Over 100 years ago William Pfleiderer founded his metal goods factory in Esslingen am Neckar. Today, in the third and fourth generation, the family supplies customers in the European and East Asian region. Its customers include all branches of industry which use formed without cutting sheet metal components in their products (power tools industry, automobile industry, mechanical engineering). Here the requirements vary from simple to complex stamping assembly. Through our years of experience we are able to meet any customer requirements. We support you in the production-oriented design of drawing, stamping, bending and progressive parts and welding and assembly units and recommend the appropriate starting material. Difficult geometries, manufacturing and assembly groups, small batches, batch sizes with millions of units, tight deadlines, just-in-time, Kanban, safety stocks, are a problem for many others. For Wilh. Pfleiderer means that the orientation of the diverse customer needs.With dedicated employees, particularly flexible production organization and advanced punching and forming, we are prepared for a variety of tasks. Drawing, pressing and stamping parts After drawing, sample or individual information we produce stamped and formed parts of metal (eg steel DC01, DC03, DC04, St, stainless steel 1.4301, 1.4310, 1.4404. 1.4571, brass CuZn, Ms63 copper, aluminum AIMg3, Al 99.5 ) including the complete sequence processing (scrubbing, barrel finishing, grinding) and treatment (hardening, tempering, coating, galvanizing, painting) in the lot size you want. The result is simple washers and brackets to highly precise shifting parts, moldings to the automotive industry and mechanical engineering, complex series of composite parts, cylindrical drawn parts, housing and much more. Assemblies We are the perfect contact for sophisticated assembly and / or installation work. You order a completely manufactured and tested component with only one contact.We manufacture the items, take over the logistics of procuring needed to buy or standard parts and assemble the whole thing. Benefit from our decades of experience in the field of welding and assembly units such as in protective and hoods for the power tools industry. In this field, we manufacture and assemble a wide variety of sizes and designs for many well-known manufacturers. We can do this rely on our large inventory of own drawing tools, cutting tools, jigs, etc., saving you huge costs.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1904
    Certifications
    ISO 9001:2015
    TOKARMET deals in the production of metal elements by machining on CNC lathes and mills. Highly qualified staff and years of experience in the field of machining makes us one of the most reliable companies in the region. We specialize in the production of parts, subassemblies and components for industrial automation, hydraulics and the gas industry. We are currently looking for regular customers in Western Europe. I would like to invite you to cooperation. Witold Piasecki - (owner)
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2001
    Certifications
    Versatility - through years of experience and openness to new ideas. Today MOUNTAIN METAL OHG was founded in 1980 by Mr. Alfons Berg as a sole proprietorship. In 1994 the opening of a branch factory in Oberwiehl and thus the expansion of the power spectrum in sheet metal processing. The establishment of a partnership made in 1999 by the introduction of the individual enterprise and the participation of Mr Andreas Berg, who since 1993 has been an employee of the company. Managing Partners are Alfonso and Andreas Berg. Dedicated and technically skilled staff, supported by a powerful technical equipment enable quality and on-time reliable results that meet the individual requirements of our customers. With the sum of our experience of over 30 years, creativity and flexibility, we develop optimized overall and advanced detail solutions. Robot Welding Welding Welding Robot welding welded constructions sheet metal forming sheet metal processing milling turning machining sheet metal structures large milling parts assemblies burnouts combustion engine burning operation Abkantarbeiten cut profiles industry profiles structural steel welding welding TIG MIG MAG Stud Welding Drawn Arc Capacitor discharge machining stainless steel engineering tool steel plasma cutting plasma system plasma cutting parts sheet steel processing 16Mo3 Hardox 1.4301 1.4571 1.4404
    > Go to profile
    Employees
    Year of foundation
    1980
    Certifications
    DIN 18800-7:20
    We are a company with over 20 years of experience in the supply of custom mechanical components.(specialized in supplying custom mechanical components with over 20 years of experience.) We take care of your supply needs from the moment we receive your request for quotation until the shipment from our warehouse. Once your request for an offer has been received, we take care of: 1) Identify the most suitable technology to reduce costs and create complex parts 2) Dialogue with suitable and economically competitive suppliers 3) Let us introduce you to our best offer Once your purchase order has been received, we take care of: 4) Follow the sampling and certification phase of the product 5) Manage production advances in accordance with the required timelines When the goods arrive at our warehouse, we will take care of: 6) Perform a statistical check in acceptance 7) Pack and ship the goods according to your needs 8) Manage reorder quantities from a Kanban perspective We can provide finished items that require multiple processes such as: > Heat treatments > Surface treatments > Additional processing (e.g.: assembly, shooting, rectification, etc.) We are able to offer this service thanks to our mechanical and procurement skills, to our structure in northeastern Italy and to a network of production partners present in Italy and Asia. We are fluent in Italian, German and English. Contact us to learn about our team, our technologies and our prices.
