3815 Suppliers found
List
Raster
Map
Sorted by 
Go to watch list 0

    Watch

    MCON Mechanical Construction GmbH

    Company description Looking the whole manufacturing from a single source? Put on the right partner, because it gives you the necessary freedom for your core business. Send us your drawing. We procure materials, rework the parts, ensure the coating and monitor the entire production process until you can use the pre-finished workpiece on time available. Mcon GmbH (Austria) has specialized as a supplier of high-quality production parts. With years of experience in mechanical engineering, we were able to establish ourselves very well in the domestic and European market. Our strengths are high quality associated with punctuality, expertise on our part as well as those of our contractors. With this basis, we like to solve your challenges! OUR SKILLS We put our focus on products that we have been perfecting. In order to offer our customers perfect products, we focus on the following areas of expertise: • Frästeile • Turned parts • weldments Especially in the mechanical engineering, plant engineering, transmission engineering, railway and traffic systems, renewable energy and medical customers appreciate our expertise, as well as the perfectly manufactured products and the fast service. Frästeile: Quantities: Small, medium and large series Dimension: Max. 500 x 1200 mm Material: Steel, stainless steel, nonferrous metals, plastics surface treatment Curing, painting, nitration, anodizing, coating, Brin Irish. Turned parts: Quantities: Small, medium and large series Dimension: Conventional machining: max. D = 220mm Material: Steel, stainless steel, nonferrous metals, plastics Surface treatment: possible in cooperation with long-standing and reliable partners Welding: Quantities: Small series Weight: Max. 3000 kg Material: Steel, stainless steel Welding Types: After method E111, TIG / 141, MIG / 131, MAG135 / 136 Welders have valid certificates according to EN 287/1 Surface treatment: possible in cooperation with long-time partners. Surface treatment: anodizing Chromium Blacking paint galvanize Wärmebechandlung: gas nitriding vacuum hardening are also possible on request quality responsibility "The customer comes back, not the product" So simple and clear aptly is our internal motto. Achieving this does not succeed by means of regulations, but only by really motivated and well trained staff. So is the ultimate goal for us to provide a secure future for employees and company. We intend to achieve by careful and constant growth of the company and by absolute customer satisfaction. Challenge us with your requests!
    > Read more
    Employees
    10 - 20
    Year of foundation
    2011
    Certifications

    Watch

    HSP Schwahlen GmbH

    HSP Schwahlen GmbH was founded in 1945. From on 1951 the production had been focused on adapter and withdrawal sleeves being the basis of our current line. At the beginning of the eighties CNC production of goods having greater dimensions was introduced. HSP supplies all main bearing manufacturers as well as the larger distributors. The standard production range on adapter and withdrawal sleeves, nuts and locking devices is completed by optional hydraulic assistance, abnormal metric inner diameter or complete inch-sized sleeves as well as all specialties based on customer specifications. Besides this we manufacture hydraulic nuts as well as precisely turned and milled thin-walled parts. Since 2000 HSP is also manufacturing various kinds of cages for bearings from 100 - 4000 mm outer diameter in high quality, small lot sizes and variable material (brass, steel, bronze, aluminium, ...) according to customers requirements. In this segment we produce for all main bearing manufacturers. In addition to the production know-how HSP has continuously improved quality, logistics and administration. This leads to the high level of quality, delivery conditions and service of HSP. At our newly built production facility in Langenfeld, established in 2001 and in between extended several times, we manufacture with the latest technology including 3D-measuring equipment. The certification of the quality management system based on DIN EN ISO 9001 and of the environmental management system based on DIN EN ISO 14001 by Lloyd's Register Quality Assurance Limited underlines the endeavour to achieve highest possible precision and satisfaction of our customers as well as the best possible environmental sustainability. HSP product range The HSP production programme covers adapter and withdrawal sleeves, nuts and locking devices with 130 mm up to 3000 mm outer diameter and approx. 600 mm in length. Besides the standard we offer the following: • Sleeves with abnormal bores and threads, metric / inch dimensions, special materials, ... • Production according to customer specification respectively to drawings • Special surface treatment (e.g. phosphating) • Longterm packaging • Direct deliveries, global sourcing and other logistical add ons Standards of the HSP production • Adapter sleeves according to ISO 2982-1:1995 (-> DIN 5415:2009-05) • Withdrawal sleeves acc. to ISO 2982-1:1995 (-> DIN 5416:2009-05) • Nuts following ISO 2982-2:2001 (DIN 981:2009-05) • Locking devices acc. to DIN 5406 • Any standard or recommendation of customers by drawing or text Additional products Cages for bearings with complex milling and drilling processes up to 1750 mm outer diameter processed in five axis. HSP is not limited to any design according to customer requirements. Most ferrous material can be machined (brass, bronze, steel, aluminium, etc.).
    > Read more
    Employees
    50 - 100
    Year of foundation
    1945
    Certifications
    ISO 9001:2008

