Manufacture of precision machined parts and milling parts from all machinable materials. CNC turning (up to D 90 mm ​​rod) CNC turning (up to 250 mm in the feed) CNC long turning CNC multi-spindle turning (32 axes) CNC Machining Centers (5-Axis) Batch sizes up to 1000 pieces .... Piece including all subsequent operations up to the assembly In the field of machining there are many different ways of working. One is the CNC machining. Through this method, the milled parts get even complicated 3D contours. The CNC machining is done with machines with up to 8 axes. CNC turned parts can be made of different materials. For machining titanium, copper, brass, plastic, aluminum, stainless steel and other materials are suitable. Rotating parts in general can assume unusual shapes. In particular, the CNC milled parts often see pretty spectacular. Through its 3D contours CNC turned parts have a special effect.The machining is extremely versatile. Machining technology is used in various fields. Lathe parts, especially CNC lathe parts, are very expensive to manufacture. To produce a CNC lathe part, one special machines and more time than the normal CNC turned parts needed. The machining and especially the CNC machining requires a good education in the field. The partially very complex turned parts and just the CNC lathe parts require a tremendous expertise. A single CNC lathe part caused enormous amount of time. For these special turned parts, a particularly accurate work is absolutely necessary. For the purposes of machining are all chip forming materials. Depending on the material, the cutting is performed with different speeds. Are the turned parts made of wood, the cutting is done with high cutting speed and without cooling lubricants.Turned parts made of plastics, however, are processed at medium cutting speed. When machining water or alcohol are used for cooling. A special product from the metal cutting machines is the rotating part. Such automatic turned parts can be made ​​from almost all machinable materials. Just like the CNC long turning parts of the screw-cutting without technical knowledge can not be produced. All machined parts require special machinery for the production. Rotating parts are to be finished by hand hardly. Are the turned parts made of wood or plastic, the machining is possibly still done manually, but with harder materials the use of expensive machining is necessary. To establish automatic turned parts, can not be dispensed with the machines. Automatic turned parts are usually ordered in enormous quantities and from extremely strong materials. Also for CNC turned parts is similar. This machining is simply too specific. CNC turned parts requiring extreme precision. Turned parts of this type are mainly used in machine and plant engineering. These industries would not do without CNC turned parts, turned parts, and the entire range of machining technology. Milling Services, CNC turned parts, turned parts, and just such special products as a CNC lathe part are absolute precision products. As simple as the concept sounds cutting, this process but it is not. Cutting sounds like simple separation that hide behind it but also things like complex CNC turned parts or automatic turned parts, no one thinks at first. Without these highly intricate parts, especially without the screw-cutting work would be impossible in some areas.

Instalo BG Ltd is a manufacturing company already known as a reliable partner in the production of tailor made equipment and metal fabrication subcontracting. The continuous interaction between our R&D, production planning and quality ensures to our customers innovative and winning solutions. Investing in state-of-the-art technologies, modern organization on quality, environmental and safety issues, today we can cooperate with big multinational companies in our markets of reference. In order to meet customer needs we elaborate and deploy ourselves in the following fields: • Subcontracting sheet metalwork • Mechanical and electrical assembly • Design and production of custom-made equipment • Engineering consultancy services Our range of final products are applicable in the environmental engineering sector as follows: • Municipal, industrial and potable waste water treatment plants • LandfillS for municipal solid waste • Steel metal fabrication Our staff expertise gained by practical experience helps us understand every project needs. Therefore we at Instalo BG try to keep high standards in: • Equipment support at design stage in process and engineering matters • Innovative methods and resource flexibility • Processing of relevant engineering documents • Project engineering department equipped by 2D / 3D CAD workstation. • Development of structural projects by means of FEM tools Our machine park works in compliance with environmental requirements with regard to functionality and we do try to use the optimum materials with efficient operation of equipment: • Plasma cutting machine • Laser cutting machine • Deburring machine • Roll bending machine • Bending machine • Welding machines • Lathe, turning and milling machines • Coordinate drilling CNC machine • Cutting machines The goal of INSTALO BG is to provide our customers efficient, reliable and innovative solutions, competent advice and reliable services. Thanks to our skilled staff we are able to propose to our clients experience, knowledge and vision of our design and construction activities.

