1456 Suppliers found
List
Raster
Map
Sorted by 

    Watch

    PMT GmbH

    Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials. We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more! We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2005
    Certifications
    ISO 9001:2008

    Watch

    WKK Kaltbrunn AG

    WKK Kaltbrunn AG - enormously in form The beginning of the WKK Brunn AG is founded in 1967. As a dedicated tooling the company had at that time only one purpose: the production of cutting, bending and forming tools. Shortly thereafter, the fabrication shop was put into operation and some ten years later, the company introduced her first own product. By continuity, innovation and perfection was out of the formerly peaceful Toolmaking a successful SME with about 45 employees.Today, the CHP is an international punching operation with most modern manufacturing methods in the supplier sector. enormously complete - from the first idea to the final series, we offer comprehensive services - Consulting: individual and professional, on-site or at our - Construction: in-house with 3D Autodesk Inventor - Prototyping: short to illustrate your ideas - Tool: for punching tool and teaching building, with modern machinery - Series production: stamping products of all types up to 250 tons of pressure and up to 300 mm width at 3 mm thickness (up to 5 mm after consultation) made of steel, stainless steel, non-ferrous and light metals - Component manufacture: Total manufacturer of your products, automated assembly - Post-Processing: Heat and surface treatments for partners near - Finish machining: by machining (milling, turning, drilling), eroding and vibratory finishing - Did you know? Also welding
    > Read more
    Employees
    20 - 50
    Year of foundation
    1967
    Certifications
    ISO 9001:2015

    Watch

    LSK Stanz- und Presswerk Lindner GmbH

    LSK Lindner manufactures stamped / bent parts and sheet metal components. In the field of metal forming, we accompany our customers from the first idea through project planning and engineering, construction and tool making, prototypes and initial sampling to series production and spare parts supply. In addition to punching / bending technology, CNC sheet metal processing (laser cutting, nibbling and bending) and welding techniques (with robots and manually) are used in production, depending on individual requirements.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1957
    Certifications
    ISO 9001:2015

    Watch

    ABP - Innovative Blechbearbeitung GmbH

    The company ABP - Innovative Sheet Metal Processing GmbH sets with the help of modern machinery and well-trained staff, new benchmarks in central Germany and consider writing. Why we? The site Schopsdorf is a well-situated location directly on the A2 motorway. Schopsdorf located in Saxony - Anhalt at the border with the state of Brandenburg. Galvanizer and powder coater located in the immediate neighborhood. Transport distances are short and thus favorable. ABP sees itself not only as a producer but also as a service provider. We are an advisory tätig, develop individual Kundenlösungen and rely on the latest technologies. We are offering the entire process chain of sheet metal processing in the position to offer our customers. Here, we also rely on strong partners from the immediate region. The mixture of our Fertigungsmöglichkeiten with consistently innovative thinking makes your advantage. -Quality product, flexibility and individuality imprinting our mission statement. We are your partner for their products. We offer: - Laser cutting 2D - Laser - tube processing - Bending / folding - Laser Welding - Robot welding - MIG / TIG welding - Processing in the wage - Assembly production - Individual solution finding
    > Read more
    Employees
    50 - 100
    Year of foundation
    2013
    Certifications
    ISO 9001:2015

    Watch

    Rehm Blechtec GmbH

    Metalworking The manufacture of fabricated metal products for innovative industrial applications requiring the highest standards of quality and absolute precision. to have a reliable partner on the side is more important. Rehm BlechTec has over 25 years specialist in metal and sheet metal processing. Our manufacturing techniques and lasers punching, forming, tube processing, welding and surface treatment is as much as the design and development of customized solutions. For the high-quality metal processing, we have an extensive range of machinery with modern equipment.
    > Read more
    Employees
    50 - 100
    Year of foundation
    2003
    Certifications
    DIN EN 1090

