1211 Suppliers found
List
Raster
Map
Sorted by 
Go to watch list 0

    Watch

    Rommel Präzisionsdrehteile GmbH

    Production of rotationally symmetrical rotational parts 12-65 mm in diameter from all machinable metals. Our specialty is the machining of stainless steel materials (from 1.4021 to 1.4571). Sample parts can be found at: www.rommel-praezisionsdrehteile.de In modern CNC lathes with Alligator - Spindle or counter-rotation symmetric turned parts from a variety of metals are produced. These high demanding precision turned parts are manufactured according to customer requirements as a single series parts or assembled into smaller modules. Typical batch sizes of 100 - 30,000 pieces. Processing options - CNC turning - Polygonal - Eccentric rotating - Milling - Drilling, reaming - Threaded drill, chasing - Knurling Heat-treatment - Hardening, pay etc (see services) Suitable materials are - VA of 14021 to 1.4571 - Machines Bright Steel - Quenched and tempered steel - Stainless Steel - Brass - Aluminium - Special materials such as titanium Touch up - Install - Vibratory Finishing - Deburring Surface treatment - Galvanize - Nickel - Chrome plating - Brown - Phoshatieren etc (see services) - Vibratory Finishing - Deburring Are conditionally suitable - Refractory materials - Heat-resistant materials
    > Read more
    Employees
    10 - 20
    Year of foundation
    1928
    Certifications
    ISO 9001:2015

    Watch

    Henan HongYu Special Castings Stock...

    Henan Hongyu Special Castings Stock Co., Ltd. is a Hi-tech enterprise specializing in producing large wind turbine parts and other special kinds of iron & steel castings and the parts. The company was established in 1999, the existing staff in the company is total 560 employees at present and 82 professional engineering technicians among them. It covers an area of about 160,000m² ((in which the production area is about 60,000m2). The maximum production facility in our company is 30T intermediate frequency furnace, which is the biggest in domestic foundry for Wind Power industry. We can manufacture and supply all kinds of castings and parts for up to 3~6MW wind turbines. The annual production capacity is about 30,000 tons at present, and the maximum weight of our cast iron products is 50,000 kg per casting. Along with the rapid developing, our company newly built a machining base near our company in 2008. We also purchased and installed many large CNC machining centers with high accuracy class. we also simultaneously equipped with large heat treatment facility and shot blasting & cleaning machine and sand blasting machine and special paint spraying and varnish stoving room and other facilities. Since 2005, our company began producing the wind power parts for many gearbox companies and wind turbine manufacturers at home and aboard, such as Hub, Base frame, Carrier, Bearing housing, Motor housing, Main shaft(input/output shaft), Torque support(torque arm), Planet carrier(with material of ductile iron and/or low alloy steel), Gear housing, Sealing cover and other low-temperature ductile iron castings & parts. Just at the moment, we are producing and supplying the 3MW wind turbine parts for a famous company in domestic wind power industry. Since the foundation, our company was awarded Excellent Casting Industry Enterprise many times in the past. Especially, our company was the unique new and high technology enterprise in Henan casting industry. In 2005, our company was awarded the second prize of the Scientific-technical Progress in Henan Province. Our Engineering Research Center was approved as “Henan Province Enterprise Technical Center” in 2008. In 2009, our company became one of Model Enterprises (Total 3 enterprises in China) in Applying National Green Cast Criterion. Besides widely used by many popular domestic companies, more than half of our products are exported to Germany, France, UK, Netherlands, Spain, Italy, Czech, USA, Canada, Japan etc. Essential Inspection facilities or methods: Photovoltaic direct-reading spectrometer, Carbon & Silicon thermal analyzer, Chemical analysis, Metallographic Analysis, Mechanical properties testing, Casting Dimension inspection and 3D(three-dimensional) measuring instrument for the part’s dimension check, Moulding sand testing, Magnetic particle Testing(MT), Ultrasonic Testing (UT), Dye penetration testing, Hydrostatic Testing, etc. Quality assurance: ISO9001-2000, PED 97/23-EC, AD2000 W0. Company quality policy: Customer oriented and continuous improvement in quality management system, to manufacture the most satisfactory products with our wisdom and power.
    > Read more
    Employees
    200 - 500
    Year of foundation
    1999
    Certifications
    ISO 9001:2008

