4188 Suppliers found
List
Raster
Map
Sorted by 

    Watch

    Ningbo Yinzhou Gain Machinery Co.,Ltd

    Ningbo Yinzhou Gain Machinery Co., Ltd., is a manufacturing enterprise focusing on design, development & production of one-stop service. Mainly engaged in high-precision OEM parts production. Gain Machinery Specializes in the production of stainless steel 304, 316L, duplex stainless steel 2205, stainless iron, alloy copper, aluminum, alloy steel and other materials. The product diameter is 0.5mm-500mm, tolerance can reach 0.005mm, Surface texture can reach 0.02μ. We passed ISO9001 / TS16949 quality management system certification. The Products cover auto parts, medical treatment, aerospace, electronics and other fields, exported to Japan, Israel & other Asian countries and Germany, the United States, Canada & other European and American countries. In year 2021, Automatic Mechanical Arm CNC equipment reach at our factory, improving the production efficiency and capacity a lot, especial for big quantity products. It brings us reducing production cost, short delivery time, steady quality. Fully equipped can service for medium and high quality product requirement. A complete quality control system help us to supply qualified products, and won good feedback from clients. So trust Ningbo Yinzhou Gain Machinery Co.,Ltd would be your best choice and business cooperator in future. https://gainmachinery.en.made-in-china.com
    > Read more
    Employees
    100 - 200
    Year of foundation
    2005
    Certifications
    IATF 16949:2016

    Watch

    Beutter Präzisions-Komponenten GmbH...

    Your expert for complicated components and very critical applicationsBeutter is a supplier of fine mechanical components with a high production depth in small batch series. • Beutter was founded in 1909, and is located in Baden-Württemberg, very close to the A81 motorway, 60km south of Stuttgart. • We have about 125 employees. Of our production staff, over 90 % are skilled workers. • We have the capability to perform, in-house, all machining processes (turning, milling, grinding, honing), while for special processes and surface and heat treatment processes we use competent third-party suppliers. • For us, the ideal is small- to medium-sized production runs with a lot size of between 20 and 1,000 pieces. • Beutter is particularly capable within the manufacturing of components with close production tolerances. • We process all machinable materials, and are particularly experienced in processing high-alloyed steels (stainless steel, V2A, V4A, 1.4441, 17-4PH), titanium and special materials (inconel, hasteloy, Ni-base alloy, chromium molybdenum steel, tantalum, platinum-iridium, PEEK). • Our main fields of activity are: Medical technology, aeronautics, hydraulics, military engineering, mechanical engineering and measuring equipment technology. • Our quality management system is certified according to DIN EN ISO 9001:2008, DIN EN 13485 (medical products) and DIN EN ISO 9100 (aeronautics). • We can process your data via our CAD system “SolidWorks“.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1909
    Certifications
    ISO 9001:2015

    Watch

    Anant GmbH

    The Anant GmbH is a marketing subsidiary for own products & representation for few well-selected Indian manufacturing units. We have a good knowledge + experience for quality systems & supervised manufacturing outsourcing from India. Our German representation offers a potential to take up a responsibility to supply the article as door delivered & being your contact/contract partner. whereas our Indian technical team offers possibly of economical in-house manufacturing as well as local outsourcing under our supervision & our own quality control. At Patel Technomation - India, We have the experience and capability of sub-contract CNC machining including supply/procuring of foundry and forging products in small batches as well in large quantity. We follow the TÜV SÜD ISO 9001-2000 quality system and are dedicated to providing excellent customer service, and the timely delivery of quality products. Our Manufacturing unit is located at major Auto-parts manufacturing, Casting, Forging & engineering hub in India; which offers us a good development possibility for any specific/special part manufacturing possibility in a most economical manner.
    > Read more
    Employees
    200 - 500
    Year of foundation
    2006
    Certifications
    ISO 9001:2015

    Watch

    Shenzhen Wangdefu hardware and plas...

