ISOVOLTA Soldering Frame and the ISOVOLTA Flexible Suppressing System. (ISOVOLTA Suppressing System: ensure suppression and alignment of critical PTH components.) Combination ISOVOLTA Soldering Mask and ISOVOLTA Suppressing Panel for reliable and accurate alignment of PTH components. Innovative solutions guarantee quick and comfortable handling. Product combinations Top Hat Systems Universal Frames Flexible Top Hat System Magnetic Carrier Coating Frames Pressfit Tools Router Tools Hand Soldering Tool
    > Read more
    Employees
    100 - 200
    Year of foundation
    1969
    Certifications
    ISO 14001

    Watch

    TechnoMetal s.r.l.

    Technomatel is specialized in welding and construction of welded structures in steel and aluminum. We are certified by Uni En Iso 9001 and Uni En Iso 3834-3. The welding is performed manually for small series and robotized for medium and large series.The welding processes available are mag, mig, tig. We are 40 employees. We are able to supply the product of metal carpentry complete also of surface treatments (cataphoresis coating, powder coating, electrolytic galvanizing and hot galvanizing).
    > Read more
    Employees
    20 - 50
    Year of foundation
    Certifications
    DIN EN ISO 3834

    Watch

    Paul Weber GmbH & Co.KG

    The company Paul Weber GmbH & Co. KG was founded almost 80 years and now has its headquarters in Herrenzimmern in Rottweil / Germany. With a complete range of precision turned parts, we supply our customers nationwide and internationally. Our main products: Turned parts, eccentric, round, square, hexagonal, flat, profile Precision turned parts, CNC turned parts, machining parts, turning parts short, multi-spindle parts, Rotary transfer machining parts as * Expanding nuts, bolts, screws * Locking pieces, * Valves * Banjo bolts * Eccentric bolt, eccentric, * Bearing pins * Terminals * Rivets * Jacks * Standoffs with milling the thread, Standoffs * Fittings * Sleeves We process these materials: * Cutting steel, stainless steel, stainless steel 1.4305, * Brass, non-ferrous metals, * Copper, copper alloys, * Special alloy * OSNA CU * Aluminum, aluminum alloys * High-alloy steels
    > Read more
    Employees
    20 - 50
    Year of foundation
    1930
    Certifications
    ISO 9001:2015

    Watch

    Reltas AG

    Our roots go to the BBC / ABB electron tube factory in Baden, later Lenzburg, back, which sold the ABB Group in 1993 to the Thomson CSF in France. In 1994, the manufacture of electron tubes was transferred to France, only the production of the mechanical parts for electron tubes, including the associated processes, remained in Switzerland and took place in Klingnau a new location. In subsequent years, new businesses have opened up and expanded continuously in Switzerland and neighboring countries. Then in 2009 was the transfer of the production of parts for electron tubes to France and the location Klingnau was taken over by the former Managing Director (Management Buy Out). We offer: Turn Mill Brazing Annealing Heat treatments in mixed gas as contract manufacturing
    > Read more
    Employees
    Year of foundation
    Certifications

    Watch

    Sinoquest International Trade Ltd.

    Since 1989, we've supplied machined, stamped and cast parts and assemblies to Motorola, API-Deltran (Koll Morgan), API-Getty (Elwood) and Wabash Controls. Danahe, Soloflex and other North American and European companies come to us too. We also offer plastic molded and rubber parts, as well as magnets and assemblies.

    There are five experienced senior engineers in our company. We can do engineering coordination and arrangements, production control, quality control, such as PPAP, SPC, per ISO9000 and QS9000, etc.

    We accept samples, drawings, and electronic format drawings, such as scanned drawings, PRO/E format, AutoCAD format, and Solidworks format. We can even help our customers to improve and finalize their designs with cost saving and feasible processes when requested.

