3585 Suppliers found
List
Raster
Map
Sorted by 

    Watch

    Beutter Präzisions-Komponenten GmbH...

    Your expert for complicated components and very critical applicationsBeutter is a supplier of fine mechanical components with a high production depth in small batch series. • Beutter was founded in 1909, and is located in Baden-Württemberg, very close to the A81 motorway, 60km south of Stuttgart. • We have about 125 employees. Of our production staff, over 90 % are skilled workers. • We have the capability to perform, in-house, all machining processes (turning, milling, grinding, honing), while for special processes and surface and heat treatment processes we use competent third-party suppliers. • For us, the ideal is small- to medium-sized production runs with a lot size of between 20 and 1,000 pieces. • Beutter is particularly capable within the manufacturing of components with close production tolerances. • We process all machinable materials, and are particularly experienced in processing high-alloyed steels (stainless steel, V2A, V4A, 1.4441, 17-4PH), titanium and special materials (inconel, hasteloy, Ni-base alloy, chromium molybdenum steel, tantalum, platinum-iridium, PEEK). • Our main fields of activity are: Medical technology, aeronautics, hydraulics, military engineering, mechanical engineering and measuring equipment technology. • Our quality management system is certified according to DIN EN ISO 9001:2008, DIN EN 13485 (medical products) and DIN EN ISO 9100 (aeronautics). • We can process your data via our CAD system “SolidWorks“.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1909
    Certifications
    ISO 9001:2015

    Watch

    Anant GmbH

    The Anant GmbH is a marketing subsidiary for own products & representation for few well-selected Indian manufacturing units. We have a good knowledge + experience for quality systems & supervised manufacturing outsourcing from India. Our German representation offers a potential to take up a responsibility to supply the article as door delivered & being your contact/contract partner. whereas our Indian technical team offers possibly of economical in-house manufacturing as well as local outsourcing under our supervision & our own quality control. At Patel Technomation - India, We have the experience and capability of sub-contract CNC machining including supply/procuring of foundry and forging products in small batches as well in large quantity. We follow the TÜV SÜD ISO 9001-2000 quality system and are dedicated to providing excellent customer service, and the timely delivery of quality products. Our Manufacturing unit is located at major Auto-parts manufacturing, Casting, Forging & engineering hub in India; which offers us a good development possibility for any specific/special part manufacturing possibility in a most economical manner.
    > Read more
    Employees
    200 - 500
    Year of foundation
    2006
    Certifications
    ISO 9001:2015

    Watch

    Gröbmer GmbH

    The ... Vielfätigkeit of mechanical engineering. For 35 years, our company has been working in the engineering industry. Always the goal in mind, independent and flexible manufacture our workpieces and to expand our product range, we manufacture to the highest quality standards and precision. With a modern and versatile machinery, we offer our customers experience and commitment in the development and production of their mission. Our handicraft business with about 20 employees specializing in the manufacture of parts, components and assemblies; manufacture both single and serial production are possible. We process a wide variety of metals and plastics - from 3D - CAD - design to the finished product. We design and manufacture - take your product ready for installation in reception, thus saving costs and time. As an experienced Hertseller of turned and milled parts in machinery and mold with a variety of materials, we guarantee quality, precision and flexibility. With CNC machines from renowned manufacturers in the field of machining, we produce from prototype to series production of technically demanding parts with consistent quality in 2D and 3D. Our modern CNC lathes are equipped with automatic bar feeder, driven tools, Y-axis and sub-spindle, so they allow the individual and series production of complex parts in a single pass. New in our machine park is a 5 - axis "Millturn" machining center with which we completely finished workpieces in one set-up, which leads to a significant reduction of the idle times and the precision significantly increases. With corresponding 5 - a pallet exchange system and a total of 90 tool places, we are well prepared for series production. - CNC Milling - 3-D mold - Vermessarbeiten and quality control
    > Read more
    Employees
    5 - 10
    Year of foundation
    1978
    Certifications

