The ... Vielfätigkeit of mechanical engineering. For 35 years, our company has been working in the engineering industry. Always the goal in mind, independent and flexible manufacture our workpieces and to expand our product range, we manufacture to the highest quality standards and precision. With a modern and versatile machinery, we offer our customers experience and commitment in the development and production of their mission. Our handicraft business with about 20 employees specializing in the manufacture of parts, components and assemblies; manufacture both single and serial production are possible. We process a wide variety of metals and plastics - from 3D - CAD - design to the finished product. We design and manufacture - take your product ready for installation in reception, thus saving costs and time. As an experienced Hertseller of turned and milled parts in machinery and mold with a variety of materials, we guarantee quality, precision and flexibility. With CNC machines from renowned manufacturers in the field of machining, we produce from prototype to series production of technically demanding parts with consistent quality in 2D and 3D. Our modern CNC lathes are equipped with automatic bar feeder, driven tools, Y-axis and sub-spindle, so they allow the individual and series production of complex parts in a single pass. New in our machine park is a 5 - axis "Millturn" machining center with which we completely finished workpieces in one set-up, which leads to a significant reduction of the idle times and the precision significantly increases. With corresponding 5 - a pallet exchange system and a total of 90 tool places, we are well prepared for series production. - CNC Milling - 3-D mold - Vermessarbeiten and quality control
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1978
    Certifications
    Mario Fernando Group s.r.l. is an Italian company specialized in the cold deformation of metal sheet, in particular of stainless steel and aluminium. with over 55 years of experience in the planning and construction of high quality dies our aim is to become a model for the processing of metal sheet. We can realize dies for drawing, deep drawing, bending, trimming and blanking, according to the customer's drawing. Mario Fernando Group s.r.l. offers the mass production of metal stamped parts: the dies are realized according to our customers drawings and the production managed to meet the customer’s requirements. Our company proposes innovative solutions to the most complex technical problems becoming partner of our customer for the whole process of transforming an idea into a mass production work, even with the design of special machines according to our customers’ production needs, to give support that goes beyond the tool realization. This is what we mean with partnership. Our company is ISO 9001:2015 and and IATF 16949:2016 certified.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1967
    Certifications
    ISO 9001:2015
    For over 40 years, we are now a well-known partner in the industry, the crafts, the exclusive trade, and selected service providers. We offer laser cutting from simple to complex assemblies highest quality solutions and deliver worldwide. Our great strength lies in the wide range of our manufacturing capabilities: For heavy machinery, precision parts or sophisticated decorative items - with everything we have years of experience. Our Services: - Laser cutting - Stamping - Nibbling - Edge - Welding (Approval DIN EN 15085-2) - Drilling / threading - Spot welding - Stud Welding - Rivets - Pressing - Mounting ... Our process chain we supplement with long-term partners to meet all requirements: In the foreground are surface treatments such as powder coating, wet paint, Kepla coat, polishing, grinding, and all galvanic coatings. Machining operations of all kinds, from the simple to the complex welding chamfer milling or turning part will be integrated into the production process.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1966
    Certifications
    EN 15085

    Watch

    Techpilot Premium Member
    PMT GmbH
    Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials. We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more! We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2005
    Certifications
    ISO 9001:2008

