Find Measurement device / Test device .

Welcome to Techpilot: Europe's largest platform for the manufacturing industry. For over 22 years, we have been connecting buyers with suppliers that are a perfect match for each other.

    As Innotech we provide our services in the field of project designing and manufacturing of production systems, assembly lines and automation systems with our team, which consists of 35 members, on an area of 3000 square meters in Bursa, Turkey. Mainly, we provide services to our local and global clients within the automotive,electronic ,medical ,textile,metal industry etc. Main machines: Welding machine/fixtures,Assembly bench/machine , Poke-yoke bench/machine , Test bench/machine , Automated Assembly Line , Robotic Line , Cutting and punching machine , Roll Forming Machine , Drip Irrigation Pipe Machine , Measurement fixtures/gauges , Fixture/mold
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2017
    Certifications
    ISO 9001:2015
    High precision, complex turning, milling and grinding parts - from 4 mm to 1,800 mm in diameter and up to a length of 2000 mm and finished assemblies, ball screws and motor spindles for the automotive, mechanical engineering, power tools, aerospace, heating and Building Construction. Manufacturing capabilities work Wertach:
    • Turning and Dreh-/Fräsbearbeitung to Ø400mm, length up to 1000mm
    • Milling and Fräs-/Drehbearbeitung cubic and rotationally symmetrical parts to ø1800mm, length up to 1000mm.
    • Feinstbearbeitungstechniken * External grinding part length max 3000mm, 1000mm ø max * Internal grinding part length max 1400mm, 1000mm ø max * Spline grinding ø max 300mm, length up to 800mm * Spline grinding groove width 4mm to 40mm groove width 220mm Ømax * Surface grinding 800x400x500mm * Honing ø4 to Ø72mm
    • Heat treatment: quenching and tempering, case hardening, carbonitriding, vacuum hardening, annealing, Kurzzeitgasnitrieren, carburizing, induction hardening and freezing
    • Deep-hole drilling
    • Clear
    • Deburring
    Production spectrum ballscrews
    • Diameter 12-125mm
    • Thread length up to 3000mm
    • Gradient of 2.5 mm to 50 mm
    • a and mehrgänging
    • Investment type: 2-or 4-point system
    • Accuracy classes 1-3-5-7-10 ISO 3408
    • Feritungsverfahren whirled / ground
    • Special threads on request
    • The stiffness
    > Go to profile
    Employees
    > 1000
    Year of foundation
    1955
    Certifications
    ISO-TS 16949:2
    CONCEPT As a service provider in the machining segment, ALCUTEC GmbH & Co. KG specializes in high-quality and customer-oriented processing of aluminum. Efficiency, accuracy, certified quality and innovative technology make ALCUTEC one of the leading companies in this field. As a service-oriented company ALCUTEC can take over all common surface treatment (eg anodising, chromating, hartcoting, paint, nickel, teflonbeschichen, glass bead blasting) the marking with laser and a variety Module assembly. ALCUTEC is equipped with the latest CNC machining technology and the corresponding CNC metrology. It produces CNC milled parts made of light - and non-ferrous metal in small, medium and large series range that meet through various mass finishing process (barrel finishing) the highest aesthetic demands. SERVICES Materials Aluminium AlCu (eg 2017, 2024, 2219), AIMg (egB. 5005, 5056, 5083), AIMgSi (eg 6005, 6012, 6060, 6082), AlZnMg (eg 7019, 7022, 7075), various special alloys such as PLANAL, FORTAL, MIC6, UNIDAL and ACP ect. Copper: E-Cu (Cu-ETP/CW 004A), SF-Cu (CW 024A), SE-Cu (Cu-HCP/CW 021A) Brass CuZn 15 (CW502L), CuZn 37 (CW508L) CuZn39Pb2 (CW612 N) Bronze: CuSn6 (CW452K) Plastic Delrin (POM), polyethylene (PE), polyamide (PA), Teflon (PTFE), epoxy fiberglass (HGW2372, FR4) Products: From the smallest part to the machine component with dimensions 500x500x500 mm our manufacturing technology are limitless. Our range includes CNC 5-axis milling parts such as covers, adapters, stop, shoot, fasteners, brackets, guides, bearings, swing, cabinet, carrier, base, sockets, heat sinks, bars, plates, prisms, angle, centering, visor, motor mount etc. Processing methods: Aluminium-/Leicht-und non-ferrous metal processing, CNC 3-axis milling, CNC 4-axis milling, CNC 5-axis milling, aluminum machining, CNC metal processing, CNC metal machining, precision - milled parts, Vibratory Finishing Machines for deburring (Trowal), assembly work. Heat treatment, surface coating and labeling: We offer anodizing, chromating, hartcoting, paint, nickel, teflonbeschichen, glass bead blasting and laser label. Certified quality: An internal quality assurance with all the classic test and measuring equipment ensures the delivery of flawless workpieces. Accuracy, efficiency and punctuality are the result of a well tuned workflow. Our workmanship meets the highest quality requirements. Customer orientation and a fast implementation make the ALCUTEC GmbH & Co. KG is a reliable and competent partner.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1996
    Certifications
