247 Suppliers found
List
Raster
Map
Sorted by 
Go to watch list 0

    Watch

    Difag AG

    We manufacture since 1938 metal products for technical uses, punched, laser cut, bent, bent, deep drawn, pressed, drilled, threaded, countersunk hardened. Our range includes filter screens with or without borders, disc springs, washers, saddle washers, high precision shims, complicated shapes (with or without bends or deep trains) with total or consequential cuts, etc. We have not formed a department for surface treatments, but thanks to good relations with relevant specialist firms also get this. Punched parts made of all metal or of plastic sheets such as nylon, Teflon, insulation, polyester film, fiber, PVC, laminated paper, pressboard, etc. belong to our product range. Thanks to a large stock of raw materials, with more than 1,300 different varieties or thicknesses we can deliver at very short notice. The tools required for our manufacturing are produced in our own tool shop.We can advise you when planning or designing a part, in order to develop the most economical solution. Our specialty: R total - in the quality design, concentric and flat, of any material suitable for punching, even small series. General Tolerances: + / - 0.05mm. Since we make mostly non-standardized rings according to the special requirements of our customers, we do not hold the finished goods warehouse. Your advantage: It is worthwhile to consider whether twisted washers could be replaced by punched in every respect. In addition to pricing advantages, the choice of material is particularly less concentrated towards higher strength and corrosion resistance. Our viewable and downloadable here (HTML table) tool list (see website) will show you our facilities. This tools not included can be produced at short notice and with excessive costs due to the internal normalization. Ask us. The list (see homepage) contains the existing complete sections that are constantly updated. Moreover, we have for cases where the preparation of a complete section due to small numbers does not justify a large number of simple circular cuts. These can be for diameters over 50 mm within the substance is technically possible in two passes, ie outer and inner diameter punched separately while maintaining concentricity, combine arbitrary. This with a tolerance of + /-0.1mm. Another reason to ask us! Further manufacturing opportunities exist for smaller series from 120 - 1200 mm diameter at a max. Material thickness of 3 mm (circular shear).
    > Read more
    Employees
    Year of foundation
    1938
    Certifications

    Watch

    Heinrich Vormann oHG

    The specialist for welding wire products, wire parts and Technical Springs We bend, weld, rivet in one operation High precision by CNC machines and modern machinery Different surface finishing Environmentally friendly production.
    > Read more

    Watch

    AFK Andreas Franke Kunststoffverarb...

    Business

    AFK is your partner when it comes to Präszisions injection molded parts or completed solutions for thermoplastic applications. Our specialists realize the planning and design, tooling, fabrication and assembly for you. The packaging and shipping logistics round off our service to you. We would be happy to give you a no-obligation consultation. By working with AFK you will benefit from the reduction of costs in the production process. AFK plastic processing plant, designed and implemented everything according to your wishes. We look after you from tool manufacturing up to module assembly. Rounding out the performance of the AFK plastic processing product packaging and shipping logistics. Regular TÜV tests, customer audits and the certification according to DIN EN ISO 9001:2000 continuously ensure the highest quality, safety and hygiene.

    Multi-component injection molding

    A particular strength of AFK is merging several different materials in a work process. Multi-component injection parts * Are versatile * Meet according to their areas of application special demands on function, feel and design * Offer the possibility of the resultant composites either unsolvable or to make movement in opposite directions We construct a suitable solution for every application.

    Injection of all thermoplastics

    Thanks to efficient automation, it is possible to produce AFK plastic moldings from virtually all colors, shapes and sizes. Within one working cycle parts can even be made with complex geometry. A post-processing is not usually necessary.

    Tool design

    Supported by the latest CAD / CAM systems, the AFK team realizes for them the planning and construction of the necessary tools for your product.After the design phase of the affiliated tooling implements the professional preparation of the tools.

    Manufacturing & Assembly of components

    Take also the assembly of components in the home AFK. We add a wide variety of individual components together according to the customer's specifications for the boards and complex systems.

    Ultrasonic welding

    Through our ultrasonic welding process, we enable the connection of various customer products. In order to achieve a good sound energy conversion in the joining zone in component structures, AFK is a special seam geometries in the joint zone. These special seam geometries ensure tightness and durability.

    Quality assurance

    The latest measurement technology and continuous tests ensure the consistent quality of all customer products. The non-contact coordinate with high resolution video projection allows accurate analyzes.