    Watch

    Franz große Rebel GmbH & Co. KG

    As a medium sized company, we operate very successfully since 1998. Thanks to our highly qualified staff and the most modern production machines, we can refer to a number of satisfied customers, which include well-known companies regionally and nationally count. We produce turned and milled parts of high precision. Our materials are plastics, metals, aluminum and other materials. From our manufactured parts are used in the industry, the recycling industry, the construction industry, craft and in many other areas where top quality is paramount. We offer CNC technology in contract manufacturing - general engineering parts, boring work to heavy duty cutting. Due to our ongoing schedule monitoring, we ensure compliance with the specified dates, because quality and delivery are our highest priority. Through ongoing investment we make for a good and new machinery.Our very good and motivated employees in connection with this machinery are the basis for our continued success. Since May 2007, most of machining with a Kekeisen UFF (United Machining Center): Universal Travelling column milling machine for large parts UFF and shuttle machining X-axis: 1 - 12000 mm (longitudinal) Y-axis: 1 - 1400 mm (transverse) Z-axis: 1 - 1800 mm (high) We are equipped for for heavy and very heavy work pieces. CNC - Milling With our CNC mills, we can meet almost all requirements in order for your needs To finished parts. With our extensive range of tools we have grown virtually any task. Aufpanzertechnik This method is often used in the recycling industry. Also in the construction industry, in the high wear is commonplace, hard facing has a high priority. Due to wear of lost material is applied again.Particularly hard and highly wear-resistant materials prolong the service life and thus help save costs. Flame spraying technique By flame spraying to run-in bearing seats on shafts and rough surfaces of sealing seats renew easily. The melted metal powder can be applied up to 3mm thick. Flame spraying is also suitable for the application of corrosion protective layers of plastic.
    > Read more
    Employees
    5 - 10
    Year of foundation
    1989
    Certifications
    ISO 9001:2008

    Watch

    U. Eitner Formenbau, Erodier- & Kun...

    U. Eitner Tooling, EDM & Plastic GmbH Benzstr. 7 D-64807 Dieburg Ask us! For over 25 years we have manufactured to approximately 1500m ² and bearings on 1000m ² Tool and die All equipment needed for tool available eg Senk - and Wire EDM. Max 3T tool Total weight approx 25 Tools / year Engineering and CNC machining 4 CNC lathes and machining centers 4 Milling: Max X1800 - Y750 - Z750, 3, 4 and 5 axes. Rotate: Max diameter 800mm Plastic injection molding 10 Arburg injection molding machines, max. 150T, fully automated. Automotive, electrical and thermal engineering about 30 million plastic parts parts per year.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1985
    Certifications
    ISO 9001:2008
    TP Suche Banner

    Watch

    MBT Herrous GmbH

    The MBT Herrous GmbH looks back on 18 years of development. You will find us in the heart of Swabia Lands in Schorndorf near Stuttgart in the Rems valley. With the move to Schorndorf in June 2011, the machinery was modernized again and logistics improved, so that now orders can be processed in a timely manner in large batches. We specialize in the production of sophisticated turning and milling parts: a small series from about 100 parts and medium series with lot sizes to 10,000 pieces. We supply you with both pure subcontracting as well as pre-finished turning and milling parts with heat treatment or coatings. Our customers include well-known companies in engineering, engine construction as well as the weapons and equipment technology and industry. Quality: Our measurement room is equipped on the current state of the art with all the usual measuring equipment. For high precision and complex parts, we are also equipped with a hand-held 3D measuring machine of etalon. Qualified Employees: Our qualified staff are a guarantee for an efficient and high quality production. At about 500 square meters of production space we manufacture on modern CNC machine precision parts. If required, our work in shift workers to do your orders in a timely manner! Perfection, precision and reliability are essential components of our philosophy. Customer satisfaction is our motto!
    > Read more
    Employees
    10 - 20
    Year of foundation
    1995
    Certifications
    ISO 9001:2008

    Watch

    Iovine High Tech srl

    Thanks the high technological machinery, we the Iovine High Tech Srl, operate since 1970 as a supplier in the field of mechanical precision machining; We offer technologies such as grinding, drilling, turning, and are particularly specialized in milling. We can offer this both as a complete delivery as well as operations. We work with drawing parts in medium size (max. 1 meter), where particular finishing’s are in higher accuracy required with very small tolerances. OUR MACHINERY CONSTITS OF: No. 6 CNC Drilling No. 4 CNC milling machines No. 5 CNC lathes No. 3 CNC grinding No. 1 Meassuring tool Tesa micro-Hite 3D One of our best machine is the MCM (machining centre manufacturing) 1200 Clock, costruction year 2016, with the following technical features: Number of axes: 4 Axes Stroke: 1.200mm x 850mm x 850mm Pallet Dimensions (mm): 630x630 / 630x800 Rapid feeds (m/min.): 75,0 Rotary table - number of positions: 3.600.000 Rotary table – rotating speed (rpm): 50 Tool taper: ISO 50 / HSK-A100 Max torque (Nm): 372/372/0 Power (Kw): 58,5/58,5/0,0 Spindle rotating speed (rpm): 8.000/14.000/0 Linear axes measuring system: pressurized Heidenhain optical scales Rotating axes measuring system: pressurized Heidenhain encoders Vertical continuously rotating table: Yes Being on the market for many years, Clock 1200 ensures high precision, speed and reliability. The X axis guide on two different levels makes the carriage unit extremely rigid, globally increasing machine performance and cutting volume. Equipped with the vertical continuously rotating table, Clock 1200 can turn into a multitasking machine capable of turning, milling and grinding. This machine has a tool magazine with 500 seats and a pallets magazine with 60 seats. We have the coordinate measuring instrument 3D Tesa Micro Hite, Year, 2014. OUR QUALITY: We have tools to ensure the quality of products in terms of standardized control plans. For special needs, we are able to use the quality requirements that have been agreed with our customers. The company is certified according to ISO 9001: 2008.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1970
    Certifications
    ISO 9001:2008