Technical Trading Dreh-/Fräs-und for sheet metal parts

As a core business field, AHM offers designing and manufacturing tape application machines. Our main product is INTER-HST machine – Cardboard transport, hotmelt and tape application machine. This machine is capable of applying several tear-open-tapes in one pass and hotmelt-glue-lines with silicone-paper-cover-stripes. This machine type is basically used in cardboard packaging industry, or e-commerce trade. https://www.youtube.com/watch?v=3sIQO_x_5XE http://ahm.ba As second business field, AHM offers custom CNC metal machining services: CNC metal miling services and CNC metal lathe machining. Through continuous improvement of production processes, additional training of our employees, implementing ideas from production facilities, new product development, product testing, we aspire to satisfy costumers needs and through all of it grow and develop into recognizable manufacturers in the cardboard machine industry.

As a young and innovative company, we provide customers with our long-term experience and expertise available. As a longtime manager of a medium-sized company, in CNC manufacturing I founded the company DARE Tech CNC precision parts early, 2015. Our production program includes general engineering. We manufacture the item to series according to your specifications and requirements. All work carried out subject to constant run controls and a final inspection. Upon request, we also provide with sample test report. We manufacture: Single and serial parts For complete or part manufacturing sample production assemblies Translation by Google Translate

The many years of experience in machining, sheet metal processing and assembly has continuously developed a strategic foothold Rapid Technic AG. Our expertise, since 2009, the friction stir welding process (FSW), we offer to third party customers. NEWS: Free capacity on our machining centers, Makino A88 + A92 Competencies: -FSW (Friction Stir Welding) Milling Drilling Turning -Gear cutting -Painting Mounting

Since its founding in 1985, the Thomas Samulski GmbH manufactures mechanical components and assemblies. Our range of services covers the CNC turning and CNC milling, and the production of small Schweißbaugruppen.Die assembly manufacturing and 5-axis milling takes on an ever greater role. In close cooperation with specialized partners, our range of services also includes centerless grinding, laser machining, hardening and all common surface refinements such as galvanizing, burnishing, anodizing, painting etc. The Samulski Thomas GmbH supplies a wide range of industries such as mechanical engineering, equipment / apparatus, the testing / measuring equipment, the lighting industry, the construction industry, the automotive industry, as well as tool manufacturers. A team of experienced and motivated staff put us in a position to react flexibly to customer needs. Regardless of whether it is a simple component or a challenging assembly, we provide pre-finished quality. Give us a try!

Develops Jonda metal goods factory GmbH develops, produces and markets since 1954 Sheet metal and metal components for various industries. Covering an area of ​​2500 m², we use the most modern manufacturing methods customized products and assemblies. In our own tooling we manufacture stamping and forming tools for use on our stamping plants. In the field of CNC sheet metal processing, we offer all standard manufacturing processes including the robotic laser welding.

Our company specializes in sheet metal- and profile processing. The latest CNC technologies, software and productivity helping us with high productivity to advance. We offer document processing, laser or water cutting, bending, welding and surfacing including reliable delivery. In addition, we offer experienced German speaking welder, pipe fitter and foreman for pipe assembling. Our employees gained experience on various construction sites throughout Europe, see below www.industriemontage.sk. Our products match with the strictest European standards. The company is certified with ISO 9001: 2015. The main aim of our company Industriemontage is the satisfaction of our customers, especially with the quality of the manufactured products, together with just in time delivery. More about us can be found on our website: www.industriemontage.sk

MetalMab is a Machining company that manufactures precision parts tailored to the needs of its customers and provides engineering services to the industry namely in the development and/or the search for solutions in the market or in need of be developed and manufactured. MetalMab was born from the need to expand the business area of lusomab (www.lusomab.pt), in the scope of manufacturing parts for the precision metalworking industry to meet a market need that had been designed over time. We work with the main objective of providing our customers with a high standard of quality and accuracy in the manufacture of parts with emphasis on total customer satisfaction and strict deadlines. Headquartered in Coimbra Portugal we are connected with the World as partners in the construction of ambitious projects where much more than a supplier companies find in MetalMab a reliable partner and unconditional support in the fulfillment of its objectives and guarantee of deadlines.

