Find Pressing .

The company Otto SPANNER GmbH Our corporate philosophy is more than 60 years of trust and honesty. The know our longstanding customers appreciate: For example, BMW, MINI, Porsche, Rational, AEG, MAN, Faurecia and Webasto. The Otto SPANNER GmbH offers its customers a series supplier of pressed, stamped and drawn parts as well as complete assemblies made of metal a very large range of cooperation. Together with our customers we develop products together further to an optimal price-performance ratio. Our companies are in the German and Slovakian sites a variety of manufacturing processes. We also work in close cooperation with partner companies in order to implement projects with unusual requirements.

Metal spinning: - Diameter of D = 10mm to D = 1'500mm - Material thickness of s = s = 0.5mm to 6.0mm - All metals (aluminum, stainless steel, steel, titanium, silver, gold ...) Deep drawing: - Width across corners component of E = E = 10mm to 1'800mm - Material thickness of s = s = 0.5mm to 6.0mm - All metals (aluminum, stainless steel, steel, titanium, silver, gold ...) Metal spinning: (Http://www.metallumformung.ch/de-de/metalldr% C3% BCcken / beschrieb.aspx) Take advantage of the possibilities of this interesting process. If the metal press used by specialists, achieved by no other forming process particularly for single pieces or small series its economy. Deep drawing: (Http://www.metallumformung.ch/de-de/tiefziehen/beschrieb.aspx) Less is often more! With the possibilities of deep drawing we can produce items where other methods are dependent on the assembly of several parts long. Use this advantage with integrated cost reduction.

In 1877 the company was founded Uebele. Since then the company has grown steadily and today offers the complete program around the punching technique. We manufacture high sophisticated tools, high-precision fine blanked parts, stamping parts, bending parts, stamping and deep drawn parts and metal pressing parts. The assembly production and the production of small and large series are part of our extensive range of services. For our national and international customers, we manufacture complex parts on the following presses: - Deep drawing presses 400-4000 kN (table size up to: 2,000 x 1,300) - Automatic punching 400-6300 kN (table size up to: 3,000 x 1,500), - Fine blanking presses from 1,600 kN to 3,200 kN, - Pressing machine to Dm 900 x 5 mm - Press brakes up to 1,500 mm long Materials / Materials: Steel, stainless steel (1.4301 / 1.4571 / 4310, etc.) and non-ferrous metals such as aluminum, copper, bronze and brass, and substance capable plastics. Sheet thickness: 0.05 mm - 10.0 mm Coil: 300 mm x 10 mm and 1000 mm x 8 mm Product Line / products: Fastening systems for photovoltaic systems such as roof hooks, shielding, Cell connectors, mugs, fittings, spacers, flanges, housings, holders, sleeves, Contacts, discs, covers, clamps, braces, disc springs, angles and gears Toolmaking The following services offered by our professional expert toolmaking: - Project development to series production - Tool design - Prototype production - Construction of composite tools, drawing tools, stamping tools, bending tools, Fine-cut and cutting tools as well as devices Subsequent processing - Vibratory grinding, brush deburring, drums, tape loops with automatic feed - Heat treatment - all standard methods (inter-stage hardening, Nitriding, Hardening, and Nitrocarburizinga) Surface Finishing / Surface coating - Powder coating, KTL, painting - Electroplated coatings of Au to Zn / Ni (chrome plating, galvanizing, burnishing) Assembly production As a system supplier, we offer our customers from different industries all from a single source - from product development to the mounted assembly. - Inert gas welding (TIG / MIG / MAG) - Robot welding - Stud Welding - Spot and projection welding - Pressure joining (Clinching / clinching) - Riveting, caulking, gluing