    Watch

    Josef Karel

    Ich habe" Josef Karel" 1990 als Einzelhandelsunternehmen mit Haushaltswaren und Elektronik gegründet. Trotz des starken Wettbewerbs und einer kleinen Stadt in Vysočina betrug der Umsatz Millionen Kronen pro Jahr. Aus persönlichen Gründen konzentrierte ich mich 2003 auf den Export von technischen Teilen nach Belgien. Im Laufe der Zeit kamen Kunden in Deutschland und den Niederlanden hinzu. Dieser Teil der Firma wurde 2012 von meinem Sohn übernommen und die ursprüngliche Firma Josef Karel wurde in zwei Unternehmen aufgeteilt. Heute konzentrierte sich die Bearbeitung auf das Fräsen von Aluminium und NE-Metallen, den Export von technischen Teilen und die Laserbeschriftung. Seit 2003 habe ich mich auf den Export von technischen Teilen konzentriert. Die Lieferungen erfolgen nach Belgien, Deutschland und in die Niederlande. Nach der Teilung des Unternehmens im Jahr 2012 übernahm Sohn Jakub das Geschäft. Es ist eine Kleinserienfertigung komplexer Dreh- oder Frästeile aus verschiedenen Materialien, einschließlich Kunststoffen. Die Teile sind sowohl für medizinische Geräte als auch für Unterbaugruppen bestimmt, beispielsweise für die Eisenbahnproduktion. Wir bearbeiten auf einer Fräsmaschine FANUC Robodrill AlfaD21LiB5 Technische Parameter: Vier-Achsen-Bearbeitung Verfahrweg der X-Y-Z-Achse: 700 x 400 x 330 (mm) Jogging der B-Achse 0,0001 Grad Spindeldrehzahl 24000 / min
    > Read more
    Employees
    < 5
    Year of foundation
    1990
    Certifications

    Watch

    MEA-proTecc GmbH Engineering parts ...

    Welcome to the world of precision parts We are pleased that we can imagine in this way with you a powerful supplier of CNC turned parts, CNC milling parts, bending parts, the complete CNC sheet metal and especially the mechanical assembly. In the area of ​​our assembly often diverse precision parts, such as aluminum machined parts, plastic machining parts, wire parts, laser cutting of stainless steel and metal stampings used to complete some complex mechanical + electro-mechanical assemblies. This in turn requires an extensive technology park ahead of puts us in a position to open up a very broad range of cutting and non-cutting metal and plastic processing, such as the manufacture of precision aluminum milling parts, brass turned parts, turned parts and laser blanks. This will open up with just a central partner considerable parts and technology spectrum in the field of precision parts. Although we sometimes are merely a supplier of CNC machined parts, CNC turning parts or bending parts, our tasks go beyond the mere delivery of structural parts by far. We are often a development partner for stamping parts, the CNC sheet metal and aluminum milled parts and also possess expertise in materials and technology experience. As a result, we are rather a QUALITY and COST OPTIMIZER. Customer satisfaction is our ultimate goal. Therefore, we are a value-added partner that ensures this requirement through comprehensive services, innovative technologies and reliable communication. This in turn leads to positive effects in the areas of cost reduction, security of supply and increase productivity. We are happy to provide you with reference products such as aluminum milled parts, brass turned parts, plastic machining parts and turned parts from our prior production and develop according to your requirements, for example, complex precision turning parts, stamping bending parts, wire parts or CNC turned parts.
    > Read more
    Employees
    20 - 50
    Year of foundation
    Certifications
    ISO 9001:2008
    TP Suche Banner