    Watch

    Aloys Kleier GmbH & Co. KG

    The owner-managed company Aloys Kleier is a service company in the field of small-scale component manufacturing, hardware and electrical installation. As a cooperation partner of the industry, we bring by screws, rivets, welding and gluing together on 4000 m² of production space, what belongs together. In addition, our staff have many years of experience in the fabrication and installation of staircases, ramps and railings, pipelines, metal and welded constructions of all kinds Our range of services is complemented take over all activities of a classic Metallic, ie including sheet metal and metal processing including welding, Kant, drilling and sawing and we done quickly and efficiently. The customer gets to us all from one source. We service the products from purchasing to warehousing, manufacturing, assembly, logistics and all emerging problems. Flat hierarchies fast communication and flexible production methods are guaranteed. All orders we carry uncompromising from the complete satisfaction of the client. Partnership based on trust and maximum quality form the common success for both sides and are the basis for a long-term cooperation.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1982
    Certifications
    DIN EN 1090

    Watch

    Hermann Sefranek GmbH & Co. KG

    The company Hermann Sefranek GmbH & Co. KG was founded in 1885 and is now run by the fifth generation. The company is specialized in sheet metal processing. The product range includes parts for suction, ventilation systems, pipes, special sheet metal parts and weldments. The possible processing methods include laser and plasma cutting, punching and nibbling, edges, and much more rounds Are processed steel, stainless steel, aluminum, titanium, copper, and other materials. We are happy to advise you in the design of components or construct them for you. With SolidWorks 2010, we have a powerful CAD system with which we can process all common file formats.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1885
    Certifications
    DIN EN 1090

    Watch

    Bileske GmbH

    We are manufacturing service providers for precision parts in the field of machining technology, as well as the related services. On-time delivery and compliance with the cost factor are a matter of course for us. Our customers, who have been completely satisfied for years, also trust in this. Individual and prototype or serial parts made of any material can be manufactured using modern technology according to customer requirements. Our goal is always to implement projects with the customer quickly, precisely and efficiently. A constant expansion of the machine park and the cooperation with the cooperation partners guarantee mass-blown solutions for the individual requirements of the customer. What can we do for you? We will be happy to make you an offer!
    > Read more
    Employees
    20 - 50
    Year of foundation
    2022
    Certifications
    ISO 9001:2015

    Watch

    Miglio Emilio S.R.L.

    We are suppliers "historical" Customer paramount operating in various sectors. Especially in the field appliances boast ten collaborations that, in some cases, exceeding 40 years. Our specialization is to provide the customer a 360 degree service from the idea or project / co-project, the construction of molds-equipment manufacturing to delivery of the finished product. Among our main products we veneers of each type and material, balancing hinges for kitchens covers and flush, aesthetic parts, electrical connections and moving joints. Our fleet, as well as several presses (up to 200t), two wire erosion, a plunge erosion, a business center and a variety of other machine tools, also has two assembly units designed and refined internally in the company specifically dedicated to realization of particular assembled groups. We are certified ISO 9001 since 2007, we design with the latest applications (Creo PTC) and build our internal molds, equipment and assembly machines with which we produce the finished product.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1971
    Certifications
    ISO 9001:2015

    Watch

    Diedecke Innovation GmbH

    We are your contact for innovative product development and manufacturing in the field of mechanical engineering, metal processing and metal construction.
    > Read more
    Employees
    5 - 10
    Year of foundation
    1997
    Certifications

