C. Melchers & Co. was established on January 1, 1806 in Bremen, where the global company still maintains its headquarters to this very day. In the first few decades of the company’s history, over 30 ships sailed the oceans of the world under the Melchers flag, linking the ports of Europe, America and the Pacific. In the 1860s, C. Melchers & Co set up operations in Asia, where all its trading interests swiftly moved. At the same time, with the onset of steam ships, it abandoned its own shipping business to devote itself entirely to extending its trading operations. 1866 saw the establishment of the first branch in Hong Kong, in the wake of which China began to develop into a key lynchpin for the company’s business. The ensuing decades were a period of rapid growth for Melchers in China, with over 2,000 people employed at 12 branches and plants throughout the country. The First World War proved to be a setback for business relations, although business quickly recovered. It was not until the end of the Second World War in 1945 that business came to an almost complete halt. Even so, the company continued to survive, re-opening its first branches in Hong Kong, Singapore and Kuala Lumpur in the early fifties and gradually extending its branch network across Asia. Following the opening of the Chinese markets at the end of the seventies, Melchers set up branches here again, underscoring the significance of Chinese business for the company. With the establishment of a branch in San Francisco in the early eighties, the company also started to engage in US-Asian trade so as to gain a share of the rapidly growing trading relations between these two regions. Trade with China remains a key focus of the company’s overall business, comprising as it does imports of special natural products and finished goods on the one hand and exports of plant, machinery and supplies for the Asian industry on the other. Yet, business with South East Asia has since also come to the fore, with the company amassing broad-based expertise in marketing and selling consumer goods in particular. There are special departments for each article group in Bremen as well as at the foreign branches. They work largely independently within the overall company and are staffed by highly qualified experts. Over 1,000 employees in Germany and abroad assist customers and suppliers with their specialist knowledge. Rather than being based at the company’s headquarters, most of these employees are now stationed at subsidiaries, something which in turn reflects the company’s further development and the strategic alliances which it has forged.
    > Go to profile
    Employees
    > 1000
    Year of foundation
    1806
    Certifications
    PTC Bausch Kft. is a service provider for the development of production from prototypes and small series to mass production. We optimize the item with the customer and further develop the required tools and implement the production process. We manufacture parts for the automotive and household industries as well as for other industries, reinforced and unreinforced with all common thermoplastics. Our partner, the development company PSC GmbH from Austria, is also developing materials specifically tailored to the component that are not available on the market. We also make joint developments from the customer's idea to series production.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    2013
    Certifications
    IATF 16949:2016
    Product development (incl. Rapid Prototyping) Mold Making (Tooling) Precision Plastic Parts
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1952
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    ALLTECH SRL
    Technology: Development and production of injection molded parts from plastic materials, polymers, rubber and engineering plastics. In the machinery you will find u.a. Injection molding machines for two-color and multi-component injection molding, we also have the patent for the UICEG process In order to be able to offer our customers a ready-to-sell product, the devices of the manufacturing process were automated with the help of robots and manipulators and completed with equipment for decoration, cutting and packaging (blister packaging). From the first approach to the planning, our customers are accompanied by professional third parties, if necessary also with graphic and 3D drawings (CAD-CAM), in order to obtain the desired product in the best possible way by means of appropriate material studies (if necessary a formulation for specific materials is developed). as well as the support in the production of the tools (molds and others) to be able to realize. The aim is to receive a handcrafted product that meets market and / or customer needs.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2010
    Certifications
    IATF 16949:2016
    Seal’s System has been specializing for over 30 years in the production of "customized gasket" (washers, membranes, grommets, lip seals, etc…) made of rubber, liquid silicon (Whamera) and plastic material. Available compounds are the following: Nbr, Epdm, Vmq, Fkm, Fvmq, Epdm, Nbr, Sbr, Hnbr, Acm, Nr. Thanks to an historical collaboration with the compounders here in the surroundings we can use materials compliant with the main international norms (WRAS, UBA, KTW, ACS, W270, etc..). Furthermore, basing on specific customer’s requirements, we can develop ad hoc compounds. We supply our product all over the world and here below are listed some of our sectors: PUMPS and VALVES for GAS and HYDRAULICS AUTOMOTIVE HOUSE APPLIANCES MEDICAL STUFF LIGHTING IN / OUT DOOR AUDIO FLOW REGULATOR DEVICES GASKET FOR SPECIAL APPLICATIONS. All products are developed according to ISO 9001:2015 and we are getting the IATF 16949:2016 certification. Please see our product range through this link www.sealssystem.it For the following fields: Braking system Automotive Automotive lightning Plastic electric appliance Acoustic Sanitary Gas appliance Filter Oleo dynamic
