2778 Suppliers found
List
Raster
Map
Sorted by 
Go to watch list 0

    Watch

    Esterer Gießerei GmbH Gießerei Wurz...

    SEAMLESS ALL-ROUND SOLUTIONS As a specialist foundry we concentrate on your ideas and requirements, and on implementing them in castings of up to 4 tonnes made from various materials. Simultaneous engineering, prototypes, and small and medium-sized production runs are our strengths, giving you the benefit of unusually short delivery periods, security of processes and reliability. Our core competencies are in the following fields: Machinery and plant manufacture Construction plant spare parts
    > Read more
    Employees
    100 - 200
    Year of foundation
    1862
    Certifications
    ISO 9001:2008

    Watch

    POPP

    POPP ist eine bulgarische Produktion und Handelsgesellschaft, die 2001 gegründet wurde. Unsere Lokation ist in Kostinbrod - 10km von Hauptstadt Sofia. POPP hat reiche Erfahrungen in der Kunststoffverarbeitung gesammelt. Mit Spritzguss, Extrusion und Montage exportiert POPP Produkte für die Elektro-, Haushalt-, Medizin-, Telekommunikation- und Kosmetikindustrie in EU. Wir bieten Ihnen von der Planung über Produktion bis zu Montagearbeiten alles zu günstigen Preisen an. Wenn sie ein Werkzeug haben und den richtigen Partner in Sachen Kunststoff Spritzguss und Extrusion suchen, dann sind wir richtig. Geht es um Teile die sie Herstellen wollen, beraten wir sie gerne. Wir bieten freie Kapazitäten im Bereich des Spritzgießens auf Maschinen von 2 bis 400 g. Wir verarbeiten: ABS, PP (auch mit GF/GK verstärkt), PVC, TPE, PC, PA, POM, PS, PET, und andere. Wir tun noch: - heißer Stempel - Tampon drück - Montage - Etikettierung - Werkzeug- und Vorrichtungsherstellung - Organisation der Expedition Wir haben noch freie Kapazitäten. Fragen sie nach, wir stehen gerne zur Verfügung!
    > Read more
    Employees
    50 - 100
    Year of foundation
    2001
    Certifications
    ISO 9001:2015

    Watch

    Gebr. Bräm AG

    Core competences «We cannot be the best in every aspect. Therefore, we have positioned ourselves at the top where our core competences lie.» Electrical Discharge Machining (EDM): In 1969, we bought our first electrical discharge machine, which has been the foundation for our most important core capability. EDM very soon proved to be one of the promising new key technologies in metalworking. We have continually expanded our experience in die sinking and wire EDM and, these days, count ourselves amongst the leading contract manufacturers for precise metal machining. It is not the ten machines that we productively utilise every day that are getting us further, but the very high standards of our customers for surface quality and precision forming. The advantages of EDM are: no mechanical stress to the metal piece, no limitations through hard metal grade or shape, high degree of machine autonomy, greater design possibilities at engineering level. Only an EDM-compatible design will profit from all EDM benefits – a piece of advice our customers will gladly follow. Tungsten carbide working: «It is the combination of knowledge of materials and knowledge of methods that form a basis for the skilled working of hard metal.» We have managed to form a solid base to work tungsten carbide parts efficiently by liaising intensively with the outstanding tungsten carbide manufacturer Metzger Ltd, Lotzwil/Switzerland, and by meeting the very high standards of our customers. We support our customers when it comes to choosing the right hard metal and the most suitable methods such as grinding and abrasion, polishing and extrude-honing and also provide the handling during and after the production process. Only perfectly manufactured hard metal parts will convince the customer to pay a higher unit price. Laser Machining: As with EDM, we decided early (1986) to go with this new key technology. We have been using the Nd:YAG pulsed laser (LASAG) for laser welding, cutting, drilling, marking and laser cladding. The high power pulse and high beam quality melt or vaporise nearly all known materials. Lasering is used to produce microstructures and to connect highly challenging geometrical shapes by conduction welding. The same rules apply as for EDM: only a laser-compatible design will be able to take advantage of all the benefits laser technology has to offer.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1965
    Certifications
    ISO 9001:2008