    Watch

    Techpilot Premium Member
    ADMET
    Comprehensive services in the field of: production of metal products; sheet metal and steel processing; welding; painting; galvanizing. We manufacture products and services for clients from all over Europe. Our clients include large, medium and small companies from various industries and sectors. Qualified and experienced staff and modern and extensive machine park guarantee high quality of products and services. We provide reliable service, fast contact and comprehensive maintenance services: - Manufacture of metal products - Metal sheet processing - Steel sheet processing - Welding - Painting
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2004
    Certifications
    Metalkor’s core competence is plate conformation, especially laser cutting. Metalkor was founded in 1999 and is ISO 9001:2015 certified. Around 35 employees work for the company in the Júndiz Business Park in Vitoria-Gasteiz in northern Spain. We offer contract manufacturing, from individual parts to large series. Thanks to our experienced staff and modern machinery, we can offer our customers integrated solutions in the following sheet metal working processes: - Laser cutting and punching in one operation - Shearing and bending CNC - NC cutting and pressing - MIG and TIG welding. - Robotic and precision welding In addition, we also take care of the final processing of the metal parts: - Galvanised, zinc plated, brown burnished, tempered and painted (epoxy or liquid), etc. If necessary, we organise the transport of the products to our customers. Further information can be found at: www.lasermetalkor.com
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1999
    Certifications
    ISO 9001:2015
    WKK Kaltbrunn AG - enormously in form The beginning of the WKK Brunn AG is founded in 1967. As a dedicated tooling the company had at that time only one purpose: the production of cutting, bending and forming tools. Shortly thereafter, the fabrication shop was put into operation and some ten years later, the company introduced her first own product. By continuity, innovation and perfection was out of the formerly peaceful Toolmaking a successful SME with about 45 employees.Today, the CHP is an international punching operation with most modern manufacturing methods in the supplier sector. enormously complete - from the first idea to the final series, we offer comprehensive services - Consulting: individual and professional, on-site or at our - Construction: in-house with 3D Autodesk Inventor - Prototyping: short to illustrate your ideas - Tool: for punching tool and teaching building, with modern machinery - Series production: stamping products of all types up to 250 tons of pressure and up to 300 mm width at 3 mm thickness (up to 5 mm after consultation) made of steel, stainless steel, non-ferrous and light metals - Component manufacture: Total manufacturer of your products, automated assembly - Post-Processing: Heat and surface treatments for partners near - Finish machining: by machining (milling, turning, drilling), eroding and vibratory finishing - Did you know? Also welding
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1967
    Certifications
    ISO 9001:2015
    Sheet metal specialist Blech Berma is an all-round provider for sheet metal and lightweight construction from prototypes to medium series. The production of our core consists of laser cutting, punching, folding and welding. We also offer many auxiliary processes such as spot welding, rolling, inserts, saw grains and drums. Berma is also a real all-rounder when it comes to materials: from 0.5 to 12 mm, steel or stainless steel with brass or up to pre-painted plate, Berma has experience and in most cases also at home. We also handle a lot of pipes, tubes and profiles. Because we, we cannot have a wide range of products for our customers specializing in a limited number of operations or certain materials. That's why Berma Blech is your specialist for all-round sheet metal.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1986
    Certifications
    ISO 9001:2015
    About us Kreutz & Mock is a medium-sized company and the leading manufacturers of wire bending parts of all types. With over 3000 different articles we can offer our customers a wide and diverse range of different wire products. The necessary machines for the production are developed and built in-house by our own engineering department which gives us the possibility to always be flexible according to our customer's needs. You can find further details about us and our philosophy on our website. Products We manufacture wire bending parts in all sorts of variations and models. We supply many industries with our products like the automotive industry, construction industry, agriculture, blinds manufacturers and many more. We also have numerous technical bent parts in our repertoire. We are happy to try to achieve your specific needs and requirements, because quality, punctuality and being in step with actual practice are our basic principles to deliver high quality as well as best functionality products. It does not matter whether they are single quantities, small quantities or a large series. We are flexible and deliver quality at fair conditions. We offer + Qualitycertficate DIN ISO 9001:2008 + in-house specified tool construction + in-house machinery construction + quick production of samples + technical and experienced know how + skilled telephone service + large production spectrum Materials Every material processed in our factory has a dedicated inspection certificate that will be provided with your delivery on request. We manufacture bent wire components for you in all variants and materials. Here a selection of the materials used: + Stainless steel wire 1.4301, 1.4310, 1.4362, 1.4401, 1.4404, 1.4571 in different tensile strengths + Spring steel wire 0.9 mm to 6.0 mm. Qualities A, B, C, D + Steel wire C9D bare or copper-plated. C9D soft galvanised in 1.0 mm to 8.0 mm + Crapal wire + Becrosi valve spring wire + Silver and Palladium wire
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1934
    Certifications
    ISO 9001:2008