Without friction bearing no machine moves. Only the machine and adapted to the requirements plain bearing allows the optimum performance. Therefore, for special machines also often special plain bearings necessary. Therefore we produce for our customers special solutions

Since 2012 Morando combines creativity with steel machining, bringing a freshness into steel production, making more solutions and easier approach for some complex steel ideas turning a complexity into reality. Our Team was created with the desire to offer our customers high-quality service, our daily routine involves searching for best solutions for our customers with all the resources a toady's professionals may need, meeting deadlines and beyond all stacking up on the quality. Morando name comes from our first ever old lathe machine used by our grandparents called Morando, it has inspired us to move forward with the same name. So we are Morando, Welcome!

We offer broad gamut of services in machining. Our main goal is to render services of highest quality in due time. Thanks to our experienced and qualified staff we can take on the most challenging tasks in metal processing and designing. We perform milling services in 3 and 5-axial machining centres. Our offer comprises milling in 3-axial and 5-axial machining centre. Our CAD/CAM department programmes machines based on 3-D models and 2-D documentation using CAM software. High accuracy of machining in 5 axes is guaranteed by DWO/TCPC system, which dynamically shifts the workpiece zero point and controls tool axis location. We import models in the following formats DWG, DXF, PARASOLID, STEP, IGS, STL, SOLIDWORKS, INVENTOR, CATIA.

Since its founding in 1994, we deal with the handling and processing of metal parts according to drawings and specifications of our customers. We offer: - CNC - Turned parts - CNC - Milling - Weldments - Heavy mechanical engineering - Castings - Component Manufacturing - Punching and laser parts All surface treatments and heat treatments we can offer a complete package for you with our partners Our group of companies employs approximately 150 employees in the areas of CNC machining and welding constructions. "FOR YOUR BEST PERFORMANCE" We are an extension of your purchase and take responsibility for your performance

TAŞKIRAN MAKINE was started its production in 2009 with the aim of making machinery. We are working with 8 machines in closed 400 m working area in 2018. By 9-member staff is innovative and customer-focused. The principle of working is innovative and development oriented in the machine sector

CHEER WAY Technology Co., Ltd. YOUR PRODUCT - WE CARE OUR QUALITY - WE ASSURE Established in 1974, Cheer Way is a high precision metalworking company. We supply among other well-known European customers in the motorcycle and bicycle industry. We produce parts for the lighting technology, pneumatics, medical, lubricants and metering systems and components for the automotive industry. The processing materials: - Steel / Stainless steel - Aluminium alloy - Brass - Titanium alloy - POM We stand for customer satisfaction, excellent delivery service, quality and transparent costs (prices). Challenge us. We look forward to receiving your inquiries. Cheer Way Technology Daniel Chang Tina Yang F.,-Juergen Schapper