    WONDERFUL HARDWARE Manufacture CO., LIMITED is a complex group, and specializes in the MANUFACTURING metal parts, turning parts, machining parts, stamping parts, casting parts, automotive components including mechanical parts and electronic parts by CNC machine and stamping machine and products mould. WONDERFUL has strong manufacturing and sourcing capability, the headquarter locates in Hongkong and factories locate in Shenzhen Special Economical Zone, China. the manufacturing bases and suppliers are mainly in the southern and eastern China, most of the products are exported to the Europe, America, Korea, Japan and partially supplied to the domestic market.
    > Read more
    Employees
    100 - 200
    Year of foundation
    2003
    Certifications
    ISO 9001:2015

    Watch

    Gröbmer GmbH

    The ... Vielfätigkeit of mechanical engineering. For 35 years, our company has been working in the engineering industry. Always the goal in mind, independent and flexible manufacture our workpieces and to expand our product range, we manufacture to the highest quality standards and precision. With a modern and versatile machinery, we offer our customers experience and commitment in the development and production of their mission. Our handicraft business with about 20 employees specializing in the manufacture of parts, components and assemblies; manufacture both single and serial production are possible. We process a wide variety of metals and plastics - from 3D - CAD - design to the finished product. We design and manufacture - take your product ready for installation in reception, thus saving costs and time. As an experienced Hertseller of turned and milled parts in machinery and mold with a variety of materials, we guarantee quality, precision and flexibility. With CNC machines from renowned manufacturers in the field of machining, we produce from prototype to series production of technically demanding parts with consistent quality in 2D and 3D. Our modern CNC lathes are equipped with automatic bar feeder, driven tools, Y-axis and sub-spindle, so they allow the individual and series production of complex parts in a single pass. New in our machine park is a 5 - axis "Millturn" machining center with which we completely finished workpieces in one set-up, which leads to a significant reduction of the idle times and the precision significantly increases. With corresponding 5 - a pallet exchange system and a total of 90 tool places, we are well prepared for series production. - CNC Milling - 3-D mold - Vermessarbeiten and quality control
    > Read more
    Employees
    5 - 10
    Year of foundation
    1978
    Certifications

    Watch

    Trico AG

    The TRICO AG - A small business, which is characterized by quality and flexibility. For Präzisionsdrehteile of all kinds, the TRICO AG is the right partner. We process various materials of up to Ø1.0mm Ø34.0mm.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1984
    Certifications
    ISO 9001:2015

    Watch

    Linhardt GmbH & Co KG

    LINHARDT toolmaking, come to us - whether with data, a sketch, a technical drawing, a picture or a workpiece. We help you! Milling / turning / eroding / grinding / assembly
    > Read more
    Employees
    50 - 100
    Year of foundation
    1943
    Certifications
    ISO 9001:2015

    Watch

    LOMAN s.r.o.

    We are a modern family enterprise. We are the producer of high quality serial and piece components for engineering industry, mainly specialized in manufacturing and delivery CNC machined parts, welded parts and machined castings. We produce according to customers technical documentation.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2002
    Certifications
    ISO 9001:2015

    Watch

    Goodwill Precision Machinery (Germa...

    Goodwill Precision Machinery Co.,Ltd (GPM),is a China manufacture established in 2004, Specialized in offering precision machining service for non-standard mechanical parts, spare parts, metal fabrication, precision welding, design & assembly, fixture and jigs with supplied drawings, prototype,CNC precision machining,customed machining parts...... Manage our company with ISO9001:2008 , TS16949 ,ISO13485 .ISO14001 certificated, customized ERP & Barcode Scan System. Our advantages: Easy to communicate in English,German,Japanese One Package Services Fast lead time Stable Quality Rigorous work attitude No quantity limited
    > Read more
    Employees
    500 - 1000
    Year of foundation
    2004
    Certifications
    IATF 16949:2016

    Watch

    MA-MICROMEC SRL

    Ma-Micromec Srl, is a company specialized in the production of precision turned metal parts for industries of various sectors: automation, electronic-electrical engineering, plastic materials, pneumatic-hydraulic and many other sectors. Ma-Micromec Srl is a new company in the sector but is able to guarantee quality and reliability in production thanks to the skills handed down and acquired by past generations. The technicians, all highly specialized, make their experience available to be able to professionally produce products with high quality standards. Ma-Micromec Srl, thanks to the use of modern technologies, has the ability to produce high-precision articles made on CNC mobile head lathes and cams with a bar passage from 1.5 to 25 mm.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2015
    Certifications
    ISO 9001:2015

