The ... Vielfätigkeit of mechanical engineering. For 35 years, our company has been working in the engineering industry. Always the goal in mind, independent and flexible manufacture our workpieces and to expand our product range, we manufacture to the highest quality standards and precision. With a modern and versatile machinery, we offer our customers experience and commitment in the development and production of their mission. Our handicraft business with about 20 employees specializing in the manufacture of parts, components and assemblies; manufacture both single and serial production are possible. We process a wide variety of metals and plastics - from 3D - CAD - design to the finished product. We design and manufacture - take your product ready for installation in reception, thus saving costs and time. As an experienced Hertseller of turned and milled parts in machinery and mold with a variety of materials, we guarantee quality, precision and flexibility. With CNC machines from renowned manufacturers in the field of machining, we produce from prototype to series production of technically demanding parts with consistent quality in 2D and 3D. Our modern CNC lathes are equipped with automatic bar feeder, driven tools, Y-axis and sub-spindle, so they allow the individual and series production of complex parts in a single pass. New in our machine park is a 5 - axis "Millturn" machining center with which we completely finished workpieces in one set-up, which leads to a significant reduction of the idle times and the precision significantly increases. With corresponding 5 - a pallet exchange system and a total of 90 tool places, we are well prepared for series production. - CNC Milling - 3-D mold - Vermessarbeiten and quality control
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1978
    Certifications

    Watch

    Techpilot Premium Member
    PMT GmbH
    Since 2005 we develop with our partner companies, new approaches and innovative solutions for the production of technical parts and assemblies. Our slogan "New Thinking! New action! New ways! ", We carry a competent and reliable contribution to your company's success. We advise our customers both during the product development process as well as the optimization of existing products in terms of the structural design, as well as on the use of suitable production methods and materials. We specialize in rotary swaging, spin forming, cold forging, machining (cutting all kinds), sintering, MIM, hot forging, stamping, deep drawing, sheet metal forming of all kinds, die-cast zinc, cast aluminum, cast iron, fasteners, ductile iron, cast iron and lots more! We enable potential costs through the re-design of your purchasing parts with the help of TRIZ methods, value analysis and Attributive sourcing.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2005
    Certifications
    ISO 9001:2008
    We provide machining services of unit parts, prototypes and short-run production. Problem-solving and provision of suitable machining solutions are what we do best. Our customers trust us because we are flexible with their enquiries and requirements, we deliver on-time and offer short- delivery times. This is what makes us stand out from the rest. The precision parts that we produced are known for its top quality, due to the raw materials used. Our experienced and passionate personnel carry a high sense of responsibility towards our customers and their product. We continue our expansion and growth, especially in technological developments. Our precision components are manufactured according to customer drawings, specifications and international standards. Design and production by reverse engineering method is also provided as a service. And finally, we offer competitive pricing, guaranteed!
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1986
    Certifications
    ISO 9001:2015
    Inter Technic sro has developed in more than 5 years into a powerful company. If you are interested, we work for you as an extended workbench or can help reduce overcapacity, then ask us. In January 2015, our machinery was another new and powerful 5-axis simultaneous milling extended Hermle C42. We have currently in another, new DMG CNC milling machine invested. - Table load up to 2,000 kg - Table size 1700 x 750 mm - Travel X = 1450 mm, Y = 700 mm, Z = 550 mm This machine is our production in addition to available from the KW22 / 15th A robot welding system was installed. This brings us to weld able TIG and MAG. We are very well set up for you to produce tools and jigs. We are happy to customize items, zero series, production parts or assemble complete modules. With two new wire EDM machines we can in 2-shift operation for you. Our machinery has been almost entirely reinvested. For quality assurance, is from March 2016 new Zeiss measuring machine available! For programming we use two CAD CAM - Siemens NX Unigraphics, Version: 8.5 programming stations and enables us to offer services to the 3-D machining. Another added advantage of unsrem companies: All contacts at Inter Technic spoke German except Slovak, English.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2010
    Certifications
    ISO 9001:2015
    For over 60 years we have manufactured plastic parts. As a partner, the precisely fulfill your requirements according to your 3D data, samples or drawings. We manufacture with modern machinery plastic injection tools, technical plastic parts and components and multi-component were for certified to the quality management system ISO 9001-2008. We process the injection molding process not only all common thermoplastics such as engineering plastics, but also high-temperature and bulk plastics to 40 computer-controlled, process-controlled injection molding machines up to a weight of approximately 1400 g. We offer you / our core competencies are: - injection molding - Mould - Assembly - Assembly - Labeling / marking - Pad printing (4 colors) - Plate Welding - Ultrasonic welding - Laser welding - Welding - Parts processing - Parts machining: grinding, wire cutting, EDM, CNC turning, milling Translation by Google Translate
