9539 Suppliers found
List
Raster
Map
Sorted by 
Go to watch list 0

    Watch

    Bodycote Wärmebehandlung GmbH

    The vital link Operating an international network of facilities and serving a wide range of industries including aerospace, defence, automotive, power generation, oil & gas, construction, machine building, medical and transportation, Bodycote is the world’s largest and most respected provider of thermal processing services. These services are a vital part of any manufacturing process and include: - Heat Treatments - Metal Joining - Hot Isostatic Pressing - Metallic, Ceramic, Cermet and Organic Coatings Thermal processing is a vital part of any manufacturing process and includes a variety of techniques and specialist engineering processes which improve the properties of metals and alloys and extend the life of components. Without heat treatment aircraft engines would not last a single flight and car gearboxes might only last a week – if you were lucky. Without hot isostatic pressing the risk of catastrophic breakdown of metal components would be far greater and the carbon footprint of power stations would be dramatically higher. Without coatings, construction fixings would rust away and thousands of everyday objects would quickly lose their shine. Peace of mind for manufacturers for over 30 years We never forget that our customers have invested time, money and resources in all the components we process, which is why quality comes as a standard part of our service, ensuring that all our customers’ components are treated with care throughout. Our facilities hold numerous international, national and customer approvals appropriate to the services they offer and the markets they serve. Bodycote’s quality management systems, validated by major engineering OEM’s, have been developed to meet the requirements of both ISO 9001 and environmental standard ISO 14001. Additionally, market-related standards such as AS 9100 for aerospace and TS 16949 for automotive have also been incorporated. Bodycote has also gained the prestigious Nadcap accreditation at a large number of locations throughout Europe and the USA, as well as approvals from major aerospace companies and their supply chains. Additionally, our transport services are linked with process and production controls to deliver optimum logistics solutions for supply chain customers. Our customers can be confident their demands can be met, however stringent, with assured quality, cost-effectiveness and on-time completion every time.
    > Read more
    Employees
    500 - 1000
    Year of foundation
    1923
    Certifications
    ISO 9001:2008

    Watch

    Beck Metall GmbH

    The company Beck Metal has over 50 years of expert partner in forming and welding technology. In two plants in Schwäbisch Gmünd were expanded in 1985 and 1995, the entire production is to assembly and packaging. All of our 50 employees make through your experience and qualifications for a smooth production process that protects our high quality standards and continuously improved. We support already in the design to ensure the best and most optimal manufacturing process for your parts. Flexibility and continuous improvement in our fixture and tool guarantee you fast and high production efficiency. Machining Our CNC-controlled machinery allows us also small series in all types of machining inexpensive to manufacture. - Tool: The stock of tools which are produced in our own tool, shows most clearly our experience and the trust of our customers. It is a piece of valuable capital that we treat them with care. - Mounting and Shipping: As a system supplier, it goes without saying that we machined surface all items produced, assembled and packaged to offer. Our own fleet provides you with the parts on the agreed date.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1972
    Certifications
    DIN 18800-7:20

    Watch

    FRIES Kunststofftechnik GmbH

    We set standards Our core competencies: - Injection molding up to 1200 t - Extrusion blow 20 to 350 l - Own design department Production:Injection molding: We manufacture products with a part weight of 1.5 g to 4 kg. Our production go from 100 to 1200 tons clamping force. We process thermoplastic materials such as PP, PE, POM, ABS, PC, SAN, PMMA, etc. All facilities are equipped with the latest handling systems and subsequent storage tapes. • Extrusion blow molding: We manufacture products with a part weight of 0.25 kg to 18 kg. Our range of machines ranging from 20 to 90 t Zuhalterkraft. We process thermoplastic materials such as PP, PE. Product range: Fries Rack System - Washing racks for commercial dishwashers - Glass racks, dish baskets for storing, transporting and rinsing And cutlery baskets for kitchens, caterers, catering -Event organizer - Baskets for cleaning industrial parts manufacturing More information on: www.fries-rack.com Technical molded parts - For various industrial applications such as tanks, road building, construction and civil engineering - Technical container - Automotive industry - Technical plastic products - Surface design such as screen printing, IML (In Mould Labeling), embossing Packaging - Buckets, jerry cans, barrels - Dangerous goods packaging - Packaging according to customer specifications Garden - Watering Cans (Fries kettle) and garden shade base We assist you with your specific problem solving with expert advice, a detailed quotation of tools and articles from the development phase, prototyping to series production. Qualified staff, structured processes and the use of quality management are the building blocks of a consistent quality. In a detailed article clarification with the customer in advance, we pay great attention to keep running costs as low as possible. Production facility: located in the west of Austria, about 25 km south of Lake Constance, about 1 hour from Zurich, under 2 hours from Munich. Many customers in southern Germany and Switzerland.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1895
    Certifications
    ISO 9001:2008

    Watch

    Zerspanungstechnik und Metallbau Ge...

