4197 Suppliers found
List
Raster
Map
Sorted by 
Go to watch list 0

    Watch

    Glutz AG

    Locking and Hardware Industrial Components
    > Read more
    Employees
    200 - 500
    Year of foundation
    1863
    Certifications
    ISO 9001:2008

    Watch

    MCON Mechanical Construction GmbH

    Company description Looking the whole manufacturing from a single source? Put on the right partner, because it gives you the necessary freedom for your core business. Send us your drawing. We procure materials, rework the parts, ensure the coating and monitor the entire production process until you can use the pre-finished workpiece on time available. Mcon GmbH (Austria) has specialized as a supplier of high-quality production parts. With years of experience in mechanical engineering, we were able to establish ourselves very well in the domestic and European market. Our strengths are high quality associated with punctuality, expertise on our part as well as those of our contractors. With this basis, we like to solve your challenges! OUR SKILLS We put our focus on products that we have been perfecting. In order to offer our customers perfect products, we focus on the following areas of expertise: • Frästeile • Turned parts • weldments Especially in the mechanical engineering, plant engineering, transmission engineering, railway and traffic systems, renewable energy and medical customers appreciate our expertise, as well as the perfectly manufactured products and the fast service. Frästeile: Quantities: Small, medium and large series Dimension: Max. 500 x 1200 mm Material: Steel, stainless steel, nonferrous metals, plastics surface treatment Curing, painting, nitration, anodizing, coating, Brin Irish. Turned parts: Quantities: Small, medium and large series Dimension: Conventional machining: max. D = 220mm Material: Steel, stainless steel, nonferrous metals, plastics Surface treatment: possible in cooperation with long-standing and reliable partners Welding: Quantities: Small series Weight: Max. 3000 kg Material: Steel, stainless steel Welding Types: After method E111, TIG / 141, MIG / 131, MAG135 / 136 Welders have valid certificates according to EN 287/1 Surface treatment: possible in cooperation with long-time partners. Surface treatment: anodizing Chromium Blacking paint galvanize Wärmebechandlung: gas nitriding vacuum hardening are also possible on request quality responsibility "The customer comes back, not the product" So simple and clear aptly is our internal motto. Achieving this does not succeed by means of regulations, but only by really motivated and well trained staff. So is the ultimate goal for us to provide a secure future for employees and company. We intend to achieve by careful and constant growth of the company and by absolute customer satisfaction. Challenge us with your requests!
    > Read more
    Employees
    20 - 50
    Year of foundation
    2011
    Certifications

    Watch

    Treschnak GmbH

    The firm Joh Treschnak was founded in 1978. She pursued from the beginning a two-pronged strategy based on metal products according to customers' drawings on the one hand and thermoplastic injection molded parts on the other. In line with the growing demands in the metal-processing area of ​​our machinery has been steadily expanded. The Ter Steege Groep 2003 took over its long-standing Liferanten and supports the company in their current business fields in full. By moving to the new factory buildings at the site Zollhausstraße 5 in 2004, the company also equips spatially for future requirements For more info you like to see at our presentation.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1978
    Certifications
    ISO 9001:2008

    Watch

    SEEGER Lasertechnik GmbH

    - Laser cutting of metal sheets and pipes - Quality welding to DIN 18800-7 "B" - Assemblies - Bending and folding - Punching, stamping and pressing parts - Water jet cutting - Laser marking - Vibratory Finishing - NEW + + + laser parts and folding up to 4 m in length Services For customers, we are problem solvers, and partners. - From a simple laser part to complex assemblies we manufacture everything according to customer requirements. Whether from a hand sketch or a DXF file: Together with our clients we find the solution. On short-term supply needs, we respond flexibly and simultaneously meet all quality requirements of our customers. The surfaces we deal with experienced partners. - Laser cutting Steel: 25 mm thick in size 4000 mm x 2000 mm VA: 25 mm thick in size 4000 mm x 2000 mm Aluminium: 15 mm Thickness in the format 4000 mm x 2000 mm - Laser marking VA, aluminum and brass up to a size of 400 mm x 600 mm - Water jet cutting Virtually all materials in the format of 4000 mm x 2000 mm Please queries whether the desired sheet thickness is available in stock. - Bending and folding Steel: 5 mm thickness and 4000 mm length VA: 4 mm thickness and 4000 mm length - Welding All common welding processes such as MIG, MAG or TIG steel and VA
    > Read more
    Employees
    20 - 50
    Year of foundation
    1991
    Certifications
    DIN 18800-7:20
    TP Suche Banner