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1952
    Certifications
    ISO 9001:2015
    Founded in 2016, PNS Germany developed into a global company. With various production locations worldwide, we are always able to respond flexibly and quickly to your requests. Originally coming from the field of mold making, we have expanded our portfolio to include the production of drawing parts, mechanical engineering and welded constructions. Your advantage is: everything from a single source. Just one contact person for your various inquiries. Our extensive production portfolio enables you to save costs by bundling technologies
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2016
    Certifications
    ISO 9001:2015
    Mould CAD / CAM Measurement Engraving Wage arrangements in the area milling, EDM and fairs.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1907
    Certifications
    ISO 9001:2015
    We are a medium-sized company in the field of metal processing. Our core competencies include the production of series parts and assemblies for industry and plant and mechanical engineering, in particular the food and beverage industry. For over 75 years, Lungmetall OHG has stood for efficiency, flexibility and competence in steel, stainless steel and aluminum. Whether individual or series production, with our modern machine park tailored to the requirements of our customers, we manufacture for you flexibly, inexpensively and quickly. We are lean enough to flexibly implement your ideas and wishes, but also large enough to provide you with the capacity you need, even for large series. Thanks to our high level of vertical integration, we appear on the market as a system supplier, as we are not dependent on other trades. This manifests itself in short delivery times and a high quality standard. With our currently 60 employees and our in-house design office, we offer you an extensive service portfolio and reliable processing of your orders! We would be happy to win you as a valued customer and assure you of a partnership and team-oriented cooperation.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1924
    Certifications
    DIN EN 1090

    Watch

    Techpilot Premium Member
    QDP B.V.
    From our own (100% WFOE) production plant in China, we provide in-house manufacturing of injection molds and injection molded products. This is the only way how we can secure the quality and protect your Intellectual Property, so you can rest assured that your product is in safe hands. QDP has more than 20 years experience in injection molding and product development.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2007
    Certifications
    ISO 9001:2015
    We are a leading manufacturer of state-of-the-art, top-notch vacuum components, either large series and/or tailor-made batches ! We are committed to matching our precious customers material handling requirements with the best solutions on unrivalled terms and conditions. We are looking forward to a successful collaboration with you. Please feel free to contact us -24/7-, I will be utmost delighted to submit you an unbeatable offer. Thanks in advance for having us. Diamantino S. ISIKCEVAHIR (MSiE) (Global Business Development Manager)
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1993
    Certifications
    ISO 9001:2015
    With our experience in various casting techniques and finishing processes of various casting, we have been active in the market for more than 40 years. We support and relieve our customers and offer the possibility to deliver a complete product, from processing to after-treatment. Our mission We focus on designing, manufacturing and delivering a total package of products. You can call on us for small and large work, but you can also use a certain processing or finishing process for your products. We are happy to be your adviser and partner for all your castings, whether it is a single piece of product or a larger series of products. We cast, melt, rotate milling, assemble and construct your product exactly as you wish. We place high demands on our quality. With us, a product does not leave the warehouse until it meets all the requirements regarding the mechanical properties and conditions. That way you can be sure that you will receive the highest quality at a competitive price.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    2018
    Certifications
    ISO 9001:2015
    Company ZUT "PROJEKT" offers services in: Processing of metal - milling, turning, Inen and outer grinding, Surface grinding, cutting, welding - steel, aluminum, stainless steel, Engineering, manufacturing spare parts and machine elements We offer: - Turning - Automatic turning (bar) - Hard roes - Milling - .... etc.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1991
    Certifications