    Watch

    Hanf und Erdmann

    The company manufactures hanf and erdmann for 20 years precision turned and milled parts. Most modern programming and production technology to high-quality equipment, with its own delivery service. Volume production and prototypes, also Kleinsereien.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1996
    Certifications
    ISO 9001:2008

    Watch

    Righi Viliam Srl

    Founded in 1966, Righi Viliam from Artisan Workshop has gradually evolved to technologically advanced company for the production of prototypes and series production. In the 90s a new corporate image and accelerated technological renewal allowed the loyalty with leading global conglomerates. The path that continuously combines mechanical concepts and technological innovation continues today. For over 40 years build quality mechanical components; reliability is measurable in the product, in terms of delivery, the design collaboration, in helping the product and in the continuous search to improve it. Our mission and our commitment: • build precision mechanical components with skill and great attention to detail. • Check statistically process to serve global markets. • meet the delivery dates without compromise • optimize costs and share solutions. • Always respond to customers and respect the employees by involving them in the stages of evolution. • respect the environment even with the new photovoltaic system in clean energy. Our structure supports you in business • Commercial as a first approach to new components and new customers. • Technology to be applied to the evolution of the product from the production prototypes. • The quality and total reliability, with statistical and monitoring testing process. • Laboratory for metrological control with the most modern measuring systems from 3D Zaiß to MYTUTOYO Roundness, Hardness Galileo .... • The planning of assembly lines and supply for certain confirmations without delay and without compromise. • Of logistics, ensuring that the travel product in the world safely and that can get right on the assembly line. • The technology is constantly changing and we with it • Robotic systems for production capacity and certain • Multi-tasking machines to optimize the quality of the process • Work environments to human scale to the repeatability of the product applications: • We manufacture mainly components for tractors, excavators, trucks and sports cars • Present the following overall organs •transmission • gearboxes • lifting bodies, �� engines machining: • steel components, cast iron, aluminums.. • dimensional range from 5 mm to 500 mm • The tolerance fields have range up to 0.01 mm • Processes of thermal and galvanic treatments -Treatments Anti-contamination and anti oxidants Righi Viliam SRL with its machine tools of the latest generation CAD CAM connected to and controlled by computerized measuring systems statistically guarantee of reliability and service to customers, judging reliable partner. Present since 1967, propelled by evolution and professionalism we can look to the future with optimism.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1967
    Certifications
    ISO 9001:2008

    Watch

    LABMAT S.C.

    The company Labmat was founded in 2006. We are a powerful small business in the field of CNC cutting technology. With our machinery, we are able to meet diverse customer requirements in the area of ​​machining of all metals and plastics at any time. Whether in single or series production, whether small or large production runs: Our employees manufacture your parts according to drawing or model. To optimize our performance, we rely on the proven cooperation with companies that have specialized in heat treatment and electroplating. We manufacture for customers from home and abroad. Simply get in touch with us, we're here to help. We specialize in the manufacture of: 1 Management systems, guide rollers, pins and bolts 2 Pipe sockets, junction sleeves and flanges of all kinds 3 Components for the hydraulic oil such as pistons, guide bushes, 4 We assume the assembly of manufactured items With our effective technology and unsrerem extraordinary commitment, we help our customers quickly and efficiently implement your wishes into reality. The components manufactured by us are used in many industries and major projects.
    > Read more
    Employees
    5 - 10
    Year of foundation
    Certifications

