WHEN WE CUT FROM GOOD! Water jet cutting industry meets In principle, rectangles, circles, ellipses, curved paths (eg, holes, flanges, cutouts, perforated sheets, letters, pipe cuttings, etc.) are produced each geometry of flat and slightly curved surfaces so. The maximum cutting accuracy of our method is: Accuracies: + / - 0.1 mm Water is forced under a pressure of about 4000 bar through a nozzle of 0.2 mm. The water admixed abrasive ensures a "grinding out" the kerf of 1 mm or less. This Mikrozerspanungsprozess hardest materials to be cut. A CNC controlled water jet cutting machine enables cutting of any form of flat plates. Water jet cutting meets craftsmanship With the water jet, almost all materials from aluminum, stainless steel, porcelain tile, ceramic tile, granite, copper, brass, titanium, steel, stone, and non-ferrous metal, glass, ceramic, plastic and composite materials to natural materials such as wood, cork, and Edit rubber without problems. The water jet can simultaneously edit multiple layers of materials. - No deformation due to delay in heating - No burn-off at the cut edges - No hardening in the kerf by temperature - No tempering colors on steel - Clean cut edges with aluminum, brass, copper, etc. - The finest contours with extremely thin bars (tool width 0.8 mm) - Very true to size, so no rework required - Economical even for single parts and small series

Suzhou Skyler Electronic Technology Co.,Ltd was established in 2016, it is joint venture of Denish in China , engaging in mechanical and electronic manufacturing filed, OEM precision milled parts, turned parts & assembly manufacturer, aim to make human’s manufacturing higher quality, lower cost with more advanced technology.

The art of bending - bending technology from Berlin-Brandenburg We, the company bending professionals RHB GmbH is a service provider based in Berlin-Spandau, who has specialized since 1984 on the bending of tubes and profiles. For medium and small series, but also in the tube or pipe fittings technical product development according to individual customer specifications per a high standard is now more than placed on efficient solutions - understanding of quality and holistic thinking and action therefore are our priority. As a partner in the design and product phase we stand with all our know-how. On the requirements of our business partners, we respond quickly and accurately. We offer excellent technical facilities as well as a comprehensive range of complete solutions. Our machinery includes, inter alia, CN-controlled mandrel bending machines as well as ring and section steel bending machines. The business of the company consists of the * Mandrel bending of round tube (3 to 76.1 mm) * Ring bending round tube (15-160 mm) * Ring bending of profiles (various profiles, various diameter) * Pipe end (beading, flaring, adjustments) * Pipe penetrations and pipe branches * Further work (welding, machining, Attachments, Accessories, pipe systems) * Sale of Material

Welded constructions in single and series production. Welding certificate DIN EN 1090-2 in connection with DIN EN 1090-1. Manufacture of steel structures up to EXC 3. Pressure vessel construction according to the Pressure Equipment Directive (2014/64 / EU) and AD 2000HP0. Pipeline construction Our specialty is welded constructions in single and series production, especially unwinding and piping. Water jet cutting, rolling, milling, bending, plasma cutting, blasting, painting.

ZIHOS sro - engineering production We are a purely Czech company that has been providing comprehensive mechanical engineering solutions for almost 27 years. Our main areas of activity include the production of welded structures, special machines, custom metal production, the production of antenna brackets and CNC machining. How do we work We can offer comprehensive solutions - from planning and construction through production itself to surface treatment and transport. History of Zihos Zihos sro was founded in 1991 as a production company with a focus on garden tools and garden technology. The first type of very popular cultivator was manufactured here as early as 1992. Nowadays, the production specializes in particular in CNC machining, manufacture of antenna holders, custom production, production of special machines and welded constructions. The company 1 is located at the Švihov site.900 m2 production area and an office building are available. In 2013 the new location in Klatovy was established. This location covers a total area of 5,000 m2 and the focus of its offer is on CNC machining and construction activity. Zihos has experienced dynamic development since the company was founded, as shown, for example, by the number of employees, which has risen from originally five to over 40 employees. Our business partners include well-known domestic and foreign companies, the most important of which include, for example, ASSAT or Firmconsult, Instron, Herink ... In 2014 ZIHOS sro was certified according to ČSN EN ISO 1090, we can therefore produce the components subject to this standard and draw up the CE declaration of performance. Our company has a certified welding system according to ČSN EN ISO 3834-2, with this certification we can guarantee the high quality of welding work by ZIHOS s.ro guarantee. In 2018 the location in Klatovy was split off and the new company ZIHOS Klatovy was founded, which is geared towards the processing of larger complexes.