    HEAVY - It's EASY for us! Pro-Moulding has over 30 years of experience in the field of plastic injection molding and has been characterized by precision, quality awareness and speed from the very beginning. Our high quality infrastructure guarantees a full service from mold and product development to serial production and numerous services. Through the motto "hard comes easy to us " the company has developed as a relevant partner mainly in Austria, Germany and Hungary. With an ultra-modern machine park in the high tonnage range, even the largest components can be easily implemented. We supply well-known equipment and component manufacturers in the outdoor, industrial, office furniture, medical technology and automotive sectors. Pro-Moulding employs about 100 people and is a company with a very solid financial background. With our modern machinery we are specialized in the production of large volume plastic parts. Our employees and the consistent implementation of the motto 'hard comes easy to us' are the success components for high customer satisfaction and growth. We process common engineering plastics such as ABS, POM, PA6.6, PPS, PBT, PP, PMMA and many other materials on 10 modern robot-controlled ENGEL machines with clamping forces from 88 kN to 2300 kN and shot weights bigger than 10.000 g. Our unrestricted goal as a company (team) is to be an A-supplier for each of our customers and thus a partner. To meet this claim, the continuous improvement of our processes (CIP) as well as the regular auditing of our quality management according to DIN EN ISO 9001:2015 is a matter of course for us. Our quality claim starts with the preparation, is accompanied by regular and random checks, internal and external audits and is ultimately supported by the high motivation of our employees. Certified according to EN ISO 9001:2015 and EN ISO 14001:2015 A direct contact person, supported by digital processing and confidentiality agreements, is part of a successful cooperation.
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1992
    Certifications
    ISO 9001:2015
    We are a small, medium-sized family business in the 2nd generation, which specializes in aluminum permanent mold casting. We also offer machining, surface and heat treatment of the cast parts. We have been supplying our customers both nationally and internationally with high quality and on-time delivery for over 50 years
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    1967
    Certifications
    ISO 9001:2015
    We are a young, modern company in the CNC contract manufacturing sector. Our quality standards as well as our adherence to deadlines are the top priority of our company. This is the only way we can identify with every product and every service. That is why we have set up this homepage for you so that we can inform you even better about our services. The service-oriented customer care is an essential cornerstone of our successful corporate strategy. Fulfilling your wishes is our focus. Qualified employees provide friendly and expert advice. Our extensive range of services leaves nothing to be desired. Convince yourself of our range of services and our diverse range of services in the field of CNC contract manufacturing. Our products are characterized by the highest quality and the most modern manufacturing technology. Of course we offer you all this at a fair price. Every employee has special knowledge and many years of professional experience in the field of CNC contract manufacturing. These are reflected in our products. You as a customer benefit from this, now and in the future!
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2012
    Certifications
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2001
    Certifications
    DIN EN 1090
    Innovative plastic products since 1989 The BÖHL-plastic GmbH & Co. KG specializes in the production certified technical precision injection molded thermoplastics. We cooperate with raw material manufacturers, but also with colleges and universities. Because the plastic processing is a challenging topic. Individual solutions are our strength. Our activities span the injection molding production for the lighting and automotive supplier industry. We are also working for the industries fittings, electrical and electronics, medical, furniture, steel and textiles. The headquarters of our plastic processing company located in southern Westphalia. Here we present for you since 1989 plastic parts from all common thermoplastics ago. We are supported by our own mold.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1989
    Certifications
    ISO 9001:2015
    3D laser accompanies your ideas from prototypes to series if. In the design or production Project Management / Consulting - Consulting for the optimal manufacturing process of your components if sand casting, investment casting, metal laser melting, 3D plastic printing or from the full milling - Feasibility study for the respective process - Procurement of plastic parts in PA2200, PA3200GF, Alumide, DuraForm ® Flex - Procurement of castings (sand casting, investment casting) Construction - Component development of plastic, sand or die casting components - Prototype tools, special machine, fixture, equipment - FEM calculations - Deriving electrodes - Interpretation of contour-hugging cooling for mold - Optimize the components on the metal laser melting process Metall-Laserschmelzen/LaserCUSING ® / SLM - Production of functional prototypes - Production of mold inserts with conformal cooling
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2011
    Certifications
    ISO 9001:2015
    Aria was founded on a simple principle of providing the customers with one-stop solution of design, development and production for both plastic and metal components and its support tooling. And we are set to compete in anything the industry has to offer in terms of quality, price and services. Aria’s high-tech manufacturing and production facilities include CNC Turning, Milling, Injection Molding, Die casting, Stamping as well as a range of finishing techniques. We welcome your queries!
