Industrial service provider with a focus on mechanical and electromechanical components and devices. Thin sheet metal laser cutting, punching, finishing, lathe, mill.

Metal Spinners Group was formed in 1953, dealing with both national and international customers on daily basis by providing innovative metal forming solutions. We have the widest range of metal spinning capabilities, spinning a wide range of materials and sizes from bullet 10mm (less than 1/2") to 4250mm (almost 170") in diameter bullet less than 1mm (1/16") to over 40mm ( 1 1/2") in thickness Utilising our 'added-value' operation facilities, we offer a "one-stop-shop" service from inception to production.

The Helmut Rübsamen Company Stands for 40 years of experience in non-cutting metal machining. That means: The highest competency in shaping technology, every conceivable piece of machinery based around sheet metal machining and renowned clients in all key areas of industry.

FM Systems is a member of the Rieter Group and thus has access to the appropriate resources. Our house is equipped with most modern machinery CNC turning and milling technology - including combined CNC machining centers, up to 7 axes for small and medium batch production. For individual parts, prototypes and small series we also make use of the existing conventional machinery. We have 175 skilled workers available. We manufacture turned parts in a diameter range of 15 mm - 500 mm (from the rod diameter up to 80 mm) and in lengths up to 1000 mm (automatic straightening up to 2500 mm). We manufacture milled parts up to 600 mm in each axis with very high requirements in terms of location accuracy and angularity. Another main focus is in custom installation of complex assemblies, systems, and mostly all machines. We assemble on 12,000 m² completely crane systems including the necessary modern warehouse logistics (computer-controlled high-bay warehouse). We work on almost any material, such as: Steel (tool steel, free cutting steel), stainless steel (V2A, V4A), aluminum, brass, Copper, plastics (eg POM), cast (Machining of Castings of above materials) Product range: High-speed shafts, plates and bushes with very high standards of concentricity and surface finish for rotor spinning machines and their drafting systems. Rolls with high demands on surface quality and special shapes (spline / corrugating rolls up to a length of 600 mm) Transmission parts with high demands in the area of ​​operating characteristics Our scope also includes the most common method of heat and surface treatment such as nitriding, bronzing, chrome plating - best partners assume services such as case hardening, Nitrocarburizing, etc. Quality assurance: under a specific Qualtitätsabteilung with advanced 3D measurement machines including contour check and Rautiefemessungen up to initial sample inspection reports and certifications.

Punching, bending, deep drawing, CNC and manual push technology, tooling and design for single, progressive and deep drawing tools Stamping bending, deep draw and CNC and manual spinning technology, tool dersign and production for single tools, progressive tools and deep draw tools

For 15 years, Guy Degrenne has been steadily developing as a subcontractor whilst maintaining a constant strategy : • Forming of parts uniquely in stainless steel or aluminium, • Complex deep-drawing (requiring annealing under vacuum), • Parts with narrow tolerances, • Parts with surface finish (polished, satin finish, etc…), • Cutting and drawing of very thick stainless steel parts. In order to speed up the development of this activity, a subsidiary named Guy Degrenne Industry was created in 2000. Deep drawing, Stainless steel, Aluminimum, Emboutissage Complex deep-drawing (requiring annealing under vacuum), Parts with narrow tolerances, Parts with surface finish (polished, satin finish, etc…), Cutting, Stamping, Drawing of very thick stainless steel parts, Polishing, TIG, Laser, Welding, Sub-assembly works