    Watch

    Techpilot Premium Member
    Freen OÜ
    The production facilities of our new plant occupy 15,000 square meters, which allows us to provide almost all types of subcontractor services in the fields of mechanical engineering and metalworking. We work with ferrous, stainless steel and aluminum, both at the procurement and welding stages, and for processing via CNC machines. With years of experience in metal parts manufacturing, our trained professionals are ready to help you implement your production ideas into life and fulfill your business needs. Following the highest quality standards of production, we stay in line with all the necessary production certificates (EN 1090-2, ISO 9001:2015, ISO 3834-2) and quality management systems (such as Monitor ERP).
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2018
    Certifications
    DIN EN 1090
    The company Hermann Sefranek GmbH & Co. KG was founded in 1885 and is now run by the fifth generation. The company is specialized in sheet metal processing. The product range includes parts for suction, ventilation systems, pipes, special sheet metal parts and weldments. The possible processing methods include laser and plasma cutting, punching and nibbling, edges, and much more rounds Are processed steel, stainless steel, aluminum, titanium, copper, and other materials. We are happy to advise you in the design of components or construct them for you. With SolidWorks 2010, we have a powerful CAD system with which we can process all common file formats.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1885
    Certifications
    DIN EN 1090
    We are an innovative company has been established specialised in the sector of precision parts for machine construction. Customer orientation, quality, respectful labour relations. We are specialised in turning, milling, and grinding processes of mechanical parts.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1994
    Certifications
    ISO 9001:2008

