Find Rolling .

GLOBO SRL, founded in 2003 in Verolanuova, is a company with decenniums of experience in the field of small metal components and specifically of bar turning. In the last few years the company has grown, not just technologically with the extension and the renovation of our machineries and the introduction of new measuring instruments, but also professionally due to our attentive and skilled staff. Our Company is ISO 9001:2008 certified. Each stage of the production line, from the receipt of the order to the final product, is checked following the criteria of INDUSTRY 4.0. On this way we are able to satisfy better customer demands. We also have continually updated rolling stock able to produce a range of articles from 4 mm to 42 mm diameter. Our experience field permit us to work in several sectors from automotive, hydraulic, oleo dynamic and electronic to gas, refrigeration and climatization. Our products can be made of brass, stainless steel, free cutting steel (AVP) and aluminum. Quality and customer satisfaction are our main aims and with this in mind we have a technical office equipped with MITUTOYO optical and three-dimensional machines, a MITUTOYO rugosimeter and altimeter and other internal and external BOWERS micrometers.

The principal workings we realize are the following: stainless steel laser cutting, bending, stamping, welding, finishing and packaging. Our machine fleet consists of: - 2 lines of stainless steel laser cutting systems (sheet and tube) - Semi-automatic tube cutting line - Bending machines for sheet with a maximum processing length of 4 meters - Hending machines for tube D. 10 to D. 60, square too - TIG and MIG welding work-stations - Electric punching machines - The cleaning and packaging division completes the production cycle of requested articles, ensuring the quality of manufactured product.

We specialize in thermal protection tubes, thermowells, static mixers, pressure vessels, heat exchangers and tube coolers. We have an approval acc. ASME Section VIII Div.1 (Certificate No .: 54.838 - 27.03.2018) and are accordingly approved Stamp-Holder. Likewise, we are approved manufacturer for defense technology products acc. DIN 2303 and are approved for the manufacture of pressure equipment cat. II module A.

As an up-and-coming steel and sheet metal processing company, GB is known for fairness, speed and delivery reliability. The aim is to further improve the quality, efficiency and reliability of production through constant further development.

m s d - steel design msd, based in the Sauerland region, is your innovative partner for individua single components, system components and assemblies made of metal or plastic and specified electronics. We develop, produce and offer logistics services with a own warehouse. msd was founded in 1996 and is located in Finnentrop (Olpe) & Bottrop. With our competence network of 5 companies, we have a daily capacity of 250 employees and thus guarantee performance, flexibility and reliability. Designing & development Procurement and disposition exact sheet metal processing Surface treatment Mechanical processing / machining Sealing / gluing / foaming Installation of specified electronics Assembly, test and inspection

With us invisible energy becomes visible quality. Klug laser is a successful family business with flat hierarchies, short reaction times and above-average flexibility. Who we are listed by so many loyal customers as preferred supplier, which always manages to convince its business partners. Through highly qualified, committed employees - experienced CAD draftsman and skilled metalworkers - and by an automated machinery with brand appliances, which is always at the latest state of the art. Translation by Google Translate

Complete machining of precision turned and milled parts Manufacturing material: 1.0038 1.0053 1.0718 1.0726 1.1191 1.2080 1.2210 1.2379 1.2826 1.3505 1.4021 1.4057 1.4104 1.4112 1.4301 1.4307 1.4305 1.4404 1.4571 1.4310 1.7131 1.7220 1.7225 1.7228 EN-JL-1040 Ms58 ​​Rg7 CUBE2 aluminum alloy Si1-Si0, 5 AlCuMgPb 3.7165 Peek +30% GF Peek 450 G Pa Pet Pom PP PVC Teflon

Miba sintered components are high-precision, high-strength parts produced using special processing technology. We focus on increasing efficiency, reducing weight, improving shifting comfort, optimizing NVH, and protecting the environment. As an international solutions-oriented and development partner we work closely together with our customers in optimizing sintered components. https://www.miba.com/en/industries/industrial

Good day, my name is marco alex. I am a master craftsman in metal construction and have also qualified as a welding specialist and fastening technician. My goal is to implement your ideas and turn them into a product with my specialist knowledge. There are no limits to creativity and design. I would be happy to advise you in a personal meeting so that we can work with you to design the right product according to your wishes. This brochure is a small excerpt of my diverse range of products. You can find the full scope of my products and services on my homepage. Just drop by and let yourself be convinced. For questions, I am happy to assist you. With best wishes Marco Alex

Family business in metalworking. Department of steel construction, sheet metal processing, assembly and water jet cutting for industry and private individuals.