    Watch

    Schleicher Fahrzeugteile GmbH & Co. KG

    We are a leading manufacturer of camshafts, pump shafts and shafts of all kinds. We always find a solution for our customers - whether with large marine camshafts or small shafts for medical laboratory systems. Over 70 years of experience and the knowledge and organizational talent of our employees combine materials, machines and production processes in an ideal way to a quality-tested customer wave. In our new sawing center in the Penzberg plant, we custom saw steel rod material up to a diameter of max. 140 mm. Benefit from our experience and simply contact us for the possibilities of production in our house.
    > Read more
    Employees
    200 - 500
    Year of foundation
    1945
    Certifications
    ISO 9001:2015

    Watch

    HÄNI + CO. AG

    We produce with the most modern Machines for manufacturing pre-finished turned parts for customers in the automotive, electrical and medical (ISO / TS 16949, ISO 13485, ISO 14001). We process steel, nonferrous metals, aluminum, titanium and plastics, On ... lathes, single spindle, multiple spindle and rotary transfer machines, ... In diameters ranging from 1 to 42mm. For more information see www.hanitec.ch
    > Read more
    Employees
    100 - 200
    Year of foundation
    1939
    Certifications
    ISO 9001:2008

    Watch

    Rumpel & Cie

    see www.rumpel.ch
    > Read more
    Employees
    20 - 50
    Year of foundation
    1932
    Certifications
    ISO 9001:2008

    Watch

    Metallgusswerk Fritz Fischer

    Aluminium foundry All major aluminum casting alloys Chill casting in gravity and tilt casting Sand casting HWS molding machine molding box size 850 x 650 x 250/250 mm Heat Treatment Steel shot blasting Vibratory Grinding Machining: milling to 5-axis machines and turning
    > Read more
    Employees
    50 - 100
    Year of foundation
    1978
    Certifications
    ISO 9001:2015

    Watch

    Treschnak GmbH

    The firm Joh Treschnak was founded in 1978. She pursued from the beginning a two-pronged strategy based on metal products according to customers' drawings on the one hand and thermoplastic injection molded parts on the other. In line with the growing demands in the metal-processing area of ​​our machinery has been steadily expanded. The Ter Steege Groep 2003 took over its long-standing Liferanten and supports the company in their current business fields in full. By moving to the new factory buildings at the site Zollhausstraße 5 in 2004, the company also equips spatially for future requirements For more info you like to see at our presentation.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1978
    Certifications
    ISO 9001:2008

    Watch

    Jaeckel Modell- und Formenbau GmbH

    Measuring gauges; encapsulation tools; special devices - design department - milling department - assemble department - measuring department - Polyurethane competence centre * measuring gauges and fixtures * polyurethan encapsulation tools * special devices (joining, glueing, positioning, covering, edge folding, aktivating ...)
    > Read more
    Employees
    50 - 100
    Year of foundation
    1998
    Certifications
    ISO 9001:2015

    Watch

    Cut Solutions GmbH

    > Read more
    Employees
    < 5
    Year of foundation
    Certifications

    Watch

    Glenck Bischof AG Feingussteile MI...