Over 100 years ago William Pfleiderer founded his metal goods factory in Esslingen am Neckar. Today, in the third and fourth generation, the family supplies customers in the European and East Asian region. Its customers include all branches of industry which use formed without cutting sheet metal components in their products (power tools industry, automobile industry, mechanical engineering). Here the requirements vary from simple to complex stamping assembly. Through our years of experience we are able to meet any customer requirements. We support you in the production-oriented design of drawing, stamping, bending and progressive parts and welding and assembly units and recommend the appropriate starting material. Difficult geometries, manufacturing and assembly groups, small batches, batch sizes with millions of units, tight deadlines, just-in-time, Kanban, safety stocks, are a problem for many others. For Wilh. Pfleiderer means that the orientation of the diverse customer needs.With dedicated employees, particularly flexible production organization and advanced punching and forming, we are prepared for a variety of tasks. Drawing, pressing and stamping parts After drawing, sample or individual information we produce stamped and formed parts of metal (eg steel DC01, DC03, DC04, St, stainless steel 1.4301, 1.4310, 1.4404. 1.4571, brass CuZn, Ms63 copper, aluminum AIMg3, Al 99.5 ) including the complete sequence processing (scrubbing, barrel finishing, grinding) and treatment (hardening, tempering, coating, galvanizing, painting) in the lot size you want. The result is simple washers and brackets to highly precise shifting parts, moldings to the automotive industry and mechanical engineering, complex series of composite parts, cylindrical drawn parts, housing and much more. Assemblies We are the perfect contact for sophisticated assembly and / or installation work. You order a completely manufactured and tested component with only one contact.We manufacture the items, take over the logistics of procuring needed to buy or standard parts and assemble the whole thing. Benefit from our decades of experience in the field of welding and assembly units such as in protective and hoods for the power tools industry. In this field, we manufacture and assemble a wide variety of sizes and designs for many well-known manufacturers. We can do this rely on our large inventory of own drawing tools, cutting tools, jigs, etc., saving you huge costs.

Our company, whose 1,200m2 is closed, serving in a total area of ​​1,500m2, continues to metal processing and shaping works with the knowledge and experience of its founders, today has undertaken to fulfill the requirements of the ISO 9001: 2015 quality management system standard and to continuously improve its effectiveness.

We are a company with over 20 years of experience in the supply of custom mechanical components.(specialized in supplying custom mechanical components with over 20 years of experience.) We take care of your supply needs from the moment we receive your request for quotation until the shipment from our warehouse. Once your request for an offer has been received, we take care of: 1) Identify the most suitable technology to reduce costs and create complex parts 2) Dialogue with suitable and economically competitive suppliers 3) Let us introduce you to our best offer Once your purchase order has been received, we take care of: 4) Follow the sampling and certification phase of the product 5) Manage production advances in accordance with the required timelines When the goods arrive at our warehouse, we will take care of: 6) Perform a statistical check in acceptance 7) Pack and ship the goods according to your needs 8) Manage reorder quantities from a Kanban perspective We can provide finished items that require multiple processes such as: > Heat treatments > Surface treatments > Additional processing (e.g.: assembly, shooting, rectification, etc.) We are able to offer this service thanks to our mechanical and procurement skills, to our structure in northeastern Italy and to a network of production partners present in Italy and Asia. We are fluent in Italian, German and English. Contact us to learn about our team, our technologies and our prices.

Maso attend to direct contacts with the foundries and gives the customer to pick up the possiblity, his requirements for all steel castings as well as Grey cast- and Spheroidal graphite cast iron, Aluminium and its alloys castings directly with it with the supplier in Turkey and China. Unknown intercession offices slip it. As production processes to the disposal are Sand casting -machine moulding, investment casting, die-casting for low, middle and big deries, roughly and ready processes. Maso takes over the first sample care until the series maturity. The customer can order directly after it. The same profile offers Maso for drop forged parts, sheet metal stamping parts and vehicle rims.