    Watch

    Maschinenbau Stolze GmbH

    > Read more
    Employees
    10 - 20
    Year of foundation
    2000
    Certifications
    ISO 9001:2015

    Watch

    hitro-tec

    > Read more
    Employees
    20 - 50
    Year of foundation
    2002
    Certifications
    ISO 9001:2015

    Watch

    Mittag GmbH

    > Read more
    Employees
    20 - 50
    Year of foundation
    1896
    Certifications
    DIN EN 1090

    Watch

    R. K. Gehäusebau und Blechbearbeitu...

    RK and case production Blechbearbeitungs GmbH is a metal processing plant specializing in sheet metal processing. Your partner for single and series production. We manufacture our products from steel, stainless steel, aluminum or other non-ferrous metal sheets and profiles, among others, with the latest CNC sheet metal and laser technology. On request we deliver our products powder coated in RAL color of your choice. Our staff is composed of highly qualified and motivated employees. Our guiding principle Innovative sheet metal working to perfection through design and process optimization.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1995
    Certifications

    Watch

    Glenck Bischof AG Feingussteile MI...

    YOUR GENERAL CONTRACTOR FOR FORMING and MOLDING! FORGING, HOT PRESSES KALTFLIESSPRESSSEN, FREE FORM FORGING IN STEEL, STAINLESS, ALUMINUM, BUNTMETALL, TITAN, FLANGE, RING, TRIMS, Longitudinally PIPES, FEINGUSS, SAND CASTING, DIE CASTING MACHINING PARTS OF FORM PART, OR FROM THE FULL PROFILE
    > Read more
    Employees
    5 - 10
    Year of foundation
    1961
    Certifications
    ISO 9001:2008

    Watch

    PUFFE Mechanik GmbH

    > Specialization in single part production / contract manufacturing in the field of CNC - turning and milling, on assembly production and special machine construction > Machining of various materials eg quality steel, stainless steel, non-ferrous metals, plastics > Production and mechanical processing of welded constructions made of steel, stainless steel and aluminum > Implementation of surfaces and heat treatment
    > Read more
    Employees
    20 - 50
    Year of foundation
    1997
    Certifications
    ISO 9001:2015

    Watch

    ETS Edelstahltechnik GmbH

    The ETS Stainless GmbH was founded in 1984 in Stuttgart as ETS Edelstahltechnik Stuttgart. We are a medium-sized company with 4 divisions - Stainless Steel Sheet Metal Working - Metal - Grating Manufacturing - Hot-dip galvanizing and currently employ approximately 60 employees. Our headquarters is located approximately 50 km south of Berlin.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1984
    Certifications
    DIN EN 1090

    Watch

    RUDA-Metall GmbH

    RUDA-Metall GmbH The company RUDA-Metall GmbH was founded in 1982 and has its manufacturing focus in the area of technical stampings. Here components for the automotive industry and its suppliers and the electrical industry are manufactured for years. The modernized about 2 years ago vibratory finishing system, we can achieve the best results even for your parts. The tools are designed and manufactured in our own modern tooling. In 1994, with the company K.Fr. Brahm, consisting since 1868, a group of companies founded. The K.Fr. Brahm manufactures focus: furniture fittings, hinges, stampings for light domes, scaffolding, electrical parts, office furniture and fittings for the mirror industry. In order to work more efficiently and more cost effective for your customers in the future, the K.Fr. was Brahm 1-1-2006 integrated GmbH in the company RUDA metal. Our Lord Dannhorn (Dip.Ing. Engineering FH and Dipl. Economics FH), as well as our technicians and master craftsmen to support you in the optimal and cheapest design your parts.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1868
    Certifications
    ISO 9001:2008

    Watch

    Herpertz-Präzision Werkzeug- u. For...