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1985
    Certifications
    ISO 9001:2015
    Ideas made of plastic — this motto characterizes the demands and performance of our company. Tolges products are therefore used worldwide in many areas of everyday life, trade and economy. For over 40 years, our 75 qualified employees have been providing creative plastic ideas, individual productions and comprehensive solutions — everything from a single source on request. The company's own development/design, toolmaking, injection molding and assembly departments guarantee customers consistently high quality. In our production, we process almost all common and known thermoplastics and elastomers. These include ABS, EVA, PA, PC, PE, PEI, PMMA, POM, PP, PS, PVC, TPE and TPU. Thanks to our work for a wide variety of industrial sectors, we have considerable know-how in the processing of technical plastics. In the 2-component process, a hard component (plastic) is combined with a soft component (elastomer) to form a composite part in a joint synchronous process. This process allows the physical properties (strength, weight, etc.) of materials to be optimally combined. > Machine clamping force: from 25 t to 1,000 t > Spray weight: from 1 g to 8,000 g > Part dimensions: up to 1,300 mm (W) x 2,000 mm (L) > 2-K syringes with plasma aftertreatment > Assembly of components > Pad printing, screen printing, embossing
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1974
    Certifications
    Company Hiplex d.o.o. was established in1992 by Bojan Filipič. Before of founding of his own company, he worked with his father, who started with its own company at 1973. Main activity of our company is the production of technically highly demanding plastic products by injection moulding for well know customers and production of prototype and small series for occasionaly customers. We are producing for companies from electro (white technic, white goods), automotive, medicine and wooden industry. We are specialist for round product like fans , turbine for water pumps, etc. and we have special measuring equipment for this type of products. In year 2007 we moved our production to the new and modern production facilities in Gorenja Vas, where we by our 12 employeies produce our products on 13 up to date injection moulding machines (from 22 to 270 clamping force). At the end of year 2023 we had 29 injection moulding machines and 45 employees.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1973
    Certifications
    ISO 9001:2008
    We are your partner from idea to series delivery As the world's leading manufacturer for the electrical and automotive industries, we supply our customers with high-quality products made of plastic, metal and kinematic components. Since our founding in 1939, we have continuously developed our experience and product knowledge in order to deliver only the best to our customers — quality and precision in plastic and metal. By using modern production technologies, it is our goal to tap into new growth markets and to be at your side as a permanent development partner.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1939
    Certifications
    IATF 16949:2016
    COMPETENCE We have been producing sophisticated technical plastic parts for more than 50 years. We are a competent partner in product development and are used to working in a solution-oriented manner. Thanks to our vast experience, we have been able to apply our know-how in a wide variety of industries. Our customers expect tailor-made solutions, flexibility, continuity and reliability from us. TOOL MAKING During the development of new tools, our technicians, plastics technologists and toolmakers are in constant dialogue with customers in order to achieve optimal results. In this way, customers are informed of the current project status at any point in the development process. For us, quality and reliability start early in the consultation phase and continue through all work steps. ADVICE You would like to take advantage of a personal consultation with one of our specialists. If you need answers about the different production processes, material specifications, 2K or 3K injection molding or you need a functional prototype as quickly as possible, then you've come to the right place. We will be happy to advise you competently in the design of the tools and show you the advantages of the different variants.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1969
    Certifications
    ISO 9001:2015
    As a family-owned company, we have been standing for expertise in plastic injection moulding over 70 years. With extensive technical know-how, we support our customers from part development to series production. But our service goes beyond that - because we want to understand your requirements and offer customised plastic solutions. Together we achieve added value and ensure your success. Welcome to Faust Kunststoffwerk!
