951 Suppliers found
List
Raster
Map
Sorted by 

    Watch

    Techpilot Premium Member
    Beutter Präzisions-Komponenten GmbH...

    Your expert for complicated components and very critical applicationsBeutter is a supplier of fine mechanical components with a high production depth in small batch series. • Beutter was founded in 1909, and is located in Baden-Württemberg, very close to the A81 motorway, 60km south of Stuttgart. • We have about 125 employees. Of our production staff, over 90 % are skilled workers. • We have the capability to perform, in-house, all machining processes (turning, milling, grinding, honing), while for special processes and surface and heat treatment processes we use competent third-party suppliers. • For us, the ideal is small- to medium-sized production runs with a lot size of between 20 and 1,000 pieces. • Beutter is particularly capable within the manufacturing of components with close production tolerances. • We process all machinable materials, and are particularly experienced in processing high-alloyed steels (stainless steel, V2A, V4A, 1.4441, 17-4PH), titanium and special materials (inconel, hasteloy, Ni-base alloy, chromium molybdenum steel, tantalum, platinum-iridium, PEEK). • Our main fields of activity are: Medical technology, aeronautics, hydraulics, military engineering, mechanical engineering and measuring equipment technology. • Our quality management system is certified according to DIN EN ISO 9001:2008, DIN EN 13485 (medical products) and DIN EN ISO 9100 (aeronautics). • We can process your data via our CAD system “SolidWorks“.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1909
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    TECHNOMETAL-Orfanidis EE (lp)

    We provide machining services of unit parts, prototypes and short-run production. Problem-solving and provision of suitable machining solutions are what we do best. Our customers trust us because we are flexible with their enquiries and requirements, we deliver on-time and offer short- delivery times. This is what makes us stand out from the rest. The precision parts that we produced are known for its top quality, due to the raw materials used. Our experienced and passionate personnel carry a high sense of responsibility towards our customers and their product. We continue our expansion and growth, especially in technological developments. Our precision components are manufactured according to customer drawings, specifications and international standards. Design and production by reverse engineering method is also provided as a service. And finally, we offer competitive pricing, guaranteed!
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1986
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    Kreutz & Mock GmbH

    About us Kreutz & Mock is a medium-sized company and the leading manufacturers of wire bending parts of all types. With over 3000 different articles we can offer our customers a wide and diverse range of different wire products. The necessary machines for the production are developed and built in-house by our own engineering department which gives us the possibility to always be flexible according to our customer's needs. You can find further details about us and our philosophy on our website. Products We manufacture wire bending parts in all sorts of variations and models. We supply many industries with our products like the automotive industry, construction industry, agriculture, blinds manufacturers and many more. We also have numerous technical bent parts in our repertoire. We are happy to try to achieve your specific needs and requirements, because quality, punctuality and being in step with actual practice are our basic principles to deliver high quality as well as best functionality products. It does not matter whether they are single quantities, small quantities or a large series. We are flexible and deliver quality at fair conditions. We offer + Qualitycertficate DIN ISO 9001:2008 + in-house specified tool construction + in-house machinery construction + quick production of samples + technical and experienced know how + skilled telephone service + large production spectrum Materials Every material processed in our factory has a dedicated inspection certificate that will be provided with your delivery on request. We manufacture bent wire components for you in all variants and materials. Here a selection of the materials used: + Stainless steel wire 1.4301, 1.4310, 1.4362, 1.4401, 1.4404, 1.4571 in different tensile strengths + Spring steel wire 0.9 mm to 6.0 mm. Qualities A, B, C, D + Steel wire C9D bare or copper-plated. C9D soft galvanised in 1.0 mm to 8.0 mm + Crapal wire + Becrosi valve spring wire + Silver and Palladium wire
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1934
    Certifications
    ISO 9001:2008

    Watch

    Techpilot Premium Member
    Orfanidis M. Anastasios (ORMIT)

