2177 Suppliers found
List
Raster
Map
Sorted by 
Go to watch list 0

    Watch

    MSB Kunststofftechnik-Apparatebau GmbH

    We are a plastic manufacturing company which deals since 1982 mainly with the welding of thermoplastics (PP, PE, PVDF, PVC, ECTFE), with mechanical machining of plastics and processing with acrylic glass (PMMA, polycarbonate). Our focus during welding of plastics, components and assemblies for the solar, photovoltaic and semiconductor industry. In addition, but also the container and apparatus for exhaust air and waste water treatment industry as well as any custom or special equipment. From small weldment to Baugruppenverschweißung here goes our spectrum in the hot gas welding process. Of course, with certified welders and specialist registration! For the mechanical processing, we have a large machinery available in the main, deals with milling and turning parts made of plastic. With our 3-u.5-axis milling machines we are able to produce for you according to your specifications and desires in a position the most complicated parts.Furthermore, we can edit our portal milling machines with vacuum clamping plate sizes up to 2500x4000mm. Even in our acrylic glass processing (PMMA, PC), we have a wealth of experience and are thus a strong partner in the fields of engineering, trade fairs, special equipment manufacturing and all other possible single, serial, and special parts. In addition to bending and gluing, we have recently become a flame polisher with which we can polish but also hard to reach places brilliant for you all edges. Please send us your request, we will respond as soon as possible. A careful design of all offers we can assure you already.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1982
    Certifications
    ISO 9001:2008

    Watch

    VZMETI d.o.o. / Federn und Feder-El...

    VZMETI Babosek Branko s.p. from Ptuj is a modern, innovative service company, which was founded in 1990. The company is manufacturing springs and spring elements. During our business we were able to establish a number of successful and effective partnership relationships with renowned companies in various fields, mechanical engineering, thermal engineering, electronics and automotive industries. The combination of modern machines and experienced staff, enables us to manufacture highly complex springs and spring elements. If you think you need our service please call us and we will be happy to accommodate your needs. Best regards, Branko Babosek General Manager https://www.youtube.com/watch?v=UK-qNyz6Axc
    > Read more
    Employees
    5 - 10
    Year of foundation
    1990
    Certifications
    ISO 9001:2008

    Watch

    Pecher Kunststofftechnik GmbH

    Containers and tanks in all materials, shapes and sizes e.g.: GFK (glass fibre reinforced plastics), PE-HD, PP, PVC, PVDF and as composite material like PVDF/GFK or PP/GFK carried out as round, rectangular, oval or triangle containers / tanks, also with insulation and / or cooling and heating mechanisms for special assemblies. Milling and turning parts made of all plastics (precise CNC-machining of PP, PE, PVC, PVDF, PTFE, etc.)
    > Read more
    Employees
    20 - 50
    Year of foundation
    Certifications

    Watch

    Böhl-Kunststofftechnik GmbH & Co. KG

    Innovative plastic products since 1989 The BÖHL-plastic GmbH & Co. KG specializes in the production certified technical precision injection molded thermoplastics. We cooperate with raw material manufacturers, but also with colleges and universities. Because the plastic processing is a challenging topic. Individual solutions are our strength. Our activities span the injection molding production for the lighting and automotive supplier industry. We are also working for the industries fittings, electrical and electronics, medical, furniture, steel and textiles. The headquarters of our plastic processing company located in southern Westphalia. Here we present for you since 1989 plastic parts from all common thermoplastics ago. We are supported by our own mold.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1989
    Certifications
    ISO 9001:2015

    Watch

    Miglio Emilio S.R.L.

    We are suppliers "historical" Customer paramount operating in various sectors. Especially in the field appliances boast ten collaborations that, in some cases, exceeding 40 years. Our specialization is to provide the customer a 360 degree service from the idea or project / co-project, the construction of molds-equipment manufacturing to delivery of the finished product. Among our main products we veneers of each type and material, balancing hinges for kitchens covers and flush, aesthetic parts, electrical connections and moving joints. Our fleet, as well as several presses (up to 200t), two wire erosion, a plunge erosion, a business center and a variety of other machine tools, also has two assembly units designed and refined internally in the company specifically dedicated to realization of particular assembled groups. We are certified ISO 9001 since 2007, we design with the latest applications (Creo PTC) and build our internal molds, equipment and assembly machines with which we produce the finished product.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1971
    Certifications
    ISO 9001:2015