    We are a medium sized mechanical engineering company. We structure in the areas of turning, milling, welding, pressing, stamping and assembling of complete assemblies. With years of experience in these areas we process the different materials. Furthermore, we work with various partners (grinding, surface finishing, grooving, etc.). So we are to fully comply with many customer requests in a position. Manufacturing rotary, rotary-milled parts diameter 5-200mm Motageleistung up to 25kg total weight Materials-all ways Surfaces - all options short delivery time (rolling week) TÜV-Umstempelgenehmigung
    > Read more
    Employees
    10 - 20
    Year of foundation
    2002
    Certifications
    ISO 9001:2008

    Watch

    TEPRO Präzisionstechnik GmbH

    THE COMPANY The company TEPRO Precision Technology GmbH has been producing for over 25 years and stands for quality, flexibility and versatility when it comes to the treatment and processing of steel, stainless steel, aluminum and other materials. Our customers appreciate the high quality of our work, our response times for product changes and general deliveries as well as the versatility of our range of services. CUSTOMER TESTIMONIALS + PRESENCE Consistent project organization and systematic way of working provide transparency and information value safe in every phase of a project. The use of modern working methods and techniques as well as continuous professional development of all our employees is a matter of course for us. Despite high specialization we speak the language of our clients and project partners. LASER CUTTING - PLATES The technology of modern systems is becoming increasingly complex and places high demands on a comprehensive understanding of the system. Solutions are needed that integrate components from complex manufacturing processes. Our comprehensive understanding of the system we have provided in a variety of projects to demonstrate, with which the background experience and the professional profile of our employees share. For the production of medium and large series, we have laser systems is synchronous two parts can be finished simultaneously. Also a wide variety of moldings can be edited on our machines. In our warehouse continuously located our standard materials such as steel, stainless steel and aluminum in the form of plates and cold-rolled strip bars in various sizes and thicknesses. LASER CUTTING - PIPES Laser cutting of round and rectangular tubes as well as the process of various Profielen has always been an integral part of our vertical integration. Our Bystronic laser system has an integrated rotary axis. With these conditions, we can deal with complex contours and various breakthroughs with only one setup.With rectangular tubes, it is possible to cut us contours of the corners. MACHINING Our extensive editing options and the powerful machinery create space for your disposition. In your planning, we are on your side and work rationalization potential for your products to strengthen your market position. We offer all the possibilities of mechanical processing and stand for reliability at the highest quality level: - Drilling - Deburring - Tapping - Vibratory Finishing - Rub - Roller straightening - Lower Working closely with qualified and capable partner companies we can offer through our range of production services in addition all mechanical and other fields. - Turning - Milling - Glow - Hardening - Surface finishing - Grinding - Sand and glass bead blasting BENDING With our press brakes complex components are brought up to a partial length of 2100 mm in the form of 3-point bending technique.Our experienced staff guarantee the highest precision through continuous training. With this know-how, we also want to bring your products high-end in the form. VERBINDUNGSTECHNIK With our large vertical integration, we are able to add your demanding products from a single source and to weld. This range of welding processes are applied. Depending on the material, geometry, and application are available to us for this purpose the following procedures. - Welding MIG-MAG - TIG welding (including aluminum) - Come up the ...
    > Read more
    Employees
    20 - 50
    Year of foundation
    1983
    Certifications
    ISO 9001:2015

    Watch

    Mattig Präzision GmbH

    We are a competent partner for turned parts that not everyone can make. When we speak of precision we mean tolerances in the μ range. Our machinery can we batches of 100p. to 50000Stk. optimal care. Up to Ø 65 we work from the bar and up to Ø 200 we process food / inserts.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1996
    Certifications
    ISO 9001:2008

    Watch

    Estanda Fundiciones, S.A.

    We are a Sand casting Steel Foundry. Our main activity is the cement industry and also security parts of the breaks for high speed railways and heavy truck industry. As you can find in detail on our web-site, we work with 2x 3tn and 2x 2tn induction furnaces. We dispose of two automatic melting lines, one by impact and one chemical moulding and of course the possibility of hand moulding. Different heat treatment furnaces, an integrated own machining shop and the possibility to subcontract many different additional operations complete our manufacturing program. As a reliable supplier, ESTANDA makes available to its customers the latest production, logistic and organisational means to underpin its commitment to supply on time and to guarantee the final quality product. It is a flexible, participatory organisation with highly qualified professionals who have broad industrial experience and who share the same values and hallmarks geared towards customer attention. A decisively international outlook guiding the presence of ESTANDA wherever its customers may be located has made it possible to reinforce ESTANDA´s positioning and competitiveness on the global market on which it operates. The current growth and future competitiveness of ESTANDA is based on the following: Values and experience of its human team. Ongoing innovation in processes, products and services. High technology and quality in manufacturing. Providing customers with support and service. International strategy. Social commitment towards the milieu.
    > Read more
    Employees
    200 - 500
    Year of foundation
    1953
    Certifications
    ISO 9001:2008

    Watch

    Hennig GmbH Stahl- u. Metallerzeugn...

