5405 Suppliers found
List
Raster
Map
Sorted by 

    Watch

    Ningbo Yinzhou Gain Machinery Co.,Ltd

    Ningbo Yinzhou Gain Machinery Co., Ltd., is a manufacturing enterprise focusing on design, development & production of one-stop service. Mainly engaged in high-precision OEM parts production. Gain Machinery Specializes in the production of stainless steel 304, 316L, duplex stainless steel 2205, stainless iron, alloy copper, aluminum, alloy steel and other materials. The product diameter is 0.5mm-500mm, tolerance can reach 0.005mm, Surface texture can reach 0.02μ. We passed ISO9001 / TS16949 quality management system certification. The Products cover auto parts, medical treatment, aerospace, electronics and other fields, exported to Japan, Israel & other Asian countries and Germany, the United States, Canada & other European and American countries. In year 2021, Automatic Mechanical Arm CNC equipment reach at our factory, improving the production efficiency and capacity a lot, especial for big quantity products. It brings us reducing production cost, short delivery time, steady quality. Fully equipped can service for medium and high quality product requirement. A complete quality control system help us to supply qualified products, and won good feedback from clients. So trust Ningbo Yinzhou Gain Machinery Co.,Ltd would be your best choice and business cooperator in future. https://gainmachinery.en.made-in-china.com
    > Read more
    Employees
    100 - 200
    Year of foundation
    2005
    Certifications
    IATF 16949:2016

    Watch

    Beutter Präzisions-Komponenten GmbH...

    Your expert for complicated components and very critical applicationsBeutter is a supplier of fine mechanical components with a high production depth in small batch series. • Beutter was founded in 1909, and is located in Baden-Württemberg, very close to the A81 motorway, 60km south of Stuttgart. • We have about 125 employees. Of our production staff, over 90 % are skilled workers. • We have the capability to perform, in-house, all machining processes (turning, milling, grinding, honing), while for special processes and surface and heat treatment processes we use competent third-party suppliers. • For us, the ideal is small- to medium-sized production runs with a lot size of between 20 and 1,000 pieces. • Beutter is particularly capable within the manufacturing of components with close production tolerances. • We process all machinable materials, and are particularly experienced in processing high-alloyed steels (stainless steel, V2A, V4A, 1.4441, 17-4PH), titanium and special materials (inconel, hasteloy, Ni-base alloy, chromium molybdenum steel, tantalum, platinum-iridium, PEEK). • Our main fields of activity are: Medical technology, aeronautics, hydraulics, military engineering, mechanical engineering and measuring equipment technology. • Our quality management system is certified according to DIN EN ISO 9001:2008, DIN EN 13485 (medical products) and DIN EN ISO 9100 (aeronautics). • We can process your data via our CAD system “SolidWorks“.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1909
    Certifications
    ISO 9001:2015

    Watch

    Shenzhen Wangdefu hardware and plas...

    WONDERFUL HARDWARE Manufacture CO., LIMITED is a complex group, and specializes in the MANUFACTURING metal parts, turning parts, machining parts, stamping parts, casting parts, automotive components including mechanical parts and electronic parts by CNC machine and stamping machine and products mould. WONDERFUL has strong manufacturing and sourcing capability, the headquarter locates in Hongkong and factories locate in Shenzhen Special Economical Zone, China. the manufacturing bases and suppliers are mainly in the southern and eastern China, most of the products are exported to the Europe, America, Korea, Japan and partially supplied to the domestic market.
    > Read more
    Employees
    100 - 200
    Year of foundation
    2003
    Certifications
    ISO 9001:2015