    Watch

    Walther Wolf GmbH

    Mould CAD / CAM Measurement Engraving Wage arrangements in the area milling, EDM and fairs.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1907
    Certifications
    ISO 9001:2008

    Watch

    Adolf Ebhart GmbH

    We, the Adolf Ebhart GmbH, have specialized in the CNC machining of all industry-standard materials. A special know-how of our company is: * 3D milling * The burr-free drilling of non-metal pipes * The bending of non-ferrous metal pipes Our strengths lie in small series and prototyping. We are also open for large series production. Especially for the prototyping, we see our flexibility and, thus, short delivery times and rapid response to changes required as our great advantage. Our software features includes: * CNC program management * Programming Station / Cad / Cam with a possibility of data exchange (formats: DXF, IDGES) The preparation of the required CNC programs exclusively in our home by our expert staff. By accurately determining the machine operations, we achieve a high standard of quality and optimal processing times. We assure every client an optimal order processing from quotation to delivery. The transfer of our know-how for the needs of our customers is a matter of course.
    > Read more
    Employees
    5 - 10
    Year of foundation
    1996
    Certifications
    ISO 9001:2008

    Watch

    Kaeser Umformtechnik GmbH

    YOUR PARTNER FOR PRECISION DEEP DRAW PARTS We are specialized in the production of high quality deep draw parts made out of a variety of materials in small and medium lots. Due to our competent team, modern facilities and production know-how we can realize challenging tasks maintaining very short response times. High precision and certified quality go without saying in our production process. This is how we develop creative solutions and longtime partnerships. OUR CORE COMPETENCE In the deep drawing process metal sheets are being transformed into hollow bodies of different base geometries through draw and pressure forces without shaving. Decisive for optimal process results are not only particular machines and tools, but also great experience and creativity. As an example, we manufacture parts with an extremely small outside radius of 0,5 mm. Processing stainless steel sheets into deep draw parts with a material thickness of 0.05 mm up to 3 mm is our core competence. The maximum depth of draw that can be achieved is 180 mm. Obviously, we also process all non-ferrous metals as well as special alloys. Fields of application and product examples: The components that we produce are for instance used as bodies for pressure and temperature sensors in systems engineering, as battery-cell-bodies for technical applications, screen-housings for electromagnetic radiation, for military and aerospace technology, in household utensils, load cells or in runways of cargo airplanes.
    > Read more
    Employees
    5 - 10
    Year of foundation
    1990
    Certifications
    ISO 9001:2008

    Watch

    RACEPLAST Inh. Süleyman Ceyran

    Raceplast is a forward-looking company. Our clients receive individual counseling on a high technical standard and customized solution for all industries. As specialists in all engineering plastics in the following sectors: # Packaging industry # Medical # Laboratory technology # Food industry # Drive and Conveyor # Electroplating Quality is paramount; we offer best quality at fair prices in all functional areas. Nothing is more important to us than provide our customers the best possible quality. Speed and reliability to ensure a frictionless process; we are committed to a timely workflow from the request to after-sales service and pay close attention to compliance with this. It's rarely a question of reinventing everything. Rather to identify potential and get together to bring success.The best basis for cooperation: trust.Please send us your drawings or samples and we will make an offer for free. Product examples: - Chain guide - sliding rail - corner tracks - guide - profile - scraper - conveyor star - rotary parts - cutting board - workpiece carrier - turning workpiece - sleeve - slide bearing - conveyor screw
    > Read more
    Employees
    5 - 10
    Year of foundation
    2007
    Certifications

    Watch

    Otto Dunkel GmbH

    Manufacturer of connectors and contacts with our own production and our own tool shop
    > Read more
    Employees
    500 - 1000
    Year of foundation
    1942
    Certifications
    ISO 9001:2008