    Watch

    Hohenloher Präzisionsteile GmbH

    In 1982, Peter Sedlak, the CNC machining technology with an employee and three machines in Schwäbisch Hall. Were produced turned parts in small and medium-sized batches. Over the next few years, additional machines were added. The number of employees rose steadily. An increased demand for pre-finished parts made the first purchase of a conventional milling machine and a CNC machining center later inevitable. So it was always close in the rented hall and the desire to own a larger hall and getting stronger. In December 1991, finally, the company moved to Untermünkheim-Enslingen so that in January 1992, production could be included in the new hall. The economic downturn slowed in subsequent years, the growth of the company. But it soon went up again. Until 2000, all machines were replaced with new, more modern. In 2000, the certification according to DIN EN ISO 9002 was carried out. As of January 2002, the company operates under a new name. Peter Sedlak and his longtime collaborator and master Friedrich Schiele founded the Hohenlohe precision parts GmbH. Today, 12 employees produce pre-finished parts and assemblies for many satisfied customers from different industries. Various grinding work, as well as heat and surface treatments we have them implemented by competent and reliable partners. The reward for good quality and very little complaints are our satisfied customers.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1982
    Certifications
    ISO 9001:2015
    TP Suche Banner

    Watch

    Andreas Berg Stahl- und Maschinenba...

    Versatility - through years of experience and openness to new ideas. Today MOUNTAIN METAL OHG was founded in 1980 by Mr. Alfons Berg as a sole proprietorship. In 1994 the opening of a branch factory in Oberwiehl and thus the expansion of the power spectrum in sheet metal processing. The establishment of a partnership made in 1999 by the introduction of the individual enterprise and the participation of Mr Andreas Berg, who since 1993 has been an employee of the company. Managing Partners are Alfonso and Andreas Berg. Dedicated and technically skilled staff, supported by a powerful technical equipment enable quality and on-time reliable results that meet the individual requirements of our customers. With the sum of our experience of over 30 years, creativity and flexibility, we develop optimized overall and advanced detail solutions. Robot Welding Welding Welding Robot welding welded constructions sheet metal forming sheet metal processing milling turning machining sheet metal structures large milling parts assemblies burnouts combustion engine burning operation Abkantarbeiten cut profiles industry profiles structural steel welding welding TIG MIG MAG Stud Welding Drawn Arc Capacitor discharge machining stainless steel engineering tool steel plasma cutting plasma system plasma cutting parts sheet steel processing 16Mo3 Hardox 1.4301 1.4571 1.4404
    > Read more
    Employees
    Year of foundation
    1980
    Certifications
    DIN 18800-7:20

    Watch

    Wagner Sondermaschinenbau

    Special machine for Wagner: Everything does not exist! We live innovation and look forward each time on new challenges! Whether targeted conversion of trucks, whether trailers, industrial plant or special solutions for your needs - Wagner Special machine puts your desires to professionally! Mechanics, hydraulics, electronics - we have the professionals at work We analyze the present problems and develop inter-plant solutions! In Wagner the planning and implementation of electronic, hydraulic and mechanical components are. So that we can surprise you with our solutions. Over and over again. Produced entirely in Germany We guarantee our machines! For that reason, we never use on purchases from abroad. We build your products completely in our own workshop. Whether special size or special solution - where it says Wagner Wagner is also in there. And only Wagner!
    > Read more
    Employees
    Year of foundation
    Certifications

    Watch

    SITEK AG

    The SITEK AG is a dynamic and reliable companies in the industry. It produces high-quality plastic parts and associated tools for a demanding clientele. We want to contribute to the long term success of our clients and work in partnership and permanently with you. Our mature parent-form concept enables you to relate complex plastic parts for small and medium series at affordable conditions, yet in Swiss quality. Together with you, the customer, and also with our suppliers as partners we are able to offer far more than just a plastic part in the situation. We see ourselves as a provider of total solutions from concept to the finished packaged assembly. Bützer assumes responsibility for protecting the environment and the health and safety of our employees by appropriate action. We ensure the development and independence of our family business fair profits which are reinvested at a substantial part of the company's progress. Part Sprektrum: - Housing, Housing - Cover, cover - Transmission cover - Pump housing - Display window - Cover, aperture - Gears, gear - Box, container - Hinge Range of machines: - Krauss Maffei - Arburg - Ergotech - Negri Bossi - Fehlmann - Agie - Charmilles Technologies: - Injection molding, injection molding, plastic injection molding - Ultrasonic Welding, Ultrasonic - Hand assembly, installation, assembly, screwing, plugging, clips, Klippsen - Insertion, insertion form - Bonding, potting, bonding - Coating, painting, electroplating - Mold design, mold - Die-sinking EDM, sinker EDM, wire cutting, wire EDM, Wire EDM Range of materials: - PEEK, Victrex - PA, Ultramid - PE - PP - PBT, Ultradur - POM, Delrin, Hostaform - PET - PSU - PPS, Fortron, Ryton - PPO - ABS, Cycolac - PC - PMMA - LCP, Vectra - PEI, Ultem - P
    > Read more
    Employees
    50 - 100
    Year of foundation
    1997
    Certifications
    ISO 9001:2015