    Watch

    Pillen Group

    Pillen is sinds 1956 van oorsprong ontstaan in de toelevering van fijnmechanische onderdelen. Inmiddels is door de decennia heen Pillen ook doorgegroeid als toeleverancier in de plaatbewerking. Gerenommeerde merken en organisaties van klein tot multinational behoren tot onze klantenkring en kiezen voor de solide no-nonsense organisatie cultuur van Pillen. Verspaning & plaatbewerking onder een dak Vanuit Lichtenvoorde (NL) beschikken wij over meer dan 15.000 m2 productieoppervlak verdeeld over verschillende productielocaties. Wij zijn in staat om u te ontzorgen in de toelevering van verspaning & plaatbewerking. Ook behoren assemblages vanuit onze eigen assemblagefaciliteiten met ondermeer een ESD vloer tot de mogelijkheden. Eigen engineering & diverse certificeringen Wij beschikken over een eigen engineeringafdeling waarin software systemen zoals CAD/CAM (Solidworks) de ontwikkeling en voorbereiding van uw productvraag ondersteunen. Binnen ons kwaliteitsmanagement beschikken wij over verschillende 3D meetmachines waaronder een Mitutoyo Crysta Apex S voor grote werkstukken. Als specialist in de toelevering van veeleisende industrieën zoals bijvoorbeeld de Gas & Offshore industrie beschikken wij over diverse certificeringen waar ook u uw voordeel op het gebied van betrouwbaarheid en kwaliteit kunt halen. Certificeringen - ISO 9001:2008 - ISO 3834-2:2005 - Herwaarmerken G0304 - PED Directive 97/23/EC Wat kunnen wij bieden in de fijnmechanische industrie & plaatbewerking? CNC-frezen - Diverse 24/7 bewerkingscentra - Gerobotiseerde productbelading - Highspeed 30K n. - Horizontaal/verticaal - t/m 6-assig simultaan - 1500mm x 2500mm x 1500mm - Kotteren t/m ø1000mm - - 2-10 pallet machines voor 24 uurs verspaning - - In line Renishaw feedback CNC-draaien - Gerobotiseerd/Gauntry - Draai/frees combinatie - Automatische stangaanvoer tot ø65 mm - Tot ø670mm CNC - Tot ø1000mm en 6000mm lengte - Conventionele mogelijkheden - Bijzondere verspanende bewerkingen (Brootsen, Spiebaansteken en Draadrollen) Plaatbewerking - Ponsnibbelstraat 24/7 - Poedercoating in company - CNC Laser snijmachine tot 20 mm plaatdikte - Kantbank en persopstellingen Certificeringen & Quality management - Diverse ISO-certificeringen, Omstempelingsbevoegdheid, Gecertificeerd lassen - Grote meetcapaciteiten: 1200 mm in de X-as, 3000 mm in de Y-as, 1000 mm in de Z-as Montage faciliteiten - Meer dan 4000m2 montagefaliciteiten - ESD montage vloerlocaties
    > Read more
    Employees
    100 - 200
    Year of foundation
    1956
    Certifications
    ISO 9001:2008

    Watch

    Georg Nieder OHG

    Rotary- and milling parts from 3mm to 300mm Materials: all plastics, brass, aluminum, cast-metals, steels of all alloys, high-grade special steels rust- and resisting acid Surfaces: all galvanic and chemical coatings, all heat-treatments, inductiv-hardening, circular grinding, face grinding, polishing, abrasive blasting Fine-machining of cast-iron and injection-moulded parts Grinding of plastic rods up to 65mm and 3000mm length
    > Read more
    Employees
    20 - 50
    Year of foundation
    1920
    Certifications
    ISO 9001:2015

    Watch

    SITEC Industrietechnologie GmbH

    The scopes of business - Assembly systems - Laser lines - EC lines and fixtures - Proces control - Process and manufactoring data logging - System components in small and large series
    > Read more
    Employees
    100 - 200
    Year of foundation
    1991
    Certifications
    ISO 9001:2008

    Watch

    NURSAL MAKİNA

    NURSAL Makina is a manufacturer & exporter company. We are specialized in sheet metal fabrication. Our core business is welding Our capabilities: - Laser cutting & bending - Press forming - MIG/MAG, TIG - Pipe, profile bending & cutting - Powder coating - Wet painting - Chrome plating, electro galvanizing, hot dip galvanizing - Machining & grinding We have a wide range of products including tanks, barriers, platforms, guards, conveyors, stairs, cabinets, frames, machinings etc. Our target sectors: Construction, Automotive, Hydraulics, Textile, Agriculture, Marine, Offshore For more information about our company you may take a look at our website www.nursalmakina.com/en/.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2014
    Certifications
    ISO 9001:2008

    Watch

    Torneria Automatica Gianni Ricci S....

    Workings begin with co-design together with the customer, continuing with the in-depth study of the work cycle, the choice of additional materials and treatments to be carried out to the realization of the prototypes. Production is supported by careful process control. In addition, all stages are interwoven with washing machines performed with ultrasonic machines to avoid any residue inside. The packaging and shipment arrangements are made according to the specific requirements of the customer, thus guaranteeing the absolute protection of the product.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1971
    Certifications
    ISO 9001:2015

    Watch

    Bartek CNC Ltd.

    The company Bartek CNC s.r.o. is based on a long experience in precision machinery production extending up to 1998, and since that year the company became a trade. The core element of our production is custom manufacturing of a parts and assemblies for any industry. Throughout the whole time of production, the firm has been producing precise and high-quality parts in compliance with customer’s satisfaction. The basic production technologies are: • CNC-milling • turning • drilling • material cutting • assembly
    > Read more
    Employees
    5 - 10
    Year of foundation
    1998
    Certifications
    TP Suche Banner

    Watch

    Zhengzhou Sebon Heavy Machinery Co....