    Watch

    Ernst Nachbur AG

    Welcome to the Nachbur AG, your specialist for turned parts, precision turned parts, turned parts and assembly The Nachbur AG is a specialist for components and turned parts. So we manufacture precision turned parts, turned parts and turned parts. In addition, the assembly is part of our field of activity. We will work for you as a contract manufacturer. Whether CNC turning, production of precision parts or assembly - we put the customer at the center. 1947, our company was founded for turning parts and assemblies. Since then we have gained extensive know-how for the production of precision turned parts, turned parts and lathe parts. A strength of our company is the high quality of the turned parts and assemblies. All production processes of Decolletage and assembly are strictly monitored. Our quality management system for the rotating parts is also certified. Also an environmentally conscious production of precision turned parts, turned parts and lathe parts sets us apart.For the environmentally friendly production of Decolletage our professionals develop special programs. For example, we pay attention during the shooting as well as the assembly always on the conservation of resources. Our environmental management system for the rotating parts is also certified. In our Dreherei the latest machines for turning are available. For the rotational work naturally includes sanding and cleaning the long turning parts, turned parts, and precision turned parts. Thanks to a strong partner to deliver the CNC takes place - Turned parts worldwide. The Nachbur AG offers customers in the filming of various solutions. We manufacture pattern of precision turned parts, turned parts and lathe parts. Do the rotating parts to the customer, we ask this in produce small to large series. Our precision parts and Turned Parts are used in various industries. How to find long turning parts, precision turned parts and turned parts used in medicine, hydraulics and electronics industry.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1947
    Certifications
    ISO 9001:2015

    Watch

    VS GmbH & Co. KG

    The VS CAST AG is a leading company for the production of thin-walled castings of black and white malleable and gray and ductile iron with a weight of 1 g to about 2,0 kg. Every month, around 15 million pieces of various design are produced. Our manufacturing process enables the casting of complex geometries with wall thicknesses from 2 mm thickness. We often reach already in the raw casting a significant reduction in component weight. By realizable tight tolerances and smooth surface, we offer an affordable alternative to investment casting, forging, stamping and die cast parts. We manufacture on fully automatic forming machines. This economical production is guaranteed, we are interested in large quantities. In close cooperation with our customers, we provide the necessary know-how on the technical implementation of complex requirements. Because of our unique model of our technology and fine clay-bonded sand have our castings on a clean surface finish and high dimensional accuracy and guarantee substantial material and processing savings.The finishing and surface finishing ¬ edelung of castings is also available on most modern facilities. As a specialist in small and malleable cast iron parts we can offer our customers a variety of markets such as the automotive, electrical and lock industry, the machinery and mining, fastening technology, and interesting from many other sectors and effective solutions. We are working on an international basis, our export rate is about 70%.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1923
    Certifications
    ISO 9001:2008

    Watch

    Esterer Gießerei GmbH Esterer Gieße...

    SEAMLESS ALL-ROUND SOLUTIONS As a specialist foundry we concentrate on your ideas and requirements, and on implementing them in castings of up to 4 tonnes made from various materials. Simultaneous engineering, prototypes, and small and medium-sized production runs are our strengths, giving you the benefit of unusually short delivery periods, security of processes and reliability. Our core competencies are in the following fields: Machinery and plant manufacture Construction plant spare parts
    > Read more
    Employees
    100 - 200
    Year of foundation
    1862
    Certifications
    ISO 9001:2008

    Watch

    I.T.S. Präzisionsteile GmbH

    Dear Ladies and Gentlemen, We work according to the guideline of ISO 9001:2008 and our lived quality "zero error rate" is always appreciated by our customers. At the same time, we are quickly able, flexible and timely manner to fulfill our orders. An average delivery time of less than 10 working days confirmed.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1985
    Certifications

    Watch

    Proto Labs GmbH

    > Read more
    Employees
    100 - 200
    Year of foundation
    1999
    Certifications
    ISO 9001:2008

    Watch

    Hermann Sefranek GmbH & Co. KG

    The company Hermann Sefranek GmbH & Co. KG was founded in 1885 and is now run by the fifth generation. The company is specialized in sheet metal processing. The product range includes parts for suction, ventilation systems, pipes, special sheet metal parts and weldments. The possible processing methods include laser and plasma cutting, punching and nibbling, edges, and much more rounds Are processed steel, stainless steel, aluminum, titanium, copper, and other materials. We are happy to advise you in the design of components or construct them for you. With SolidWorks 2010, we have a powerful CAD system with which we can process all common file formats.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1885
    Certifications
    DIN EN 1090

    Watch

    Goodwill Precision Machinery (Germa...