    YOUR GENERAL CONTRACTOR FOR FORMING and MOLDING! FORGING, HOT PRESSES KALTFLIESSPRESSSEN, FREE FORM FORGING IN STEEL, STAINLESS, ALUMINUM, BUNTMETALL, TITAN, FLANGE, RING, TRIMS, Longitudinally PIPES, FEINGUSS, SAND CASTING, DIE CASTING MACHINING PARTS OF FORM PART, OR FROM THE FULL PROFILE
    > Read more
    Employees
    5 - 10
    Year of foundation
    1961
    Certifications
    ISO 9001:2008

    Watch

    RUDA-Metall GmbH

    RUDA-Metall GmbH The company RUDA-Metall GmbH was founded in 1982 and has its manufacturing focus in the area of technical stampings. Here components for the automotive industry and its suppliers and the electrical industry are manufactured for years. The modernized about 2 years ago vibratory finishing system, we can achieve the best results even for your parts. The tools are designed and manufactured in our own modern tooling. In 1994, with the company K.Fr. Brahm, consisting since 1868, a group of companies founded. The K.Fr. Brahm manufactures focus: furniture fittings, hinges, stampings for light domes, scaffolding, electrical parts, office furniture and fittings for the mirror industry. In order to work more efficiently and more cost effective for your customers in the future, the K.Fr. was Brahm 1-1-2006 integrated GmbH in the company RUDA metal. Our Lord Dannhorn (Dip.Ing. Engineering FH and Dipl. Economics FH), as well as our technicians and master craftsmen to support you in the optimal and cheapest design your parts.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1868
    Certifications
    ISO 9001:2008

    Watch

    Gehweiler und Lehn Maschinenbau

    The Gehweiler & Lehn Maschinenbau GmbH is a company of the customer-oriented contract manufacturing, which has been founded in 1989 by Georg Gehweiler and Charles Lehn. The company is certified according to DIN EN ISO 9001, DIN EN ISO 3834-2 and has the Manufacturer qualification class E DIN 18800-7. Right now you can with us a capacity of approximately 40 employees. The company is active in the following areas: Development, design and production of machines, devices and equipment to customer specifications. Plant and machinery Mounting in the fields of mechanical, hydraulic, pneumatic and electrical Single mounting Welding Machining
    > Read more
    Employees
    20 - 50
    Year of foundation
    1989
    Certifications
    DIN 18800-7:20

    Watch

    ETS Edelstahltechnik GmbH

    The ETS Stainless GmbH was founded in 1984 in Stuttgart as ETS Edelstahltechnik Stuttgart. We are a medium-sized company with 4 divisions - Stainless Steel Sheet Metal Working - Metal - Grating Manufacturing - Hot-dip galvanizing and currently employ approximately 60 employees. Our headquarters is located approximately 50 km south of Berlin.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1984
    Certifications
    DIN EN 1090
    TP Suche Banner

    Watch

    TechnoMetal s.r.l.

    Technomatel is specialized in welding and construction of welded structures in steel and aluminum. We are certified by Uni En Iso 9001 and Uni En Iso 3834-3. The welding is performed manually for small series and robotized for medium and large series.The welding processes available are mag, mig, tig. We are 40 employees. We are able to supply the product of metal carpentry complete also of surface treatments (cataphoresis coating, powder coating, electrolytic galvanizing and hot galvanizing).
    > Read more
    Employees
    20 - 50
    Year of foundation
    Certifications
    DIN EN ISO 3834

    Watch

    Elzacher Feinmechanik GmbH

    Precision Turned Parts - stainless steel as well as all machinable materials, preferably stainless and acid-resistant stainless steel - from 1.0 mm to 250 mm diameter parts length up to 450 mm Precision milled parts - to cube 400x400x400 mm Assemblies - Partial and complete assembly Standard Parts - from all machinable materials Heat treatment - and galvanic surface treatment according to customer
    > Read more
    Employees
    20 - 50
    Year of foundation
    1964
    Certifications
    ISO 9001:2008

    Watch

    alp GmbH

    Production plant for sheet metal parts
    > Read more
    Employees
    10 - 20
    Year of foundation
    2015
    Certifications