    ISO 9001:2015
    From the idea to the product from a single source! The company was founded in 1989 for the development, manufacture and sales of precision mechanical systems. The operation is mainly geared for the individual needs of customer requirements. Here is the spectrum produced by the pattern part, series, part, to the developed and tested system. eg Precision parts in precision engineering / mechanical engineering Parts and assemblies for precision mechanics and optical-electronic devices Appliance, apparatus engineering, special purpose machines Turned parts, milled parts, patterns of development, production parts, prototypes, redesign Manufacturing equipment for the semiconductor and electronics industry (test systems, wafer recordings, substrate handling, wafer probing). Laser systems and handling equipment (laser marking, laser scribing, laser cutting Laser welding). Parts and system components for the micro-resistance welding technology, graphical measurement u. Control systems, optical systems for the medical andbiological research, etc. ........... Manufacturing services alphabetically: A Bending Apparatus Release B Coating * Label Turn Sheet metal processing Sheet metal parts Boring Brines * C CNC turned parts CNC milled parts CNC parts D Wire EDM Turn Turned parts E Electromechanics Anodizing * Erode F Precision Engineering Precision Engineering Surface grinding Form milling Mill Frästeile G Electroplating * Thread forms Thread Milling Threading Engraving B Hard turning Brazing Hardening K Stick Complete machining Construction L Painting * Laser marking * Laser cutting * Solder Air pressure switch M Measuring Mount N Nitriding * P Polishing Check Powder coating * R Rubbing Rolling * Round table processing Cylindrical grinding * S Sandblasting Saw Grind Slit Cutting
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1989
    Certifications
    Wagner inside ... Our precision components made of engineering plastics in many areas provide for smooth and reliable operation. Generally invisible, they are as a guide bushings, spring settings, sealing rings and roles critical to the reliable operation of machinery and equipment. It does not matter to us whether you can customize for your task thin or extremely small precision parts of 1.5 mm diameter in series, require pre-series prototypes for a new perfume flacon or whether we according to your drawings, samples or according to DIN make: We strive daily to exceed your expectations with quality, technical advice, service and delivery speed. Our parts are everywhere in demand where it comes to minimal manufacturing tolerances, concentricity and perfect surface finish. To guarantee our guide bushes in the photo technology for fast, precise focusing of lenses. Parts for medical devices secure in surgery as well as oxygen-pressure couplings medical care and in the hydraulic parts for our systems ensure tight even at extreme compressive forces. Our parts play important roles in printing machines, copiers, mailing machine, medical care strips, medical equipment and dental equipment, high-performance prostheses, test and measurement equipment, coffee machines, designer lamps, furniture, machinery, medical equipment, machinery, apparatus, instrumentation, control equipment, hydraulics, pneumatics, electrical , Badtechnik, water engineering, optics, photographic technology, lighting design, lighting, interior design, audio engineering, music technology, musical instruments, games, sports and fitness. You will not find a product area where our parts are not used. Sleeves, guide rollers, bushings, caps, gaskets, container and screws are used everywhere. And no matter whether in engineering, furniture or medical technology - "Wagner inside" is our guarantee for quality and precision
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1891
    Certifications
    The WEVO Metal Technology Herrmann GmbH is a versatile metal fabricators supply industry with 25 employees. Emerging from the tool and fixture, the WEVO Herrmann GmbH has established metal art has long been a manufacturer of tubular assemblies, welded assemblies, metal stamping and bending parts as well as special machines and machine components on the market. Through the use of advanced CNC machining centers, we are always able to produce according to customer. In addition to ultra-modern 4-Achsbearbeitungszentren we use depending on the machining task also special machines. The fabrication of devices and aids in our own tool allows us to manufacture exactly according to your specifications and requirements. In our modern average equipped welding shop we finished up 2mx3mx3m complex assemblies in steel, stainless steel and aluminum. Our qualified employees and the company have constantly tested welding qualification tests according to * DIN 18800-7 (general steel construction) * DIN EN 15085-2 CL1 (rail cars) The WEVO Metal Technology Herrmann GmbH is certified according to DIN EN ISO 9001:2008, Quality Management and the German Bahn AG recognized Q1 supplier. We would answer your inquiry as soon as possible with a reasonable price and of course, do not hesitate to visit ready.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1991