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2004
    Certifications
    ISO 9001:2008
    see our Web site at: www.lauble-drehteile.de
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1965
    Certifications
    ISO 9001:2008
    Our high-quality production is based on precision, flexibility and innovative workflows. We place great value on a high quality standard. With our modern machinery for milling and EDM technology, we are able to offer a wide range of tasks in a position - Including Hardening, - Grinding, - Polishing, - Coating or 3D milling. We manufacture parts for cutting tools, mold and complex parts for mechanical and able to meet the diverse requirement profiles. Latest programming systems ensure smooth operations in the data processing. All products are delivered on time on request by us.
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    1997
    Certifications
    ISO 9001:2015
    Elevate Your Machined Parts with PrintPack: Your Reliable Partner in Precision, Quality and Timing. At “Printpack Service” our engineering team has developed unique and innovative ways to get the most out of the CNC machining technology and developed excellent manufacturing skills for metal and plastic parts. With a commitment to excellence and a focus on delivering outstanding results, we take pride in our craftsmanship. Our CNC machines enables us to deliver more complex geometry parts for you. Our mastery of CNC turning techniques helps us achieve precision, faster turnaround times, and more versatile projects. Quality control: At our CNC shop, quality is our top priority. We have invested in cutting-edge equipment and maintain rigorous quality control standards to ensure that every part we produce meets the highest standards of precision. Reliable Timeliness: At PrintPack we understand the importance of on-time deliveries. You can count on us to meet your deadlines consistently, ensuring your projects progress smoothly and efficiently. Materials Ready When You Need Them: Our extensive warehouse is stocked with a wide range of materials, ready to be machined. This means no delays in starting your projects and faster delivery times.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2002
    Certifications
    IATF 16949:2016
    - Medium-sized enterprise - Year of foundation 2012 - Employees: Markus Wagmann (master precision mechanic / managing director) Josef Petzi (master precision mechanic) Tim Wagmann (trainee) Daniela Wagmann (accounting)
    > Go to profile
    Employees
    < 5
    Year of foundation
    2012
    Certifications
    ISO 9001:2015
    The know-how and decades of experience of our employees in sheet metal, Aluminum and steel processing ensure high-quality products and satisfied customers. The work of qualified specialists in the productive and administrative areas as well as high investments in the machine park guarantee the successful completion of the tasks assigned to us. The demands of the market are becoming more and more diverse. We are happy to face this challenge by fulfilling unusual customer requests ourselves fulfill to your satisfaction. BCK Metallverarbeitung GmbH processes sheet metal and stainless steel in thicknesses from 0.5 mm to 20 mm and aluminum sheets up to a thickness of 10 mm on a production area of 5,000 m2. Perfect processing of thin and thick sheet metal using innovative laser technology and CNC-controlled folding technology from the TRUMPF brand guarantee compliance with the highest quality standards. Combined with welding techniques in the field of e-welding, WIG, MIG and MAG, BCK offers itself as your partner for the production of ready-to-install assemblies.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1997
    Certifications
    ISO 9001:2008

    Watch

    Techpilot Premium Member
    MOTOSAM,a.s.