    Allow us to introduce ourselves to you. We are your expert partner for stamping and bending products. Since 1983, we have been running a state-of-the-art tool and mould making operation for all branches of industry. The tools and moulds we produce are based either on our own designs or plans provided to us. Naturally, CNC wire cut EDM, die sink EDM, start hole drilling, milling, grinding, and chamfering are all covered in our fabrication. Besides the tool and mould making operations we also have a stamping shop and a bending shop from 10 – 315 t, and a deep drawing press from 20 – 320 t as well as various bending machines. Two fully-automatic welding robots as well as CNC processing centres count as one of our newest acquisitions. Our fabrication range consists of: - Tool and mould making - Stamp and bending products - Drawn and coined products - Clamping and fastening elements - Load securing - System construction - Welded components - Construction of complete component assemblies We make these products from a variety of materials according to samples or drawings. We’ll be glad to answer your needs with construction and design for the fabrication range detailed above. Our services have been expanded to include a wet painting plant so that our products can be delivered entirely coated, mounted and packaged. In our design studio, we will create the constructions for: - Stamp and cutting tools - Bending tools, deep drawing tools - Specialty machines, equipment construction, gauges All of our production is subject to the quality standard DIN EN ISO 9000:2000.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1983
    Certifications
    DIN 18800-7:20

    Watch

    Giacomazzo Agostino S.r.l.

    Since 1964 Giacomazzo Agostino Srl has been specialized in the design and construction of industrial plants, autoclaves, mixers, tanks, special filters and other custom made solutions. All our products have the CE certification as well as PED and ATEX certifications if needed. Thanks to our wide machine park and the broad expertise of our workers we can advice the best solutions to our customers.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1964
    Certifications
    DIN EN 1090

    Watch

    TechnoMetal s.r.l.

    Technomatel is specialized in welding and construction of welded structures in steel and aluminum. We are certified by Uni En Iso 9001 and Uni En Iso 3834-3. The welding is performed manually for small series and robotized for medium and large series.The welding processes available are mag, mig, tig. We are 40 employees. We are able to supply the product of metal carpentry complete also of surface treatments (cataphoresis coating, powder coating, electrolytic galvanizing and hot galvanizing).
    > Read more
    Employees
    20 - 50
    Year of foundation
    Certifications
    DIN EN ISO 3834
    TP Suche Banner

    Watch

    alp GmbH

    Production plant for sheet metal parts
    > Read more
    Employees
    10 - 20
    Year of foundation
    2015
    Certifications

    Watch

    SFK Schulz GmbH

    Who we are The service focus of SFK - Schulz GmbH, service, manufacturing and plastics technology - is the small-and large-scale production and distribution of turned and milled parts made ​​of steel, plastics, aluminum, and zinc, as well as the construction of devices and equipment for special purposes. In these areas, we work very closely with operations in the Republic of Lithuania. Here, we see ourselves as an external supplement to the German market and offer for the above mentioned areas complex, cost-effective solutions and our services. We take care of our customers the complete manufacturing and logistics operations of selected individual parts or assemblies. Thus we are able to realize complete solutions at a high technical level. On our website, we provide only a small part of our extensive service offer whereas Get personal advice from us we will find a suitable solution for your request.
    > Read more
    Employees
    < 5
    Year of foundation
    1998
    Certifications

    Watch

    Grob Aircraft SE

    .
    > Read more
    Employees
    200 - 500
    Year of foundation
    2009
    Certifications
    ISO 9001:2015

    Watch

    Cintas Metálicas S.A.

    Trade in semi-finished products (tubes, rods, tapes, Blecher) Cu-based Trading Dreheteilen brass, bronze, copper and other materials based on Cu (Other materials on request) Trading stampings brass, bronze, copper and other materials based on Cu (Other materials on request) Technical assistance in product development
    > Read more
    Employees
    20 - 50
    Year of foundation
    1992
    Certifications
    ISO 9001:2015

    Watch

    Ha-Beck Mathias Hasecke e.K.

    Manufacture of laser blanks, wire EDM and their processing to the finished product, we are able to flexibly, quickly and competently implement your customer requirements. Our specialized staff guarantees a smooth processing of your orders. Should there be in your company a scheduling bottleneck, we are trying to help with a 24/48-hour service. We are happy to look forward to your orders.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1993
    Certifications
    ISO 9001:2015

    Watch

    Sinoquest International Trade Ltd.