    Distribution logistics and shipping

    The molded parts produced on behalf of customers are on request - delivered directly to the consumer - in original packaging.Delivery routes are thereby extremely shortened. This saves precious time in the production cycle.
    > Read more
    Employees
    Year of foundation
    Certifications

    Watch

    mbv GmbH

    We see ourselves as a service provider of plastic and assembly technology based in Hörstel. Our company provides high quality injection molding products at competitive prices. On our modern injection molding machines, we process all common thermoplastic and thermoelastic plastics up to a shot weight of 1300 grams. From the beginning we take your project and work this closely, most experienced designers and tool manufacturers. We listen to your specific problems and requirements and work with you to optimal solution packages. Furthermore, we provide flexible mounting capabilities in our house are available and take over all activities that are necessary to secure production and quality. We take packaging work of any kind by individual arrangement or customer.
    > Read more
    Employees
    Year of foundation
    Certifications
    TP Suche Banner

    Watch

    RIBATEC

    Drive Technology Adhesive Technology Plastics Technology
    > Read more
    Employees
    < 5
    Year of foundation
    Certifications

    Watch

    Cetinalp GmbH

    The company was founded in Cetinalp Nürtingen 1999. In 2000 the company moved into today's workshop to Frickenhausen - Tischardt. On 10.10.2001, the company Cetinalp structured into a GmbH. Our corporate goal Satisfaction of our customers is the ultimate goal, which is why we always try to put the flexibility and individual customer care at the highest level.
    > Read more
    Employees
    5 - 10
    Year of foundation
    1999
    Certifications

    Watch

    Agya Auto Limited

    We are one of the leaders in manufacturing of Leaf Springs in India. We are suppliers to leading OEMs as well have an established presence in the aftermarket. We are ISO 9001:2000 certified and are in the final stages of implementing TS:16949 quality management system. We can produce leaf springs of all sizes. We have a fully equipped manufacturing facility with walking beam hardening and tempering furnaces, fully automatic hydraulic cambering press, shot peening machine, eye rolling machine, load testing and cycle testing facilities, etc.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1984
    Certifications
    ISO-TS 16949:2

    Watch

    Inoxforma SL

    Since 1967,Inoxforma s.l., has been transforming and fabricating sheet stainless steel. Inoxforma s.l., has ISO 9002, ISO 14001 accreditation and the welding homologation EN 288-3. We undertake work for many leading international companies across European Community. We now wish to expand these markets and into other markets and sectors. We are experts in the manufacture and processing stainless steel products working for various sectors such as: food processing machines, electric- electronics, weighing, valves, decoration... Inoxforma has a modern 4.000 m2 facility equip with the latest processing machinery. Our professional and dedicated staff can offer your business quality products and equality services at competitive prices
    > Read more
    Employees
    Year of foundation
    Certifications
    ISO 14001

    Watch

    A I Mec Com Limited

    Mec Com is one of the UK’s largest manufacturers of specialist electromechanical and electronic components and sub assemblies. Mec Com is a recognised leader in supporting OEMs in the design, manufacture and integration of electronic products on a global basis. Mec Com has developed its services to become a leading UK based strategic supplier of integration assembly and testing for customers requiring total manufacturing solutions. Mec Com’s UK manufacturing resource allows it to supply a cost effective service in the following disciplines: Electromechanical/electronic sub assemblies and test Test equipment design and manufacture Coil winding, transformer assembly and test Sheet metal fabrication and assembly Production and precision engineering Contract manufacturing, outsourcing and integration Global supply chain management
    > Read more
    Employees
    Year of foundation
    Certifications
    ISO 14001

    Watch

    ARCOM INDUSTRIE SAS

    Precision machining CN, CN shooting, HSC milling, microsooudure, laser marking, cutting electro-erosion wire multipin decolletage, assembly Precision screw machining: NC lathes, milling centers High speed, microwelding Laser, laser marking, wire cut EDM, multi-spindles screw cutting, assemblies
    > Read more
    Employees
    50 - 100
    Year of foundation
    1999
    Certifications
    ISO 9001:2008