    Established in 1999, and previously part of 1 of 6 plants in Slovenska Armatúrka Myjava. We produce according to customer´s drawings turning parts. We have single and multispindle automats and CNC lathe machines, working with brass, steel, and stainless steel. Mass production is for parts from diameter 3 mm up to 14 mm and other parts up to 51 mm. Long parts we do on CNC sliding head machine_Citizen up to diameter 20mm. We produce parts for all branches of industry.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1999
    Certifications
    ISO 9001:2008
    In 1982, Peter Sedlak, the CNC machining technology with an employee and three machines in Schwäbisch Hall. Were produced turned parts in small and medium-sized batches. Over the next few years, additional machines were added. The number of employees rose steadily. An increased demand for pre-finished parts made the first purchase of a conventional milling machine and a CNC machining center later inevitable. So it was always close in the rented hall and the desire to own a larger hall and getting stronger. In December 1991, finally, the company moved to Untermünkheim-Enslingen so that in January 1992, production could be included in the new hall. The economic downturn slowed in subsequent years, the growth of the company. But it soon went up again. Until 2000, all machines were replaced with new, more modern. In 2000, the certification according to DIN EN ISO 9002 was carried out. As of January 2002, the company operates under a new name. Peter Sedlak and his longtime collaborator and master Friedrich Schiele founded the Hohenlohe precision parts GmbH. Today, 12 employees produce pre-finished parts and assemblies for many satisfied customers from different industries. Various grinding work, as well as heat and surface treatments we have them implemented by competent and reliable partners. The reward for good quality and very little complaints are our satisfied customers.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1982
    Certifications
    ISO 9001:2015
    As a family business, Stil Textil was founded in 1997 in Istanbul. The founders of the company later realized the great opportunities that the market for laser processing offers and as a result, the current company Stilteks Metal was founded in 2012 at its current location in Beylikdüzü. Thanks to the high quality of its products and services, the company is ISO 9001 certified since the first year after its founding. As the amount of the orders were rising, the company remained on the course of growth. Today Stilteks Metal owns a strong machine park consisting of 3 laser cutting machines, 3 press brakes, tube presses, milling machines and welding machines in an area of 1700 m2 Today Stilteks Metal with its experienced team provides support to its partners in various industries from automotive to construction industry. We create orders according to the wishes of our customers and advise them with our know-how during the entire process of the production. The company offers services such as laser cutting, bending, milling, welding and assembly.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2012
    Certifications
    ISO 9001:2008
    Planning, construction, manufacturing, repair and service We provide you with solutions for material testing, toolmaking and special machine construction. We can draw on a wide range of products that have already been designed and tried and tested in practice or implement individual developments for you. We are driven by finding suitable answers, precision in manufacturing and assembly, and a high level of customer satisfaction.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1970
    Certifications
    ISO 9001:2015
    Development of production of turned and milled parts Assembly high quality turned and milled parts Komponeten Automotive engineering Magnet Household industry Pulleys Waves Cover Driver Bolt Ring Jacks Disc
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1993
    Certifications
    IATF 16949:2016

    Watch

    Techpilot Premium Member
    LUTEX
    CNC TORQUE * CNC MILLING MACHINES Turned parts, milling parts from Lutex: Low-cost. Durable. Reliable. Dear Ladies and Gentlemen, Company Lutex manufactures parts quickly and economically just-in-time: according to drawing, From prototypes to series, from CNC turning parts to CNC milling parts. Qualities with which I convince: • High flexibility, even with short-term inquiries • Reliable customer service: from quotation, through to production and delivery • Cost-effective production with high quality The accompanying company brochure gives you an impression of my performance spectrum. One, I hope, positive impression, which I at a personal discussion or equal at A first order. You will find conditions on request immediately. CNC machines: CT 20 Gildermeister - turning D180mm L = 250mm / small series from 30 to 10000 pieces NEF480 Gildermeister - turning D480mm L = 1000mm CNC strojtos - milling - x = 500 / y = 320 / z = 360mm Lathe new - D500 / L1500 Gallery realization on: www.lutex-metale.eu Best regards, Lucjan Bulenda
    > Go to profile
    Employees
    < 5
    Year of foundation
    2015
    Certifications
    The Herbert Tiemann company was founded in Hamburg in 1962 and moved into its own production facility in Börnsen near Hamburg in 1998. In the beginning the company concerned with the production of electronic and electrical devices as well as the production of transformers and coils. In 1986, the company was expanded to include a further production area, "Plastic injection molding and mold tooling". We have many years of experience in injection molding and we are well equipped to implement your next project quickly and easily. We live cooperation based on partnership. We see ourselves not only as an implementing party, but also act as a consultant in which we examine each request individually. And if things have to be done quickly, we can also act as an extended workbench.