    Watch

    Heggli & Gubler AG Metalldrückerei ...

    Heggli & Gubler Metalldrückerei AG - Your partner in the high-tech sheet metal forming ... Our strength lies in the forming of sheet metal by metal spinning. Through the expertise of our experienced staff, we are able to offer you to produce prototypes, single or special designs. On our pressing machines we produce smaller or larger series kostengünstigst in the best possible quality.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1945
    Certifications
    ISO 9001:2008

    Watch

    Anlauff GmbH

    CNC precision turned parts of the precision experts! For over 40 years, designs and manufactures the Anlauff GmbH Precision turned parts and assemblies in a variety of materials such as steel, stainless steel, aluminum, brass, bronze and even plastic. A detailed list of materials is listed below. Our many years of experience as a top supplier of reputable companies that specific industry knowledge, eg in the automotive, hydraulic engineering, electrical engineering and hardware technology for maximum quality and maximum efficiency. We produce at the site Zimmern ob Rottweil (Baden-Württemberg) CNC machining parts according to your drawings and support you in the realization of individual rotating parts and assemblies. As sample parts in small batches from 1000 pieces and high-volume to 100,000 piece we produce fast, flexible and on time. Furthermore, we also offer an extensive parts service as Heat treatments ***: *** - Case hardening, annealing, induction hardening - Tenifer, tempering, hardening and tempering Surface finishes ***: *** - Zinc (Blue, Yellow, Olive, Black), thick-film passivation (Cr-VI-free) - Zinc / nickel, zinc / iron andvm - Tin plating, nickel plating, copper plating, hard chrome plating - Anodizing, phosphating, bronzing Finishes ***: *** - Milling, deep hole drilling, thread rolling, broaching, honing, bending, marking - Vibratory finishing, polishing, deburring, washing, inner and outer loops Processed materials: - 11SMnPb30 1.0718, 1.0715 11SMn30, - C15PB 1.0403, 1.0401 C15 - 100Cr6 1.3505 - 16MnCrS5 1.7139 - 42CrMoS4 1.7227 - ETG88, ESP65 - POM - MS58 CuZn39Pb3 2.0401 - CuSn12 2.1052 - Gunmetal CuSn7ZnPb 2.1090 - AlCuBiPb, AlCu6BiPb 2011 3.1655 - AlCuMgPb, AlCu4PbMgMn 2007 3.1645 - AlMgSiPb 6012 3.0615 - AlZn5Mg3Cu AlZnMgCu0, 5 7022 3.4345 - AlMgSiMnBiPb 6026 - AlMg4, 5Mn0, 7 3.3547 5083 - AlUn5, 5MgCu AlZnMgCu1, 5 7075 3.4365 - AIMgSi AlMgSi0, 5 6060 3.3206 - AlSi1MgMn AlMgSi1 3.2315 - Stainless steel 1.4305, 1.4301, 1.4021,
    > Read more
    Employees
    10 - 20
    Year of foundation
    1969
    Certifications
    ISO 9001:2015

    Watch

    Biltec AG

    The young company Biltec AG is a reliable and competent manufacturer of precision mechanical precision parts. BILTEC AG has a modern and technically advanced machinery for the machining of metals and plastics. Thanks to precision, innovation and reliability Biltec has made a reputation in various categories, but also in the optics industry not only in general engineering. Biltec AG is focused on the production of: • Standard parts • one-offs • Prototypes • Modules Biltec AG also provides support during the design phase for mechanical machined parts. We also perform construction work on behalf of customers through independent, if desired by our customers.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2002
    Certifications