CP Tech GmbH from Büren has been part of the Nedschroef Group since June 2017 and focuses on innovative in-house products, engineering services, high-performance components and complete solutions for the automotive, motorsport and aviation industries. The focus of the corporate strategy is on the development of new mobility concepts, shaped by global trends such as e-mobility, lightweight construction, networking, sustainability and autonomous means of transport. With around 210 employees, CP covers the entire value chain from development through project management, production and assembly to testing and validation of complete vehicles. The core competence of CP lies in the production of high-precision lightweight components from high-strength steels and the interaction of hand-held welding processes, heat treatments, mechanical processing, including the associated device concepts. CP also has its own agency in Shanghai (China) and works there with various companies.

ENERGOREMONT AG is a successful medium-sized company in the field of steel construction and power plant construction which addresses the growing challenges of the market as well as new business opportunities with innovation and quality. We offer our customers and partners high-quality products and services with a focus on the development of innovative and holistic solutions. Our own high standards in relation to: • product quality, • reliability and customer satisfaction, • advanced technological processes, • the most modern technological equipment • competent and trained employees Our offer includes the development, production, marketing and distribution of products in the field of steel construction and energy plant construction. The main activity focuses on: - Maintenance of energy systems - plant overhauls - General overhaul of machine tools: lathes, milling machines, grinding machines, presses ... - All types of metal construction - Manufacture of light metal structures, medium-weight structures, steel structures - Production of all types of front gears from modules 0.5 to 14 and max. Diameter 1200 mm ... - Welding of steel and cast iron, aluminum, stainless steel, repair welding - Manufacture and design of electrical systems - Overhaul of asynchronous motors.

We make everything from metal to what you imagine

KSM Stoutz apparatus AG joins a family which modern production methods with traditional craftsmanship in the most optimal way. In a close and committed collaboration with our clients, we manufacture products, which meet the highest quality requirements. Our strengths lie in the planning and development as well as the precise and professional manufacture of individual parts and series production of the entire range of metal processing.

We are contract manufacturing company from South Bohemia. We deal with welding, mechanical processing of welded structures, turning, milling and surface treatments as well as heat treatment and assembly.

Future-oriented To provide first-class services, engaging our customers with high benefits for the business success in claim our self is since the company's inception. Since the nineties we also build in the wake of globalization, our leading position continuously. Top quality and unconditional punctuality are both the foundation of our corporate philosophy and our success. Even in the global age, we keep the values ​​of an organically grown family business high, the direct line to the customer and personal responsibility. We want to not only meet but exceed the expectations of our customers. This includes the willingness to take on challenges and implement ideas, more commitment to investing in innovative technologies, more flexibility for solving the tasks of a fast developing future. We as Kirrbach AG benefit from synergies by leveraging once established consistently, continue to think clever inspirations and take over existing knowledge to build on.The merging of action sequences and production processes brings us a decisive competitive advantage. The entire AG is developed with innovation and commitment products for tomorrow's markets. So we will continue to be faster than others, and realize good ideas first - this ensures the long-term success. Contract manufacturer of water jet cutting, laser cutting, folding, welding assembly manufacturing, pipe machining.

Finish: ENERGY EFFICIENT, dimensionally stable, FRIENDLY MATERIAL Wage treatment: -Plasmanitrieren -Plasmanitrocarburieren And Oxidation -Abhol- U. Deliveries by arrangement -Werkstoffberatung Construction of plasma nitriding on customer Research and Development Delivery time: from 24h - We give everything, so you do not lose any time! The company: The company Plasmanitriertechnik was established in September 1996 by Prof. Dr.-Ing. Sabine Böhm founded. The goal was and is to offer plasma heat treatment as a contract manufacturer, as well as promote research and development in the fields of plasma and materials technologies and associated systems engineering. Since its establishment, our company has become a reliable partner for the machinery and vehicle and tool making. The services and core competencies of wage treatment include plasma nitriding, plasma nitrocarburizing and oxidation.Capacity for the processes offered are steadily built up to meet the growing demand for these Oberflächenh��rtungsmöglichkeiten can. In the meantime more than 15 years of business, the company can look back on a steady development. Quickly rose to the top customer number and order volumes, so now have 8 plants for plasma nitriding and nitrocarburizing in operation. With the move from the old location in the center of Chemnitz technology to its current location in the Robert-Blum-Str. in Chemnitz in 2005, this possibility was created for this extension. Since 2005, the plants are built themselves and, since 2010, the construction is performed in-house. In addition to building their own systems also several engineering projects for various customers were realized. In addition to the wage treatment plant and existing technologies in research and development projects developed, established innovative procedures, as well as designed and constructed new facilities.Research topics include the plasma polishing, atmospheric plasma treatment, and the use of existing technology in new application areas. It is working closely with a variety of partners from industry, universities and research institutions. The number of employees has been expanded from an initial 2 now on 12 full and part-time employees. Many trainees have completed their required internships. Students of universities and technical colleges, and technical schools enrolled diploma, bachelor and technicians working on topics of plasma nitriding and related topics. For the future is important for us not to stand still, but develop ourselves. With research and development projects, we intend to further develop the technology. New facilities should be designed and constructed. In best way we want to be there for our customers and the orders done quickly and in very good quality.