    Watch

    Ningbo Yinzhou Gain Machinery Co.,Ltd

    Our booth No. is 14A34-03 for the 14th International Foundry Trade Fair with Technical Forum to be held from June 25-29, 2019 in Duesseldorf, Germany. Welcome!! Unser Stand Nr. 14A34-03 für die 14. Internationale Gießereimesse mit Technischem Forum findet vom 25. bis 29. Juni 2019 in Düsseldorf statt. Herzlich willkommen!! Ningbo Yinzhou Gain Machinery Co., Ltd., is a manufacturing enterprise focusing on design, development & production of one-stop service. Mainly engaged in high-precision OEM parts production. Gain Machinery Specializes in the production of stainless steel 304, 316L, duplex stainless steel 2205, stainless iron, alloy copper, aluminum, alloy steel and other materials. The product diameter is 0.5mm-500mm, tolerance can reach 0.005mm, Surface texture can reach 0.02μ. We passed ISO9001 / TS16949 quality management system certification. The Products cover auto parts, medical treatment, aerospace, electronics and other fields, exported to Japan, Israel & other Asian countries and Germany, the United States, Canada & other European and American countries.
    > Read more
    Employees
    100 - 200
    Year of foundation
    2005
    Certifications
    IATF 16949:2016

    Watch

    Trico AG

    The TRICO AG - A small business, which is characterized by quality and flexibility. For Präzisionsdrehteile of all kinds, the TRICO AG is the right partner. We process various materials of up to Ø1.0mm Ø34.0mm.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1984
    Certifications
    ISO 9001:2015

    Watch

    Rimec Group srl

    WE INFORM YOU THAT RIMEC GROUP WILL BE CLOSED FOR SUMMER VACATION FROM 09 TILL 22 AUGUST INCLUDED. Rimec Group is a company that manufactures mechanical components for a variety of industrial sectors. We have been investing for years both in technological research processes and in the development of leading-edge solutions for the mechanical products machined in our workshops. We have specialised in the construction of shafts and worm gears for winches and reduction gearboxes, link and pivot pins for lifting systems, adjustable stretchers and anchor fittings for fleyer chains, track rollers and sprockets for construction equipment undercarriages, and Twist locks, which are safety components for the handling of containers. We hold UNI EN ISO 9001-2015 and UNI EN ISO 14001:2015. The Rimec Group corporate structure is able to handle all phases of the order, starting from purchase of the raw material through to delivery of the finished product, which can also be assembled in our contract assembly division to the customer’s specifications. All processing steps, from issue of the order to shipment of the finished product, are handled by a computerised bar-code system. Apart from its in-house machining and other processes, Rimec is able to draw on its know-how and a dense network of partner firms inside and outside the group to deliver special heat and surface treatments, such as Case hardening, Induction hardening, Ferritic nitrocarburising, Galvanisation Painting, Chemical nickel plating, Chromium plating and Phosphating
    > Read more
    Employees
    20 - 50
    Year of foundation
    2003
    Certifications
    ISO 9001:2015

    Watch

    Blankart AG - Werkzeugbau + Fertigung

    What we offer We are professionalized in job shop manufacturing and sourcing simple stampings to complex assemblies, as well as in the production of simple and complex punching tools. As we attach great importance to "Swiss made", all work processes in domestic be made, either directly from us or from selected partner companies.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1958
    Certifications
    ISO 9001:2015

    Watch

    KREA Makina AS & KREA Technology AS...

    KREA Laser cutting, Welding and sheet metal fabrication. We offer a variety of services and materials in order to precisely fabricate, assemble and package metal products and parts to your specifications Our core business is welding (MAG,TIG), laser cutting and sheet metal fabrication. We are fabricating Welding cabins, welding robot platforms, Hydraulic oil Reservoirs, Frames, Burner casings, breaker bodies, filter housings, fan bodies, Cabinets, Electrical cabinets, Welded frames, Skids Welding (MIG, TIG, Electric Arc) Laser cutting parts and services Pipe cutting, bending and forming Sheetmetal cutting,bending,folding and fabrication Welded machine parts and assemblies (Structural steel and also Stainless Steel ) and deburring Machining, Turning and Grinding Wet Painting (Epoxy, 2K primer, Zinc Primer, PUR Acrylic etc) Powder coating ElectroZinc Galvanisation, Hotdip galvanisation Automation projects and machine design and building COMPANY OVERVIEW : KREA Established in 2004. Locations : IZMIR / TURKIYE (TR-035730) 100000 sqm Turnover > 10 Million EURs Personnel > 210 Certificates : ISO EN 1090 EXC 3, ISO 9001, ISO EN 3834-2 (eq DIN 18800-7), ISO 9606, ISO 45001, ISO 14001 , AD 2000 Merkblatt, PED 97/23/EC pressurised vessels We have two IWE International Welding Engineer in the company. WPS and PQR and also NDT (UT/MT/LPT etc) Target Market : Compactors, Excavators, CNC mAchines, Marine, Offshore, Automotive factories, Cement Industry, Earth moving machinery, Structures and construction, Welding robot cells, Hydraulics Mr. Tansu OZCELEBI Tel: +90 232 877 11 99 Fax: +90 232 877 04 90 email: sales@kreamakina.com We feel the support of Turkish government. http://www.kosgeb.gov.tr/
    > Read more
    Employees
    200 - 500
    Year of foundation
    2004
    Certifications
    DIN EN ISO 3834