    > Go to profile
    Employees
    200 - 500
    Year of foundation
    2010
    Certifications
    IATF 16949:2016
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1947
    Certifications
    ISO 9001:2015
    PEOPLE WITH EXPERTISE AND EXPERIENCE As a customer, you benefit from our generation-spanning experience and high quality awareness our specialists, which they continuously pass on in the company and in training. When it comes to tightest tolerances, complex geometries and demanding surfaces, REINER is your contact partner. ZINC DIE-CASTING With zinc, extremely filigree or thin-walled, technically high-quality parts can be cast and a very high degree of accuracy is achieved. In addition, zinc die-casting guarantees high productivity even with small quantities and, thanks to its durability, is a very interesting economic process. At our location in Furtwangen, zinc die-cast parts with a part weight of up to 700 grams cast in die casting machines with a clamping force of 5 to 125 tons. With a maximum clamping area of 400 x 600 millimetres, we cast the alloy Z410. MIM - Metal Injection Moulding In series production, MIM opens up completely new technical possibilities - right up to highly complex geometries and always with optimised cost-effectiveness. Cross holes, internal and external threads, gear teeth and surface structures are easily integrated into the component by MIM. The process combines the freedom of plastic injection moulding with the properties of metals. At REINER, a selection of low-alloy and stainless steels is used here. PRECISION CUTTING with forming technology In the field of precision stamping and forming technology REINER offers a range of processes and technologies for high-precision stamped and bent parts. Fine punching, hydraulic bending processes, NC punching or NC bending are as much a part of this as laser cutting. ASSEMBLY SERVICES Thanks to our expertise and range of services as a specialist component manufacturer, we can also process complete assemblies, partially assembled assemblies, components, system assemblies and assembled individual components for you. A unique selling point of REINER in component assembly is the vertical range of manufacture, which starts with the sketch plan if required. In the in-house development center, engineers are available at CAD stations to work out plans and transfer them seamlessly into the production of the components. TOOLBUILDING We are your partner for mould making, precision stamping tools and devices. The equipment: - CAD / CAM for design and production - sink and wire eroding - Surface, profile and jig grinding - Most modern CNC programming technology - HSC milling - Coordinate measuring technology for form and pattern measurement - Centres for machining - Services from the design to the finished component. In addition to the design and manufacture of tools and devices, we carry out maintenance and repairs ourselves.