    Watch

    Arcobaleno Srl

    Arcobaleno Srl is a sheet metal proceeding company that works carbon steel up to 25 mm, stainless steel and aluminium up to 20 mm, brass up to 8 mm and copper up to 6 mm. It has a laser cutting department: 1 mitsubishi fiber ml3015ex-f80 8000w, 1 mitsubishi fiber ml3015gx 8000w and 1 trumpf fiber bright line 5040 8000w. Working range 1500x3000 and 2000x4000. It is equipped with combined laser punching machines: 2 finn power lpe5 with automatic loading and unloading It has a combined shear punching machine and an Amada Aries punching machine. It has an automated bending department: 2 Ras multibend bending machines with automatic loading and unloading system, 1 RAs XLT Bend and 2 Amada robotic bending cells. It has a manual bending service with 35 press brakes with a maximum reach of 4000 mm. It is equipped with the tig, Mig welding machine and electric punching. it supplies the assembled material, the assembly of inserts, rivets, studs, bushings and pins. it can supply painted, galvanized, screen-printed or with different finishes It is certified ISO 9001:2015. its strengths are quickness, quality and competitiveness
    > Read more
    Employees
    50 - 100
    Year of foundation
    1987
    Certifications
    ISO 9001:2015

    Watch

    Kleysenz Technology(Shanghai) Co.,Ltd

    Kleysenz Technology(Shanghai) Co., Ltd. is a professional mechanical OEM (original equipment manufacturing) and ODM (original design and manufacturing) service provider, dedicated to providing industrial design, engineering and manufacturing services for metals and plastics. Our low-cost production capacity is located in low-cost areas such as China, which enables us to provide customers with competitive manufacturing costs. You can also achieve more convenient communication and product delivery through our long-term partner, GENOV Internationaler Handel GmbH in plankstadt, Germany. Kleysenz Shanghai development teams work with customers to ensure that their dreams come true and that their products are of the best quality. Kleysenz Shanghai has a first-class development team that provides unprecedented service and support. We have many factories in China. We can produce all kinds of parts and components for our customers according to DIN ISO and international quality standards. Machinery manufacturing Equipment industry Electrical industry Automobile industry Health industry Our customers are mainly from Germany. With our wide range of products, we can provide you with the best quality single parts, component groups and finished products at the most favorable price. In addition, we offer you the possibility to significantly reduce product costs and improve competitive opportunities. We are happy to create a free and uncommitted offer for you Kleysenz Shanghai - your reliable partner for manufacturing and purchasing in China !
    > Read more
    Employees
    20 - 50
    Year of foundation
    6
    Certifications
    ISO 9001:2015

    Watch

    Ernst Reiner GmbH & Co. KG

    PEOPLE WITH EXPERTISE AND EXPERIENCE As a customer, you benefit from our generation-spanning experience and high quality awareness our specialists, which they continuously pass on in the company and in training. When it comes to tightest tolerances, complex geometries and demanding surfaces, REINER is your contact partner. ZINC DIE-CASTING With zinc, extremely filigree or thin-walled, technically high-quality parts can be cast and a very high degree of accuracy is achieved. In addition, zinc die-casting guarantees high productivity even with small quantities and, thanks to its durability, is a very interesting economic process. At our location in Furtwangen, zinc die-cast parts with a part weight of up to 700 grams cast in die casting machines with a clamping force of 5 to 125 tons. With a maximum clamping area of 400 x 600 millimetres, we cast the alloy Z410. MIM - Metal Injection Moulding In series production, MIM opens up completely new technical possibilities - right up to highly complex geometries and always with optimised cost-effectiveness. Cross holes, internal and external threads, gear teeth and surface structures are easily integrated into the component by MIM. The process combines the freedom of plastic injection moulding with the properties of metals. At REINER, a selection of low-alloy and stainless steels is used here. PRECISION CUTTING with forming technology In the field of precision stamping and forming technology REINER offers a range of processes and technologies for high-precision stamped and bent parts. Fine punching, hydraulic bending processes, NC punching or NC bending are as much a part of this as laser cutting. ASSEMBLY SERVICES Thanks to our expertise and range of services as a specialist component manufacturer, we can also process complete assemblies, partially assembled assemblies, components, system assemblies and assembled individual components for you. A unique selling point of REINER in component assembly is the vertical range of manufacture, which starts with the sketch plan if required. In the in-house development center, engineers are available at CAD stations to work out plans and transfer them seamlessly into the production of the components. TOOLBUILDING We are your partner for mould making, precision stamping tools and devices. The equipment: - CAD / CAM for design and production - sink and wire eroding - Surface, profile and jig grinding - Most modern CNC programming technology - HSC milling - Coordinate measuring technology for form and pattern measurement - Centres for machining - Services from the design to the finished component. In addition to the design and manufacture of tools and devices, we carry out maintenance and repairs ourselves.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1913
    Certifications
    ISO 9001:2015