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1953
    Certifications
    IATF 16949:2016
    > Go to profile
    Employees
    < 5
    Year of foundation
    2017
    Certifications
    DIN EN 1090

    Watch

    Techpilot Premium Member
    "DSF" UAB
    The company was founded in 2008 "DSF" in North Lithuania is engaged in the manufacture of plastic parts by injection molding. We are happy to share our knowledge regarding the manufacture and design of plastic parts with you so that we can achieve the desired result in an optimal way. Our machinery consists of modern fully electric ENGEL injection molding machines which offer extraordinary level of precision with lower energy consumption and thus the quality and shape stability of the products. We have 1500 square meters of production area. The plastic parts can be manufactured according to our own forms or according to the customer's specifications. When necessary, the appropriate shapes can be manufactured. We back up our quality production with on-going process and operator control. Our services range from the development, construction, production to assembly and packaging. We invite you to know us. Send us an email or give us a call. We guarantee on-time delivery, reasonable prices, high quality and look us in advance to pleasant business.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2008
    Certifications
    ISO 9001:2015
    Since it was founded in 1955, TG Kunststoffverarbeitung GmbH has specialized in the development, manufacture and sale of technical plastic injection molded parts. We offer our customers the complete range of services from the product idea to series production. Thanks to our own tool shop and our many years of experience in the field of tool design suitable for plastics, we can achieve rapid development and market launch times for you. If you already have existing tools and are looking for a reliable contract manufacturer, we will be happy to provide you with our machine capacities and our extensive process know-how in production. Short reaction times, high adherence to deadlines and a high degree of flexibility are prerequisites for our joint market success. You will always be looked after by a personal contact person. Our contract manufacturing produces injection molded parts for a wide variety of industries with long-standing business relationships with well-known companies (e.g.B. Miele, HansGrohe, BSH, BMW, Audi, Bauhaus, OBI, IKEA, Würth) in the: • Sanitary engineering • Home appliances • packaging industry • construction industry • Electrical industry • Automotive industry (2nd tier) • Transport and apparatus castors We meet the constantly changing requirements of our industry and attach great importance to quality, which we demonstrate through regular certification according to ISO 9001:2015. We guarantee: • Comprehensive complete service from development to series production • Fast and competent service • Direct contacts • Fair conditions Your customers demand good performance from you at attractive conditions. Ask your supplier to do the same! Write to us, we are guaranteed to make you an ideal offer: Professional production that pays off for you.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1955
    Certifications
    ISO 9001:2015
    Founded in 1970 by Karl Bräuning and Michael Geske, we have evolved into a powerful, medium-sized company. Continual investment in the latest technologies guarantee high quality to our customers. We are certified according to DIN EN ISO 9001:2008. Your demand is our motivation. Production Whether small quantities or large production runs to respond flexibly to customer needs is our strength. Our modern machinery enables versatile manufacturing methods. Metal inserts, ceramic and plastic mold around is one of them. Dryers, refrigeration equipment, conveyor systems, temperature control and Einfärbgeräte serve the smooth flow of production. We accept all standard thermoplastics. Our own tool to respond quickly and efficiently to changes. Challenge us. From your idea to the final assembly ... We ... are your competent partner. Through our years of experience, we are willing to assume quickly and flexibly in a position to meet your specific requests. Our customers come from the automotive, electrical, machinery, furniture, construction industry and other fields. Our goal is to satisfy our customers. For the love of detail.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2003
    Certifications
    ISO 9001:2015
    Our aim is to create products and process innovations using the simplest methods, state-of-the-art technology and attention to detail. Uncomplicated, fast and precise. We develop and produce innovative solutions for the production of plastic injection molded articles.
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2018
    Certifications
    ISO 9001:2015
    RILPLAST snc is a company active for over thirty years in the injection molding of thermoplastics and technopolymers. Inserted in the dynamic artisan reality of Lower Sebino, over the years the company has developed skills and experience in the most varied sectors of application of plastic, from products for early childhood, to articles in the electrical and electronic appliance sector , from the hospital and medical sector to that of sporting goods, lighting engineering, automotive and food packaging. Having verified how the customer appreciates the possibility of turning to a partner capable of relieving him of the many difficulties associated with the various phases of development and production of the products, the company has already decided for some time to take charge, also through a network of collaborators located in the immediate vicinity of the plant, of all pre and post molding operations. Thanks to the experience acquired, today Rilplast is able to satisfy the customer in all the different phases of the production: from the design to the prototyping and realization of the moulds, from the analysis of the most suitable materials up to the special finishes proposed.The company also offers internally a pre-assembly or/and complete assembly service of the molded parts, both manually and automatically, also with the use of in-house design machines. Certification and high quality of raw materials, use of any thermoplastic material from commodities to technopolymers and a technologically advanced machine park, which includes 26 injection presses with tonnages ranging from 6 to 450 tons fully automated, presses for micro molding and vertical presses for insert overmoulding, plus a whole series of complementary machinery, allow the company to work all the main plastic materials in the best possible way, creating both standard and technical details.