    Since 1989, we've supplied machined, stamped and cast parts and assemblies to Motorola, API-Deltran (Koll Morgan), API-Getty (Elwood) and Wabash Controls. Danahe, Soloflex and other North American and European companies come to us too. We also offer plastic molded and rubber parts, as well as magnets and assemblies.

    There are five experienced senior engineers in our company. We can do engineering coordination and arrangements, production control, quality control, such as PPAP, SPC, per ISO9000 and QS9000, etc.

    We accept samples, drawings, and electronic format drawings, such as scanned drawings, PRO/E format, AutoCAD format, and Solidworks format. We can even help our customers to improve and finalize their designs with cost saving and feasible processes when requested.

    And as today's demand, we issue prompt production status information to our customers at weekly basis. Customer satisfaction has been our only service criteria.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1989
    Certifications
    ISO-TS 16949:2

    Watch

    SO.ME.L. SpA

    Our company manufactures forged and machined parts up to 10 Kg weight. It is Tier 1 supplier and is usually involved in product development by the customer. It is certified IATF
    > Read more
    Employees
    50 - 100
    Year of foundation
    1956
    Certifications
    IATF 16949:2016

    Watch

    Mobitec Kottmann + Berger GmbH

    For more than two decades, we meet innovative and reliable the wishes of our customers. Whether solar industry or aviation and space technology - our expertise is in demand in various industries. And in a variety of situations: They have capacity constraints? Congratulations! We're here to help: Even with small numbers or short-term orders, you can rely on the high quality and punctual contract manufacturing Mobitec. Philosophy Our customer understanding is holistic: We Mobitec want you to feel completely comfortable. That's why you get from us next to a clever system of course accurate measurement protocols, high-quality tools to make informed and personalized advice, a competent 24-hour service. Where - of course that's not natural. But this is precisely the Mobitec philosophy. Innovations Do you have special requirements and want no technology off the shelf? Welcome to Mobitec.We take the time and advise you personally, individually - and honest. The trustful environment that we maintain with our customers is the best basis for the pioneering machine solutions that we design and produce for more than two decades. We specifically cater to your desires and create standard modules flexibly according to your needs. If necessary development work, then you rely on the innovation of our expert team - the next bend we have for you already know the right innovation at hand. Industries Mobitec strikes the arc and has worked for a variety of industries. Our well-known, challenging customers come from the automotive industry, the furniture industry, solar technology, climate and heating technology, medical technology, aviation and space technology, and of course special areas. With all we share a trusting, with many a long-term partnership in which we are all so hinbiegen, as only an experienced, certified A-supplier.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1986
    Certifications
    ISO 9001:2008

    Watch

    Mittelbacher Präzisionsteile GmbH

    > Read more
    Employees
    50 - 100
    Year of foundation
    1992
    Certifications

    Watch

    Gebr. SCHMID GmbH

    Punching and forming tools with its own tool. Production in lots of 1-100000 St. Processed materials: Steel sheet: 0.5-10mm VA-sheet: 0.5-3mm AL-sheet: 0.5-5mm MS sheet: 0.5-4mm, Cu sheet: 0.5-4mm Rod material are 15mm thick and 6m Length max. Tool dimensions: 900 mm max. Press force: 2500 KN Tube processing to D 200mm Deep drawn parts to D 250mm
    > Read more
    Employees
    10 - 20
    Year of foundation
    1954
    Certifications
    ISO 9001:2015

    Watch

    Yantai China-De Safety Equipment Ltd.