    Watch

    Anant GmbH

    The Anant GmbH is a marketing subsidiary for own products & representation for few well-selected Indian manufacturing units. We have a good knowledge + experience for quality systems & supervised manufacturing outsourcing from India. Our German representation offers a potential to take up a responsibility to supply the article as door delivered & being your contact/contract partner. whereas our Indian technical team offers possibly of economical in-house manufacturing as well as local outsourcing under our supervision & our own quality control. At Patel Technomation - India, We have the experience and capability of sub-contract CNC machining including supply/procuring of foundry and forging products in small batches as well in large quantity. We follow the TÜV SÜD ISO 9001-2000 quality system and are dedicated to providing excellent customer service, and the timely delivery of quality products. Our Manufacturing unit is located at major Auto-parts manufacturing, Casting, Forging & engineering hub in India; which offers us a good development possibility for any specific/special part manufacturing possibility in a most economical manner.
    > Read more
    Employees
    200 - 500
    Year of foundation
    2006
    Certifications
    ISO 9001:2015

    Watch

    Gröbmer GmbH

    The ... Vielfätigkeit of mechanical engineering. For 35 years, our company has been working in the engineering industry. Always the goal in mind, independent and flexible manufacture our workpieces and to expand our product range, we manufacture to the highest quality standards and precision. With a modern and versatile machinery, we offer our customers experience and commitment in the development and production of their mission. Our handicraft business with about 20 employees specializing in the manufacture of parts, components and assemblies; manufacture both single and serial production are possible. We process a wide variety of metals and plastics - from 3D - CAD - design to the finished product. We design and manufacture - take your product ready for installation in reception, thus saving costs and time. As an experienced Hertseller of turned and milled parts in machinery and mold with a variety of materials, we guarantee quality, precision and flexibility. With CNC machines from renowned manufacturers in the field of machining, we produce from prototype to series production of technically demanding parts with consistent quality in 2D and 3D. Our modern CNC lathes are equipped with automatic bar feeder, driven tools, Y-axis and sub-spindle, so they allow the individual and series production of complex parts in a single pass. New in our machine park is a 5 - axis "Millturn" machining center with which we completely finished workpieces in one set-up, which leads to a significant reduction of the idle times and the precision significantly increases. With corresponding 5 - a pallet exchange system and a total of 90 tool places, we are well prepared for series production. - CNC Milling - 3-D mold - Vermessarbeiten and quality control
    > Read more
    Employees
    5 - 10
    Year of foundation
    1978
    Certifications

    Watch

    ÖZTUG ENDÜSTRI VE OTOMOTIV A.S.

    Öztug manufactures rubber molded parts (with and without metal attachment), plastic injection molded parts (with and without metal attachment + 2K) and bent wire parts with its own tool shop. We are already working with well-known companies such as Toyota Boshoku ,Webasto Convertibles, Sew Eurodrive , WOCO, Stabilus GmbH, Hydac Filtertechnik, Conductix-Wampfler, Grammer (Bursa) and Kiel. Our services begin with the first hour of development and extend to series production. Thanks to our mold construction, we can produce prototypes at short notice. We are convinced that we are a suitable partner for you with our vertical range of manufacture and our high level of quality. 1990- Esatablishment; machine-free prodcution was realized. 1997- Rubber machinery investments were made. 2002- Toolshop investment was made. 2003- Plastic Injection investment was made. 2005- Production started in NOSAB. 2006- ISO TS 9001 Certificate was obtained. 2007- Production started in Adapazarı. 2011- ISO TS 16949 Certificate was obtained. 2013- Production started in HOSAB. 2018- IATF 16949 Certificate was obtained. 2018- Lean management working was started. 2018- ‘’design Center Approval’’ was obtained from the Ministry of Science,Industry and Technology
    > Read more
    Employees
    200 - 500
    Year of foundation
    1990
    Certifications
    IATF 16949:2016