    Watch

    TECHNOMETAL-Orfanidis EE (lp)

    We provide machining services of unit parts, prototypes and short-run production. Problem-solving and provision of suitable machining solutions are what we do best. Our customers trust us because we are flexible with their enquiries and requirements, we deliver on-time and offer short- delivery times. This is what makes us stand out from the rest. The precision parts that we produced are known for its top quality, due to the raw materials used. Our experienced and passionate personnel carry a high sense of responsibility towards our customers and their product. We continue our expansion and growth, especially in technological developments. Our precision components are manufactured according to customer drawings, specifications and international standards. Design and production by reverse engineering method is also provided as a service. And finally, we offer competitive pricing, guaranteed!
    > Read more
    Employees
    10 - 20
    Year of foundation
    1986
    Certifications
    ISO 9001:2015

    Watch

    PRO CNC GmbH & Co. KG CNC-Fertigung...

    "A systematic approach to solution" The company PRO CNC GmbH & Co. KG was founded on 01.12.1990 by Michael Pfeiff under the name Michael Pfeiff. The company's headquarters was first in Varl and was moved in 1994 after Luebbecke. On 01.09.2003, the company was acquired by the current owner Volker Meier kink and then operated under the name Pfeiff toolmaking. Since 01.09.2013 we now operate under PRO CNC GmbH & Co. KG - Production Engineering and Mechanical Engineering. Mr. Meier is one kink with the company since the very beginning. The company PRO CNC GmbH & Co. KG deals with the full range of mechanical manufacturing (turning, milling, drilling, grinding) and the assembly of components and machines. Focus here is the contract manufacturing in the milling, especially the production of small parts. Cubic parts up to an edge length of 1000x600mm currently can be handled in-house CNC PRO GmbH & Co. KG. The company PRO CNC GmbH & Co. KG is able to deliver to the customer from the initial sample to mass production all.The range of parts includes the classic item to automobiles mass part. Is manufactured to eleven computer-controlled machine tools and machining centers the latest generation with up to four axes and two spindles. Some of the machines are equipped with rotary tables change. As a manufacturer, we would like to mention, among others, Bridgeport, Brother, YCM and Swabian machine tools here. The rotation range is among other things a lathe with driven tools, Y-axis and bar feeder (Biglia B650Y-turning diameter over bed max. 400mm) are available. Programming is based on dialogue and DIN controllers and by means of a CAD-CAM work on SolidWorks basis. Currently, the company PRO CNC GmbH & Co. KG two masters, a mechanical engineer, eight skilled workers, five assistants and a force in the commercial sector employs. The customer base includes about 30 customers from all sectors of the craft and the industry (electrical, mechanical, automobiles, pharmaceuticals, chemicals) in regional areas. Its customers include names like: VW, AEG, Federal Mogul, Faurecia (automotive sector) Harting, IMA, Kolbus, Oystar (engineering sector) VTG wagon Graaff, EuroMaint Rail (rail-rail vehicles) In May 2004, the company has been certified according to DIN ISO 9001-2000 since 2010, accordingly to DIN-ISO 9001-2008.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1989
    Certifications
    ISO 9001:2015

    Watch

    CGS S.r.l.