The company Silcom 1991 founded and is in the automotive industry since Tatig for special purpose machines and a supplier of modules assembly lines. equipment - Incision system with Oxigas, with program control: X axis: 4000 mm Y axis: 3000 mm - Welding system MIG-MAG: maximum character stream: 450A - Circle Bandwerk for cuts: maximum cut diameter: 400 mm - Electric oven for Einsatzhärtungen, Relaxation operations Enthärtungsoperationen; maximum dimensions of treated parts: 1000mm x 600mm x 450mm. - Salt bath hardening system: maximum dimensions of treated parts: 350 mm x 150 mm x 150 mm. - Tanning system: maximum dimensions of treated parts: 800 mm x 400 mm x 200 mm. - Drilling -simple; - Radial drilling: maximum lift on the rotary arm: 1000 mm; - Koordonatenbohrmaschine: X axis: 1120 mm. Y axis: 710 mm Z axis: 630 mm. - Water pressure press with simple effect: force 100 tons. - Lathes - classic - with a processed an average of 650 mm; with a maximum length of the processed portion of 2000 mm; maximum weight of the processed part. 500 kilograms; - Lathes with program control: a processed an average of 320 mm; with a maximum length of the processed portion of 800 mm; maximum weight of the processed part. 200 kg. - Karusseldrehbänke: a processed an average of: 1100 mm with a maximum height of the processed part of: 600 mm. - Milling: horizontal axis: strokes: X axis: 900 mm Y axis: 300 mm Z axis: 300 mm vertical Aches: strokes: X axis: 900 mm Y axis: 300 mm Z axis: 250 mm Bohrwerkartig- with manual control: strokes: X axis: 850 mm Y axis: 850 mm Z axis: 700 mm -With program control: strokes: X axis: 1240 mm Y axis: 1130 mm Z axis: 800 mm - Processing center: horizontal axis: strokes: X axis: 1120 mm Y axis: 1000 mm Z axis: 960 mm vertical axis: strokes: X axis: 1325 mm Y axis: 762 mm Z axis: 600 mm - Surface grinders -Langhobelmaschine: strokes: X axis: 900 mm; Y axis: 300 mm; Maximum height of the machined part: 300 mm With turntable: Translation by Google Translate

More than just rubber: Your source for the technical implementation of sophisticated ideas of elastomers and thermoplastics. As an international company, we are specialized in these segments and are the right address for demanding tasks. And there is especially interesting where others stand on the hose: for difficult requirements, special quantities, special series, special materials, customized solutions. Together with our customers we develop product ideas and realize them from the initial sample to mass production. Our consulting services range from the choice of materials to the construction and application techniques. An integrated performance for the period of high claims. Molded rubber, molded rubber parts, plastic injection molding, injection molding, rubber profiles, profiles of rubber, plastic profiles, plastic profiles, rubber to metal bonding, rubber-metal buffers, molded hoses, elbow hoses, rubber hoses, rubber hoses, plastic hoses, plastic hoses, stamping parts, turning parts, milling parts, power transmission, timing belts, V-belts With our own manufacturing capabilities and alliances with manufacturing partner companies, it is possible very flexibly to our customer requirements. Step into the world of rubber and plastic technology!

Galaxy Plaza Ltd. is a Bulgarian privately-owned company, established in 1996. It maintains constant growth since its foundation due to its professionalism in the services offered, innovative approach, strong market presence and its reliability. Our core competencies include technical development, production and installation of bespoke furniture mainly for shops and hotels, according to customers’ blueprint. The company is able to achieve flexible, short terms of production due to the combined and perfectly coordinated efforts of the separate production teams. Our in-house production facilities are located in Vratsa, on a total area of 5 000 sq.m. In the realization of the projects we use cutting-edge technology, and our machinery is supplied by the world’s leading manufacturers of wood and metal-processing equipment. Depending on our clients’ needs, we can offer sample and prototype production, production of items in small or large series, as well as bespoke smaller projects and rollouts, mainly in the high-end sector.