    Watch

    Techpilot Premium Member
    Aquacut Kft.
    Products and services: - Abrasive waterjet cutting - Laser cutting - Semi-machining - Sheet metal bending - CNC machining - Welding - Manufacture of steel structures - Manufacture of equipment - Manufacture of machinery parts - Machine sawing up to max 520mm - Machining of tubes and pipes with through-feed grinding machines - Sheet metal rolling Know-how and technologies: The cutting technologies (waterjet cutting, laser cutting) used by AquaCut Ltd. not only achieve high precision and excellent cutting quality, but also the favourable price makes the company competitive, as they can assign the optimal cutting process for the production according to the target. Thanks to waterjet cutting, neither the composition of the raw material nor the lattice structure changes during machining. With the Dynamic Waterjet accessory, cuts can be made without angular errors and overruns up to 200 mm thickness on a wide range of materials such as metal, glass, stone, industrial ceramics, marble, granite, titanium alloys, multi-component materials, plastics, multi-layer materials, metal ceramics. With their top of the range laser cutting machine they can cut up to 4000mm x 2000mm maximum size up to 40mm thickness. The range of materials that can be laser cut is very wide. For example: carbon steel, stainless steel, alloy steels, aluminium and its alloys, copper and its alloys, bronze, etc. AquaCut not only cuts sheets, but also finishes the cuts to a high quality. With their edge bending machine with 320t pressure, they can bend up to 15mm thickness in 4m lengths. 15mm thickness can be rolled up to 2500mm width. With over a decade of experience, their certified welders assemble the structures the company manufactures, fabricated and documented to quality assurance requirements. As they keep in stock carbon steel, stainless, acid-resistant and aluminium plates from 1mm thickness up to 100mm, they are flexible and available to their partners at short notice. In 2020, they obtained the EN 1090-2 EXC 2 and EN ISO 3834-2 certifications, certified by the SLV Hannover representative in Hungary. In 2022, they were awarded ISO 9001, ISO 14001 and ISO 45001 certifications to confirm their precision and reliability. In 2023 they extended their certification to EN ISO 1090-2 EXC-3.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2003
    Certifications
    DIN EN 1090
    Located in Reggio Emilia, we are a young and dynamic company, specialized in industrial supplies. We are committed to providing a complete package to the customer, always using cutting-edge technologies and guaranteeing certifiable quality. We produce turning and milling parts complete with all the required heat or surface treatments. We are also active in the sheet metal sector through laser cutting, bending and welding. We also work with plastic and rubber materials through molding but also mechanical processing. Through the 3D Printing department we are able to support the customer also in the prototyping phases but also in mass production. Other services that distinguish us are Laser Marking, Design, the supply of Commercial Screws and Bolts and Internal Assembly.
    > Go to profile
    Employees
    Year of foundation
    2012
    Certifications
    ISO 9001:2015
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    2010
    Certifications
    ISO 9001:2008
    The company ABP - Innovative Sheet Metal Processing GmbH sets with the help of modern machinery and well-trained staff, new benchmarks in central Germany and consider writing. Why we? The site Schopsdorf is a well-situated location directly on the A2 motorway. Schopsdorf located in Saxony - Anhalt at the border with the state of Brandenburg. Galvanizer and powder coater located in the immediate neighborhood. Transport distances are short and thus favorable. ABP sees itself not only as a producer but also as a service provider. We are an advisory tätig, develop individual Kundenlösungen and rely on the latest technologies. We are offering the entire process chain of sheet metal processing in the position to offer our customers. Here, we also rely on strong partners from the immediate region. The mixture of our Fertigungsmöglichkeiten with consistently innovative thinking makes your advantage. -Quality product, flexibility and individuality imprinting our mission statement. We are your partner for their products. We offer: - Laser cutting 2D - Laser - tube processing - Bending / folding - Laser Welding - Robot welding - MIG / TIG welding - Processing in the wage - Assembly production - Individual solution finding
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2013
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    Cautis JB 93
    Cautis JB 93 GmbH was founded in 1993 by the Cautisanu family and is ISO 9001: 2015 certified. Even now our company is still family-run. After many years, the company has become one of the largest, best-known, most respected and competent companies in the branch on the Romanian market, with a lot of experience also in orders for export customers from the EU area. With the help of more than 80 permanent and very experienced employees, but also with a machine park that is regularly renewed, we are able to offer our customers professional solutions for the processing of various metals. In addition to our extensive experience in laser cutting and laser welding, we can also offer you bending, pressing, punching, milling, turning, spray painting and electrostatic painting, all from a single source. All of these specializations have helped us acquire many orders for the construction of special sheet metal constructions, for example in ambulances or fire engines. In addition, we have also, for example, in recent years. ecological garbage cans (with CE certification) and street furniture such as tables and chairs for Patios or park benches. If necessary, we can organize the transport of the products to the customer.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1993