    CGS Srl is born as artisan company at the end of the sixties to assume, more and more, in the years a real industrial structure; currently it occupies an area of 1500 square meters where work about twenty employees. CGS manufactures a wide range of products including precision components and small parts, drawing fittings for the earthmoving industry, agricultural machinery and oleodynamic systems, as well as components ready for a wide range of industries; They complete the range of transmission organs such as angle heads and jacks and magnetic devices, solenoids and rigators. Thanks to decades of experience and the sensibility and attention for the demands of the clients, CGS Srl is able to offer personalized solutions and high quality by ensuring advice and assistance in the phase of pre-sale until delivery. The technological adjustment and the continuous search of operation models more and more to the state-of-the-art allow CGS to propose to the own clients efficient and effective solutions both beginning from the particulars present in catalog and beginning from the sketches and from the specific applications of the clients. This approach based on the support to the client and aimed to the flexibility allows CGS to affirm its own presence on the Italian and European market more and more. Turning, finishing and treatments CGS is equipped with two production units that perform all the necessary turning operations, organizing overlapping production to ensure a total daily production capacity of approximately 60,000 hours on 17 turning centers. CGS Srl is able to realize precision components with diameter between 3 and 70 mm; the worked materials embrace the whole range of the automatic steels,from reclamation, cementation and good part of the stainless further to brass, aluminium, bronze, copper and plastic materials. Finishing works CGS also has a specialized department in the following stages of finishing: - Reaming, Tumbling, Milling with No 2 vertical machining centers, Lapping, Countersink, Deburring, Surface rolling, Assembling with the possible management of commercial components or supplied by the customer, Micropunting Marking. Grinding processes The department designated about grinding works performs the following manufacturings: - Centerless and Plunge grinding with tolerance of 3-5 microns and roundness of 50% tolerance - Grinding on centers, surfaces, centerless and superfinishings where tolerances are outside of what we can obtain internally. CGS guarantees accurate control of the quality of the works implemented, and therefore of the finished detail delivered to the customer. Washing the parts with ultrasonic and vacuum technology - For all the details that need to treated, they are washed at the CGS production department, before starting the external treatment required to obtain the best result in terms of quality and efficacy of the treatment itself; - All untreated ferrous items are delivered after a suitable washing phase during which a protective substance is applied, with a guaranteed 3-month standard length, which can be extended on request.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2008
    Certifications
    ISO 9001:2015

    Watch

    PMT GmbH

    Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials. We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more! We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2005
    Certifications
    ISO 9001:2008

    Watch

    A.D.O. Zerspanungstechnik GmbH

    The family ADO was founded in 2001 and since then performs turning and milling of individual items, as well as to small and medium series by. The good cooperation with competent partners makes it possible also to offer our customers yet another addition service. These include round and flat grinding, all welding processes, laser and flame cutting and surface treatments and hardening process. In addition to a flawless, high-quality execution, our company is a fast, economical and flexible to the customer, which is enabled by our lean and efficient disposition. Due to our PPS system and the MDESystems we are able to individually adjust our production to our customers and respond to particular emergencies. Through this technique, we can guarantee our customers absolute punctuality in every situation. We guarantee the quality of our work you through competent and motivated employees.Through our clear mission run, the DIN EN ISO 9001:2008, we guarantee quality and punctuality. On request, we conduct a 100% inspection of parts. Machining Using the latest CNC technology, we are capable of meeting your requirements, whether single piece or series, to meet the highest quality. Quality assurance We guarantee the quality of our work you through competent and motivated employees. Through our clear mission run, the DIN EN ISO 9001:2008, we guarantee quality and punctuality. On request, we conduct a 100% inspection of parts. Measurement Quality is our highest demand - measured with the latest 3D coordinate metrology. Frästeile max. Length 1020 mm max. Width 650 mm max. Height 500 mm Turned parts max. Diameter 600 mm max. Length 800 mm Flange components max. Diameter 600.00 mm max. Length 800.00 mm Screws, connectors, and gears max.Diameter 600 mm max. Length 800 mm
    > Read more
    Employees
    10 - 20
    Year of foundation
    2001
    Certifications
    ISO 9001:2015

    Watch

    Qingdao Compass Hardware Co.,Ltd.

    We are manufacturer and exporter of customized parts, with machines in turning, milling, casting, stamping, welding, ect.. Located in port city Qingdao, it's convenien to arrange shipment no matter by sea, by express or by air. Welcome to contact us if you have inquiries, professional team will help with what you need.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2010
    Certifications
    ISO 9001:2015

    Watch

    SBS Group

    We, the SBS from Aalen, have been offering - in the truest sense of the word - precision in series for over 35 years. Founded by Friedrich Bollheimer, the company is now in the third generation. SBS combines the individuality and flexibility of a family business with distinctive technical know-how and the latest CNC production technology in the areas of turning, milling and assemblies. We provide our customers with advice from the manufacturer's point of view, from the prototype to the series of component parts, via an efficient supply chain. In addition to our high-quality machinery, we also have an assembly department. In addition to the production of precision components from prototypes to series parts, we take on complete process chains for our customers through to the implementation of system solutions. This enables us to offer you ready-to-install solutions. TO PLAN. TO DEVELOP. TO EDIT. TO USE. SBS.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1985
    Certifications
    ISO 9001:2015

    Watch

    Werner Rauscher - Feinmechanischer ...