    Watch

    Net-Components GmbH

    Net-Components GmbH was founded in 2003 by Mr. Dipl.-Ing. Tarkan Peker after many years of experience in drive engineering and transmissions manufacturing. Net-Components is certified with DIN EN ISO 9001:2008. We always aspire toward market driven and customer oriented solutions by means of our acquirements on international market and goal oriented method of working. We are responsive to requests of our customers and always systematically develop new solutions, which are the reason why our market share continuously increase. The development of complicated tasks in mass production, medium and small-series production, prototype construction, to made-to-order production takes place at modern machining centres which assure consistent quality and flexibility according to wishes of customers. We are able to deal with short term as well as long term capital investments toward order situation, therefore we ensure a smooth production in terms of quality, date and cost. To manufacture our products according to safety and environmental friendly operations and to meet the high quality requirements belong to our company’s policy. We strive to lead our customers to better competitive position with continuing advancement and cost effective production. We always aim and attach great importance to education and training of our personnel. They act quality conscious and have an impact on continuing advancement. This is the right place for you, if youare looking for a competent partner in the field of drive technology. As a certified company, we are specialized in the production of turning- and milling parts, casting- and forging parts, laser- andsheet metal parts as well asspecialproductions completeour product range since 2003. With our expertise, we are able to support you during the development phase. Highly motivated, well-qualified staff and most modern production equipments are the basis of our success.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2003
    Certifications
    ISO 9001:2015

    Watch

    Ansla Science Technology Co., Limited

    Ansla was found as we want to make better quality goods and services for customer, we have very professional team and precision production & inspection equipment. All of stuffs have over 10years in the metal and plastic product field, They are dedicated and passionate, can provide professional products, manufacturing services, and can quickly respond to any guest's problems….
    > Read more
    Employees
    50 - 100
    Year of foundation
    2019
    Certifications
    IATF 16949:2016

    Watch

    Tokman Rakor San.Tic.Ltd.Sti

    Our company, was founded as a family establishment with the name TOKMAN TİC. ve SAN. KOLL. ŞTİ. İn 1962. Reaching the year 2007 with a deserved trust and name in its sector through its thorough, serious, and qualified work, it has gone through a series of changes for the needs of the contemporary world. From then on, it would be known as “ TOKMAN RAKOR SAN. ve TİC. LTD. ŞTİ.” to its customers adding the day’s management and quality criteria to its honest and sacrificing sense of service. Firstly, the quality sertificates ISO 9001 and ISO 16949 are gained . Then, in the process of always reaching the best, the approval of AQAP, TYPE Approval Certificate and the Germanischer Lloyd Certificate, which is very significant for us, are our most demanded future targets. In addition to this despite the hard economic conditions, our machine park is given as much importance as possible. TOKMAN, as called by our customers in short throughout years, supports all industries mainly automotive endustry , ship building and earth moving machinery which need fittings . The hoses we work on are air condition, hydraulic, pneumotic, paint, water,steam, food and beverage oil and petrol products, rubber, teflon, stainless steel, certified and high pressure hoses which are used in Shipbuilding Industry.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1962
    Certifications
    IATF 16949:2016

    Watch

    RS Traut GmbH & Co. KG

    > Read more
    Employees
    10 - 20
    Year of foundation
    1997
    Certifications
    ISO 9001:2008