    Certifications
    ISO 9001:2015
    Our company was established on 1993 and from 1996 it have their own production premisses ( about 2700 m2 ). We are stabilized czech company (only one owner – family), which are specialized on CNC cutting, laser cuting, CNC bending, folding, CNC perforating, blanking, punching - of many sorts of steel sheets - max. dimensions of sheet 1500 x 3000 mm - minimum thickness of sheet 0,5 mm carbon steel - thickness up to 20 mm stainless steel - thickness up to 15 mm brass, cooper, aluminium - thickness up to 12 mm, We also offer assemblings (+ press screws, nuts, studs, weld studs, nuts, screws) according customers drawings with including many kinds of weldings. In case of need, we can also organise any required or need of surface treatment ( powder coating, zinc plating, tumbling, glass blasting, .....) www.denip.cz, www.denipkiosk.cz (web page is also in languages - English, German, Frensh, Polish ) If you will need more information about us please let me know and we will answer you immediatelly or you can visit us at www.denip.cz or www.denipkiosk.cz
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1993
    Certifications
    ISO 9001:2008
    Dograr Metal is tube, section and sheet metal processing firm that was found in 1970’s as a family business and today, it is continuing its operations with 72 employees and broad selection of machinery in the quality level of ISO 9001:2015. Our major clienele from HVAC to machinery sector are placed in Italy, Germany, Switzerland, Finland, France and Poland. As of 2022, we are member of German-Turkish Chamber of Commerce.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1970
    Certifications
    ISO 9001:2015
    Your partner for fine sheet metal work - competent, innovative and flexible We are a family owned company in the field of sheet metal processing. As a system supplier, we specialize in the custom case production and the Production of sheet metal parts, assemblies and mechanical systems specializes. We manufacture the most modern equipment parts in the technologies stamping, punching lasers, laser (Trumpf), bending (trump), stud welding (Soyer) and Bolzeneinpressen (PEM, Haeger), milling (DMG), riveting, spot welding and welding. We have all the options to implement high-precision and highly complex designs. The own 3D design processes all common file formats. We design, of course, optimized for production in-house. We offer not only the powder coating on all major galvanic surfaces and screen printing. In our assembly we assemble electronic components to building complete electronic devices including commissioning, packaging and shipping. United with our qualified staff we offer you high quality products from prototypes to series production. B & S is a powerful partner from the idea to series production. We have the know-how, the capacity and the associated technology to deliver from simple stamping, laser part to the complex case or cabinet, all from one source.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    2003
    Certifications
    ISO 9001:2015
    We are a small, flexible company that through the special achievements in:
  • Laser Technology
  • Sheet Metal and Processing (round, edge, drill, ...)
  • Welding
  • successfully takes off in the marketplace. Satisfied customers are our best reference! Our location in southern Germany, just off the A7 motorway (Würzburg-Ulm) guarantees the best transport connections in a central location in the heart of the Swabian Alb. Our working style is characterized by quality consciousness, customer orientation and team spirit. The use of modern technology enables the highest product quality, precision and reliability. Technical know-how and qualified personnel create standards for the future. The high level of automation of our company ensures our clients efficient and on-time production in small and medium series.The material will be processed by us steel, stainless steel, aluminum and most diverse special materials. The production inspection and measurement guarantees a consistently high quality of our services. Benefit from our know-how. Get to know our diverse manufacturing capabilities in more detail and use our strengths to improve your competitiveness:
  • short lead times and dates
  • great flexibility
  • optimum quality of the products
  • favorable prices through high productivity
  • competent contact persons for each task.
  • Products Laser Technology: Mild to 25.0 mm material thickness Stainless steel: up to 20.0 mm material thickness Aluminum: up to 12.0 mm material thickness Sheet size: up to 1500 x 3000mm Of course, we can continue to edit each laser part, whether square or round. For details, see the section assemblies. Assemblies: from laser cutting to the deformation (edges and round) to complete welded assemblies including the desired surface, we offer complete solutions. Of course, we also take during production tasks such as development, design, product approvals and logistics. Welded assemblies: Whether sophisticated machine covers, complicated or container frame structures - our certified welding personnel ensures proper execution of your welding jobs. All welding work - whether butt welds or fillet welds are carried out according to relevant, or the standards demanded by our customers. Weld testing such as X, dye penetrant, etc are supplied according to requirements. Products for plant construction and process engineering: Tanks, cyclones, hoppers, tanks, compressed air tanks andsw Products for plant construction and process engineering: Pipes, elbows, branches, transition pieces, special parts, butterfly valves, gate valves, air flow regulators, diverters etc, We look forward to meeting you!
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2004
    Certifications
    DIN EN 1090