As a system supplier for electromechanical assemblies, we manufacture plastic and metal components using hybrid technology. This means that we concentrate on the production technologies of plastic injection moulding and punching and bending of metal components. The advantage for you is that you can obtain ready-assembled assemblies of the most diverse production processes from one source. By moving Friedrich Joerg GmbH in 2016 to newly built production and office premises, we were able to create a capacitive buffer. Thanks to a high degree of automation, we can offer you particularly competitive prices. We manufacture manually in small series up to large series fully automated and pre-assemble all components for you. In short, we adapt flexibly to your requirements. We provide support as early as the product development stage in order to take into account quality, cost and tool-specific aspects in the early phase. We manufacture the necessary tools or devices in our own tool shop. This also allows us to increase our flexibility, for example in case of short-term changes. Furthermore, we also offer finishing processes such as: printing on plastic parts (cliché/pad printing), hot foil stamping for a particularly noble appearance of the products, machining and ultrasonic welding. It goes without saying that we are certified according to ISO 9001:2015 and deliver a very high and consistent quality. We would be pleased if you contact us. categories: Electromechanical assemblies; Foil hot stamping; Customised plastic mouldings; Plastic optical fibres; Optical fibre components; Optical fibre systems; Optical fibre technology; Optical fibre transmission systems; Pre-assembly Assembly of small parts for industry; Assembly of plastic components; Assembly of mechanical components; Stamp-bending parts made of stainless steel, non-ferrous metal, steel; Stamp-bending tools; Connectors; Connectors for surface mounting; Complete plug connections; Pad printing; Thermoplastic precision mouldings; Thermoplastic overmoulding with plastic; ultrasonic welding of plastics; overmoulding tools for insert parts; 3-D MID components; connecting terminals for power cables low voltage & high voltage; component assembly; die casting; mould making; housings for the electrical industry; terminals for electrical cables; plastic injection moulded parts; plastic injection moulded parts with metal insert; electrotechnical plastic parts; technical plastic parts; plastic processing; multi-component injection-moulded parts; plastic-injected metal parts; product development; prototype construction; terminal blocks; technical injection-moulded parts; thermoplastic elastomer (TPE) moulded parts; jig and fixture construction; toolmaking; two-component injection-moulded parts; Imprint: https://www.friedrich-joerg.com/kontakt/impressum/ Privacy policy: https://www.friedrich-joerg.com/kontakt/datenschutzerklaerung/

You would like to make metallic components additive? Are you interested in the possibilities of this technology? With the additive manufacturing of 3D-printing metal (SLM, Laser-cusing®, DMLS etc.) we offer you a production technology that is no longer used only in prototype production. This process offers completely new possibilities where conventional processes such as laser cutting, turning or milling reach their limits. This is a process that is used exclusively for the production of metal. As with 3D printing, the components are built up by layer-by-layer build-up and fusion of metal powder; the component has almost identical mechanical properties to the original material. You need support in implementing your automation project? Then you are exactly right with us! We realize complete manufacturing cells according to your idea. From the feasibility study on the construction and assembly to commissioning and on-site support, we are the right partner for your project. In particular, we cover the following areas of responsibility: - Project Management - Programming - 3D printing metal (additive manufacturing) - Security management - 3D scanning - Milling technology - Construction - Assembly - Hose packages - Service - Training Our 3D metal printing services at a glance: - construction work (cooling ducts, component optimization, etc.) - Checking the cooling channel design (flow simulation, thermal images, flow analyzes) - coatings - Plastic prototypes - Component measurement - Creation of plastic models - 3D scanning / reverse engineering - fine machining (milling, grinding, eroding etc.) - Surface treatment (anodizing, electropolishing, etc.) - hardening - welding

SYS Pres company is metal fabrication company which spealizes in laser cutting, laser welding, welding, bending, and surface treatment operations. Surface treatments are automatic sand blasting, zinc plate, copper plate and etc. SYS Pres company's facility is 3000 sq. Our export countries are Austria, Germany, England, Netherlands, Belgium, Israel.

What one associates with us:

Glatec is your reliable partner for manufacturing subassemblies from metal. Glatec collaborates with companies from the electronic, machine building, home appliance and furniture industries. Glatec is one of the leading producers of fittings for beds and kitchen appliances in Europe. Our production is set up for manufacturing components and subassemblies in order quantities from 5000 to 500’000 articles. This allows us to react promptly and flexibly to your requirements. We focus on processing sheet metal, varying in thickness from 1 to 5 mm, coils up to 400 mm wide. We operate three automatic feed presses with a pressure range from 630 to 2500 kN. For separate operations, presses varying from 100 to 2500 kN in force are available. Stamping, bending and progressive dies are designed and produced in our own tool making shop. We also produce our automation solutions inhouse. For quality assurance 3D measuring equipment is available in-house. All CNC controls are linked into the company network. Programming of the machines is done with NX CAM Express.

Hans Breuckmann founded our company in July 1966. In his one-man operation, he manufactured permanent mould casting parts from brass and silicon tombac in self-built furnaces. He gathered extensive practical experience while working as operations manager in a leading medium-sized enterprise. We are now in our second generation under the leadership of Volker Breuckmann and work with 80 employees to achieve joint success. The traditional permanent mould casting process has been supplemented by pressure die casting technology for heavy metals. Our range is completed by in-house mould construction and toolmaking, CNC machining technology and HSC milling technology. We are able to cover a complete work cycle with all required production steps, from designing a cast to mechanical processing. This provides us with direct access to all departments, which guarantees high quality and flexibility. The die is already cast for the future of our traditional company. Following his apprenticeship, Michael Breuckmann will join the company and follow in the footsteps of his grandfather and father, thus bringing the company into its third generation.

