4110 Suppliers found
List
Raster
Map
Sorted by 

    Watch

    Trico AG

    The TRICO AG - A small business, which is characterized by quality and flexibility. For Präzisionsdrehteile of all kinds, the TRICO AG is the right partner. We process various materials of up to Ø1.0mm Ø34.0mm.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1984
    Certifications
    ISO 9001:2015

    Watch

    CGS S.r.l.

    CGS Srl is born as artisan company at the end of the sixties to assume, more and more, in the years a real industrial structure; currently it occupies an area of 1500 square meters where work about twenty employees. CGS manufactures a wide range of products including precision components and small parts, drawing fittings for the earthmoving industry, agricultural machinery and oleodynamic systems, as well as components ready for a wide range of industries; They complete the range of transmission organs such as angle heads and jacks and magnetic devices, solenoids and rigators. Thanks to decades of experience and the sensibility and attention for the demands of the clients, CGS Srl is able to offer personalized solutions and high quality by ensuring advice and assistance in the phase of pre-sale until delivery. The technological adjustment and the continuous search of operation models more and more to the state-of-the-art allow CGS to propose to the own clients efficient and effective solutions both beginning from the particulars present in catalog and beginning from the sketches and from the specific applications of the clients. This approach based on the support to the client and aimed to the flexibility allows CGS to affirm its own presence on the Italian and European market more and more. Turning, finishing and treatments CGS is equipped with two production units that perform all the necessary turning operations, organizing overlapping production to ensure a total daily production capacity of approximately 60,000 hours on 17 turning centers. CGS Srl is able to realize precision components with diameter between 3 and 70 mm; the worked materials embrace the whole range of the automatic steels,from reclamation, cementation and good part of the stainless further to brass, aluminium, bronze, copper and plastic materials. Finishing works CGS also has a specialized department in the following stages of finishing: - Reaming, Tumbling, Milling with No 2 vertical machining centers, Lapping, Countersink, Deburring, Surface rolling, Assembling with the possible management of commercial components or supplied by the customer, Micropunting Marking. Grinding processes The department designated about grinding works performs the following manufacturings: - Centerless and Plunge grinding with tolerance of 3-5 microns and roundness of 50% tolerance - Grinding on centers, surfaces, centerless and superfinishings where tolerances are outside of what we can obtain internally. CGS guarantees accurate control of the quality of the works implemented, and therefore of the finished detail delivered to the customer. Washing the parts with ultrasonic and vacuum technology - For all the details that need to treated, they are washed at the CGS production department, before starting the external treatment required to obtain the best result in terms of quality and efficacy of the treatment itself; - All untreated ferrous items are delivered after a suitable washing phase during which a protective substance is applied, with a guaranteed 3-month standard length, which can be extended on request.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2008
    Certifications
    ISO 9001:2015

    Watch

    WKK Kaltbrunn AG

    WKK Kaltbrunn AG - enormously in form The beginning of the WKK Brunn AG is founded in 1967. As a dedicated tooling the company had at that time only one purpose: the production of cutting, bending and forming tools. Shortly thereafter, the fabrication shop was put into operation and some ten years later, the company introduced her first own product. By continuity, innovation and perfection was out of the formerly peaceful Toolmaking a successful SME with about 45 employees.Today, the CHP is an international punching operation with most modern manufacturing methods in the supplier sector. enormously complete - from the first idea to the final series, we offer comprehensive services - Consulting: individual and professional, on-site or at our - Construction: in-house with 3D Autodesk Inventor - Prototyping: short to illustrate your ideas - Tool: for punching tool and teaching building, with modern machinery - Series production: stamping products of all types up to 250 tons of pressure and up to 300 mm width at 3 mm thickness (up to 5 mm after consultation) made of steel, stainless steel, non-ferrous and light metals - Component manufacture: Total manufacturer of your products, automated assembly - Post-Processing: Heat and surface treatments for partners near - Finish machining: by machining (milling, turning, drilling), eroding and vibratory finishing - Did you know? Also welding
    > Read more
    Employees
    20 - 50
    Year of foundation
    1967
    Certifications
    ISO 9001:2015

    Watch

    TASKIRAN MAKINE IMALAT SAN. TIC. LT...