    Zhengzhou Sebon Heavy Machinery Co. , Ltd was founded in 1993, covers an area of 180000 squares meters totally. Specialized in precision casting, investment casting/ lost wax casting technology, our casting products are widely used in instrument components, marine hardware, construction hardware, valve and pipe fittings, automotive parts, train and truck accessories, and mining machinery parts. The casting productions are based on four Silica sol casting production lines with advanced international level, and the main processes are completed in constant temperature environment, this ensure we could manufacture your casting products with high precision. Specification: process with given samples or the drawings Standard: ASTM, AISI, DIN, BS and JIS Main precision casting materials: SUS304 (CF8), 304L, CF3, SUS316 (CF8M), 316L, 17-4ph, ZG1Cr18Ni9Ti, 42CrMo, 35CrMo, WCA, WCB, WCC, etc. Equipment: Single station wax injection machine, horizontal automatic double station wax injection machine, slushing machine, dewaxing kettle, roaster, medium frequency induction furnace, CNC machining center, spectrum analyzer, coordinate measuring machine, etc. Post-processing: noisy hand spray, pickling, heat treatment, precision machining, brushed or mirror polished, electro-polished Test: impact test, chemical analysis, metallographic inspection, hardness test, elongation test Product weight range: 0.5 kg to 100 kg Dimension Tolerance: CT7 Surface Roughness: Ra6.4~12.5 Productivity: 5000 tons per year If you are interested in investment casting parts, SEBON is a good casting partner. Welcome to send email to us. sales3 @seboncasting.com
    > Read more
    Employees
    100 - 200
    Year of foundation
    Certifications
    ISO 9001:2008

    Watch

    MASCELLANI SRL

    The company Mascellani operates on an area of 3,000 m², of which 1,500 are covered and had 2015 a turnover of € 2,700,000. The company has 20 employees in the following areas: 2 employees in administration; 2 employees for loading the production lines / management suppliers / tools, etc. 1 Employee in Supply Chain Management 1 employee in the field of quality 1 employee in the warehouse 13 employees in the production Our employees take care of all aspects of the product, from the procurement of raw materials to the packaging and dispatch of the goods. We offer amongst other things the following services: - Thermal and galvanic treatments - Grind - Pre-assembly - Sectional cut - Assemblies and assembly We perform quantity planning with weekly deliveries. The company has been certified according to ISO 9001: 2008 since 2008. Our machine fleet consists of the following machines: - 5 STAR rotary lathes; - 4 turning machines DMG MORI-Sprint 42; - 12 turning machines BIGLIA Bi-Bi spindle turret and Y axis; - 2 lathe Mori Seiki bi-bi-spindle turret and Y-axis; - 2 forage loaders; - 1 Daewoo vertical machining center with pallet changer; - 1 Vertical Machining Center Haas with 4th axis. Measuring instruments: - Measuring machine VISION OPTICAL SCANNING; - three-dimensional measuring machine Mitutoyo; - roughness meters, instruments for measuring the heat; - profile projectors; - hardening agent; - Borematic etc. We provide process control. This can include: Process Control, CPK, PPAP. The company is focused on environmental sustainability with a photovoltaic system and various measures to reduce the impact on the environment.
    > Read more
    Employees
    10 - 20
    Year of foundation
    1959
    Certifications
    ISO 9001:2008

    Watch

    mühlbauer MASCHINENBAU GmbH

    > Read more
    Employees
    100 - 200
    Year of foundation
    1973
    Certifications
    ISO 9001:2008

    Watch

    WDF GROUP LIMITED

    WDF is a manufacturer in China, specialized in making precision metal parts, plastic injection mould, bakelite mould and zinc-aluminium die-casting moulds, related products, and mould prototype for export. We not only have advanced mould-making equipments, but also have a team composed of experienced professional staff to provide high-quality products, competitive price, satisfied service and on-time delivery to our customers. Generally speaking, we can supply you one-stop service!! WDF is Tier1 supplier for FOXCON, have supplied precision parts for IPOD, IPAD, IPHONE 4 AND IPHONE 4S, currently we are making production fixtures and other parts for IPHONE 5, with tolerance as close as 0.002mm. Abroad, we are making mold components for a Spanish client, who makes progressive dies, and having serving them since 2008. We had supplied thousands of precision parts for VOLVO, cooperated through trading companies. Our business scope of the precision parts as follows: I Phone Accessories Automobile part Fixture Mould part Automation equipment We not only have advanced equipments, but also have a team composed of experienced professional staff to provide high-quality products, competitive price, satisfied service and on-time delivery to our customers. Generally speaking, we can supply you one-stop service!! Treatment service such as heat treatment, plating, anodizing, oxidation and so on, all of according to our client’s requested. Lead time: 7 to 15 days for parts, depending on the quantity of the order. Each year, we produce about 75% moulds are exported to overseas, such as Sweden, Spain, USA, Italy and other European countries. For more information, please visit our website: http://www.wdf-grp.com. We are sure that we can meet your high-standard demand. If anything we can do for you, please do not hesitant to contact us. We will respond to you promptly.
    > Read more

    Watch

    inox centar hoegger d.o.o.