The company AC-Tech introduces itself In 1999 the foundation stone was laid for the business area of today's AC-Tech Metall- & Blechtechnik GmbH. Initially, it was decided to invest in the parent company, Tuchel Maschinenbau GmbH, to further expand their own vertical range of manufacture in the area of sheet metal production. In addition to self-supply with sheet metal components, other needs were quickly recognized on the market, so that sales outside the Tuchel company grew constantly. Continuous expansion of the machine park opened up new market segments. Finally, the “all-round service” was so well received by customers for metal construction products that it has developed into a sector focus that still accounts for a large part of sales today. Due to the need to create more production space, the Tuchel company decided to outsource the “Metal and Sheet Metal Technology” department. On an area of approximately 10,000. sqm, not far from the parent company, the new production facility was opened in Easter 2013.Due to the positive business development, a further milestone was reached in March 2016, in which the previous business area "Metal and Sheet Metal Technology" was operated as an independent company. This is the birth of AC-Tech Metall- & Blechtechnik GmbH. We see ourselves as a service provider and system supplier for the various tasks of sheet metal processing, from cutting services to the production of complete assemblies made of steel, aluminum and stainless steel. Our technicians assure our customers a head start in development with simultaneous product and cost optimization. Thanks to our modern machinery and a motivated team of skilled workers, we supply our customers with complete sheet metal solutions. We have specialized in the production of medium-sized series in a just-in-time delivery service using an EDP.

Dear Sirs; Our company is in the market since 24 years. We target our selves to create more competitive solutions for our customers. We will be very pleasure to present you our experience with LCC (Low Cost Country) advantages in Turkey for your product range that you could prefer to subcontract for your future benefits. We will look forward to receive your quotations to start our mutual partnership.Please do not hesitate to contact us For any affair. Best Regards Eyup Yildiz

The New Hauser Group is the holding company of the 26 currently single company with 2,195 employees and an annual turnover of 450 million euros in 2008. The activities of each company can be found in the following business areas again Textile • batching • centerwind • traveling cleaner • Transport systems (cheeses, roving bobbins, spinning cans) • suction and vacuum systems • coating and dry locations (use behind Web and knitting machines) • storage systems for bobbins • Palletiersysteme Contract production, such as • Rotating parts (pistons, bushings, washers, rings, cones, control piston, shaft, axles, hubs, pins, screws, spindles, pins, cylindrical rollers, rollers verch. Sizes, etc.) • Milled Parts • complete machine and plant construction according to customer requirements from design to Installation and Service • roller production (up to 8000 mm total length) • Locksmith • Wage measurement (modern measuring room includingPortal meter Zeiss MMZ G-25 30 20) Commercial Vehicles • Production of portal elements • Profile editing • Installation • Coating -Machine Elements • Expanding shafts • Clamping Couplings • chucks and adapters • friction and blade shafts • Shaft handling -Kompressorenbau (shipping) • Start air compressors • pressure vessel • Industrial Compressors • compressed air starter • Air-conditioning • bilge oily water separator • Biological treatment plants Environmental engineering �� Screw mills, up to 120 m³ / h • starscreens • Shovel separators • air classifier Products for the steel industry • Band edge processing facilities • rolling mills ��� conveyor systems A growing product range and increasing demands of customers from individual divisions make a steady and adequate investment readiness required for a stable and healthy growth of the company can be secured for the future. A particular interest is that in the group a technology-and innovation-friendly climate is to be promoted in the unconventional thinking and new ideas

The machining of steel is our core competence. Kovac steel has its headquarters in Graz and has about 50 employees who serve our customers with great competence at 2 locations. Due to continued growth we are now one of the leading providers in Austria as well as in foreign markets - rising exports are among others to Slovenia, Croatia, Bosnia and Hungary. With over 16 years experience in laser processing of sheets and tubes and a total of 12 laser cutting machines at 3 locations Kovac steel is the absolute market leader in this field in Austria. Kovac steel has taken already in 1994 its first laser cutting system in operation and until today expanded its machinery continuously. State of the art equipment in conjunction with highly qualified staff and an extensive warehouse assure the supply of parts to the highest quality and shortest delivery times. Application Laser cutting is used where complex shapes are required for precise, fast processing and almost force-free processing.Laser cutting is opening up more and more applications in sheet metal processing and is known for quality. Compared to alternative methods, such as stamping, laser cutting can be used economically even at very low quantities. The high degree of flexibility, coupled with an almost unlimited material and shapes that give rise to global recognition as an indispensable basic technology. The kerfs are burr or even free of burrs and must therefore be rare reworked. Our strengths to your advantage • High security of supply by a total of five laser cutting machines • Short delivery times thanks to an extensive stock of mild steel, stainless steel and aluminum sheets and regional proximity of our locations • Wide range of parts ◦ parts with dimensions of a few millimeters up to a size of 6 x 2 meters ◦ sheet thicknesses from 0.2 to 25 mm (aluminum up to 15 mm) • High flexibility in order processing • Highest quality through experienced, well trained staff and a quality assurance according to ISO 9001:2008 • Virtually no post-processing due to the high precision of the blanks • Reduction of mechan.Processing by precise location and exact size of the holes • Parts Identification by engraving Our machinery Machine Type: Power table size Bystar 4020 4.4 KW 4,000 x 2,000 mm Bystar 4020 4,0 KW 4,000 x 2,000 mm Bystar 3015 4,0 KW 3,000 x 1,500 mm Bystar 3015 4,0 KW 3,000 x 1,500 mm BySprint 3015 1.8 KW 3,000 x 1,500 mm Tubematic 3.2 KW pipes up to 6,500 mm (laser tube) We work quickly, quality and at competitive prices. Machines at the highest technical level and highly qualified staff who always happy to assist you with their expertise to the side, meet during the entire process chain quality requirements of the ISO 9001:2008 certification.