    Watch

    WTW Werkzeugbau GmbH

    Turned parts machined parts Precision turned parts precision machined parts Complete productions of devices and press tools, injection molds and blow molds Test equipment for your quality-oriented production Special designs according to your drawings or data, such as collets, vise jaws Since 29.05.2008 we have in our company over a five-Achsfräszentrum (DMU 70) hereby we may Ih- tions provide even faster and more accurate parts in the single-Small and medium batch production. A consultation is included TRY U.S. We process materials such as copper, brass, aluminum, Stainless Steel, stainless steels Application and curing tooling steels and steels We let in foreign firms programming for 5-axis machining perform Vacuum hardening, case hardening, nitriding can be carried out in foreign companies.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1992
    Certifications

    Watch

    Magdalene Meyer GmbH

    Our company was founded on 02.05.1960 as a toolmaking company. In 1978, the production of stamped parts was recorded. We work up to 70% for the automotive industry. Our tools are manufactured in our own tool itself. There are punching machines of 25 tons. up to 250 t. available. We use aluminum and stainless steel band, both bare and galvanized, up to a width of 500 mm and thickness of 4 mm. We are manufacturer of stamped and formed cold formable from all materials up to a thickness of 5mm. The tools, fixtures and special machines required for production can be manufactured in our modern tooling itself. It composite tools have already been made up to a size of 1600 x 900 mm. In addition, is also imported wage work in the field of wire erosion. The preparation of 4-axis wire EDM programs is possible in our home. For the production of stamped and formed parts are available to us in addition to various stamping presses Eccentric presses from 25 to 250 to pressure force. It will all be cold-processed materials up to a width of 500 mm and a thickness of 3.5 mm. The introduction of pierce nuts in the progressive die is possible. Feeding for punching pin punch and nuts is available. The necessary tools can be produced in our own tool.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1960
    Certifications
    ISO 9001:2015

    Watch

    Breuckmann GmbH & Co. KG

    Hans Breuckmann founded our company in July 1966. In his one-man operation, he manufactured permanent mould casting parts from brass and silicon tombac in self-built furnaces. He gathered extensive practical experience while working as operations manager in a leading medium-sized enterprise. We are now in our second generation under the leadership of Volker Breuckmann and work with 80 employees to achieve joint success. The traditional permanent mould casting process has been supplemented by pressure die casting technology for heavy metals. Our range is completed by in-house mould construction and toolmaking, CNC machining technology and HSC milling technology. We are able to cover a complete work cycle with all required production steps, from designing a cast to mechanical processing. This provides us with direct access to all departments, which guarantees high quality and flexibility. The die is already cast for the future of our traditional company. Following his apprenticeship, Michael Breuckmann will join the company and follow in the footsteps of his grandfather and father, thus bringing the company into its third generation.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1966
    Certifications
    ISO 9001:2008

    Watch

    innojoin GmbH

    Welcome to the innojoin GmbH & Co. KG. We are your partner on issues of laser technology and project management. Tell us about your task - we work for them the best solution for your project. Use our website for a first overview of our services.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2005
    Certifications
    ISO 9001:2008

    Watch

    CO.ME.P Srl

    CO.ME.P is a company specialized in the production of metal construction in structural steels and high strength, medium / large size for a wide range of thickness (1 ÷ 200 mm). According to the customer's drawings and specifications, Co.me.p delivers what is necessary to the realization of metal constructions, complete with machining (milling / boring, even for third parties), thermal cutting, welding, issuing certificates of origin of the materials used and of welding consumables, surface treatment (sandblasting, painting, galvanizing), certified heat treatment, certified non-destructive testing RT, UT, MT, PT, VT, leak test, hydraulic test, load test, dimensional tes and, inspections. The guiding principle of the company is the supply of high quality and precision metal construction and precision machining, through careful controls in the used raw materials together with the careful and accurate monitoring of the teps. The constant modernization of production processes and company qualifying, supported by major investments in terms of machine tools and equipement of last generation, ensures high performance and the achievement of excellent technology levels. Manufacturing processes and applications are constantly being tested, in accordance with EN 1090-1 and EN ISO 3834-2.
    > Read more
    Employees
    20 - 50
    Year of foundation
    Certifications
    DIN EN 1090
    TP Suche Banner