    Yantai China-De Safety Equipment Ltd. is an Engineering, Assembling and Export Company with many of our own products and shareholding in some manufacturing companies. Those cover sheet metal part production, investment casting, plastic parts and machining parts. We are a group of companies under German leadership in China. The preparation and processing of subcontracts from China is determined in particular by dates. Provided you are interested in a delivery from China, the time frame must be observed. A required release through a confidential agreement is not a problem at all, but it takes time. However, depending on the season, China is 6 to 8 weeks away due to transportation. Annual orders or recurring requirements work quite well with many of our customers overseas. They only need a different planning in order to be able to make use of the corresponding savings through the still interesting wage level. Even if the current date of delivery is not feasible for reasons of cost, I would be pleased if we could be considered for your future assignment. We design and manufacture fall protection since the early 1990´s. Those consist out of many different materials, such as stainless steel, aluminum, sheet metal and plastic parts. Since the year 2000 we started the production of special vehicle safety belts with sub-suppliers. In 2007, we moved the assembly to China. To overcome quality and reliability problems we selected Chinese companies and some years later we choose the best to become partners, we took shares in their companies. Today we service fall protection companies, adventure park constructors and special vehicle fitters with our products as well with their own products (OEM) along with many others in China, the Americas and Europe. Our customers are small companies as well as some international multi-billion Dollar enterprises. Yantai China-De Safety Equipment as the assembling and export station. Today the group exists of 4 key companies manufacturing • Investment Casting, mostly stainless steel and alloys • Plastic Parts • Sheet metal part production including laser cutting and engraving. • Aluminum Pressure Die Casting including CNC machining. For all we have our own tooling shop along with some additional suppliers for specialties. Please look at our PDF files containing some of our machinery and related part samples. Available are: Safety Equipment with • Horizontal Lifeline Equipment • Climbing Park Equipment • Special Vehicle Safety Belts Laser parts and welding constructions Investment Casting Aluminum Pressure Die Casting Sheet Metal Parts Plastic Parts Tooling Assemblies Besides of our own products we serve a wide range of industries. Further we have an eight year consulting function within the local Investment Promotion Bureau and are responsible for helping foreign investors implementing trading or manufacturing subsidiaries in our region.
    > Read more
    Employees
    50 - 100
    Year of foundation
    2007
    Certifications

    Watch

    NPW-Neunkirchen Schubert GmbH&Co.KG

    NPW-Neunkirchen - an existing family business for over 50 years for customer-specific punching, Stampings, EMI shielding with particular strengths in parts with welded contacts
    > Read more
    Employees
    20 - 50
    Year of foundation
    1961
    Certifications
    ISO 9001:2008

    Watch

    LKM

    We are a metalworking company, based in Wickede (Ruhr). We specialize in the processing of aluminum extrusion profiles (up to 7m) and manufacture according to the exact conditions.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2008
    Certifications

    Watch

    KnePo Kunststofftechnik GmbH

    We are a young company that specializes in the processing of plastic. For the production of our own products technologies such as milling, turning, laser machining, tempering, glue, bend used. We set the machines on a latest standards that ensure high accuracy and high technical availability. Our Mission: Plastic parts offer with the required precision at a very good price / performance ratio and short delivery times.
    > Read more
    Employees
    5 - 10
    Year of foundation
    2014
    Certifications

    Watch

    ZIAS International GmbH

    ZIAS is an international group of companies, which is represented in Germany with ZIAS International GmbH in Darmstadt. Our production is flexible and can operate various jobs in metalworking, which uses the following technologies: turn mill punch roll To bend To cut heat treatment grind extrusion Polymer powder coating welding galvanizing hardening From the production of building profiles to manufacturing precision parts for the medical, aerospace, tools for production machines and entire automated systems and equipment - all the strengths of ZIAS are. Qualified ZIAS staff in all areas ensure the quality of products and ensure timely order processing.
    > Read more
    Employees
    200 - 500
    Year of foundation
    Certifications
    DIN EN 1090
    TP Suche Banner
Limit search by:
Region
Technologies
Materials
Company data
Industries
Certifications

Sheet metal processing

What is sheet metal processing? Sheet metal processing (or CNC sheet metal processing) is defined as the mechanical or thermal processing of sheets. Sheet consists of boards of metal which were produced by a rolling process. It is divided into thin sheets, up to 3 mm, and heavy plates with a thickness of more than 3 mm. Most metals can be processed into sheets and further treated afterwards. Most frequently processed materials are: aluminum, structural steel, copper and stainless steel. For the initial processing of these sheets usually one of the following methods is selected: e.g. laser cutting, nibbling, stamping and bending, precision cutting, shearing. These manufacturing processes are all CNC-controlled on the basis of CAD/CAM-designed data. Downstream processes mainly include deep-drawing, bending, plate rolling, plate straightening, clinching, laser cutting 3D, fineblanking, spinning, pressing and punching, stamping / bending.