Our has the advanced precision casting equipment and the craft, the annual output is above 2000 tons. The product type includes: The pipe-line valve, the mechanical fitting, the vehicle and motor fitting, the power plant boiler, the sports equipment and so on, mainly used in industry demons, the machinery, metallurgy, geology and mining, petroleum, spinning and weaving, automobile, energy and so on. At the same time, our company also may defer to the customer to attempt the request, makes each kind of high accuracy, high surface smooth finish and shape cavity complex casting. At present, our company＇s casting product size precision could be achieved CT4, the surface roughness could be achieved Ra3.2.We can produce all kinds of the casting products between 3 grams to 100 kilograms weight, within 0.5 meter long. The independent heat treatment shop and processes the workshop, can provide the high grade heat treatment and the machining service for each kind of material for the customer. The company also has the spectrometer made in Germany , the HR -150A machine for testing hardness, the impact testing machine , the advanced physics and chemistry laboratory and other check equipment. We strictly guarantee the quality and the sound surface of our products for all customers . Anwendungsbereiche / Einsatzgebiete: Feingussteile, Präzisionsgussteile ...

Cetra Metal BV A world of Metal Deep drawing, Sheet metal Presswork, Stamping Specialist of Automotive parts

THE HISTORY OF OGB SRL ... OUR RELATIONSHIP WITH THE PAST HISTORY The OGB was founded in 1984 by the passion and dedication of its founder Giuseppe Baleani starting right away to take care of the engineering services sector through high-precision processing such as tube bending, robotic welding, laser cutting, sheet metal bending, and industrialization prototypes acquiring a good reputation in the domestic market. Translation by Google Translate

Blank diameter max. Hand Press: 1200 mm Press machine: 800 mm

Individual solutions for components, mechanical assemblies and systems for mechanical and plant engineering. MSA AG is your reliable partner in mechanical and plant engineering for a wide variety of technological applications. We devote our attention to simple steel containers as well as highly complex research systems. We take on the complete range of plant construction for our customers - from conception and construction to production and after-sales service.

In our, for its high quality world recognized workshop Brass arise especially trombones, trumpets and shawm and 500 different components and cylinder machines for the brass instrument. We also manufacture a variety of punching and stamping parts and perform conventional milling, turning and drilling out. Our production range includes fine soldering with silver and tin, and round welding of non-ferrous metals up to 1 mm. In our company, panel pressing work is performed. We can draw on many years of experience in the forming and processing of sheet metal in the non-ferrous metal sector.

With the company move in 2013, Elpas gained a production area of 5,000 m2. Thus we were able to expand our machine park immensely and optimize our production processes. Our goal is to achieve the best possible customer satisfaction and product quality with the existing competition in the automotive industry. It is important for us to provide technical advice before and after the start of the project, any suggestions / suggestions for improvement for product design and the best possible planning of the necessary tools, test devices, etc.

We are a manufacturing plant for steel, machinery and plant in Aachen. Our four workshops in Walheim are 1900 m2 large, up to 12 m high, and feature five overhead cranes of 5 tons. up to 50 tons. Carrying capacity. Our services include:

• Flame cutting up to 250 mm thick, also in a number of ways
• Steel work up to 70 tons. but also small parts.
• Sandblasting sizes up to 4.5 x 5 x 8 m, even small parts.
• Installation of machinery
• Delivery of inbaufertigen machine parts.

We are re-certified annually in accordance with DIN EN 9002 by Det Norske Veritas. Our first certification took place in 1995.

METALPRESS: 50 YEARS OF EXPERIENCE IN SHEET METAL WORKING AND FORMING Metalpress is a subcontracting company, based in Verona – Italy, specialising in cold forming and deep drawing and in particular in the production of D-type and E-type dished ends. We mainly process stainless and carbon steel through the use of mechanical and hydraulic presses. Since 2007 we have been certified according to UNI EN ISO 9001:2015 guarantee full monitoring and traceability of the production process: from raw material ordering all the way to after-sales service. In 2020 we also obtained AD 2000 W0 and PED 2014/68/EU certification for the processing of carbon steel for the production of dished heads. We are active in many sectors: our bottom are used in the bathroom hot water industry, food&beverage, chemical-pharmaceutical and cryogenic sectors. In the industry for the production of tanks, pressure vessels and LNG tanks, and in the production of braziers, pumps and household appliances. We provide a washing and degreasing service on request. We carry out various types of edging, drilling (both central and lateral) and we also make flanged bottoms, fixing the flange by mechanical seaming, without welding. Our technicians are able to analyse the feasibility of each single formed part, offering specialised advice for each type of product. Our Quality Department is able to carry out any type of tests or measurements, with particular focus on tolerances and final thicknesses. On request, the CP-CPK values are checked to obtain free-pass supply approval. The automation of processes and the integration of systems in an Industry 4.0 perspective have allowed us to improve production performance by guaranteeing a more efficient and customised service.