    Watch

    Mario Fernando Group Srl

    Mario Fernando Group s.r.l. is an Italian company specialized in the cold deformation of metal sheet, in particular of stainless steel and aluminium. with over 50 years of experience in the planning and construction of high quality dies our aim is to become a model for the processing of metal sheet. We can realize dies for drawing, deep drawing, bending, trimming and blanking, according to the customer's drawing. Mario Fernando Group s.r.l. offers the mass production of metal stamped parts: the dies are realized according to our customers drawings and the production managed to meet the customer’s requirements. Our company proposes innovative solutions to the most complex technical problems becoming partner of our customer for the whole process of transforming an idea into a mass production work, even with the design of special machines according to our customers’ production needs, to give support that goes beyond the tool realization. This is what we mean with partnership. Our company is ISO 9001:2015 and and IATF 16949:2016 certified.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1967
    Certifications
    IATF 16949:2016

    Watch

    Goodwill Precision Machinery Ltd. ...

    Goodwill Precision Machinery Co.,Ltd (GPM),is a China manufacture established in 2004, Specialized in offering precision machining service for non-standard mechanical parts, spare parts, metal fabrication, precision welding, design & assembly, fixture and jigs with supplied drawings, prototype,CNC precision machining,customed machining parts...... Manage our company with ISO9001:2008 , TS16949 ,ISO13485 .ISO14001 certificated, customized ERP & Barcode Scan System. Our advantages: Easy to communicate in English,German,Japanese One Package Services Fast lead time Stable Quality Rigorous work attitude No quantity limited
    > Read more
    Employees
    500 - 1000
    Year of foundation
    2004
    Certifications
    IATF 16949:2016

    Watch

    Bechtold GmbH

    For over 40 years, we are now a well-known partner in the industry, the crafts, the exclusive trade, and selected service providers. We offer laser cutting from simple to complex assemblies highest quality solutions and deliver worldwide. Our great strength lies in the wide range of our manufacturing capabilities: For heavy machinery, precision parts or sophisticated decorative items - with everything we have years of experience. Our Services: - Laser cutting - Stamping - Nibbling - Edge - Welding (Approval DIN EN 15085-2) - Drilling / threading - Spot welding - Stud Welding - Rivets - Pressing - Mounting ... Our process chain we supplement with long-term partners to meet all requirements: In the foreground are surface treatments such as powder coating, wet paint, Kepla coat, polishing, grinding, and all galvanic coatings. Machining operations of all kinds, from the simple to the complex welding chamfer milling or turning part will be integrated into the production process.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1966
    Certifications
    EN 15085

    Watch

    Sichuan Ideasys Precision Machinery...

    Sichuan Ideasys Precision Machinery Co., Ltd. has more than 2000 square meters of production area, precision machining of various mechanical parts. The business includes wax loss precision casting machining, forging machining, die casting machining, bar, tube and sheet machining. Materials cover stainless steel, heat-resistant steel, carbon steel, low alloy steel, high temperature alloys, non-ferrous metals. With advanced production equipment and testing equipment, strong ability of mold and product design / production, casting production and precision machining. Sichuan Ideasys Precision Machinery Co., Ltd. is a engaged in products research & development as one of professional manufacture with rights of import and export. Main products: castings, forgings, precision machining parts, die casting, other mechanical parts and assembly parts for export.  Business services to the wide range of automotive, fluid chemistry, electrical fittings, medical equipment, food machinery, petrochemical equipment, engineering with assembly and so on. Company has nearly 20 stable customers and communities, products are mainly exported to North America, European Union, Australia and more than 20 countries and regions. With a strong human resources, advanced technology and equipment, leading technology, innovation and R & D team, quality service and modern management tools, honed through years of competition in the international market and become quality supplier of GE、BOSCH、Voestalpine、Audi、Foster Wheeler and many other well-known international buyers. With the "integrity first, service first" business philosophy and "innovation, pursuit of excellence," entrepreneurial spirit, we whole-heartedly welcome the world friends come to consult and negotiate business for mutual great development!
    > Read more