    Watch

    Hauer-Schmidt GmbH

    1872 from an idea a reality. With the production of locks, Africa godfather and machetes, the company founder Heinrich Schmidt took the plunge into self-employment. The company produced for the domestic needs and for export to the whole world. The delivery was carried out under its own and also under the trademark of exporters. 1925, the mainstay of Agricultural Engineering was established. In particular, agricultural wear parts have been made for tillage. These were among other things, grubbing shares, cutting blades, angle coulters, ridging etc. of the leading manufacturers of agricultural machinery. In the whole of Germany and western Europe were and are these products their application. Since the 60s, the range has been expanded by the introduction of the Sheet Metal and processing and the production of animal traps of all kinds. The pressing, stamping, punching and bending parts are produced mainly according to customers drawings and samples and finished or coated as desired. Our forward-looking machinery is constantly being improved by new machines. The guarantees with experienced and trained personnel for highest precision and quality in the entire manufacturing spectrum. Through our research and development department, the products of a design verification are subjected. Here, the product or the working process is developed as needed. In August 2008, we have our machinery increased by 2 other press lines. Press forces up to 400 tons. and a material width up to 500 mm are no problem now. This also sets with up to 100,000 pcs delivery lot can now be made efficiently.
    > Read more
    Employees
    Year of foundation
    1872
    Certifications
    ISO 9001:2015

    Watch

    MTS Srl

    MTS srl, boasts a history of more than 40 years of activity in the mechanical sector. The company occupies a covered area of ​​10500 square meters in which it employs a staff of 70 employees who deal with a wide range of all processing phases, starting from the purchase of raw material, processing, until the delivery of the finished product, including possible superficial treatment .. In MTS we work in such a way as to perform mechanical machining in series, as well as turning, milling and large carpentry details, up to 10000 mm in length, all within a single plant, which is also expected to expand until 12000 square meters of surface area, to offer the customer an always better and more efficient service, satisfying at best the demands of the market. The particular welding processes, up to 12000 mm in length, are carried out by robotic systems, while the less invasive processes are performed by qualified personnel certified by the TUV with DIN 38-34 and DIN 18800 certification. To offer a complete service to our customers, the company is able to manage heat treatments such as: reclamation, standardization, annealing, hardening, cementation, nitriding and surface treatments such as hot and electrolytic galvanizing, burnishing, nickel plating and chrome plating. Thanks to the great versatility of the company, it is possible to adapt each treatment to the customer's product specifications
    > Read more
    Employees
    50 - 100
    Year of foundation
    1982
    Certifications
    ISO 9001:2008

    Watch

    Matthias Wetzel Industriebeschriftu...

    Surfaces with system The Matthias Wetzel Industriebeschriftungen GmbH stands for the treatment, processing and labeling of surfaces. She has mastered technologies such as laser marking, engraving and mechanical parts, screen and pad printing, powder coating and painting as well as precision finishing, drag finishing and processing. Both the printing of round surfaces especially of optical components and surfaces of tools, trim panels, front panels, labels, watches trays, implants, scales, mechanical parts and complete assemblies can be coated and grafted. We are certified according to DIN EN ISO 9001, DIN EN ISO 14001 and OHSAS 18001 for laser-etched labels we are CSA approved supplier for the North American market.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1999
    Certifications
    ISO 9001:2008

    Watch

    turningtec GmbH

    WEBOTECH is a manufacturer of precision turned parts with nearly 100 years of experience in the market. As one of the first manufacturers of turned parts worldwide we are certified according to ISO TS 16949. Our expertise in machining, so the quality of our employees and our machinery, you can safely assume. For our references and the development of speaking, particularly in recent years. In the procurement of turned parts reliability is one of the most important criteria. It meets us again and again with pride when we classify renowned companies from all over Europe as preferential or A-supplier. We at Webotech have the know-how for even the trickiest cutting task. We have the experts in the essential processing techniques. We are constantly with our machinery to the prior art. We work with future-oriented forms of organization. Why Choose Us: - Pooling of expertise, manpower and equipment from various fields - Continue to bring design departments and value analysis teams with new ideas - Complete production program from the standard part according to your documents by developed together with you special section for extreme operating conditions - Complete in-house production of components - High investment in premises, machinery, automation, internal training and development - Modern management structures Billions of turned parts from our company have found their way into almost every industry. This speaks to our experience. This speaks for the quality of our products.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1923
    Certifications
    IATF 16949:2016