    The "Hennig GmbH, steel and metal products" in Pfullendorf, Baden (20 km north of Lake Constance), is a technically modern equipped, qualified family-owned business in the industry. The company specializes in the "cutting and assembly of series, single parts and assemblies", and is a reliable partner for a number of nationally known companies and corporations. Mostly wrought and saw blank, Hennig manufactures components, which are used, among other things in the clamping means and commercial vehicles, as well as in textile machine or pump, engine and transmission technology.On a variety of visual and functional parts, this complex milling, drilling, turning and grinding processes with modern tools and machines are used. Reaches Process capability and ensures Hennig by a quality management system certified according to DIN ISO 9001:2000. Production methods: Flexibility through the manufacturing process in house as: Turning point turning, CNC turning, milling, 5-axis machining, drilling, Surface grinding, CNC grinding, cylindrical grinding, 3D Measurement Spaces, grooves evacuate, evacuate gears, bumping, marking, Sawing, cleaning, assembling, assembly of components, painting ... Product examples: • Range: VEHICLE INDUSTRY Clutch and transmission parts, magnetic body, anchor plates, Rotors, pulleys, drive shafts, deflection shafts, Hubs, wheel hubs, swing axles, engine components .. • Range: SPANNTECHNIK Base jaws, jaws block,
    > Read more
    Employees
    50 - 100
    Year of foundation
    1979
    Certifications
    ISO 9001:2008

    Watch

    Amberger Werkzeugbau GmbH

    The Amberger tooling GmbH is a family run business with a nearly 40-year tradition. Since 1971 the Amberger tooling GmbH is your competent partner when it comes to the development and manufacture of tools for sheet metal forming. Initially focused on the design and manufacturing of tools, has been expanded with the establishment of the Department of stamping technology in 1989, the process chain to the color matching in-house and series production. Today, more than 120 employees produce at the company headquarters in Sulzbach-Rosenberg in two plants to more than 7,000 m2 tools and stamped components for the medical, electrical and household appliances and the automotive industry
    > Read more
    Employees
    100 - 200
    Year of foundation
    1971
    Certifications
    ISO 9001:2008

    Watch

    AIZ gGmbH

    The life helping the disabled Zollernalb eV was founded in 1967 and employs today as "Foundation Zollernalb life" in its subsidiaries ZAW gGmbH, ISBA gGmbH, AIZ gGmbH over 550 people with a handicap. In cooperation with our clients from various industries, we have acquired expertise in many areas. At our four main locations in Zollernalbkreis, our successful partnership with both large companies, medium-sized as well as small companies, public administrations and consumers. Convince yourself of our range of services with an attractive price-performance ratio. You get good solutions for your requirements and therefore give the employees at our facilities a professional perspective. We would love to get in touch with you. We look forward to working in partnership. Areas of the AIZ gGmbH: Sheet metal working: Cutting, punching with a trump Laser-/Stanzanlage, a flatbed laser machines and two press brakes and bend sheets and tubes in various thicknesses and with high precision. As of mid-2013, we are reliable and accurate Customize with a robotic cell with the laser welding method capable of the highest quality products. - Processes: Plates / sheet metal parts from steel, stainless steel and aluminum, in various sizes and strengths, from simple sheet metal parts to sophisticated design with complex contours, laser, punching, tapping, welding, riveting, bending, bending, ... - Products: Medical instruments, parts of furniture, kitchen accessories, model airplanes, Railings, parts for sports equipment, beehive covers, ... Locksmith: In addition to our other metal departments, we finished in the locksmith special constructions, small series and pattern according to architects, designers and customer designs or for its own production and product development.High quality modular Locksmith products are made in factory construction. - Processes: Sawing, grinding, bending, deburring, welding, drilling, tapping, riveting, ... - Products: Steel, stainless steel and aluminum structures, canopies, patio canopies, glazing, balcony railings, French railings, gutters, signage, ...
    > Read more
    Employees
    20 - 50
    Year of foundation
    2009
    Certifications
    ISO 9001:2008

    Watch

    BMK Bodensee Metall AG

    The modern and efficient CNC machine park and highly qualified employees are the backbone of our mechanical production of precision parts. We process all standard engineering steels steels, tool and special steels and stainless materials. Furthermore, "can" we. In aluminum, ferrous metals and plastics We carry a private, well-stocked material warehouse. This allows us at any time to quickly access. In the spirit of complete delivery, we have a network of competent suppliers surface treatments and finishes, and can therefore provide the customer with ready-precision parts. The availability of various mechanical machining processes such as turning, drilling and milling we can also manufacture a wide variety of mechanical parts and the client assembled supply ready for installation as module. We are specialized in medium batch sizes with lead times up to four working days.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1975
    Certifications