    The company Rauscher has been active for different industries since 1984th The realization of specific customer requirements We achieve this through our modern and diverse machinery. Fully automated loading and unloading systems, we ensure a high Productivity in the production of turned parts. Do you have technical questions or want more detailed information? Then call us on the number 089/793 20 41, or send an email to: info@cnc-dreherei.com We advise you individually and in detail in your affairs. Translation by Google Translate
    > Read more
    Employees
    5 - 10
    Year of foundation
    1984
    Certifications
    ISO 9001:2015

    Watch

    Poltech Otomotiv Endüstri Makina

    POLTECH OTOMOTIV is a family-run company based in Istanbul/Bursa. As a supplier for well-known customers, we have specialized in the manufacture of complex turned and milled parts. Laser or plasma cuts? No problem! On request, we can even laser the product number onto your component. Our top priority is customer satisfaction. We trump with quality, price, organization, complete customs clearance and meeting deadlines. No hidden costs, no loopholes. Honest and authentic. You ask, we calculate, you decide. Our German-speaking contact person based in Germany ensures smooth communication.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2020
    Certifications
    ISO 9001:2015

    Watch

    Torneria Nicoletti Srl

    History: The Torneria Nicoletti is a mechanical turnery located in Trissino, near Vicenza that was founded in 1967 and has 4 locations with about 5.000 square meters cover and employs more than 120 people. Capacity: Our company is specialized in the production of turned parts made in Steel, Stainless steel, Aluminium, Brass, and Copper, having a diameter range of diameter 3 to 150 We have got more than 60 turning machines, Multispindle, Singlespindle, CNC machine as double spindles and Sliding head. With these machineries, we are able to execute order from 10 parts to 3.0 Million and we produce more than 40 Million of turned pieces every year. To control our products we have eleven points of control with instruments connected to a computer where we use an SPC control, with this system, we are able to issue certificates of control with the measurement during the process and check the cp, cpk and cmk. Certification Our company has been certified ISO 9002 since 1996 by DNV and update the newest UNI EN ISO 9001:2015. And OHSAS 18001:2007 since 2013 and UNI EN ISO 14001 since begin 2019 Goals to supply products with a defect rate "tending to zero". to produce parts that satisfy specific use requirements with particular care for appearance and functionality. To respect delivery times Sector We export more 65% in all European countries and in a variety of sectors; including the automotive, car industries, bicycle and motorcycle, oil-pressure, thermohydraulics, pneumatics, hobby-accessory industries etc. If you need more information, you can visit our website or you can call me. If you would need some offer, please do not hesitate to send me an inquiry, I will be so glad to answer you as soon as possible.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1967
    Certifications
    ISO 9001:2015

    Watch

    Aloys Kleier GmbH & Co. KG

    The owner-managed company Aloys Kleier is a service company in the field of small-scale component manufacturing, hardware and electrical installation. As a cooperation partner of the industry, we bring by screws, rivets, welding and gluing together on 4000 m² of production space, what belongs together. In addition, our staff have many years of experience in the fabrication and installation of staircases, ramps and railings, pipelines, metal and welded constructions of all kinds Our range of services is complemented take over all activities of a classic Metallic, ie including sheet metal and metal processing including welding, Kant, drilling and sawing and we done quickly and efficiently. The customer gets to us all from one source. We service the products from purchasing to warehousing, manufacturing, assembly, logistics and all emerging problems. Flat hierarchies fast communication and flexible production methods are guaranteed. All orders we carry uncompromising from the complete satisfaction of the client. Partnership based on trust and maximum quality form the common success for both sides and are the basis for a long-term cooperation.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1982
    Certifications
    DIN EN 1090

    Watch

    Viewtrade is Part of Viewsoft Srl

    Consortium of companies operating in the development of foreign markets. It acts as sales department for the export of a number of small medium-sized industries located in the Veneto region, all operating in the sub-supply in the mechanical industry. Our partners can offer, among others, the following main operations: • Turning • Milling • Grinding • Gear Making • Cutting and bending of sheet metal • Sheet Metal Forming • Assembly • Complete Subassemblies Operative Office in Corso Fogazzaro - Vicenza IT
    > Read more
    Employees
    20 - 50
    Year of foundation
    2011
    Certifications
    DIN EN ISO 3834