    Orfanidis Anastasios, having ORMIT as its distinctive title, from the early years to today’s rapidly changing environment, maintains a history of continuous effort, challenges, and evolving technical experience. The company started operating in 1991. Over the years, it has been transferred to privately-owned facilities in the Drimos, Thessaloniki. Since then, the company has begun its investments in the CNC machines sector, starting the course towards a higher level of technical knowledge and experience, as well as a higher degree of flexibility.
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    1991
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    WTS Solutions GmbH

    Since 2012 we have been supplying sophisticated parts from casting, sintering, welding and construction metals according to drawings and specifications for industries such as: B. for mechanical and plant engineering, wind turbines, the metallurgical industry, power plants and steel construction. We cast iron, steel, stainless steel and high-alloy steel parts for various industrial uses. Our production site is in China. We represent our foundry in Germany as well as other partner foundries in China, all of which are qualified according to ISO9000/9001. They are also certified by SGS, TUV, CE, AD2000, etc. Quality is our top priority. We supply customers with products that are 100% tested. In addition to normal operational quality controls, we also carry out product-related tests according to customer specifications, from prototypes to series production. The desired certificates or acceptance reports are included. We are constantly striving to create more benefits for our customers, saving them more time and money.We react quickly to every customer request for project processing and changes. We supply customers according to the desired Incoterms conditions, also duty paid. We take care of everything until the goods are delivered. Furthermore, we also offer cutting tools for metalworking, in particular common PCBN / PCD / CVD indexable inserts and tools, special special inserts and special tools, as well as solutions for industrial production. We have the "Cost Reduction and Productivity Increase" experimental program, where our customers have saved tooling costs and you can save too.
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    2012
    Certifications
    DIN EN ISO 3834

    Watch

    Techpilot Premium Member
    Lungmetall OHG

    We are a medium-sized company in the field of metal processing. Our core competencies include the production of series parts and assemblies for industry and plant and mechanical engineering, in particular the food and beverage industry. For over 75 years, Lungmetall OHG has stood for efficiency, flexibility and competence in steel, stainless steel and aluminum. Whether individual or series production, with our modern machine park tailored to the requirements of our customers, we manufacture for you flexibly, inexpensively and quickly. We are lean enough to flexibly implement your ideas and wishes, but also large enough to provide you with the capacity you need, even for large series. Thanks to our high level of vertical integration, we appear on the market as a system supplier, as we are not dependent on other trades. This manifests itself in short delivery times and a high quality standard. With our currently 60 employees and our in-house design office, we offer you an extensive service portfolio and reliable processing of your orders! We would be happy to win you as a valued customer and assure you of a partnership and team-oriented cooperation.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1924
    Certifications
    DIN EN 1090

    Watch

    Techpilot Premium Member
    Martema UAB

    Martema UAB manufactures components for machine building industry. Our products: pins, axles, bushings, rollers, flanges, fittings and other parts; Manufacturing direction: small (from 10 pcs) to medium size series. Manufacturing processes: turning, milling, welding, hardening, surface coating, billets sawing. Design: we do desing and draw components, assemblies and later run manufacturing. Markets. working with domestic customers but majority of production is exported - Scandinavia, Germany, UK, USA. . Goals: quality manufacturing and reach agreed terms.
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2004
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    METAL INDUSTRIES S.R.L

    METAL INDUSTRIES is a company specialized in metal constructions for industrial use. Founded in 2012, METAL INDUSTRIES expanded rapidly and immediately had well-known and respected partners locally. METAL INDUSTRIES S.R.L. specializes in metal constructions with or without processing for industrial purposes. Since 2012, 90% of production has consisted of exports to Germany, the Netherlands, Belgium, Norway and France. In all these years we have managed to build strong partnerships, constantly trying to improve the quality of our products, our technical equipment and the mastery of our employees. At present, our company has 25 employees. Equipment: 6 kW fiber laser cutting machine 1500x6000 (year 2022) 1.5 kW pipe fiber laser cutting machine (until 160mm diameter) CNC bending machine (LVD 4000/220 tons, year 2015) CNC cutting machine (Haco) CNC cutting machine with hypetherm plasma, year 2015 CNC cutting machine oxy-acetylene CN bohrwerk (miling & boring tos machine) Grinding tos machine, turning CN, Proma, year 2015 Band saw machines Mig-mag welding machines (9) Vig welding machines (3) Punching machines (3) 5 ton aerial cranes (1) We produce assemblies or subassemblies for different industrial machines: packaging machines, machines for the production and processing of cardboard, wood processing, production of polyethylene pipes, etc. Through our collaborators we offer surface finishing services: sandblasting, galvanizing, painting.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2003
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    CES CNC engineering solutions