    Certifications
    DIN 18800-7:20
    WMSTECH your innovative specialist for Clamping devices, prototype, series & contract manufacturing, NC programming, engineering & application technology (process and machining concepts, tool and machine design) cycle time optimization, process optimization, Measuring devices, Leak test inserts, leak test systems, leak test systems, assembly systems, Robot gripper, robot handling, plant and mechanical engineering, spare parts production WE GUARANTEE SPAN [N] UNG. In our production, we rely on a technologically ultra-modern machine park. In particular, flexibility, fast delivery times and high quality standards ensure satisfied customers. If we have piqued your interest, please visit us at: https://www.wlw.at/de/firma/wmstech-gmbh-1768299 http://www.wms-tech.at/ for PROFESSIONAL ADVICE AND INNOVATIVE SOLUTIONS send us your projects or inquiries to office@wms-tech.at. We are happy to support you in the implementation.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2013
    Certifications
    ISO 9001:2015
    We manufacture from individual parts to complete machines. Above all devices, equipment and small series (bis. about 500 pieces). Competent and with great experience, we work every day creative solutions to clients at home and abroad. We like to go unconventional paths. Not just on principle. From experience we know that often just lead them to the goal. We see complex and unusual tasks as challenges, which are particularly exciting. And on whose solution we are really proud of. Down to the smallest detail. Precision Machined develop, manufacture, we measure and assemble for you machines, devices and components - because they can look very closely. What can we do FOR YOU? Basically EVERYTHING that you need for making your products or even the product itself: Machines, devices, assemblies or just items: After our design or customers, including functional test and acceptance report (mechanics) from small parts to large part Small parts min.3 x 3 x 3 mm and up to 0.3 g Large parts max. 8000 x 2000 x 1000 mm and up to 6000 Kg Even "problem parts" of lot size from 1 to 200 CNC turning and milling parts in 4 - and 5 - axis machining or multi-sided machining in one clamping position. For everyone, including stainless, high strength and hardened steels, aluminum, non-ferrous metals and plastics, including fiberglass-reinforced Basic frames and components made ​​of steel or aluminum welded construction or cast version. fully assembled mechanical structures with high precision (15 microns) for various applications Workpiece-related fixtures with unit weights up to 6000 kg (hydraulic and / or mechanical) for multi-sided machining and multiple voltage according to our own design or customer specifications * 4-WAY JIG * 1-UP JIG * SWING CLAMPS * MANUAL CLAMPING DEVICE Device body (tombstone / rake / tension towers) Teaching and prototypes Mechanical assemblies and components for machine tools and measuring machines manufacturers such carriage, brackets, recordings etc. 3-D machined parts, mold frames and accessories for the tool and mold according to drawing and record Special parts and unique items according to sample or drawing One of our specialties is the Hard Milling and Boring workpieces made ​​of hardened steel or titanium
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1994
    Certifications
    ISO 9001:2008
    Binder Automation is a modern mechanical engineering company with 30 years of experience. Our field of activity is the development and manufacture of customer-specific special machines. Our individual complete solutions cover all relevant fields of activity of your project. From planning, design, manufacture and programming to service and maintenance by Manufacturing facilities: Our service areas are in areas such as - assembly and machining - Transfer and handling - Check and measure - Production lines and transfer lines - Special equipment, special machines - test stations - setting and riveting devices
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1991
    Certifications
    ISO 9001:2015
    BKG Intern The company Klaus Bongartz GmbH & Co. KG manufactures since the company's founding in 1970, high-quality turned and milled parts for the different sectors of the industry. Industries we serve: * Valves * Defense Technology * Hydraulic * Packing * Aviation * Machine Tools * Special machine * Textile Engineering Metal as a whole Specialization with years of know-how also in niches is the recipe for success of our business policy: Our company focuses in the field of metal processing drilling, turning and milling parts from steel and non-ferrous Metallen.Die company Bongartz has invested heavily - in common to the industry to use rotary- , milling and drilling machines, but also in wire and sinking EDM machines, honing and grinding machines. And at work "On the Mutzer" also chemical surface treatments such as manganese phosphating according to DIN EN 12476 and DIN burnishing be executed 50938 in best quality. The result was a high degree of vertical, which allows us to offer customer-friendly solutions of short distances, because the parts can dispense with long maturities to other converters. Our service goes even further: we offer you the mount of assembly, and in addition we can their product provided with a marking. Laser marking and roll embossing are the usual methods, but also engravings are possible with us. Our delivery and collection service makes us more independent of freight forwarding and parcel services. Qualification It is no longer enough to deliver quality today, so it should also be documented. For this reason, a quality management system was introduced in 1985 after the NATO standard AQL 130 and 131 and monitored by our customers and certified. Through the ISO 9001 certification in 1997, you can be sure that their product is in the best hands. Another customer led in 2000, the accreditation for aviation. Our expert staff will weitergeschult at regular intervals and qualifies for the tasks that you provide us. We are a recognized training company training his young themselves. Whether small or large series, to request a documentation of their product. 3D coordinate measuring Vielstellenmeßgeräte (SPC), layer thickness and surface roughness measuring instruments and many others who are all subject test equipment, the requirement to serve the customer complying with drawings components and assemblies to deliver. Convenient location Our company is conveniently located between suppliers and customers in a prime location in space. The proximity to the Netherlands, where we supply customers, as well as the proximity to the Ruhr area are of great advantage. So you can achieve a good, fast communication, not even raises major problems. With the location in the district of Viersen company founder Klaus Bongartz is just as happy as his daughter Jacqueline, who took over from him in early 2005, the management and it brings two decades of experience in his own company. Loyal customers for over 35 years The strength of our company is the absolute precision of the work. This pays off in the great trust of which put the often long-standing customers in the quality of the workpieces supplied, in individual parts as well as in large series. There are satisfied customers who keep our operation since 35 years loyalty.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1970
    Certifications
    ISO 9001:2008
    MediKomp From technical advice on the development and design to series production. With over 320 employees MediKomp stands for competence in terms of stainless steel. Item production, assembly-ready components or complete assemblies: We offer individual solutions in medium-sized batches. Benefit from our expertise Customers in the following industries: - Mechanical Engineering - Medical - Refrigeration and air conditioning technology - Vehicle - Architecture and Design - Food industry - Machine tools - Pharmaceutical industry - Computer Industry - Electrical Engineering - Laboratory and Analytical Techniques Sheet metal processing With our modern sheet metal working machinery, we offer this comprehensive technical processes - Laser cutting - Stamping - Embossing - Deburring Machine - Edge - Bending - Forming Machining Our modern machinery from over 40 CNC milling and turning centers is the backbone of our machining.In addition, complementary technologies such as honing, flat and cylindrical grinding. The programming of the individual machines via a central programming system in order to realize your ideas quickly. Processed materials: - Stainless steel - Aluminium - Brass - Steel castings Surface Technology High-quality and homogeneous surfaces to customer requirements! MediKomp offers a variety of possible surface variations such as: - Glass bead blasting - V-2A-rays - Grinding - Powder coating - Wet varnishing - Electropolishing Welding Approved quality! Our welding experts are consistently trained and checked on a regular basis: so that every seam is sitting! In over twenty individual welding booths all common welding processes are used: - TIG - MIG - MAG - E-welding - PPAW (powder plasma) - Resistance welding - Spot welding - Stud Welding - Laser Welding Prototyping According to your ideas, sketches or drawings we design and manufacture from concept design to series production: prototypes, first samples, custom made, test samples or pre-production parts as individual parts, assemblies, or as complete products includingElectronics. We provide quick solutions here by rapid prototyping of plastic (ABS, FRP or CFRP). Assembly Based on our years of experience with the assembly of medical products, also including electrical components, we assemble your products according to your wishes and demands! From simple assembly through to the fully assembled high quality OEM product: We will deliver your product in the best quality!