    Goodwill Precision Machinery Co.,Ltd (GPM),is a China manufacture established in 2004, Specialized in offering precision machining service for non-standard mechanical parts, spare parts, metal fabrication, precision welding, design & assembly, fixture and jigs with supplied drawings, prototype,CNC precision machining,customed machining parts...... Manage our company with ISO9001:2008 , TS16949 ,ISO13485 .ISO14001 certificated, customized ERP & Barcode Scan System. Our advantages: Easy to communicate in English,German,Japanese One Package Services Fast lead time Stable Quality Rigorous work attitude No quantity limited
    > Read more
    Employees
    200 - 500
    Year of foundation
    2004
    Certifications
    ISO 9001:2008

    Watch

    Rudi Schindhelm Metall GmbH & Co. KG

    Your supplier of assemblies of pipe and sheet everything from one source: 3d laser tube Pipe bending Sheet metal laser Bending CNC turning Robot welding Assemblies
    > Read more
    Employees
    50 - 100
    Year of foundation
    1988
    Certifications
    DIN EN 1090

    Watch

    Anlauff GmbH

    CNC precision turned parts of the precision experts! For over 40 years, designs and manufactures the Anlauff GmbH Precision turned parts and assemblies in a variety of materials such as steel, stainless steel, aluminum, brass, bronze and even plastic. A detailed list of materials is listed below. Our many years of experience as a top supplier of reputable companies that specific industry knowledge, eg in the automotive, hydraulic engineering, electrical engineering and hardware technology for maximum quality and maximum efficiency. We produce at the site Zimmern ob Rottweil (Baden-Württemberg) CNC machining parts according to your drawings and support you in the realization of individual rotating parts and assemblies. As sample parts in small batches from 1000 pieces and high-volume to 100,000 piece we produce fast, flexible and on time. Furthermore, we also offer an extensive parts service as Heat treatments ***: *** - Case hardening, annealing, induction hardening - Tenifer, tempering, hardening and tempering Surface finishes ***: *** - Zinc (Blue, Yellow, Olive, Black), thick-film passivation (Cr-VI-free) - Zinc / nickel, zinc / iron andvm - Tin plating, nickel plating, copper plating, hard chrome plating - Anodizing, phosphating, bronzing Finishes ***: *** - Milling, deep hole drilling, thread rolling, broaching, honing, bending, marking - Vibratory finishing, polishing, deburring, washing, inner and outer loops Processed materials: - 11SMnPb30 1.0718, 1.0715 11SMn30, - C15PB 1.0403, 1.0401 C15 - 100Cr6 1.3505 - 16MnCrS5 1.7139 - 42CrMoS4 1.7227 - ETG88, ESP65 - POM - MS58 CuZn39Pb3 2.0401 - CuSn12 2.1052 - Gunmetal CuSn7ZnPb 2.1090 - AlCuBiPb, AlCu6BiPb 2011 3.1655 - AlCuMgPb, AlCu4PbMgMn 2007 3.1645 - AlMgSiPb 6012 3.0615 - AlZn5Mg3Cu AlZnMgCu0, 5 7022 3.4345 - AlMgSiMnBiPb 6026 - AlMg4, 5Mn0, 7 3.3547 5083 - AlUn5, 5MgCu AlZnMgCu1, 5 7075 3.4365 - AIMgSi AlMgSi0, 5 6060 3.3206 - AlSi1MgMn AlMgSi1 3.2315 - Stainless steel 1.4305, 1.4301, 1.4021,
    > Read more
    Employees
    10 - 20
    Year of foundation
    1969
    Certifications
    ISO 9001:2008