    our service Ces GmbH offers extensive services in the field of order-related one-off and series production. If you have capacity bottlenecks, we are at your side. With our machine park, we process workpieces made of aluminum, steel, stainless steel, plastic or brass (other materials on request) in the highest quality and on time. With the ultra-modern CNC machining center, ces has experience in machining technology, both for customer-specific one-off as well as large-scale production. Our machine park 5-axis and 3-axis CNC milling machines CNC and conventional lathes CNC plasma oxy-fuel cutting machine Precision flat bed grinding machine Fully automatic band saw Hot burnishing plant Engraving machine Hardening furnace
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2016
    Certifications

    Watch

    Techpilot Premium Member
    STS Systemtechnik Schänis GmbH

    We process metal with heart and mind The proof of market relatedness and continuity Since its founding in 1924, we maintain a thriving collaboration with numerous commercial and industrial companies. The foundation for mutual success is our long-standing experience and expertise, our unrivaled performance and our legendary reliability. Our market and services We solve the specific tasks with all our knowledge and the latest tooling technology. We support our customers with passion through all phases of a project, however complex and convincing a perfect solution, as well as cost and schedule adherence. As a supplier in the field of punching, bending, pressing, we are equipped with latest machines and measurement techniques. Our strengths lie mainly in the tool Falling production for sheet thicknesses from 0.4 to 4.0 mm. In addition to manufacturing these parts further post-processing are possible in our home; trovalizing / vibratory grinding, cleaning, powder coating, painting. Our core competencies in sheet metal processing (stamping, bending, welding, assembly, etc.) are the result of many years of experience. Specific duties of our customers require individual solutions. We support our customers knowledgeable about all phases of a project, ie from consulting to product delivery. Here convince our services both professionally and cost comparatively as well as scheduled. Contributing a modern tooling and powerful resources at critical. Our competencies Development and Planning Toolmaking Punching Assembly Welding Powder coating
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1924
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    Bileske GmbH

    We are manufacturing service providers for precision parts in the field of machining technology, as well as the related services. On-time delivery and compliance with the cost factor are a matter of course for us. Our customers, who have been completely satisfied for years, also trust in this. Individual and prototype or serial parts made of any material can be manufactured using modern technology according to customer requirements. Our goal is always to implement projects with the customer quickly, precisely and efficiently. A constant expansion of the machine park and the cooperation with the cooperation partners guarantee mass-blown solutions for the individual requirements of the customer. What can we do for you? We will be happy to make you an offer!
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2022
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    Simplastic

    Simplastic is a Portuguese thermoplastic injection company, that supplies a service going from design and development to assembly, including supply chain management. We produce semi and finished products with metallic, electric and electronic components, providing time proven integrated solutions. We have 45 years of experience producing for and working closely with clients in several sectors, such as household appliances, electronics, lighting systems, robotics, agriculture, etc.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1977
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    Pro-Moulding Kft.