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    1962
    Certifications
    Welcome to CAD-Plast GmbH. We combine the latest standards with innovation and efficiency and combine the properties mentioned with years of experience and dynamism. In October 1999 a vision turned into a company. The trust in our competencies and the will to realize the ideas of our customers has paved this way for us. We face all challenges that the future demands with commitment and know-how, focusing on constant dynamism and progress for the benefit of our customers ... We manufacture with our team for our customers in the area Automotive Special mechanical engineering Medical technology Sporting goods in the fields of mechanical processing and mold construction as well as in plastics processing.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1999
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    Biltec AG
    The young company Biltec AG is a reliable and competent manufacturer of precision mechanical precision parts. BILTEC AG has a modern and technically advanced machinery for the machining of metals and plastics. Thanks to precision, innovation and reliability Biltec has made a reputation in various categories, but also in the optics industry not only in general engineering. Biltec AG is focused on the production of: • Standard parts • one-offs • Prototypes • Modules Biltec AG also provides support during the design phase for mechanical machined parts. We also perform construction work on behalf of customers through independent, if desired by our customers.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2002
    Certifications
    As a system supplier for electromechanical assemblies, we manufacture plastic and metal components using hybrid technology. This means that we concentrate on the production technologies of plastic injection moulding and punching and bending of metal components. The advantage for you is that you can obtain ready-assembled assemblies of the most diverse production processes from one source. By moving Friedrich Joerg GmbH in 2016 to newly built production and office premises, we were able to create a capacitive buffer. Thanks to a high degree of automation, we can offer you particularly competitive prices. We manufacture manually in small series up to large series fully automated and pre-assemble all components for you. In short, we adapt flexibly to your requirements. We provide support as early as the product development stage in order to take into account quality, cost and tool-specific aspects in the early phase. We manufacture the necessary tools or devices in our own tool shop. This also allows us to increase our flexibility, for example in case of short-term changes. Furthermore, we also offer finishing processes such as: printing on plastic parts (cliché/pad printing), hot foil stamping for a particularly noble appearance of the products, machining and ultrasonic welding. It goes without saying that we are certified according to ISO 9001:2015 and deliver a very high and consistent quality. We would be pleased if you contact us. categories: Electromechanical assemblies; Foil hot stamping; Customised plastic mouldings; Plastic optical fibres; Optical fibre components; Optical fibre systems; Optical fibre technology; Optical fibre transmission systems; Pre-assembly Assembly of small parts for industry; Assembly of plastic components; Assembly of mechanical components; Stamp-bending parts made of stainless steel, non-ferrous metal, steel; Stamp-bending tools; Connectors; Connectors for surface mounting; Complete plug connections; Pad printing; Thermoplastic precision mouldings; Thermoplastic overmoulding with plastic; ultrasonic welding of plastics; overmoulding tools for insert parts; 3-D MID components; connecting terminals for power cables low voltage & high voltage; component assembly; die casting; mould making; housings for the electrical industry; terminals for electrical cables; plastic injection moulded parts; plastic injection moulded parts with metal insert; electrotechnical plastic parts; technical plastic parts; plastic processing; multi-component injection-moulded parts; plastic-injected metal parts; product development; prototype construction; terminal blocks; technical injection-moulded parts; thermoplastic elastomer (TPE) moulded parts; jig and fixture construction; toolmaking; two-component injection-moulded parts; Imprint: https://www.friedrich-joerg.com/kontakt/impressum/ Privacy policy: https://www.friedrich-joerg.com/kontakt/datenschutzerklaerung/
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1920
    Certifications
    ISO 9001:2015
    You would like to make metallic components additive? Are you interested in the possibilities of this technology? With the additive manufacturing of 3D-printing metal (SLM, Laser-cusing®, DMLS etc.) we offer you a production technology that is no longer used only in prototype production. This process offers completely new possibilities where conventional processes such as laser cutting, turning or milling reach their limits. This is a process that is used exclusively for the production of metal. As with 3D printing, the components are built up by layer-by-layer build-up and fusion of metal powder; the component has almost identical mechanical properties to the original material. You need support in implementing your automation project? Then you are exactly right with us! We realize complete manufacturing cells according to your idea. From the feasibility study on the construction and assembly to commissioning and on-site support, we are the right partner for your project. In particular, we cover the following areas of responsibility: - Project Management - Programming - 3D printing metal (additive manufacturing) - Security management - 3D scanning - Milling technology - Construction - Assembly - Hose packages - Service - Training Our 3D metal printing services at a glance: - construction work (cooling ducts, component optimization, etc.) - Checking the cooling channel design (flow simulation, thermal images, flow analyzes) - coatings - Plastic prototypes - Component measurement - Creation of plastic models - 3D scanning / reverse engineering - fine machining (milling, grinding, eroding etc.) - Surface treatment (anodizing, electropolishing, etc.) - hardening - welding
