Company description
* Straight, helical, double-helical external-toothed gears, finished using MAAG machinery, max. outside diameter 3000 mm, max width 450 mm.
* Straight or helical external-toothed gears, with trimmed profile, max. outside diameter 2000 mm, max width 200 mm.
* Straight or helical external-toothed gears, with ground profile, max. outside diameter 1600 mm, max width 700 mm.
* Internal gears, max. inside diameter 2500 mm, max. width 200 mm · Worm screw gearing with max. diameter 1400 mm
* Gears for all types of chains and timing belts, max. diam. 2000 mm · Gleason straight, spiral and Zerol gears
* Trapezoidal screws with max. length 3000 mm or above
* Standard and special worm screws
* All types of splined shafts, max. trimmed length 3000 mm, ground up to a length of 2000 mm in the splined part
* All types of toothed joints up to 1200 mm diameter
* Special reduction gears
* Milled racks, max. length 4000 mm, max width 250 mm, max mod. 20
* Ground racks, length 2000 mm, width 250 mm, max. mod. 12
* High precision ground frontal joints
* Toothing from mod. 0.2 to 30 and above, with non-standard pressure angle and proportions.
* Calculations and checking of toothing technical data
* Spare parts for machine tools, presses, marine engines
* Toothed conical punches
* Toothed sectors
* Slots and keyways, max. width 430 mm on max. 7000 mm high parts
* Helical milling on drums and cylinders
* Flat cam milling
* Frontal and involute toothing
* Toothing with swell and profile correction