    HEAVY - It's EASY for us! Pro-Moulding has over 30 years of experience in the field of plastic injection molding and has been characterized by precision, quality awareness and speed from the very beginning. Our high quality infrastructure guarantees a full service from mold and product development to serial production and numerous services. Through the motto "hard comes easy to us " the company has developed as a relevant partner mainly in Austria, Germany and Hungary. With an ultra-modern machine park in the high tonnage range, even the largest components can be easily implemented. We supply well-known equipment and component manufacturers in the outdoor, industrial, office furniture, medical technology and automotive sectors. Pro-Moulding employs about 100 people and is a company with a very solid financial background. With our modern machinery we are specialized in the production of large volume plastic parts. Our employees and the consistent implementation of the motto 'hard comes easy to us' are the success components for high customer satisfaction and growth. We process common engineering plastics such as ABS, POM, PA6.6, PPS, PBT, PP, PMMA and many other materials on 10 modern robot-controlled ENGEL machines with clamping forces from 88 kN to 2300 kN and shot weights bigger than 10.000 g. Our unrestricted goal as a company (team) is to be an A-supplier for each of our customers and thus a partner. To meet this claim, the continuous improvement of our processes (CIP) as well as the regular auditing of our quality management according to DIN EN ISO 9001:2015 is a matter of course for us. Our quality claim starts with the preparation, is accompanied by regular and random checks, internal and external audits and is ultimately supported by the high motivation of our employees. Certified according to EN ISO 9001:2015 and EN ISO 14001:2015 A direct contact person, supported by digital processing and confidentiality agreements, is part of a successful cooperation.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1992
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    Lamipress Srl

    Lamipress is a SME founded in 1979 in Bologna – under the name of Meccanica Stamper – by the Piccinini brothers. The core business is cold stamping of sheet metal (shearing and deep drawing) including internal design and construction of the shearing dies. We have always focused on innovation and cutting-edge machinery: we are a 4.0 company that offers mechanical components upon drawing of the highest quality, guaranteed and certified, at competitive prices, thanks to our latest generation management software and our expert operators. We supply companies and multinationals in different sectors, in Italy and abroad, that need customized industrial series products. We offer a complete service thanks to the internal management of all industrial processes: from the design and construction of the die, continuing with production, up to the packaging of the finished piece including treatments.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1979
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    LMS Landshuter Metall- und Schweißt...

    We focus on developing and producing high-quality, pre-finished parts, components and systems of metal, which are available also, including industrial surface treatments. For this purpose, stand 15.000 production areas in Germany and low-wage countries. With our experienced staff and a held on the current state of the art machinery, we provide for each task within our manufacturing range a solution - fast, flexible and cost-conscious.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2010
    Certifications
    DIN EN 1090

    Watch

    Techpilot Premium Member
    STAMM Blechtechnik GmbH & Co. KG

    The Company Established in January 2004, we are a modern company in the field of sheet metal processing and supply. Our Strength: * a company philosophy aiming at customer satisfaction * flexibility by means of a clear company structure * quality management DIN ISO 9001/2000 * excellent price-performance ratio * state-of-the-art machinery * conveniently located with regard to transport facilities (directly on A 73) * a wide product portfolio with high flexibility Besides classic sheet metal processing, our product portfolio also includes laser cutting of sheet metal, pipes and profiles as well as edging on CNC-controlled machines. Sheet Metal Processing * welding with WIG * welding with MAG / MIG * drilling * riveting * surface treatment * laser cutting * edge bending * resistance welding * turning * milling * spotwelding Surface Treatment * chromium-plating * galvanising * powder coating * sandblasting * varnishing Laser Cutting: Constructional Steel, Stainless Steel, Aluminium TRUMATIC L 3030 Size 1500 x 3000 from custom-made articles to small series to mass production Laser performance package The machines of the series TRUMATIC L 3030 series are equipped with the TLF 4000, a laser of the latest generation by TRUMPF. The machines of the series TRUMATIC L 3030 series are, thanks to this powerful laser combined with an extremely quick laser power control, not only capable of quick cutting of sheet metal, but also of cutting materials of high thickness such as 20 mm thick constructional steel. CNC-Edging and Bending incl. Bend Angle Sensors Hydraulic CNC-edge bending presses bend or stance exactly fitting components - economically and flexibly: * minimized set-up time due to freely programmable X- and R-axis and fast tool-changing-system * electro-hydraulic slide engine in proportional valve technique * multi-axle CNC-back gauge in X and R * self-centring upper tool adapter * hardened lower tool adapter * a large edging clearance and extensive variability in stroke, daylight and throat allow a wide product portfolio * minimal operation and secondary processing time also with Z-edge- bendings due to no necessity of turning the element * high repetition accuracy due to CNC-camber * laser-hardened edge bending tools * angle sensor ACB
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2004
    Certifications
    ISO 9001:2008