    Watch

    kmk Kunststofftechnik GmbH

    We welcome you at the company kmk-plastic GmbH! We are a privately owned company with core expertise injection / standard and multi-component injection molding (2 - and 3-K), monosandwich and tooling. Our customers come from various fields, such as automotive, consumer, cosmetics, garden industry and many others. Our machine park covers a range of 30-275 tons of clamping force, our modern two-component machines ranging up to 275 tons of clamping force. Our machines are provided with extensive peripherals (CNC-handling equipment), complicated withdrawals and special procedures (teaching programs, special processes of the turntable, alternating Kernzugfunktion, etc.) are possible. Our range of services covers the entire value chain from the drawing to the start of production and the subsequent series production. Together with long-time partner companies, we create the injection molding tools, jigs and lead where necessary surface treatment (painting, lasers) and Mondays through. From us the following Granules / raw materials are processed (selection) include: Polypropylene (PP Copo, homo), polyethylene (PE), polycarbonate (PC, clear, filled, unfilled), ABS (standard or high impact), polystyrene (PS), polyamide (PA6, PA6.6, filled, unfilled) TPE, POM, PC / ABS blend, etc. Tags: Injection molding, tools, tooling, mass production, multi-component injection molding, 1-K, 2-K, 3-K, ARBURG, DEMAG, handling, robotic sampling, mass production, project management, relocation, ISIR, 3-shift operation, turntable, assembly, surface, lasers, painting, consumer, automotive, garden industry, cosmetics, electrical, paints, approvals, sampling, prototypes, tooling procurement, China, quality assurance, measuring machine, optical measuring equipment, tensile testing, SPC, machine capability, automatic material supply We look forward to your inquiry!
    > Read more
    Employees
    10 - 20
    Year of foundation
    Certifications
    ISO 9001:2008

    Watch

    Spiko GmbH & Co. KG Dreh- und Fräst...

    As a medium-sized company, we specialize in the machining production of turned and milled parts. Our range of services is complemented by the installation of high quality components and assemblies. We take care of all logistical steps from procurement of materials to the required surface and heat treatments up to the fully-or storage-finished product. We exclusively manufacture according to customer's drawings and specifications. In a supplier partnership, we see ourselves not only as a supplier but as a service provider. Therefore, an important cornerstone of our primary target for us, quality, reliability, punctuality, flexibility and cooperation skills: customer satisfaction. • • • • Conventional turning CNC turning CNC milling • • • •
    > Read more
    Employees
    20 - 50
    Year of foundation
    1993
    Certifications
    ISO 9001:2008

    Watch

    Leichtmetall Andreas Rittel GmbH

    COMPANY Our extensive range for you: »Aluminium gravity die casting »Mold making, tool and fixture »Machining »Heat treatment of cast aluminum parts »X-ray inspection ��CNC sinker EDM »Installation of components and finished parts Due to the long-standing cooperation with competent suppliers, we can offer you the following services in addition: Powder coating, yellow chromating or vibratory finishing. Ask us. We will respond promptly. FOUNDRY In our foundry castings are produced in the mold gravity casting. We work with conventional casting techniques as well as with casting machines, casting machines and hydraulically controlled tilting casting machines. The unit weight of our castings have the wide range of 20 g to 22 kg. In order to reduce post-processing, it is possible to pour holes and cavities in front, and with cast-in. With the loading of sand cores, the requirement is created to manufacture large undercuts.A clean and coatable surface is an essential quality of our castings. Our quality philosophy is based on expertise and years of experience. Talk to us. We will find a solution to your problem. Examples of cast-in are: "Threaded bushing (brass steel stainless steel) »Bolt, Bushings »Setscrews »Various parts provided by the customer The material aluminum Aluminium offers the advantages of being very light and very resistant to corrosion. With aluminum, twisty, thin-walled, pressure-proof and vibration resistant castings can be manufactured. Whether DIN or special alloy, we refer all aluminum alloys directly from the smelter. If you wish, we can also provide a certificate of analysis of the different alloys available. TOOL Rittel our name stands for high quality in the field of tool and Kokillengusses. In order to produce a high quality, perfect casting, especially a highly accurate and precisely crafted mold is required.With our world-class high-tech machine tools, we are able to provide the highest precision. The following machines are available: "Conventional milling machines »2 CNC milling machines »3 CNC machining centers and »2 Errodiermaschinen. On the 5-axis machining center and the path-controlled Senkerrodiermaschine we are particularly proud. Through a network of our CNC machines and our machining centers are connected to a server. This creates a flawless data exchange between the two CAD / CAM workstations is guaranteed and we can not accept designs of our clients in the most popular data formats. PROCESSING Mechanical Production Milling machines, machining centers and CNC lathes at our disposal for the machining available. In the field of cast iron makes our many years of experience the highest level of accuracy and process reliability possible. In our mechanical production but workpieces are produced, which are not made of cast iron.Also in this area is the 5-axis machining center and the path-controlled Senkerrodiermaschine represents a special Assembly To meet the demands of the market, we have a few years ago on the assembly of components our range - with and without Castings - expanded. We take for you to place an order, picking and packing of purchased parts to ensure the timely delivery of the module.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1921/1980
    Certifications
    ISO 9001:2008