    Watch

    LOMAN s.r.o.

    We are a modern family enterprise. We are the producer of high quality serial and piece components for engineering industry, mainly specialized in manufacturing and delivery CNC machined parts, welded parts and machined castings. We produce according to customers technical documentation.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2002
    Certifications
    ISO 9001:2015

    Watch

    ANOK PRECISION MANUFACTURING (SHENZ...

    Anok is a professional manufacturer in China , specialized in precision machined part, mold making and plastic products production. 1). Precision parts: turning,milling, grinding, CNC ,EDM, est. The tolerance can reach in 0.002mm. 2). Mould includes: Injection Moulds + die casting mould +IMD mould+ Blowing mould + Rubber mould + Mould Inserts 3). Plastic products includes Medical / Electronical equipment, Automotive parts , household appliances,Telecom devices, General usage. Pls refer to www.anok-precision.com for detailed products pictures. Anok is ISO certificated factory. Many European and North American customers choose Anok after their quality audit in China, for our vertically integrity new facilities,satisfying quality, best price and most cooperative service. Here you could get some our technology sharing fromour Facebook link below: https://www.facebook.com/anokmould We commit on a "3P" principle: "professional“: our experience stretches over decades , giving you more expertise and effective, feasible technical support for your project in mold and machining field to push it towards. ”precision": we offer a strict approach in customers' project measurement and ensure the result applying to their tolerance requirement. The thinnest steel part we made is 0.6mm,plastic part is 0.15mm. the tight tolerance we reached is 0.002mm . “progressive" : we always keep "updating" both facility and ability, finding and producing solutions compared to that what we received. Any questions or enquires, contact our staffs freely .
    > Read more

    Watch

    Goodwill Precision Machinery (Germa...

    Goodwill Precision Machinery Co.,Ltd (GPM),is a China manufacture established in 2004, Specialized in offering precision machining service for non-standard mechanical parts, spare parts, metal fabrication, precision welding, design & assembly, fixture and jigs with supplied drawings, prototype,CNC precision machining,customed machining parts...... Manage our company with ISO9001:2008 , TS16949 ,ISO13485 .ISO14001 certificated, customized ERP & Barcode Scan System. Our advantages: Easy to communicate in English,German,Japanese One Package Services Fast lead time Stable Quality Rigorous work attitude No quantity limited
    > Read more
    Employees
    500 - 1000
    Year of foundation
    2004
    Certifications
    IATF 16949:2016

    Watch

    Bechtold GmbH

    For over 40 years, we are now a well-known partner in the industry, the crafts, the exclusive trade, and selected service providers. We offer laser cutting from simple to complex assemblies highest quality solutions and deliver worldwide. Our great strength lies in the wide range of our manufacturing capabilities: For heavy machinery, precision parts or sophisticated decorative items - with everything we have years of experience. Our Services: - Laser cutting - Stamping - Nibbling - Edge - Welding (Approval DIN EN 15085-2) - Drilling / threading - Spot welding - Stud Welding - Rivets - Pressing - Mounting ... Our process chain we supplement with long-term partners to meet all requirements: In the foreground are surface treatments such as powder coating, wet paint, Kepla coat, polishing, grinding, and all galvanic coatings. Machining operations of all kinds, from the simple to the complex welding chamfer milling or turning part will be integrated into the production process.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1966
    Certifications
    EN 15085

    Watch

    Sichuan Ideasys Precision Machinery...