    Watch

    Techpilot Premium Member
    Trautwein Präzisionsdrehteile GmbH

    For more than 50 Years our company has been experienced in high precision manufacturing of turning work pieces. Due to the availability of always the very latest CNC turning machines and CNC turning centres with up to 32-axis processing devices, we are able to produce complete very complex work pieces in small, middle and large production lots. With the current equipment we process round bars in diameter size from 3 up to 65 Millimetre as well as chuck pieces up to 200 Millimetre in mainly nonferrous metals especially in all kind of brass. The combination of the latest machining technology, decade-long experience as well as outstanding knowledge and know-how guaranty our customers an extremely high quality based on a maximum of flexibility nowadays. The accredited Quality System according to DIN EN ISO 9001:2000 has been understood as basic standard. Thereby we offer our service and comprehensive consultation for an ideal fabrication of turning and machining parts from the early stage of development and designing already. Last but not least we provide our customers and ourselves the guarantee of a sustainable and successful co-operation due to an outstanding competent team of specialists. Our core competences are in fittings, valves and controls engineering, mechanical engineering, electrical engineering, medical engineering, industrial art, aerospace industry, modelling industry and instrumentation. OUR KNOW-HOW - YOUR BENEFIT * Superior Price-/Performance-Ratio = standard * Highest precision is naturally with us * Absolutely reliable and on shedule * Highest productivity through decade-long experience and know-how * Development/Optimisation of products and parts for high efficient serial production Produktion * Short turning parts * Long turning parts * Inserts * Designer turning parts * Small-, medium- and large series * O- and sampling parts manufacturing * Component assembllies * Surface treatment and special finishes
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1964
    Certifications
    IATF 16949:2016

    Watch

    Techpilot Premium Member
    Emmeci S.r.l.

    Bevorstehende Änderungen am Verlauf Der Übersetzungsverlauf steht bald nur noch zur Verfügung, wenn du angemeldet bist. Er wird dann zentral über Meine Aktivitäten verwaltet. Der bisherige Verlauf wird durch dieses Upgrade gelöscht. Speichere also Übersetzungen, auf die du später noch zugreifen möchtest. OK 1643/5000 QUALITY IS OUR MOTTO ---In such circumstances----- EMMECI is able to manufacture turned parts for X-ray machines / X-ray machines and X-ray tubes. EMMECI is an Italian family company that has been active in the field of turning technologies for over 50 years. We realize turned parts according to customer drawings and flexibly align our production to our customers' wishes. Our mission is to accompany the customer in the development of turned parts and to relieve them of activities that are not their core business. We can draw on a wealth of experience and specialist knowledge that we have been collecting and maintaining for over 50 years. Industrial sectors for which we work or are able to produce are the construction industry, equipment for painting and welding systems, shock absorbers and braking systems (not in the automotive sector), forklifts, aftermarket (liquid gas, motorcycles, cars, hydraulic valves), fountain pens and wristwatches, oil hydraulics , Pneumatics, hydraulics, medicine. In the field of medicine, we are able to manufacture turned parts for X-ray machines / X-ray machines and X-ray tubes. We usually produce series from 5,000 parts. We particularly like to work on the implementation of complex parts, because these challenges inspire us to continuously improve. Inquiries for complex parts confirm our seriousness, competence and professionalism. Since we also work for the automotive sector, it is in our DNA that we attach particular importance to the quality of our products. EMMECI is a multi-certified supplier who works according to the latest standards. Feedback geben Verlauf Gespeichert Community
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1963
    Certifications
    IATF 16949:2016