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1981
    Certifications
    ISO 9001:2015
    The Brinkmann mold GmbH offers its customers services started with the construction of prototypes, to the realization of complete process chains for injection molding components. Our range includes the development phase, the construction and tool to series deliveries in bulk or small series about our embedded partners. In addition, we support our customers in the procurement strategy to include best-cost country suppliers in the field of tool in order to increase competitiveness. In this section, we work with many years of professional partners and take over the complete technical and logistical management. In the field of injection molding, we process all common plastics in single and multi-component injection molding of products manufactured by A as ABS curtains decor holders to Z as the gear of PA 30% GF. Toolmaking: Construction CAD / CAM, wire EDM, sinker EDM, 3D HSC milling, grinding, assembly, sampling Injection molding partner companies: 60 injection molding machines (20-1000t clamping force), screen printing Sectors: agriculture, automotive, consumer goods industry, furniture industry Delivery program: injection molding and stamping tools, injection molded parts, screen printing, stamping parts
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2001
    Certifications
    Öztug manufactures rubber molded parts (with and without metal attachment), plastic injection molded parts (with and without metal attachment + 2K) and bent wire parts with its own tool shop. We are already working with well-known companies such as Toyota Boshoku ,Webasto Convertibles, Sew Eurodrive , WOCO, Stabilus GmbH, Hydac Filtertechnik, Conductix-Wampfler, Grammer (Bursa) and Kiel. Our services begin with the first hour of development and extend to series production. Thanks to our mold construction, we can produce prototypes at short notice. We are convinced that we are a suitable partner for you with our vertical range of manufacture and our high level of quality. 1990- Esatablishment; machine-free prodcution was realized. 1997- Rubber machinery investments were made. 2002- Toolshop investment was made. 2003- Plastic Injection investment was made. 2005- Production started in NOSAB. 2006- ISO TS 9001 Certificate was obtained. 2007- Production started in Adapazarı. 2011- ISO TS 16949 Certificate was obtained. 2013- Production started in HOSAB. 2018- IATF 16949 Certificate was obtained. 2018- Lean management working was started. 2018- ‘’design Center Approval’’ was obtained from the Ministry of Science,Industry and Technology
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    1990
    Certifications
    IATF 16949:2016
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    Certifications
    IATF 16949:2016
    We are your partner and service provider for model making, model making and prototyping.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2002
    Certifications
    ISO 9001:2008
    Cutting to perfection - in the heart of Germany You are looking for a competent and highly modern partner for the production of machine parts, automotive components, tooling patterns or other components for your products? The NOTHNAGEL technology has specialized as a contract manufacturer for demanding and short-terminated metal parts. Special materials such as titanium and titanium alloys, Ampcolegierungen, high-strength stainless steels can be made accurately. We manufacture on state of the art and new machining centers and lathes Mazak and Makino. Maximum turning diameter of 380mm and milled parts with dimensions 1050x550x510mm can be edited. Fitting tolerances in it5 are process reliability can also be produced for individual parts. Due to highly skilled professionals and use of modern tools we can offer you as best quality at reasonable prices. Also, we provide development, installation, and design of complex assemblies. Through years of experience in the operation of a tool-and a plastic manufacturing, we also offer the complete processing of Spritzgießaufträgen. Starting from design to implementation in a complex, viable mold. By using a Hochgenauigkeitsbearbeitunszentrums Makino Japan, save yourself extra work, such as polishing of high-gloss surfaces. Are possible roughness of Ra 0.2 microns in at HRC64 high precision contours and dimensional deviations in the micrometer range. The maximum form size is 1050x550x450mm. Production of lathes and milling precision parts, 3D machining, grinding work Plastics Processing
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2001
    Certifications
    ISO 9001:2015
    Schreiber Kunststofftechnik GmbH & Co. KG sees itself as a partner for the plastic-compatible development and manufacture of technical molded parts. Through the technical know-how of our employees and the close cooperation between design, toolmaking and injection molding production, we create series-validated, sophisticated tool solutions and molded parts. We sample both small series and series parts precisely and quickly using multi-component injection molding technology. Schreiber Kunststofftechnik is characterized by reliability and flexibility in development, production, customer service and delivery.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2001