    Watch

    MA-MICROMEC SRL

    Ma-Micromec Srl, is a company specialized in the production of precision turned metal parts for industries of various sectors: automation, electronic-electrical engineering, plastic materials, pneumatic-hydraulic and many other sectors. Ma-Micromec Srl is a new company in the sector but is able to guarantee quality and reliability in production thanks to the skills handed down and acquired by past generations. The technicians, all highly specialized, make their experience available to be able to professionally produce products with high quality standards. Ma-Micromec Srl, thanks to the use of modern technologies, has the ability to produce high-precision articles made on CNC mobile head lathes and cams with a bar passage from 1.5 to 25 mm.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2015
    Certifications
    ISO 9001:2015

    Watch

    ADMET

    Comprehensive services in the field of: production of metal products; sheet metal and steel processing; welding; painting; galvanizing. We manufacture products and services for clients from all over Europe. Our clients include large, medium and small companies from various industries and sectors. Qualified and experienced staff and modern and extensive machine park guarantee high quality of products and services. We provide reliable service, fast contact and comprehensive maintenance services: - Manufacture of metal products - Metal sheet processing - Steel sheet processing - Welding - Painting
    > Read more
    Employees
    50 - 100
    Year of foundation
    2004
    Certifications

    Watch

    TECHNOMETAL-Orfanidis EE (lp)

    We provide machining services of unit parts, prototypes and short-run production. Problem-solving and provision of suitable machining solutions are what we do best. Our customers trust us because we are flexible with their enquiries and requirements, we deliver on-time and offer short- delivery times. This is what makes us stand out from the rest. The precision parts that we produced are known for its top quality, due to the raw materials used. Our experienced and passionate personnel carry a high sense of responsibility towards our customers and their product. We continue our expansion and growth, especially in technological developments. Our precision components are manufactured according to customer drawings, specifications and international standards. Design and production by reverse engineering method is also provided as a service. And finally, we offer competitive pricing, guaranteed!
    > Read more
    Employees
    10 - 20
    Year of foundation
    1986
    Certifications
    ISO 9001:2015

    Watch

    PRO CNC GmbH & Co. KG CNC-Fertigung...

    "A systematic approach to solution" The company PRO CNC GmbH & Co. KG was founded on 01.12.1990 by Michael Pfeiff under the name Michael Pfeiff. The company's headquarters was first in Varl and was moved in 1994 after Luebbecke. On 01.09.2003, the company was acquired by the current owner Volker Meier kink and then operated under the name Pfeiff toolmaking. Since 01.09.2013 we now operate under PRO CNC GmbH & Co. KG - Production Engineering and Mechanical Engineering. Mr. Meier is one kink with the company since the very beginning. The company PRO CNC GmbH & Co. KG deals with the full range of mechanical manufacturing (turning, milling, drilling, grinding) and the assembly of components and machines. Focus here is the contract manufacturing in the milling, especially the production of small parts. Cubic parts up to an edge length of 1000x600mm currently can be handled in-house CNC PRO GmbH & Co. KG. The company PRO CNC GmbH & Co. KG is able to deliver to the customer from the initial sample to mass production all.The range of parts includes the classic item to automobiles mass part. Is manufactured to eleven computer-controlled machine tools and machining centers the latest generation with up to four axes and two spindles. Some of the machines are equipped with rotary tables change. As a manufacturer, we would like to mention, among others, Bridgeport, Brother, YCM and Swabian machine tools here. The rotation range is among other things a lathe with driven tools, Y-axis and bar feeder (Biglia B650Y-turning diameter over bed max. 400mm) are available. Programming is based on dialogue and DIN controllers and by means of a CAD-CAM work on SolidWorks basis. Currently, the company PRO CNC GmbH & Co. KG two masters, a mechanical engineer, eight skilled workers, five assistants and a force in the commercial sector employs. The customer base includes about 30 customers from all sectors of the craft and the industry (electrical, mechanical, automobiles, pharmaceuticals, chemicals) in regional areas. Its customers include names like: VW, AEG, Federal Mogul, Faurecia (automotive sector) Harting, IMA, Kolbus, Oystar (engineering sector) VTG wagon Graaff, EuroMaint Rail (rail-rail vehicles) In May 2004, the company has been certified according to DIN ISO 9001-2000 since 2010, accordingly to DIN-ISO 9001-2008.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1989
    Certifications
    ISO 9001:2015

    Watch

    Puzonado y Láser METALKOR, S.L.