    Watch

    Techpilot Premium Member
    GASTL GmbH

    We manufacture machines, machine parts and spare parts. Repair and maintain your existing systems and carry out revisions by. Through the use of CNC technology we achieve a high dimensional accuracy in the field of spare parts. Challenges are discussed partly on site with the customer, so that together fast and optimal solutions are found for difficult problems and tightest deadlines. Activities Projects
    • Manufacturing of delivery devices for a glass building operation
    • Manufacture of heat exchanger components with high quality standards
    • Design, construction and installation of an extra-wide canopy
    • New development and manufacture of an apparatus for inserting dowel pins in a polyamide / steel composite system
    • Revise of milling heads for the wood manufacturing industry
    • Design, planning and construction of a new Entaschungssystems for
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2006
    Certifications

    Watch

    Techpilot Premium Member
    FETEC Engelhardt GmbH Zerspanungst...

    The company Fetec Engelhardt GmbH is a modern enterprise specializing in CNC milling and turning as well as the construction of complete functional units. For the 2D and 3D Complete machining of simple to extremely complex workpieces made of steel, stainless steel, aluminum, plastic, etc. we are the right partner for you. Even sophisticated operations such as the production of free-form surfaces, supported by a CAD-CAM programming system belong to our services. Business The company FETEC Engelhardt GmbH was established on 1 Founded in May 1997 in Ruhla / Thuringia as a civil law and on 1 July 2005 umformiert into a GmbH. Starting point of the company producing basic turning and milling parts, the one manufactured in order for suppliers to the automotive industry. With the move in January 2001 in a new building, the production of parts, prototypes, small batches in contract manufacturing as well as complete assemblies and devices has been made possible.The expansion of contract manufacturing required on 1 July 2006 another move to a larger and also its own production facility. The workforce of FETEC Engelhardt GmbH consists of seven employees and three apprentices. Managing directors are Gerald and Ursula Engelhardt. Products Because of our diverse experience in the field of metal machining, we are able to offer comprehensive services. These range from performing individual work steps bishin for assembly of complete functional units. Turn 1 Turning the conventional way ----- BRAND NEW ------- Lathe with bar feeder 3m to 32mm diameter x / y machining with driven tools * Between centers 1000mm x D 220mm * In feed D 300mm * From the rod D 47mm 2 CNC turning with counter-spindle, Y-axis and bar feeder * Maximum diameter D 100mm (45mmStange) * Maximum turning length D500mm Mill 1Milling in a conventional manner * X-, Y, - Z-direction 300 mm x 220 mm x 300 mm 2 CNC milling Maximum travel: * DMU 60T monoblock (five axes) / X 500 mm, 400 mm, Y-, Z-400mm * Hurco VMX 42t (3-axis) / X 1060mm Devices Production of complete functional units * Devices * Tools * Assembly workstations * Special Machines * Prototypes * Items * Small series * And much more
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1997
    Certifications

    Watch

    Techpilot Premium Member
    Industriemontage

    Our company specializes in sheet metal- and profile processing. The latest CNC technologies, software and productivity helping us with high productivity to advance. We offer document processing, laser or water cutting, bending, welding and surfacing including reliable delivery. In addition, we offer experienced German speaking welder, pipe fitter and foreman for pipe assembling. Our employees gained experience on various construction sites throughout Europe, see below www.industriemontage.sk. Our products match with the strictest European standards. The company is certified with ISO 9001: 2015. The main aim of our company Industriemontage is the satisfaction of our customers, especially with the quality of the manufactured products, together with just in time delivery. More about us can be found on our website: www.industriemontage.sk
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2014
    Certifications
    ISO 9001:2008

    Watch

    Techpilot Premium Member
    MPP solutions GmbH

    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2001
    Certifications
    DIN EN 1090