    Watch

    Bartmann Maschinenbau GmbH

    Specializing. . . we are the manufacture of ready-to parts and complete assemblies from 3 pieces upwards. No matter whether it is for chromium-nickel steels (stainless-steel), heat-resistant steels, special steels and other materials, nickel alloys such as Hastelloy, iron and steel castings, hardened steels or Aluminum alloys, copper and other nonferrous metals are. Quality assurance. . . is the measure of all things for us. But here it is not at the end of the production process, but is provided by the first stroke of the pen planning to delivery by accompanying examinations. This integrated method to continuous quality inspection is due in large part to our success since more than 60 years. current certification to DIN EN ISO 9001:2008 Security. . . we offer even with delivery and processing of special materials, as we TÜV - have permission to re-stamping workpiece after the inspection certificate B (EN 500 49). Processing methods: CNC - Turning, CNC - Milling / drilling, boring, milling, turning, wire EDM, sawing, welding, blasting Summary Production of parts and assemblies by milling, turning, wire EDM, welding, assembly. Batch sizes for parts production: 10 to 20,000; (Focus: Stainless Steel) In-house design Fixture from lot size 1; Construction of soldering
    > Read more
    Employees
    10 - 20
    Year of foundation
    1974
    Certifications
    ISO 9001:2008

    Watch

    MWA Maschinenbau GmbH

    The MWA CNC technology is a medium-sized company in the field of mechanical engineering and materials handling. Our company has a permanent staff of qualified staff with many years of industry specific experience and outstanding expertise. An efficient, economical and high quality production requires high precision in all stages of production at constant quality control. We offer the full range of CNC turning and machining technology and are therefore capable of all jobs economically, accurately and cost-effectively handle. Quality, reliability and flexibility are the basis of our high level of customer satisfaction.
    > Read more
    Employees
    5 - 10
    Year of foundation
    2006
    Certifications
    ISO 9001:2008

    Watch

    GM PRODUCTION srl

    Our business is based on two types of processes: prototyping and series production. We work different kinds of materials such as: common and special steel, aluminum alloys, inox, and plastics. This versatility allows us to partner with those companies that require production of mechanical items, for different industries/organization such as: home automation, medical, energy, racing accessories, lighting and design accessories. Our production process involves careful and constant checks of each and every details from start to finish. Regarding the packaging we always choose the most suitable according to the type of product in order to maintain its integrity and for shipments we only ever use trusted couriers. For our work we use: CNC lathes machines; 4 and 5 axis CNC milling machines with robot for pallet change and maximum speed of 20.000 spindle rpm; cutting-off machines blade up to 600mm; eccentric presses.
    > Read more
    Employees
    5 - 10
    Year of foundation
    2011
    Certifications

    Watch

    GBM Mold Technology Co., Ltd

    Who we are? GBM = Good Better Mold, the mold maker who is always keep doing better. In 2006, we get our company name from the old English saying “Good Better best, never let it rest, until your Good is Better, and better best.” We only take Good and Better as we do not let ourselves rest for current achievements, but keep trying to make further progress. What we do? 1.Injection mold designing and manufacturing GBM is most competitive at making complex mould tools: * 2-shot molds (also known as 2-component mould), mold weight from 100kg to 5500kg. * Insert mold, especially shuttle mold using vertical insert molding machine * Unscrewing mold, especially for high temperature PEEK parts with both internal and external threads * Precision mold with precision inserts, we have successfully made injection mould with more than 1400 inserts. 2.Plastic injection molding a) Small runs production: low machine setup cost and fast delivery. From tool design to finished molding lead time as fast as 3-4 weeks. b) Mass injection molding: ISO9001: 2015 registered, strict quality control through IPQC, IQC and FQC process. c) Deep expertise of vertical insert molding and 2-shot molding, machine tonnage up to 1100 ton. d) After molding services including coating, printing, parts assembly and global delivery. 3. Engineering services GBM provide professional engineering services including mold design checking, tooling project management, plastic molding troubleshooting. Since 2010, till now we have 8-year’s tooling consultant for North American customer. What our customers say? “You can never go wrong from purchasing mold from GBM. Top level quality and service!” --Procurement manager, USA, Automotive Tier 1 supplier, Fortune 500 company “I think GBM is good for “Difficult” and “High value” projects!” --Business development manager, UK, plastic injection molding and tooling expert What we say to ourselves? Quality lies in the details. Keep doing it right when no one is looking. The high quality requirement for our products and services ensure not only our competitiveness but also the competitiveness of our customers. How to find us? Give us a call at 0086-755 27691164 or send us an email at info@gbmmould.com. We look forward to contribute to your success!
    > Read more
    Employees
    50 - 100
    Year of foundation
    2006
    Certifications
    ISO 9001:2008