    Sichuan Ideasys Precision Machinery Co., Ltd. has more than 2000 square meters of production area, precision machining of various mechanical parts. The business includes wax loss precision casting machining, forging machining, die casting machining, bar, tube and sheet machining. Materials cover stainless steel, heat-resistant steel, carbon steel, low alloy steel, high temperature alloys, non-ferrous metals. With advanced production equipment and testing equipment, strong ability of mold and product design / production, casting production and precision machining. Sichuan Ideasys Precision Machinery Co., Ltd. is a engaged in products research & development as one of professional manufacture with rights of import and export. Main products: castings, forgings, precision machining parts, die casting, other mechanical parts and assembly parts for export.  Business services to the wide range of automotive, fluid chemistry, electrical fittings, medical equipment, food machinery, petrochemical equipment, engineering with assembly and so on. Company has nearly 20 stable customers and communities, products are mainly exported to North America, European Union, Australia and more than 20 countries and regions. With a strong human resources, advanced technology and equipment, leading technology, innovation and R & D team, quality service and modern management tools, honed through years of competition in the international market and become quality supplier of GE、BOSCH、Voestalpine、Audi、Foster Wheeler and many other well-known international buyers. With the "integrity first, service first" business philosophy and "innovation, pursuit of excellence," entrepreneurial spirit, we whole-heartedly welcome the world friends come to consult and negotiate business for mutual great development!
    > Read more

    Watch

    PRO CNC GmbH & Co. KG CNC-Fertigung...

    "A systematic approach to solution" The company PRO CNC GmbH & Co. KG was founded on 01.12.1990 by Michael Pfeiff under the name Michael Pfeiff. The company's headquarters was first in Varl and was moved in 1994 after Luebbecke. On 01.09.2003, the company was acquired by the current owner Volker Meier kink and then operated under the name Pfeiff toolmaking. Since 01.09.2013 we now operate under PRO CNC GmbH & Co. KG - Production Engineering and Mechanical Engineering. Mr. Meier is one kink with the company since the very beginning. The company PRO CNC GmbH & Co. KG deals with the full range of mechanical manufacturing (turning, milling, drilling, grinding) and the assembly of components and machines. Focus here is the contract manufacturing in the milling, especially the production of small parts. Cubic parts up to an edge length of 1000x600mm currently can be handled in-house CNC PRO GmbH & Co. KG. The company PRO CNC GmbH & Co. KG is able to deliver to the customer from the initial sample to mass production all.The range of parts includes the classic item to automobiles mass part. Is manufactured to eleven computer-controlled machine tools and machining centers the latest generation with up to four axes and two spindles. Some of the machines are equipped with rotary tables change. As a manufacturer, we would like to mention, among others, Bridgeport, Brother, YCM and Swabian machine tools here. The rotation range is among other things a lathe with driven tools, Y-axis and bar feeder (Biglia B650Y-turning diameter over bed max. 400mm) are available. Programming is based on dialogue and DIN controllers and by means of a CAD-CAM work on SolidWorks basis. Currently, the company PRO CNC GmbH & Co. KG two masters, a mechanical engineer, eight skilled workers, five assistants and a force in the commercial sector employs. The customer base includes about 30 customers from all sectors of the craft and the industry (electrical, mechanical, automobiles, pharmaceuticals, chemicals) in regional areas. Its customers include names like: VW, AEG, Federal Mogul, Faurecia (automotive sector) Harting, IMA, Kolbus, Oystar (engineering sector) VTG wagon Graaff, EuroMaint Rail (rail-rail vehicles) In May 2004, the company has been certified according to DIN ISO 9001-2000 since 2010, accordingly to DIN-ISO 9001-2008.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1989
    Certifications
    ISO 9001:2015

    Watch

    PMT GmbH

    Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials. We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more! We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2005
    Certifications
    ISO 9001:2008

    Watch

    CGS S.r.l.