    Metalkor’s core competence is plate conformation, especially laser cutting. Metalkor was founded in 1999 and is ISO 9001:2015 certified. Around 35 employees work for the company in the Júndiz Business Park in Vitoria-Gasteiz in northern Spain. We offer contract manufacturing, from individual parts to large series. Thanks to our experienced staff and modern machinery, we can offer our customers integrated solutions in the following sheet metal working processes: - Laser cutting and punching in one operation - Shearing and bending CNC - NC cutting and pressing - MIG and TIG welding. - Robotic and precision welding In addition, we also take care of the final processing of the metal parts: - Galvanised, zinc plated, brown burnished, tempered and painted (epoxy or liquid), etc. If necessary, we organise the transport of the products to our customers. Further information can be found at: www.lasermetalkor.com
    > Read more
    Employees
    20 - 50
    Year of foundation
    1999
    Certifications
    ISO 9001:2015

    Watch

    PMT GmbH

    Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials. We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more! We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2005
    Certifications
    ISO 9001:2008

    Watch

    Qingdao Compass Hardware Co.,Ltd.

    We are manufacturer and exporter of customized parts, with machines in turning, milling, casting, stamping, welding, ect.. Located in port city Qingdao, it's convenien to arrange shipment no matter by sea, by express or by air. Welcome to contact us if you have inquiries, professional team will help with what you need.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2010
    Certifications
    ISO 9001:2015

    Watch

    FERRINOX S.R.L.

    Ferrinox was founded in 1967 from the entrepreneurial initiative of the Ferro family. Our company is specialized in metal sheet processing especially for laser-cut, punching, folding, moulding, welding and surface treatments of stainless steel, iron and other metals. Thanks to our know-how and our machines of the last generation that are constantly updated following the latest technologies, we are able to supply our customers with top-quality products and service. We have a wide experience especially in these applications: metal-sheet components for electrical appliances, frames for electrical appliances, metal-sheet components for the lighting and ship-building industries and industrial gastronomy.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1987
    Certifications
    DIN EN ISO 3834

    Watch

    Rehm Blechtec GmbH

    Metalworking The manufacture of fabricated metal products for innovative industrial applications requiring the highest standards of quality and absolute precision. to have a reliable partner on the side is more important. Rehm BlechTec has over 25 years specialist in metal and sheet metal processing. Our manufacturing techniques and lasers punching, forming, tube processing, welding and surface treatment is as much as the design and development of customized solutions. For the high-quality metal processing, we have an extensive range of machinery with modern equipment.
    > Read more
    Employees
    50 - 100
    Year of foundation
    2003
    Certifications
    DIN EN 1090

    Watch

    Berma Plaatwerk BV

    Sheet metal specialist Blech Berma is an all-round provider for sheet metal and lightweight construction from prototypes to medium series. The production of our core consists of laser cutting, punching, folding and welding. We also offer many auxiliary processes such as spot welding, rolling, inserts, saw grains and drums. Berma is also a real all-rounder when it comes to materials: from 0.5 to 12 mm, steel or stainless steel with brass or up to pre-painted plate, Berma has experience and in most cases also at home. We also handle a lot of pipes, tubes and profiles. Because we, we cannot have a wide range of products for our customers specializing in a limited number of operations or certain materials. That's why Berma Blech is your specialist for all-round sheet metal.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1986
    Certifications
    ISO 9001:2015