    Watch

    Koutsogiannis LTD Steel Workshop

    Koutsogiannis LTD – Steel Workshop was founded in 1994 by Mr. Koutsogiannis and Ms. Christofi. The company has been active for 24 years in the fields of mechanical engineering and repairs, emphasizing in the high quality and fast delivery times. We are a company overlooking the sea, just 10 km from the port of Volos and above us the Mountain of Centaurs. We are a small team. Titles and positions are of secondary importance for us. Fostering long-term relationships with a diverse mix of latest technology and highly skilled employees. Building on our long experience and in-depth know-how proven in numerous reference projects. Team spirit is lived every day. We pull together in the same direction. Together we have overcome any economic crisis. We have no perfect marketing, but great products and a good advice for our customers. Our success is confidence in our people and not their control. Quality is the pride of every employee and not just a corporate goal. A machining piece which is supplied to the customer is at first a piece from Kostas, Giannis, Nikos etc., and only secondarily one from Koutsogiannis LTD. Customers are our friends and partners. Each employee is responsible for the future of Koutsogiannis LTD.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1994
    Certifications
    DIN EN 1090

    Watch

    TME Maschinenbau GmbH

    Since its inception in 1999 we have specialized in the manufacture of parts and series in the area of turning and milling, and are active throughout Europe. Regular investment in new technologies and manufacturing capabilities ensure optimal quality and customer satisfaction. Good Quality begins with a high-quality production equipment, efficient processes and a clear structure. Continuous development is the foundation of our success. We employ 35 employees in administration, construction and manufacturing. Join our 4 trainees for precision mechanics and in administration. The cooperation with TME is open, direct and uncomplicated. Our clients include companies in the areas of: Engineering, tooling, laser technology, and aerospace and automotive industries. Service overview Production / manufacture of components We manufacture parts, spare parts and small series to mass production according to your drawings or a pattern. Our machining capabilities include CNC-controlled milling, drilling, turning, wire EDM, surface grinding and conventional crafts and sheet metal processing. We can use our processing centers, parts machining, up to the size: L = about 2100, W= about 1000 B =, H = about 600 and up to a weight of 6500 lbs. Construction Design of tools, fixtures and equipment. 3D modeling for prototyping. Support for design tasks and advice on cost-effective and production-oriented manufacturing of your parts during development. CAD / CAM Acquisition and processing of all popular file formats such as : STEP, SAT, IGES, DWG and DXF programming with our CAM system. Welding / Heat treatment The welding of steel and heat treatment (hardening, tempering and annealing) are also of parts of the scope of our processing. Surface treatment Surface treatments, we can perform at our partner companies. Assembly Assembly of parts, components, tools and equipment. Reports On request, we create initial sample inspection reports and test protocols. Delivery We deliver your products on time with shipping or parcel service. We are a professional partner, trust TME!
    > Read more
    Employees
    20 - 50
    Year of foundation
    1999
    Certifications
    ISO 9001:2008

    Watch

    Kurutlu Technologies

    Established in 2004, Kurutlu Technologies is a leading CNC Precision Machining Service provider in Turkey. With 18 years of expertise in the field and high skilled production planning, Kurutlu can supply low and high volume of components including complex parts with its CNC milling and CNC turning services with 3-4-5 axis machining centers. The company is certified according to ISO 9001: 2015 and ISO 14001. Our Website is; www.kurutlu.com
    > Read more
    Employees
    50 - 100
    Year of foundation
    2004
    Certifications
    ISO 9001:2015