1872 from an idea a reality. With the production of locks, Africa godfather and machetes, the company founder Heinrich Schmidt took the plunge into self-employment. The company produced for the domestic needs and for export to the whole world. The delivery was carried out under its own and also under the trademark of exporters. 1925, the mainstay of Agricultural Engineering was established. In particular, agricultural wear parts have been made for tillage. These were among other things, grubbing shares, cutting blades, angle coulters, ridging etc. of the leading manufacturers of agricultural machinery. In the whole of Germany and western Europe were and are these products their application. Since the 60s, the range has been expanded by the introduction of the Sheet Metal and processing and the production of animal traps of all kinds. The pressing, stamping, punching and bending parts are produced mainly according to customers drawings and samples and finished or coated as desired. Our forward-looking machinery is constantly being improved by new machines. The guarantees with experienced and trained personnel for highest precision and quality in the entire manufacturing spectrum. Through our research and development department, the products of a design verification are subjected. Here, the product or the working process is developed as needed. In August 2008, we have our machinery increased by 2 other press lines. Press forces up to 400 tons. and a material width up to 500 mm are no problem now. This also sets with up to 100,000 pcs delivery lot can now be made efficiently.

IV Metall is an owner-managed, independent company. The location in Nachrodt-Wiblingwerde in Sauerland characterizes a traditional, regionally producing but also a modern, globally operating company. Our benchmark is the market with its requirements The main area of responsibility lies in the design and manufacture as well as in the trade of technical springs of all types. From layout and calculation, to sample delivery and series, including all the documents required by the customer, delivered in the packaging you require. We earn the trust of our customers through the quality delivered and the service provided. This gives us the chance to win new markets. Traditional values determine the behavior of management and employees. Mutual trust, fairness, respect, reliability, honesty and personal responsibility are company philosophy and lived reality. We are aware of our responsibility and obligation to our employees, business partners and market participants and aim to continuously develop the company, to maintain the company's innovative strength and to ensure the social security of our employees. The result of our good work should not be defined solely by the increase in growth and prosperity, but we also want to burden our environment as little as possible and be socially committed.

YOUR GENERAL CONTRACTOR FOR FORMING and MOLDING! FORGING, HOT PRESSES KALTFLIESSPRESSSEN, FREE FORM FORGING IN STEEL, STAINLESS, ALUMINUM, BUNTMETALL, TITAN, FLANGE, RING, TRIMS, Longitudinally PIPES, FEINGUSS, SAND CASTING, DIE CASTING MACHINING PARTS OF FORM PART, OR FROM THE FULL PROFILE

The program. Successful. In the stamping and forming technology, we develop and produce

the highest quality parts

excellent tools

individual technical solutions.

For decades we have been supplying global partner with best quality. Also known customers from the automotive industry value our precise work and our great quality awareness. The roots. Robust. The stable roots of Josef Hafner GmbH go back 60 years. Since then, the company has not only grown steadily, and the know-how has been expanded constantly critical.

Planning - Prototype - series production You need a case for your electronics? Your display requires a mounting frame? They would like to adjustments in a standard housing? - With us you are right! Latest machines and controls, as well as highly motivated and well-trained technicians, ensure constantly for the top quality of your items. Our range of services: - Construction: 2 CAD-CAM-jobs with Autodesk Inventor, specializing in aluminum front panel and metal housing; 3D Kontruktion, sheet metal processing, manufacturing drawings, parts lists - CNC Machining: Alzmetall CS 1000 3-axis machining center and MakinoPS95; equipped with vacuum clamping technology 700x500mm, tool-laser measurement, infrared 3D touch probe; machining of aluminum, plastics and non-ferrous metal - Connection type: Haeger insertion machine 618 for pressing all PEM self-clinching fasteners - Surface tech

The UBB Forming Ltd. is manufacturer of high quality stamped and formed parts for various branches of technology. A focus is technical fixing and soundproofing systems for heating, air conditioning, plumbing, and ventilation industry. From design to finished product, we offer the complete chain from a single source. As internal processes we perform punching, forming, forming, robotic welding, surface coating, assembly and logistics of itself. Our products are top quality branded products, ranging from the pipe clamp to the design of complex pipeline routes.