DLK Ventilatoren GmbH has had experience since 1974 and is now actively represented on the international market. We therefore also offer you an enormous range of products for axial fans. As the most common fan, especially in the areas of industry and air supply, ventilation and more, the axial fan is particularly in demand because of the high air throughput. Our production focus is on the low-pressure and medium-pressure fans. You will find axial fans in a wide variety of designs and sizes with the corresponding efficiency and the required frequency. The fans are equipped with safe explosion protection. The usual size ranges from 315 to 2500 mm. When the axial fans are at a standstill, the angle of attack can be continuously adjusted. The high-quality housing as well as the impellers and blades are permanently resistant to corrosion. All axial fans of the basic series can be delivered directly from us in the versions presented here.Our stocks are constantly being adapted to the growing requirements of our customers. For the delivery of special fans with special requirements, simply contact us. Here, too, we meet all customer requests as quickly as possible. With DLK you can rely on the highest and most reliable quality. With many years of experience as a manufacturer and on the basis of the latest ventilation technology, DLK develops centrifugal fans for use in areas where particular efficiency is required when increasing pressure in relation to the amount of air. The centrifugal fan can be adapted particularly well to many special requirements. With the wide range of our centrifugal fans, a particularly large number of different areas of application can be covered. We offer fans with backward curved blades from our range. Depending on the design and series, our basic range includes centrifugal fans with and without housing.With our basic series for centrifugal fans you can choose between the versions of the fans with direct drive for the blower, with belt drive and the version built-in fan with direct drive. All centrifugal fans we manufacture have the required certifications. You can order the series of the standardized programs listed here directly from us. With us, production and stocks are optimally adapted to market requirements for all products. If you would like special fans, please contact us and let us know your order requirements. Even if you would like to order specific special designs, we endeavor to supply our customers as quickly as possible.

The medium-sized company specializes in the professional cutting of ferrous and non-ferrous metals with the help of CNC turning and milling technology. Sheet metal forming and the production and assembly of components as well as modern control and measurement technology are also part of its portfolio. Its core business includes the mass production of small and large batches, the machining of large parts with a length of up to 8 m, jig and fixture construction as well as the welding of aluminum and stainless steel with rail certification. Huss also stands for innovation We’re constantly improving our company and our products. That’s why Huss Maschinenbau invests into research and development in the technological sector. Our work revolves around the processing of wearresistant materials, for example, ceramics and their compounds with metallic components. Huss Maschinenbau is your competent partner when it comes to metal cutting – for a perfect fit.