    And as today's demand, we issue prompt production status information to our customers at weekly basis. Customer satisfaction has been our only service criteria.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1989
    Certifications
    ISO-TS 16949:2
    TP Suche Banner

    Watch

    METTEC CNC Metallbearbeitung und Gu...

    Specialist in the machining of castings from aluminum, cast iron, brass, bronze and steel parts Individual production of drawing parts according to customer specifications from prototype to series of 100,000 units in Specializing in the machining processes milling and turning Mastering CAD / CAM programming for fast and high-precision manufacturing Our own tool and jig allows quick series start and high flexibility 50 specialists in turning and milling at two locations in Buchkirchen in Wels technologically strong partner with high investment potential in modern machinery Industries Served: Special vehicle industry, automotive industry, equipment construction, design, rail vehicles, Winter sports industry, mechanical engineering, electrical industry
    > Read more
    Employees
    50 - 100
    Year of foundation
    2004
    Certifications
    ISO 9001:2015

    Watch

    Schöma Christoph Schöttler Maschine...

    SCHÖMA - In the team we develop traction! Founded in 1930, SCHÖMA - Christoph Schöttler Maschinenfabrik GmbH - is a manufacturer of rail vehicles and specializes in the development and production of customized, individual transport solutions. Especially in tunneling, SCHÖMA locomotives are used in almost every well-known underground construction project worldwide. Shunting and factory locomotives for in-plant transport in the raw material-producing industry as well as service and maintenance vehicles and special locomotives for use in amusement parks are also included in the scope of delivery of SCHÖMA. On the basis of an economical modular system, SCHÖMA offers its customers a large variety of equipment and variants. Our designers develop individual technical solutions for a wide variety of rail transport problems. With the delivery of a locomotive the job is not done for us. Our fitters take over the commissioning of the locomotives and the briefing on site For decades we guarantee a secure worldwide spare parts supply. In addition to the technical individual transport solutions, we offer corresponding economically customized solutions that relate not only to the individual payment and delivery conditions but also financing and rental of locomotives. For tunnel construction projects, we will take back the locomotives after completion of the projects on attractive terms on request. Quality comes from qualified employees who judge and act on their own responsibility. Our work processes are organized transparently, responsibilities clearly regulated. The quality management system has been successfully certified according to the regulations of DIN EN ISO 9001: 2008. Our company is certified according to DIN EN 15085-2 for the welding of rail vehicles and vehicle parts. SCHÖMA product range Our strength lies in the development and production of locomotives and rail vehicles in customer-specific design, even for the smallest quantities up to lot size one. Underground and tunnel locomotives For tunnel gradients up to approx. 7%, we have developed a special drive system that ensures the necessary traction even under poor track conditions. Factory and work locomotives For such applications we develop shunting locomotives up to approx. 80 t weight and 700 kW engine power in all worldwide standard gauges. Our references cover steel and building material companies as well as the chemical industry. Special rail vehicles For special transport requirements, we offer locomotives, which are usually required in small quantities for special purposes. These are tourist railways and amusement parks as well as working and light rail locomotives, which are mainly needed for narrow gauge rail networks.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1930
    Certifications
    DIN EN 1090

