Maxfeld Stanzbiegetechnik GmbH manufacture punched and bent parts from steel strip and wire in our own design, production and tool-making facilities. As a full service provider, we offer you holistic solutions for your ideas, starting from expert advice, to the design and development work through to final production. Our product range extends from simple metal manufactures for toy producers, domestic goods and furniture industries to complex, precision parts and high-tech products for use in heavy engineering, the automobile industry and the electronics sector. To this end, we deploy machines from Bihler, Finzer, Mabu and Wafios and thus rely on cutting edge technology without compromises. We pay special attention in our work not only to precision and on-schedule completion of your quality specifications, but also to the use of the latest testing equipment. A team of committed, highly qualified staff in our design, tool-making, quality assurance and order processing departments are just as much the reasons for our success as the deployment of innovative technology.

We have produced some special parts that have been used on mechanisms on the automobile by CNC Lathes , INDEX Automats, and SWISS-TYPE Automatic Lathes. Some parts of car filter , special rivets , special nuts- screws , some parts of hood lock ,some parts of automobile seats are being produced at our production line.Our monthly capacity is 3 Million parts. We are using, 50 tonnes free cutting materail , 7 tonnes stainless steal , 7500 metres tube in a month.

We, the FEBU are a medium-sized company with 29 employees, and headquarters in the industrial area of Burbach – Würgendorf, plant road 19, with direct connection to the A45. The foundation of the company FEBU dates back to 1965. At that time the father of the current managing director Andreas Fey started with the production of punching, pressing and drawing tools, as well as with the production of windshield washers made of metal, in the rooms of his parents’ house. Due to the increasing demand, the constantly growing space requirements were initially met with the construction of a 150 m² production and storage hall in Burbach-Holzhausen in 1970. Due to the further steady growth of the company, the production and storage areas were moved to Burbach-Würgendorf in 1988, not least because of the favourable transport connections. Through expansions in recent years, a total of 5,350 m² of production and storage space is currently available. In the following years the product range was extended in all areas. Stamping technology With the founding of the company in 1965, the production of the first stampings for the company’s own windscreen washers and water slides began. In addition to the production of stampings for the company’s own products, other customers were quickly acquired and sales were continuously increased through constant investment in the latest machines. Thus, the most modern automatic punching machines and eccentric presses up to 200t pressure are available. For further processing, we have welding presses, automatic threading machines, as well as stud welding equipment and various special machines. Here a production can take place on tools manufactured by us or provided by you. Among steel (blank, galvanized + coated) and stainless steel we also process non-ferrous metals. Injection moulding technology With the decision of the current managing director Andreas Fey in 1993 to implement the production of plastic injection molded parts for the ice scrapers and windshield washers in house to be able to react faster and more flexibly to customer requests, he laid the foundation for the current 16 machines comprehensive injection molding production. After the purchase of the first injection moulding machine it did not take long until further articles from other areas were added and the first 2-component injection moulding machine was purchased, first for the production of the first own 2-component ice scraper, later also for further customer-specific articles. Gradually, the injection moulding production was expanded and finally, with the takeover of the company Schmidt Kunststofftechnik (founded in 1955) at the Biedenkopf-Eckelshausen location in April 2020, a second location was added. Toolmaking The in-house tool shop, with which the then founder of the company Horst Fey laid the foundation stone, is still the pillar of all production areas today. Thanks to our ultra-modern tool shop, we can react quickly and precisely to customer requirements and maintain our tools accordingly. Here we design and manufacture punching and injection moulding tools with a tool length of up to 2,000 mm, as well as fixtures and mountings for various machines. Cleaning equipment and ice scrapers The production of cleaning equipment includes the production of metal windscreen washers and water sliders, as well as the production of various plastic windscreen washers and ice scrapers. By investing in the most modern machines and developing our own products and tools, we are still able to produce competitively in this field. Since its foundation in 1965, FEBU has been able to establish itself throughout Europe. The export, also beyond the European borders, shows positive figures. Due to a manageable number of employees the company remains flexible and can react quickly to special customer requirements.

The firm Joh Treschnak was founded in 1978. She pursued from the beginning a two-pronged strategy based on metal products according to customers' drawings on the one hand and thermoplastic injection molded parts on the other. In line with the growing demands in the metal-processing area of ​​our machinery has been steadily expanded. The Ter Steege Groep 2003 took over its long-standing Liferanten and supports the company in their current business fields in full. By moving to the new factory buildings at the site Zollhausstraße 5 in 2004, the company also equips spatially for future requirements For more info you like to see at our presentation.

Manufacturing of stainless steel utensils and containers up to 150 l.

MEGA Int'l in Roermond NL/Neeritter was founded in 1996 as an engineering firm and quickly expanded its portfolio with a large number of trading activities arising from the wishes of customers who, in addition to familiar development concepts, also purchase machine parts, machine modules and even complete machines entrusted to MEGA Int'l. MEGA Int'l Roermond/Neeritter works closely together with a large number of European and Global top producers specialized in a wide range of production and product disciplines that can cover a considerable part of the needs for machine manufacturers. MEGA Int'l is capable of using it suppliers to play an important role in cost price improvement in order to stay ahead of the strong global competition, in terms of price and technique.