    Watch

    Viena International s.r.o.

    Let me introduce our company. We are a Slovak company,that major production programm is orientated to manufacturing of special and precise parts for machines,different kind of fixtures,stamping tools,dies / progressive tools,transfer tools/ We are a member of Rejlek Plastics Group in Wien,Austria. We offer you capacities and experience in design and production. Our production is for the costumers that are differnet tools and machine producers,special machine builders,working in a field of automotive industry,electrotechnical and furniture industry and in automatization of industrial manufacturing. If you are interested in cooperation with our company do not hesitate and call us. Yours sincerelly Viena International Slovakia
    > Read more
    Employees
    100 - 200
    Year of foundation
    1951
    Certifications
    ISO 9001:2015

    Watch

    JUMO GmbH & Co. KG

    In 1948 Moritz Kurt Juchheim founded the company M. K. Juchheim GmbH in Fulda, and started the production of high-quality glass and glass contact thermometers. The trade name JUMO is derived from the name of the founder (Juchheim, Moritz). The product spectrum was gradually expanded after 1950. In 1985 Bernhard Juchheim, son of the founder, took over general management. The mother company was renamed as JUMO GmbH & Co. KG in June 2003, to match the naming of the international subsidiaries. At the same time, Michael Juchheimwas appointed as C.E.O. with power of sole representation, as was his father, Bernhard. Now in the third generation of activity as a family-owned enterprise, JUMO has a staff of more than 2,200 employees throughout the group. It is very well established, with 5 subsidiaries in Germany, 24 foreign subsidiaries, and more than 40 agencies around the world. Today, the extensive product spectrum from JUMO covers components and system solutions for the measurement, control, recording and analysis of physical and chemical parameters. The products range from sensors for temperature, pressure and analytical measurement to the control and recording of measurement data. These instruments and systems are used in a very wide variety of sectors in the capital goods industries. The support of the two prefabrication divisions for metalworking and electronic modules provides the company with a fast, flexible response. And customers can acquire everything from a single source – from simple system modules to complex process software. JUMO does not restrict itself to offering standard items from large-scale production, but is always oriented to the needs and specifications of its customers. The company’s development department and the expertise of its employees facilitate individual customer solutions that meet the highest requirements for functionality, precision and easy-to-use operation. A global service network, consisting of 13 independent sites abroad with additional external service partners, ensures that JUMO is always close to the customer.
    > Read more
    Employees
    > 1000
    Year of foundation
    1948
    Certifications
    DIN EN ISO 3834

    Watch

    Cintas Metálicas S.A.

    Trade in semi-finished products (tubes, rods, tapes, Blecher) Cu-based Trading Dreheteilen brass, bronze, copper and other materials based on Cu (Other materials on request) Trading stampings brass, bronze, copper and other materials based on Cu (Other materials on request) Technical assistance in product development
    > Read more
    Employees
    20 - 50
    Year of foundation
    1992
    Certifications
    ISO 9001:2015

    Watch

    Reltas AG

    Our roots go to the BBC / ABB electron tube factory in Baden, later Lenzburg, back, which sold the ABB Group in 1993 to the Thomson CSF in France. In 1994, the manufacture of electron tubes was transferred to France, only the production of the mechanical parts for electron tubes, including the associated processes, remained in Switzerland and took place in Klingnau a new location. In subsequent years, new businesses have opened up and expanded continuously in Switzerland and neighboring countries. Then in 2009 was the transfer of the production of parts for electron tubes to France and the location Klingnau was taken over by the former Managing Director (Management Buy Out). We offer: Turn Mill Brazing Annealing Heat treatments in mixed gas as contract manufacturing
    > Read more
    Employees
    Year of foundation
    Certifications