    Watch

    ZGPU GROUP GmbH

    The company has two production sectors: The first - the production standard in the field of electronics, electrical engineering and automation. We develop, manufacture and market the following products: rotary encoder (incremental and absolute), Hallefekt sensors, inclination measurement sensors, pressure sensors, magnetic encoders, equipment for induction heating, vibrating conveyor and linear conveyors, power-claw and Bellows, Prezisions membrane and Bellows. The second direction is the production of individual parts and assemblies for specific customer requests. We offer the following finishing operations: turning, milling, drilling, grinding, sawing, hardening, Brühnieren, bending, stamping, welding, sandblasting, powder coating, marking, electroplating, powder coating, chrome plating, zinc plating, nickel plating, anodizing, pressing, rolling, pouring, Installation of electrical engineering and fine electronics among others We process: steel, stainless steel, cast iron, cast iron, plastic, rubber, copper, brass, aluminum anda Our performance in machining of the parts are as follows:  machining of rotational parts on CNC machines. Maximum AbmessungØ200, L = 200 mm  machining of prismatic parts with CNC machines. Maximum Abmessung300 mm x 300 mm x 200  Universal turning operations of rotary parts from bar stock up to Ø60 mm blank piece with maximum dimensions Ø315 mm.  Universalfräsoperationen of parts with maximum dimensions 1000 mm x 500 mm  Precise milling with dimensions 320 mm х 320 mm х 320 mm  grinding operations: surface n, surfaces with dimensions 600 mm х 250 mm, external cylindrical grinding up to Ø150 mm L = 300 mm, internal cylindrical grinding up to Ø60 mm L = 60 mm  Drilling and locksmith operations of parts and assemblies  stamping parts with eccentric press  punching and bending of sheet metal parts with programmable punch - thickness of the material max.3 mm.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1986
    Certifications
    ISO 9001:2008

    Watch

    Forte + Wegmann GmbH & Co.KG

    The Forte + Wegmann GmbH & Co. KG was founded in 1950. Located located in a former center of the metal industry, our roots originally in the production of machine parts for the textile industry. Addition to specializing in the wire processing in the field needle manufacturing and processing, we were involved in the course of history in the fields of metal forming, punching and deep drawing. In 1980, in a generation change the management was handed over to the daughter of a founder of the company, the way was open for expansion and future-oriented technologies. Thus, since 1982, the CNC milling an important business of the company. In conjunction with the latest CAD / CAM systems is the process, then and now, always conducted with the highest standards. In the following decades Forte + Wegmann has developed technologies and products for various markets. For example, we manufacture metal housing for electronic modules, we are active in tool and mold making, we produce erosion electrodes, etc.Currently, we produce a wide selection of parts for the aerospace industry and supply industrial partners throughout Germany. In order to raise the profile of our corporate priorities Forte + Wegmann is divided into three business areas since 2004. The extension of our original core competence, the CNC milling technology, which is now incorporated "divicut" in the business, was a logical step for us to remain competitive for the future challenges. The second business, "divisign" includes the three-dimensional measuring technology and digitization with optical instruments. So "divisign" offers 3D scanning services and software for 3D metrology, reverse engineering, 3D visualization, and - in conjunction with "Divicut" - Rapid Prototyping (HSC / 3D printing) to. "Divimac", the third division, dedicated to the assembly of components. In this business modules are completed.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1950
    Certifications
    ISO 9001:2015

    Watch

    Codato srl

    The company Codato srl bestows since always the constant market developments and new technologies the most attention and always provides customers with a solution for the challenges they face: Faster order processing Variety of editing options variable batch sizes High quality of the product competitiveness We have, in fact, have the appropriate equipment that allows us to orders from single pieces up to thousands of series in all materials, in plastic or metal, execute; we have an always well stocked warehouse, in which the rods in the most common sizes of the various materials are stored, so that we can address the urgent orders in a short time. We are active in numerous sectors of products, using mechanical machining required. Thanks to our years of experience, we are also able to advise the customer on the most cost-effective production of a part. MACHINERY Our machinery consists of: mill Manufacturing center Chiron with Traverse X550 Y300 Z280 Milling Center Kitamura with two pallet tilting tables, traverse X300 Y200 Z300 Conventional milling CNC lathes Lathes with 2, 3 and 6 axes for the machining of the bar and the post ABC lathe with 5 axes for machining from bar Lathes with adjustable turrets Citizen with 8 axles to a diameter 32 Turning machines and conventional machines Thus we are able to process turned parts of the rod with diameters from 3 mm to 70 mm and to perform post-processing to a diameter of 250 mm.
    > Read more
    Employees
    10 - 20
    Year of foundation
    Certifications
    ISO 9001:2008