The Linner Tooling GmbH is a family owned company in Wolnzach near Munich with about 120 employees. We are on the market now for about 30 years and are known for reliable quality, customer focused services and a very high degree of flexibility. To keep our position in the future we focused on three separate and highly specialized divisions.

Precision series production Our series production deals with companies in the electronic industry mainly. For those companies a high quantity of products in good quality matters and so we use our turning automats, rotary transfer machines and indexing table machines in optimal way to meet theire requirements in a flexible and economical way.

Precision tools and components The division has a big branch of customers from different industries for whom it produces special-purpose tools as fastener for reversing plates, profile and forming tools and many more. The range of parts produced in this division is limited by diameters up to 250 x 250 mm and we use combinations of grinding, eroding, milling or turning in an optimal way to ensure good quality. Therefore we use 5-axis milling centers and the latest CAD / CAM Systems to guarantee repeatability and the high standard of quality.

Tool sharpening With most modern 5-axis CNC grinding machines and with the help of graphical simulation programs we produce new tools as stepped drills, profile millers and special-purpose tools. Further we regrind or reproduce special and standard tools with original geometrical data so the tools are as capable as new once.

Off course we also offer common and special coatings and we are able to supply kanban-systems, a stock at your place and supply you just in time.

The company POK doo, has been working in the metal industry for 30 years. We have a lot of know how and offer products from sheet metal and pipes, as for example, chopped bent or drawn on eccentric presses sheet un pipes, up to 2500 KN. CNC processing, punching, bending and laser cutting of sheet metal, steel 20 mm thick, Stainless steel 10 mm thick, aluminum Max 6 mm thick, laser cutting of tubes with the Diameter 20 to 40 mm, maximum total weight up to 200 kg, steel 12 mm thick, Stainless Steel 5 mm thick and aluminum 4 mm thick. We also offer steel, stainless steel and aluminum Alloys Welding job by MIG, MAG, TIG to methods. The products are available either as individual parts or combined parts. The products can be protected at the surface. The products are adapted to your plans and desires, or give to their ideas and we make remaining planning. We offer: -

We design and manufacture hydraulic components from stainless steel and plastics for use in devices of high purity water, media supply and concentrate preparation for medical technology and pharmaceuticals. We offer complete solutions from a single source - from conception through samples and mass production to assembly of the finished components. Our scope of activities includes: designing, prototyping to series production of individual components and machines. To ensure the highest quality standards, we are constantly investing in the latest manufacturing methods in our machinery, as well as the development of our employees. Also, a flexible, precise mode of production, as well as constant internal quality control and external monitoring by independent testing institutes, contribute to a high level of product quality and satisfied customers. Our company is in accordance with DIN EN ISO 13485:2012 VDE certified

At Phoenix Maschinenbau, we differ from conventional mechanical engineering companies in that we do not offer our own product range, but provide complete support and implementation of your project. We call it Phoenix Mechanical Engineering Solutions from Engineers and we attach great importance to these statements. In addition, we operate in the entire mechanical engineering sector and are not limited to one sector. Thanks to our large and unlimited variety of resources, we of course also offer our segments individually. Another important point is that, as Phoenix Maschinenbau, we are represented in several cities and regions and can therefore guarantee service independently of the location. The solutions provided by engineers and technicians from Phoenix Maschinenbau are always eager to provide you with technically and economically compatible solutions. Experience has shown us that rarely an office or a company can solve a problem comprehensively. We were born precisely with this idea in mind. We want our customers to get everything from a single source, so the question why is very easy to answer. We will explain the benefits of this to you in very general terms. An inquiry to a design office usually results in something having to be manufactured in production afterwards, and this is where the first time losses and problems occur. Dimensions are missing; the function of components is unclear; errors occur as manufacturers produce blindly according to drawings. What would happen if both were created in one company? Errors that occur are identified before delivery and resolved within short distances. Depending on the scope of the project, this process is very lengthy. Not with us!