    TAŞKIRAN MAKINE was started its production in 2009 with the aim of making machinery. We are working with 8 machines in closed 400 m working area in 2018. By 9-member staff is innovative and customer-focused. The principle of working is innovative and development oriented in the machine sector
    > Read more
    Employees
    10 - 20
    Year of foundation
    2009
    Certifications
    ISO 9001:2015

    Watch

    LSK Stanz- und Presswerk Lindner GmbH

    LSK Lindner manufactures stamped / bent parts and sheet metal components. In the field of metal forming, we accompany our customers from the first idea through project planning and engineering, construction and tool making, prototypes and initial sampling to series production and spare parts supply. In addition to punching / bending technology, CNC sheet metal processing (laser cutting, nibbling and bending) and welding techniques (with robots and manually) are used in production, depending on individual requirements.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1957
    Certifications
    ISO 9001:2015

    Watch

    ABP - Innovative Blechbearbeitung GmbH

    The company ABP - Innovative Sheet Metal Processing GmbH sets with the help of modern machinery and well-trained staff, new benchmarks in central Germany and consider writing. Why we? The site Schopsdorf is a well-situated location directly on the A2 motorway. Schopsdorf located in Saxony - Anhalt at the border with the state of Brandenburg. Galvanizer and powder coater located in the immediate neighborhood. Transport distances are short and thus favorable. ABP sees itself not only as a producer but also as a service provider. We are an advisory tätig, develop individual Kundenlösungen and rely on the latest technologies. We are offering the entire process chain of sheet metal processing in the position to offer our customers. Here, we also rely on strong partners from the immediate region. The mixture of our Fertigungsmöglichkeiten with consistently innovative thinking makes your advantage. -Quality product, flexibility and individuality imprinting our mission statement. We are your partner for their products. We offer: - Laser cutting 2D - Laser - tube processing - Bending / folding - Laser Welding - Robot welding - MIG / TIG welding - Processing in the wage - Assembly production - Individual solution finding
    > Read more
    Employees
    50 - 100
    Year of foundation
    2013
    Certifications
    ISO 9001:2015

    Watch

    Eurich & Scheller GmbH

    The company EURICH & SCHELLER GmbH, based in Bornheim / Rhein-Sieg-Kreis, was founded by Wilhelm Eurich and Alexander Scheller. The focus of the service and product portfolio is the development, design and manufacture of electronics and metal housings. Our own production area enables us to produce prototypes on the basis of a product idea in a very short time. In the field of contract manufacturing, we are happy to support you with our manufacturing capacities. We are equipped with the most modern CNC machines from Trumph (edging) and DATRON (milling). Riveting, pressing and assembly are also part of our range of services. ESD work tables are available for equipping assemblies. When it comes to the development of mobile environmental enclosures and EMC protection is also an issue, then you've come to the right place. Perhaps we already have a ready-made housing concept for you in the 19 "or embedded area ?! Please do not hesitate to contact us!
    > Read more
    Employees
    < 5
    Year of foundation
    2018
    Certifications

    Watch

    Harres Metall design GmbH

    > Read more
    Employees
    100 - 200
    Year of foundation
    2008
    Certifications
    ISO 9001:2015

    Watch

    Eszter Kft.

    Eszter Bt has been working since 1993 with 30 employees. Our basic profile is spare parts production, besides, the company deals with automation and production of the target machines. Today this is our main profile. At 3 and 4-axis machining centers we manufacture individual item and small series spare parts. We have CAM system. Our 2 machining centers are suitable for milling 3D surfaces at high speed. We have CNC lathes for uncomplicated spare parts production, in the next year we will procure a high precision lathe.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1993
    Certifications

    Watch

    Inoxdea Srl

    INOXDEA is a young family business based in Erbusco (BS), Northern Italy, with a twenty-year experience in stainless steel processing. Ever since its foundation, InoxDea has specialized in products and services destined to the food industry, such as contract manufacturing of machinery and spare parts for sealers, packaging machines and fillers, as well as for the gastronomic, the confectionary and the tinned food industries. INOXDEA can also assemble and deliver preassembled small groups or sub-groups of machines and implants. Our headquarter covers a surface of 3000 m2, thereof 200 m2 occupied by our offices, and has 1750 m2 dedicated to our manufacturing sites. We constantly improving of our production and delivery process, in order to assist our customers in every phase of the production and craft high-quality products. We are equipped for the following realizations according to customers’ requests and designs Steel Processing: • Cutting • Pipe Cutting • Bending / Clinching • WIG und MIG Welding Finishing: • 2B-Sheet • Satined – Scotch–Brite We dedicate our undivided attention to the details of the final product and to our customers’ satisfaction. Thanks to our machine park we are able to realize steel sheets according to Your indications and guarantee the perfect quality. Thanks to our just-in-time (Kanban) principle we are able to minimise the stocking time, guarantee a fast delivery, optimise the production process and consequently reduce the waste. By means of suitable softwares, our quality management and technical office can assist, test and scrupulously follow every product in every phase of the production. REALIZATIONS • Tubular Structures • Filling Funnel/Funnel • Filler • Sealing Machines • Stainless Steel and Scotch Brite Cooling Troughs • Vacuum Pipe Collector • Framing for Multihead Weighers • Electrical Enclosures • Platforms SERVICES • Laser Cutting • Laser Pipe Cutting • Plate Bending • Assembly of P.V.C.- Pipes with relative equipment Our motivated Team works two turns therefore can realize the products with reliability and precision for Our international customers. We are eager to examine Your own projects or models and to submit a concrete offer. In case You need further information or clarification, please do not hesitate to contact us.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2002
    Certifications