    Watch

    Kaeser Umformtechnik GmbH

    YOUR PARTNER FOR PRECISION DEEP DRAW PARTS We are specialized in the production of high quality deep draw parts made out of a variety of materials in small and medium lots. Due to our competent team, modern facilities and production know-how we can realize challenging tasks maintaining very short response times. High precision and certified quality go without saying in our production process. This is how we develop creative solutions and longtime partnerships. OUR CORE COMPETENCE In the deep drawing process metal sheets are being transformed into hollow bodies of different base geometries through draw and pressure forces without shaving. Decisive for optimal process results are not only particular machines and tools, but also great experience and creativity. As an example, we manufacture parts with an extremely small outside radius of 0,5 mm. Processing stainless steel sheets into deep draw parts with a material thickness of 0.05 mm up to 3 mm is our core competence. The maximum depth of draw that can be achieved is 180 mm. Obviously, we also process all non-ferrous metals as well as special alloys. Fields of application and product examples: The components that we produce are for instance used as bodies for pressure and temperature sensors in systems engineering, as battery-cell-bodies for technical applications, screen-housings for electromagnetic radiation, for military and aerospace technology, in household utensils, load cells or in runways of cargo airplanes.
    > Read more
    Employees
    5 - 10
    Year of foundation
    1990
    Certifications
    ISO 9001:2008

    Watch

    HÄNI + CO. AG

    We produce with the most modern Machines for manufacturing pre-finished turned parts for customers in the automotive, electrical and medical (ISO / TS 16949, ISO 13485, ISO 14001). We process steel, nonferrous metals, aluminum, titanium and plastics, On ... lathes, single spindle, multiple spindle and rotary transfer machines, ... In diameters ranging from 1 to 42mm. For more information see www.hanitec.ch
    > Read more
    Employees
    100 - 200
    Year of foundation
    1939
    Certifications
    ISO 9001:2008

    Watch

    Dongying Kelin Precision Metal Co.,...

    Established in 2005, Dongying Kelin Precision Metal Co.,Ltd is an OEM manufacturer and exporter of custom-made industrial parts, by processes of Investment Casting, CNC Precision-machining and surface-treatment. With key emphasis on cost-and-quality control, Kelin successfully exports Over 93% of its products to the EU, North America, Australia, New Zealand and Japan etc. Typical products are Machinery Parts, Pipe Fittings, Pump &Valve Components, Lock Fittings in stainless steel, carbon steel, low alloy steel, heat-resistant steel etc. -1.4308,1.4408,1.4581,1.552,1.4859 -1.6781,1.4317,1.4405,1.4931 -1.0619 Upon requests, Kelin supplies not only raw castings, CNC finished parts but also products that require hand-polishing, electro-polishing, vibration-grinding, black oxidation, carburization, zinc-galvanizing, Chrome-Plating and heat-treatment etc. Kelin supply dimensional inspection, chemical composition analysis, mechanical property tests, non-destructive tests and metallographic inspections strictly in accordance with clients’standards. Kelin over the years has obtained and adopted the following certifications for its management practice and production systems: 1) ISO 9001 : 2008 certified by TUV Rheinland 2) PED 97/23/EC certified by TUV Rheinland 3) AD2000-W0 certified by TUV Rheinland The company constantly adapts its cost structure in order to provide cost-competitive products, without compromising quality. It is Kelin’s sincere wish to establish win-win cooperation with your distinguished company. Kelin Welcomes you to visit our factory premise. Please, drop us a message if you are interested. The company’s competent English-speaking and technically-sound staff are at your service.
    > Read more
    Employees
    200 - 500
    Year of foundation
    2005
    Certifications
    ISO 9001:2008

    Watch

    ORIENT RIDER CORPORATION LTD

    Orient Rider Corporation limited (hereinafter referred to as “ORC”) has always specialized in ferrous metal casting including grey iron casting, ductile iron casting and steel casting, non-ferrous casting including copper casting, aluminum casting, zinc casting, machining and stamping more than 20 years. Process technique: High pressure die casting, Sand casting including coated sand casting and resin sand casting, Gravity die casting, Investment casting and lost foam casting Our main competences are: - Casting (9) - Centrifugal casting - Continuous casting - Gravity die casting - Hand moulding (sand casting) - Investment casting - Low-pressure casting - Machine moulding (sand casting) - Pressure die casting
    > Read more
    Employees
    500 - 1000
    Year of foundation
    Certifications
    ISO 9001:2008