    CGS Srl is born as artisan company at the end of the sixties to assume, more and more, in the years a real industrial structure; currently it occupies an area of 1500 square meters where work about twenty employees. CGS manufactures a wide range of products including precision components and small parts, drawing fittings for the earthmoving industry, agricultural machinery and oleodynamic systems, as well as components ready for a wide range of industries; They complete the range of transmission organs such as angle heads and jacks and magnetic devices, solenoids and rigators. Thanks to decades of experience and the sensibility and attention for the demands of the clients, CGS Srl is able to offer personalized solutions and high quality by ensuring advice and assistance in the phase of pre-sale until delivery. The technological adjustment and the continuous search of operation models more and more to the state-of-the-art allow CGS to propose to the own clients efficient and effective solutions both beginning from the particulars present in catalog and beginning from the sketches and from the specific applications of the clients. This approach based on the support to the client and aimed to the flexibility allows CGS to affirm its own presence on the Italian and European market more and more. Turning, finishing and treatments CGS is equipped with two production units that perform all the necessary turning operations, organizing overlapping production to ensure a total daily production capacity of approximately 60,000 hours on 17 turning centers. CGS Srl is able to realize precision components with diameter between 3 and 70 mm; the worked materials embrace the whole range of the automatic steels,from reclamation, cementation and good part of the stainless further to brass, aluminium, bronze, copper and plastic materials. Finishing works CGS also has a specialized department in the following stages of finishing: - Reaming, Tumbling, Milling with No 2 vertical machining centers, Lapping, Countersink, Deburring, Surface rolling, Assembling with the possible management of commercial components or supplied by the customer, Micropunting Marking. Grinding processes The department designated about grinding works performs the following manufacturings: - Centerless and Plunge grinding with tolerance of 3-5 microns and roundness of 50% tolerance - Grinding on centers, surfaces, centerless and superfinishings where tolerances are outside of what we can obtain internally. CGS guarantees accurate control of the quality of the works implemented, and therefore of the finished detail delivered to the customer. Washing the parts with ultrasonic and vacuum technology - For all the details that need to treated, they are washed at the CGS production department, before starting the external treatment required to obtain the best result in terms of quality and efficacy of the treatment itself; - All untreated ferrous items are delivered after a suitable washing phase during which a protective substance is applied, with a guaranteed 3-month standard length, which can be extended on request.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2008
    Certifications
    ISO 9001:2015

    Watch

    Hamptons Ltd.

    We specialize in machining high precision metal components​. Based on our customers’ orders, we define the technology and production methodology as well as machine the parts in small/medium series. ​ Typical industry applications:​ Energy, Mining, Subsea, Bolt tightening up to 2500 bar.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1993
    Certifications
    ISO 9001:2015

    Watch

    A.D.O. Zerspanungstechnik GmbH

    The family ADO was founded in 2001 and since then performs turning and milling of individual items, as well as to small and medium series by. The good cooperation with competent partners makes it possible also to offer our customers yet another addition service. These include round and flat grinding, all welding processes, laser and flame cutting and surface treatments and hardening process. In addition to a flawless, high-quality execution, our company is a fast, economical and flexible to the customer, which is enabled by our lean and efficient disposition. Due to our PPS system and the MDESystems we are able to individually adjust our production to our customers and respond to particular emergencies. Through this technique, we can guarantee our customers absolute punctuality in every situation. We guarantee the quality of our work you through competent and motivated employees.Through our clear mission run, the DIN EN ISO 9001:2008, we guarantee quality and punctuality. On request, we conduct a 100% inspection of parts. Machining Using the latest CNC technology, we are capable of meeting your requirements, whether single piece or series, to meet the highest quality. Quality assurance We guarantee the quality of our work you through competent and motivated employees. Through our clear mission run, the DIN EN ISO 9001:2008, we guarantee quality and punctuality. On request, we conduct a 100% inspection of parts. Measurement Quality is our highest demand - measured with the latest 3D coordinate metrology. Frästeile max. Length 1020 mm max. Width 650 mm max. Height 500 mm Turned parts max. Diameter 600 mm max. Length 800 mm Flange components max. Diameter 600.00 mm max. Length 800.00 mm Screws, connectors, and gears max.Diameter 600 mm max. Length 800 mm
    > Read more
    Employees
    10 - 20
    Year of foundation
    2001
    Certifications
    ISO 9001:2015

    Watch

    H. P. Kaysser GmbH + Co. KG

    For more than 60 years H.P. Kaysser GmbH + Co. KG has been belonging to the internationally accepted best sheet metal processors on the market. As a customer-oriented, family run medium-sized enterprise we produce with more than 300 dedicated employees at our locations in Nellmersbach (near Stuttgart, Germany) and Bistrita, Romania. Our strengths: An incredible versatility and an unique density of technology offer – paired with experience and technical knowledge of our well-trained employees. Our LernFabrik is evidence for consistent training and education schemes for our staff. 12 workcells guarantee the entire machining under one roof. Integrated system solutions complete the manifold programme with big advantages for our customers. It basically applies: Together with our customers we look ahead. Our customers benefit from the consolidated knowledge we established for years. We utilize our synergies and thereby extend your lead in market together. In collaboration our 3-F-formular applies: far – flexible- fair Our ambition: - best partnership - a long lasting, successful collaboration with all of our regular customers - discretion and exclusivity agreements if desired - mutual esteem and ethical behaviour Our motivation is the satisfaction of our customers.
    > Read more
    Employees
    200 - 500
    Year of foundation
    1947
    Certifications
    DIN EN ISO 3834