    Watch

    KleRo GmbH Roboterautomation

    You would like to make metallic components additive? Are you interested in the possibilities of this technology? With the additive manufacturing of 3D-printing metal (SLM, Laser-cusing®, DMLS etc.) we offer you a production technology that is no longer used only in prototype production. This process offers completely new possibilities where conventional processes such as laser cutting, turning or milling reach their limits. This is a process that is used exclusively for the production of metal. As with 3D printing, the components are built up by layer-by-layer build-up and fusion of metal powder; the component has almost identical mechanical properties to the original material. You need support in implementing your automation project? Then you are exactly right with us! We realize complete manufacturing cells according to your idea. From the feasibility study on the construction and assembly to commissioning and on-site support, we are the right partner for your project. In particular, we cover the following areas of responsibility: - Project Management - Programming - 3D printing metal (additive manufacturing) - Security management - 3D scanning - Milling technology - Construction - Assembly - Hose packages - Service - Training Our 3D metal printing services at a glance: - construction work (cooling ducts, component optimization, etc.) - Checking the cooling channel design (flow simulation, thermal images, flow analyzes) - coatings - Plastic prototypes - Component measurement - Creation of plastic models - 3D scanning / reverse engineering - fine machining (milling, grinding, eroding etc.) - Surface treatment (anodizing, electropolishing, etc.) - hardening - welding
    > Read more
    Employees
    20 - 50
    Year of foundation
    Certifications

    Watch

    Melchers Components - Melchers Tech...

    C. Melchers & Co. was established on January 1, 1806 in Bremen, where the global company still maintains its headquarters to this very day. In the first few decades of the company’s history, over 30 ships sailed the oceans of the world under the Melchers flag, linking the ports of Europe, America and the Pacific. In the 1860s, C. Melchers & Co set up operations in Asia, where all its trading interests swiftly moved. At the same time, with the onset of steam ships, it abandoned its own shipping business to devote itself entirely to extending its trading operations. 1866 saw the establishment of the first branch in Hong Kong, in the wake of which China began to develop into a key lynchpin for the company’s business. The ensuing decades were a period of rapid growth for Melchers in China, with over 2,000 people employed at 12 branches and plants throughout the country. The First World War proved to be a setback for business relations, although business quickly recovered. It was not until the end of the Second World War in 1945 that business came to an almost complete halt. Even so, the company continued to survive, re-opening its first branches in Hong Kong, Singapore and Kuala Lumpur in the early fifties and gradually extending its branch network across Asia. Following the opening of the Chinese markets at the end of the seventies, Melchers set up branches here again, underscoring the significance of Chinese business for the company. With the establishment of a branch in San Francisco in the early eighties, the company also started to engage in US-Asian trade so as to gain a share of the rapidly growing trading relations between these two regions. Trade with China remains a key focus of the company’s overall business, comprising as it does imports of special natural products and finished goods on the one hand and exports of plant, machinery and supplies for the Asian industry on the other. Yet, business with South East Asia has since also come to the fore, with the company amassing broad-based expertise in marketing and selling consumer goods in particular. There are special departments for each article group in Bremen as well as at the foreign branches. They work largely independently within the overall company and are staffed by highly qualified experts. Over 1,000 employees in Germany and abroad assist customers and suppliers with their specialist knowledge. Rather than being based at the company’s headquarters, most of these employees are now stationed at subsidiaries, something which in turn reflects the company’s further development and the strategic alliances which it has forged.
    > Read more
    Employees
    > 1000
    Year of foundation
    1806
    Certifications

    Watch

    CP Tech GmbH

    CP Tech GmbH from Büren has been part of the Nedschroef Group since June 2017 and focuses on innovative in-house products, engineering services, high-performance components and complete solutions for the automotive, motorsport and aviation industries. The focus of the corporate strategy is on the development of new mobility concepts, shaped by global trends such as e-mobility, lightweight construction, networking, sustainability and autonomous means of transport. With around 210 employees, CP covers the entire value chain from development through project management, production and assembly to testing and validation of complete vehicles. The core competence of CP lies in the production of high-precision lightweight components from high-strength steels and the interaction of hand-held welding processes, heat treatments, mechanical processing, including the associated device concepts. CP also has its own agency in Shanghai (China) and works there with various companies.
    > Read more
    Employees
    100 - 200
    Year of foundation
    2006
    Certifications
    DIN EN ISO 3834