Deformation of cold rolled strips with press: In the field of classical stamping production is possible on eccentric presses from 40 to 250 tons, as well as hydraulic presses up to 250 tons. The product size ranges up to about 500 mm in length and 4 mm in thickness. Fine blanking: Fine blanking is a special technology or so-called punching "without air" between the Schneidematrize and the knives (0,5 - 1,0%). This method is especially useful for highly sophisticated products in question, which are dentate different. The maximum length is about 500 mm, and the maximum width of 6 mm. This allows the tolerance of + / - 0.01 mm, a uniformity of the cut edge and the clipping with minimal needle on the edge. Drawing and deep drawing: Deep drawing is a mode of production, with the preparing various hollow shapes such as rivets, drawing dies, industrial electric parts and the like. The diameter ratio to the length is up to 1:2.5. Of course, these products have a smaller extent, forExample up to 20 mm. Screws: TKG doo manufactures screws of the small range in diameter from 2 to 6 mm and using the most advanced technology of cold deformation, which has displaced pivot screws in the world due to their cost-effectiveness. TKG provides doo screws forth in accordance with the ISO and DIN standards. We also produce special screws design according to the plans and patterns in collaboration with technologists and designers of customers. Screws can be thermally edit and galvanically protect, depending on the location and type of operation.

D + M Z��gel GmbH was founded in 1984 in Schiffweiler / Heiligenwald. In 1989, the company relocated to Überherrn / Altforweiler in the industrial street. Since that time our company has grown continuously. Already in the founding year, we became suppliers to the company John Deere, CLAAS and Kuhn. In order to meet customer wishes and requirements, In 1995 our production was extended to 3 halls. In 1996 Rubber Technology became reinsurer of Terex Demag. As a medium-sized company, you will find our products everywhere, where precisely stamped and processed parts made of rubber or PVC for the Industry needed. Through close cooperation with our customers we are able to optimal solutions and dimensionally accurate products - also in economic Respects - to offer. Our expertise, our modern production facility and our high Quality standards guarantee consistent quality and punctuality Delivery of our products. Our quality standard has been decreasing since 2002 DIN ISO 9001: 2008 certified. With our experience and our technology, we are the right competent Partner for your business to meet the challenges of the future to encounter. Our long-standing customers confirm our capabilities grown partnerships.

Our company has a long tradition in the production of different products from different types of sheet metal and wire. The sheet metal thickness, which is processed by us, is between 0.4 mm and 6mm. The main body is between 0.8 and 2.5 mm and wire diameter is between 4 and 12mm. By agreement, we offer a complete solution for your product: tool design and manufacturing, metal working, drafting, surface protection (zinc, silver, coloring, electrophoresis), packing and delivery of products to the desired location.

USE THE RECOGNIZED HIGH QUALITY OF OUR PRODUCTS The name HEIWA Architectural Hardware has stood for over 30 years for reliability, quality and service. Develop even after more than three decades and we are technically advanced, hands-on fasteners and stampings and welded assemblies forth. All products are manufactured in accordance with the highest demands on quality of material and manufacturing quality exclusively in Germany. In close cooperation with our customers we are also complex desires and wishes in the form of individual custom. It starts with the expert advice and the exploration of the possibilities. After a short time we provide you with the pattern and then make your products from a variety of materials here. Our qualified and experienced staff can assist you: - In the assembly of modules - For welding jobs - For Punching - With mechanical operations and always in constant high quality. The in-house tool shop gives us great flexibility and rapid availability in the manufacturing, service and maintenance.

The company VDF Vogtland spring technology is a specialized manufacturing company for - Compression - Extension - Torsion springs - Stampings - Bending parts and - Appropriate assemblies and components. Well-known companies in the automotive supply industry, from the machine and plant construction, as well as for other investment goods rely on our development and production expertise. A tailored package of services rounds off the program for our customers. Recipients of our products are scattered around the world and across the various industries. A major strength of our company is the extensive product range, which allows us to be nominated for many of our customers as a strategic supplier. We are constantly working to ensure our products and services to our customers a competitive edge. We construct the optimal each for its specific application spring for our customers. By as early as possible integration of our technology in the development projects of our clients, we bring our know-how as possible.

The company Brero Engineering Srl was established to meet the needs of worldwide customers in the Tochterfimen Brembomatic Srl and Brembotecnica Srl. Thanks to the support of an experienced engineering team, we are able to handle many machining processes as the prime contractor. In addition, thanks to the mutual trust and the solid partnership succeeds Brero competitive to be (in terms of quality, service and price). The company can deliver in every area of ​​complex technologies with the support and cooperation of competent companies.

WASTEMA International Wastema has it´s headquarter in Veringenstadt on the Swabian Alb Alb. The Town lies in the idyllic Lauchertal, in the middle of Baden-Württemberg the homeland of the poets, philosophers and inventors. Wastema was established in the year of 1955, and is today leading manufacturer of high quality textile machines. Not only our bandknife machines are well-known in the whole world for their reliability. More than 20 years demanding use are for our products no curiosity. In order to constantly improve our products, we have generous development- testing an production premises at our disposal. With modern machenery and an own powder coating plant we achive highest quality standards connected with a flexible manufacturing.

Stamping with tool making and slitting line