    > Go to profile
    Employees
    100 - 200
    Year of foundation
    1913
    Certifications
    ISO 9001:2015
    Injection We squirt for you all on behalf of small batches to larger blanket orders. Moldings with insert (eg metal) are possible. Upon request, we also take over the complete material management for your production order, and store the injection molding tools for you. You only call from, we do the rest for you. Mould With a choice of partner companies in Germany, Europe and Asia, we are able to create you an offer for your individual molding tool you define the number of cycles, number of cavities, as 1k / 2k tool etc. mounting service If you already have a fully developed product and are still looking for a suitable partner for the assembly of sub-groups or complex assemblies, we are pleased to offer our services. Our strength lies in a very precise mounting. Here we are particularly specialized in the soldering and bonding, accurate mounting crafted and reliable final inspection.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    2013
    Certifications
    ISO 9001:2015
    Our company, whose 1,200m2 is closed, serving in a total area of ​​1,500m2, continues to metal processing and shaping works with the knowledge and experience of its founders, today has undertaken to fulfill the requirements of the ISO 9001: 2015 quality management system standard and to continuously improve its effectiveness.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    Certifications
    ISO 9001:2015
    HELLO WE ARE A COMPANY THAT HAS SET OUT TO SERVE OUR CUSTOMERS AROUND THE WORLD WITH OUR 15 YEARS OF EXPERIENCE IN OUR BUSINESS LIFE AND TRIES TO COMBINE THIS SERVICE WITH THE HIGHEST LEVEL OF QUALITY, TIMELY DELIVERY AND REASONABLE PRICE POLICY. OUR GOAL IS ALWAYS TO REACH BETTER QUALITY
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    2023
    Certifications
    The SITEK AG is a dynamic and reliable companies in the industry. It produces high-quality plastic parts and associated tools for a demanding clientele. We want to contribute to the long term success of our clients and work in partnership and permanently with you. Our mature parent-form concept enables you to relate complex plastic parts for small and medium series at affordable conditions, yet in Swiss quality. Together with you, the customer, and also with our suppliers as partners we are able to offer far more than just a plastic part in the situation. We see ourselves as a provider of total solutions from concept to the finished packaged assembly. Bützer assumes responsibility for protecting the environment and the health and safety of our employees by appropriate action. We ensure the development and independence of our family business fair profits which are reinvested at a substantial part of the company's progress. Part Sprektrum: - Housing, Housing - Cover, cover - Transmission cover - Pump housing - Display window - Cover, aperture - Gears, gear - Box, container - Hinge Range of machines: - Krauss Maffei - Arburg - Ergotech - Negri Bossi - Fehlmann - Agie - Charmilles Technologies: - Injection molding, injection molding, plastic injection molding - Ultrasonic Welding, Ultrasonic - Hand assembly, installation, assembly, screwing, plugging, clips, Klippsen - Insertion, insertion form - Bonding, potting, bonding - Coating, painting, electroplating - Mold design, mold - Die-sinking EDM, sinker EDM, wire cutting, wire EDM, Wire EDM Range of materials: - PEEK, Victrex - PA, Ultramid - PE - PP - PBT, Ultradur - POM, Delrin, Hostaform - PET - PSU - PPS, Fortron, Ryton - PPO - ABS, Cycolac - PC - PMMA - LCP, Vectra - PEI, Ultem - P
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1997
    Certifications
    ISO 9001:2015
    Welcome to CAD-Plast GmbH. We combine the latest standards with innovation and efficiency and combine the properties mentioned with years of experience and dynamism. In October 1999 a vision turned into a company. The trust in our competencies and the will to realize the ideas of our customers has paved this way for us. We face all challenges that the future demands with commitment and know-how, focusing on constant dynamism and progress for the benefit of our customers ... We manufacture with our team for our customers in the area Automotive Special mechanical engineering Medical technology Sporting goods in the fields of mechanical processing and mold construction as well as in plastics processing.
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    1999
    Certifications
    ISO 9001:2015
    You would like to make metallic components additive? Are you interested in the possibilities of this technology? With the additive manufacturing of 3D-printing metal (SLM, Laser-cusing®, DMLS etc.) we offer you a production technology that is no longer used only in prototype production. This process offers completely new possibilities where conventional processes such as laser cutting, turning or milling reach their limits. This is a process that is used exclusively for the production of metal. As with 3D printing, the components are built up by layer-by-layer build-up and fusion of metal powder; the component has almost identical mechanical properties to the original material. You need support in implementing your automation project? Then you are exactly right with us! We realize complete manufacturing cells according to your idea. From the feasibility study on the construction and assembly to commissioning and on-site support, we are the right partner for your project. In particular, we cover the following areas of responsibility: - Project Management - Programming - 3D printing metal (additive manufacturing) - Security management - 3D scanning - Milling technology - Construction - Assembly - Hose packages - Service - Training Our 3D metal printing services at a glance: - construction work (cooling ducts, component optimization, etc.) - Checking the cooling channel design (flow simulation, thermal images, flow analyzes) - coatings - Plastic prototypes - Component measurement - Creation of plastic models - 3D scanning / reverse engineering - fine machining (milling, grinding, eroding etc.) - Surface treatment (anodizing, electropolishing, etc.) - hardening - welding
    > Go to profile
    Employees
    20 - 50
    Year of foundation
    Certifications

    Watch

    Techpilot Premium Member
    TTPH GmbH
    We are a company from Austria in injection molding. The company was founded in 2010 with 4 injection molding machines. ! NEW BIO injection molding with material! Our production has grown to include 15 injection molding machines ranging from 15 -250 t clamping force. The systems are integrated in our network, all data from the SGM will be written to a database. MDE System, PMS System Available. Orders are processed very quickly and competently. Our customers are from the automotive industry, packaging industry and technical articles. We also have an ISO certification. About inquiries, we would be very happy.