    Certifications
    ISO 9001:2015
    Gienne Plast was founded in 1999 by three partners. Together they decided to acquire an important Florentine company in the plastic molding sector. From simple attempts and the will to conquer new sectors and thanks to an acquired training, Gienne Plast has experienced an important growth process. Gienne Plast has expanded its reference sectors from household products to mechanical, medical and electronic products. Our machines are able to print products with a diameter up to 1000 mm, a height and up to 1600 mm a weight of 5 kg. Gienne Plast is able to treat the colors of the products directly on the pigment granules and can also produce molds at the customer's request. Gienne Plast is also able to apply seals in foamed material, gluing and resin coating directly on the components.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1999
    Certifications
    ISO 9001:2008
    The history of KM-SYSTEM, s. r. o. goes back into 1994, when the business entity Ing. Jozef Kráľ KM-SYSTÉM was established. In 2019 KMS-PT, s.r.o takes over from KM-SYSTEM, s.r.o. all previous activities . The company is located in Prešov (Slovakia). It operates in the field of plastics processing with a focus on the plastics injection molding more than 20 years. The main activities are: Manufacturing and service of the molds for injection molding Injection molding of plastic products Multi-component injection molding Reverse engineering: scanning, creating 3D models KMS-PT, s. r. o. company has a long-term experience in manufacturing molds for multi-component injection molding. It has the know-how protected by the utility model for its blow injection molding technology, which allows to use the standard injection molding machine for the production of hollow articles. KMS-PT, s. r. o. company is certified by ISO 9001: 2008. It also has a license issued by the Ministry of Education for work in the field of research and development. KMS-PT, s. r. o. is a member of Slovak Plastic Cluster and the Federation of Mechanical Engineering of the Slovak Republic.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    Certifications
    ISO 9001:2015
    roth mold + automation: unique. precise. turnkey. Your reliable partner for high-precise and turnkey mold & tooling solutions to enhance a unique and efficient series production. As family-owned company with 140 highly qualified employees, a cutting-edge made-in-Germany-production as well as our 24/7 multi-shift operation we are available all around the clock – globally! From the initial request, the concept phase throughout the tool delivery and beyond we are your professional and personal partner. Our long-term experience within multiple industries and for numerous applications ensures our thinking outside of the box. Thus, we are able to develop the optimum and most efficient solution together with our partners – from the first idea, the finalized mold or tool solution until series production and beyond. Roth mold + automation means expertise, know-how and highest quality from one source – and the best thing about it: as turnkey solution! This avoids headaches due to readjustment and running-in times as we deliver our tools ready for series production, which ensures a trouble-free and smooth manufacturing start. unique. Our design engineers and CNC programmers work at 30 CAD workstations consistently with passion and care to detail with 3D CAD systems and state-of-the-art software solutions to transfer ideas to unique series. Our service incorporates mold-flow analysis to calculate cooling, component distortion, shrinkage and cycle times as well as support in product design for IMD- & IML-applications. precise. Cutting-edge production methods, such as for instance the rapid prototyping method and 3D printing, together with well-conceived manufacturing processes safeguard a maximum of efficiency, what reflects in significant added value for our partners. Thanks to our ultra-modern machinery, we work highly efficient with a minimum of manual labor, which guarantees consistent high-quality and highest repetition accuracy. Our fully automated milling line and superior range of eroding and grinding technologies lead to extremely short cycle times with highest dimensional exactness. turnkey. Looking for a new tool that functions smoothly and works most effective from day one? Because of our in-house technical center this becomes reality! From the first functional testing through the qualification phase to the mapping of a series-production process, we create tool solutions fit for everyday operation at our partners’ plant. That’s why we treat the tool optimization with highest caution. Certainly, not everything fits always at the first time, but we are committed to develop turnkey mold & tool solutions, which can be directly started a series production with. As matter of course we accompany our partners even after commissioning of their tools. Our technical field service assists for the whole life cycle time of the tool as competent contact partner – unique. precise. turnkey. Our solutions at a glance: Mold Design & Development • Pilot, pre-series and series molds • Precision in-mold assemblies • Multi-component in-mold assemblies • Insert and outsert molds • Film insert molding (IMD, IML) • Molds with impulse cooling (e.g. Variotherm) • Log-Pack and container molds • Thin-wall technology • Spin plate & cube molds • Stack injection molds • High cavity molds Automation solutions • Gripper and removal systems • Storage devices • Stacking units
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1990