    Watch

    WKK Kaltbrunn AG

    WKK Kaltbrunn AG - enormously in form The beginning of the WKK Brunn AG is founded in 1967. As a dedicated tooling the company had at that time only one purpose: the production of cutting, bending and forming tools. Shortly thereafter, the fabrication shop was put into operation and some ten years later, the company introduced her first own product. By continuity, innovation and perfection was out of the formerly peaceful Toolmaking a successful SME with about 45 employees.Today, the CHP is an international punching operation with most modern manufacturing methods in the supplier sector. enormously complete - from the first idea to the final series, we offer comprehensive services - Consulting: individual and professional, on-site or at our - Construction: in-house with 3D Autodesk Inventor - Prototyping: short to illustrate your ideas - Tool: for punching tool and teaching building, with modern machinery - Series production: stamping products of all types up to 250 tons of pressure and up to 300 mm width at 3 mm thickness (up to 5 mm after consultation) made of steel, stainless steel, non-ferrous and light metals - Component manufacture: Total manufacturer of your products, automated assembly - Post-Processing: Heat and surface treatments for partners near - Finish machining: by machining (milling, turning, drilling), eroding and vibratory finishing - Did you know? Also welding
    > Read more
    Employees
    20 - 50
    Year of foundation
    1967
    Certifications
    ISO 9001:2015

    Watch

    SBS Group

    We, the SBS from Aalen, have been offering - in the truest sense of the word - precision in series for over 35 years. Founded by Friedrich Bollheimer, the company is now in the third generation. SBS combines the individuality and flexibility of a family business with distinctive technical know-how and the latest CNC production technology in the areas of turning, milling and assemblies. We provide our customers with advice from the manufacturer's point of view, from the prototype to the series of component parts, via an efficient supply chain. In addition to our high-quality machinery, we also have an assembly department. In addition to the production of precision components from prototypes to series parts, we take on complete process chains for our customers through to the implementation of system solutions. This enables us to offer you ready-to-install solutions. TO PLAN. TO DEVELOP. TO EDIT. TO USE. SBS.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1985
    Certifications
    ISO 9001:2015

    Watch

    INSTALO BG

    Instalo BG Ltd is a manufacturing company already known as a reliable partner in the production of tailor made equipment and metal fabrication subcontracting. The continuous interaction between our R&D, production planning and quality ensures to our customers innovative and winning solutions. Investing in state-of-the-art technologies, modern organization on quality, environmental and safety issues, today we can cooperate with big multinational companies in our markets of reference. In order to meet customer needs we elaborate and deploy ourselves in the following fields: • Subcontracting sheet metalwork • Mechanical and electrical assembly �� Design and production of custom-made equipment • Engineering consultancy services Our range of final products are applicable in the environmental engineering sector as follows: • Municipal, industrial and potable waste water treatment plants • LandfillS for municipal solid waste • Steel metal fabrication Our staff expertise gained by practical experience helps us understand every project needs. Therefore we at Instalo BG try to keep high standards in: • Equipment support at design stage in process and engineering matters • Innovative methods and resource flexibility • Processing of relevant engineering documents • Project engineering department equipped by 2D / 3D CAD workstation. • Development of structural projects by means of FEM tools Our machine park works in compliance with environmental requirements with regard to functionality and we do try to use the optimum materials with efficient operation of equipment: • Plasma cutting machine • Laser cutting machine • Deburring machine • Roll bending machine • Bending machine • Welding machines • Lathe, turning and milling machines • CNC machining • Cutting machines The goal of INSTALO BG is to provide our customers efficient, reliable and innovative solutions, competent advice and reliable services. Thanks to our skilled staff we are able to propose to our clients experience, knowledge and vision of our design and construction activities.
    > Read more
    Employees
    20 - 50
    Year of foundation
    2010
    Certifications
    ISO 9001:2015