    > Go to profile
    Employees
    10 - 20
    Year of foundation
    2008
    Certifications
    ISO 9001:2015
    As a system supplier for electromechanical assemblies, we manufacture plastic and metal components using hybrid technology. This means that we concentrate on the production technologies of plastic injection moulding and punching and bending of metal components. The advantage for you is that you can obtain ready-assembled assemblies of the most diverse production processes from one source. By moving Friedrich Joerg GmbH in 2016 to newly built production and office premises, we were able to create a capacitive buffer. Thanks to a high degree of automation, we can offer you particularly competitive prices. We manufacture manually in small series up to large series fully automated and pre-assemble all components for you. In short, we adapt flexibly to your requirements. We provide support as early as the product development stage in order to take into account quality, cost and tool-specific aspects in the early phase. We manufacture the necessary tools or devices in our own tool shop. This also allows us to increase our flexibility, for example in case of short-term changes. Furthermore, we also offer finishing processes such as: printing on plastic parts (cliché/pad printing), hot foil stamping for a particularly noble appearance of the products, machining and ultrasonic welding. It goes without saying that we are certified according to ISO 9001:2015 and deliver a very high and consistent quality. We would be pleased if you contact us. categories: Electromechanical assemblies; Foil hot stamping; Customised plastic mouldings; Plastic optical fibres; Optical fibre components; Optical fibre systems; Optical fibre technology; Optical fibre transmission systems; Pre-assembly Assembly of small parts for industry; Assembly of plastic components; Assembly of mechanical components; Stamp-bending parts made of stainless steel, non-ferrous metal, steel; Stamp-bending tools; Connectors; Connectors for surface mounting; Complete plug connections; Pad printing; Thermoplastic precision mouldings; Thermoplastic overmoulding with plastic; ultrasonic welding of plastics; overmoulding tools for insert parts; 3-D MID components; connecting terminals for power cables low voltage & high voltage; component assembly; die casting; mould making; housings for the electrical industry; terminals for electrical cables; plastic injection moulded parts; plastic injection moulded parts with metal insert; electrotechnical plastic parts; technical plastic parts; plastic processing; multi-component injection-moulded parts; plastic-injected metal parts; product development; prototype construction; terminal blocks; technical injection-moulded parts; thermoplastic elastomer (TPE) moulded parts; jig and fixture construction; toolmaking; two-component injection-moulded parts; Imprint: https://www.friedrich-joerg.com/kontakt/impressum/ Privacy policy: https://www.friedrich-joerg.com/kontakt/datenschutzerklaerung/
    > Go to profile
    Employees
    50 - 100
    Year of foundation
    1920
    Certifications
    ISO 9001:2015
    The Herbert Tiemann company was founded in Hamburg in 1962 and moved into its own production facility in Börnsen near Hamburg in 1998. In the beginning the company concerned with the production of electronic and electrical devices as well as the production of transformers and coils. In 1986, the company was expanded to include a further production area, "Plastic injection molding and mold tooling". We have many years of experience in injection molding and we are well equipped to implement your next project quickly and easily. We live cooperation based on partnership. We see ourselves not only as an implementing party, but also act as a consultant in which we examine each request individually. And if things have to be done quickly, we can also act as an extended workbench.
    > Go to profile
    Employees
    5 - 10
    Year of foundation
    1962
    Certifications
mehr anzeigen