    Watch

    präzimat Feinmechanik GmbH

    The präzimat Precision Engineering GmbH is a modern and a traditional company with over 50 years experience in the manufacturing of precision turned and milled parts according to customer drawings. A pronounced zero defects culture, lean on value focused processes and Just In Time delivery concepts make the präzimat Precision Engineering GmbH to a powerful partner for demanding customers worldwide. Our quality management is certified according to DIN EN ISO 9001:2008. Our company is located near the world-famous watches Glashütte / Sa (8km) and in the immediate vicinity of the Saxon capital of Dresden (25km).
    > Read more
    Employees
    10 - 20
    Year of foundation
    1992
    Certifications
    ISO 9001:2008

    Watch

    nordform Max Storch GmbH & Co. KG

    The nordform Max Storch GmbH & Co. KG can look back on a long tradition in the processing of plastics. It is run by the fourth generation family business. Our over 60 years of experience in the processing of thermoplastics and our many years engaged, motivated and highly specialized employees contribute significantly to the success of our international business. In the processing of elastomers we can even draw on over 90 years of experience. Our customers - from small business companies to large group - we offer a mutually beneficial and reliable cooperation. We distinguish ourselves by comprehensive advice, superior service and high product quality. In new developments, we are gladly advise you. We will provide CAD solutions as construction aids and let directly benefit from our experience. In the areas of deformation and processing of thermoplastics, we are your competent partner. Our manufacturing on modern technical level using different processing and machining process allows us to offer you a flexibility to offer that satisfies even your most complex requirements. Our own tool ensures low friction losses and shortest times from idea to product. The 9001:2008 certified according to DIN EN ISO production of our company is to ensure consistently high product quality. Let us convince you of our services and our quality!
    > Read more
    Employees
    20 - 50
    Year of foundation
    1919
    Certifications
    ISO 9001:2008

    Watch

    AnVa Components

    AnVa Components supply high-tech steel products for the automotive and other engineering industries to a global market. Our technical expertise and andvanced machinery contribute to the streamlining of your company’s manufacturing, in fields ranging from standardization and design to machining, heat treatment, surface treatment and finishing. We have access to a unique cold forming technology that can enhance the strength of the material and minimizes waste of raw material in the subsequent machining processes. Our highly automated plant ensures effective material handling and a streamlined production flow. We have a lean oriented organization focused on customer value and over 30 years of experience from satisfying the requirements of the automotive industry.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1982
    Certifications
    ISO 9001:2008

    Watch

    TME Maschinenbau GmbH

    Since its inception in 1999 we have specialized in the manufacture of parts and series in the area of turning and milling, and are active throughout Europe. Regular investment in new technologies and manufacturing capabilities ensure optimal quality and customer satisfaction. Good Quality begins with a high-quality production equipment, efficient processes and a clear structure. Continuous development is the foundation of our success. We employ 35 employees in administration, construction and manufacturing. Join our 4 trainees for precision mechanics and in administration. The cooperation with TME is open, direct and uncomplicated. Our clients include companies in the areas of: Engineering, tooling, laser technology, and aerospace and automotive industries. Service overview Production / manufacture of components We manufacture parts, spare parts and small series to mass production according to your drawings or a pattern. Our machining capabilities include CNC-controlled milling, drilling, turning, wire EDM, surface grinding and conventional crafts and sheet metal processing. We can use our processing centers, parts machining, up to the size: L = about 2100, W= about 1000 B =, H = about 600 and up to a weight of 6500 lbs. Construction Design of tools, fixtures and equipment. 3D modeling for prototyping. Support for design tasks and advice on cost-effective and production-oriented manufacturing of your parts during development. CAD / CAM Acquisition and processing of all popular file formats such as : STEP, SAT, IGES, DWG and DXF programming with our CAM system. Welding / Heat treatment The welding of steel and heat treatment (hardening, tempering and annealing) are also of parts of the scope of our processing. Surface treatment Surface treatments, we can perform at our partner companies. Assembly Assembly of parts, components, tools and equipment. Reports On request, we create initial sample inspection reports and test protocols. Delivery We deliver your products on time with shipping or parcel service. We are a professional partner, trust TME!
    > Read more
    Employees
    20 - 50
    Year of foundation
    1999
    Certifications
    ISO 9001:2008