Stamping and forming technology Toolmaking Assembly production

The medium-sized enterprises THIERBACH from Lower Hall near Heilbronn supplies Companies from all industries as tailored solutions for the Parts subject. TURNING AND MILLING PARTS THIERBACH processed according to your specifications, all machinable materials, including steel, stainless steel, brass, aluminum and bronze and precious metals and special materials for the aerospace industry. SINTERFACE PARTS For the production of sintered parts THIERBACH used exclusively powder with demonstrated high quality. Depending on requirements, the base material of various alloying elements are added. Formed In the area of ​​formed THIERBACH offers various production options such as cold and hot extrusion. In addition, a mechanical, metal-cutting rework is possible. PUNCHING AND BENDING PARTS In the field of stamping and bending parts offers THIERBACH solutions of metallic and non-metallic materials that are manufactured on CNC machines.In addition, welding can be performed. LASER COMPONENTS In the area of ​​laser parts are available from THIERBACH steel, stainless steel or aluminum products with extremely high precision contours in different thicknesses. CASTINGS In THIERBACH you get castings in all major manufacturing processes: aluminum die-casting, aluminum sand casting, zinc die casting, copper sand castings or precision castings. DEEP DRAWN PARTS THIERBACH provides you with high quality deep drawn parts made of stainless steel, aluminum, brass, bronze, iron, chromium or copper, either as a single function template or as a large series. ASSEMBLIES Not just when you need a single part, but even with demanding assemblies, you can count on THIERBACH: in partnership, economic and logistical point of view. CERTIFIED QUALITY An important part of THIERBACH quality philosophy is the maximum quality assurance in the production of your parts and assemblies. FACTS: QUALTÄTSSICHERUNG - Certification according to DIN EN ISO 9001:2008 - Erstmusterprüfberichtenach VDA - PPAP documentation - IMDS entries - Uniformity measurements - Surface measurements - Length measurements - Measuring equipment management - Sampling inspection according to AQL 1 - SPC tests Possibilities of surface and heat treatments Even when it comes ächen to the finishing of surfaces, THIERBACH provides organizational and economic advantages: Through partnerships with reputable companies you get: - Modern production techniques - Everything from prototype to mass production - Different machining options and THIERBACH all the possible rework and surfaces.In this way long and expensive transport routes and the total cost per piece If omitted significantly reduced. THIERBACH offers: Galvanizing / / Copper Passivation / / hard chrome plating Burnishing / / Gilding Dacromet / / Geomet coating Cadmium / / Nickel Chromate / / anodizing Phosphating / / pickling / / Silver Case hardening / / Inductive Glow / / start / / Slot Embossing / / Bending / / rubbing Lapping / / honing / / punching Engraving / / brushes Polishing / / electropolishing Grinding / / trowalizing Sand and glass bead blasting Flexible Logistics THIERBACH is not content to create the correct part, but is only satisfied when you is this the right time and at the right place. Thus, for example, already taken in the packaging that it contains all the elements for a smooth production: Logo, number, barcode.

Our customers are offered everything they need within our group of companies, all in one basket: from development and project management via the production of tools for plastic and metal fabrication, through to manufacturing the parts. In this way we closely co-operate with our customers in developing functional structural plastic and metal components on the basis of the design, thereby achieving an optimum combination between plan, design, manufacture, and cost structure. The integrated possibilities have enabled us substantially to shorten the project run up to the point of series production. The systems Pro-engineer and Catia, available to our staff, permit the creation of structural components and tools, "in one casting" as it were. Injection Moulds Our staff in the individual manufacturing areas have state-of-the-art technologies and most up-to-date machines (such as 12-wire and 15-wire cavity sinking EDM machines) at their disposal. In producing moulds with a guaranteed number of shots, especially for the automobile industry and consumer electronics, our dictum is precision and quality. This holds true for injection moulds, diecasting, duroplastic, two-component, rotating, transfer and insert/outsert moulds, just as much as it does for two-colour moulds, combinations of hard and soft plastics, automatic wire leads, in-mould decoration, and precision gear wheels. Rapid tooling with the aid of our EOS metal sintering machine M250 Extended makes it possible to produce mould inserts for injection moulds and prototype tools within a very short time. Eighty moulding machines in Vienna and Hungary, with a clamping force of between 25 and 1,100 tons, offer all the possibilities of manufacturing moulded, thermosetting and duroplast, gas-injection moulded, two-component moulded, insert and outsert moulded, as well as in-mould decoration parts. Our machines are equipped with automatic robot systems, and automatic packaging lines complement the production line. Vienna: 3-shift operation / technical products and precision parts with a mould clamping force of up to 500 tons, Hungary: 4-shift operation / technical products and design parts with a mould clamping force of up to 1,100 tons. Your plastic parts are coated in three fully automated painting lines on a water-soluble basis (single-component or two-component coating). Your metal parts are electrostatically painted, from the smallest parts up to housing coatings for consumer electronics.