Our company was founded 40 years ago, founded in 1967 by Gerhard Debus. We started with 5 employees and the production of basement windows. Gradually changing the products and the company has grown steadily, so that we now employ in the fields of metal forming technology and equipment, approximately 50 employees. Numerous extensions we currently have the following production facilities: * 12 deep drawing presses up to 900 tons * 5 edge processing machines, punching and press brakes * 1 spinning lathe * 1 Trumatic punching Nippler and several panel and circular shears * 1 Brennschneidanlage * Welding robot GMF and circular shears Forming In metal forming, custom, tool-specific sheet metal parts are pressed, stamped, cold formed, deep-drawn, bent and welded. We mainly steel grades in grade S235 JRG 2, DD11 - 13, DC 01, P265 GH to 10 mm thickness, as well as all common types of stainless steel 14301, 1.4404, 1.4571 to 6 mm thickness. Our products find application in the fields of mechanical engineering, eg in Agriculture, Construction, control engineering, food industry, electrical industry and crane construction, especially we are in the production of container flooring for the apparatus and container, as well as specialized heating. Device technology We have over 25 years experience in establishing systems for the food industry. Starting with butchery and catering equipment from aluminum and stainless steel, we have continuously developed for all lines of furniture, equipment and engineering. Today we supply butchers, hotel and catering, self-service stores and catering companies, laboratories, clinics and special facilities for pathologies. For our customers, we are always dynamically, friendly, flexible, reliable, fast and inexpensive. The fact that more than 80% of our customers for more than 10 years are regular customers at us, speaks to our fairness, loyalty and continuity in partnership with Call our. We would be pleased to be working for your company, please contact us.

Your partner for sheet metal processing - competent, innovative and flexible! As a specialist in our field, we offer a wide range of manufacturing and machining options. Thanks to our state-of-the-art machinery, we are able to manufacture, process and coat components cost-effectively, quickly, on time and with a high quality standard. Whether individual parts, small series, large series, circuit boards, bent or welded structures, up to complete assembly, with the highest standards of quality and performance. Quality assurance goes without saying. The company's own 3D construction processes all common file formats. Of course, we also design in-house to optimize production. Together with our qualified staff, we offer you high-quality products from prototypes to series-ready products. We are looking for personal contact with our customers, scrutinize all wishes and concerns. Expert contacts and friendliness in all areas are part of our corporate philosophy.

VDL Industrial Modules is a contract-engineering and contract-manufacturing firm specialized in development and production of modules and systems for OEM's. Development, Production and Assembly is all under ONE roof, therefor information- and knowledge sharing is optimised with all the benefits for our customers. VDL Industrial Modules offers in-house application expertise in the field of "weighing, cooling/heating, positioning and design of frames and covering". VDL Industrial Modules delivers to various market segments and produces small to medium series. We would like to explore how VDL can be of service for you. Please contact sales@vdlindustrialmodules.nl or call +31 492 50 58 00.

The TAWESCO is leading producer of tools, metals stampings, weldments mainly for the automotive industry but also trucks, agriculture and forestry machinery, mostly heavy weldments including surface treatment and welding fixtures. Key figures: • All in one solution under one roof (DESIGN – TOOLING – STAMPING – WELDING) • Turnover about 78 mil. EUR in 2019 • 950 employees • Production area about 50 000 sqm in Koprivnice near Ostrava city • Tradition since 1850 as TATRA Trucks production • Quality management: EN ISO 9001:2015, IATF 16949:2016, VDA 6.4., ISO 14001:2015, ISO 3834-2 • CAD-CAM Capaility: AutoCad, Catia V5, Autodesk Inventor, IDEAS, AutoForm Tawesco competitive advantage: "All under one roof ": stamping + welding + tooling + design Stamping: • Metal and aluminium stampings for automotive industry up to 50 kg • Mechanical, eccentric, progressive and transfer presses up to 2000 kg • Press breaks up to 8 m Welding: • Weldments for automotive - spot and laser welding • Heavy weldments for trucks, agriculture, forestry and municipal machines • Robot, automatic, semi-automatic and manual welding • 2D/3D laser cutting Tooling and design: • Welding and machining jigs up to 15 m • Tools for forming, bending and perforation of steel sheets up to 50 T • Milling centres, drilling and grinding machines • Try-out hydraulic presses 1250 T and 2500 T Quality management: EN ISO 9001, IATF 16949, VDA 6.4., ISO 14001, ISO 3834-2. References: 1. John Deere, Kemper, CLAAS, KION- Linde Material Handling, Fenwick 2. TATRA Trucks, IVECO 3. SKODA Auto, Audi, VW, Bentley, Daimler 4. GESTAMP, SNOP, TIBERINA