    Watch

    Fischer Reinach AG

    What began more than 160 years ago with the mechanical production of hooks, sticking, needles and feathers, today is one of the most modern and efficient metal processing companies: We stamping, bending, cutting, welding, pressing, shapes, and combine steel and non-ferrous metals for countless applications.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1842
    Certifications
    ISO 9001:2015

    Watch

    HERA Herm. Rahmer GmbH & Co. KG

    HERA -solutions in metal
    > Read more
    Employees
    50 - 100
    Year of foundation
    1890
    Certifications
    ISO 9001:2015

    Watch

    Willi Haller GmbH

    Welcome to Haller GmbH, tool making and plastics processing. For over 50 years we provide technically advanced injection tools and plastic parts for various branches of industry. We are an independent and independent family with currently 70 employees. It is very important for us the personal, customer-oriented consulting. The basis for dialogue with our (your) customers is our employee team with extensive experience and expertise in the individual technical areas of the company - development / Kons- truktion, tooling, plastics processing (less than 1 gram to 800 grams of excess weight), printing and assembly. We also offer logistics solutions as kanban, JUST IN TIME or consignment stores at. Moreover, we also accept contract injection jobs Working together with you, we want your concepts partnership schedule and innovatively implement.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1954
    Certifications
    ISO 9001:2008

    Watch

    Mark`skill Enterprise Co., Ltd.

    Mark'skill Enterprise Co., Ltd. Founded in 2008, Mark`skill is a high precision forging and CNC technology company. We supply among other things considerable European customers (original equipment manufacturers) in the motorcycle and bicycle industry. We produce parts for pneumatics, dosing and lubrication technology. We produce and deliver the articles completely machined, including surfaces, such as anodized and painted. We process the following materials: Drop forging / machining - Aluminium - brass Turning and CNC technology - steel / stainless steel - Light metals such as aluminium / brass We stand for customer satisfaction, excellent delivery service, quality and transparent costs. We are certified accordingly and have all the necessary facilities for quality assurance at our disposal. of your products. We are looking forward to your inquiries. your sincerely Mark Huang Managing Director
    > Read more
    Employees
    20 - 50
    Year of foundation
    2008
    Certifications
    ISO 9001:2015

    Watch

    Melchers Techimport GmbH

    C. Melchers & Co. was established on January 1, 1806 in Bremen, where the global company still maintains its headquarters to this very day. In the first few decades of the company’s history, over 30 ships sailed the oceans of the world under the Melchers flag, linking the ports of Europe, America and the Pacific. In the 1860s, C. Melchers & Co set up operations in Asia, where all its trading interests swiftly moved. At the same time, with the onset of steam ships, it abandoned its own shipping business to devote itself entirely to extending its trading operations. 1866 saw the establishment of the first branch in Hong Kong, in the wake of which China began to develop into a key lynchpin for the company’s business. The ensuing decades were a period of rapid growth for Melchers in China, with over 2,000 people employed at 12 branches and plants throughout the country. The First World War proved to be a setback for business relations, although business quickly recovered. It was not until the end of the Second World War in 1945 that business came to an almost complete halt. Even so, the company continued to survive, re-opening its first branches in Hong Kong, Singapore and Kuala Lumpur in the early fifties and gradually extending its branch network across Asia. Following the opening of the Chinese markets at the end of the seventies, Melchers set up branches here again, underscoring the significance of Chinese business for the company. With the establishment of a branch in San Francisco in the early eighties, the company also started to engage in US-Asian trade so as to gain a share of the rapidly growing trading relations between these two regions. Trade with China remains a key focus of the company’s overall business, comprising as it does imports of special natural products and finished goods on the one hand and exports of plant, machinery and supplies for the Asian industry on the other. Yet, business with South East Asia has since also come to the fore, with the company amassing broad-based expertise in marketing and selling consumer goods in particular. There are special departments for each article group in Bremen as well as at the foreign branches. They work largely independently within the overall company and are staffed by highly qualified experts. Over 1,000 employees in Germany and abroad assist customers and suppliers with their specialist knowledge. Rather than being based at the company’s headquarters, most of these employees are now stationed at subsidiaries, something which in turn reflects the company’s further development and the strategic alliances which it has forged.
    > Read more
    Employees
    > 1000
    Year of foundation
    1806
    Certifications
    DIN 18800-7:20

    Watch

    JM Metall GmbH Draht- und Bandbiege...