Special Metal Srl is a Company of AIOLFI Group. Special Metal is the branch of AIOLFI Group operating in the steel working field, industrial and civil works. For industrial works, we have a high expertise on: Structures in Stainless Steel and Carbon Steel, Structures for Machinery, Carter, Canopies, Forklift, Work Plans, Pre-assembly of Mechanical Units, Covers, Shields, For civil works, we have a high expertise on: Stairs, Gates, Doors, Railings, Mezzanine Floors, Gratings

SAMOTEH srl is a company that has been operating in the field of light metal carpentry for 20 years, offering processing and production services for third parties such as: • Laser cutting for sheets and tubes • Bending of sheets and tubes to C.N.C. • Sheet and plate calendering • Punching • Welding of iron, stainless steel and aluminum • Assembly • "Galvanizing, Chrome-plating, Painting" finishes Our customers are companies that operate in the metal carpentry sectors in general: • Furnishing accessories •Street furniture •Building • Components for the agricultural and thermal sector • Packagin • Metal shelving

innovative, metal-working company produces components from sheet metal incl. milled and turned parts specialised in developping solutions to realise specific requirements of customers Optimizing the value chain of the customer: The firm achieves this aims due to: - counselling, support in constructing and - designing your product - from the prototype to series production - everything from one source definite technological orientation > consistent investment dicision high degree of automation > production 365 days a year or producing in multi-shift operations highest quality standards at reasonable price-performance ratios

Your partner for complete sheet metal processing and powder coating. Complete assemblies including surface finishing and assembly - all from a single source.

We are a privately-owned company founded in 2016. The Chief Operating Officer, Ionut Luca, has many years of experience in the engineering and CNC Machining Field. Our company is pleased to offer a combined 20+ years of machining and engineering experience, which is invaluable in providing precision CNC machining. The mission of our company is to provide a manufacturing facility with the capabilities of performing custom precision machining and production component manufacture work in prototype and production quantities while offering the latest in machining and fabricating techniques. In addition to production capabilities, we also offer CAD Design services as well. We have a proud record of meeting the precision requirements for a significant list of valuable customers. Our quality is monitored through various quality processes including PPM Tracking and continual improvement methods. We would be pleased to quote your machining and fabricating requirements.

Manufacture and sale of steel structures and structural steel components for industrial and plant construction / commercial construction. Production of CNC sheet metal blanks and welded assemblies. Industrial and steel construction as well as steel construction project support.

We are a 9-person company founded in middle of 2012 in cooperation and in the installations of a company with more than 20 years experience in metal-sheat processing. We are in the center of Portugal, close to the spanish border, at the same distance to Lisbon or Oporto. The Industrial area of Castelo Branco is the biggest industrial area besides Lisbon/ Oporto. Our company has a wide range of machines dedicated to metal-sheat processing: punching/ nibble-machine (up to 4 mm), gas-cutting/ plasma (up to 150 mm), 2 bending machines up to 450 tons, CNC-milling and a wide range of solding processes. We do, sandblasting, washing and electrostatic powder painting, too.

AB Umega is one of the largest metal processing companies in Lithuania. Company is focusing on technology, products development to meet the end-user expectations and needs. Employees are highly skilled; products are produced from high quality materials, using the innovative technology; all this leads to high level of quality, reliability and durability Our experience working with Western Europe companies is over 15 years. The majority of orders comes from foreign customers and partners. We are always looking for new ways how to improve our business, how to be more flexible and effective and we are constantly looking for new partnership opportunities with new customers. We are open to the various cooperation proposals and we believe we can start mutually beneficial cooperation for your company. We are skilled in various kind of Sheet Metal processing (CNC cutting, bending, punching, stamping, deep drawing), Mechanical processing (CNC milling, turning, grinding and etc.), Welding (robot MIG/MAG, manual MIG/MAG/TIG, spot, stud) and many other technologies Surface preparation and coating, Casting, Thermal treatment. We are also able to design and produce various tooling equipment. We offer reliable, high quality metal processing subcontracting service. We suggest you to try our service prices and technologies by sending us few trial calculations and together evaluate partnership opportunities. Many mutually valuable relations have started this way.