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    1999
    Certifications
    DIN EN ISO 3834
    We provide complete solutions of systems and devices (with and without structures), tools (sheet metal stamping) and test gauges and special machines of all kinds On our Tebis 2.5 and 3D programming courses, we can create all the editing programs. 2.5 and 3D machining also be run as subcontracting. The mechanical and spatial possibilities for the manufacture and assembly have since been expanded as the know-how. Further, huge investments of new production halls, crane systems, large CNC - controlled milling machines and Horizontalbohrwerken paved the path challenging as an interesting partner to the automotive industry, the press industry and the aerospace technology. Everything from a hand- Hydraulics, pneumatics and electronics round out our catalog of manufacturing options.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1969
    Certifications
    ISO 9001:2008
    The company RWGrass GmbH is in the range of CNC precision turned and milled parts and finishing of cast and sintered parts at home. Our products are manufactured in various materials and various sizes from small to large series. Our flexibility refers not only to batch sizes from 500 to 100,000 pieces - the adaptation to customer requirements using CAD are appreciated by our partners. The manufacture and assembly of precision mechanical devices and modules is our specialty. Presses, punching, squeezing, riveting, drilling, threading, screw, solder, tin, merge, shapes, spot welding, grinding, milling, turning, adjust, measure and test the purchase of integrated operations. The house tool makes us independent and allows for maximum on-time delivery. So workflows are optimized and customer requirements into account even better. Products: We manufacture turned parts: - Diameter from 8mm to 650mm - Length up to 200mm Milled parts: - Length up to max.800mm Materials: Stainless steel (eg 1.4301, 1.4404,), steel, brass, copper, aluminum, plastics Delivery program: Pump body housing, valve body, piston, adapters, bearing chock, collets, bushings, grips, power tap, shielding, solder lugs, optics carrier photodiode holder, spacer sleeve, stop in connector, female, fiber filters, sleeve, guide pin twist mechanism, driver twist mechanism, thumbwheel mechanics, different door- window buttons, different door window handles, press rings with slope, reference upper part, orientation completely, burner housing, hollow shafts, bolts, lever cylinder housing, shaft for drive motor, cap for drive motor, ball valve, sleeve, guide shaft, stop bar, assembly photographic technique, component assembly Motor snowmaking equipment , component assembly for medical and measuring equipment of human blood analysis;
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    Certifications
    ISO 9001:2008
    The Good GmbH in Dettingen currently produces over an area of ​​1,300 m² which now has 35 employees, high-quality and sophisticated turned parts to customer requirements, including all post-processing such as curing, grinding, electroplating surfaces in batches 100-20000 piece. Our main customers come from the fields of hydraulic and pneumatic industry, machinery and tool manufacturing, plant engineering and the automotive industry. Turned parts up to 65mm in diameter we finished off the rack, larger parts up to 250mm as feed rotary part. Our modern machinery enables us to accurately and inexpensive to manufacture. The quality assurance is an important part of our company. This includes, among other things, the certification according to the new DIN EN ISO 9001:2000, which was completed in early January 2003. Quality and precision: We manufacture all machinable materials and the latest CNC controlled machines, high-quality precision parts, from single parts to large series. Machining from bar complete with production of key areas by power-driven tools. Complete machining on modern multi-axis CNC lathes and machining centers. Finishes: All rework, as well as surface and heat treatments Chuck work up to a diameter of 250mm rotary parts of the rod: from 6mm to 65mm diameter and 500mm length Here it's all about top quality ... Quality means not only to achieve consistent quality standards, but to constantly develop new quality projections for our customers for us. That is why we always strive to keep our manufacturing and quality assurance at the cutting edge of technology. Our modern machinery with predominantly multi-axis CNC lathes, as well as highly trained staff allows us to manufacture high quality and sophisticated products to customer specifications.With years of experience and know-how We want to convince you as a customer and sustainable. If you want to produce quality, it must also be able to check. For this purpose, we use other than the conventional measuring and test equipment and computer-aided contourograph to measure complex outer and inner contours exactly can. We are About our cooperation partners able all rework, and to carry out surface and heat treatments. Thus, Our products meet a ready to assemble for our customers.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1980
    Certifications
    ISO 9001:2008
    Series and component assembly Cable assembly Measurement technology environmental, Vibration and climatic test Mechanical machining
    > Go to profile
    Employees
    Year of foundation
    1973
    Certifications
    ISO 9001:2015

    Watch

    D.V.M. GmbH
    Fa DVM GmbH is a relatively young company in Germany, but has been working for many years already with well-known German and European companies. Our establishment is located in the Swabian Unteraspach (Backnang). Fa DVM GmbH is a competent and reliable partner for the trustful execution of: • QUALITY TESTS • ASSEMBLY • REWORK • ZP / ZFP DESTRUCTIVE TESTING / DESTRUCTIVE TESTING • SUPPLIER MANAGEMENT available. Our wide range of methods and know-how are the basis for the successful and efficient implementation of your (potential) outsourcing projects. DVM company was founded in 2007. DVM company is certified to ISO 9001-2008.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2007
    Certifications
    ISO 9001:2008