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    Certifications
    We are a company with more than 100 employees in Velbert - the city of locks and hardware. Since 1980 we manufacture zinc die castings for various industries. Focus here is on the automotive and shop as well as sanitary, furniture lock and window fittings. Surface parts with various electroplated coatings as well as technical cast as one of our strengths. Because we place great emphasis on intensive customer guidance in the context of product development, we can assure a cost-effective and reliable production. A lean operating organization ensures an above-average short delivery times and a high degree of flexibility. We would be pleased to provide you with even prove our efficiency.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1972
    Certifications
    ISO 9001:2015
    We Henkel-Metallwaren are a company established in 1990 and modern equipped CNC production. We guarantee flexibility and punctuality with high quality. At www.henkel-metallwaren.de you can get an overview of our company and machinery.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1990
    Certifications
    THE COMPANY The company TEPRO Precision Technology GmbH has been producing for over 25 years and stands for quality, flexibility and versatility when it comes to the treatment and processing of steel, stainless steel, aluminum and other materials. Our customers appreciate the high quality of our work, our response times for product changes and general deliveries as well as the versatility of our range of services. CUSTOMER TESTIMONIALS + PRESENCE Consistent project organization and systematic way of working provide transparency and information value safe in every phase of a project. The use of modern working methods and techniques as well as continuous professional development of all our employees is a matter of course for us. Despite high specialization we speak the language of our clients and project partners. LASER CUTTING - PLATES The technology of modern systems is becoming increasingly complex and places high demands on a comprehensive understanding of the system. Solutions are needed that integrate components from complex manufacturing processes. Our comprehensive understanding of the system we have provided in a variety of projects to demonstrate, with which the background experience and the professional profile of our employees share. For the production of medium and large series, we have laser systems is synchronous two parts can be finished simultaneously. Also a wide variety of moldings can be edited on our machines. In our warehouse continuously located our standard materials such as steel, stainless steel and aluminum in the form of plates and cold-rolled strip bars in various sizes and thicknesses. LASER CUTTING - PIPES Laser cutting of round and rectangular tubes as well as the process of various Profielen has always been an integral part of our vertical integration. Our Bystronic laser system has an integrated rotary axis. With these conditions, we can deal with complex contours and various breakthroughs with only one setup.With rectangular tubes, it is possible to cut us contours of the corners. MACHINING Our extensive editing options and the powerful machinery create space for your disposition. In your planning, we are on your side and work rationalization potential for your products to strengthen your market position. We offer all the possibilities of mechanical processing and stand for reliability at the highest quality level: - Drilling - Deburring - Tapping - Vibratory Finishing - Rub - Roller straightening - Lower Working closely with qualified and capable partner companies we can offer through our range of production services in addition all mechanical and other fields. - Turning - Milling - Glow - Hardening - Surface finishing - Grinding - Sand and glass bead blasting BENDING With our press brakes complex components are brought up to a partial length of 2100 mm in the form of 3-point bending technique.Our experienced staff guarantee the highest precision through continuous training. With this know-how, we also want to bring your products high-end in the form. VERBINDUNGSTECHNIK With our large vertical integration, we are able to add your demanding products from a single source and to weld. This range of welding processes are applied. Depending on the material, geometry, and application are available to us for this purpose the following procedures. - Welding MIG-MAG - TIG welding (including aluminum) - Come up the ...
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1983
    Certifications
    ISO 9001:2015
    SYS Pres company is metal fabrication company which spealizes in laser cutting, laser welding, welding, bending, and surface treatment operations. Surface treatments are automatic sand blasting, zinc plate, copper plate and etc. SYS Pres company's facility is 3000 sq. Our export countries are Austria, Germany, England, Netherlands, Belgium, Israel.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1992
    Certifications
    ISO 9001:2015
    What one associates with us:
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1994
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    Glatec EOOD
    Glatec is your reliable partner for manufacturing subassemblies from metal. Glatec collaborates with companies from the electronic, machine building, home appliance and furniture industries. Glatec is one of the leading producers of fittings for beds and kitchen appliances in Europe. Our production is set up for manufacturing components and subassemblies in order quantities from 5000 to 500’000 articles. This allows us to react promptly and flexibly to your requirements. We focus on processing sheet metal, varying in thickness from 1 to 5 mm, coils up to 400 mm wide. We operate three automatic feed presses with a pressure range from 630 to 2500 kN. For separate operations, presses varying from 100 to 2500 kN in force are available. Stamping, bending and progressive dies are designed and produced in our own tool making shop. We also produce our automation solutions inhouse. For quality assurance 3D measuring equipment is available in-house. All CNC controls are linked into the company network. Programming of the machines is done with NX CAM Express.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    2005