    We are specialized in processing and machining of stainless, aluminum and structural steel plates. We also complete assemblies according to customer specification. COMPETENCE: In addition to our expertise in laser cutting, bending and stamping we take over for our customers welding and assembly work for both simple, steel and stainless steel constructions as well as for whole groups or equipment. The in-house engineering, takes orders for planning and design of machinery for the food and pharmaceutical industries, such as: pasteurizer, vacuum cookers, honey mixers, blenders, dryers, conveyors etc. Our philosophy, and the basis for successful partnerships with our customers is high-quality products and services delivered on time. Together with our many partners we complete our service's domain in Case hardening, Nitriding, Ion nitriding, plasticizing, chrome plating, nickel plating, cold and hot galvanizing, CNC turning and milling, casting of cast aluminum and cast steel, electro-polishing, etc. HISTORY The company was founded in early 2005 as a supplier of the company HOEGGER AG in Switzerland. Through combined reliability and high quality standards with economic prices, the company could expand rapidly and has doubled a production in 2007. In addition site was created, for complete machinery and equipment manufacture and assemble, since the development of the employees in these skills and achieved a high standards. Since 01/12/2009 a new name and new logo is introduced. OLD NAME: C. Hoegger d.o.o NEW NAME: inox Hoegger centar doo or shortened inoxch LOCATION: The company is located in Croatia near Varazdin only 260 km from Vienna, just 550 km from Munich, 850 km from Frankfurt am Main, 1050 km from Berlin, 720 km from Milan, 865 km from Zurich and is close to the border with Slovenia and Hungary. We process the following steels: Steel: S235, St37, 1.0037, 1.0038, 1.0116 S275, St44, 1.0044, 1.0144 S355, St52, 1.0570, P265GH, H I, H II, H III 1.0425 P295GH, 17Mn4, 1.0481 P355GH, 19Mn6, 1.0473 16Mo3, 15Mo3, 1.5415, DD11, StW22, 1.0332 DD12, RRStW22, 1.0398 DD13, StW24, 1.0335 DD14, 1.0389, DC01A, St12, 1.0330 DC03A, RRSt13, 1.0347 DC04A, St14, 1.0338 DC05A, ST15, 1.0312, Vessel steel Grade A, Grade B, Grade D, Grade E, etc. Galvanized sheets: DX51D + Z275 NAC, 1.0226, ST02 Z DX52D + Z275 NAC, 1.0350, ST03 Z DX53D + Z275 NAC, 1.0355, ST05 Z DX54D + Z275 NAC, 1.0306, ST06 Z Stainless steel / steel: 1.4003, X2CrNi12 1.4016, X6Cr17 1.4301, X5CrNi18-10, 304 1.4307, X2CrNi18-9 1.4305, X8CrNiS18-9, 303 1.4567, X3CrNiCu18-9-4 1.4541, X6CrNiTi18-10 1.4318, X2CrNiN18-7 1.4401, X5CrNiMo17-12-2 1.4404, X2CrNiMo17-12-2, 316L 1.4578, X3CrNiCuMo17-11-3-2 1.4571, X6CrNiMoTi17-12-2, 316Ti 1.4435, X2CrNiMo18-14-3, 316L 1.4439, X2CrNiMoN17-13-5 1.4462, X2CrNiMoN22-5-3 1.4539, X1NiCrMoCu25-20-5, 904L 1.4565, X2CrNiMnMoNbN25-18-5-4 1.4575, X1CrNiMoNb28-4-2 1.4529, X1NiCrMoCuN25-20-7 1.4547, X1CrNiMoCuN20-18-7, 254SMO 1.4713, X10CrAlSi7 1.4720, X7CrTi12 1.4742, X10CrAlSi18 1.4762, X10CrAlSi25, 1.4828, X15CrNiSi20-12 1.4841, X15CrNiSi25-21 1.4845, X8CrNi25-2 1.4876, X10NiCrAlTi32-21 1.4878, X8CrNiTi18-10 Special steel: HARDOX, ENDURA, RAEX etc.
    > Read more
    Employees
    10 - 20
    Year of foundation
    2004
    Certifications

    Watch

    Taicang Zhongbo Railway Fastening

    Zhongbo Railway Fastening Company is a leading Chinese manufacturer of rail fastening and rail joint bar. Zhongbo, as a specialized rail fastener manufacturer, provides a complete line of products, including rail fastening, anchor, rail joint, rail clip, rail screw, anchor bolt, rail clamp plate, rail fishplate, and fishplate bolt for connecting rail tracks. We also make rail fastenings for crane rail and elevator guide rail, along with other related products. We manufacture according to GB/TB (Chinese national standards and railway standards), AREA, UIC, BS, DIN, ASTM, and AS standards. Our products are mainly made through hot forging. The threads of rail screw spikes are made by hot rolling with special threading machines. We produce metric threads, BS, BSW, TR thread, or round threads. Our high strength bolts come in different specifications of Class 4.8, 4.6, 5.6, 5.8, 6.8, 8.8, 10.9, and 12.9. A variety of non-standard fastening is also available. We can customize our products using customer drawings or samples as well.
    > Read more
    Employees
    200 - 500
    Year of foundation
    2006
    Certifications
    ISO 9001:2008