    Watch

    Richter Formteile GmbH

    Our company has now existed for about 30 years. The business grew particularly due to our customer focus, customer service, and fast response time Preisgüntigkeit We are now in a position to manufacture products in the countries where they process reliability and Can be produced inexpensively. In Eastern European countries, but preferably in Turkey. Again, this is due to tradition and in the aforementioned countries is shed for generations steel. Consequence, these countries are well equipped for machining cast steel. On the way committed by us has emerged over the past 30 years following philosophy: Each casting, forging or plastic part is made made in the best organizations capable country or continent on the most appropriate for this production facility delivered to the customer through a sophisticated logistics schedule through sensitive delivery modalities or Kanban deliveries be made from our warehouse Leonberg. The company Richter moldings GmbH produces precision casting products in Asia, especially India and China. Our production in the aforementioned countries is certified according to DIN ISO 9001 and TS 16949. We have the ability to provide all materials, such as steel and stainless steel alloys according to DIN, EN, ISO and ASTM. All materials are supplied processed either raw or finished. Our tolerances correspond to the VDG P 690 in the Tolerance levels D1, D2 and D3. Surfaces - RA and RZ subject to agreement with the customer. For the dashboard area, we have approvals After AD 2000 and TRD 100 Our testing facilities are not only the tensile strength, Yield strength or notch toughness, but also X-ray, 3D measuring and fluxing. Surface options are rays, electro-polishing, Browning, passivating, pickling or other galvanic treatments. We supply castings from 20 grams piece weight up to a maximum of 20 tons. Basically, we have the following options: In sand casting: Gray cast iron, ductile iron, cast steel, malleable iron, stainless steel casting, Cast aluminum, cast magnesium. In steel molds cast: Centrifugal casting, permanent mold casting, die casting All materials on the market are possible, including Special alloys, which we can shed on request. We supply small, medium as well as large series, where we for The particular amount of the optimal method and the optimal Place the router. In general, all surfaces are possible, galvanic, galvanized, blasted, electro-polished, primed, sanded, passivated, KTL-coated as well as painted. We test for the desired mechanical properties such as yield As well as the notched impact strength (3.1 certificate), which also chemical analysis contains. We galvanize Chrome 6-free and can certify this as well. All approvals (TÜV, Germanischer Lloyd etc.) Are possible. In our company, the forgings have tradition, for since the 80s and 90s we forged for Engine Manufacturer piston crowns. Today we operate in the following areas wrought: Drop forged Alloy structural steels Stainless steels Aluminum Carbon steels Forgings Alloy structural steels Stainless steels Carbon steels Machining of forgings CNC machining and conventional machining Mill Grind Boring Honing Threading Lapping Thus, it is important for our customers to know in advance an extensive process and material consulting with us. We supply raw components, machined components and machi...
    > Read more
    Employees
    10 - 20
    Year of foundation
    1988
    Certifications
    ISO 9001:2008

    Watch

    Kölbl GmbH

    We are a family business with over 40 professionals from the fields of precision engineering and toolmaking. Since 1975 we manufacture the most modern machinery single and series parts to complete, ready for installation, mechanical assemblies. On our machines, we process all machinable materials. Turning up to 200 mm diameter and a length up to 250 mm. Milling to a side length of 500 mm.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1995
    Certifications
    ISO 9001:2008

    Watch

    SCHIPO AG Mechanische Werkstatt

    To our customers we always offer high quality products. The On-time delivery. Through optimal processes and use of technology we are always striving cost and cost-conscious to produce. We actively protect the environment in each product. Be used oils, Altemulsionen and other residues collected and recycled separately. We always have satisfied customers of the offer to product delivery. NEW PRODUCTION IN CROATIA -------------- FOR SERIES 1000 STK.
    > Read more
    Employees
    < 5
    Year of foundation
    2005
    Certifications
    ISO 9001:2008

    Watch

    A.D.O. Zerspanungstechnik GmbH

    The family ADO was founded in 2001 and since then performs turning and milling of individual items, as well as to small and medium series by. The good cooperation with competent partners makes it possible also to offer our customers yet another addition service. These include round and flat grinding, all welding processes, laser and flame cutting and surface treatments and hardening process. In addition to a flawless, high-quality execution, our company is a fast, economical and flexible to the customer, which is enabled by our lean and efficient disposition. Due to our PPS system and the MDESystems we are able to individually adjust our production to our customers and respond to particular emergencies. Through this technique, we can guarantee our customers absolute punctuality in every situation. We guarantee the quality of our work you through competent and motivated employees.Through our clear mission run, the DIN EN ISO 9001:2008, we guarantee quality and punctuality. On request, we conduct a 100% inspection of parts. Machining Using the latest CNC technology, we are capable of meeting your requirements, whether single piece or series, to meet the highest quality. Quality assurance We guarantee the quality of our work you through competent and motivated employees. Through our clear mission run, the DIN EN ISO 9001:2008, we guarantee quality and punctuality. On request, we conduct a 100% inspection of parts. Measurement Quality is our highest demand - measured with the latest 3D coordinate metrology. Frästeile max. Length 1020 mm max. Width 650 mm max. Height 500 mm Turned parts max. Diameter 600 mm max. Length 800 mm Flange components max. Diameter 600.00 mm max. Length 800.00 mm Screws, connectors, and gears max.Diameter 600 mm max. Length 800 mm
    > Read more
    Employees
    50 - 100
    Year of foundation
    2001
    Certifications
    ISO 9001:2008