    Watch

    FERRINOX S.R.L.

    Ferrinox was founded in 1967 from the entrepreneurial initiative of the Ferro family. Our company is specialized in metal sheet processing especially for laser-cut, punching, folding, moulding, welding and surface treatments of stainless steel, iron and other metals. Thanks to our know-how and our machines of the last generation that are constantly updated following the latest technologies, we are able to supply our customers with top-quality products and service. We have a wide experience especially in these applications: metal-sheet components for electrical appliances, frames for electrical appliances, metal-sheet components for the lighting and ship-building industries and industrial gastronomy.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1987
    Certifications
    DIN EN ISO 3834

    Watch

    WKK Kaltbrunn AG

    WKK Kaltbrunn AG - enormously in form The beginning of the WKK Brunn AG is founded in 1967. As a dedicated tooling the company had at that time only one purpose: the production of cutting, bending and forming tools. Shortly thereafter, the fabrication shop was put into operation and some ten years later, the company introduced her first own product. By continuity, innovation and perfection was out of the formerly peaceful Toolmaking a successful SME with about 45 employees.Today, the CHP is an international punching operation with most modern manufacturing methods in the supplier sector. enormously complete - from the first idea to the final series, we offer comprehensive services - Consulting: individual and professional, on-site or at our - Construction: in-house with 3D Autodesk Inventor - Prototyping: short to illustrate your ideas - Tool: for punching tool and teaching building, with modern machinery - Series production: stamping products of all types up to 250 tons of pressure and up to 300 mm width at 3 mm thickness (up to 5 mm after consultation) made of steel, stainless steel, non-ferrous and light metals - Component manufacture: Total manufacturer of your products, automated assembly - Post-Processing: Heat and surface treatments for partners near - Finish machining: by machining (milling, turning, drilling), eroding and vibratory finishing - Did you know? Also welding
    > Read more
    Employees
    20 - 50
    Year of foundation
    1967
    Certifications
    ISO 9001:2015

    Watch

    Werner Rauscher - Feinmechanischer ...

    The company Rauscher has been active for different industries since 1984th The realization of specific customer requirements We achieve this through our modern and diverse machinery. Fully automated loading and unloading systems, we ensure a high Productivity in the production of turned parts. Do you have technical questions or want more detailed information? Then call us on the number 089/793 20 41, or send an email to: info@cnc-dreherei.com We advise you individually and in detail in your affairs. Translation by Google Translate
    > Read more
    Employees
    5 - 10
    Year of foundation
    1984
    Certifications
    ISO 9001:2015

    Watch

    CMP di Paganotto Deris srl

    Professionals in the metal-mechnical sector since the early Nineties, we operate on commission, guaranteeing rapid service and products that aspire to perfection in order to satisfy the needs of the customer in the best way. We not only respond promptly to inquiries, but we can always propose innovative solutions and products made to measure, thanks to the flexibility of our organization and production. We operate in every sector of high precision mechanical processing and scrap removal. In the production of high precision mechanical parts, lathing is an essential process and we perform it on small, medium and large lots. With a 5-axle continuous work center we perform milling processes with the maximum productivity. We are specialized in welding small runs for samples and for the production of single pieces for medium-heavy carpentry.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1992
    Certifications