    As a powerful company, we offer technical expertise in the field of metal processing. With qualified staff, know-how, practical experience and modern machinery, we guarantee the highest quality and punctuality. In the context of metalworking, we offer services ranging from single parts to assemblies up to complete production. We are your efficient partner in precision parts machining all materials: * Stainless steels * Heat-treatable steels * Cutting steels * Silver Steel * Plastics * Aluminum * And much more Machinery • CNC lathe MoriSeiki NL 2500/700 SY o with bar loader to 80mm diameter o Y-axis and driven tools counter spindle o machining length 700mm o Year 2008 • CNC lathe Mazak Quick Turn Nexus 100 II M o with bar loader to 42mm diameter o driven tools o Year 2007 • CNC lathe MoriSeiki DuraTurn 2550 o Year 2007 • CNC machining center MoriSeiki DuraVertical 5080 o with a processing area of ​​450x750 mm o Year 2007 • 3D coordinate measuring machine Tesa Micro-Hite 3D o 450x500x420mm measuring range o Year 2008 • Mitutoyo Surface Roughness Tester o Year 2008
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2007
    Certifications
    The company Weigt Präzisionstechnik GmbH stands for highest precision in the metal-processing industry. The company Weigt Präzisionstechnik GmbH specializes in CNC turning, milling and Tiefbohrbearbeitung in 5Achsen technology and for EDM and plastic thermoforming. Development and construction (CADCAM) on modern computer systems ensure consistent quality of parts, manufacture machines and plants in medicine and sports. The company E. Weigt Präzisionstechnik was sen in 1962 by Ewald Weigt. and his wife Annemarie founded Celle in Lower Saxony. The company was 1977 Weigt Präzisionstechnik GmbH. Since 1997 Thomas Weigt leads the company in its second generation as managing partner and gives the company the fresh pulses. It builds on the successful development of, opens up new business making-che, is based on latest technology and expanding the company further. The Weigt Präzi-sion GmbH is training and test operation for the profession of Zerspanungsme-chanikers - specialized in turning and milling technology - and makes up to eight young men-rule out. Since 1997 Thomas Weigt leading the company, Today, around 50 employees of Weigt Präzisionstechnik GmbH secure the com-pany aims: Highest precision, continuous quality assurance, short delivery times and punctuality, a high degree of flexibility and customer proximity - in short: quality through Präzisi-on Made in Germany. To the references of Weigt Präzisionstechnik GmbH include in addition to some small well-known companies from the automotive industry, sports industry, medical technology companies, aerospace and oil and gas industries. With over 40 years expertise in precision engineering Weigt Präzisionstechnik GmbH sets in the future on the development of new products and technologies as well as the Fort of the successful and trustful cooperation with customers and partners.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1962
    Certifications
    ISO 9001:2008

    Watch

    WIMATEX
    Tool presetting, test gauges, automation systems
    > Go to profile
    Employees
    < 5
    Year of foundation
    2003
    Certifications

    Watch

    Maag GmbH
    Founded in 1987, we are working as a manufacturing operation with well-trained skilled workers and modern machinery for companies in the machinery and equipment industry throughout the Federal Republic. We are suppliers and manufacturers of precision turned and milled parts, tools and equipment. We process hauptsächleich steels, stainless steels, tool steels, Auminiumlegierungen, copper alloys and plastics. We work together in our region with well-known Oberflächenberarbeitern. We have our customers always well satisfied both by our quality awareness as well as timely delivery and corresponding know-how. We always strive to meet your needs and deliver on time. For manufacturing and assembly of complex assemblies, the company MAAG SYSTEMS was founded in 2004. We offer the following services: * Single, small series and mass production of parts of any kind o Turn o milling o Drill / punch o grind o weld o ... * Construction / Manufacture of tools (cutting, bending, Injection), jigs and fixtures according to customer specifications or our own design * Handle and annealing of surfaces o nitriding / cure o anodize o sandblasting o engrave / inscribe o ...
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1987
    Certifications
    We are your EMS provider from Dresden! Our business segments: PCB assembly, electronics development, cable assembly and equipment installation From the cable design to the PCB, handle and process and we combine almost any electronic component. The implementation of the wishes of our customers is also a prerequisite for our work as compliance with DIN EN ISO 9001:2008, for which we are certified regularly for years. Our company is located in Dresden in the industrial area Coschuetz-Gittersee. More than 40 motivated and well trained staff handle your individual orders professionally and of high quality. PCB Assembly: We offer automatic and manual assembly in SMD and THT, can reflow and wave soldering and are capable of self-PCB layouts to create. Profiling component and solder paste printing are also standard as the separation of benefits and installation in vehicles or other assembly features. Electronics Development: analog, digital and microcontroller circuits here we focus it. From design to programming, we are your partner. In the field of engineering / design, we develop and manufacture for you specific, ergonomic housing and the appropriate electronics in individual design equal to it. Cable Assembly: Full and semi-automatic machines for cutting and assembly as well as Thermo-/Tintenstrahldrucker guarantee full service. Strands, control cables, wiring harnesses and ribbon cables, we can process all common and rare variants. Equipment Mounting: The construction and wiring of complete devices in accordance with the wishes of the customer is a challenge that we are happy. A subsequent functional test is available on request. For more than ten years, we offer electronics from one source - take it!