    Watch

    Ulmer Maschinenteile GmbH

    Strengths and unique features of the UMT Our focus is in the production of complex and high-precision individual parts and small series for machine building. We manufacture and install assemblies to the finished machine including commissioning and function test. And that since 1995. Our production range we include any kind of turning, milling, grinding, drilling, painting, and assembling. Strengths in staff • We work exclusively with trained and experienced personnel. Thus we are able to build completely different machines including production. • We provide our clients with individual advice to manufacturing and installation, as well as new developments of machines and assemblies. • Through this technical assistance, the customer gets the chance to reduce its costs of production and to develop production-ready components. • Due to shallow levels of management, clearly defined tasks with short decision paths, open exchange of information between and within the areas a fast and flexible adaptation to changing requirements is possible. • Our ams.erp system supports and ensures the transparency of the offer process on the commercial management, from production to installation. • We have a perpetual license for giving our employees. • This guarantee is for customer satisfaction, flexibility, competence and reliability. Technical strengths • We ask ourselves individually to our customers, because we can enable much our know-how and machinery. Ranging from transfer units, machining centers, tool grinding, induction hardening machines, electron beam welding machines, special purpose grinding machines for the aircraft to complex devices for the automotive supplier industry. • Consulting, planning, purchasing, manufacturing, assembly, electrical and service - all from one source. • These are our modern manufacturing. Through the consistent expansion of the production machinery machining centers we are very flexible in processing.We produce cubic components up to a size of 1.80 mx 1.80 mx 1.8 m with the highest accuracy (5 μ). • All machining centers have tool storage with 240-350 tools, palettes, and swivel heads with 5-side machining. In this way we minimize the set up time and can go unmanned shifts. • With our modern universal grinding machines, we can thread, out of round, grind inside and waves up to a size of 200 mm dia x 1400 mm with an accuracy of 1 μ. • With our modern "pick-up" machine, we can carry out the complete turning and milling of turned parts cost. And this up to a diameter of 400 mm. • We assume 3D data into a modern programming system of Open Mind. This error can be prevented and fast programming of the machine is guaranteed. • All parts that we deal with are measured in our quality assurance with modern Zeiss measuring machines and creates audit logs. • All this is a guarantee for quality and precision.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1994
    Certifications
    ISO 9001:2008

    Watch

    InterTechnic s.r.o.

    Inter Technic sro has developed in more than 5 years into a powerful company. If you are interested, we work for you as an extended workbench or can help reduce overcapacity, then ask us. In January 2015, our machinery was another new and powerful 5-axis simultaneous milling extended Hermle C42. We have currently in another, new DMG CNC milling machine invested. - Table load up to 2,000 kg - Table size 1700 x 750 mm - Travel X = 1450 mm, Y = 700 mm, Z = 550 mm This machine is our production in addition to available from the KW22 / 15th A robot welding system was installed. This brings us to weld able TIG and MAG. We are very well set up for you to produce tools and jigs. We are happy to customize items, zero series, production parts or assemble complete modules. With two new wire EDM machines we can in 2-shift operation for you. Our machinery has been almost entirely reinvested. For quality assurance, is from March 2016 new Zeiss measuring machine available! For programming we use two CAD CAM - Siemens NX Unigraphics, Version: 8.5 programming stations and enables us to offer services to the 3-D machining. Another added advantage of unsrem companies: All contacts at Inter Technic spoke German except Slovak, English.
    > Read more
    Employees
    50 - 100
    Year of foundation
    2010
    Certifications
    ISO 9001:2008

    Watch

    Deschberger Metall- und Blechbearbe...