    Watch

    Bileske GmbH

    We are manufacturing service providers for precision parts in the field of machining technology, as well as the related services. On-time delivery and compliance with the cost factor are a matter of course for us. Our customers, who have been completely satisfied for years, also trust in this. Individual and prototype or serial parts made of any material can be manufactured using modern technology according to customer requirements. Our goal is always to implement projects with the customer quickly, precisely and efficiently. A constant expansion of the machine park and the cooperation with the cooperation partners guarantee mass-blown solutions for the individual requirements of the customer. What can we do for you? We will be happy to make you an offer!
    > Read more
    Employees
    20 - 50
    Year of foundation
    2022
    Certifications
    ISO 9001:2015

    Watch

    Simplastic

    Simplastic is a Portuguese thermoplastic injection company, that supplies a service going from design and development to assembly, including supply chain management. We produce semi and finished products with metallic, electric and electronic components, providing time proven integrated solutions. We have 45 years of experience producing for and working closely with clients in several sectors, such as household appliances, electronics, lighting systems, robotics, agriculture, etc.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1977
    Certifications
    ISO 9001:2015

    Watch

    Polyvite AG

    We are a Kuststoffspritzguss company and process all commercially available thermoplastics. We also have a facility to offer LSR silicone injection molding.
    > Read more
    Employees
    5 - 10
    Year of foundation
    1956
    Certifications
    ISO 9001:2015

    Watch

    Monocraft Privet Limited

    Monocraft private limited is engaged in manufacturing and supply of a wide range of forging and precision machined components globally. Majorly we deal with Stainless steel, Carbon steel, Mild steel, Low carbon steels, Alloy steels, Aluminium and Brass. On top of that we are always happy to serve custom made solutions on the bases of each need in particular clients. Our capable workforce is complimented by a state of art infrastructure. We have forging, machining, Measurement and Quality management facilities to test our products on well defined quality parameters. In order to keep up with the growing demand we expand our capabilities to various Industrial sectors like Automotive, Railway, Defence, Aerospace, Heavy engineering, Earth Moving, Gear and Transmission, Agriculture, Marine, Electric transmission, and Industrial machinery equipment. Monocraft private limited and Monocraft forge is a development partner manufacturing unit. We provide custom made solutions in a cost effective manner. Our quality standards have made us an ISO 9001:2015 TÜV RheinAland certified organisation. Monocraft Private Limited has a sister concern company namely Monocraft Forge, This company is dedicated for the forging work and it has owning by a single owner who govern the Monocraft Private Limited.
    > Read more

    Watch

    M.D.M. srl

    M.D.M. was founded in 1996 operating in the automatic turning sector. In 2001, adapting to market requirements, it settled in its current headquarters in Bastia di Rovolon, completely renovating its machine park to dedicate itself exclusively to C.N.C. technology, specifically 3/4/5 axis turning and milling. A metrology room is also set up which, equipped with the most modern measuring technology, guarantees the quality of the finished product. M.D.M. is therefore able to provide a certification of conformity of the machinings performed for those Companies that require the Free-Pass delivery system. MDM also makes use of a Cad-Cam station, to design and draw any detail according to the specific needs of each customer. Our ambition is always to give the maximum professionalism, to give life to your ideas.
    > Read more
    Employees
    5 - 10
    Year of foundation
    1996
    Certifications