The vital link Operating an international network of facilities and serving a wide range of industries including aerospace, defence, automotive, power generation, oil & gas, construction, machine building, medical and transportation, Bodycote is the world’s largest and most respected provider of thermal processing services. These services are a vital part of any manufacturing process and include: - Heat Treatments - Metal Joining - Hot Isostatic Pressing - Metallic, Ceramic, Cermet and Organic Coatings Thermal processing is a vital part of any manufacturing process and includes a variety of techniques and specialist engineering processes which improve the properties of metals and alloys and extend the life of components. Without heat treatment aircraft engines would not last a single flight and car gearboxes might only last a week – if you were lucky. Without hot isostatic pressing the risk of catastrophic breakdown of metal components would be far greater and the carbon footprint of power stations would be dramatically higher. Without coatings, construction fixings would rust away and thousands of everyday objects would quickly lose their shine. Peace of mind for manufacturers for over 30 years We never forget that our customers have invested time, money and resources in all the components we process, which is why quality comes as a standard part of our service, ensuring that all our customers’ components are treated with care throughout. Our facilities hold numerous international, national and customer approvals appropriate to the services they offer and the markets they serve. Bodycote’s quality management systems, validated by major engineering OEM’s, have been developed to meet the requirements of both ISO 9001 and environmental standard ISO 14001. Additionally, market-related standards such as AS 9100 for aerospace and TS 16949 for automotive have also been incorporated. Bodycote has also gained the prestigious Nadcap accreditation at a large number of locations throughout Europe and the USA, as well as approvals from major aerospace companies and their supply chains. Additionally, our transport services are linked with process and production controls to deliver optimum logistics solutions for supply chain customers. Our customers can be confident their demands can be met, however stringent, with assured quality, cost-effectiveness and on-time completion every time.

We are a small family business. The beginnings of business go back to 1998. In the beginning it was a sideline, and in the course of time we changed in 2013 to a limited liability company, Oravec KOVO, sro We have built a new production hall that is fully air-conditioned for the production of precision machinery parts. All machines are equipped with a smoke extraction system. Each machine has a lifting device of up to 500 kg. Owner is Dalibor Oravec. The company has 100% Slovak capital and is owned by a partner. There are currently ten employees. In cooperation we offer all surface treatments. The company focuses mainly on small batch production and the machining of smaller weldments. The business is: - metalworking - Metalworking in a simple way - purchase of goods for sale to end users (retailers) or other entrepreneurs (wholesale) - Commercial intermediation - Brokerage services - production activities - Production of simple metal products - manufacture of machinery parts for economic activities

RMC is a romanian company, established in 2005, having the core business in laser cutting of metal sheets and pipes using state-of-the art TRUMPF technology. The laser technology that is used allows for the most complex patterns of cutting for steel, inox, aluminium, coper and braze. Laser cutting can be 2D (METAL SHEET) as well as 3D (PIPES). Laser-cut objects can be bent on abkant , equipped with a full tool box. Abkant bending is done for carbon steel, inox steel and aluminum. FLAT SHEET and PIPE CUTTING ● ABKANT BENDING ● COPPER and BRASS CUTTING ● FLAT SHEET CUTTING Cutting formats 4,000 X 2,000 mm 3,000 X 1,500 mm Thickness of the materials cut 25 mm for ALUMINIUM, CARBON STEEL and STAINLESS STEEL 10 mm for BRASS and COPPER. Cutting precision +/- 0.2 mm PIPE CUTTING For diameters ranging from a minimum of 20 mm up to a maximum of 210 mm Thickness of the materials cut 12 mm for STEEL 5 mm for STAINLESS STEEL 4 mm for ALUMINIUM ABKANT BENDING For the following materials: CARBON STEEL, STAINLESS STEEL, ALUMINIUM, BRASS, COPPER Bending force Bending length Distance between columns 135 tF 3,050 mm 2,600 mm 230 tF 4,000 mm 3,700 mm From August 2015, RMC operates in a new own factory, nearest Bucharest. Own industrial premises of 1,900 sq.m., on the northern ring road of the municipality of Bucharest, in a modernized district, with easy access to the highways A1 (Bucharest-Pitesti-Sibiu-Nadlac), A2 (Bucharest-Constanta) et A3 (Bucharest-Ploiesti-Brasov). The new location allows for easy access of vehicles coming to collect cut and bent products, irrespective of their tonnage. Starting December 4th 2015 our company received TUV certification as a ISO 9001 Quality Management service provider.