    Watch

    Sur-Tech Surface Technology GmbH

    Sur-Tech Surface Technology GmbH is a medium-sized, owner-managed company in the west of the Thuringian Forest near Eisenach. We have adopted our specialization in the company name. We offer our customers the production and surface treatment of plastic parts. The spectrum ranges from painting over printing to laser marking.
    > Read more
    Employees
    100 - 200
    Year of foundation
    2009
    Certifications
    IATF 16949:2016

    Watch

    Barth & Neuffer GmbH (buna) Präzisi...

    For more than 60 years, we finished at the site in Altbach tool holders and customized designed products. Our production is oriented so that we are totally flexible in terms of delivery ans so we can offer at reasonable prices. Our production program includes the following tools cones HSK DIN69893 Form "A" through "F" in sizes up HSK25 HSK160 DIN69871 form "A" and "B", in sizes up to SK25 to SK60 MAS-403-BT form "A" and "B", in sizes up to BT30 to BT50 DIN2080, in sizes up to SK30 to SK60 DIN228 Form "A" and "B", in sizes morsetaper MK1 to MK6 and Metric Taper tool holders. For this tool taper we maintain adequate storage. The cone tool can be combined with the following tool systems. Shrink fit in various lengths and finely balanced, with or without set screws holes Chuck "Weldon" according DIN1835 "B" Chuck "System Whistle Notch" according DIN1835 "E" Collet Chuck System "Ortlieb" according DIN6388 Collet Chuck System "ER" according DIN6499 Morse Taper sleeves for DIN228 Morse Taper "A" and "B" Arbors in combination with length and transverse groove Shell Mill Arbors Arbors in long version e.g. for Hobbing Machine Grinding arbors for different manufacturers Checking bar with testcertificate NC-Drill Chuck with right and left rotation Tool holders for System ABS, HSK according DIN69893, and much other Tapers, Reductions and extensions of various systems such as tool HSK, ABS, etc. Quick shots and quick change chuck We also offer a comprehensive program of accessories for the offered tool systems: This particularly spacer for arbors according DIN2084 "A" / "B" / "C" / "D" / "E" in sizes up Inner ø8 to Innerø100 in thicknesses from 0.03 mm to 100mm In the field of modular tools, we produce tool holders and tool modules with ABS and ABS-N interface in sizes up from ABS25 to ABS100. Generally, we produce precision parts complete finished after drawing beginning at 1 piece. A further area of ​​our production includes the manufacture of rings and washers according to customer's request in small quantities. Here, we can manufacture spacers from a thickness of 0.03 mm to 1.00 mm and an outer diameter up to 140mm. Holes or grooves are also easy to implement. From a thickness of 1mm, we also produce customized rings with grooves and holes, non hardened, hardened, finished plane-parallel and inner and outer grinding. These rings and disks are produced in quantities beginning 30 pieces. Our production also deals with the manufacture and sale of recordings and adaptation systems or drill Drill chuck adapters for the power tool industry. Following systems and interfaces can be combined SDS-max and Hilti TE72-92 SDS-top SDS-plus and Hilti Te12-22 DH38YB Small or large spline Large or small triangular 19mm or 13mm hex Bitholder and spec. Recordings for Wacker, Makita, SPIT, etc. Please send us your inquiries
    > Read more
    Employees
    50 - 100
    Year of foundation
    1942
    Certifications
    ISO 9001:2008