    Watch

    Aloys Kleier GmbH & Co. KG

    The owner-managed company Aloys Kleier is a service company in the field of small-scale component manufacturing, hardware and electrical installation. As a cooperation partner of the industry, we bring by screws, rivets, welding and gluing together on 4000 m² of production space, what belongs together. In addition, our staff have many years of experience in the fabrication and installation of staircases, ramps and railings, pipelines, metal and welded constructions of all kinds Our range of services is complemented take over all activities of a classic Metallic, ie including sheet metal and metal processing including welding, Kant, drilling and sawing and we done quickly and efficiently. The customer gets to us all from one source. We service the products from purchasing to warehousing, manufacturing, assembly, logistics and all emerging problems. Flat hierarchies fast communication and flexible production methods are guaranteed. All orders we carry uncompromising from the complete satisfaction of the client. Partnership based on trust and maximum quality form the common success for both sides and are the basis for a long-term cooperation.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1982
    Certifications
    DIN EN 1090

    Watch

    Viewtrade is Part of Viewsoft Srl

    Consortium of companies operating in the development of foreign markets. It acts as sales department for the export of a number of small medium-sized industries located in the Veneto region, all operating in the sub-supply in the mechanical industry. Our partners can offer, among others, the following main operations: • Turning • Milling • Grinding • Gear Making • Cutting and bending of sheet metal • Sheet Metal Forming • Assembly • Complete Subassemblies Operative Office in Corso Fogazzaro - Vicenza IT
    > Read more
    Employees
    20 - 50
    Year of foundation
    2011
    Certifications
    DIN EN ISO 3834

    Watch

    Kreutz & Mock GmbH

    About us Kreutz & Mock is a medium-sized company and the leading manufacturers of wire bending parts of all types. With over 3000 different articles we can offer our customers a wide and diverse range of different wire products. The necessary machines for the production are developed and built in-house by our own engineering department which gives us the possibility to always be flexible according to our customer's needs. You can find further details about us and our philosophy on our website. Products We manufacture wire bending parts in all sorts of variations and models. We supply many industries with our products like the automotive industry, construction industry, agriculture, blinds manufacturers and many more. We also have numerous technical bent parts in our repertoire. We are happy to try to achieve your specific needs and requirements, because quality, punctuality and being in step with actual practice are our basic principles to deliver high quality as well as best functionality products. It does not matter whether they are single quantities, small quantities or a large series. We are flexible and deliver quality at fair conditions. We offer + Qualitycertficate DIN ISO 9001:2008 + in-house specified tool construction + in-house machinery construction + quick production of samples + technical and experienced know how + skilled telephone service + large production spectrum Materials Every material processed in our factory has a dedicated inspection certificate that will be provided with your delivery on request. We manufacture bent wire components for you in all variants and materials. Here a selection of the materials used: + Stainless steel wire 1.4301, 1.4310, 1.4362, 1.4401, 1.4404, 1.4571 in different tensile strengths + Spring steel wire 0.9 mm to 6.0 mm. Qualities A, B, C, D + Steel wire C9D bare or copper-plated. C9D soft galvanised in 1.0 mm to 8.0 mm + Crapal wire + Becrosi valve spring wire + Silver and Palladium wire
    > Read more
    Employees
    20 - 50
    Year of foundation
    1934
    Certifications
    ISO 9001:2008

    Watch

    Koutsogiannis LTD Steel Workshop

    Koutsogiannis LTD – Steel Workshop was founded in 1994 by Mr. Koutsogiannis and Ms. Christofi. The company has been active for 24 years in the fields of mechanical engineering and repairs, emphasizing in the high quality and fast delivery times. We are a company overlooking the sea, just 10 km from the port of Volos and above us the Mountain of Centaurs. We are a small team. Titles and positions are of secondary importance for us. Fostering long-term relationships with a diverse mix of latest technology and highly skilled employees. Building on our long experience and in-depth know-how proven in numerous reference projects. Team spirit is lived every day. We pull together in the same direction. Together we have overcome any economic crisis. We have no perfect marketing, but great products and a good advice for our customers. Our success is confidence in our people and not their control. Quality is the pride of every employee and not just a corporate goal. A machining piece which is supplied to the customer is at first a piece from Kostas, Giannis, Nikos etc., and only secondarily one from Koutsogiannis LTD. Customers are our friends and partners. Each employee is responsible for the future of Koutsogiannis LTD.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1994
    Certifications
    DIN EN 1090