    Watch

    K-Form Präzision in Kunststoff GmbH

    K -Form was founded in 2000 from a technical centre for precision tools and has developed since then to a reliable supplier of injection molding products for all branches. K -Form supports you by the development and realisation of complicated assemblies and articles from the first concept up to the ready product. Starting with the consulting, small series, tests and preproduction, to the point of serial production K- Form proves daily their competence in the matter of precision injection molding. The modern machine park is fully equipped, so that under all conditions optimum results are achieved for our customers. K-Form disposes of a modern and complete machine outfit and air-conditioned measuring space for the production of first sample, inspection test reports and the IPC. For the consignment and packaging of medicine products a clean room ISO class 5 is also available. Short and flexible production times ensure a certificated manufacturing process with clear structures and quick decisions. In connection with a strict quality control after DIN EN ISO 9001 and DIN EN ISO 13485 the most challenging projects can be realised for you efficiently. By close collaboration with our partner companies MeBo-CT, Peter Schubert Präzisionswerkzeugbau GmbH and Werkzeugbau Ehlenbröker GmbH we cover for you the complete spectrum in the plastic injection molding technology. Our benefits: Project engineering Plastic injection molding Tool construction, form construction, assembly Tool service, repair and maintenance Packing and consignment Logistics with own fleet of cars
    > Read more
    Employees
    10 - 20
    Year of foundation
    2000
    Certifications
    ISO 9001:2008

    Watch

    Geissel GmbH

    Description Flexible. Forward-looking. Personal. On that you can rely. The name Geissel stands for commitment and responsibility. Stands for tradition and innovation. Since 1920 we have been an owner-managed family concern and now we are in the fourth generation. Our products are used in all sectors of industry. We process all machinable metal materials, in sizes ranging from 4 – 90 mm. With production facilities covering over 10,000 m², we produce with more than 30 of the very latest CNC and conventional multi-spindle automatic lathes, with bush-type and automatic turret and other CNC machines. Another Geissel production sector are cable glands in metric, PG, BSP, BSC and NPT made of brass, polyamide and stainless steel 1.4305 as well as 1.4571. We had expanded our production for injection moulded plastics and special casting sealings a few years ago. The principle that “Our customers’ success is ours as well” guides our working and thinking to this day. We expect a lot of ourselves, and are never satisfied with resting on our laurels. And that’s another reason why we go from strength to strength, we continue our logical development, we continue to search for new, even better, more efficient solutions. And we find them. Try us – we have over 150 motivated and qualified staff around the world to look after your affairs. The demands of our customers are important to us. To be able to fulfil them today and in the future, we develop a little bit more every day. Quality is the subject which for us has absolute priority. Here we not only have a stringent demand defined, we apply extremely strict quality criteria in all directions. We have for a long time been testing analogous with ISO 9001. For us that is a matter of course. For you, that means dependability. And because satisfied customers and satisfied suppliers are always the best references, we can demonstrate our top quality on the basis of numerous awards. Many thanks indeed. You too can benefit from our know-how. From some of the most modern manufacturing technology, highest precision and value for money. We dedicate our efforts to your success.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1920
    Certifications
    ISO 9001:2008

    Watch

    Buro Präzisionsdrehteile GmbH

    metal cutting technology, Steel, stainless-, brass turning, milling, grinding, inductive hardening, assembling
    > Read more
    Employees
    50 - 100
    Year of foundation
    1969
    Certifications
    ISO 9001:2008

    Watch

    APOSTOLAKIS APOSTOLOS Co LTD PARTNE...

    FGPMW, is a small but precise workshop based in Greece. We are a newly founded Company, with a core of executives with decades long experience in high precision machining. We are capable of manufacturing small series parts, and follow the highest international standards. We are certified avcording to ISO 9001:2008 and in the procedure arriving to 2015 standard. Furthermore, we have started compliance procedures according to AS 9100 rev. d. Our manufacturing process suffers exceptional quality controll and takes place under a controlled microclimate in terms of temperature and humidity. Our basic mechanological equipment includes precision horizontal cnc lathe 2 axis, precision vertical machining center 3 axis, precision vertical machining center 4 axis. Precision machining center 5 axis is expected within the year. All measuring equipment, as also the machines are certified and calibrated by third party organisations. We are proud to have clients such Hellenic Navy, Hellenic Aviation, PPC SES, REINEKE MESS, INTRACOM DEFENCE ELECTRONICS.
    > Read more
    Employees
    5 - 10
    Year of foundation
    2014
    Certifications
    ISO 9001:2008

    Watch

    MELO Srl

    For over 40 years we produce for third parties components for machinery, ranging from the bevel gear used for agricultural machinery, industrial vehicles and cars, to large gears used in harvesters, cutters and harrows. We also manufacture special gears for sump machines and ground gears for cars, all through an advanced production system that allows us to know in real time the progress of the production cycle. We also take care of the realization of gears to customers' drawing, a service that responds to the increasingly demanding requirements out of the market standard. To ensure a high quality product, during all the phase of machining subject the material to a rigid and constant control by means of the product verification techniques defined for individual work areas. A guarantee of quality attested by the importance of established customers over the years, among which include trademarks of international importance. We always paid particular attention to the updating of our operating structure, coming to today to have an integrated apparatus, flexible and extremely competitive as regards the quality of the product and processing times.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1966
    Certifications
    ISO 9001:2008