    Watch

    Salemo e Merca, Lda

    The Company Salemo & Merca Lda, was created in Seixal on 18th of August 1982 in Portugal by their actual manager’s partners: Salemo de Almeida Madureira and Joaquim Elias Sabino Merca. In the beginning the company was turned for the metal assemble of structures and metal-mechanic, and quickly entered in the labour of equipment and components for the electronics industry of high precision and telecommunications. Consequently, with the certification for the products we win a strong position in the sector and a real presence in the market. In the beginning of 90´s, with the development of the activity, the company need to increase the investment, in substructure production equipment. At this turn, we assert in the technological renewal for the labour system, with the insertion of new technological equipment with resource to the CNC (Computer Numerical Control) machines. This Company initiate its activity with a cover area of 100m2 today there’s more than 11.500 m2 and with a total surface of 30.000m2. In 1994 with the problems of physical limitation area, the company bet in the construction of a new establishment in Palmela with a 20.000m2 area, where they level a nave with 6.000m2 of covered area. The investment between 1994 and 1996, allows the company to reorganise his structure, to do new innovating and ambitious projects that as been perspective. This investment was around the 5.000.000 €, which permit a new space and new equipment to the company. One of the new spaces was the construction of an R.W.T.S. (Residual Water Treatment Station), the acquisition of a Zinc Coating Automatic Line, a Punch machine with guillotine, Bending and Lath CNC machines. Therefore in March of 1996, was a change to a new and modern local, full with the most recent productive resources and labour conditions that was decisive to increase national and international market quote.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1982
    Certifications
    ISO 14001

    Watch

    SORIM

    > Read more
    Employees
    20 - 50
    Year of foundation
    Certifications
    ISO-TS 16949:2

    Watch

    Walter Schön GmbH

    The company was founded in Nice from our senior partner, Mr. Walter Schön, in 1953 and has since grown from a one-man company into a reliable and flexible supplier for many German and international industrial companies. We supply to companies such as Siemens and Infineon in Germany and abroad as well as regional low-volume producers with technical precision parts for many applications. Meanwhile, the management to his son Kurt Nice übergegangen.Wir but we are delighted that our senior boss, still with advice and support, even though he had his long deserved retirement. Currently we employ 23 employees, of which about 1/3 in mold and 2/3 in the plastics processing are active. Motivation and quality awareness of all employees, from management through to the apprentice, are our top priority in the pursuit of satisfied customers.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1953
    Certifications

    Watch

    AJC

    AJC offers solutions based on the main manufacturing techniques used in the metallurgy industry such as: Aluminium, Zamak and Brass pressure die-casting Non-ferrous metals stamping Aluminium bronze alloys, aluminium and brass gravity casting. Polishing. Metal surface treatment. Machining, screw cutting, Cast Iron foundry, etc...
    > Read more

    Watch

    SCHERDEL RHONE RESSORTS

    > Read more
    Employees
    Year of foundation
    Certifications
    TP Suche Banner

    Watch

    Zhen Kang Enterprise Co Ltd

    Established in 1996, Zhen Kang Enterprise Co.,Ltd. specializes in the manufacturer of Molds, Plastic products and Stamping metal for industry,agriculture ,commodity and others. Currently, we operate business in Europe,North America and other region.Aiming at innovation, self-perfection, sincerity, strictness and surpassing, we are looking forward to offer our best service to more and more friends in the world.
    > Read more
    Employees
    Year of foundation
    Certifications

    Watch

    Haug & Luithle Kunststofftechnik GmbH

    We take on every task In our permanent welded joints are optimally realized. In virtually all industrial applications have to be welded in an economical way to a lasting connection to some completely different plastics. Offer through rational use of resources we manufacture solutions with high reliability and quality. With our high product and manufacturing Know-how, coupled with effective processing techniques, we implement all customer requirements for degree.
    > Read more

    Watch

    Jiangsu Jiali Hoisting Machinery Ma...

    Our company specializes in manufacturing various types of electric chain hoist, manual chain hoist and related assembly products. TXK brand chain hoists are designed to maximize productivity with fast installation, easy operation and built-in durability. TXK brand chain hoists equipt with advanced design and manufacturing techniques ensure safe operation, consistent quality and longer component life. The Compact and design provides close trolley approaches. Flexibility to meet your exact requirements TXK brand chain hoists offer a range of choices for a wide variety of applications such as heavy industry, transporting industry and so on. After more than 10 years of unremitting efforts, now we have own scientific management systems, high-quality personnels, advanced production techniques and equipments and improved detection methods, Which Contribute to the development of new products. Our products owe good reputation to the follow features:  High performance-to-price ratio  Fast delivery  High safty We persevere with strong points , great effort and originality innovation in order to join in international market. Welcome to contact us and to be our permanent partners.
    > Read more