    Watch

    Arcobaleno Srl

    Arcobaleno Srl is a sheet metal proceeding company that works carbon steel up to 25 mm, stainless steel and aluminium up to 20 mm, brass up to 8 mm and copper up to 6 mm. It has a laser cutting department: 1 mitsubishi fiber ml3015ex-f80 8000w, 1 mitsubishi fiber ml3015gx 8000w and 1 trumpf fiber bright line 5040 8000w. Working range 1500x3000 and 2000x4000. It is equipped with combined laser punching machines: 2 finn power lpe5 with automatic loading and unloading It has a combined shear punching machine and an Amada Aries punching machine. It has an automated bending department: 2 Ras multibend bending machines with automatic loading and unloading system, 1 RAs XLT Bend and 2 Amada robotic bending cells. It has a manual bending service with 35 press brakes with a maximum reach of 4000 mm. It is equipped with the tig, Mig welding machine and electric punching. it supplies the assembled material, the assembly of inserts, rivets, studs, bushings and pins. it can supply painted, galvanized, screen-printed or with different finishes It is certified ISO 9001:2015. its strengths are quickness, quality and competitiveness
    > Read more
    Employees
    50 - 100
    Year of foundation
    1987
    Certifications
    ISO 9001:2015

    Watch

    Ernst Reiner GmbH & Co. KG

    PEOPLE WITH EXPERTISE AND EXPERIENCE As a customer, you benefit from our generation-spanning experience and high quality awareness our specialists, which they continuously pass on in the company and in training. When it comes to tightest tolerances, complex geometries and demanding surfaces, REINER is your contact partner. ZINC DIE-CASTING With zinc, extremely filigree or thin-walled, technically high-quality parts can be cast and a very high degree of accuracy is achieved. In addition, zinc die-casting guarantees high productivity even with small quantities and, thanks to its durability, is a very interesting economic process. At our location in Furtwangen, zinc die-cast parts with a part weight of up to 700 grams cast in die casting machines with a clamping force of 5 to 125 tons. With a maximum clamping area of 400 x 600 millimetres, we cast the alloy Z410. MIM - Metal Injection Moulding In series production, MIM opens up completely new technical possibilities - right up to highly complex geometries and always with optimised cost-effectiveness. Cross holes, internal and external threads, gear teeth and surface structures are easily integrated into the component by MIM. The process combines the freedom of plastic injection moulding with the properties of metals. At REINER, a selection of low-alloy and stainless steels is used here. PRECISION CUTTING with forming technology In the field of precision stamping and forming technology REINER offers a range of processes and technologies for high-precision stamped and bent parts. Fine punching, hydraulic bending processes, NC punching or NC bending are as much a part of this as laser cutting. ASSEMBLY SERVICES Thanks to our expertise and range of services as a specialist component manufacturer, we can also process complete assemblies, partially assembled assemblies, components, system assemblies and assembled individual components for you. A unique selling point of REINER in component assembly is the vertical range of manufacture, which starts with the sketch plan if required. In the in-house development center, engineers are available at CAD stations to work out plans and transfer them seamlessly into the production of the components. TOOLBUILDING We are your partner for mould making, precision stamping tools and devices. The equipment: - CAD / CAM for design and production - sink and wire eroding - Surface, profile and jig grinding - Most modern CNC programming technology - HSC milling - Coordinate measuring technology for form and pattern measurement - Centres for machining - Services from the design to the finished component. In addition to the design and manufacture of tools and devices, we carry out maintenance and repairs ourselves.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1913
    Certifications
    ISO 9001:2015

    Watch

    Kleysenz Technology(Shanghai) Co.,Ltd

    Kleysenz Technology(Shanghai) Co., Ltd. is a professional mechanical OEM (original equipment manufacturing) and ODM (original design and manufacturing) service provider, dedicated to providing industrial design, engineering and manufacturing services for metals and plastics. Our low-cost production capacity is located in low-cost areas such as China, which enables us to provide customers with competitive manufacturing costs. You can also achieve more convenient communication and product delivery through our long-term partner, GENOV Internationaler Handel GmbH in plankstadt, Germany. Kleysenz Shanghai development teams work with customers to ensure that their dreams come true and that their products are of the best quality. Kleysenz Shanghai has a first-class development team that provides unprecedented service and support. We have many factories in China. We can produce all kinds of parts and components for our customers according to DIN ISO and international quality standards. Machinery manufacturing Equipment industry Electrical industry Automobile industry Health industry Our customers are mainly from Germany. With our wide range of products, we can provide you with the best quality single parts, component groups and finished products at the most favorable price. In addition, we offer you the possibility to significantly reduce product costs and improve competitive opportunities. We are happy to create a free and uncommitted offer for you Kleysenz Shanghai - your reliable partner for manufacturing and purchasing in China !
    > Read more
    Employees
    20 - 50
    Year of foundation
    6
    Certifications
    ISO 9001:2015