    Watch

    ELHA-MASCHINENBAU Liemke KG

    about us With the name LH (later ELHA), which is composed of the abbreviation for "Liemke Hövelhof", a company for the manufacture of machine tools for the wood and metal processing industry emerged around 1930 from an electrical trade. Today we are known for tailor-made machining centers, special machines and production modules. Many industries, including slewing bearing manufacturers, automobile manufacturers and their suppliers trust our experience and competence in the development and implementation of highly productive machining processes as well as the design and manufacture of mostly metal-cutting machine tools and turnkey solutions. Our 240 employees work responsibly on the constant improvement of product and service quality in order to guarantee reliability and maintainability. The satisfaction of our customers but also of our employees are our top priority. ELHA machines and manufacturing solutions are highly productive, reliable, high quality and durable. Our employees are enthusiastic professionals who accompany every step of your planned investment far beyond commissioning. We will provide you with the enthusiasm for the solution.
    > Read more
    Employees
    200 - 500
    Year of foundation
    1930
    Certifications
    ISO 9001:2015

    Watch

    Ungvári Works Kft

    UNGVÁRI WORKS Kft has been operating for 29 years. The company is a 100% hungarian-owned family business, it's founder and owner is Ferenc Ungvári. The company has 37 employees. The company's activity is the production of parts and components for the machine industry. Most of our product are manufactured in unique, small and medium quantities, our portfolio does not include mass-produced products. We supply 90% of our products to Western European machine manufacturers, we have clients in Germany, Austria, France, Switzerland and in Sweden. Presently, the production is performed in a plant with a floor space of 1200m2. In addition to our modern machinery and highly qualified colleagues, our production is supported by an integrated corporate management system, as well as by CAD and CAM softwares. Our processes are designed to satisfy the ISO 9001:2015 standard. Our activities: -machine parts and units production with CNC and traditional turning, milling and cutting technologies -welding -assembly -surface treathments -measurement -planning
    > Read more
    Employees
    20 - 50
    Year of foundation
    1990
    Certifications
    ISO 9001:2015

    Watch

    Peula UG haftungsbeschränkt

    CNC contract manufacturing, welding assemblies, individual parts, serial parts ORGANIZATION PLACE: GERMANY- Order logistics and deliveries through our own group transports up to twice a month. Goods are delivered with a German invoice, without further or hidden costs. PRODUCTION LOCATION- Bosnia and Herzegovina, EX-YU Läder MANY POSSIBILITIES- We combine our own production with our subcontractors' capacities in a pure source. Parts are carefully checked and only then delivered! STORAGE- In Germany (75417 Mühlacker) we can store any batches in advance, check them again and deliver at short notice! EXPERIENCE- Long-standing (over 20 years) experienced employees in various manufacturing processes. We have been delivering to our German customers for over 5 years. RESPONSIBILITY- Goods we deliver are insured, but we always accept sensible complaints and find a solution that suits everyone! Over 30 companies in Germany procure goods from us. POSITIVE THOUGHTS - our customers are slowly becoming our personal friends! Working with friends is fun, security and trust.
    > Read more
    Employees
    < 5
    Year of foundation
    2020
    Certifications

    Watch

    Baier Drehteile GmbH&Co.KG

    Manufacturer of series turned parts from all cut materials according to your specifications. In addition to being a reliable supplier, our major passion is the development of optimum solutions.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1971
    Certifications
    IATF 16949:2016

    Watch

    InterTechnic s.r.o.

    Inter Technic sro has developed in more than 5 years into a powerful company. If you are interested, we work for you as an extended workbench or can help reduce overcapacity, then ask us. In January 2015, our machinery was another new and powerful 5-axis simultaneous milling extended Hermle C42. We have currently in another, new DMG CNC milling machine invested. - Table load up to 2,000 kg - Table size 1700 x 750 mm - Travel X = 1450 mm, Y = 700 mm, Z = 550 mm This machine is our production in addition to available from the KW22 / 15th A robot welding system was installed. This brings us to weld able TIG and MAG. We are very well set up for you to produce tools and jigs. We are happy to customize items, zero series, production parts or assemble complete modules. With two new wire EDM machines we can in 2-shift operation for you. Our machinery has been almost entirely reinvested. For quality assurance, is from March 2016 new Zeiss measuring machine available! For programming we use two CAD CAM - Siemens NX Unigraphics, Version: 8.5 programming stations and enables us to offer services to the 3-D machining. Another added advantage of unsrem companies: All contacts at Inter Technic spoke German except Slovak, English.
    > Read more
    Employees
    50 - 100
    Year of foundation
    2010
    Certifications
    ISO 9001:2015
Limit search by:
Region
Technologies
Materials
Company data
Industries
Certifications