    Certifications
    ISO 9001:2015

    Watch

    SOVIS Ltd
    SOVIS-Ltd is lockal FAMILY COMPANY! safe tradition and a lot of experience producing trough the years over 7000 Dies, 5000 Moulds and 1500 Die-Castings! We can offer on your services 50 years tradition and professionalism in designing, producing, and renovation of: •Dies •Injection Moulds •Die-Castings •Blow Moulds •Injected plastic parts Our Advantages: •High Quality •Short terms; •Possibilities to make an optimize design of the parts •Fast reaction if renovation or maintenance is necessary •Long life of products Our customers can be: •Users and executors of tool equipment •Commercial companies of plastic products •Producers or consumers of plastic details and products
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1968, 2001
    Certifications
    Everything for the success of our customers Since 1993, we convince our customers with many strong arguments: the combined expertise in plastic, plastic assemblies, system assemblies, tooling and services. Not without reason do us both medium-sized companies and large international corporations from diverse industries to appreciate as a powerful partner. Everything from one source As an experienced system partner, we offer you a wide range of tried and proven standard products, customized solutions and comprehensive service. Competent consultants and qualified application engineers guarantee it active, continuous assistance from the optimal choice of products to complete system solutions. Put it all together more You can expect more from us: We develop tailor-made solutions - and across a variety of materials and product groups.Positive side effect: Thanks to this process-oriented approach there is the additional opportunity to create important synergies and possibilities for substitution. Everything you want Behind the terms plastic, plastic assemblies, system assemblies, tooling and services hidden in Siebrecht an enormous range of individual, also safe for you interesting products and solutions. Do the best for yourself what our diverse range. All along the process chain Since in finding solutions in our house, the process concept is at the forefront, it is natural for us to provide our customers throughout the entire process chain - to provide advice and practical help - from the planning stage through to implementation to delivery. Depending on your needs, we agree together with you, our comprehensive services will depend on your specific needs. Everything when and where you want Through intelligent logistics systems and a computerized warehousing, we can easily adapt to your specific planning procedures.An extensive warehousing guarantees for standard parts, a short-term availability. Even e-commerce solutions and EDI / VDA interfaces are on our system landscape at any time mappable. All who trust us The narrow, mostly long-term cooperation with customers from different industries is clear evidence of the reliability of our products and our cross-industry expertise. Priority areas for which we are working: commercial vehicles, automotive, craft, lighting, construction, medical, and much more All you want to know Whatever your requirement - you are in good hands. Personal, competent contacts assure an intensive all-round support and superior service. When you convince yourself of our performance? Discover new potential for your success - with us as a strong partner! We look forward to you and your job.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1993
    Certifications
    ISO 9001:2008
    U. Eitner Tooling, EDM & Plastic GmbH Benzstr. 7 D-64807 Dieburg Ask us! For over 25 years we have manufactured to approximately 1500m ² and bearings on 1000m ² Tool and die All equipment needed for tool available eg Senk - and Wire EDM. Max 3T tool Total weight approx 25 Tools / year Engineering and CNC machining 4 CNC lathes and machining centers 4 Milling: Max X1800 - Y750 - Z750, 3, 4 and 5 axes. Rotate: Max diameter 800mm Plastic injection molding 10 Arburg injection molding machines, max. 150T, fully automated. Automotive, electrical and thermal engineering about 30 million plastic parts parts per year.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1985
    Certifications
    ISO 9001:2008
    www.nico-spritzgiesstechnik.de
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1959
    Certifications
    ISO 9001:2015

    Watch

    CDZ GmbH
    We expert in working on the projects which located in Kaarst (near Düsseldorf in Germany). We are a high-tech enterprise that provides one stop service including product R&D, mass production, sale and after-sales service. Reliable quality, stable function, timely and effective service is our permanent object. We supply our customers' machines from all around the world with our systems and associated components, especially, power train engineering, adjustable coolant hoses, high-pressure coolant nozzles, precision locknuts, tool clamping systems, workpiece clamping systems and also complete centralized lubrication systems. The serial production will be accomplished reliably by our main production and associated companies in the Far East. It is worth to be mentioned that our main production can provide the competitive price for your required components and complete product line. Our main production has been certified to ISO 9001:2008. As support by local qualified and experienced engineers we could check the components and terms of delivery constantly. As support by our warehouse in Germany we could guarantee deliverability accuracy and reliability. The German and European industrial middle class companies, as well as large industrial companies and international corporations trust our quality standard.
    > Go to profile
    Employees
    500 - 1000
    Year of foundation
    1986
    Certifications
    ISO 9001:2008
mehr anzeigen