    Watch

    INSTALO BG

    Instalo BG Ltd is a manufacturing company already known as a reliable partner in the production of tailor made equipment and metal fabrication subcontracting. The continuous interaction between our R&D, production planning and quality ensures to our customers innovative and winning solutions. Investing in state-of-the-art technologies, modern organization on quality, environmental and safety issues, today we can cooperate with big multinational companies in our markets of reference. In order to meet customer needs we elaborate and deploy ourselves in the following fields: • Subcontracting sheet metalwork • Mechanical and electrical assembly �� Design and production of custom-made equipment • Engineering consultancy services Our range of final products are applicable in the environmental engineering sector as follows: • Municipal, industrial and potable waste water treatment plants • LandfillS for municipal solid waste • Steel metal fabrication Our staff expertise gained by practical experience helps us understand every project needs. Therefore we at Instalo BG try to keep high standards in: • Equipment support at design stage in process and engineering matters • Innovative methods and resource flexibility • Processing of relevant engineering documents • Project engineering department equipped by 2D / 3D CAD workstation. • Development of structural projects by means of FEM tools Our machine park works in compliance with environmental requirements with regard to functionality and we do try to use the optimum materials with efficient operation of equipment: • Plasma cutting machine • Laser cutting machine • Deburring machine • Roll bending machine • Bending machine • Welding machines • Lathe, turning and milling machines • CNC machining • Cutting machines The goal of INSTALO BG is to provide our customers efficient, reliable and innovative solutions, competent advice and reliable services. Thanks to our skilled staff we are able to propose to our clients experience, knowledge and vision of our design and construction activities.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2010
    Certifications
    ISO 9001:2015

    Watch

    Torneria Nicoletti Srl

    History: The Torneria Nicoletti is a mechanical turnery located in Trissino, near Vicenza that was founded in 1967 and has 4 locations with about 5.000 square meters cover and employs more than 120 people. Capacity: Our company is specialized in the production of turned parts made in Steel, Stainless steel, Aluminium, Brass, and Copper, having a diameter range of diameter 3 to 150 We have got more than 60 turning machines, Multispindle, Singlespindle, CNC machine as double spindles and Sliding head. With these machineries, we are able to execute order from 10 parts to 3.0 Million and we produce more than 40 Million of turned pieces every year. To control our products we have eleven points of control with instruments connected to a computer where we use an SPC control, with this system, we are able to issue certificates of control with the measurement during the process and check the cp, cpk and cmk. Certification Our company has been certified ISO 9002 since 1996 by DNV and update the newest UNI EN ISO 9001:2015. And OHSAS 18001:2007 since 2013 and UNI EN ISO 14001 since begin 2019 Goals to supply products with a defect rate "tending to zero". to produce parts that satisfy specific use requirements with particular care for appearance and functionality. To respect delivery times Sector We export more 65% in all European countries and in a variety of sectors; including the automotive, car industries, bicycle and motorcycle, oil-pressure, thermohydraulics, pneumatics, hobby-accessory industries etc. If you need more information, you can visit our website or you can call me. If you would need some offer, please do not hesitate to send me an inquiry, I will be so glad to answer you as soon as possible.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1967
    Certifications
    ISO 9001:2015

    Watch

    Aloys Kleier GmbH & Co. KG

    The owner-managed company Aloys Kleier is a service company in the field of small-scale component manufacturing, hardware and electrical installation. As a cooperation partner of the industry, we bring by screws, rivets, welding and gluing together on 4000 m² of production space, what belongs together. In addition, our staff have many years of experience in the fabrication and installation of staircases, ramps and railings, pipelines, metal and welded constructions of all kinds Our range of services is complemented take over all activities of a classic Metallic, ie including sheet metal and metal processing including welding, Kant, drilling and sawing and we done quickly and efficiently. The customer gets to us all from one source. We service the products from purchasing to warehousing, manufacturing, assembly, logistics and all emerging problems. Flat hierarchies fast communication and flexible production methods are guaranteed. All orders we carry uncompromising from the complete satisfaction of the client. Partnership based on trust and maximum quality form the common success for both sides and are the basis for a long-term cooperation.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1982
    Certifications
    DIN EN 1090