    Watch

    mech-tron GmbH & Co. KG

    innovative, metal-working company produces components from sheet metal incl. milled and turned parts specialised in developping solutions to realise specific requirements of customers Optimizing the value chain of the customer: The firm achieves this aims due to: - counselling, support in constructing and - designing your product - from the prototype to series production - everything from one source definite technological orientation > consistent investment dicision high degree of automation > production 365 days a year or producing in multi-shift operations highest quality standards at reasonable price-performance ratios
    > Read more
    Employees
    100 - 200
    Year of foundation
    2000
    Certifications
    ISO 9001:2015

    Watch

    Kiefer GmbH

    Kiefer GmbH has been producing stamped and bent parts as well as welded constructions of the highest quality for more than 35 years. Our components are used by well-known customers in the automotive, building hardware, sanitary, household appliance and solar industries. With a constant focus on efficiency in all production steps, we are able to deliver the highest quality standards at unbeatable prices. We work steel, stainless steel, light and non-ferrous metals as well as plastics up to 15 mm thickness on modern and efficient machines. Our in-house tool shop allows us to quickly and professionally realize even short-term orders. Technical Equipment: - 2 punching machines - 35 eccentric and hydraulic presses with up to 400t pressure capacity - 4 multi-spindle drilling machines - Thread cutting machines - 8 welding workstations (MIG, MAG, TIG and resistance welding) - 2 welding robot systems - 2 high performance metal sawing machines - Own toolmaking
    > Read more
    Employees
    50 - 100
    Year of foundation
    1983
    Certifications
    ISO 9001:2015

    Watch

    Gebr. SCHMID GmbH

    Punching and forming tools with its own tool. Production in lots of 1-100000 St. Processed materials: Steel sheet: 0.5-10mm VA-sheet: 0.5-3mm AL-sheet: 0.5-5mm MS sheet: 0.5-4mm, Cu sheet: 0.5-4mm Rod material are 15mm thick and 6m Length max. Tool dimensions: 900 mm max. Press force: 2500 KN Tube processing to D 200mm Deep drawn parts to D 250mm
    > Read more
    Employees
    10 - 20
    Year of foundation
    1954
    Certifications
    ISO 9001:2015

    Watch

    Glenck Bischof AG Feingussteile MI...

    YOUR GENERAL CONTRACTOR FOR FORMING and MOLDING! FORGING, HOT PRESSES KALTFLIESSPRESSSEN, FREE FORM FORGING IN STEEL, STAINLESS, ALUMINUM, BUNTMETALL, TITAN, FLANGE, RING, TRIMS, Longitudinally PIPES, FEINGUSS, SAND CASTING, DIE CASTING MACHINING PARTS OF FORM PART, OR FROM THE FULL PROFILE
    > Read more
    Employees
    5 - 10
    Year of foundation
    1961
    Certifications

    Watch

    ZS Industries Co., LTD

    ZS Industries Co., Ltd (ZSI) is a Contracted Manufacturer conducting Manufacturing and Engineering Outsourcing in China for the industrial customers from all over the world. Our overall objective is to support our customers in increasing their competitiveness through the successful implementation of their outsourcing strategy. We focus on supplying high quality customized mechanical metal and engineered parts, components or finished products with competitive pricing. Through our cross-cultural setup and efficient operational system, we "bridge" the cultural gap and "shorten" the geographical distance. Life of manufacturing outsourcing thus becomes much more realistic and easier. In close cooperation with our customers, ZSI is supervising the actual manufacturing together with our selected subcontractor network. We don't own any production facilities; instead, we buy capacity from our subcontractor network and focus on increasing the efficiency and effectiveness of the whole supply chain. ZSI is committed to creating value for our customers through the cross-cultural setup, the competitive supply base, the efficient operational system and the innovative service package. We aim for long-term relationship with both our customers and our subcontractors.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2003
    Certifications
    ISO 9001:2015

    Watch

    Hiteco Ltd.