    Watch

    AB Berglunds Rostfria

    Berglunds is a respected company, founded in 1965, with genuine knowledge in our products. We can manufacture all types of workshop products in materials such as stainless steel, titanium, aluminium, nickel base alloys and carbon steel. Our speciality is one of a kind or short series manufacturing. The products may be entirely of our own design, a design by us but based on customer specifications or manufactured after customer drawings. Our products can be found at companies with high demands on quality, function and accuracy in delivery. The products is often crucial parts in different industrial processes.
    > Read more
    Employees
    Year of foundation
    Certifications

    Watch

    Gerhard Kröger

    Laserbarbeitung
    > Read more
    Employees
    Year of foundation
    1977
    Certifications

    Watch

    UNIT PLUS s.r.o.

    Development and Production of Special Purpose Machines and Installations Our company realizes a number of development orders every year in which the customer´s request is solved with the possibility of an immediate application. The output is mainly the delivery of technologic installations for the customer´s own production Non-standard Cold Formed Parts Metal-compressing Stampings General Engineering Production
    > Read more
    Employees
    20 - 50
    Year of foundation
    1996
    Certifications

    Watch

    2M PLASTİK VE KALIP LTD

    > Read more
    Employees
    20 - 50
    Year of foundation
    1992
    Certifications

    Watch

    VBV PLAST s.r.o.

    Společnost byla založena v roce 1994 a sídlí v Litomyšli v Nové Vsi. Naše firma se zabývá výrobou bazénů, jímek, septiků, vodoměrných šachet a ostatním zpracováním plastů. Mezi další činnosti patří vakuové tváření plastických hmot, výroba světelných reklam včetně reklamní a propagační činnosti. V oblasti výroby zahradních bazénů jsou hlavními odběrateli fyzické osoby. Realizovali jsme na zakázku bazén ze soutěžního pořadu České televize "HODINA PRAVDY". V oblasti výroby jímek, septiků a vodoměrných šachet patří převážně mezi odběratele stavební firmy - Metrostav, Vodní zdroje Praha, Východočeská stavební a.s., Profistav Litomyšl atd. V oblasti vakuového tváření plastů jsou největšími odběrateli firmy Rojek a.s. Častolovice, R.W.T. s r.o. Rychnov nad Kněžnou, SOR s r.o.Libchavy-výrobce autobusů, Daniševský s.r.o. Polička-zdravotní zařízení. V oblasti výroby světelných reklam, propagační činnosti jsme realizovali zakázky pro firmy Panasonic, Technics, Ufesa, Reebok, Moeller, Mungo, Auto Štangl, Autoturist, JVC, Pivovar Hlinsko v Čechách, Pivovar Krakonoš, Pivovar Jihlava, Pivovar Janáček.
    > Read more
    Employees
    Year of foundation
    Certifications

    Watch

    Purchase Turkey

    Purchase Turkey is a project management and purchasing company for European market in Turkey. Our strategy and target is the best quality,cost and timing for customer needs. We have 6 years experience in purchasing and project management for automotive and other industries. Our main experience are stamping,casting,machining,plastic and rubber enjection etc. Other proficiencies are tooling,control fixtures,machinery, assembly lines etc. We have 8 experienced suppliers for all production methodology.
    > Read more
    Employees
    50 - 100
    Year of foundation
    2012
    Certifications
    ISO 9001:2008

    Watch

    LARINES d.o.o.

    CNC machining Welding (WITG/TIG, MIG/MAG)
    > Read more
    Employees
    10 - 20
    Year of foundation
    1991
    Certifications

    Watch

    Blechcenter HandelsgesmbH

    > Read more
    Employees
    Year of foundation
    Certifications

    Watch

    Koller Metallwarenfabrik

    > Read more
    Employees
    Year of foundation
    1960
    Certifications

    Watch

    PLASTIBELL

    > Read more
    Employees
    Year of foundation
    Certifications
    ISO 9001:2008

    Watch

    Akripol d.d.

    > Read more
    Employees
    Year of foundation
    Certifications
    ISO 14001

    Watch

    Jäger Gummi und Kunststoff GmbH

    > Read more
    Employees
    Year of foundation
    Certifications
    ISO 9001:2008
    TP Suche Banner
Limit search by:
Region
Technologies
Materials
Company data
Industries
Certifications