    Watch

    TME Maschinenbau GmbH

    Since its inception in 1999 we have specialized in the manufacture of parts and series in the area of turning and milling, and are active throughout Europe. Regular investment in new technologies and manufacturing capabilities ensure optimal quality and customer satisfaction. Good Quality begins with a high-quality production equipment, efficient processes and a clear structure. Continuous development is the foundation of our success. We employ 35 employees in administration, construction and manufacturing. Join our 4 trainees for precision mechanics and in administration. The cooperation with TME is open, direct and uncomplicated. Our clients include companies in the areas of: Engineering, tooling, laser technology, and aerospace and automotive industries. Service overview Production / manufacture of components We manufacture parts, spare parts and small series to mass production according to your drawings or a pattern. Our machining capabilities include CNC-controlled milling, drilling, turning, wire EDM, surface grinding and conventional crafts and sheet metal processing. We can use our processing centers, parts machining, up to the size: L = about 2100, W= about 1000 B =, H = about 600 and up to a weight of 6500 lbs. Construction Design of tools, fixtures and equipment. 3D modeling for prototyping. Support for design tasks and advice on cost-effective and production-oriented manufacturing of your parts during development. CAD / CAM Acquisition and processing of all popular file formats such as : STEP, SAT, IGES, DWG and DXF programming with our CAM system. Welding / Heat treatment The welding of steel and heat treatment (hardening, tempering and annealing) are also of parts of the scope of our processing. Surface treatment Surface treatments, we can perform at our partner companies. Assembly Assembly of parts, components, tools and equipment. Reports On request, we create initial sample inspection reports and test protocols. Delivery We deliver your products on time with shipping or parcel service. We are a professional partner, trust TME!
    > Read more
    Employees
    20 - 50
    Year of foundation
    1999
    Certifications
    ISO 9001:2008

    Watch

    Hermann Sefranek GmbH & Co. KG

    The company Hermann Sefranek GmbH & Co. KG was founded in 1885 and is now run by the fifth generation. The company is specialized in sheet metal processing. The product range includes parts for suction, ventilation systems, pipes, special sheet metal parts and weldments. The possible processing methods include laser and plasma cutting, punching and nibbling, edges, and much more rounds Are processed steel, stainless steel, aluminum, titanium, copper, and other materials. We are happy to advise you in the design of components or construct them for you. With SolidWorks 2010, we have a powerful CAD system with which we can process all common file formats.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1885
    Certifications
    DIN EN 1090

    Watch

    ELHA-MASCHINENBAU Liemke KG

    about us With the name LH (later ELHA), which is composed of the abbreviation for "Liemke Hövelhof", a company for the manufacture of machine tools for the wood and metal processing industry emerged around 1930 from an electrical trade. Today we are known for tailor-made machining centers, special machines and production modules. Many industries, including slewing bearing manufacturers, automobile manufacturers and their suppliers trust our experience and competence in the development and implementation of highly productive machining processes as well as the design and manufacture of mostly metal-cutting machine tools and turnkey solutions. Our 240 employees work responsibly on the constant improvement of product and service quality in order to guarantee reliability and maintainability. The satisfaction of our customers but also of our employees are our top priority. ELHA machines and manufacturing solutions are highly productive, reliable, high quality and durable. Our employees are enthusiastic professionals who accompany every step of your planned investment far beyond commissioning. We will provide you with the enthusiasm for the solution.
    > Read more
    Employees
    200 - 500
    Year of foundation
    1930
    Certifications
    ISO 9001:2015
Limit search by:
Region
Technologies
Materials
Company data
Industries
Certifications