    Certifications
    DIN EN ISO 3834
    DS-Technic designs, builds, programs and commissions workstations and production lines. We also offer modification, modernization and service of existing machines and implementation of new types of products on existing lines. We have our own tool shop equipped with the latest equipment and a laboratory equipped with a precise 3D measuring machine. Thanks to them, we produce parts for the devices we design as well as elements for customers, both on the basis of the documentation provided and use of reverse engineering. We encourage you to establish cooperation in the field of not only designing and manufacturing entire production lines, but also making elements that require milling, die-sinking EDM and welding. We undertake to make details both in single and prototype production, for e.g. inaccessible spare parts for machines, or serial production regardless of the degree of complexity. We also offer CMM measurements of finished parts. We offer special solutions, tailored strictly to the requirements of customers, developed through deep technological analysis, and then creating a solution concept which evolves in close cooperation with the client. This approach ensures achievement of contractual goals. We have extensive experience in cooperation with renowned companies, mainly from the automotive industry, but not only. We offer the following services: • CNC milling, • Turning • Grinding • Die-sinking EDM, • Welding • CMM and optical measurements. Machinery: DMG CNC milling centers: DMU 1150V: 3-axis with working area 1150x700x550 [mm] DMU70 eVolution: 5-axis with travel 750x600x520 [mm]. Die-sink EDM SODICK AG60L with the possibility of machining a workpiece with dimensions of 950x740x450 [mm] Conventional lathes with machinability (dia.x length) 450 x 1500 [mm] Surface grinder with dimension max. 200x600 [mm] Roller grinder (dia.x length) 250 x1100 [mm] Hole grinder (dia.x length) 200 x200 [mm] MIG/MAG/TIG welding We provide high quality of workmanship thanks to our own measurement laboratory, equipped with: • Mitutoyo Crysta Apex V9106 – 3D coordinate measuring machine – measuring range 900 x 1000 x 600 mm • Mitutoyo QUICK-SCOPE QS-L 3017Z – vision measuring system • Mitutoyo HR-320MS – stationary hardness tester • Mitutoyo SJ-411 Portable Roughness Tester, equipped with touch screen and integrated printer • Mitutoyo LH-600E digital altimeter • Mitutoyo granite slab class 00 dimensions:2000x1000x220 [mm] • Mitutoyo sets: diameters, micrometers, reference plates, depth gauges, sensors, digital calipers We encourage you to send inquiries to the produkcja@ds-technic.com address. We guarantee quality and punctuality. Website: www.ds-technic.com We will be grateful for the opportunity to present our services more widely at your headquarters. If you have any questions, don't hesitate to contact us directly.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2011
    Certifications
    JOBO Spezial-Maschinen GmbH was founded in 2012 at the Vechta location. A manufacturing facility with an associated office building was built here in 2015. As a young company, JOBO would like to establish itself as a manufacturer of machines for the national and international market in the near future. Particular attention should be paid to the optimization of existing and the development of new concepts for machines for use in swamp or moorland areas. In addition, JOBO will deal with systems and equipment for the oil field industry, pipeline laying and controlled drilling technology. JOBO will work out the customer-specific special solutions that are often required here together with the respective customers. JOBO's range is supplemented by the areas of procurement and trading of equipment and devices from the above-mentioned segments on the international market. JOBO employees with the necessary experience in the respective specialist areas are available to implement all of these tasks and goals. In the future, JOBO will continue to supplement and expand the workforce with competent employees. JOBO hopes to be able to offer young people an apprenticeship position in the future
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2012
    Certifications
    We are company with family traditon. The most important thing for us is quality of our products and ofcourse satisfaciton of buyers. In our machin park we have: -AMADA LASER (which is up to all requirements of today's market) We are using two different lasers. One only for inox/aluminium and second just for steel. -AMADA PUNCHING MACHINE VIPROS 368 KING (One of the best punching machine on the market, with extream precision and speed whis is up to all tasks. And have 33 Tons of preassure. -AMADA BENDING MACHINE ( Our machine have 8 AXIS so there is nothing we can't produce) WELDING (We are welding all materials INOX/ALUMINIUM/STEEL with TIG and MIG/MAG Procedure) As a company we like new challanges. We are able to produce all kinds of products from start to their final look. We are always trying to make the best for our customers. Mail: lukamarkun@inoxsystems.si Tel: +386 70 896 933
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    Certifications
    ISO 9001:2015
    Using its experience gained from a long-standing tradition in massive forming and subsequent machining, Schmiedetechnik Plettenberg produces high-precision components for international customers in the automotive and non-automotive sectors.
    > Go to profile
    Employees
    500 - 1000
    Year of foundation
    1892
    Certifications
    IATF 16949:2016
mehr anzeigen