    The company Deschberger was founded more than 50 years ago as a blacksmith and repair shop for agricultural machinery and equipment. The trade including servicing of these machines was added later. At the customer's special machines and devices have been designed and manufactured for crop and nursery equipment. About 20 years ago we started with the steel construction and have been an important supplier of a well-known, global Innviertler company. This is our second core competence, sheet metal processing developed. For about eight years this business grew steadily and today we are a zuverlässlicher partner to businesses and industry. Large, well-known and globally operating companies, but also a lot of "small and medium-sized enterprises", we supply professional and reliable! In the main building Sindhörnig, about 600 m² production area, is our department "sheet metal work." In Altheim, approximately 800 m² production area, is the department "steel construction". Highly trained, absolutely competent skilled workers - many years associated company - are committed to our customers.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1931
    Certifications
    DIN 18800-7:20

    Watch

    Win-Tech Mold Co., Limited

    Win-Tech Mold Co., Limited is specialized in CNC Machining (Turning & Milling), Mold Making and Injection Molding. Milling Parts max. Length 1020mm max. Width 650 mm max. Height 500 mm Turning Parts max. Diameter 650 mm max. Length 800 mm We are committed to provide customers a great cost saving, high quality, timely fashion and the peace of mind manufacturing solution. Please feel free to contact us if you have any manufacturing needs, and we are happy to make you an offer. We are offering: CNC Machining CNC Turning CNC Milling Milled Parts Turned Parts Milling and Turning Parts Turning China Milling China Machining and Assembly Sleeve and Ejector Aluminum Parts Brass Parts Stainless Steel Parts Steel Parts Plastic Parts CNC Milling & Turning Automatic turning Form milling Machining CNC machined parts Injection Moulding Plastic Moulding Injection Moulds Plastic Moulds Mould
    > Read more
    Employees
    50 - 100
    Year of foundation
    2003
    Certifications
    ISO 9001:2008

    Watch

    Magepa Feinmechanik GmbH

    Magepa offers advice as strong precision engineering partners, among others Spacers, leaf springs and metal liners for mechanical engineering at. With over 50 years experience in stamping and forming, we have a deep understanding of the needs shall our customers. We also carry pipe bending by and manufacture precision sheet metal parts made of spring steel strip. With our expertise and our technical creativity, we provide our customers with solutions such as individual leaf springs, shims unique, special spacers, etc. Our standards are high. We want to understand you and your machine exactly. Together we will develop ideas and implement them with the latest technology. Precision engineering products for engineering such as metal liners and precision sheet metal parts made of spring steel strip, etc. are available in commercial quantities or as special.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1963
    Certifications

    Watch

    ODEC SA

    Young and dynamic company founded in 2011. CNC Lathe machining up to 20mm diameter. Equipped with high frequency milling centers up to 60'000 rpm. High pressure pumps 150 bars. Specialised in complicated parts and exotic materials.
    > Read more
    Employees
    < 5
    Year of foundation
    2011
    Certifications

    Watch

    Hong Kong Bostec Company Limited

    Company Profile Bostec is a Hong Kong Enterprise company and established since 1993 to specialize in mould design, manufacture, plastic injection and product development. In year 2000, the company moved to China-Dongguan to take advantage of the economic climate there. For over a decade of expansion, our company has achieved the recognition of being an international professional plastic mould producer for our customers from Europe and Asia Pacific regions. Bostec has many years of industry experience. The staff have a consummate wealth of experience in mold design and process arrangements; and we have a complete range of plant machinery and equipment, with all kinds of mold processing equipment, such as: wire cut machines, precision surface grinding machines, semi-automatic grinder and vertical milling machines EDM and CNC machines, etc. We have strict and high-standard quality inspection equipments, such as: 50 times projectors, microscopes, a high degree of instrument rules, and a rigorous quality assurance program. Product design Bostec use professional software such as Pro-Engineer, Solidworks, AutoCad and UG etc. Customers can provide the 2D or 3D drawings in DXF, DWG format, and our professional engineers will offer the mould layout for customers’ further discussion within the short period of time. Quality Management Bostec is determined to improve productivity and focus continuously on innovation and up-gradation of its products and people. We are always customer orientated, and we specialize in quality assurance for this purpose, to ensure that products meet the most durable, high-quality levels, and the pursuit of overall customer satisfaction is our aim. Our values Bostec is founded on integrity and honesty in business. We value our customer as business partners and as a result, most of our customers are long term partners. While the mould and tool industry is a competitive and at times exploitative area, we here at Bostec are concerned with your well-being as much as our own, we strive to consistently provide only the highest possible quality products, at competitive prices and with perfect services. Bostec is sincerely seeking for cooperation opportunities to get a win-win situation.
    > Read more
Limit search by:
Region
Technologies
Materials
Company data
Industries
Certifications