    Watch

    A.MANNESMANN MASCHINENFABRIK GmbH

    A.MANNESMANN MACHINERY FACTORY GmbH We are specialist in manufacturing of geometrically demanding, high-precision machine elements with high aspect ratio in lengths up to 15m and more. Even with large dimensions, the micron is our unit! We are manufacturing partners internationally successful companies in the machinery and plant and even independent company. The requirements of our customers on the quality of our products, at cost and schedule reliability are the leitmotifs of our service philosophy. We take your technical challenges and support you in the optimization of structures and manufacturing designs, from the beginning, and strictly confidential. We produce and supply documented quality. Visit www.amannesmann.de us on our website
    > Read more
    Employees
    100 - 200
    Year of foundation
    1796
    Certifications
    ISO 9001:2008

    Watch

    Jostmeyer Metallverarbeitung

    We are an industrial and commercial agency with direct suppliers and production facilities in Poland, Czech Republic, China, Italy, Taiwan, India, Turkey and Germany. We design and produce together with our partners to our customers in the following areas: Welded structures such as caddies, storage racks, long-product pallets. Steel construction, welding in general. Surfaces such as rays, galvanizing, painting, powders. Sheet metal processing all materials: CNC punching, nibbling, edges, laser welding, cutting Fully automated bending center, powder coating, Deep drawing, laser cutting, punching from coil, components, Services according to customer requirements Turned parts, milled parts made of all materials Castings and their processing Plastic injection molded parts up to 2,500 grams weighing, + Toolmaking Extrusion plastic profiles Aluminum profiles and their processing Cable assemblies, wire harnesses, control boxes and control cabinets completely Agricultural Engineering Bent wire parts Diecast Bend and process tubes
    > Read more
    Employees
    Year of foundation
    1986
    Certifications
    ISO 9001:2008

    Watch

    MegaPlast GmbH

    MegaPlast GmbH was founded in 1991 and is your reliable partner for injection moulding, mould making and prototype construction. With competence, experience and motivation, we can offer our customers everything from a single source, from conception, prototyping and tool making to series production. We manufacture for you in 1- and 2-component technology, hybrid components on 37 injection moulding machines. ARBURG and DEMAG machines with clamping forces from 25t to 350t are available to meet customer requirements. Dealing with stack and multifunctional moulds and their careful care is a constant practice and thus a prerequisite for components of the highest quality. Our tool shop has an efficient machine park with which we manufacture injection moulding and punching tools from aluminium or steel. The quality of an injection moulding tool has the highest priority in order to guarantee a proper high-quality injection moulding. We achieve this quality with experience, know-how and modern machines. Our tool shop is supported by the CAD/CAM program SOLIDWORKS/SOLIDCAM. We work and act according to DIN ISO 9001:2015 in order to achieve our quality goals in the long term. Furthermore, we are able to measure components optically and tactile 3D at any time with the help of our WERTH measuring machine and our 3D scanner. Furthermore we are able to create a reverse engineering. Also an EMPB or PPAP creation according to VDA is no problem. Our range of services: - Construction Solid Works - Production of cast components from PUR & nylon with corresponding property modifications - mould making - Toolmaking from aluminium and steel - gauge construction - CNC milling of metal and plastics - CNC fairs - 3D printing for metal and plastic materials - Injection moulding production up to mass production on currently 38 machines up to 350 tons - Tampon and screen printing With our machine park in the production with 36 injection moulding machines we are able to process technical plastics, e.g: PA, ABS, ASA, PC, POM, PE, filled or unfilled and coloured according to RAL as well as crystal clear material PMMA. We also process elastic plastics (rubber).
    > Read more
    Employees
    50 - 100
    Year of foundation
    1991
    Certifications
    ISO 9001:2015

    Watch

    Modell- und Formenbau J. Gördes e.K.