    We are a medium Drahtumformtechnik from NRW. We produce: wire bending parts according to drawings / samples to 16.0 mm made of all materials such as iron wire (C9D), bright bright drawn or light bright zinc plated, spring steel wires up to 13.0 mm (DIN EN 10270-1; variety SM, SH), stainless steel wires (1.4301, 1.4305, 1.4310, 1.4571 etc.) In addition, we also manufacture: technical springs, leaf springs, stamping and machining parts. Our machinery consists of CNC-controlled bending machines as well as pneumatic wire bending tables, where we finished conventionally. Abegerundet this is eccentric presses of various sizes as well as custom Special constructions that have been made in our own workshop. We also offer all surface treatments such as electro galvanizing, chrome plating, nickel plating, e-polishing, polishing ball, etc. Products: Ironing, levers, brackets, caliper bracket, hook, infusion hook and bars, spring tines, rust needles, tension springs, compression springs, Wire bending parts according to drawings and samples, leaf springs, CNC wire bending parts, wire parts with working such as chamfering or cutting threads,
    > Read more
    Employees
    Year of foundation
    1994
    Certifications

    Watch

    KeyTec Netherlands B.V.

    KeyTec is an ambitious, global supplier of metal, plastic and combined metal/plastic high-precision components and assemblies. Originally formed in 1980, the company was divested from Philips Electronics N.V. in 1999. Flexibility, speed and customer focus are key assets that we use on our journey to becoming the preferred supplier of electro-mechanical components. This is our promise to our customers. We provide High Precision Metal and Plastic Components & Mechatronic Manufacturing Solutions (MMS) in selected application areas. Within these application areas we are a successful developer and producer of modules and products for companies with a focus on technology innovation. Our USP's are automotive quality, paired with flexibility, in house engineering and provider of quick affordable tooling. Our Production Technologies are: * cutting * Deepdrawing * Injection moulding * Insert Moulding * Reel to reel injection moulding * Assembly (electrical and mechanical) * Surface treatment * Laserwelding * Soldering * Ultrasonic welding * clean to line deliveries for cleanroom operations We focus on automotive and medical markets and further produce for customers in Precision engineering, Mechatronics, Optical industry Vacuum technology and glass to metal sealing Advanced Materials We have a broad experience in the use and application of less standard materials and exotic alloys. We perform deep drawing, stamping, laser welding and turning on metals and alloys like: Kovar or Fernico, Titanium,Oxygen free Copper, pure Nickel, Molybdenum, and Nitinol
    > Read more
    Employees
    50 - 100
    Year of foundation
    Certifications
    ISO-TS 16949:2

    Watch

    KURE d.o.o.

    We are a renowned Slovenian engineering company in the field of mechanical engineering. We deal with manufacturing and assembling machine components services and we also provide mechanical design services, all in the field of structural steel, stainless steel, aluminium and plastics. We are present in various sectors of the industry across Europe. As a family owned company we have been a professional partner for already 20 years between Slovenian manufacturing companies and European customers (Austria, Germany, Switzerland and Denmark), for whom we manufacture custom-made products in Slovenia. With our qualified experts we ensure correct technical production, planning, quality and timely order execution. Our advantage is that you as our customer have only one business partner who covers the entire Slovenian market for products ranging from 0.1 kg up to 50 tons. We also guarantee a timely delivery of your orders and the quality which are essential for long-term partnerships. As a modern company our goal is to meet the needs and wishes of our customers to the best of our abilities. TECHNICAL POSSIBILITIES Material: Metal, INOX, aluminium, brass, casting, plastic, etc. Cutting: Mechanical cutting, flame cutting, plasma cutting, laser cutting Welding: Steel, INOX, aluminium Maximum weight: 50 t Turning: CNC machines up to: Ø = 1000, L = 6000 mm CNC carousels up to: Ø = 6800 mm Milling CNC horizontal milling machines up to: x = 10000 mm, y = 4000 mm CNC vertical milling machines up to: x = 2000 mm, y = 1000 mm CNC portal milling machines up to: x = 15000 mm, y = 5500 mm, z = 4000 mm Eroding (EDM) Wire and spark erosion Grinding Plane grinding machines up to: x = 3000 mm‚ y = 1500 mm Round grinding machines (inside or outside) up to: Ø = 400 mm, L = 4000 mm Surface treatment Sandblasting, painting, galvanising, nickel plating, anodising, black oxidising, nitriding, hardening, etc. Quality control Quality measuring with special tools and 3D measuring machines Assembly of machined components From component machining to component assembly with 3D measurement protocols. Transport We can arrange the transport of ordered items from Slovenia to your company.
    > Read more
    Employees
    5 - 10
    Year of foundation
    1991
    Certifications
    DIN 18800-7:20