    Watch

    Techpilot Premium Member
    Komot d.o.o.
    www.komot.eu
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1989
    Certifications
    DIN EN 1090
    Othni employs about 100 people and manufactures over 6000 square meters of production space parts made of steel, stainless steel and aluminum sheet. We see ourselves as an active partner system. Customer proximity is lived. From the development, the first prototype of complex assemblies, through to series production, we offer our services. A certified quality management completes our range of services.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1996
    Certifications
    DIN 18800-7:20

    Watch

    Techpilot Premium Member
    Buechi AG
    Individuality and innovation - two tags that characterize the modern world of work. In our family the development of individual and holistic solutions for our customers for over eighty years program. With this philosophy, our company has successfully maintained on a challenging market. What has changed in that time, the technical possibilities. Thanks to modern means of production, the processing of sheet metal are virtually no limits today. A highly motivated team of around thirty-five employees would be to develop tailor-made solutions for our customers. A permanent training of employees and an innovative spirit development offer our customers the guarantee of a professional advice, reliability and quality. Outward sign of our high quality standards, the ISO 9001:2008 certification, which we have since 1996. Create and develop unusual, this is our daily challenge. Customer focus and experience are qualities which we have maintained for four generations in our company and want to keep up in the future.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1930
    Certifications
    EN 15085

    Watch

    Techpilot Premium Member
    Bileske GmbH
    We are manufacturing service providers for precision parts in the field of machining technology, as well as the related services. On-time delivery and compliance with the cost factor are a matter of course for us. Our customers, who have been completely satisfied for years, also trust in this. Individual and prototype or serial parts made of any material can be manufactured using modern technology according to customer requirements. Our goal is always to implement projects with the customer quickly, precisely and efficiently. A constant expansion of the machine park and the cooperation with the cooperation partners guarantee mass-blown solutions for the individual requirements of the customer. What can we do for you? We will be happy to make you an offer!
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2012
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    LINKIT LTD
    LINKIT LTD was established in 2011. The company is a marketing and project coordinator to approved OEM suppliers from Bulgaria and Romania. Our customers are companies in the construction, recycling and mining industry from Germany, UK, Ireland, France and Finland. We are specialized in welded constructions supply for construction machinery, road safety and handling equipment.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2011
    Certifications
    DIN EN 1090
    We are a medium-sized company in the field of metal processing. Our core competencies include the production of series parts and assemblies for industry and plant and mechanical engineering, in particular the food and beverage industry. For over 75 years, Lungmetall OHG has stood for efficiency, flexibility and competence in steel, stainless steel and aluminum. Whether individual or series production, with our modern machine park tailored to the requirements of our customers, we manufacture for you flexibly, inexpensively and quickly. We are lean enough to flexibly implement your ideas and wishes, but also large enough to provide you with the capacity you need, even for large series. Thanks to our high level of vertical integration, we appear on the market as a system supplier, as we are not dependent on other trades. This manifests itself in short delivery times and a high quality standard. With our currently 60 employees and our in-house design office, we offer you an extensive service portfolio and reliable processing of your orders! We would be happy to win you as a valued customer and assure you of a partnership and team-oriented cooperation.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1924
    Certifications
    DIN EN 1090
    The LST Laser & Controls GmbH & Co.KG was founded in 1995th Since we are one of the first addresses for customized sheet metal processing. Not only regional, but also Germany and Europe, we supply wide range of industries with sheet-sharing. Whether item, high-volume, board, bending or welded construction, to complete assembly, with the highest standards of quality and performance. Translation by Google Translate
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1995
    Certifications
    ISO 9001:2015
    We are a metal-working craft business with the advantages of a medium-sized company for 40 years, the second generation in the market. Flexibility, accuracy, timeliness are just a part of our strengths. Our customer base includes steel and engineering firms, manufacturers of special machines, piston manufacturers and retail customers. We process sheets from 0.5 to 160 mm thickness, profiles and pipes with a Konstruktionsgewischt from 100 gr to 5 tons of - Steel - stainless steel - aluminum - copper - Our qualified, experienced staff meet your tasks carefully and with high precision. Our products range from pure weldments on sheet metal parts, sheet metal panels complete, tubular structures, to install machined and finished part. In solving your technical problems, we are a competent partner for you.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1971
    Certifications
    metal cutting technology, Steel, stainless-, brass turning, milling, grinding, inductive hardening, assembling
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1969
    Certifications
    ISO 9001:2008
mehr anzeigen