    Watch

    Gablenz Guss GmbH

    Since 1947, we produce for our customers and maybe soon for you high quality castings. By using the latest technologies and know-how, we face the greatest challenges of our customers and we can therefore claim on today's performance-oriented market as a medium-sized company. We offer: - Casting - Hand molding - Gravity die casting - Machine molding (sand casting) - Model - ....
    > Read more
    Employees
    20 - 50
    Year of foundation
    1947
    Certifications
    ISO 9001:2008

    Watch

    Net-Components GmbH

    Net-Components GmbH was founded in 2003 by Mr. Dipl.-Ing. Tarkan Peker after many years of experience in drive engineering and transmissions manufacturing. Net-Components is certified with DIN EN ISO 9001:2008. We always aspire toward market driven and customer oriented solutions by means of our acquirements on international market and goal oriented method of working. We are responsive to requests of our customers and always systematically develop new solutions, which are the reason why our market share continuously increase. The development of complicated tasks in mass production, medium and small-series production, prototype construction, to made-to-order production takes place at modern machining centres which assure consistent quality and flexibility according to wishes of customers. We are able to deal with short term as well as long term capital investments toward order situation, therefore we ensure a smooth production in terms of quality, date and cost. To manufacture our products according to safety and environmental friendly operations and to meet the high quality requirements belong to our company’s policy. We strive to lead our customers to better competitive position with continuing advancement and cost effective production. We always aim and attach great importance to education and training of our personnel. They act quality conscious and have an impact on continuing advancement. This is the right place for you, if youare looking for a competent partner in the field of drive technology. As a certified company, we are specialized in the production of turning- and milling parts, casting- and forging parts, laser- andsheet metal parts as well asspecialproductions completeour product range since 2003. With our expertise, we are able to support you during the development phase. Highly motivated, well-qualified staff and most modern production equipments are the basis of our success.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2003
    Certifications
    ISO 9001:2015

    Watch

    CNC Zerspanungstechnik Hölle GbR

    We are suppliers to industry in all industries. Our focus is on the machining of filigree turned parts.
    > Read more
    Employees
    < 5
    Year of foundation
    2017
    Certifications

    Watch

    Ansla Science Technology Co., Limited

    Ansla was found as we want to make better quality goods and services for customer, we have very professional team and precision production & inspection equipment. All of stuffs have over 10years in the metal and plastic product field, They are dedicated and passionate, can provide professional products, manufacturing services, and can quickly respond to any guest's problems….
    > Read more
    Employees
    50 - 100
    Year of foundation
    2019
    Certifications
    IATF 16949:2016

    Watch

    Sirius Maribor d.o.o.

    The family company with a lot of passion for precision, quality and customer satisfaction. Sirius Maribor d. o. o. (Limited Liability Company) was founded and registered in the District Court of Maribor on October 30 2003. When founded, Sirius Maribor employed 20 workers who produced equipment and technological functional units intended to customers in Austria, as well as in Slovenia (approximately 10 %). The number of employees has risen to 70 due to encouraging work results and increasing demand for our products.
    > Read more
    Employees
    100 - 200
    Year of foundation
    2003
    Certifications
    DIN EN 1090

    Watch

    PREFAG Carl Rivoir GmbH & Co. KG

    PREFAG has been located in Walzbachtal for more than 65 years. We are a strong partner as a supplier in sectors such as industry, medicine, aviation and automotive. Our qualified expert team actively supports customers and suppliers in the development of new components and assemblies. The complex and miniaturized turned parts up to ø30 mm are our core competence. We have innovative strategies and a high level of vertical integration in the manufacture of short and long turned parts - including further processing, eg heat and surface treatments.
    > Read more
    Employees
    200 - 500
    Year of foundation
    1954
    Certifications
    ISO 9001:2015

    Watch

    Plastium GmbH

    > Read more
    Employees
    50 - 100
    Year of foundation
    2019
    Certifications
    ISO 9001:2015

    Watch

    IMV Reinhardt

    We have specialized in the production of individual parts and small to medium series in a wide variety of areas. No matter whether small or large companies, we manufacture according to plans and wishes of our customers and deliver versatile products with maximum precision and flexibility. Current controls and programming systems characterize our know-how.
    > Read more
    Employees
    5 - 10
    Year of foundation
    2016
    Certifications