    Watch

    Techpilot Premium Member
    Samulski GmbH

    Since its founding in 1985, the Thomas Samulski GmbH manufactures mechanical components and assemblies. Our range of services covers the CNC turning and CNC milling, and the production of small Schweißbaugruppen.Die assembly manufacturing and 5-axis milling takes on an ever greater role. In close cooperation with specialized partners, our range of services also includes centerless grinding, laser machining, hardening and all common surface refinements such as galvanizing, burnishing, anodizing, painting etc. The Samulski Thomas GmbH supplies a wide range of industries such as mechanical engineering, equipment / apparatus, the testing / measuring equipment, the lighting industry, the construction industry, the automotive industry, as well as tool manufacturers. A team of experienced and motivated staff put us in a position to react flexibly to customer needs. Regardless of whether it is a simple component or a challenging assembly, we provide pre-finished quality. Give us a try!
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1985
    Certifications
    ISO 9001:2008

    Watch

    Techpilot Premium Member
    Net-Components GmbH

    After many years of experience in drive technology and gear construction, Net-Components GmbH was founded in 2003 by Dipl.-Ing. Tarkan Peker. It is a DIN EN ISO 9001:2008 certified company. With our knowledge of the international market and with the goal-oriented way of working, we always strive for market-driven and customer-oriented solutions. The execution of complex tasks in series production, medium and small series production, as well as prototyping is carried out on modern machining centers, which guarantee a consistently high quality and flexibly realize customer requirements. We are able to make short-term as well as long-term investments depending on the order situation and thus secure the production with regard to quality, deadlines and prices. One of the company's principles is to manufacture our products economically using safe and environmentally friendly processes and to meet high quality standards. Our striving for constant improvement and cost-effective production leads to the competitiveness of our customers. We offer: - Turned parts - Milled parts - Forged parts - Complete assemblies Small or large series
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2003
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    JS Lasertechnik Jens Schumacher e.K

    JS-laser technology is a young company with modern technology on the market for laser job shop. Our qualified staff are continuously trained and thus ensure a high quality and fast order processing. JS-laser technology customized for your prototypes, individual parts, small or large series and assemblies. Our multi-shift operation, we are able to produce large series in the short term. Get in touch with us, we will advise you and make you an offer! Services We offer: · CNC - Laser cutting (TruLaser 5030) · CNC - Bending (TruBend 3120) · Steel, stainless steel and aluminum processing · Welding (MAG / MIG and TIG) · Production of prototypes, individual parts and small-to large-scale production · Assembly manufacturing · Pipeline construction · Geländerbau · Flexibility in the design of the parts as well as easy modification · Short-term delivery of large series by multilayer system · Adoption of existing drawings in DXF, DWG or other formats · You have only a sketch? No problem for us! Laser Cutting We cut for you sheets up to a thickness of: 25 mm mild steel 20 mm stainless steel 12 mm aluminum at a maximum
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2007
    Certifications
    DIN EN 1090

    Watch

    Techpilot Premium Member
    RABATECH Kunststofftechnik GmbvH

    In 2015, we took over the company Zink Kunststoffsystemtechnik GmbH including customers and staff. On 01.11.2018 we re-founded the company and renamed it RABATECH Kunststofftechnik. Meanwhile, we have grown to a staff of 37 employees and a machine park of 23 injection molding machines in the range of 12.5 tons to 270 tons. Our strengths are already in the development phase to offer our customers the support. We make the material selection, optimize the components Injection-molded make the tool designs and constructions, build the tools and then bring the project into series production. Our team consists of several skilled injection molding technologists.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2018
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    BAUCH CNC GmbH & Co. KG

    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2018
    Certifications
    IATF 16949:2016