    Watch

    LOMA Drehteile GmbH & Co.KG

    Tackle the change with optimism - LOMA for a piece of the company philosophy. LOMA is a company completely CNC machining and CNC grinding, this will be a match for the challenges of the coming years with regard to all conditions. Tackle the change with optimism - LOMA for a piece of the company philosophy. Core competence: the production of high precision turned parts, milled parts and grinding parts and the cutting further processing of cold formed parts and the assembly of modules. In LOMA are the requirements for consistent quality. Manufacturing technologies: - Turning - Grinding - Spaces - Vibratory Finishing - Surface treatment - Milling - Thread rolling - Stamping - Heat treatment - Assembly Industries: -Building -Electrical Engineering -Automotive Aerospace industry -Mechanical Engineering Hydraulic industry -Medical Pneumatic industry Connection technology -... High vertical, short lead times and flexibility in every respect: With these high standards LOMA offers a wide range of parts from a single source. Manufacturing technologies: Turning Loops Spaces -Vibratory finishing Surface treatment Milling Roll-threaded Punches Heat treatment -Assembly To this end, use is made of modern machinery: CNC short turning, CNC sliding headstock lathes, CNC multi-spindle, CNC machining centers, CNC lathes cycles, curve machines, rotary transfer machines, Thread Rolling Machines, CNC grinding, eccentric presses. Materials: Rust-and acid-resistant steels (1.4301, 1.4404, 1.4571, 1.4548, etc.) Titanium Deployment, remuneration and nitriding -Cutting steels Aluminum Brass Plastics (Pom, Peek, etc.) Kalei-Setzmutter Kalei-Setzmuttern assert themselves in situations where high rotating torques and tightening forces are required in thin-walled sheet metal and plastic parts.She is a very high-quality alternative to soldered and welded fasteners. Abreißmuttern Abreißmuttern will find their use where threaded connections must be designed to prevent theft. The use is mainly in the area of ​​building and property protection (safety fences and barriers) as well as the mounting of photovoltaic modules. Do not hesitate to contact us: 07429/9303-0
    > Read more
    Employees
    50 - 100
    Year of foundation
    1956
    Certifications
    ISO 9001:2008

    Watch

    Gläser Automatendreherei GmbH

    The Glaeser Precision Turning Shop GmbH is a family-run business. It is our understanding that you as a customer of our company are also considered our partner. We solve your problems in conjunction with you. Short-term decision-making processes and flexible resetting capabilities ensure a fast implementation even of special demands. Necessary alterations we realize in short terms and without any loss of time. Adherence to delivery dates and short periods from placing the order to shipping can be taken for granted. Through the continuous enlargement of our manufacturing capabilities we grow with the challenges and tasks assigned to us by our customers. Both flexibility and reliability serve as the basis of our business policy. Decide in favour of quality! We always aim at your complete satisfaction and contentment.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1993
    Certifications
    ISO 9001:2008

    Watch

    GIMOS MECCANICA S.R.L.

    Workings: turning milling correction induction hardening Components: Sleeve Pin joint shell Flange Spacer
    > Read more
    Employees
    10 - 20
    Year of foundation
    1992
    Certifications
    ISO 9001:2008

    Watch

    marti innovative constructions

    We are innovative company with a worldwide presence with advertising products and products of machine componets. Company owned : - welding robots, - automated CNC production lines and pre-cut machines, - laser tube cutting machine, laser metal sheet cutting machine, - plazma HiFoucs cutting machine, - 3D metal sheet bending machine, - 3 axe milling machine, - turning lathe, welding machines, - stamping machines, - powder coating machine, - and other machineries. Production is focused on the development of the company's own, innovative product concepts and material techniques. The company was founded 1999 and it is located in nothern part of Croatia in Prelog (130 km from Graz, 260 km from Vienna, 550 km from Munich, 850 km from Frankfurt, 1050 km from Berlin, 720 km from Milan and 865 km from Zurich. We are specialized in processing and machining of stainless steel, aluminum and structural steel plates. Also we complete assemblies according to customer specification. Our expertise is in professional team, up to date technology and complete manufacturing process. Due to that at every stage of production we can supervise the quality and delivery time.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1999
    Certifications

    Watch

    Calorifer Engineering AG

    As a leading manufacturer of equipment and systems in the process and heat technology, we are focused on customized solutions and specialized in high-quality welded construction. With our team of engineers, process and production specialists, we manufacture in our factories in Elgg (near Zurich) and Oberuzwil (near St. Gallen). After more than 50 years of experience in the production of industrial heat exchangers, we have expanded our expertise as a systems provider and have a machine park, which is also used for contract manufacturing. Committed to quality and in possession of important national and international approvals, we deliver our products and installations around the globe. * Plate heat exchanger heat exchanger * Sterile * pressure gas cooler * Druckgaserhitzer * finned tube Register * Register * smooth tube shell and tube heat exchanger * oil cooler *
    > Read more
    Employees
    50 - 100
    Year of foundation
    1951
    Certifications
    ISO 9001:2008