    Watch

    NATEC Verbindungselemente GmbH

    Natec is your partner, from development to series! Both large corporations, as well as growth-oriented Mittelstaender. Whether the market leader in the industrial or service, or those who want to be. Our clients come from all sectors of the economy. In order to meet the current needs and demands of the market, we can provide tailored solutions for your business. We take care of the complete supply chain: planning, procurement, quality testing, warehousing and transportation. For years with much success, as our ever-growing customer base proves. As a service provider with its own production and development, we have the know-how and have the right partner for cost-effective procurement and flawless logistics. The basis for the positive development of recent years is the interaction of these flexible partner and our motivated employees, the resulting rapid Arbeitsablaeufe, a competitive pricing strategy, and of course the central storage at Natec. Our production partner here in Turkey are medium-sized family, far from the expensive and congested mass manufacturers. We know our partners for years and appreciate their design and manufacturing expertise. Through a comprehensive supplier management system is at all times the best supplier opted and appointed for your product. These are continuously tested for quality, delivery and price down. We and all of our manufacturing partners are ISO/TS16949 9001:2008 or DIN ISO: 2009 certified. You always have the possibility here to visit the production facilities in Turkey and to form a personal impression of the technical equipment, processes and working conditions in the respective producing for companies. Your benefits at a glance: - Reducing your supplier through Central Shopping on Natec - This reduction in the planning and control effort in your purchasing department - Cost optimization through market-based purchasing and delivery by bundling - Providing the highest quality in accordance with DIN ISO 9001:2008 / ISO / TS 16949:2009 - 100% delivery performance through warehousing - Short delivery times The satisfaction of our customers is our top priority, so us a trusted and personal contact is so important. Contact us for your strategic partner in Turkey!
    > Read more
    Employees
    Year of foundation
    2012
    Certifications
    ISO 9001:2008

    Watch

    AnVa Components

    AnVa Components supply high-tech steel products for the automotive and other engineering industries to a global market. Our technical expertise and andvanced machinery contribute to the streamlining of your company’s manufacturing, in fields ranging from standardization and design to machining, heat treatment, surface treatment and finishing. We have access to a unique cold forming technology that can enhance the strength of the material and minimizes waste of raw material in the subsequent machining processes. Our highly automated plant ensures effective material handling and a streamlined production flow. We have a lean oriented organization focused on customer value and over 30 years of experience from satisfying the requirements of the automotive industry.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1982
    Certifications
    IATF 16949:2016

    Watch

    Karcoma-Armaturen GmbH

    Welcome to the Web Site of Karcoma-Armaturen Decompression valve, pipe filter, drain cock: Just three examples of a few of our innovative products around the engine construction. We design, develop and manufacture fittings. This includes fuel fittings and filter elements such as pipe filters, straight-way filters or fuel filters (gasoline filters) as well as fuel cocks and drain cocks. Karcoma-Armaturen GmbH also specializes in the decompression valve, one-way restrictor and other valves such as the aeration and vent valve. Need a customized solution? We are ready to work together with you to develop a customized design for your special fuel fittings needs. From design to assembly, you are kept well informed.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1922
    Certifications
    IATF 16949:2016
    TP Suche Banner
Limit search by:
Region
Technologies
Materials
Company data
Industries
Certifications