    We from the model and mold construction J. Gördes produce since 1989 molds, devices, prototypes and foundry models on the highest level. Our aim is to provide our customers with the highest level of quality and dimensional accuracy in the form of our products in order to best support the customer processes. In this way, we create added value in the entire following production chain. In addition, we are available with our entire know-how for our customers and also bring us far beyond the actual mold making. From the very beginning, we understand our customer relationships as long-term partnerships in which we can develop together in order to achieve the greatest possible added value on both sides. The decisive factors for customer satisfaction are essentially the following aspects: • Documented dimensional accuracy • Production quality • Handling in the manufacturing process of the customers • Fast and competent advice and order processing • On-time delivery All employees are involved in the continuous improvement process to achieve the highest possible quality standards, and this ensures day after day that all the knowledge and experience contribute to the sustainable development of our products. In addition to our customers and employees, our suppliers are also part of the quality philosophy. Through long-term cooperation and continuous exchange of experience with them, we ensure consistently high quality and further development of our products. Likewise, we keep up to date with the latest technology through lively exchange with innovative suppliers. With this quality policy we pursue the following goals: • a high level of customer satisfaction in terms of the quality of our services and products. • the lasting assurance of high quality at all stages of the work process through careful planning, preparation and implementation of all necessary actions • the consistent application of preventive quality assurance measures to minimize or avoid the occurrence of errors. • securing the organizational conditions to ensure smooth and close cooperation of all employees of the company permanently. • Compliance with all customer requirements and legal obligations Our quality management is defined in a handbook and corresponding applicable documents and thus binding for all employees of the company.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1989
    Certifications

    Watch

    Evocut GmbH & Co.KG

    The Evocut GmbH & Co.KG was on 17/03/2011 founded by Andreas Bauer and Stephan Pertl. Through years of experience in CNC production of Andreas Bauer and experience in project business by Stephan Pertl we can already well-known companies among our customers. From the beginning, our focus is on fair and partnership with customers in the foreground. In constant dialogue with our customers, we are guided consistently on their goals and their optimal implementation. Our focus lies equally on quality, delivery and service. Perfection is our drive
    > Read more
    Employees
    10 - 20
    Year of foundation
    2011
    Certifications
    ISO 9001:2008

    Watch

    Hennig GmbH Stahl- u. Metallerzeugn...

    The "Hennig GmbH, steel and metal products" in Pfullendorf, Baden (20 km north of Lake Constance), is a technically modern equipped, qualified family-owned business in the industry. The company specializes in the "cutting and assembly of series, single parts and assemblies", and is a reliable partner for a number of nationally known companies and corporations. Mostly wrought and saw blank, Hennig manufactures components, which are used, among other things in the clamping means and commercial vehicles, as well as in textile machine or pump, engine and transmission technology.On a variety of visual and functional parts, this complex milling, drilling, turning and grinding processes with modern tools and machines are used. Reaches Process capability and ensures Hennig by a quality management system certified according to DIN ISO 9001:2000. Production methods: Flexibility through the manufacturing process in house as: Turning point turning, CNC turning, milling, 5-axis machining, drilling, Surface grinding, CNC grinding, cylindrical grinding, 3D Measurement Spaces, grooves evacuate, evacuate gears, bumping, marking, Sawing, cleaning, assembling, assembly of components, painting ... Product examples: • Range: VEHICLE INDUSTRY Clutch and transmission parts, magnetic body, anchor plates, Rotors, pulleys, drive shafts, deflection shafts, Hubs, wheel hubs, swing axles, engine components .. • Range: SPANNTECHNIK Base jaws, jaws block,
    > Read more
    Employees
    50 - 100
    Year of foundation
    1979
    Certifications
    ISO 9001:2008