    Watch

    CANTIN GROUP

    We offer our know-how in the areas of sheet metal processing, mechanics, welding, assembly, painting - in (wet and powder coated). We have been 27 years in the sheet metal processing industry operates (aluminum, steel and stainless steel). Our modern production area of ​​7200m2 over 5 halls, this allows us to tackle large production volume to interesting, competitive Preisen.Unser guiding principle is the principle of the complete solution, from design to volume production. Our industrial sheet metal processing department can realize your projects in steel, stainless steel or aluminum. Our mechanics department makes their machining and lathe centers (up to 9 axes) for the perfect realization of all your desires. At our 16 welding courses, we can use the following procedures for performing (TIG, MIG and MAG, spot welding, longitudinal welding) The strict handling and compliance with labor processes you also guarantees the installation of your parts delivered and complex products. Our Department of powder coating and paint shop we can offer a very wide range of surface treatment. The Cantin Group has a unique know - how appropriated for the benefit of your customers.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1986
    Certifications
    ISO 9001:2008

    Watch

    GBM Mold Technology Co., Ltd

    Welcome to GBM Mold! ” Stay Good, Strive to be Better.” GBM is a middle-sized manufacturer for precision plastic tooling, injection moulding, stack molding, single-shot and multi-component injection molding (2-K and 3-K, 2K with metal inserts ), rotary 2-shot molding and vertical insert molding ( metal-to-plastic molding). Our customers come from various fields, such as automotive, electric, medical,consumer, industrial and many others. We have an European after-service center in Netherland to support our European customers. Analysis, design and manufacturing of moulds are made in house. We have 7 tooling engineers, including mold designers and CNC programmers. For mould making we conduct 2-shift operation of EDM and CNC milling. Our tooling processes include: Drilling and tapping, CNC milling, steel hardenning, grinding, EDM (Electric Discharge Machining), wire-cutting, SPI standard polish, texture, laser engraving, mould fitting and assembly, injection. The Granules and raw materials we have processed include but not limited: Polypropylene (PP Copo, homo), polyethylene (PE, 2-shot molding), polycarbonate (PC, clear, 2-Shot molding), ABS (standard or high impact), polystyrene (PS), Polyamide (PA6, PA6.6, unfilled, 10-60% GF filled) , Polyoxymethylene (POM),Polybutylene terephthalate (PBT), Polymethylmethacrylate (PMMA,acrylic), PC / ABS blend, etc. , UL approved anti-flame plastic resins. We have learnt good experience from the successful tooling and molding projects, such as: 1). Multi-level stack mold design and stack molding. 2). High temperature moulding for: Polyetheretherketone (PEEK), Phenylenesulfide (PPS), Polyphenylene sulfone resins (PPSU). 3). Elastic materials molding for: Thermoplastic Elastomer(TPE), Thermoplastic polyurethanes (TPU), Thermoplastic Vulcanizate (TPV). 4). Molding and mold making for optical materials: PC, PMMA. 5). Unscrewing moulding, rotation ejection system for parts have interior threads. 6). Metal-to-plastic insert molding: Besides standard 2-plate mold for insert molding, we also do rotary insert molding, use a special mold also known as shuttle mold. The mold with 1 injection side and 2 ejection side, which can rotate for moulding operator or robot to place metal insert to another mold half, therefore shorten production time and lower production cost. 7). 2-Component molding: First shot PC+ second shot PE; First shot PC/ABS blend + second shot TPV. We are familiar with Arburg L-shape 2-shot molding machine. Quick details about GBM Mold: 1) Tool room area: 1,200 m². 2) Tool making: 7 designers and CNC programmers, 6 mold fitting operators, 2-shift CNC milling and EMD. 100% inspection for electrodes and main mould components. 3) Mould capacity: From less than 1kg mold component machining to 5,500 kg 2-shot mould. Family mould, as much as 12 different parts with different quantity made in only one mold. Multiple hot-runner mould. 4) Annual output: 150 molds made in 2016. Over 80% export to North America to Europe. 5) Injection moulding: 1-K, 2-K, 3-K, multi-component injection molding, stack molding, vertical molding, metal-to-plastic insert molding, overmolding, rotation type ejection for plastic parts with interior thread profile. 6) Service: Part analysis, moldflow, design for manufacturing (DFM), mould design, mold manufacturing, texture and polishing, small lot production, mass injection molding, part assembly, coating and printing. We look forward to your inquiry!
    > Read more
    Employees
    50 - 100
    Year of foundation
    2006
    Certifications
    ISO 9001:2008
Limit search by:
Region
Technologies
Materials
Company data
Industries
Certifications
Top categories
CastingSintering