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1997
    Certifications
    ISO 9001:2015

    Watch

    ASC-AVIATION
    You need to reduce costs - compare prices - we can help you The Junghans is a modern company in the field of sheet metal processing. Our specialty is PRIMARILY in laser cutting and bending technology. In our machine park you will find the technologies that allow you to purchase your desired parts cost in the shortest production time. * Edit structural steels up to 40 mm sheet thickness * Edit stainless steels up to 25 mm sheet thickness * Edit aluminum to sheet thickness 15 mm * High-speed cutting * Oxide-free cutting Everything from one source - this is a key factor, which more and more customers appreciate. Our range of services covers the entire production variety, which is of the most modern sheet metal processing, welding, construction, engineering, and surface treatment for both powder coating and wet painting available. TRY U.S. - OR HAVE SOMETHING TO LOSE?
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    1977
    Certifications
    ISO 9001:2008
    Hitega Präzisionsmechanik GmbH is an owner-operated, medium-sized company specialised in precision technology. For more than 20 years and with over 100 staff members, we have been realising the technical concepts of our customers from the automotive industry, clean technology, semi-conductor industry, aerospace industry, medical technology, as well as the optical industry and the devicebuilding industry, innovatively, precisely ad efficiently in our plants in Gangkofen, Southern Germany, and Penang, Malaysia. Hitega is the specialist within the field of precision technology. As our customers’ partner, we take on the complete building of special machines and, as an OEM-Serviceprovider, we manufacture high precision modules and put together modular systems with electronic, pneumatic and optical periphery. In doing so we master the complete process, ranging from engineering to manufacturing and assembly processes to the quality-ensuring operational test, as well as procurement and logistics. Our actions are determined by the challenge to always offer a convincing benefit to our customers. Our fields of expertise: conception manufacturing assembly testing & inspection and distribution of high precision modules, modular systems and special machines with electronic, pneumatic and optical periphery We master: Engineering and project management Single and series-production of high precision modules and modular systems Assembly of mechanical modular systems with electronic, pneumatic and optical periphery, Production and assembly of prototypes Surface refining, laser welding and laser inscription of modules and modular systems Testing and checking of high precision modules and plug&play modular systems according to the customer’s specification Specialised procurement management Logistics
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1990
    Certifications
    ISO 9001:2015
    MKE produced for decades in Austria as a contract manufacturer of complex components, systems and components for railway engineering, machinery, heavy duty valves and automotive engineering as well as for film and medical device manufacturers. Our core competencies are in machining CNC turning, CNC milling, EDM and wire EDM, grinding and profile grinding. We manufacture using the latest CNC turning and milling centers, items and large series in a size range of 3 to DM DM 1800mm turning and 800 x 800 x 2000mm for milling. Our CNC lathes are equipped among others with MKE bar loaders, power tools and various serial devices. The materials that we process for you, go for plastics, brass, copper, aluminum, steel, chrome-nickel steels, titanium, and to Inconel (nickel-based alloys). The cutting of problematic materials is our strength. On our EDM and wire EDM we edit a variety of workpieces and materials of different quality and grade up to a maximum height of 500mm with a travel of 750x500mm. The surface quality of finished workpieces Ra 0.1 microns, cut with wires from 0.3 to 0.25 mm speak for themselves. Another core competency of the company MKE is the surface technology. In the house MKE following techniques for surface finishing are available: polishing, grinding, anodizing, copper plating, nickel plating, chrome plating, hard chrome plating, gold plating and coating and printing of parts, components and complete devices. In MKE course, all manufactured and assembled components and systems are up to the final inspection the prescribed tests and test by our quality assurance. We also deliver to the customer with customer-specific packaging and labeling the finished products directly to end customers. The CNC machining and assembly of complex assemblies and systems or complete devices at the highest level is our goal.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1881
    Certifications
    ISO 9001:2008

    Watch

    Stoppani AG*
    Stoppani is a leading European service company for machinery, high-tech and medical industries. The systems designed according to lean point of production facilities in Switzerland and Malaysia allow it to efficiently deliver us international corporations with products.