NG Metal is specializing producing metal component for different industries. Mild steel, stainless steel, aluminum. We have production in Denmark and in Ukraine, 50 km to Polish border.

We are suppliers "historical" Customer paramount operating in various sectors. Especially in the field appliances boast ten collaborations that, in some cases, exceeding 40 years. Our specialization is to provide the customer a 360 degree service from the idea or project / co-project, the construction of molds-equipment manufacturing to delivery of the finished product. Among our main products we veneers of each type and material, balancing hinges for kitchens covers and flush, aesthetic parts, electrical connections and moving joints. Our fleet, as well as several presses (up to 200t), two wire erosion, a plunge erosion, a business center and a variety of other machine tools, also has two assembly units designed and refined internally in the company specifically dedicated to realization of particular assembled groups. We are certified ISO 9001 since 2007, we design with the latest applications (Creo PTC) and build our internal molds, equipment and assembly machines with which we produce the finished product.

Is there a general contractor in sheet metal processing, we are determined to do so. With a current team of 50 employees, we process customer orders from the simplest to the most complex part of laser welded construction. This chrome steel, aluminum and steel with certified welders according to SN EN 287-1 / 9606-2 and EN 15085 C2 and where required including dye penetrant inspection PT2 In our own modern mechanics, we are up to 4 meters in length to work in a position with the 5-axis machining center workpieces in very high precision. New 2011/2012 - 5-axis high dynamic Fräszenter - Profiling Machine - CAM System - Laser engraving machine - Bending cell - Adhesive Standard DIN 6701 - ISO 14001 - Water-jet system In the field of mechanics since mid-May 2011, a new high dynamic 5-axis Fräszenter in use. Dimensions 650mm X 650mm Y 560mm Z with a 18 `000 r / min. Spindle. In January 2011, our new aluminum profile milling machine went into operation, so that we are able, profiles with 200mm and a length up to 4m, 3-sided to work in one setting, includingautomatic Spannpratzenverstellung. Due to the continuous development of manufacturing, was invested in January 2011 in the latest CAM software Mastercam X5 version. Set with light characters, from July 2011, we can on your own laser engraving machine stable and permanent markers ready to virtually all materials. The integrated rotary axis also labels on round parts can be made. Whether engrave, erode or occasion colors, for every application the right label. In the field of identification or traceability, opened up by the engraving of new possibilities. The fastest bending robot in the world, since 2012 in use in our mail. This bending cell trump raises the bar for the robot bending in new level. In Switzerland, we are the first company where the technology is in use. The implementation of the adhesive according to DIN 6701 standard will be completed by the summer of 2012, the audit is in autumn 2012 With the introduction of the adhesive and the environmental standard 14001 standard is introduced. In the summer of 2010, we were able to take our new waterjet system with 2 cutting heads operating successfully. Compared to the previous system, a productivity increase of 30% could be realized. We hope to have piqued your interest, and we look forward to your inquiries, give us a try. Best Regards Hansjörg Marton CEO / Owner

• CONSTRUCTION • PRODUCTION • INSTALLATION • SERVICE • We are a family owned and powerful system provider with more than 30 years of expertise and experience. We offer design, production and manufacturing of equipment, assemblies, sheet metal parts, plastic parts and assemblies for a variety of industries and markets. Product range:

• Machines and equipment for X-ray technology and reprographics, medical diagnostics, medical devices, film development, photo development, IT industry, printing systems, textile processing.
• More product range for the general Machinery and equipment: engineering, equipment manufacturing, acquisition of outsourcing projects, assemblies, assembly, installation works of mechanical assemblies, component manufacturing, OEM products, cable assembly, stamping parts, laser machining, sheet metal, sheet metal parts, sheet metal parts, CNC sheet metal, sheet metal components, plastic parts, plastic processing, plastic welding, deep-drawn parts.

Medium-sized enterprises Specialized in professional sheet metal working - Laser sheet blanks - Blechabkantantungen - Mechanical machining