    Watch

    AWEBA Werkzeugbau GmbH Aue

    We specialize in the manufacture of complex components of the tooling and engineering, typically in the lot size "one" and even small lots & prototypes. We are equipped with machinery that covers the entire process chain of such components. From the pre-and soft processing, about the hardships in the area of the tool and machine typical types of steel, extends to the finish in air-conditioned rooms, our machinery. Machining Centers / Drilling / milling from DMG / DMU and Hermle, Roeder HSC milling, turning / lathe Mori Seiki and Okuma, grinders grinding / Jig Grinding by Hauser, Kellenberger, and the young and the EDM / DEM Wire EDM / EDM SEM from AgieCharmilles and OPS / Ingersoll are installed by us. With 170 machine operators and 120 machines we make about 450,000 per year production hours. We manufacture plates, frames, stamp guide plates, molded frames, moldings, 3D-shaped parts, guide plates, stripper, stripper plates and precision parts such as stamps, molds up to a size of 2000 x 1700, 3D parts up to 1700 x 1400, turned parts up to diameter 650 x 1000 In-house hardening, coatings (PVD, TiN, TiCN, CrN, WCC) in cooperation. The materials we specialize in tool steels, high alloy steels (1.2379, 1.2343 ESR, 1.2344, 1.2311, 1.2312, 1.3343, Divar) powder metallurgy steels, PM steels (CPM, ASP, Vanadis VAN, REX, Hotvar) as well as hard metal carbide ( G10, G20, G30, K10, K20, K40, H40S).
    > Read more
    Employees
    200 - 500
    Year of foundation
    1882
    Certifications
    ISO 9001:2008

    Watch

    MAKIM Makina Teknolojileri A.S.

    MAKIM has been founded in 1982 in Ankara Turkey and now operates in 3 main sectors, which are investment casting, access control systems and electromechanical devices. MAKIM has been manufacturing investment cast parts since 2000 and now operates in a closed area of 2500 square meters with around 110 employees overall in Ankara, Turkey. MAKIM offers parts from mainly steel, stainless steel, cobalt and nickel base alloys; from 5 gr to 20 kg by weight depending on the size. MAKIM has a manufacturing system that allows to produce from very low batches to moderately high batches. The manufacturing capacity is 600 tons/year for steel alloys. MAKIM serves the industries of general machinery, medical implants, valves and pumps, energy, automotive and food industries. MAKIM manufactures parts for domestic as well as international markets and exports 33% of the production mainly to Germany, France, Netherlands, United Kingdom, USA, Belgium, Hungary and Sweden. MAKIM provides customers, only castings as well as fully finished parts including machining, heat treatment, surface treatment. MAKIM has in house tool and machine shop. MAKIM has strict quality control requirements, has in house NDT facilities including Radioscopic Inspection, Magnetic Particle Inspection and Fluorescent Penetrant Inscpection with certified quality control personnel according to ASNT-SNT-TC-1A. MAKIM holds ISO 9001:2008 Quality Management System Certificate, ISO 13485 for medical devices, AD2000 Merkblatt W0 for pressure purpose castings, ISO 14001 for environment and ISO 18001 for health and safety.
    > Read more
    Employees
    100 - 200
    Year of foundation
    1982
    Certifications
    ISO 9001:2008

    Watch

    KOVO Velič DOV

    Company Kovo Velič was founded in 1995. We are family based company with many years of experience manufacturing precision parts. Now we have 27 employees. Manufacturing program of our company is based on piece and small serie production of clamping tools, measuring instruments, automotive and other parts according to custumer requirements. We are trying to stay in touch with newest technologies and constantly renewing our machines. We offer services in milling, turning, grinding (cylinder and plane), straight gear tooth grinding and coordinates grinding. We can also secure heat treatment, surface treatment and assembling.
    > Read more
    Employees
    20 - 50
    Year of foundation
    1995
    Certifications

    Watch

    Rex Industrie-Produkte Graf von Rex...

    About us We, the Rex Industrie-Produkte Graf von Rex GmbH is a medium-sized company with about 75 employees. The company is based in Vellberg in the Hohenlohe region between Schwäbisch Hall, Crailsheim and Ellwangen. We have specialized in niche applications: Technical textiles for heat protection and insulation Insulation products of inorganic / organic fibrous raw materials for fire, heat, cold and sound insulation Fire protection products for building construction Friction and sliding materials (REX 2000) for industrial applications Moldings in vacuum forming Metalworking for mechanical engineering and special engineering Our products are customized and application specifically designed depending on the problem. They are characterized by excellent technical characteristics and consistently high quality. They are quick, handle clean and safe. Our main areas of application are mechanical engineering, shipbuilding, railway, power plants, military and industrial standard and special solutions. The introduced and practiced quality management system is certified according to DIN ISO 9001:2008. Furthermore, the quality management system for certain products, correspond to Module D (production quality assurance) of Directive 96/98/EC on marine equipment and is regularly reviewed and certified by the See-BG.
    > Read more
    Employees
    50 - 100
    Year of foundation
    1952
    Certifications
    ISO 9001:2008
    TP Suche Banner
Limit search by:
Region
Technologies
Materials
Company data
Industries
Certifications