    Hiteco Ltd. is a private Chinese company with 20 employees (three of whom are German speaking), headquartered in Shanghai (China) and a further location in North China. Since the company was founded in 2003, Hiteco has been supplying va 1. Castings (various methods and materials) 2. Turned parts 3. Injection molded parts (including WKZ-mold construction) 4. Punched and forged parts to Germany, Europe and the USA. The Hiteco office in North China also deals with wire mesh, perforated sheet metal and also building materials. Hiteco also operates in the field of quality and supplier management, ie Hiteco manages and manages its supplier base in Greater China on behalf of European companies (quasi as an external workbench). This includes services like 1. Quality control before shipment 2. Monitoring the delivery performance, including supplier development programs in Greater China, 3. Search and qualification of new suppliers in China (e.g. for localization projects). Regular visits to Europe (at least 4x per year) also ensure personal contact and exchange. The goal of Hiteco is always to offer you the best price / performance ratio, in terms of quality, but also in terms of delivery time, logistics, project management and communication.
    > Read more

    Watch

    TOIPES UG - Industrievertretung

    > Read more
    Employees
    < 5
    Year of foundation
    2017
    Certifications

    Watch

    Riedmüller Kunststofftechnik GmbH

    Riedmüller Kunststofftechnik GmbH in Radolfzell operates successfully in three specialized segments: -Acrylic glass processing and embedding of objects for advertising and technology. -Machining, milling, turning, gluing, bending, laser cutting and finishing by printing and engraving. -Injection molding technology with the latest machinery from construction to the finished article. -Manufacture of PUR foam molded parts. Well-known corporations and companies appreciate the precise work and the good balance between economy and quality of Riedmüller Kunststofftechnik GmbH.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1980
    Certifications
    ISO 9001:2015

    Watch

    Metal-Castings and More GmbH

    Delivery of castings and forgings including processing in Asia. The Asian partners have the appropriate approvals. ISO 9001: 2008 is granted. Approvals under the Pressure Equipment Directive (PED / AD 2000) or ship classification approval LRS, GL, DNV, BV available. Certificates available on request. Partner agencies on site to monitor the production as an indispensable part of our quality philosophy. Material: cast iron, ductile iron, cast steel, cast stainless steel, duplex Casting processes: investment casting, sand casting Form process: Hand molds and machinery forms Models: wood or metal
    > Read more
    Employees
    < 5
    Year of foundation
    2010
    Certifications
    ISO 9001:2008

    Watch

    Anant GmbH

    The Anant GmbH is a marketing subsidiary for own products & representation for few well-selected Indian manufacturing units. We have a good knowledge + experience for quality systems & supervised manufacturing outsourcing from India. Our German representation offers a potential to take up a responsibility to supply the article as door delivered & being your contact/contract partner. whereas our Indian technical team offers possibly of economical in-house manufacturing as well as local outsourcing under our supervision & our own quality control. At Patel Technomation - India, We have the experience and capability of sub-contract CNC machining including supply/procuring of foundry and forging products in small batches as well in large quantity. We follow the TÜV SÜD ISO 9001-2000 quality system and are dedicated to providing excellent customer service, and the timely delivery of quality products. Our Manufacturing unit is located at major Auto-parts manufacturing, Casting, Forging & engineering hub in India; which offers us a good development possibility for any specific/special part manufacturing possibility in a most economical manner.
    > Read more
    Employees
    200 - 500
    Year of foundation
    2006
    Certifications
    ISO 9001:2015
Limit search by:
Region
Technologies
Materials
Company data
Industries
Certifications
Top categories
Hydroforming