Rudi Göbel GmbH & Co. KG, based in Helmbrechts, is managed by owner & managing director Frank Pichler. The company was founded in 1957 and, with its three locations and 500 employees, specializes in the production and sale of plastic, metal and silicone solutions. The extensive product range, as well as our own tool shop with over 100 specialists, includes precision components, weight-reduced high-performance components and system solutions for displays and controls. The offer is aimed primarily at power electronics, the automotive sector and industrial technology. The high-quality and innovative products from Rudi Göbel GmbH & Co. KG impress customers from all over the world. In addition, the company offers a comprehensive range of services that combines all development, toolmaking, manufacturing, finishing and assembly work. You can find out more about the services offered by Rudi Göbel GmbH & Co. KG on the company's website.

Our company since its founding in 1780 to the processing of metal and has successfully specialized in the course of the last century, among other things stamping and wire bending technology. Technical possibilities Stamping:  punching machines from 40 to 400 tons of pressure  all material qualities: bright, galvanized, aluminum, brass and stainless steel, from 0.5 mm to 5 mm  plate widths from 20 mm to 450 mm  component connections in the tool (metal and plastic)  sequence editing and Follow-on composite tools  finished catching products  surface treatment Wire bending technology:  different wire bending machines  wire thicknesses of 2 mm to 10 mm  processing of bare, galvanized, stainless steel and aluminum wires  finishing operations: * Welding, chamfering, recesses, threads * Cutting, drilling, crushing, etc.  component connections (metal and plastic)  surface treatment FOX is already active internationally and seeks to improve its national and international presence and continues to edit about potential promising Neumärkte / Neubranchen intense.

What began in 1852 as a bolt forged in the heart of the Sauerland, today offers a range of more than 6,500 products. With our own numerous design and utility patents, as well as patterns provides GAH innovations since 1852! GAH is now a company with about 430 employees, which has five locations on three continents ist.In Germany, Europe and the world GAH has developed into the fourth generation of the successful and expanding Sytemanbieter for commerce, trade and industry. About 6,000 pan-European trading partners trust us every day.

INEX is a full-scope furniture producer with more than 10 years industry experience. For over a decade, we fulfill the highest standards of leading international retailers, consumer brands and furniture companies, with full in-house control of the whole manufacturing process.

Punching and metal forming since 1939 The company was founded in 1939 Hohage in Halver and is still family owned. Since 1998, we develop and manufacture 2,200 m² at our location in Kierspe. With about 20 employees will be produced there in close cooperation with our customers in industry and commercial products of stamping and forming and building hardware and hinges. Lean structures and short information paths lead to customer-oriented thinking and acting. Parts are timely developed and manufactured inexpensively and with high quality standards. Our own design and own tool help to create a quick and smooth transaction. Scharniertiel, hinge elements, Stampings, holder, assemblies, ... Talk to us, we are here for you. Zeichnungsztiele, Stampings, Parzielles fine cutting, tapping, stainless steel parts, Prouktentwicklung, house design, house tool, DIN ISO 9001:2008 In the past we have made: Hinges, narrow, semi-wide, Käntig, Tischbänger, chest straps, Embossed hinges, Profielscharniere, Kreuzgehänge, Werfgehänge, shutter hinges, hooks, brackets, Winkelberbinder, chair angle, wide angle, angle of rotation, furniture elbow, tee-angle, connecting plates, wood connectors, joist hangers, flat connector, elbow connector, box fittings, box handles, container fasteners, box - protective corners,
> Go to profile