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    1913
    Certifications
    ISO 9001:2008
    The team of mesterCADők was founded 15 years ago, and has met challenges of custumers since that time. Engineers have got experience in automotive industry regarding construction , production, quality system and assurance. The team of mesterCADők has had purposful experience in manufaturing also. Our main activity 1.: serve the companies producing cable harness for cars with device manufacturer and test equipment by the help of CAD, high quality manufacturing and assembly of mechanical electrical and pneumatic parts. Our main activity 2.: design and high quality manufacturing of parts for machine, special tools, appliance made them from metal and plastic. Our main activity 3.: create unique test equipment, for example: ICT for PCB, for mobil phone Other activities: We can performe any metal works and maintenance of machine also. We can correspond to the higher level expectation!
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2000
    Certifications
    The company Zismann Druckguss GmbH is a foundry with 120 employees that manufactures diecast and chilled casting parts for all branches of industry. We specialise in the production of precision parts made of diecast aluminium and zinc. Monthly, 150 tonnes of zinc and 40 tonnes of aluminium are cast. Our commitment, the existing know-how and the constant dialogue between our research and development department and our customers guarantees the high level of quality of our products which also include safety parts. In our processing and assembly departments we mainly work and complete complicated parts ready for installation. Sythetic coatings, electoplating, a Trowal centre and all types of spray plants are used by us as a matter of course for surface refinement.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1955
    Certifications
    ISO 9001:2015
    We realize visions If we say that we realize visions, we mean more than 30 years, in which our customers have confidently turned to us. For example, if internal projects could not be solved in time, or you wanted to have realized an alternative, in practice, that could exist. Whether it was about prototypes or small series had to be paved. Whether in stainless steel, titanium or hard plastic, we have accepted every challenge and solved with a precision to IT. 5 Many projects have developed our customers with us to the production stage and our company continues remained faithful. The demanding tasks are the ones who wekken our ambition again and to provide the driving force, new. Since it is not critical how extensive the projects are also jobs as the replication of a carbine K 98, are for us just an incentive as the production of a test bench for wing assembly at Airbus. Curiosity and enthusiasm are attributes that we received us - and something that we are also a little proud. Translation by Google Translate
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    Certifications
    Business Since our founding in 1996, we are a recognized and established supplier and development partner for the fields of medicine, plastics, electronics, and the small appliances. We are an owner-managed medium-sized companies in the precision engineering and manufacture CNC turned and milled parts and specialize in Module assembly. With our employees, we use the technical concepts of our customers in an innovative, precise and efficient. By using modern processes and flexible company structure, we can respond to customer requests in a very short time. The individual skills of our team members as well as the in-house know-how are also important factors of our success and help you to master even the most difficult and demanding challenges. Our experience we associate with your wants and needs to provide function-optimized solutions.So the company Kozar is for partners: Special requests are quite normal for us. Production Highest precision shaped the success of our company. Depending on customer requirements, we undertake the planning, development and production. Our activities range from individual production to prototyping to small and medium series using CAD / CAM support. The activities are broken down as follows: Chipping production of precision parts on CNC machines: • Rotate • Milling • Drilling Processing and post-processing of standard parts: • Milling • Drilling • precision turning • Annealing The following materials are processed, among other things from us: • Aluminium • Plastic • Brass • nickel silver • Niro • Silver • Steel • Titanium • Tungsten Assembly We have the skills of assembly and complete fabrication of assemblies with mechanical, electronic and plastic technical components. The following activities comprise our diversified business segment: • Cable assembly • Soldering • Bonding • density / continuity tests • Bending of capillary tubes • PCB mounting • assembly of tubing sets for sample promotions Equipment manufacturing The equipment manufacturing is another area of ​​our company and includes the • Planning and • Develop of manufacturing equipment and machines. Art in precision The company Kozar is dedicated to the development and manufacture of small precision parts. Our benchmark is both the functionality and the highest quality. We see customer requirements under the historical point of aesthetic quality.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1996
    Certifications
    Our services at a glance
    • high-precision mechanical processing of steel, non-ferrous materials, aluminum and plastics
    • mountable complete manufacturing / assembly of components
    • Clamping tools, machine spindles, dowels, bushings, gauges, screws, etc.
    • Sonderzentrierspitzen: to MC6 in hardened version or with carbide insert
    • Grinding machine spindles (all versions KK, MK, SK, etc.)
    • Cylindrical grinding in wage labor
    • Polishing grinding
    • Repair of machine parts by hard chrome plating or welding
    • Work to model
    • Measuring method: 3D coordinate measuring machine, digital height gauge, hardness tester, surface testing
    • Data: Transfer your data in DXF, DWG, IGES, etc.
    • .. And in cooperation with reliable partners: Production including tempering, nitriding, deep hole drilling, gear cutting, and much more.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1995
    Certifications
    ISO 9001:2015
mehr anzeigen