We are a medium sized company with many years of experience and expertise in the field of sheet metal processing. Our specialty is the production of switchboards and special housings in small and large series. In addition, we are a competent partner for special solutions and special designs. Our performance makes us a reliable partner for many companies in the fields of rail, vehicle and plant construction. Production Modern jobs at the highest level In order to manufacture your products LTH System GmbH Berlin are high quality machine tools for a variety of methods are available that meet the modern standard of a manufacturing company. It can be processed sheets 3000 mm with a size of 1500 x, there are CNC-controlled bending machines and CNC-controlled guillotine shears ready for further processing. The laser high pressure cutting allows the oxide-free machining stainless steel to (15 mm) thickness and burr-free machining of aluminum (10mm) and many other materials. On the hydraulic saw profiles can be cut to 120 mm. The three-roller bending machine, presses, punching machines and other metalworking machines complete the range. Our processing Pool: • Scissors • Presses • lasers • Rivets • Stamping • Forming • Drilling Assembly Functional and adaptable In the area of ​​installation, we are equipped with advanced joining technologies. • Metal active gas welding (MAG) • metal inert gas welding (MIG) • tungsten inert gas welding (TIG) • Lötschmelzverfahren • Resistance spot welding (RP) • drawn arc stud welding (BH) • Stud welding with tip ignition (BS) We work for you • mild steel up strength 500 N / mm ² • Stainless steel • Aluminium Product treatment Protection function and finish For the finishing of the product is directly from us, the surface treatment. In addition to the in-house wet paint line and the powder plant, which

Extrusion blow molding, extrusion blow, blowing, wind, technical plastic blow molded parts, blow molded parts, blow molded parts, drawing parts, blow molded parts according to drawing, Blow molding, blow molded, hollow blow-molded parts, Hollow plastic body, Blow molding, automotive, plumbing, toys, technical parts, packaging, packaging, pipes, tank, petrol tank, Füllartikel, garden ball, cold pack, Technical blow molded parts, garden machinery, extrusion blow molding, toy parts, Basteilwaren, automobile, automobile parts, injection molding, injection molded parts, molded parts, tooling, tools, finishing, further processing, assembly plastic parts, Christmas boots, Füllstiefel Decoration and Aufbindeartikel for the confectionery industry, Easter and Weihnachtsfüllartikel

Powder coating, chrome-free surface pretreatment of 7m aluminum profiles acc. Quality associations, passivation, stripping, fine plaster, blasting, sweeping, assembly work, aluminum profile coatings ___________________________________________________________________________________________________________________ Bending pipes made of various metals and non-metals

The Company The endeavor of Electrical & Strobel construction, it is the design, Assembly and distribution of robotic systems and automation systems in quality conscious design. We select our suppliers based on the criteria of reliability, quality and flexibility. For our customers, we are always striving to achieve the best and to offer flexibility, service and development of a complete package. Engineering company CNC turning CNC Milling Laser Micro Welding Flat and cylindrical grinding CAD designs Toolmaking Jigs and fixtures Cutting Tools Robot systems complete with equipment.

On machines with the highest technical level, we produce small and large series from 1 to over 1,000,000 pieces. We offer the full range of metal cutting, manufacture quality products with the highest precision of all machinable materials with diameters ranging from Ø 4 to Ø 120 and part lengths up to 1000 mm. We process steel, stainless steel and non-ferrous metals aluminum, brass and copper. In our core competencies turning occupies the largest position, but also Hardening, grinding, hard turning, and assembly of components are part of our range of services. Our product range includes valve guides, pistons, bushings, washers, rings, valve seats, screw, cone, spool, pipes, sleeves, shafts, ground and hardened axles, hubs, stopper, spool, spring plates, pins, rollers, throttle bolts, nozzles, screws, Screw plugs, orifice plates, spindles, cap screws, pins, cylindrical rollers, sealing stop, shift rods, ... All standard heat treatments such as carburizing, nitriding, nitro-carburizing and surface coatings such as zinc plating, chrome plating, bronzing, we can offer some in our house or together with suitable partners. A testament to the high quality of our production processes and measuring equipment is certified to ISO TS 16949:2002.

Metal Investigating operating for prototypes, single, small series and medium series. Welding certificate according to DIN 18800 Class D for MMA, MAG, TIG, MIG gepr welders for aluminum, mild steel and stainless steel Water jet Blank and pre-processing means of water jet technology in the 2-D + 3-D range of all metals such as steel, stainless steel, aluminum, titanium, copper in sheets, as well as partially processed products, such as bending edge moldings and dished bottom that only after the Editing us can be cut to shape. Also, plastic, GFG, CFRP, glass, ceramics and composite materials are cut by us. We cut almost all materials in 2 - and 3-dimensional design. Construction We offer special constructions of any kind according to your interests. Contract manufacturing of components and assemblies including mechanical processing, welding construction and final assembly including surface treatment, surface, edge and slide grinding of metals. Metal Sheet metal and metal processing, production of steel stairs, metalworking and welding, window systems, door systems, door systems, curtain walls made of steel, aluminum and stainless steel.