    Watch

    CADYOU

    CADYOU Development and Construction was founded in 2008 and is successfully active in the construction and manufacture of special machines and devices. (CATIA, SolidWorks, Inventor) Contract manufacturing of individual parts and assemblies is a very important part of our company. The very motivated and highly experienced designers plan and construct their sophisticated special machines and systems. You get everything from a single source! Equipment and devices are designed and manufactured by us! We have welding workstations and are able to offer processed welded assemblies. we have 4-axis machines and can therefore manufacture complex parts. Our business model allows us to offer you very sophisticated solutions at very low cost. ask us! You will immediately receive a non-binding offer. We look forward to cooperation.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2008
    Certifications
    ISO 9001:2015

    Watch

    Forma Metall GmbH&CO. KG

    Precision in metal FormaMetall is your partner in plant, device and apparatus construction. Our customers come from the energy, chemical, automotive, mining and mechanical engineering industries and rely on partners with in-depth industry know-how. We offer a high degree of flexibility so that even individually manufactured solutions can be implemented within a short period of time. This at a consistently high level - both technically and in terms of craftsmanship. FormaMetall leaves nothing to chance and creates the ideal basis for successful projects with a qualified team and modern technology. For more than 20 years, we have been producing sophisticated components made of structural steels, stainless steel, special materials and non-ferrous metals for national and international customers. Are you looking for an experienced, reliable partner? Take advantage of our competence and experience in sheet metal processing, welding technology, pipeline construction, as well as custom-made products in individual parts and series. Since 2019 we can also offer you components or functional prototypes in 3D print production. Our material selection includes plastics and metal materials. The plastics sector, for example, offers extremely high strength levels that are higher than that of aluminum. Thanks to the wide selection, almost any design concept can be implemented.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1996
    Certifications
    DIN EN 1090

    Watch

    Saar-Metallwerke GmbH

    The Saar Metall Group Reliable, individual, economical: We are specialists in the processing of copper, copper and aluminum alloys and selected steel materials. We forge and comprehensively master the mechanical further processing. You get everything from a single source - this saves you time and your project is completed quickly. All of our companies within the Saar-Metall Group offer you the same excellent manufacturing standard. In many of our areas, we are among the technological market leaders worldwide. Individual collaboration We accompany you in your project from the inquiry through the various production stages to commissioning. We either develop a new individual solution together with you or we optimize your suggestions. We can also bring components in existing systems up to date from an economic and production point of view. Broad industry expertise Our field-tested solutions help our customers to work efficiently in numerous industries.For example in the steel or automotive industry. We can certainly contribute our know-how to your industry. Long-term cooperation We attach great importance to a continuous and trusting cooperation with our customers. This includes being able to work with the same contact persons at the Saar-Metall Group for many years. The better we know your business, the better we can support you. And that makes it all the easier for you. Traditionally good. What we can do, we have been very good at for a long time. Saar-Metallwerke has been supplying the iron and steel industry in Saarland, Lorraine and Luxembourg since 1925. Today, the Saar-Metall Group comprises three operational companies at production sites in Germany and France.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1925
    Certifications
    IATF 16949:2016

    Watch

    KleRo GmbH Roboterautomation

    You would like to make metallic components additive? Are you interested in the possibilities of this technology? With the additive manufacturing of 3D-printing metal (SLM, Laser-cusing®, DMLS etc.) we offer you a production technology that is no longer used only in prototype production. This process offers completely new possibilities where conventional processes such as laser cutting, turning or milling reach their limits. This is a process that is used exclusively for the production of metal. As with 3D printing, the components are built up by layer-by-layer build-up and fusion of metal powder; the component has almost identical mechanical properties to the original material. You need support in implementing your automation project? Then you are exactly right with us! We realize complete manufacturing cells according to your idea. From the feasibility study on the construction and assembly to commissioning and on-site support, we are the right partner for your project. In particular, we cover the following areas of responsibility: - Project Management - Programming - 3D printing metal (additive manufacturing) - Security management - 3D scanning - Milling technology - Construction - Assembly - Hose packages - Service - Training Our 3D metal printing services at a glance: - construction work (cooling ducts, component optimization, etc.) - Checking the cooling channel design (flow simulation, thermal images, flow analyzes) - coatings - Plastic prototypes - Component measurement - Creation of plastic models - 3D scanning / reverse engineering - fine machining (milling, grinding, eroding etc.) - Surface treatment (anodizing, electropolishing, etc.) - hardening - welding
    > Read more
    Employees
    20 - 50
    Year of foundation
    Certifications