    Watch

    SCHOCK GmbH Schrauben und Drehteile

    Quality connecting ... Anything but ordinary: Founded in 1991, the shock GmbH has etabiliert as drawing parts specialist with vast experience in the fastening, assembly and fastening technology. Through performance and quality of highly trained employees, our customers more than satisfied close sets. A great success, which we see as a guide for the future, because Swabian Tüftlertum, bodenstaendiges growth and professional service will remain our most important milestones. Whether as a training company or as a forward-looking company with an excellent reputation, we are rooted in our values, as well as always open to new ideas: for example, for your inquiries, to which we look forward. In this sense, we are updating our story, which always puts a traditionally at the center - the success of our clients including high-profile screws wholesalers and industrial large customers from different industries. Where other abwinken, we are happy for you to go to the starting line: rotary and stamped parts outside the norm, from small lot to the very large quantities. Whether high-quality fasteners such as screws, nuts or DIN / norm parts -. Their special requests are part of our standard, because we even away from the ordinary, the manufacture what you need. It is precisely this flexibility and customer orientation is characterized buns from: With certified quality we deliver to you as part of the production as well as cooperation with longstanding punctual, fast and reliable. The basis for this is our comprehensive know-how that has grown to more than 20 years and has shaped together with our German / European top quality industry's first-class reputation of the company "screws and turned parts Schock GmbH". And we are a little proud, but see this primarily as a commitment to anew to be present for our customers every day with Topp services - in the automotive sector by working with certified partners (at least ISO 9001:2008), which not only our high, but also the strictest requirements in accordance with ISO TS 16949 meet. With us it's all about (Precision) turned parts in standard and customized designs and DIN standard parts with special features. The focus of our core competency focus is on the quality of the advice, the variety of products to a wide variety of editing options with different surfaces and a high flexibility with regard to the economic quantities. Our range at a glance: DIN standard parts with special features: CN = peak (DIN EN ISO 4753), FO = studs without interference thread (DIN 962), etc. Processing: Depending on the accuracy and tolerance, we offer appropriate processing options. Our machinery ranging from CNC to NC. With additional manual work we can keep production costs low, since not always tolerances of 0.01 mm are required. Surfaces: Electroplating and heat treatments are just as important as electro galvanizing, hot-dip galvanizing, silver, gold, nickel plating, bronzing, phosphating, barrel finishing, zinc flake coatings (CrVI-free) and clamped / sticky thread fuses acc.DIN 267, Part 28 / DIN 267, Part 27, etc. Materials: Steel, stainless steel, nonferrous metals, plastics, special materials: 2.4952, Inconel, Hastelloy, Nimonic 80A, titanium (3.7035), tantalum, zirconium etc. Production program Turning: Precision turned parts with axial and vertical drilling and milling operations; hard turning; inner square, hexagon socket; keyways; milling contours in the diamete...
    > Read more
    Employees
    20 - 50
    Year of foundation
    1991
    Certifications
    ISO 9001:2008

    Watch

    MBN- Präzisionstechnik Ges.m.b.H.

    We produce precision mechanical components and assemblies in small to medium batch sizes. Next is a cleanroom class ISO 5 available. CNC turned parts CNC precision parts CNC milled parts Lohndrehereie Lohnfräsereie Precision Turned Parts Precision milled parts Electropolishing Laser marking
    > Read more
    Employees
    20 - 50
    Year of foundation
    2001
    Certifications
    ISO 9001:2008

    Watch

    Sinoquest International Trade Ltd.

    Since 1989, we've supplied machined, stamped and cast parts and assemblies to Motorola, API-Deltran (Koll Morgan), API-Getty (Elwood) and Wabash Controls. Danahe, Soloflex and other North American and European companies come to us too. We also offer plastic molded and rubber parts, as well as magnets and assemblies.

    There are five experienced senior engineers in our company. We can do engineering coordination and arrangements, production control, quality control, such as PPAP, SPC, per ISO9000 and QS9000, etc.

    We accept samples, drawings, and electronic format drawings, such as scanned drawings, PRO/E format, AutoCAD format, and Solidworks format. We can even help our customers to improve and finalize their designs with cost saving and feasible processes when requested.

    And as today's demand, we issue prompt production status information to our customers at weekly basis. Customer satisfaction has been our only service criteria.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1989
    Certifications
    ISO-TS 16949:2
    TP Suche Banner
Limit search by:
Region
Technologies
Materials
Company data
Industries
Certifications