    Watch

    Ironicon Kft

    Small and big serial production are currently the main focus of work, however Ironicon’s employees also possess several decades of work experience in custom production. Furthermore, the production of tools is also part of our profile. The vast majority of our products are made of aluminum, different types of plastic as well as rustproof and tool steel. Our plans for the future: Aiming for an increase in capacity, developing and enlarging the machine park is an important medium-term goal for Ironicon. As every firm relies on its employees, building up a good, functioning team is among the main long-term objectives. As part of the continuous expansion as well as in order to create a more livable work environment, steps are currently being taken to move in into a bigger, newer and more modern production hall. Ironicon Kft. was founded in 2015. Based on the founder’s national and international experience, the aim was to establish a modern, dynamically growing operation, with European standard and approaches. Only half a year later, a second CNC milling-machine was put into operation as a reaction to the drastic increase in orders. Thanks to repeated orders by regular customers as well the increasing of the customer base, Ironicon experienced constant growth from this point onwards, and was able to extend and modernize its machine park. When acquiring new machines, extraordinary attention is given to high quality in the measurement instruments and devices, for quality within adequate time can only be attained with quality infrastructure. By the third quarter of 2018, the work was already been done by four 3-axis machining centers as well as one 6-axis CNC longitude turner. All our machines can be controlled by Cam System, allowing a faster and more effective working process and eliminating the vast majority of production faults already before production. In December 2018 our firm came to another turning point when we bought two additional machining centers, which brought the total number of 3-axis machines to five. We also acquired our first 5-axis milling machine, which is also capable of manufacturing tolls as well as milling graphite. Punctuality and reliability are key to our success. Getting to know the customers’ needs and delivering the work with high precision and on-time are absolute priorities for our young, dynamic firm.
    > Read more
    Employees
    5 - 10
    Year of foundation
    2014
    Certifications
    ISO 9001:2015

    Watch

    Modellbau Fickel GmbH & Co.KG

    Our registered office is located in Schönheide, a nice industrial and business place in western Erzgebirge (Ore Mountains) (New Federal States). My company is located since the beginning of 1992 in a newly constructed factory building and is equipped with modern technology. By the use of two CNC- tool milling machines (maximum travel 1.50 x 1.00 x 1.00 m), two HSC machining centres and a 5 – axle – CNC – milling machine we are able to work effectively. The operations are prepared by modern CAD / CAM workstations like: Pro Engineer, Gib-Cam, Depo-Cam and Auto-CAD-Mechanical Desktop. By means of these systems we are able to accept and process data of our customers in all common formats in order to carry out thus every machining task with the most effective milling strategy. We are 17 employees and produce synthetic and metal patterns, permanent moulds, tools and jigs as well as complete pattern devices and match plates. Should you be interested in a cooperation, we would be very grateful if you include us in your circle of tenderer.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1986
    Certifications
    ISO 9001:2015

    Watch

    Blech- und Maschinenbautechnik Peit...

    Our company was founded in 1999 and has since performed as a sole proprietorship. Initially, we offered our services in the areas - Laser cutting, - Milling and - Grinding of. Over the years, we expanded our range to include the - Cutting production, - The folding and - Welding and were thus a competent partner in the component and system manufacturing. In collaboration with our partners for surface treatments and heat treatments we offer our customers ready to install solutions.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1999
    Certifications
    ISO 9001:2015

    Watch

    MRD Engineering d.o.o.

    The company's goal is to offer high precision with an attractive price. The highest requirements are respect for delivery conditions, cleanliness and precision in the business. We focus on the production of parts, smaller series and prototypes of general engineering. We process materials such as: - Stole - Gus - Aluminum - Brass - Plastic materials Preparation for production is done using the SOLID-WORKS and SOLID-CAM programs. We use 3D models (step, iges, etc.) that we use for the development and technology of manufacturing in Solid Works. In the next phase, we use the same model for CAD CAM programming. SolidCam allows the creation of various geometric images and shapes and facilitates the production of complex parts.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2017
    Certifications
    ISO 9001:2015
    TP Suche Banner
Limit search by:
Region
Technologies
Materials
Company data
Industries
Certifications
Top categories
CastingSintering