We produce different kinds of products in steel, stainless steel and aluminum, including welding according ISO 3834-2; therefore an international welding technologist and engineer are working in the company. Thanks to the combination of various processing techniques, after-treatments and transport, we offer a total package and can therefore take over part of your logistic work. We have our own warehouse so that we also have the possibility to put products in stock for you. We distinguish ourselves by a special machine park. For example, we are able to laser cut very thick materials at a high speed, or to roll special shapes in sheet material on our CNC roller. The sheet materials that we can process on laser cutters go from 0.4 to 25 mm thick up to a length of 6.000 mm! We have a high degree of automation (welding robots) but also very skilled professionals who can manufacture small series, prototypes and special products perfectly. We can bend up to 4,000 mm on our press brakes. We offer the possibility to produce stock; e.e.a. in good consultation with the customer. Possible delivery to the door by means of a truck is also possible.

The company Železnobrodské Strojírny sro is located in Northern Bohemia in the town of Železný Brod. The company was founded in 1965 as a main supplier of glass machines for the Liberec region. At present, the company employs 20 MA and is oriented towards general mechanical engineering. JOB SHOP Production area approx. 2000m2 EN ISO 9001: 2016

Our German - Polish company with headquarters in Poland can give you things like: - Laser cutting (all metals in small and large series) in Poland, Eastern Europe - Plasma cutting (Very dickwändiges steel) in Poland, Eastern Europe - Edges (on 3 Kantmaschienen to 3m Bläch) in Poland, Eastern Europe - Welding work (steel and stainless steel) in Poland, Eastern Europe - Turning in Poland (series from 1000 pieces upwards ....), Eastern Europe - Milling in Poland (series from 1000 pieces upwards ....), Eastern Europe - Drilling in Poland, Eastern Europe - Punching in Poland (series from 1000 pieces upwards ....), Eastern Europe - Konstruktionsschweisen - Hot-dip galvanizing - Painting - Pulverbeschichtigen - And any WORKS WHEN IT COMES TO METAL GOES afford. Drainage as floor drains, shower drains, box gutters and slotted channels made of stainless steel are the main theme for us, We also manufacture doors for cooling Heuser, shelves and stainless steel furniture. Our customers in Germany and other partner countries are very satisfied with our work, and in most cases we take over a part or the whole production of our customers. I admit even added that we employ 120 workers Mitt. What We Offer is as I said a complete machining of metals according to their measure, and desire, we deliver the goods. Directly to you with our trolleys You can rest assured that no one will know that you produce in Poland :) If we have you intrested, we do our best also to a partnership and cooperation to convince.

From sheet metal processing using the latest CNC controlled processing technology to conventional locksmithing. With experience of over 50 years, today is the third generation of the innovative family-owned company for stability and continuity in the market. Today's business of the Doll Metall GmbH comprises the range of metal processing with special emphasis in the areas of sheet metal processing, steel processing and steel construction. We offer: - Punching / nibbling - Laser cutting - Water jet cutting - Flanging edge to 6500mm - Cutting up to 6000mm - Welding Working with Approvals 1800/7 and 1090 - A rich material warehouse for fast response - And much more.

We deal with on-site production and assembly of stainless steel and aluminum equipments, products and parts. Our Hungarian - owned company was founded in 1996 . Since 1982, the core members have been exclusively engaged in the manufacture and installation of stainless steel equipment, so we have more than thirty years of specialized professional experience. Our office building In the early years we worked in a 100 square meter rental property, which gradually expanded to 200 and then 400 square meters as machines and tools were added. In 2003 we bought a 3,300 square meter stand-alone building. Our current workforce consists of 18 well trained locksmiths and welders. In the 550 square meter workshop you will find machines for sheet metal working, lathes and milling machines, modern welding equipment for welding stainless steel, as well as grinding machines and tools for aesthetic finishing.

Our company provide services in a 5.000 m2 closed area in Izmir as a part of group companies with 25 years of experience in the metal sector. As Simer Sac, we stand for the principle of maximum quality at reasonable prices since the day we started our operations. In this context, besides the sheet metal sales, as Simer Sheet Metal Processing Center, perform laser cutting, plasma cutting, optical cutting, press brakes, cnc pipe processing, guillotine cutting, welding and painting processes with our professionals. With our state-of-the-art machinery and qualified personnel, we have the equipment and resources that can respond to customer requests and expectations at the highest level. Every metal has a story and we complete this story for you from the beginning to the end and present it to our valued customers as turnkey.