    Watch

    Techpilot Premium Member
    Pro Metall Blechverarbeitung GmbH

    About Us: With years of experience in manufacturing high quality metal parts of President Friedrich Baumann was founded on 01.01.1995 per metal. The company grew continuously since then in sales and employees. Today the company employs 40 full-time employees who focus on one thing: Your PRODUCT - as if it were a part of us! Here are working professionals for professionals - side by side. Our administration: competent - flexible - fast - slim - available Our design / AV: We work with CAD-CAM programs. Entrust us with DXF files, STEP and SolidWorks data They have complex parts? Let us think for themselves! Our production: optimized for fast throughput without idle times (KANBAN); with high precision and a wide range of production lot size from 1-1000 ... Our Quality: For us quality is a continuous process of improvement Quality management according to DIN ISO 9001 Our Services: Some of our customers waive inspection of incoming goods. We also provide initial samples for direct use in the assembly department Our suppliers: guarantee us a high and flexible material availability Your benefit: What do you have of working with us? Looking for a supplier who offers you more than cheap prices? Someone who ... ... quickly reacts and thinks, ... making the case for your product ... and is interested in a long-term relationship? Then you are at the right per metal Achern. We offer a customer-supplier relationship a family-run medium-sized company. You have to deal with challenges? Let's tackle this together. We control each job in a tremendous amount of know-how. This will benefit you. With us, the customer gets everything from one source. From a simple sheet blank, about creating a complex assembly to the construction of a finished machine. For this purpose, a high degree of flexibility. Our team carries with it full. we are a contract manufacturing operation in industrial sheet metal work and laser cutting, punching, edge, weld, round, paint, plating, coating, assemble individual components as well as complete system elements. eg: Chip disposal systems, cabinets, etc.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1995
    Certifications
    ISO 9001:2008

    Watch

    Techpilot Premium Member
    Select Tube GmbH

    We are a competent and motivated team with an optimal price-quality ratio, which specializes in the area of pipeline manufacturing. Select Tube GmbH quickly and cheaply manufactures just-in-time required parts according to samples or drawings, from prototypes to small series. Pipes in the materials steel, stainless steel, aluminum, winding tube or copper. Quality with which we convince: - High flexibility, even for short-term requests - High vertical range of manufacture - Piping systems completely ready for installation - Reliable customer service from the offer through production to delivery - A young team that will be happy to advise you on all aspects of piping systems - Production according to sample management, if no documentation is available
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2016
    Certifications
    ISO 9001:2015

    Watch

    Techpilot Premium Member
    GW St. Pölten Integrative Betriebe ...

    The GW St. Pölten is a modern industrial enterprise blank. The focus of the company with around 440 employees ranging from industrial parts manufacturing to production of components and complete systems. Advice during the development and construction phase completes the offer. Thanks to the greatest possible flexibility, the company is fixed and competent partner for many customers at home and abroad. Long ago, the GW St. Pölten has made as a modern problem solver a name. The different production areas such as metal working and processing, electrical installation, signage, etc. are equipped with advanced production facilities and therefore allow a high degree of vertical. The high standard of management, production and the products and services is impressively confirmed by a number of certifications in the fields of quality, environmental management, occupational safety and product quality. The ÖNORM EN ISO 9001:2008 certificate and the Austria Quality Seal are the best evidence. OUR PRODUCTS AND SERVICES Metalworking and PROCESSING Machining and Forming Technology with advanced CNC machines, assembly of complete assemblies, components manufacturing including surface treatment, serial production, sheet metal fabrication, welding and much more. ELECTRICAL ASSEMBLY / CABINET Partial and final assembly of electrical components, control systems, and manufacturing of complete enclosures and cable assemblies for mechanical and soldering work. Unlisted panel builder in accordance with UL 508A Manufacturer processed wire and wiring harnesses. SIGNS PRODUCTION, milling, engraving, POWDER COATING Signs in single or serial production to production of building control systems, including on-site installation. GENERAL ASSEMBLY Installations of all kinds, execution of various packaging, Kuvertierungs, sorting works and recycling activities. TEXTILE WORKS Curtain assembly and sewing of all kinds with the exception of clothing confection. Plastic injection molding / ZINC DIE-FOUNDRY Injection molded plastic parts to glass fiber reinforced plastics. Production of zinc die castings and surface finishing including finishing and assembly.
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    1981
    Certifications
    ISO 9001:2015
Limit search by:
Region
Technologies
Materials
Company data
Industries
Certifications