Technical springs for industrial applications We produce our technical springs according to your wishes and specifications. We can handle all customary spring steels constisting of chromium-nickel, copper, bronze, brass, nickel silver, heating element wire and other special materials. Surface treatmens are processed if desired. Please request your stamping and bent parts in accordance with DIN 6930/ 6935. We are experts for the production of technical springs especially for extreme filigree parts used for medical and dental technology (sterility), for building measurement devices (repeatable accuracy) or for hearing aids (small size of the parts). Furthermore the technical springs of Alfred Weigel KG Federnfabrik are applicated for sun shades with a recess function. Foundation 1st July 1909 We are certified to DIN ISO 9001:2015 and QM 14001:2015

Founded in 1999, Euro Forming Service GmbH is the expert for non-cutting forming. The processing of medium and large series is our profession; In addition to the automotive industry and its supplier industry, the areas of application are also in the areas of drilling technology, agriculture and other branches of industry. Our main production site and our administrative headquarters are in Bitburg. We operate another production facility in Heiligenkreuz in the Lafnitztal (Austria).

Fa DVM GmbH is a relatively young company in Germany, but has been working for many years already with well-known German and European companies. Our establishment is located in the Swabian Unteraspach (Backnang). Fa DVM GmbH is a competent and reliable partner for the trustful execution of: • QUALITY TESTS • ASSEMBLY • REWORK • ZP / ZFP DESTRUCTIVE TESTING / DESTRUCTIVE TESTING • SUPPLIER MANAGEMENT available. Our wide range of methods and know-how are the basis for the successful and efficient implementation of your (potential) outsourcing projects. DVM company was founded in 2007. DVM company is certified to ISO 9001-2008.

Small company working with exceptional quality and attention to detail.

We are your competent partner in fluid technology with four locations in and outside Germany - CNC long and short turned parts - Vertical turning - Assembly of final-tested mechanical components - grinding (inside, outside, in the passage etc.) - honing - milling - sandblasting - hard machining Complete machining on modern CNC machines (long and short turned parts, vertical turning) - complex workpieces (from rd3 mm to rd300 mm, vertical turning up to rd150mm) can be produced in batches from 1000 to 100,000 pieces - All steels, case-hardened and highly tempered nitriding steels, stainless steels, non-ferrous metals as well as extruded, sintered and forged blanks can be machined. Our precisely machined and accurately controlled individual parts are assembled with the supplied, controlled external parts and then tested. The end result is tested and perfectly functioning assemblies directly to the customer's assembly line.

The company was founded in 1949 by Hauke ​​Walter Hauke ​​sen. founded. The company has set itself the target to process all kinds of metal. Made of iron, steel, stainless steel, aluminum, copper and brass welding complicated constructions and pipe bending constructions are made. The material undergoes metal with us from the mechanical machining to surface treatment is a proven program. This production range assumes, of course highly qualified and motivated employees and a large, high-quality machinery. Our company philosophy, "quality at a very reasonable price" has proven itself for over 50 years. Our customers, who are party to all industries, come from all over Germany. Take a picture of us - look!

Foundation Established in 1994, we mainly manufacture today for the steel plant and •. Our team consists of 12 specialists from various fields. Divisions: • Drehtechnik • Welding Technology • Flame cutting • Plasma cutting • cuts on plate shears or saw • Rollers • Bending • CNC turning • CNC Milling • Welding TIG, MIG, MAG • Machining • Milling Grind Cylindrical grinding • Max. D400 x 1500 Sheet metal & steel construction • Bending • Cut • Welding • Rollers

Company Fritsche GmbH & Co. KG. is manufacturer of industrial fittings for lubrication systems High quality standard of products, fair prices for our customers and on time delivery established us, the Fritsche GmbH & Co KG, for more than 22 years to an appreciated partner on the centralised lubrication systems sector. As an efficient producer and supplier for fittings and hose lines for centralised lubrication systems we supply as well producer as industry, factories and municipality worldwide with our products, whether Australia, North America, Latin America or Eastern - and Western Europe. Our range includes a high number of well-established fittings and hose lines. However, we are expanding our selection steadily on demand of our customers, thanks the thinness of our company we are able to react very quickly and flexibly on our customer needs. Innovative ideas concerning production flow and product development can be adapted after a short period of testing.