    Watch

    Kreutz & Mock GmbH

    About us Kreutz & Mock is a medium-sized company and the leading manufacturers of wire bending parts of all types. With over 3000 different articles we can offer our customers a wide and diverse range of different wire products. The necessary machines for the production are developed and built in-house by our own engineering department which gives us the possibility to always be flexible according to our customer's needs. You can find further details about us and our philosophy on our website. Products We manufacture wire bending parts in all sorts of variations and models. We supply many industries with our products like the automotive industry, construction industry, agriculture, blinds manufacturers and many more. We also have numerous technical bent parts in our repertoire. We are happy to try to achieve your specific needs and requirements, because quality, punctuality and being in step with actual practice are our basic principles to deliver high quality as well as best functionality products. It does not matter whether they are single quantities, small quantities or a large series. We are flexible and deliver quality at fair conditions. We offer + Qualitycertficate DIN ISO 9001:2008 + in-house specified tool construction + in-house machinery construction + quick production of samples + technical and experienced know how + skilled telephone service + large production spectrum Materials Every material processed in our factory has a dedicated inspection certificate that will be provided with your delivery on request. We manufacture bent wire components for you in all variants and materials. Here a selection of the materials used: + Stainless steel wire 1.4301, 1.4310, 1.4362, 1.4401, 1.4404, 1.4571 in different tensile strengths + Spring steel wire 0.9 mm to 6.0 mm. Qualities A, B, C, D + Steel wire C9D bare or copper-plated. C9D soft galvanised in 1.0 mm to 8.0 mm + Crapal wire + Becrosi valve spring wire + Silver and Palladium wire
    > Read more
    Employees
    20 - 50
    Year of foundation
    1934
    Certifications
    ISO 9001:2008

    Watch

    TME Maschinenbau GmbH

    Since its inception in 1999 we have specialized in the manufacture of parts and series in the area of turning and milling, and are active throughout Europe. Regular investment in new technologies and manufacturing capabilities ensure optimal quality and customer satisfaction. Good Quality begins with a high-quality production equipment, efficient processes and a clear structure. Continuous development is the foundation of our success. We employ 35 employees in administration, construction and manufacturing. Join our 4 trainees for precision mechanics and in administration. The cooperation with TME is open, direct and uncomplicated. Our clients include companies in the areas of: Engineering, tooling, laser technology, and aerospace and automotive industries. Service overview Production / manufacture of components We manufacture parts, spare parts and small series to mass production according to your drawings or a pattern. Our machining capabilities include CNC-controlled milling, drilling, turning, wire EDM, surface grinding and conventional crafts and sheet metal processing. We can use our processing centers, parts machining, up to the size: L = about 2100, W= about 1000 B =, H = about 600 and up to a weight of 6500 lbs. Construction Design of tools, fixtures and equipment. 3D modeling for prototyping. Support for design tasks and advice on cost-effective and production-oriented manufacturing of your parts during development. CAD / CAM Acquisition and processing of all popular file formats such as : STEP, SAT, IGES, DWG and DXF programming with our CAM system. Welding / Heat treatment The welding of steel and heat treatment (hardening, tempering and annealing) are also of parts of the scope of our processing. Surface treatment Surface treatments, we can perform at our partner companies. Assembly Assembly of parts, components, tools and equipment. Reports On request, we create initial sample inspection reports and test protocols. Delivery We deliver your products on time with shipping or parcel service. We are a professional partner, trust TME!
    > Read more
    Employees
    20 - 50
    Year of foundation
    1999
    Certifications
    ISO 9001:2008

    Watch

    Baier Drehteile GmbH&Co.KG

    Manufacturer of series turned parts from all cut materials according to your specifications. In addition to being a reliable supplier, our major passion is the development of optimum solutions.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1971
    Certifications
    IATF 16949:2016

    Watch

    Peula UG haftungsbeschränkt

    CNC contract manufacturing, welding assemblies, individual parts, serial parts ORGANIZATION PLACE: GERMANY- Order logistics and deliveries through our own group transports up to twice a month. Goods are delivered with a German invoice, without further or hidden costs. PRODUCTION LOCATION- Bosnia and Herzegovina, EX-YU Läder MANY POSSIBILITIES- We combine our own production with our subcontractors' capacities in a pure source. Parts are carefully checked and only then delivered! STORAGE- In Germany (75417 Mühlacker) we can store any batches in advance, check them again and deliver at short notice! EXPERIENCE- Long-standing (over 20 years) experienced employees in various manufacturing processes. We have been delivering to our German customers for over 5 years. RESPONSIBILITY- Goods we deliver are insured, but we always accept sensible complaints and find a solution that suits everyone! Over 30 companies in Germany procure goods from us. POSITIVE THOUGHTS - our customers are slowly becoming our personal friends! Working with friends is fun, security and trust.
    > Read more
    Employees
    < 5
    Year of foundation
    2020
    Certifications
Limit search by:
Region
Technologies
Materials
Company data
Industries
Certifications